Elevated plasma levels of TIMP-1 in patients with rotator cuff tear

Background and purpose

Extracellular matrix remodeling is altered in rotator cuff tears, partly due to altered expression of matrix metalloproteinases (MMPs) and their inhibitors. It is unclear whether this altered expression can be traced as changes in plasma protein levels. We measured the plasma levels of MMPs and their tissue inhibitors (TIMPs) in patients with rotator cuff tears and related changes in the pattern of MMP and TIMP levels to the extent of the rotator cuff tear.

Methods

Blood samples were collected from 17 patients, median age 61 (39–77) years, with sonographically verified rotator cuff tears (partial- or full-thickness). These were compared with 16 age- and sex-matched control individuals with sonographically intact rotator cuffs. Plasma levels of MMPs and TIMPs were measured simultaneously using Luminex technology and ELISA.

Results

The plasma levels of TIMP-1 were elevated in patients with rotator cuff tears, especially in those with full-thickness tears. The levels of TIMP-1, TIMP-3, and MMP-9 were higher in patients with full-thickness tears than in those with partial-thickness tears, but only the TIMP-1 levels were significantly different from those in the controls.

Interpretation

The observed elevation of TIMP-1 in plasma might reflect local pathological processes in or around the rotator cuff, or a genetic predisposition in these patients. That the levels of TIMP-1 and of certain MMPs were found to differ significantly between partial and full-thickness tears may reflect the extent of the lesion or different etiology and pathomechanisms.The subacromial pain syndrome includes a range of disorders from reversible inflammation to massive rotator cuff tearing (Shindle et al. 2011). The etiology appears to be multifactorial, and several anatomic structures may be involved. Repetitive damage of the supraspinatus tendon by mechanical wear from the coraco-acromial ligament and the anterior acromion was described by Neer 1972, and for a long time it was considered the major cause of cuff tearing (Neer 1983). Others have reported age-related tendon degeneration, associated with alterations in extracellular matrix remodeling as a contributing factor (Lo et al. 2004, Millar et al. 2009, Pasternak and Aspenberg 2009, Shindle et al. 2011). Histopathological changes associated with rotator cuff tendinosis have been documented, but it is unclear whether they are a result of a subacromial impingement or an endogenous process, and whether tendinosis might predispose to tendon tears (Lo et al. 2004).Regardless of whether mechanical or degenerative factors initiates tearing, there are alterations in the cellular and extracellular matrix (Gwilym et al. 2009). It has been suggested that genetic factors may influence apoptosis or regeneration (Gwilym et al. 2009, Shindle et al. 2011). Still, the molecular changes associated with rotator cuff tearing are largely unknown (Lo et al. 2004, Garofalo et al. 2011). Turnover of the extracellular matrix (ECM) is mediated by matrix metalloproteinases (MMPs), a family of at least 24 zinc-dependent endopeptidases. The MMPs are classified according to their main degradative activity, into for example collagenases, gelatinases, and stromelysins (Pasternak and Aspenberg 2009). Their activity is regulated by endogenous inhibitors: tissue inhibitors of metalloproteinases (TIMPs). There are 4 known TIMPs, which reversibly inhibit all MMPs by 1:1 interaction with the zinc-binding site (Lo et al. 2004, Pasternak and Aspenberg 2009). MMP production is induced by factors such as cytokines and tumor necrosis factor-α. MMPs are secreted by connective tissue and inflammatory cells and then activated in the extracellular space (Garofalo et al. 2011). The composition of the ECM is dependent on the balance between MMPs and TIMPs (Lo et al. 2004, Pasternak and Aspenberg 2009, Garofalo et al. 2011). Levels of MMP mRNA and TIMP mRNA were found to be altered in biopsies from torn rotator cuff tendon (Lo et al. 2004). It is not known, however, whether these changes are causative or whether they are secondary to tendon tearing.Studies on MMP and TIMP levels in patients with rotator cuff syndrome and cuff tears have used samples collected at surgery from the subacromial bursa, synovial fluid, or the tendons (Lo et al. 2004, Lakemeier et al. 2010, Shindle et al. 2011). To date, there have been no data on systemic levels. Alterations in MMP and TIMP levels in systemic blood samples have been identified in other musculoskeletal diseases such as Dupuytren’s disease, ankylosing spondylitis, and fracture non-union, suggesting that alterations associated with rotator cuff disease may also be measurable systemically (Ulrich et al. 2003, Henle et al. 2005, Pasternak and Aspenberg 2009). In osteoarthritis, circulating MMP-3 has been suggested to be a marker of disease severity and has been used as a prognostic tool (Lohmander et al. 2005).We measured plasma levels of MMPs and TIMPs in patients with rotator cuff tears and compared partial- and full-thickness tears, in order to find disease-associated changes in the expression patterns of MMP and TIMP.     

Locking plate osteosynthesis in displaced 4-part fractures of the proximal humerus

Background and purpose

There is considerable uncertainty about the optimal treatment of displaced 4-part fractures of the proximal humerus. Within the last decade, locking plate technology has been considered a breakthrough in the treatment of these complex injuries.

Methods

We systematically identified and reviewed clinical studies on the benefits and harms after osteosynthesis with locking plates in displaced 4-part fractures.

Results

We included 14 studies with 374 four-part fractures. There were 10 case series, 3 retrospective observational comparative studies, 1 prospective observational comparative study, and no randomized trials. Small studies with a high risk of bias precluded reliable estimates of functional outcome. High rates of complications (16–64%) and reoperations (11–27%) were reported.

Interpretation

The empirical foundation for the value of locking plates in displaced 4-part fractures of the proximal humerus is weak. We emphasize the need for well-conducted randomized trials and observational studies.There is considerable uncertainty about the optimal treatment of displaced 4-part fractures of the proximal humerus (Misra et al. 2001, Handoll et al. 2003, Bhandari et al. 2004, Lanting et al. 2008). Only 2 small inconclusive randomized trials have been published (Stableforth 1984, Hoellen et al. 1997). A large number of interventions are used routinely, ranging from a non-operative approach to open reduction and internal fixation (ORIF), and primary hemiarthroplasty (HA).In the last decade, locking plate technology has been developed and has been heralded as a breakthrough in the treatment of fractures in osteoporotic bone (Gautier and Sommer 2003, Sommer et al. 2003, Haidukewych 2004, Miranda 2007). Locking plate technique is based on the elimination of friction between the plate and cortex, and relies on stability between the subchondral bone and screws. Multiple multidirectional convergent and divergent locking screws enhance the angular stability of the osteosynthesis, possibly resulting in better postoperative function with reduced pain. Reported complications include screw cut-out, varus fracture collapse, tuberosity re-displacement, humeral head necrosis, plate impingement, and plate or screw breakage (Hall et al. 2006, Tolat et al. 2006, van Rooyen et al. 2006, Agudelo et al. 2007, Gardner et al. 2007, Khunda et al. 2007, Ring 2007, Smith et al. 2007, Voigt et al. 2007, Egol et al. 2008, Kirchhoff et al. 2008, Owsley and Gorczyca 2008, Brunner et al. 2009, Micic et al. 2009, Sudkamp et al. 2009). The balance between the benefit and harms of the intervention seems delicate.Several authors of narrative reviews and clinical series have strongly recommended fixation of displaced 4-part fractures of the humerus with locking plates (Bjorkenheim et al. 2004, Hente et al. 2004, Hessler et al. 2006, Koukakis et al. 2006, Kilic et al. 2008, Korkmaz et al. 2008, Shahid et al. 2008, Papadopoulos et al. 2009, Ricchetti et al. 2009) and producers of implants unsurprisingly strongly advocate them (aap Implantate 2010, Stryker 2010, Synthes 2010, Zimmer 2010). Despite the increasing use of locking plates (Illert et al. 2008, Ricchetti et al. 2009), we have been unable to identify systematic reviews on the benefits and harms of this new technology in displaced 4-part fractures. Thus, we systematically identified and reviewed clinical studies on the benefits and harms after osteosynthesis with locking plates in displaced 4-part fractures of the proximal humerus.     

PCR-hybridization after sonication improves diagnosis of implant-related infection

Purpose

We wanted to improve the diagnosis of implant-related infection using molecular biological techniques after sonication.

