Failure of the Tibial Insert in a Rotating Hinge Total Knee Arthroplasty

There has been a steady increase in the number of revision total knee arthroplasties being performed in the United States. Hinge knee prostheses are used predominantly in complex primary or revision arthroplasties, often as salvage procedures. Significant improvement of the articulation between the rotating hinge mechanism and tibial component has decreased the stresses that contributed to earlier failures in previous generation designs. Two cases of fracture of the tibial metal post in the rotating hinge of a revision total knee arthroplasty were evaluated and treated at our institution within a 1-month period. We present our experience with this construct failure and subsequent patient management.     

Cementless Metaphyseal Sleeves Used for Large Tibial Defects in Revision Total Knee Arthroplasty

Revision arthroplasty of large tibial defects remains a challenge. Thirty revision knee arthroplasties using a porous titanium tibial sleeve for Anderson Orthopaedic Research Institute (AORI) Type 2B and Type 3 defects with minimum 2 year follow up were retrospectively reviewed. The average Knee Society Score increased from 55 pre-operatively to 92 post-operatively. Six patients had a repeat operation though none were sleeve related. All radiographs at final follow-up showed well fixed components with osseous in-growth. Seven patients had end-of-stem pain, four of which resolved. Our short-term results show that porous titanium sleeves are a promising option when managing large areas of metaphyseal bone loss by filling defects and providing stable construct with biologic fixation.     

Metaphyseal Stem Extension Improves Tibial Stability in Cementless Total Knee Arthroplasty

BackgroundThe goal was to determine if the addition of a metaphyseal stem extension limits micromotion of a cementless tibial component during cyclic loading in primary total knee arthroplasty. The hypothesis tested was that the use of a 50-mm stem extension on a cementless tibial component would limit motion compared with an identical cementless component without a stem extension.MethodsThe study used 3 variations of a tibial component from the same total knee arthroplasty system. Group 1 consisted of a cementless tibial component without a stem extension. Group 2 used the same cementless component as group 1, but with the addition of a short 50-mm stem. Group 3 consisted of a cemented tibial component without a stem extension to serve as a “control” (gold standard). The tibial specimens were implanted into a synthetic bone model and tested using a physiological medial-lateral 60/40 load distribution for 5000 cycles.ResultsThe results demonstrated a significant decrease in motion at the anterior region of the cementless stem extension (group 2) components compared with the cementless with no stem extension (group 1). The cementless with stem extension (group 2) demonstrated similar results at all cycles to the cemented (group 3) components at the anterior region.ConclusionThe addition of a short metaphyseal stem (50mm) to a keel plus 4-peg tibial component design provides a significant reduction in micromotion during cyclic loading of a cementless tibial baseplate in a synthetic foam bone model, similar to a cemented implant.     

Impact of Tibial Component Coronal Alignment on Knee Joint Biomechanics Following Fixed‐bearing Unicompartmental Knee Arthroplasty: A Finite Element Analysis

