Perioperative axial loading computed tomography findings in varus ankle osteoarthritis: Effect of supramalleolar osteotomy on abnormal internal rotation of the talus

BackgroundWe used axial loading computed tomography (AL CT) to evaluate preoperative and postoperative talocrural joints of patients who underwent supramalleolar osteotomy (SMO) to treat varus ankle osteoarthritis.MethodsWe performed retrospective analyses of 16 patients (18 feet) who underwent SMO including fibular osteotomy. Radiographic assessment was performed with weightbearing radiographs and AL CT. Clinical outcomes were assessed based on American Orthopedic Foot & Ankle Society (AOFAS) scale, visual analog scale (VAS) for pain, and Foot and Ankle Ability Measure (FAAM).ResultsThe mean 2-year follow-up tibial-ankle surface angle, talar tilt angle, Takakura stage, and tibial-lateral surface angle were all significantly different relative to preoperative parameters (P < .05). The mean 6-month follow-up talus rotation ratio was significantly corrected compared to the preoperative value (P = .001). The mean 2-year follow-up AOFAS, VAS at gait, and FAAM scores were all significantly improved relative to preoperative measurements (P = .001).ConclusionsAbnormal internal rotation of the talus in mild to moderate varus ankle osteoarthritis found on AL CT was significantly corrected after SMO.Level of evidenceTherapeutic Level IV     

Arthroscopic ankle arthrodesis: Are results reproducible irrespective of pre-operative deformity?

BackgroundArthroscopic ankle arthrodesis is gaining in popularity. It has been shown to have a shorter time to union and less morbidity than traditional open procedures. The arthroscopic technique has been mainly used for ankles with minimal deformity. Our aim was to find out whether we could reproduce the good results of arthroscopic ankle arthrodesis in both minimally and markedly deformed ankles.MethodsWe reviewed 62 patients who underwent an arthroscopic ankle arthrodesis for end stage arthritis. The average follow up was 63 months (range 21–92 months). Patients were evaluated subjectively and objectively using the Mazur grading system. 4 patients died before final review and 3 were lost to follow-up leaving 55 patients for evaluation.The pre-operative tibiotalar angle in the coronal plane was between 26° valgus and 24° varus. We divided our patients into 2 groups based on the tibiotalar angle. Group A (n = 31) had a varus or valgus deformity of less than 15? and Group B (n = 24) had a deformity equal to or more than 15°.ResultsThe overall fusion rate was 91%. Fusion occurred in 29 of 31 (94%) ankles in Group A compared to 21 of 24 (88%) in Group B (p = 0.64).The overall mean time to union was 10.4 weeks. The time to union in Group A was 8.8 weeks compared to 12.7 weeks for Group B (p = 0.001). Using the Mazur ankle grading system, 84% of the cases in Group A had a good to excellent result compared to 79% in Group B (p = 0.73). There were 2 superficial infections, 2 cases of deep vein thrombosis and 3 patients required removal of prominent screws.ConclusionsWe have shown that arthroscopic ankle arthrodesis yields reliable and reproducible results in a District General Hospital setting with high union rates, short time to union and low complication rates. It can be satisfactorily employed for ankles with significant deformity, although this resulted in a longer time to union. The end results remain uniformly good to excellent.     

Internal tibial torsion is related to syndesmosis injury in a large osteological collection

BackgroundThe long-term consequences of tibial torsion remain unclear. This study evaluated whether syndesmotic injuries are associated with tibial torsion.MethodsA collection of over 3000 cadaveric skeletons was screened for irregular bony prominence along the lateral distal tibia, consistent with previous syndesmosis injury. Tibial torsion was measured and compared to 1034 control cadaveric tibiae.ResultsMean torsion of 236 specimens with syndesmotic injury was 6.2 ± 8.9 degrees, while that of control specimens was 7.9 ± 8.8 degrees (P = 0.008). Multiple regression analysis showed a non-statistically significant trend toward internal torsion and syndesmotic injury (standardized beta = −0.051, P = 0.059). Syndesmosis injury was present in 48/200 specimens (24.0%) with internal torsion and 31/199 specimens (15.6%) with external torsion (P = 0.035).ConclusionThis association between internal tibial torsion and syndesmotic injury suggests that internal tibial torsion might not be an entirely benign condition and merits further study.     