Methods

We studied 258 retrieved implant components (185 prosthetic implants and 73 osteosynthesis implants) from 126 patients. 47 patients had a clinical diagnosis of infection (108 components) and 79 patients did not (150 components). The fluids from sonication of retrieved implants were tested in culture and were also analyzed using a modified commercial PCR kit for detection of Gram-positive and Gram-negative bacteria (GenoType BC; Hain Lifescience) after extraction of the DNA.

Results

38 of 47 patients with a clinical diagnosis of infection were also diagnosed as being infected using culture and/or PCR (35 by culture alone). Also, 24 patients of the 79 cases with no clinical diagnosis of infection were identified microbiologically as being infected (4 by culture, 16 by PCR, and 4 by both culture and PCR). Comparing culture and PCR, positive culture results were obtained in 28 of the 79 patients and positive PCR results were obtained in 35. There were 21 discordant results in patients who were originally clinically diagnosed as being infected and 28 discordant results in patients who had no clinical diagnosis of infection.

Interpretation

For prosthetic joint infections and relative to culture, molecular detection can increase (by one tenth) the number of patients diagnosed as having an infection. Positive results from patients who have no clinical diagnosis of infection must be interpreted carefully.Management of orthopedic implant-related infections starts with a proper etiological diagnosis, which is required for specific antibiotic treatment. Different approaches are used to obtain such a diagnosis (Trampuz et al. 2006, Del Pozo and Patel 2009) and these must take into account the importance of the development of bacterial biofilms in the pathogenesis and management of implant-related infections (Trampuz et al. 2003, 2006, Costerton 2005).The use of low-intensity ultrasound that releases biofilms is an alternative to classical culture methods from implants, and several protocols have been developed for this purpose (Trampuz et al. 2007, Dora et al. 2008, Esteban et al. 2008, Piper et al. 2009, Achermann et al. 2010). In these reports, the use of sonication of retrieved implants was reported to have similar sensitivity to or higher sensitivity than conventional techniques. Nevertheless, there are still patients with a clinical diagnosis of infection and negative cultures (Berbari et al. 2007). Previous use of antibiotics has been implicated as one of the main causes of this problem (Trampuz et al. 2007), but other causes are also possible. To solve the problem, molecular biological techniques have been proposed in order to obtain faster and more accurate results than conventional culture (Tunney et al. 1999, Sauer et al. 2005, Dempsey et al. 2007, Fihman et al. 2007, Moojen et al. 2007, Gallo et al. 2008, Kobayashi et al. 2008, Vandercam et al. 2008, De Man et al. 2009, Piper et al. 2009, Achermann et al. 2010, Riggio et al. 2010, Marin et al. 2012). Most of these reports were based on protocols that were developed in-house, which are difficult to integrate into clinical microbiology routines, even though they may give good results. Recently, however, commercial kits have been designed to work under common routine laboratory conditions. Here, we describe a study on the diagnosis of infection in a broad range of orthopedic implant-related infections, comparing conventional culture with detection of microbial DNA using a commercial kit—in both cases after sonication of retrieved implants.     

Why still in hospital after fast-track hip and knee arthroplasty?

Background and purpose

Length of stay (LOS) following total hip and knee arthroplasty (THA and TKA) has been reduced to about 3 days in fast-track setups with functional discharge criteria. Earlier studies have identified patient characteristics predicting LOS, but little is known about specific reasons for being hospitalized following fast-track THA and TKA.

Patients and methods

To determine clinical and logistical factors that keep patients in hospital for the first postoperative 24–72 hours, we performed a cohort study of consecutive, unselected patients undergoing unilateral primary THA (n = 98) or TKA (n = 109). Median length of stay was 2 days. Patients were operated with spinal anesthesia and received multimodal analgesia with paracetamol, a COX-2 inhibitor, and gabapentin—with opioid only on request. Fulfillment of functional discharge criteria was assessed twice daily and specified reasons for not allowing discharge were registered.

Results

Pain, dizziness, and general weakness were the main clinical reasons for being hospitalized at 24 and 48 hours postoperatively while nausea, vomiting, confusion, and sedation delayed discharge to a minimal extent. Waiting for blood transfusion (when needed), for start of physiotherapy, and for postoperative radiographic examination delayed discharge in one fifth of the patients.

Interpretation

Future efforts to enhance recovery and reduce length of stay after THA and TKA should focus on analgesia, prevention of orthostatism, and rapid recovery of muscle function.Total hip and total knee arthroplasty (THA and TKA) are frequent operations with an average length of stay (LOS) of about 6–12 days in the United Kingdom, Germany, and Denmark (Husted et al. 2006, Bundesauswertung 2009, NHS 2010).During the last decade, however, there has been increased interest in optimal multimodal perioperative care to enhance recovery (the fast-track methodology). Improvement of analgesia; reduction of surgical stress responses and organ dysfunctions including nausea, vomiting, and ileus; early mobilization; and oral nutrition have been of particular interest (Kehlet 2008, Kehlet and Wilmore 2008). These principles have also been applied to THA and TKA, resulting in improvements in pain treatment with multimodal opioid-sparing regimens including a local anesthetic infiltration technique (LIA) or peripheral nerve blocks to facilitate early mobilization (Ilfeld et al. 2006a, b, 2010a, Andersen et al. 2008, Kerr and Kohan 2008), and allowing functional rehabilitation to be initiated a few hours postoperatively (Holm et al. 2010)—ultimately leading to a reduction in LOS (Husted et al. 2008, Barbieri et al. 2009, Husted et al. 2010a, b). Using these evidence-based regimens combined with an improved logistical setup, LOS is reduced to about 2–4 days (Kerr and Kohan 2008, Husted et al. 2010 a,b,c, Lunn et al. 2011).Having well-defined functional discharge criteria is imperative in order to ensure a safe discharge—and it is mandatory if meaningful comparison of LOS is done following alterations in the track (Husted et al. 2008). In the same fast-track setting, an earlier study focused on patient characteristics predicting LOS (Husted et al. 2008). However, little is known about the specific reasons for why patients are hospitalized during the first 1–3 days after THA or TKA; i.e. why can patients not be discharged?We therefore analyzed clinical and organizational factors responsible for being hospitalized in a well-defined prospective setup in a fast-track unit. This unit had previously documented LOS of about 2–3 days (Andersen et al. 2008, Holm et al. 2010, Husted et al. 2010b, c, Lunn et al. 2011).     

Intraarticular location predicts cartilage filling and subchondral bone changes in a chondral defect

Background and purpose

The natural history of, and predictive factors for outcome of cartilage restoration in chondral defects are poorly understood. We investigated the natural history of cartilage filling subchondral bone changes, comparing defects at two locations in the rabbit knee.

Animals and methods

In New Zealand rabbits aged 22 weeks, a 4-mm pure chondral defect (ICRS grade 3b) was created in the patella of one knee and in the medial femoral condyle of the other. A stereo microscope was used to optimize the preparation of the defects. The animals were killed 12, 24, and 36 weeks after surgery. Defect filling and the density of subchondral mineralized tissue was estimated using Analysis Pro software on micrographed histological sections.

Results

The mean filling of the patellar defects was more than twice that of the medial femoral condylar defects at 24 and 36 weeks of follow-up. There was a statistically significant increase in filling from 24 to 36 weeks after surgery at both locations.The density of subchondral mineralized tissue beneath the defects subsided with time in the patellas, in contrast to the density in the medial femoral condyles, which remained unchanged.