ObjectiveUnicompartmental knee arthroplasty (UKA) has indicated a higher rate of revision than total knee arthroplasty (TKA). The success of UKA depends on UKA component alignment, fixation, and soft tissue integrity. The purpose of this study was to investigate the effects of different tibial component alignments in the coronal plane on the stress distribution in UKA. It was hypothesized that the stress distribution would approach native knee when the tibial component was neutrally positioned.MethodsThe left legs from two healthy volunteers were considered to represent the geometric native knee models. All bones within the knee joint were extracted from the three‐dimensional (3D) computed tomography (CT). MRI was used to generate cartilage, menisci, and four major ligaments. The UKA components were virtually implanted in the medial compartment of the knee model using MIMICS. A total of five different configurations of UKA tibial obliquity in the coronal plane (neutral, 3° varus, 6° varus, 3° valgus, and 6° valgus) were adopted and investigated. Subject‐specific inhomogeneous material properties of bones were used in the finite element analysis (FEA) model. The von Mises stress in the tibia platform and proximal tibia, and the load distribution between the medial and lateral compartments were extracted and compared among the five different configurations.ResultsThe inhomogeneous material properties of the trabecular bone were closer to real physics than traditional homogeneous methods. Neutral and 3° varus alignments of the tibial component in the coronal plane have better stress distribution between medial and lateral compartment as healthy knee models, and less stress‐shielding effects than other UKA configurations. The stress pathway under the medial tibia platform in neutral and 3° varus UKA configurations was similar and more obvious than the other three UKA configurations. Notably, the stress of the medial tibia platform in the 3° varus UKA models was more homogenous than the neutral UKA configuration. The 6° varus, 3° valgus, and 6° valgus UKA models had higher stress at the location of anterolateral and posterolateral tibia platform than other UKA configurations.ConclusionNeutral or 3° varus positioned in the coronal plane for the tibial component could be the optimal alignment for UKA. Excessive varus or valgus obliquity in the coronal plane lead to significant differences in bone stress transfer and load distribution in the knee, and increase the risk of UKA failure.     

Cementless vs Cemented Tibial Fixation in Primary Total Knee Arthroplasty

Background

The ideal fixation for modern tibial components in total knee arthroplasty (TKA) remains controversial with uncertainty on whether cementless implants can yield equivalent outcomes to cemented fixation in early follow-up.

Analysis of Stem Tip Pain in Revision Total Knee Arthroplasty

Stem tip pain following revision total knee arthroplasty is a significant cause of patient dissatisfaction, which in the presence of an aseptic well-fixed component has no widely accepted surgical solution. A definitive cause of stem tip pain remains elusive, however it has been suggested that high stress concentrations within the region of the stem tip may play a role. This paper reports a finite element study of a novel clinical technique where a plate is attached to the tibia within the region of the stem tip to reduce stem tip pain. The results demonstrate that the plate reduces stress concentrations in the bone at the stem tip of the implant. The magnitude of stress reduction is dependent upon plate location, material and attachment method.     

Tibial Component Migration After Total Knee Arthroplasty With High-Viscosity Bone Cement

BackgroundHigh-viscosity (HV) bone cements have been formulated to offer potentially advantageous handling characteristics. However, alteration in the handling characteristics could influence implant fixation and survival. The primary objective of this study was to use radiostereometric analysis after total knee arthroplasty to assess the migration of the Triathlon tibial component fixed with HV cement (Simplex HV).MethodsTwenty-three patients were followed for two years with radiostereometric analysis examinations at 6 visits. Migration was compared with published thresholds and with a control group from a previously published study from the same center using the same implants fixed with a medium viscosity cement. Inducible displacement was assessed, and Oxford 12 Knee Scores and satisfaction were recorded.ResultsMean maximum total point motion migration reaching 0.40 mm (SD 0.16) at one year, and 0.41mm (SD 0.17) at two years, demonstrating a pattern of stable fixation, below published thresholds of acceptable migration, and not significantly different from the control group. One implant had continuous migration between 1 and 2 years but was clinically asymptomatic. Mean maximum total point motion inducible displacement measured at least one year postoperatively was 0.3 mm (SD 0.12). Mean Oxford 12 Knee Scores improved from 19 (SD 7) preoperatively to 42 (SD 8) 2 years postoperatively.ConclusionsThe use of HV cement demonstrated an acceptable pattern of migration at 2 years, indicating low risk for aseptic loosening.     