Doctor,when can I drive? — Range of functional ankle motion during driving

BackgroundDriving a motor vehicle needs a specific joint mobility and yet only limited knowledge exists regarding the necessary ankle range of motion. The goal of this study is to characterize the sequence and range of ankle motion.MethodsThe arc of plantarflexion/dorsiflexion and supination/pronation was recorded in the right and left ankle using electrogoniometers while thirty laps were driven by fifteen healthy participants around a course in a manual transmission car with a left sided steering wheel. The driver was required to perform the following maneuvers during each lap: (I) Vehicle acceleration and gear change, (II) Sudden evasion, (III) Routine turning, (IV) Rapid turning, (V) Vehicle acceleration followed by emergency braking.ResultsDriving required the right ankle to plantarflex 13 ± 9 and dorsiflex 22 ± 7 while supinating 15 ± 7 degrees and pronating minimally. The left ankle plantarflexed 19 ± 10and dorsiflexed 17 ± 10 while supinating 15 ± 7 degrees and pronating minimally. The right ankle dorsiflexed significantly more (p = 0.00), and yet the left ankle had a significantly higher maximum plantarflexion and range of plantarflexion/dorsiflexion (p = 0.00). Emergency braking resulted in a significantly higher maximum plantarflexion as well as plantarflexion/dorsiflexion range when compared to other maneuvers.ConclusionThis study describes the range of ankle motion identified to drive a car with a manual transmission and a left-sided steering wheel. The right and left ankle exhibit different arcs of motion during driving. This knowledge may assist when evaluating a patient’s driving capability. Further studies are needed to investigate whether movement restrictions impair driving.Level of evidenceBasic science study.     

Primary stability and stiffness in ankle arthrodes—Crossed screws versus anterior plating

BackgroundAnkle arthrodesis is commonly used for the treatment of osteoarthritis or failed arthroplasty. Screw fixation is the predominant technique to perform ankle arthrodesis. Due to a considerable frequency of failures research suggests the use of an anatomically shaped anterior double plate system as a reliable method for isolated tibiotalar arthrodesis. The purpose of the present biomechanical study was to compare two groups of ankle fusion constructs – three screw fixation and an anterior double plate system – in terms of primary stability and stiffness.MethodsSix matched-pairs human cadaveric lower legs (Thiel fixated) were used in this study. One specimen from each pair was randomly assigned to be stabilized with the anterior double plate system and the other with the three-screw technique. The different arthrodesis methods were tested by dorsiflexing the foot until failure of the system, defined as rotation of the talus relative to the tibia in the sagittal plane. Experiments were performed on a universal materials testing machine. The force required to make arthrodesis fail was documented. For calculation of the stiffness, a linear regression was fitted to the force–displacement curve in the linear portion of the curve and its slope taken as the stiffness.ResultsFor the anatomically shaped double-plate system a mean load of 967 N was needed (range from 570 N to 1400 N) to make arthrodesis fail. The three-screw fixation method resisted a mean load of 190 N (range from 100 N to 280 N) (p = 0.005). In terms of stiffness a mean of 56 N/mm (range from 35 N/mm to 79 N/mm) was achieved for the anatomically shaped double-plate system whereas a mean of 10 N/mm (range from 6 N/mm to 18 N/mm) was achieved for the three-screw fixation method (p = 0.004).ConclusionsOur biomechanical data demonstrates that the anterior double-plate system is significantly superior to the three-screw fixation technique for ankle arthrodesis in terms of primary stability and stiffness.     