Interpretation

The intraarticular location is a predictive factor for spontaneous filling and subchondral bone changes of chondral defects corresponding to ICRS grade 3b. Disregarding location, the spontaneous filling increased with long-term follow-up. This should be considered when evaluating aspects of cartilage restoration.Focal articular cartilage injuries of the knee are common (Hjelle et al. 2002, Aroen et al. 2004) and they can impair patients'' quality of life as much as severe osteoarthritis (Heir et al. 2010). The literature concerning the natural history of focal cartilage defects in patients, and the intrinsic factors affecting it, is limited (Linden 1977, Messner and Gillquist 1996, Drogset and Grontvedt 2002, Shelbourne et al. 2003, Loken et al. 2010). In experimental studies evaluating cartilage restoration in general, the importance of intrinsic factors such as the depth and size of the lesion and the time from when the lesion was made to evaluation have been emphasized (Shapiro et al. 1993, Hunziker 1999, Lietman et al. 2002). Which part of the joint is affected and whether or not the defect is weight-bearing are also of interest (Hurtig 1988, Frisbie et al. 1999). Most of these studies have, however, concerned defects penetrating the subchondral mineralized tissues corresponding to ICRS grade 4 (Brittberg and Winalski 2003). Access to bone marrow elements in these defects might be one of the strongest predictive factors for filling of the defect, making the importance of other factors difficult to evaluate (Hunziker 1999).In experimental studies on pure chondral defects that do not penetrate the subchondral mineralized tissues, corresponding to ICRS grade 3b (Brittberg and Winalski 2003), the type of animal studied, the size of the lesion, and the location of the defects vary, and there is limited data on the influence of these parameters on outcome (Breinan et al. 2000). The information on spontaneous filling comes mainly from observations of untreated defects serving as controls (Grande et al. 1989, Brittberg et al. 1996, Breinan et al. 1997, 2000, Frisbie et al. 1999, 2003, Dorotka et al. 2005) and the information on subchondral bone changes is even more limited (Breinan et al. 1997, Frisbie et al. 1999). Although most human focal cartilage lesions are located on the medial femur condyle (Aroen et al. 2004), there have been few experimental studies involving untreated ICRS grade 3b defects on the medial femur condyle (Dorotka et al. 2005). According to a PubMed search, the rabbit knee is the most widely used experimental animal model for cartilage restoration (Årøen 2005). The locations of ICRS grade 3 chondral defects in the rabbit knee evaluated for spontaneous changes have included the patella (Grande et al. 1989, Brittberg et al. 1996) and, in one study, defects at the distal surface of the femur (Mitchell and Shepard 1976). The latter report did not, however, include quantitative data.To our knowledge, the influence of the intraarticular location on the outcome of cartilage restoration and subchondral bone changes has not been thoroughly studied. Thus, the main purpose of our study was to test the hypothesis that the intraarticular location influences the spontaneous filling of a chondral defect that does not penetrate the subchondral bone. Secondly, we wanted to evaluate whether the intraarticular location would influence changes in the subchondral bone and degenerative changes as evaluated from macroscopic appearance and proteoglycan content of synovial fluid (Messner et al. 1993a).     

Survival and prognostic factors in chondrosarcoma: results in 115 patients with long-term follow-up

Background and purpose

There have been few long-term studies on the outcome of chondrosarcoma and the findings regarding prognostic factors are controversial. We examined a homogeneous group of patients with primary central chondrosarcoma of bone who were treated according to a uniform surgical protocol at our institution, in order to determine the factors that influence survival and identify potential improvements to our therapeutic algorithm.

Patients and methods

We performed a retrospective analysis of 115 patients with primary central chondrosarcoma of bone who presented with localized disease and who had a minimum follow-up of 5 years after diagnosis. 68 tumors were localized in the extremities and 47 in the axial skeleton or pelvis. 59 patients had a high-grade (II and III) and 56 a low-grade (I) tumor. 94 patients underwent surgical resection with adequate (wide or radical) margins, while 21 patients had inadequate (marginal or intralesional) margins.

Results

Tumor grade and localization were found to be statistically significant independent predictors of disease-related deaths in multivariate analysis. The quality of surgical margins did not influence survival. The AJCC staging system was able to predict prognosis in patients with chondrosarcoma of the extremities, but not in those with tumors of the axial skeleton and pelvis. Long-term survival after secondary metastatic disease was only observed when metastases were resected with wide margins. Patients with metastases who received further treatment with conventional chemotherapy, radiotherapy, and/or further surgery had significantly better survival compared to those who received best supportive care.

Interpretation

The outcome in patients with primary central chondrosarcoma of bone who present with localized disease is mostly affected by tumor-related parameters.Chondrosarcoma is the second most common primary malignant solid tumor of bone, and accounts for approximately 25% of all bone sarcomas (Bertoni et al. 2002). It is largely considered to be resistant to conventional chemotherapy and radiotherapy (Healey and Lane 1986, Campanacci 1999, Gelderbloom et al. 2008). As such, surgical resection has been the cornerstone of treatment for over 50 years (Dahlin and Henderson 1956, Healey and Lane 1986, Gelderbloom et al. 2008). However, in recent years several novel therapeutic approaches have been evaluated in experimental studies (Morioka et al. 2003, Gouin et al. 2006, Klenke et al. 2007, Delaney et al. 2009, Schrage et al. 2009, 2010).There is no consensus on prognostic factors to determine which patients have a higher risk of treatment failure and disease-related deaths, although several papers have addressed this issue (Evans et al. 1977, Pritchard et al. 1980, Gitelis et al. 1981, Björnsson et al. 1998, Lee et al. 1999, Rizzo et al. 2001, Fiorenza et al. 2002). One reason may be that most studies have included patients treated over several decades, with no account for the different surgical criteria, indications, and methods applied over the years. Furthermore, most studies have included patients with short follow-up, despite the fact that a high rate of late recurrence and metastasis has been reported for chondrosarcoma patients compared to those with other primary bone sarcomas (Evans et al. 1977, Pritchard et al. 1980), as well as patients with rare histopathological subtypes that have a distinct biologic behavior (Lee et al. 1999, Bertoni et al. 2002, Gelderbloom et al. 2008) such as dedifferentiated chondrosarcoma, mesenchymal chondrosarcoma, and clear cell chondrosarcoma, thus reducing the validity of the results.The purpose of this long-term retrospective study was to examine a group of patients with primary central chondrosarcoma of bone who presented with localized disease and were treated with a uniform surgical protocol at our institution, in order to determine the factors that influence overall and event-free survival. We further aimed at identifying potential improvements to our therapeutic algorithm.     

Perioperative mortality after hemiarthroplasty related to fixation method

Background and purpose

The appropriate fixation method for hemiarthroplasty of the hip as it relates to implant survivorship and patient mortality is a matter of ongoing debate. We examined the influence of fixation method on revision rate and mortality.

Methods

We analyzed approximately 25,000 hemiarthroplasty cases from the AOA National Joint Replacement Registry. Deaths at 1 day, 1 week, 1 month, and 1 year were compared for all patients and among subgroups based on implant type.

Results

Patients treated with cemented monoblock hemiarthroplasty had a 1.7-times higher day-1 mortality compared to uncemented monoblock components (p < 0.001). This finding was reversed by 1 week, 1 month, and 1 year after surgery (p < 0.001). Modular hemiarthroplasties did not reveal a difference in mortality between fixation methods at any time point.

Interpretation

This study shows lower (or similar) overall mortality with cemented hemiarthroplasty of the hip.The frequency of hip fractures is increasing with our ageing population, with an annual incidence of between 1.4 and 5 per 103 per year (Lonnroos et al. 2006, Icks et al. 2008, Varez-Nebreda et al. 2008). Health model projections have estimated that 6.3 million hip fractures will occur annually worldwide within the next 40 years (Cooper et al. 1992), imposing a significant economic health burden. There is a large reported perioperative mortality rate in this population, ranging from 2.4% to 8.2% at 1 month (Parvizi et al. 2001, Radcliff et al. 2008) and over 25% at 1 year (Elliott et al. 2003, Jiang et al. 2005). Furthermore, it was recently reported that the current mortality rate is higher now than 25 years ago (Vestergaard et al. 2007a). Today, it is generally accepted that displaced intracapsular fractures are best treated with arthroplasty rather than internal fixation (Keating et al. 2006, Leighton et al. 2007). In the at-risk population, however, multiple comorbidities are common and the best form of component fixation is in question.Bone cement implantation syndrome is a well-described complication of cemented hip arthroplasty. It is characterized by a systemic drop in systolic blood pressure, hypoxemia, pulmonary hypertension, cardiac dysrhythmias, and occasionally cardiac arrest and death (Rinecker 1980, Orsini et al. 1987, Parvizi et al. 1999). The prevailing theory to explain the pathophysiology of this phenomenon is embolism of fat, marrow contents, bone, and to some degree methylmethacrylate to the lung (Rinecker 1980, Elmaraghy et al. 1998, Parvizi et al. 1999, Koessler et al. 2001). An increased degree of pulmonary insult with fat microemboli has been demonstrated (mostly in randomized controlled trials) during insertion of a cemented femoral stem rather than an uncemented implant (Orsini et al. 1987, Ries et al. 1993, Christie et al. 1994, Pitto et al. 1999), presumably due to increased intramedullary femoral canal pressures in the cemented group (Kallos et al. 1974, Orsini et al. 1987). These pressures can be reduced by the use of distal venting holes in the femur during stem insertion (Engesæter et al. 1984). It has been shown previously by single-institutional review that patients undergoing cemented hip arthroplasty have a higher intraoperative mortality rate relative to uncemented arthroplasty, presumably due to a reduced incidence of fat embolism in the latter group (Parvizi et al. 1999). The increased mortality risk was also present at 30 days in the treatment of acute fractures with cemented arthroplasty, also from a single-institutional review (Parvizi et al. 2004). Although cement-related mortality is rare (Dearborn and Harris 1998, Parvizi et al. 1999, 2001, 2004, Weinrauch et al. 2006), it is a devastating complication—often reported through observational studies or literature reviews. Proponents of uncemented hip arthroplasty often cite this concern to support their reluctance to use cemented hip arthroplasty in both elective procedures and fracture management. However, many different types of studies have been unable to identify any increased mortality risk with the use of cement (Lausten and Vedel 1982 (observational), Emery et al. 1991 (RCT), Lo et al. 1994 (observational), Khan et al. 2002a,b (literature review), Parker and Gurusamy 2004 (literature review)) and others have shown a decrease in mortality at 30 days when cement is used (Foster et al. 2005).Cemented hip hemiarthroplasty appears to offer improved rate of return to baseline function, reduced postoperative pain, and superior long-term survivorship relative to uncemented arthroplasty (Khan et al. 2002a, b, Parker and Gurusamy 2004). We reasoned that failure to return to baseline function after hemiarthroplasty may be another risk factor for perioperative mortality (Hannan et al. 2001, Braithwaite et al. 2003). Lower revision rates for cemented prostheses and increased mortality at revision surgery contribute further to reducing the overall mortality risk. We evaluated the relationship between the method of fixation of hip arthroplasty and perioperative mortality using a large national joint replacement registry.     