Tibial Component Alignment After Total Knee Arthroplasty with Intramedullary Instrumentation: A Prospective Analysis

The best operative technique for achieving appropriate postoperative alignment following total knee arthroplasty (TKA) remains controversial, with proponents of extramedullary, intramedullary and computer-assisted techniques. One hundred ninety-two consecutive patients undergoing TKA were prospectively evaluated with full-length lower extremity radiographs. Patients underwent cemented TKA using femoral and tibial intramedullary instrumentation. Digital radiographs were analyzed using PACS (AGFA Healthcare, Ridgefield Park, NJ) software. Tibial component alignment was measured in the coronal and sagittal planes. Tibial component slope averaged 3.89° + 1.96 for the cruciate-retaining components and averaged 1.7° + 1.92 for PS components. The average coronal tibial component alignment was 90.00°, and 99% were within 3° of neutral mechanical alignment with only 2 (1%) outliers. Intramedullary instrumentation resulted in excellent postoperative tibial component and lower extremity alignment.     

Patellar Resurfacing in Total Knee Arthroplasty: A Cost-Effectiveness Analysis

Background

This study estimates the cost-effectiveness of patellar resurfacing in total knee arthroplasty (TKA).

A Biomechanical Foot-Worn Device Improves Total Knee Arthroplasty Outcomes

Background

Biomechanics after total knee arthroplasty (TKA) often remain abnormal and may lead to prolonged postoperative recovery. The purpose of this study is to assess a biomechanical therapy after TKA.

Cemented Versus Cementless Fixation of a Tibial Component in LCS Mobile-Bearing Total Knee Arthroplasty Performed by a Single Surgeon

Although cemented tibial fixation of total knee arthroplasty accepted as the gold standard, cementless fixation as a means to supplement disadvantages of cemented fixation continues to be of interest to clinicians. One hundred sixty-eight consecutive knees undergoing primary knee arthroplasty for osteoarthritis were randomly assigned to receive either a cemented (86 knees) or cementless (82 knees) fixation of tibial component. We report the outcomes at 8 to 11 years (mean, 9.5). The mean KSS, the HSS score, the mean WOMAC, the mean ranges of knee movement and radiological results were similar in both groups. No osteolysis was identified in either group. The rate of survival of the femoral and tibial components was 100% in both groups at final follow-up.     

Total Knee Arthroplasty After Intramedullary Tibial Nail: A Matched Cohort Study

BackgroundAs the use of intramedullary nails (IMNs) has become more common, there are an increasing number of patients requiring total knee arthroplasty (TKA) who have an indwelling tibial IMN. The purpose of this study is to compare implant survivorship, clinical outcomes, and complications in patients undergoing primary TKA with a history of tibial IMN to those without.MethodsWe retrospectively identified 24 TKAs performed between 2000 and 2017 after ipsilateral tibial IMN. Patients were matched 1:2 to patients undergoing primary TKA without history of tibial IMN based upon age, gender, body mass index, and year of surgery. Mean follow-up was 7 years.ResultsThe 10-year survivorship free of any revision was 100% for the tibial IMN cohort, and 96% for the control cohort, while the 10-year survivorship free of any reoperation was 91% and 89%, respectively (P = .72). Patients with a history of tibial IMN had similar Knee Society Scores to matched controls at 2 years (P = .77) and 5 years (P = .09). Acquired idiopathic stiffness trended toward being more common (17% vs 6%, P = .21) and operative time trended toward being longer (135 vs 118 min, P = .07) when the tibial IMN was removed, but there was no overall difference in complication rate between cohorts.ConclusionsTo our knowledge, this is the first report of primary TKA in patients with a history of ipsilateral tibial IMN. Compared to a matched cohort of patients without tibial IMN, these patients have similar outcomes in regards to implant survivorship, clinical outcomes, and risk of complications.Level of EvidenceTherapeutic Level III.     