Articular and angular dimensions of the talus: Inter-relationship and biomechanical significance

Summary of background dataResearch on biomechanics of the ankle and foot has demonstrated a complex pattern of load distribution through the ankle joint.ObjectiveInvestigating possible relationship between articular dimensions, angular parameters and overall talar morphology.MethodsTwo linear dimensions, six articular surfaces and three angular parameters were measured from dried human talar bones (left = 60; right = 82). Angular parameters were measured at the neck of the bone (junction of the head and the body). Correlation and co-variation were worked out between the values of surface area parameters and the angular orientations measured from all the samples in context of load transmission across the talus.ResultsThe total trochlear surface area of the talus totaled approximately equal to the sum of areas at the head and the lower surface of the talus. The vertical angle showed a strong correlation with the articulating surface area below the head of the talus in contact with the spring ligament.ConclusionsArticular surface areas as well as the angular orientations of talar components vary with the magnitude of stress subjected to the bone. The inter-relationship between articular and angular parameters within the talus demonstrates strong correlation for certain parameters.     

Eccentric ankle arthritis in the sagittal plane: a novel description of anterior and posterior ankle arthritis

BackgroundTo report radiographic characteristics of anterior and posterior ankle arthritis, which demonstrates the eccentric narrowing of either aspect of the tibiotalar joint in the sagittal plane.MethodsRadiographic analysis of 19 ankles with anterior arthritis and 16 ankles with posterior arthritis was performed, which were defined as having both (1) eccentric narrowing of the anterior or posterior tibiotalar joint space on lateral radiographs and (2) talar tilt angle less than 4 degrees on anteroposterior radiographs. Measured radiographic parameters were: Talar tilt angle, medial distal tibial angle (MDTA), talar center migration (TCM), anterior distal tibial angle (ADTA), tibial axis-to-talus ratio (TT ratio), talo-first metatarsal (Meary) angle, hindfoot alignment angle (HAA), hindfoot moment arm, and mechanical axis deviation (MAD). An Intergroup comparison analysis, including a normal control group, was also performed.ResultsThe TT ratio was significantly different between each group, indicating a distinct talus position in the sagittal plane. The anterior group had a significantly larger TCM than the control group and lower ADTA compared to other groups, indicating medial translation of the talus and anterior opening of the tibial plafond. The posterior group demonstrated a significantly higher Meary angle and lower HAA compared to other groups and lower MDTA compared to the control group, indicating lower medial longitudinal arch, valgus heel alignment, and varus tibial plafond. The MAD was significantly higher in both the anterior and posterior groups than the control group, indicating varus lower limb alignment.ConclusionAnterior ankle arthritis demonstrated anteromedial translation of the talus and anterior opening of the tibial plafond. Posterior ankle arthritis was associated with the lower medial longitudinal arch and hindfoot valgus, indicating an association with flatfoot deformity. Both anterior and posterior ankle arthritis were associated with varus lower limb alignment.     

Complications following radiosynoviorthesis in osteoarthritis and arthroplasty: Osteonecrosis and intra-articular infection

ObjectivesIn the literature, radiosynoviorthesis (RSO) has been associated only with a small number of complications. There is a trend towards increasing the use of RSO in diverse indications. After repeatedly observing several complications following RSO, a retrospective evaluation was undertaken to estimate the safety of this method.MethodsBetween 1995–2007, we evaluated the outcome of RSO in 93 patients (143 knees, seven hips, seven shoulders, three elbows, one ankle) who presented to our orthopaedic department after joint treatment with yttrium-90(⁹⁰Y) or Rhenium-186(¹⁸⁶Re) colloid in an external nuclear medicine institution.ResultsSeventy-nine of the 93 RSO treated patients had advanced primary or secondary osteoarthritis (OA), 12 had an arthroplasty. In seven cases, rheumatoid arthritis (RA) was responsible for secondary OA. The benefit in pain relief, as self-reported by the patients was low. Twenty-two of the 93 patients showed complications following RSO. We observed osteonecrosis (ON) in 19 and infection in five patients, including two with both complications. These findings were proven clinically, radiologically, intraoperatively, microbiologically and histologically. Statistical analysis revealed a strong correlation of arthroplasty to infection (ρ = 0.798, α = 0.01), and a strong correlation of chronic obstructive pulmonary disease (COPD) and RA to ON following RSO (ρ = 0.674, α = 0.01). Diabetes mellitus (DM) was also significantly correlated to ON after RSO treatment (ρ = 0.488, α = 0.05).ConclusionsOur data suggest that RSO may not be as safe as it has previously been reported, especially in advanced OA and arthroplasty.     