No clinical benefit of gender-specific total knee arthroplasty: A systematic review and meta-analysis of 6 randomized controlled trials

Background and purpose

There is no consensus regarding the clinical relevance of gender-specific prostheses in total knee arthroplasty (TKA). We summarize the current best evidence in a comparison of clinical and radiographic outcomes between gender-specific prostheses and standard unisex prostheses in female patients.

Methods

We used the PubMed, Embase, Cochrane, Science Citation Index, and Scopus databases. We included randomized controlled trials published up to January 2013 that compared gender-specific prostheses with standard unisex prostheses in female patients who underwent primary TKAs.

Results

6 trials involving 423 patients with 846 knee joints met the inclusion criteria. No statistically significant differences were observed between the 2 designs regarding pain, range of motion (ROM), knee scores, satisfaction, preference, complications, and radiographic results. The gender-specific design (Gender Solutions; Zimmer Inc, Warsaw, Indiana) reduced the prevalence of overhang. However, it had less overall coverage of the femoral condyles compared to the unisex group. In fact, the femoral prosthesis in the standard unisex group matched better than that in the gender-specific group.

Interpretation

Gender-specific prostheses do not appear to confer any benefit in terms of clinician- and patient-reported outcomes for the female knee.Women account for almost two-thirds of knee arthroplasties (Kurtz et al. 2007). Recently, a possible effect of gender on functional outcomes and implant survivorship has been identified (Vincent et al. 2006, Ritter et al. 2008, Kamath et al. 2010, Parsley et al. 2010, O’Connor 2011). Gender differences in the anatomy of the distal femur are well documented (Conley et al. 2007, Yue et al. 2011a, b, Yan et al. 2012, Zeng et al. 2012). Women tend to have a less prominent anterior condyle (Conley et al. 2007, Fehring et al. 2009), a higher quadriceps angle (Q-angle) (Hsu et al. 1990, Woodland et al. 1992), and a reduced mediolateral to anteroposterior aspect ratio (Chin et al. 2002, Chaichankul et al. 2011). Investigators have found that standard unisex knee prostheses may not equally match the native anatomy in male and female knees (Clarke and Hentz 2008, Yan et al. 2012). A positive association between the femoral component size and the amount of overhang was observed in females, and femoral component overhang (≥ 3 mm) may result in postoperative knee pain or reduced ROM (Hitt et al. 2003, Lo et al. 2003, Mahoney et al. 2010).The concept of gender-specific knee prostheses was introduced to match these 3 anatomic differences in the female population (Conley et al. 2007). It includes a narrower mediolateral diameter for a given anteroposterior dimension, to match the female knee more closely. Additionally, the anterior flange of the prothesis was modified to include a recessed patellar sulcus and reduced anterior condylar height (to ovoid “overstuffing” during knee flexion) and a lateralized patellar sulcus (to accommodate the increased Q-angle associated with a wider pelvis).Several randomized controlled trials (RCTs) have failed to establish the superiority of the gender-specific prosthesis over the unisex knee prosthesis in the female knee (Kim et al. 2010a, b, Song et al. 2012a, Thomsen et al. 2012, von Roth et al. 2013). In contrast, other studies have found higher patient satisfaction and better radiographic fit in the gender-specific TKAs than in the standard unisex TKAs (Clarke and Hentz 2008, Parratte et al. 2011, Yue et al. 2014). We therefore performed a systematic review and meta-analysis to compare the clinical and radiographic results of TKA in female patients receiving gender-specific prostheses or standard unisex prostheses.     

Comparison of flanged and unflanged acetabular cup design: An experimental study using ceramic and cadaveric acetabuli

Background and purpose

Adequate depth of cement penetration and cement mantle thickness is important for the durability of cemented cups. A flanged cup, as opposed to unflanged, has been suggested to give a more uniform cement mantle and superior cement pressurization, thus improving the depth of cement penetration. This hypothesis was tested experimentally.

Materials and methods

The same cup design with and without flange (both without cement spacers) was investigated regarding intraacetabular pressure, cement mantle thickness, and depth of cement penetration. With machine control, the cups were inserted into open-pore ceramic acetabular models (10 flanged, 10 unflanged) and into paired cadaver acetabuli (10 flanged, 10 unflanged) with prior pressurization of the cement.

Results

No differences in intraacetabular pressures during cup insertion were found, but unflanged cups tended to migrate more towards the acetabular pole. Flanged cups resulted in thicker cement mantles because of less bottoming out, whereas no differences in cement penetration into the bone were observed.

Interpretation

Flanged cups do not generate higher cementation pressure or better cement penetration than unflanged cups. A possible advantage of the flange, however, may be to protect the cup from bottoming out, and there is possibly better closure of the periphery around the cup, sealing off the cement-bone interface.The main cause of aseptic loosening is inadequate surgical techniques and inferior prosthetic implants (Herberts and Malchau 2000). Sufficient cement penetration (3–5 mm) into cancellous bone and prevention of bottoming out of the cup, as seen from a uniform cement mantle that is at least 2 mm thick (i.e. cement penetration excluded), have been said to be crucial for cup fixation (Huiskes and Slooff 1981, Noble and Swarts 1983, Schmalzried et al. 1993, Mjöberg 1994, Ranawat et al. 1997, Lichtinger and Muller 1998). A clean bony surface with partly exposed cancellous bone together with cement pressurization before prosthetic implantation improves the depth of cement penetration, thus creating a stronger cement-bone interface (Krause et al. 1982, Rey, Jr. et al. 1987, Mann et al. 1997, Flivik et al. 2006, Abdulghani et al. 2007).Absence of postoperative demarcation at the acetabular cement-bone interface has been related to a reduced risk of aseptic cup loosening (Ranawat et al. 1995, Garcia-Cimbrelo et al. 1997, Ritter et al. 1999, Flivik et al. 2005). The use of a flanged polyethylene cup has demonstrated both less postoperative demarcation at the above interface (Hodgkinson et al. 1993) and less loosening (Garellick et al. 2000). This may be due to its ability to increase cement pressurization at the time of implantation and thereby the depth of cement penetration, though conflicting experimental findings have been reported (Oh et al. 1985, Shelley and Wroblewski 1988, Parsch et al. 2004, Lankester et al. 2007). The previous studies addressing the use of flanged cups have all had cups inserted without prior pressurization of cement, and only Parsch et al. (2004) implanted the cup into a porous material (cadaveric bone).Accordingly, we decided to compare the intraacetabular pressures, cement mantle thickness, and depth of cement penetration obtained using flanged and unflanged cups inserted in an open-pore ceramic acetabular model as well as in paired cadaveric acetabuli, using pressurization of the cement before implantation.     