The Biomechanical Effect of Increased Valgus on Total Knee Arthroplasty: A Cadaveric Study

The effects of valgus load on cadaveric knees following total knee arthroplasty (TKA) were investigated using a custom testing system. TKAs were performed on 8 cadaveric knees and tested at 0°, 30°, and 60° knee flexion in both neutral and 5° valgus. Fuji pressure sensitive film was used to quantify contact areas and pressures and MCL strain was determined using a Microscribe digitizing system. Lateral tibiofemoral pressures increased (P < 0.05) at all knee flexion angles with valgus loading. Patellofemoral contact characteristics did not change significantly (P > 0.05). Significant increases in strain were observed along the anterior and posterior border of the MCL at all knee flexion angles. These findings suggest that valgus loading increases TKA joint contact pressures and MCL strain with increasing knee flexion which may increase implant instability.     

Evaluation of Total Knee Arthroplasty Performed With and Without Computer Navigation: A Bilateral Total Knee Arthroplasty Study

Sequential bilateral total knee arthroplasty performed on 54 patients utilizing navigation (CAS-TKA) in one knee and traditional instrumentation (T-TKA) in the contralateral knee was reviewed at a mean follow-up duration of 2.5 years. There were no differences with regard to KSS, ROM, postoperative anatomic alignment, mechanical axis, or tibial angle. There was a statistically significant decrease in outliers for the CAS-TKA group with respect to anatomic alignment (3.7% vs. 17.0%, P = 0.024), mechanical axis (6.1 vs. 20.4%, P = 0.037) and tibial component alignment (0% vs. 7.5%, P = 0.042). There is no apparent benefit of CAS-TKA with regards to KSS, ROM, or alignment in the hands of fellowship-trained total joint specialists. The clinical relevance of reduced outliers in the CAS-TKA group is unknown with the current follow-up interval.     

Manipulation Under Anesthesia is Safe After Cementless Total Knee Arthroplasty: A Multicenter Study

BackgroundCementless total knee arthroplasty (TKA) is thought to facilitate durable, biological fixation between the bone and implant. However, the 4-12 weeks required for osseointegration coincides with the optimal timeframe to perform a manipulation under anesthesia (MUA) if a patient develops postoperative stiffness. This study aims to determine the impact of early MUA on cementless fixation by comparing functional outcomes and survivorship of cementless and cemented TKAs.MethodsA consecutive series of patients who underwent MUA for postoperative stiffness within 90 days of primary, unilateral TKA at 2 academic institutions between 2014 and 2018 were identified. Cases involving extensive hardware removal were excluded. Cementless TKAs undergoing MUA (n = 100) were propensity matched 1:1 to cemented TKAs undergoing MUA (n = 100) using age, gender, body mass index, and year of surgery. Both groups had comparable baseline Knee Injury and Osteoarthritis Outcome Scores (KOOS), Short Form (SF)-12 Physical, and SF-12 Mental scores. MUA-related complications as well as postoperative KOOS and SF-12 scores were compared.ResultsMUA-related complications were equivalently low in both groups (P = .324), with only 1 patella component dissociation in the cementless group. No tibial or femoral components acutely loosened in the perioperative period. Postoperative KOOS (P = .101) and SF-12 Mental scores (P = .380) were similar between groups. Six-year survivorship free from any revision after MUA was 98.0% in both groups (P = 1.000).ConclusionEarly postoperative MUA after cementless TKA was not associated with increased MUA-related complications or worse patient-reported outcomes compared to cemented TKA. Short-term survivorship was also comparable, suggesting high durability of the bone-implant interface.     

Impact of Tibial Tubercle Osteotomy on Final Outcome in Revision Total Knee Arthroplasty: Our Experience and Technique in Pakistan