Effect of Total Knee Arthroplasty on Coronal Alignment of the Ankle Joint

BackgroundThe effect of total knee arthroplasty (TKA) on the ankle joint is not entirely clear. The purpose of this study is to assess postoperative changes in the coronal alignment of the ankle joint in patients undergoing TKA for various degrees of knee deformity.MethodsThis retrospective study included 107 patients who had undergone TKA for primary osteoarthritis. In all cases, preoperative coronal alignment deformity of the knee was corrected in an attempt to restore the native mechanical axis of the knee. Patients were stratified into 3 groups according to the degree of knee coronal alignment correction achieved intraoperatively: group 1 (<10° varus/valgus correction, n = 60), group 2 (≥10° varus correction, n = 30), and group 3 (≥10° valgus correction, n = 17). Knee/ankle alignment angles were measured on full-length, standing anteroposterior imaging preoperatively and postoperatively and included the following: hip-knee-ankle angle, tibial plafond inclination (TPI), talar inclination (TI), and tibiotalar tilt angle.ResultsSignificant changes in ankle alignment, specifically with regard to TPI (9.5° ± 6.9°, P < .01) and TI (8.8° ± 8.8°, P = .03) were noted in the ≥10° valgus correction group compared to the other 2 groups. Regardless of the degree of knee deformity correction, TKA did not lead to significant changes in the tibiotalar tilt angle.ConclusionA correction of ≥10° in a genu valgum deformity can affect ankle joint alignment, leading to alterations in TPI and TI. These findings need to be taken into consideration in assessing candidates for TKA as a possible cause of postoperative ankle pain.     

Intraobserver and interobserver reliability of cone beam weightbearing semi-automatic three-dimensional measurements in symptomatic pes cavovarus

IntroductionPes cavovarus is a three-dimensional (3D) foot deformity. New 3D semi-automatic measurements utilising weightbearing computerised topography (WBCT) images have recently been proposed to assess hindfoot alignment, but reliability in pes cavovarus has never been investigated. The aim of this study was to assess intraobserver and interobserver reliability of the foot ankle offset (FAO), calcaneal offset (CO) and hindfoot alignment angle (HAA) in pes cavovarus.MethodsAnonymised WBCT datasets from 51 feet (17 Charcot-Marie-Tooth related cavovarus, 17 idiopathic cavovarus and 17 controls) were retrospectively reviewed. Three observers (two senior foot and ankle fellows and one orthopaedic resident) independently measured FAO, CO and HAA using dedicated software, with measurements repeated two weeks apart. Subgroup analysis was performed to assess whether aetiology or severity of varus deformity and level of seniority affected reliability.ResultsMean values for intra and interobserver reliability for FAO (r = 0.98; ICC: 0.99), CO (r = 0.97; ICC: 0.98) and HAA measurements (r = 0.97; ICC: 0.98) were excellent. Subgroup analyses showed that FAO, CO and HAA's intra (r/ρ range, 0.77–0.95) and interobserver (ICC range, 0.88–0.98) reliability remained excellent in patients with Charcot-Marie-Tooth related cavovarus, idiopathic pes cavovarus and normal feet, regardless of the severity of deformity. No difference was found in FAO, CO and HAA mean values from three observers (p > 0.05 in all cases).DiscussionThis study demonstrates that 3D semi-automatic measurements of WBCT images have excellent intra and interobserver reliability in the assessment of hindfoot alignment in pes cavovarus. Aetiology and severity of deformity, and level of seniority do not affect reliability of these measurements.Level of evidenceLevel III, retrospective comparative study.     