Role of preoperative pain,muscle function,and activity level in discharge readiness after fast-track hip and knee arthroplasty

Methods Before surgery, hip pain (THA) or knee pain (TKA), lower-extremity muscle power, functional performance, and physical activity were assessed in a sample of 150 patients and used as independent variables to predict the outcome (dependent variable)—readiness for hospital discharge —for each type of surgery. Discharge readiness was assessed twice daily by blinded assessors.Results Median discharge readiness and actual length of stay until discharge were both 2 days. Univariate linear regression followed by multiple linear regression revealed that age was the only independent predictor of discharge readiness in THA and TKA, but the standardized coefficients were small (≤ 0.03).Interpretation These results support the idea that fast-track THA and TKA with a length of stay of about 2–4 days can be achieved for most patients independently of preoperative functional characteristics.Over the last decade, length of stay (LOS) with discharge to home after primary THA and TKA has declined from about 5–10 days to about 2–4 days in selected series and larger nationwide series (Malviya et al. 2011, Raphael et al. 2011, Husted et al. 2012, Kehlet 2013, Hartog et al. 2013, Jørgensen and Kehlet 2013). However, there is a continuing debate about whether selected patients only or all patients should be scheduled for “fast-track” THA and TKA in relation to psychosocial factors and preoperative pain and functional status (Schneider et al. 2009, Hollowell et al. 2010, Macdonald et al. 2010, Antrobus and Bryson 2011, Jørgensen and Kehlet 2013), or whether organizational or pathophysiological factors in relation to the surgical trauma may determine the length of stay (Husted et al. 2011, Husted 2012).We studied the role of THA and TKA patients’ preoperative pain and functional characteristics in discharge from 2 orthopedic departments with well-established fast-track recovery regimens (Husted et al. 2010).     

Lower 5-year cup re-revision rate for dual mobility cups compared with unipolar cups: report of 15,922 cup revision cases in the Dutch Arthroplasty Register (2007–2016)

Background and purpose

For 20 years, medical treatment of rheumatoid arthritis (RA) has been improving and the incidence of joint surgery has decreased. We investigated the rates of primary ankle joint arthrodesis and total ankle arthroplasty in patients with RA in Finland between 1997 and 2010 to establish whether trends have changed during that period.

Methods

The annual figures for primary ankle joint arthrodeses and total ankle replacements performed in patients with RA were obtained from nationwide population-based registries. Incidences were calculated per population of 10⁵ and they are reported in 2-year periods.

Results

During the study period, 593 primary ankle joint arthrodeses and 318 total ankle arthroplasties were performed in patients with RA. The incidence of ankle joint arthrodesis reached its highest value (2.4/10⁵) in 1997–1998 and it was lowest in 2001–2002 (1.1/10⁵). After 2002, the incidence increased slightly but did not reach the level in 1997–1998, even though total ankle replacements almost ended in Finland during the period 2009–2010. From 1997, total ankle replacements increased until 2003–2004 (incidence 1.5/10⁵) and then gradually decreased. In 2009–2010, the incidence of total ankle replacements was only 0.4/10⁵.

Interpretation

During the observation period 1997–2010, while total ankle replacements generally became more common in patients with RA, the incidence of primary ankle joint arthrodesis decreased and did not increase in the period 2009-2010, even though total ankle replacement surgery almost ended in Finland. No change in the incidence of these operations, when pooled together, was observed from 1997 to 2010.In rheumatoid arthritis (RA), an alternative to ankle joint arthrodesis is total ankle arthroplasty (TAA). TAA preserves joint motion and function, with protection of other joints (Valderrabano et al. 2003, Doets et al. 2007, Piriou et al. 2008). Currently, the main indications for TAA are end-stage idiopathic, inflammatory, and post-traumatic osteoarthritis (Rydholm 2007, Skyttä et al. 2010, Henricson et al. 2011).During the past 2 decades, medical treatment for RA has improved. Studies from different countries have suggested that rates of joint replacement in RA have decreased in recent years (Da Silva et al. 2003, Kobelt et al. 2004, Ward 2004, Pedersen et al. 2005, Weiss et al. 2006, 2008, Sokka et al. 2007, Momohara et al. 2010, Jämsen et al. 2013). However, there have only been a few studies on the incidence of ankle joint arthrodesis and TAA in patients with RA (Fevang et al. 2007, Louie and Ward 2010).Using data from nationwide population-based registries, we determined the rates of primary ankle joint arthrodesis and TAA in patients with RA in Finland, 1997–2010.     

Posttraumatic midshaft clavicular shortening does not result in relevant functional outcome changes: Observations in 32 healed,nonoperatively treated fractures

Background and purpose

Shoulder function may be changed after healing of a nonoperatively treated clavicular fracture, especially in cases of clavicular shortening or mal-union. We investigated scapular orientations and functional outcome in healed clavicular fractures with and without clavicular shortening.

Patients and methods

32 participants with a healed nonoperatively treated midshaft clavicular fracture were investigated. Motions of the thorax, arm, and shoulder were recorded by standardized electromagnetic 3D motion tracking. The DASH score and Constant-Murley score were used to evaluate functional outcome. Orientation of the scapula and humerus at rest and during standardized tasks, and strength and function of the affected shoulders were compared with corresponding values for the uninjured contralateral shoulders.

Results

Mean clavicular shortening was 25 mm (SD 16). Scapula protraction had increased by mean 4.4° in rest position in the affected shoulders. During abduction, slightly more protraction, slightly more lateral rotation, and slightly less backward tilt was found for the affected shoulders. For anteflexion, the scapular orientations of the affected shoulders also showed slightly increased protraction, slightly increased lateral rotation, and slightly reduced backward tilt. Scapulohumeral kinematics, maximum humerus angles, and strength were not associated with the degree of clavicular shortening. All participants had excellent performance on the Constant-Murley score and DASH score.

Interpretation

Scapulohumeral kinematics in shoulders with a healed clavicular fracture differ from those in uninjured shoulders, but these changes are small, do not result in clinically relevant changes in outcome, and do not relate to the amount of clavicular shortening. These findings do not support routine operative reduction and fixation of shortened midshaft clavicular fractures based on the argument of functional outcome.Displaced midshaft clavicular fractures are often treated nonoperatively with good results, despite the frequent presence of initial clavicular shortening (Eskola et al. 1986, Nordqvist and Petersson 1994, Robinson 1998, Hillen et al. 2010). Studies on clinical outcome after clavicular shortening have given conflicting results: some have shown shortening to be associated with poor functional outcome (Eskola et al. 1986, Hill et al. 1997, Lazarides and Zafiropoulos 2006), whereas others have indicated no such relationship (Nordqvist et al. 1997, Oroko et al. 1999, Nowak et al. 2005, Rasmussen et al. 2011). Mal-union of the clavicle leads to an altered position of the scapula relative to the thorax (Ledger et al. 2005, Veeger and van der Helm 2007), which may cause shoulder problems such as acromioclavicular osteoarthritis, reduced arm-shoulder functionality, and symptomatic winging of the scapula (Ledger et al. 2005, Hillen et al. 2012, Ristevski et al. 2013). Primary operative treatment may therefore be preferred in patients with substantial clavicular shortening (Canadian Orthopaedic Trauma Society 2007), or to prevent non-union (McKee et al. 2012). Operative treatment of clavicular midshaft fractures has become more common (Stegeman et al. 2013). However, the influence of shortening on clavicular and scapulohumeral movement and on functional outcome has not been sufficiently studied to substantiate the need for primary operative reduction and fixation of displaced clavicular fractures in order to prevent poor functional outcome.Our main goal was to assess scapular orientation and arm-shoulder kinematics in patients with healed nonoperatively treated midshaft clavicular fracture, and to compare this to their uninjured contralateral shoulder. A secondary goal was to assess the relationship between clavicular shortening and scapular orientation, and between clavicular shortening and functional outcome.     

Effects of metal-on-metal wear on the host immune system and infection in hip arthroplasty

Background and purpose

Joint replacement with metal-on-metal (MOM) bearings have gained popularity in the last decades in young and active patients. However, the possible effects of MOM wear debris and its corrosion products are still the subject of debate. Alongside the potential disadvantages such as toxicity, the influences of metal particles and metal ions on infection risk are unclear.

Methods

We reviewed the available literature on the influence of degradation products of MOM bearings in total hip arthroplasties on infection risk.

Results

Wear products were found to influence the risk of infection by hampering the immune system, by inhibiting or accelerating bacterial growth, and by a possible antibiotic resistance and heavy metal co-selection mechanism.