BackgroudDue to extensive fibrosis during revision surgery, adequate exposure is essential and it can be achieved with several extensile approach options, such as tibial tubercle osteotomy. Information regarding surgical exposure during revision arthroplasty is limited in developing countries, such as Pakistan, due to the lack of adequate data collection and follow-up. Therefore, the purpose of this study was to evaluate the impact of tibial tubercle osteotomy on final outcome of revision total knee arthroplasty (TKA).MethodsA total of 231 revision TKAs were performed between January 2008 and December 2017. Twenty-nine patients underwent tibial tubercle osteotomy for adequate exposure during revision surgery. Of these, 27 patients with complete follow-up were included in our study. Factors examined include age at the time of revision surgery, gender, comorbidities, arthroplasty site (right or left), body mass index (BMI), and primary indications for the tibial tubercle osteotomy during revision TKA. Functional outcome was measured by using Knee Society score (KSS) at 3 months and the final follow-up. All statistical analysis was done using SPSS version 20.0 with a p-value < 0.05 considered significant.ResultsOut of 27 patients, 6 patients (22.2%) were men and 21 patients (77.7%) were women. Right knee revision arthroplasty was performed in 15 patients (55.5%), left knee revision arthroplasty was performed in 12 patients (44.4%), and bilateral revision surgery was performed in only 1 patient (3.7%). The mean BMI was 29.2 kg/m². We used a constrained condylar knee in 20 patients (74%), a rotating hinge knee in 5 patients (18.5%), and mobile bearing tray plus metaphyseal sleeves in 2 patients (7.4%). The KSS was 52.21 ± 4.05 preoperatively, and 79.42 ± 2.2 and 80.12 ± 1.33 at 3 months and 12 months, respectively. Radiological union was achieved in all patients at 3 months. Of 27 patients, only 1 patient (3.7%) had proximal migration of the osteotomy site at 6 months: the patient was asymptomatic and union was also achieved and, therefore, no surgical intervention was performed.ConclusionsTibial tubercle osteotomy during revision TKA can be a safe and reliable technique with superior outcomes and minimal complication rates.     

The Effect of Total Knee Arthroplasty on Knee Joint Kinematics and Kinetics During Gait

This study determined how total knee arthroplasty (TKA) altered knee motion and loading during gait. Three-dimensional kinematic and kinetic gait patterns of 42 patients with severe knee osteoarthritis were collected 1 week prior and 1-year post-TKA. Principal component analysis extracted major patterns of variability in the gait waveforms. Overall and midstance knee adduction moment magnitude decreased. Overall knee flexion angle magnitude increased due to an increase during swing. Increases in the early stance knee flexion moment and late stance knee extension moment were found, indicating improved impact attenuation and function. A decrease in the early stance knee external rotation moment indicated alteration in the typical rotation mechanism. Most changes moved toward an asymptomatic pattern and would be considered improvements in motion, function, and loading.     

Influence of Increased Posterior Tibial Slope in Total Knee Arthroplasty on Knee Joint Biomechanics: A Computational Simulation Study

Background

The reconstructed posterior tibial slope (PTS) plays a significant role in restoring knee kinematics in cruciate-retaining-total knee arthroplasty (TKA). A few studies have reported the effect of the PTS on biomechanics.

A Rare Mode of Extensor Mechanism Failure in Total Knee Arthroplasty

We reported a rare mode of extensor mechanism failure in total knee arthroplasty. The patellar tendon was elongated and thin instead of disruption at the bone-tendon junction. We also described the surgical technique for reconstruction of patellar tendon. Patellar tendon was shortened by a precalculated amount. It was then augmented by autologous semitendinosus tendon graft and protected by tension band wire. Active full knee extension could be achieved at postoperative 10 months after the removal of wire loop.     

Primary Total Knee Arthroplasty in Infection Sequelae About the Native Knee

The aim of this study is to assess the results of primary total knee arthroplasty (TKA) after bone or joint sepsis about the native knee and to analyze the risk factors of periprosthetic infection. Sixty-two patients (62 knees), considered to have prior sepsis history to be resolved, underwent primary TKA and were followed during a mean of 6.1 years (range, 2–10.4 years). Of the 62 patients, periprosthetic infection occurred in 6 after primary TKA (9.7%). Five of 6 patients grew the same organism as prior infection. The number of prior surgeries undertaken for deep infection was found to be an independent risk factor of periprosthetic infection.