Versatility of Ilizarov technique in difficult cases of ankle arthrodesis and review of literature

BackgroundAnkle arthrodesis is a well-established procedure that has been successfully used for treatment of end stage arthritis of the ankle for well over a century. Internal fixation for ankle arthrodesis is adequate in most of the cases. However, surgeons and patients are occasionally confronted with cases in need for ankle arthrodesis but do not lend itself well to the ideal position and/or internal fixation. These cases may even contraindicate internal fixation. The aim of this study is to assess the results of ankle arthrodesis using different modalities of Ilizarov techniques and demonstrating its high versatility in treating such difficult cases.Patients and methodsThis is a prospective study. Thirty cases of ankle fusion for end stage arthritis or instability were performed in the period between January 2002 and December 2007 at the Health Insurance Reference Hospitals, Alexandria, Egypt. Tibiotalar fusion was done in 22 cases and tibiocalcaneal fusion in 8 cases using different modalities of Ilizarov technique. The mean follow up period was 5.5 years (range 4–8, SD 1.9).ResultsSound and painless fusion was achieved in all the cases except one (97%). The difference between the mean preoperative and postoperative American Orthopaedic Foot and Ankle Society (AOFAS) was found to be statistically highly significant (t = 10.1, p = 0.001). Many minor complications were encountered during the course of treatment in the form of: pin tract infections, wound dehiscence, cellulitis that was managed effectively with local wound care, oral antibiotics.ConclusionThe versatility of the combinations of assemblies afforded by Ilizarov fixator was found to be endless. This makes the Ilizarov fixator to be an effective and versatile mean of treating difficult cases of ankle arthrodesis.     

Kinematic analysis of ankle stiffness in subjects with and without flat foot

BackgroundAlthough the magnitude of ankle motion is influenced by joint congruence and ligament elasticity, there is a lack of understanding on ankle stiffness between subjects with and without flat foot.ObjectiveThis study investigated a quantified ankle stiffness difference between subjects with and without flat foot.MethodsThere were forty-five age- and gender-matched subjects who participated in the study. Each subject was seated upright with the tested foot held firmly onto a footplate that was attached to a torque sensor by the joint-driving device.ResultsThe flat foot group (mean ± standard deviation) demonstrated increased stiffness during ankle dorsiflexion (0.37 ± 0.16 for flat foot group, 0.28 ± 0.10 for control group; t = −2.11, p = 0.04). However, there was no significant group difference during plantar flexion (0.35 ± 0.15 for flat foot group, 0.33 ± 0.07 for control group; t = 0.64, p = 0.06).ConclusionThe results of this study indicated that the flat foot group demonstrated increased ankle stiffness during dorsiflexion regardless of demographic factors. This study highlights the need for kinematic analyses and joint stiffness measures during ankle dorsiflexion in subjects with flat foot.     

Are bilateral tibial shaft fractures associated with an increased risk for adverse outcome?

IntroductionLong bone fractures are assumed to be an independent risk factor for systemic complications and death after trauma. Multiple studies have identified an increased risk for mortality and morbidity in patients with bilateral femoral fractures. Data about bilateral tibial shaft fractures is rare. The aim of our study was to analyze if patients with bilateral tibial shaft fractures are at higher risk for systemic complications.MethodsWe performed a retrospective analysis of the TraumaRegister DGU^® from 1993 to 2008. Inclusion criteria were unilateral or bilateral tibial shaft fractures and an age ≥16. Additionally to the overall collective we analyzed different subgroups (divided into different injury severities and treatment periods).Results1899 patients with unilateral and 175 patients with bilateral tibial shaft fractures were included. Age, gender and mean ISS (25.8 vs. 26.2, p = 0.51) in the two groups were comparable. Regarding the entire study population, patients with bilateral tibial shaft fractures showed no significant higher incidence of respiratory organ failure (29.5% vs. 23.1%, p = 0.076) or mortality (20.0% vs. 16.3%, p = 0.203). However, subgroup analysis showed a significant higher rate of pulmonary organ failure for bilateral tibial shaft fractures as compared to unilateral tibial shaft fractures in the group ISS < 25 (20.7% vs. 11.7%, p = 0.023). Multivariate regression analysis identified the additional tibial shaft fracture as an independent risk factor for pulmonary organ failure (OR = 1.56) but not for mortality.DiscussionThe additional tibial shaft fracture is an independent risk factor for pulmonary organ failure but not for multiple organ failure or mortality. The impact of the additional tibial shaft fracture is especially pronounced in less severely injured patients (ISS < 25). These findings are comparable to results of bilateral femoral fracture studies and we therefore suggest to treat patients with bilateral tibial shaft fractures with the same caution as those with bilateral femoral fractures.     