Interpretation

Whether or not the combined effects of MOM wear products make MOM bearings less or more prone to infection requires investigation in the near future.Many young patients with painful coxarthrosis want to return to a high level of activity and require an implant that provides durability. The low wear rates of metal-on-metal (MOM) bearings have led to a resurgence in the use of MOM bearings (Wagner and Wagner 2000, Silva et al. 2005, Pollard et al. 2006, Vendittoli et al. 2007, Delaunay et al. 2008). 35% of all prostheses in the United States in 2006 (Bozic et al. 2009) and 16% of all prostheses implanted in Australia from 1999 through 2007 had MOM bearings (Graves et al. 2008).Metal alloys used in MOM bearings degrade through wear, from corrosion, or by a combination of the two (Yan et al. 2006, Jacobs et al. 2008). Consequently, MOM bearings produce nanometer- to submicrometer-sized metal particles (Campbell et al. 1996, Doorn et al. 1998). The high number of these very small particles presents a large cumulative surface area for corrosion. The biological effects of these particles and their corrosion products in the human body are for the most part unclear. Since the renewed interest in MOM bearings, extensive research has been done to determine the consequences of local and systemic exposure to wear particles and accompanying biologically active corrosion products (Amstutz and Grigoris 1996). It is well known that metal debris can induce pathological changes such as the release of inflammatory cytokines from macrophages, histiocytosis, fibrosis, and necrosis (Basle et al. 1996, Granchi et al. 1998, Caicedo et al. 2008, 2009). Metal debris is also thought to be associated with hypersensitivity and osteolysis (Hallab et al. 2000, 2010, Goodman 2007b, Carr and DeSteiger 2008, Huber et al. 2009). However, there is very little literature on the bacteriological effects of these degradation products (Anwar et al. 2007, Hosman et al. 2009). It is therefore unclear whether they can influence the risk of infection.The Australian and New Zealand joint registries have shown that between 9% and 15% of all total hip arthroplasty (THA) revisions are carried out because of infections related to the primary prosthesis (Rothwell et al. 2007, Graves et al. 2008). In cases of infection, bacteria adopt a biofilm mode of growth on the surface of the prosthesis, thus increasing the antibiotic resistance and resulting in major difficulties in treatment (Trampuz and Widmer 2006). Removal and replacement of an infected implant is usually required to eliminate the infection (Bozic and Ries 2005, Vincent et al. 2006). Recent research has suggested that particulate debris of any composition promotes bacterial growth by providing a scaffold for bacterial adhesion and biofilm growth (Anwar et al. 2007). On the other hand, high concentrations of metal ions have been shown to have bacteriostatic properties (Hosman et al. 2009).Considering the paucity of publications on the effects of MOM particles on infection, we performed a review of the literature on the influence of MOM wear particles and their corrosion products on the risk of infection.     

Hospital volume affects outcome after total knee arthroplasty: A nationwide registry analysis of 80 hospitals and 59,696 replacements

ResultsThe greater the volume of the hospital, the shorter was the average LOS and LUIC. Smaller hospital volume was not unambiguously associated with increased revision, re-admission, or MUA rates. The smaller the annual hospital volume, the more often patients were discharged home.InterpretationLOS and LUIC ought to be shortened in lower-volume hospitals. There is potential for a reduction in length of stay in extended institutional care facilities.Total knee replacement (TKR) is one of the most common orthopedic procedures, and it is expected to increase markedly in volume (Kurtz et al. 2007). Due to the potentially severe complications and the high economic impact of the procedure, efforts to minimize the risks and optimize perioperative efficiency are important.It has been suggested that increased hospital volume and reduction in length of stay (LOS) at the operating hospital after TKR are related, but there is no consensus (Yasunaga et al. 2009, Marlow et al. 2010, Paterson et al. 2010, Bozic et al. 2010, Styron et al. 2011). In addition, results on the association of hospital volume with re-admission rates (Soohoo et al. 2006b, Judge et al. 2006, Bozic et al. 2010, Cram et al. 2011) and revision risk have been inconclusive (Shervin et al. 2007, Manley et al. 2009, Bozic et al. 2010, Paterson et al. 2010). No-one has tried to study the association between length of uninterrupted institutional care (LUIC), incidence of manipulation under anesthesia (MUA) after TKR, and hospital volume.By combining 5 national-level registries, we examined possible associations between hospital volume and LOS, LUIC, discharge disposition, number of re-admissions within 14 and 42 days, MUA, and revisions after TKR for all knee arthroplasties performed in Finland between 1998 and 2010.     

Low bone mineral density is associated with the onset of spontaneous osteonecrosis of the knee

Background and purpose

The primary event preceding the onset of symptoms in spontaneous osteonecrosis in the medial femoral condyle (SONK) may be a subchondral insufficiency fracture, which may be associated with underlying low bone mineral density (BMD). However, the pathogenesis of SONK is considered to be multifactorial. Women over 60 years of age tend to have higher incidence of SONK and low BMD. We investigated whether there may be an association between low BMD and SONK in women who are more than 60 years old.

Methods

We compared the BMD of 26 women with SONK within 3 months after the onset of symptoms to that of 26 control women with medial knee osteoarthritis (OA). All the SONK patients had typical clinical presentations and met specified criteria on MRI. The BMDs measured at the lumbar spine, ipsilateral femoral neck, and knee condyles and the ratios of medial condyle BMD to lateral condyle BMD (medial-lateral ratios) in the femur and tibia were compared between the two groups. The medial-lateral ratios were used as parameters for comparisons of the BMDs at both condyles.

Results

The mean femoral neck, lateral femoral condyle, and lateral tibial condyle BMDs were between x% and y% lower in the SONK patients than in the OA patients (p < 0.001). The mean femoral and tibial medial-lateral ratios were statistically significantly higher in the SONK patients than in the OA patients.

Interpretation

A proportion of women over 60 years of age have low BMD that progresses rapidly after menopause and can precipitate a microfracture. These findings support the subchondral insufficiency fracture theory for the onset of SONK based on low BMD.The pathogenesis of spontaneous osteonecrosis of the medial femoral condyle (SONK) remains unclear, although a primary vascular insult and trauma are widely accepted as common causes. However, the pathogenesis of SONK is probably multifactorial (Zanetti et al. 2003, Robertson et al. 2009). Thus, it may be difficult to explain SONK for all ages and both sexes based on a single factor. Lotke et al. (1977) first suggested a connection between the onset of SONK and subchondral fracture, which was supported by later reports based on MRI and pathological findings (Lecouvet et al. 1998, Yamamoto and Bullough 2000, Takeda et al. 2008). A subchondral insufficiency fracture may result from underlying osteoporosis (Yamamoto and Bullough 2000). This is consistent with a history of sudden onset of pain without a traumatic event (Ahlbäck et al. 1968). In other cases, obesity (Zanetti et al. 2003), overlying degenerative cartilage changes, meniscal tears (Ahlbäck et al. 1968), and meniscal injury (Robertson et al. 2009) may cause increased mechanical loading in the affected condyle, resulting in subchondral fracture.One study using high-resolution quantitative computed tomography revealed that osteopenia and osteoporosis could be detected in two-thirds of patients with SONK diagnosed by MRI (Zanetti et al. 2003). These observations suggest that some cases of SONK are induced by subchondral insufficiency fracture that may be associated with an underlying low BMD. The incidence of SONK is more common in women than in men, and most of the patients are over 60 years of age (Lotke et al. 1977). A proportion of women older than 60 years have low BMD that progresses rapidly after menopause. Therefore, investigation of women older than 60 years—who may have a common factor—may be useful in clarifying the pathogenesis of SONK. In addition, because previous papers (Houpt et al. 1983, Mears et al. 2009, Robertson et al. 2009) have suggested the presence of preexisting knee osteoarthritis (OA) in patients with SONK, we compared patients with SONK and patients with medial knee OA. We assessed the relationship between recent onset of SONK and low BMD at various locations. We also compared the size of lesions by MRI in our SONK patients with those in previous reports.     

Metal-backed versus all-polyethylene tibial components in primary total knee arthroplasty

Background and purpose

The choice of either all-polyethylene (AP) tibial components or metal-backed (MB) tibial components in total knee arthroplasty (TKA) remains controversial. We therefore performed a meta-analysis and systematic review of randomized controlled trials that have evaluated MB and AP tibial components in primary TKA.