Reliability and validity of measures of hammer toe deformity angle and tibial torsion

BackgroundMeasures of second–fourth metatarsophalangeal joint (MTPJ) angle (indicator of hammer toe deformity) and clinical measures of tibial torsion have limited evidence for validity and reliability. The purposes of this study are to determine: (1) reliability of using a 3D digitizer (Metrecom) and computed tomography (CT) to measure MTPJ angle for toes 2–4; (2) reliability of goniometer, 3D digitizer, and CT to measure tibial torsion; (3) validity of MTPJ angle measures for toes 2–4 using goniometry and 3D digitizer compared to CT (gold standard) and (4) validity of tibial torsion measures using goniometry and 3D digitizer (Metrecom) compared to CT (gold standard).MethodsTwenty-nine subjects participated in this study. 27 feet with hammer toe deformity and 31 feet without hammer toe deformity were tested using standardized gonimetric, 3D digitizer and CT methods. ICCs (3,1), standard error of the measurement (SEM) values, and difference measures were used to characterize intrarater reliability. Pearson correlation coefficients and an analysis of variance were used to determine associations and differences between the measurement techniques.Findings3D digitizer and CT measures of MTPJ angle had high test–retest reliability (ICC = 0.95–0.96 and 0.98–0.99, respectively; SEM = 2.64–3.35° and 1.42–1.47°, respectively). Goniometry, 3D digitizer, and CT measures of tibial torsion had good test–retest reliability (ICC = 0.75, 0.85, and 0.98, respectively; SEM = 2.15°, 1.74°, and 0.72°, respectively). Both goniometric and 3D digitizer measures of MTPJ angle were highly correlated with CT measures of MTPJ angle (r = 0.84–0.90, r = 0.84–0.88, respectively) and tibial torsion (r = 0.72, r = 0.83). Goniometry, 3D digitizer, and CT measures were all different from each other for measures of hammer toe deformity (p < 0.001). Goniometry measures were different from CT measures and 3D digitizer measures of tibial torsion (p < 0.002). CT measures and 3D digitizer measures of tibial torsion were similar (p = 0.112).InterpretationsThese results suggest that 3D digitizer and CT scan measures of MTPJ angle and goniometric, 3D digitizer, and CT scan measures of tibial torsion are reliable. Goniometer and 3D digitizer measures of MTPJ angle and tibial torsion measures are highly correlated with the gold standard CT method indicating good validity of measures, but the measures are not interchangeable.     

The effect of foot type on the Achilles tendon moment arm and biomechanics

BackgroundThe aim was to calculate the Achilles tendon moment arm in different degrees of plantarflexion for pes planus, pes cavus and normal arched feet.Methods99 patients (99 radiographs; 40 males, 59 females; mean age 49 years, SD 15) with a healthy ankle joint and a preoperative weightbearing lateral radiograph of the foot were included. Three groups (pes planus, pes cavus and normal-arched feet) with equal sample sizes (n = 33) were formed. On radiographs, the angle formed between a horizontal line and the line connecting the insertion of the Achilles tendon with the center of rotation of the ankle, was measured. The interrater reliabilities (ICC) of the angle alpha were compared on radiographs and on MRIs. Using the angle alpha, the Achilles tendon moment arm was calculated in different plantarflexion positions.ResultsThe ICC of alpha was higher on radiographs (0.84, [0.73–0.91]) than on MRIs (0.61, [0.27–0.81]). The average alpha was statistically significantly different (normal arched foot 31 degrees (°), pes planus 24°, pes cavus 36°, p = 0.021), resulting in a significant shorter Achilles tendon moment arm for pes cavus than for pes planus (p < 0.0001) and normal arched feet (p = 0.006) in neutral position.ConclusionThe data suggests that it is feasible to use radiographs to measure the Achilles tendon moment arm. The maximum Achilles tendon moment arm is reached at different angles of ankle flexion for pes cavus, pes planus and normal-arched feet. This has to be taken into consideration when planning surgeries.     

The geometrical axis of the talocrural joint—Suggestions for a new measurement of the talocrural joint axis

BackgroundDespite intensive research there is no consensus about the talocrural joint axis. The aim of the present study is a new method to determinate the geometric rotational axis of the talocrural joint.MethodsWe analyzed 98 CT-scans of full cadaver Caucasian legs. We generated three-dimensional reconstruction models of the talus. A best fitting cone was orientated to the talar articular surface. The geometric rotational axis was defined to be the axis of this cone.ResultsThe geometric rotational axis of the talocrural joint is orientated from lateral–distal to medial–proximal (85.6° ± 10 compared to anatomical tibial axis in torsional plane), from posterior–distal to anterior–proximal (81.43° ± 44.35 compared to anatomical tibial axis in sagittal plane) and from posterior–medial to anterior–lateral (169.2° ± 5.91 compared to intermalleolar axis in axial plane).ConclusionsThe consideration of our results might be helpful for better understanding of ankle biomechanics.     

External versus internal fixation for arthrodesis of chronic ankle joint infections — A comparative retrospective study

BackgroundArthrodesis of the ankle is a salvage procedure in case of chronic ankle joint infection. External fixation still is the gold standard.We compared the outcome of external fixator versus intramedullary nailing for arthrodesis of the infected ankle joint.MethodsAll patients with ankle joint infection who received arthrodesis with either external fixator or intramedullary nail between 08/2009 and 09/2017 were retrospectively analyzed. Endpoints were the successful control of infection, osseous fusion, and mobilization with full weightbearing.ResultsSeventy-one patients were included. Nineteen patients (27%) suffered reinfection. Patients with intramedullary nailing showed significantly fewer reinfections (p = 0.019), achieved full weightbearing significantly more often (p = 0.042) and faster and developed significantly fewer complications (p < 0.001). Forty-three patients showed bone fusion without significant differences between the groups.ConclusionsAnkle arthrodesis with intramedullary nailing appears to be a successful alternative to the established procedure of external fixation in cases of chronic ankle joint infection.     

Is there a learning curve in foot and ankle surgery?

BackgroundPrevious studies of orthopaedic learning curves have largely described the introduction of new techniques to experienced consultants. End points have usually involved technical considerations. A paucity of evidence surrounds foot and ankle surgery. This study investigates the learning curve during a foot and ankle surgeon's first year, defined by functional outcome.Methods150 patients underwent elective foot or ankle surgery during the whole period. Preoperative and 6 month postoperative functional scores were compared between the first and second 6 month groups.ResultsFunctional improvement was greater, approaching significance, in the second group (p = 0.0605). There was no difference for forefoot cases (p = 0.345). Functional improvement was significantly greater in the second group with forefoot cases removed (p = 0.0333).ConclusionsA learning curve exists in the first year of practice of foot and ankle surgery, demonstrated by functional outcome. This is confined to ankle, hindfoot and midfoot, but not forefoot surgery.     

Computer-assisted surgery (CAS) based correction of posttraumatic ankle and hindfoot deformities—Preliminary results

The first clinical experiences with a computer assisted surgery based (CAS) guided correction arthrodeses at ankle, hindfoot and midfoot were evaluated.MethodsTime spent, accuracy, surgeons’ rating (Visual Analogue Scale [VAS], 0–10 points) were analyzed. The accuracy was assessed by ISO-C 3D (Siremobile™, Siemens, Germany).Results10 patients were included (ankle, n = 3; subtalar joint, n = 6; ankle and subtalar joint, n = 2; Lisfranc joint, n = 1). Time needed for preparation was 500 s (400–900). The correction process took 45 s (30–60). All angles/translations were achieved as planned before surgery (≤ ±1°/±1 mm). The ratings of the three involved surgeons were: feasibility, 9.5 (9–10); accuracy 9.8 (9.5–10); clinical benefit 9 (8–10).ConclusionsCAS guided correction of posttraumatic deformities of the ankle and hindfoot region provides very high accuracy and a fast correction process. The significance of the introduced method may be high in those cases, because the improved accuracy may lead to an improved clinical outcome.