Methods

The search strategy included a computerized literature search (Medline, EMBASE, Scopus, and the Cochrane Central Register of Controlled Trials) and a manual search of major orthopedic journals. A meta-analysis and systematic review of randomized or quasi-randomized trials that compared the performance of tibial components in primary TKA was performed using a fixed or random effects model. We assessed the methodological quality of studies using Detsky quality scale.

Results

9 randomized controlled trials (RCTs) published between 2000 and 2009 met the inclusion quality standards for the systematic review. The mean standardized Detsky score was 14 (SD 3). We found that the frequency of radiolucent lines in the MB group was significantly higher than that in the AP group. There were no statistically significant differences between the MB and AP tibial components regarding component positioning, knee score, knee range of motion, quality of life, and postoperative complications.

Interpretation

Based on evidence obtained from this study, the AP tibial component was comparable with or better than the MB tibial component in TKA. However, high-quality RCTs are required to validate the results.The design of the tibial component is an important factor for implant failure in total knee arthroplasty (TKA) (Pagnano et al. 1999, Forster 2003, Gioe et al. 2007b, Willie et al. 2008, Garcia et al. 2009, KAT Trial Group 2009). The metal-backed (MB) design of tibial component has become predominant in TKA because it is thought to perform better than the all-polyethylene (AP) design (Muller et al. 2006, Gioe et al. 2006, 2007a,b). In theory, the MB tibial component reduces bending strains in the stem, reduces compressive stresses in the cement and cancellous bone beneath the baseplate (especially during asymmetric loading), and distributes load more evenly across the interface (Bartel et al. 1982, 1985, Taylor et al. 1998). However, critics of the MB tibial component claim that there are expensive implant costs, reduced polyethylene thickness with the same amount of bone resection, backside wear, and increased tensile stresses at the interface during eccentric loading (Bartel et al. 1982, 1985, Pomeroy et al. 2000, Rodriguez et al. 2001, Li et al. 2002, Muller et al. 2006, Blumenfeld and Scott 2010, Gioe and Maheshwari 2010).In the past decade, several randomized controlled trials (RCTs) have been performed to assess the effectiveness of the MB tibial component (Adalberth et al. 2000, 2001, Gioe and Bowman 2000, Norgren et al. 2004, Hyldahl et al. 2005a, b, Muller et al. 2006, Gioe et al. 2007, Bettinson et al. 2009, KAT Trial Group 2009). However, data have not been formally and systematically analyzed using quantitative methods in order to determine whether the MB tibial component is indeed optimal for patients in TKA. In this study, we wanted (1) to determine the scientific quality of published RCTs comparing the AP and MB tibial components in TKA using Detsky score (Detsky et al. 1992) and (2) to conduct a meta-analysis and systematic review of all published RCTs that have compared the effects of AP and MB tibial components on the radiographic and clinical outcomes of TKA.     

Hydroxyapatite coating does not improve uncemented stem survival after total hip arthroplasty!: An analysis of 116,069 THAs in the Nordic Arthroplasty Register Association (NARA) database

ResultsUnadjusted 10-year survival with the endpoint revision of any component for any reason was 92.1% (CI: 91.8–92.4). Unadjusted 10-year survival with the endpoint stem revision due to aseptic loosening varied between the stem brands investigated and ranged from 96.7% (CI: 94.4–99.0) to 99.9% (CI: 99.6–100). Of the stem brands with the best survival, stems with and without HA coating were found. The presence of HA coating was not associated with statistically significant effects on the adjusted risk of stem revision due to aseptic loosening, with an HR of 0.8 (CI: 0.5–1.3; p = 0.4). The adjusted risk of revision due to infection was similar in the groups of THAs using HA-coated and non-HA-coated stems, with an HR of 0.9 (CI: 0.8–1.1; p = 0.6) for the presence of HA coating. The commonly used Bimetric stem (n = 25,329) was available both with and without HA coating, and the adjusted risk of stem revision due to aseptic loosening was similar for the 2 variants, with an HR of 0.9 (CI: 0.5–1.4; p = 0.5) for the HA-coated Bimetric stem.InterpretationUncemented HA-coated stems had similar results to those of uncemented stems with porous coating or rough sand-blasted stems. The use of HA coating on stems available both with and without this surface treatment had no clinically relevant effect on their outcome, and we thus question whether HA coating adds any value to well-functioning stem designs.Hydroxyapatite (HA) is thought to improve early implant ingrowth and long-term stability in bone (Overgaard et al. 1997), and many stems intended for uncemented total hip arthroplasty (THA) are thus manufactured with HA coating. Several uncemented stems are only available with HA coating. Some HA-coated stems have excellent long-term outcomes in terms of the risk of revision, both for any reason and due to aseptic loosening (Capello et al. 2003, Shah et al. 2009). Registry data from Norway and Finland also indicate that certain HA-coated stems have excellent survivorship up to 10 years (Eskelinen et al. 2006, Hallan et al. 2007, Makela et al. 2008).On the other hand, a number of studies on stem survival in the setting of randomized trials or smaller observational studies have failed to show beneficial effects of HA coating on clinical outcome and implant survival when compared to alternatives such as porous coating and sand-blasted rough surfaces (McPherson et al. 1995, Tanzer et al. 2001, Kim et al. 2003, Parvizi et al. 2004, Sanchez-Sotelo et al. 2004). Meta-analyses that have pooled data from randomized or cohort studies have come to the conclusion that there is “[…] no clinically beneficial effect to the addition of HA to porous coating alone in primary uncemented hip arthroplasty” (Gandhi et al. 2009, Li et al. 2013). In addition, a Danish registry analysis found that the use of HA coating does not reduce the risk of stem revision (Paulsen et al. 2007). Furthermore, a comparison of 4,772 uncemented Bimetric stems with or without HA coating implanted between 1992 and 2009 did not reveal any difference in survival between the 2 variants (Lazarinis et al. 2011).HA was initially introduced as an implant coating to speed up and facilitate ongrowth and ingrowth of bone and thereby improve fixation, based on comprehensive preclinical and promising clinical documentation (Geesink et al. 1987, Bauer et al. 1991, Overgaard et al. 1997, Karrholm et al. 1998). Later on, concerns were raised due to findings of delamination and generation of HA particles originating from the coating with the potential to trigger osteolysis, acceleration of polyethylene wear, and subsequent implant loosening (Bloebaum and Dupont 1993, Morscher et al. 1998, Lazarinis et al. 2010). Today, there is renewed interest in HA coatings due to possible properties as a carrier for agents aimed at preventing infection (Ghani et al. 2012). Theoretical arguments for and against the use of HA coating can therefore be found. Given the renewed interest in uncemented stems—instigated by favorable outcomes after uncemented stem fixation in younger patients—the question of whether HA coating is beneficial or not is highly relevant (Eskelinen et al. 2006, Hooper et al. 2009, Swedish Hip Arthroplasty Register 2011). We therefore investigated uncemented stems with and without HA coating that are in frequent use in the Nordic countries, regarding early and long-term survival.     

Uncemented femoral revision arthroplasty using a modular tapered,fluted titanium stem: 5- to 16-year results of 163 cases

Background and purpose —

Due to the relative lack of reports on the medium- to long-term clinical and radiographic results of modular femoral cementless revision, we conducted this study to evaluate the medium- to long-term results of uncemented femoral stem revisions using the modular MRP-TITAN stem with distal diaphyseal fixation in a consecutive patient series.

Patients and methods —

We retrospectively analyzed 163 femoral stem revisions performed between 1993 and 2001 with a mean follow-up of 10 (5–16) years. Clinical assessment included the Harris hip score (HHS) with reference to comorbidities and femoral defect sizes classified by Charnley and Paprosky. Intraoperative and postoperative complications were analyzed and the failure rate of the MRP stem for any reason was examined.

Results —

Mean HHS improved up to the last follow-up (37 (SD 24) vs. 79 (SD 19); p < 0.001). 99 cases (61%) had extensive bone defects (Paprosky IIB–III). Radiographic evaluation showed stable stem anchorage in 151 cases (93%) at the last follow-up. 10 implants (6%) failed for various reasons. Neither a breakage of a stem nor loosening of the morse taper junction was recorded. Kaplan-Meier survival analysis revealed a 10-year survival probability of 97% (95% CI: 95–100).

Interpretation —

This is one of the largest medium- to long-term analyses of cementless modular revision stems with distal diaphyseal anchorage. The modular MRP-TITAN was reliable, with a Kaplan-Meier survival probability of 97% at 10 years.Long-term outcome of femoral revision arthroplasty depends on proper restoration of joint mechanics by reconstructing the anatomic center of rotation in combination with fixation that provides long-term stability (Gravius et al. 2011).The published medium- to long-term survival rates of cemented revision THA are between 35% and 91% (Kavanagh and Fitzgerald 1985, Retpen et al. 1989, Stromberg and Herberts 1996, Weber et al. 1996). One stage cemented stem revision leads to increased bone loss (Rader and Eulert 2005) and is associated with a much higher rate of re-revision than cementless femoral stem revision (Dohmae et al. 1988). Cemented revision stems only appear to be advisable for less active patients with an average life expectancy of less than 10 years (Weiss et al. 2011). In comparison, uncemented revision hip arthroplasty gives medium- to long-term survival rates of 60–97% (Head et al. 2001, Engh et al. 2002, Kwong et al. 2003).Over the years, uncemented modular revision stems have become increasingly popular (Fink et al. 2009). In complex revision surgery, modular uncemented femoral implants may overcome the limitations of non-modular and mostly straight stems—for example, the difficulty in establishing femoral leg length, femoral anteversion, and soft tissue tension (Berry 2002, Mumme et al. 2004, Gutierrez et al. 2007). Modular cementless implant systems with a distal diaphyseal press-fit concept provide greater variability in difficult anatomical situations than non-modular revision stems (Berry 2002). The modular-designed components offer the opportunity to customize the prosthesis intraoperatively to the individual anatomical situation, allowing nearly physiological joint reconstruction (Gravius et al. 2011).Based on published studies, the modular cementless MRP-TITAN revision stem with its distal diaphyseal fixation concept has well-proven short-term effectiveness in femoral revision, especially for large femoral defects (types IIC and III, as described by Paprosky et al. (1990)). Previous studies have shown low mechanical failure rates of 2–5% after 4–5 years of follow-up (Wirtz et al. 2000, Mumme et al. 2004, 2007).Due to the relative lack of medium- to long-term results of femoral modular cementless revision surgery in the literature, we investigated the clinical and radiographic medium- to long-term outcome of femoral revision arthroplasty with the MRP-TITAN stem in a consecutive patient series.     

Wrist function recovers more rapidly after volar locked plating than after external fixation but the outcomes are similar after 1 year

Background and purpose

Promising results have been reported after volar locked plating of unstable dorsally displaced distal radius fractures. We investigated whether volar locked plating results in better patient-perceived, objective functional and radiographic outcomes compared to the less invasive external fixation.

Patients and methods

63 patients under 70 years of age, with an unstable extra-articular or non-comminuted intra-articular dorsally displaced distal radius fracture, were randomized to volar locked plating (n = 33) or bridging external fixation. Patient-perceived outcome was assessed with the Disability of the Arm, Shoulder, and Hand (DASH) questionnaire and the Patient-Rated Wrist Evaluation (PRWE) questionnaire.

Results

At 3 and 6 months, the volar plate group had better DASH and PRWE scores but at 12 months the scores were similar. Objective function, measured as grip strength and range of movement, was superior in the volar plate group but the differences diminished and were small at 12 months. Axial length and volar tilt were retained slightly better in the volar plate group.

Interpretation

Volar plate fixation is more advantageous than external fixation, in the early rehabilitation period.The risk of a poor outcome after a fracture of the distal radius increases with malunion (Grewal and MacDermid 2007) and in highly unstable fractures, operative fixation is required to maintain a satisfactory anatomical position. Closed reduction and bridging external fixation rely on ligamentotaxis to reduce and keep the fracture in alignment. It has been used for unstable distal radius fractures for several decades. External fixation requires 5–6 weeks of immobilization, and some fracture redisplacement often occurs after the fixation device has been removed (Dicpinigaitis et al. 2004, Handoll et al. 2007). In later years, there has been a strong trend towards open reduction and internal fixation with volar locked plating in the management of unstable, dorsally displaced, fractures of the distal radius. Volar locked plating facilitates an anatomical reduction of the fracture, it stabilizes the fracture during the entire healing process, and it allows early wrist mobilization. Good results in terms of patient-rated outcome scores, objective function, and radiographic outcome have been reported both in younger and older patients (Orbay and Fernandez 2002, 2004, Kamano et al. 2005, Chung et al. 2006, Oshiege et al. 2007, Jupiter et al. 2009). Several studies have compared dorsal plating (Grewal et al. 2005, Kateros et al. 2010), fragment-specific systems (Abramo et al. 2009), or a mixture of dorsal and volar plating techniques (Kreder et al. 2005, Leung et al. 2008) with external fixation, but there is no substantial evidence to support the use of internal fixation instead of external fixation (Margaliot et al. 2005). Few studies have compared volar locked plating with external fixation, and there is still insufficient evidence regarding which gives the best outcome (Wright et al. 2005, Egol et al. 2008, Rizzo et al. 2008, Wei et al. 2009).We have carried out a randomized comparison of open reduction with volar locked plating and closed reduction with bridging external fixation for unstable dorsally displaced extra-articular and non-comminuted intra-articular fractures of the distal radius. Our hypothesis was that volar locked plating would result in better patient-perceived, objective functional, and radiographic outcome after 12 months than external fixation.     

Dissatisfied patients after total knee arthroplasty: A registry study involving 114 patients with 8–13 years of follow-up

Background and purpose

In 2003, an enquiry by the Swedish Knee Arthroplasty Register (SKAR) 2–7 years after total knee arthroplasty (TKA) revealed patients who were dissatisfied with the outcome of their surgery but who had not been revised. 6 years later, we examined the dissatisfied patients in one Swedish county and a matched group of very satisfied patients.

Patients and methods

118 TKAs in 114 patients, all of whom had had their surgery between 1996 and 2001, were examined in 2009–2010. 55 patients (with 58 TKAs) had stated in 2003 that they were dissatisfied with their knees and 59 (with 60 TKAs) had stated that they were very satisfied with their knees. The patients were examined clinically and radiographically, and performed functional tests consisting of the 6-minute walk and chair-stand test. All the patients filled out a visual analog scale (VAS, 0–100 mm) regarding knee pain and also the Hospital and Anxiety and Depression scale (HAD).

Results

Mean VAS score for knee pain differed by 30 mm in favor of the very satisfied group (p < 0.001). 23 of the 55 patients in the dissatisfied group and 6 of 59 patients in the very satisfied group suffered from anxiety and/or depression (p = 0.001). Mean range of motion was 11 degrees better in the very satisfied group (p < 0.001). The groups were similar with regard to clinical examination, physical performance testing, and radiography.

Interpretation

The patients who reported poor response after TKA continued to be unhappy after 8–13 years, as demonstrated by VAS pain and HAD, despite the absence of a discernible objective reason for revision.The results of TKA are regarded as being favorable (Robertsson et al. 2000, Kane et al. 2005, Nilsdotter et al. 2009, Carr et al. 2012) with few surgical complications and a revision rate of less than 5% after 10 years (Vessely et al. 2006, Robertsson et al. 2010). Poor outcome after primary TKA, apart from the revision, is between 6% and 14% (Anderson et al. 1996, Hawker et al. 1998, Heck et al. 1998, Robertsson et al. 2000, Robertsson and Dunbar 2001, Brander et al. 2003, Noble et al. 2006, Fisher et al. 2007, Wylde et al. 2008, Kim et al. 2009, Bourne et al. 2010, Scott et al. 2010). The reason for poor outcome after TKA may be related to problems with the knee surgery itself, although it has been suggested that extra-articular causes such as hip disease, spine disorder, vascular disease, or reflex sympathetic dystrophy may contribute. Some studies have suggested that factors not primarily related to structural tissue changes, but of psychological nature instead, may be involved (Wylde et al. 2007, Rolfson et al. 2009).The Swedish Knee Arthroplasty Register (SKAR) registers primary arthroplasties performed in Sweden as well as revisions, and has been estimated to capture 97% of the surgeries performed (SKAR 2012). The SKAR sends questionnaires regarding satisfaction to patients who were operated on during certain time periods (Robertsson et al. 2000, and Dunbar 2001). We used the SKAR to identify patients who had not undergone revision surgery and who were dissatisfied with their outcome 2–7 years after TKA surgery. As a reference we chose an age-, sex-, date-of-surgery-, and hospital-matched control group of highly satisfied patients who were operated during the same period. Our aim was to assess the differences between these 2 patient groups.