共查询到20条相似文献,搜索用时 0 毫秒
1.
Alginate as a chondrocyte-delivery substance in combination with a non-woven scaffold for cartilage tissue engineering 总被引:15,自引:0,他引:15
Marijnissen WJ van Osch GJ Aigner J van der Veen SW Hollander AP Verwoerd-Verhoef HL Verhaar JA 《Biomaterials》2002,23(6):1511-1517
For tissue engineering of cartilage, chondrocytes can be seeded in a scaffold and stimulated to produce a cartilage-like matrix. In the present study, we investigated the effect of alginate as a chondrocyte-delivery substance for the construction of cartilage grafts. E210 (a non-woven fleece of polyglactin) was used as a scaffold. When bare' E210 (without alginate and without chondrocytes) was implanted subcutaneously in nude mice for 8 weeks. the explanted tissue consisted of fat and fibrous tissue only. When E210 with alginate but without chondrocytes was implanted in nude mice, small areas of newly formed cartilage were found. Alginate seems to stimulate chondrogenesis of ingrowing cells. When chondrocytes were seeded in E210, large amounts of cartilage were found, independent of the use of alginate. This was expressed by a high concentration of glycosaminoglycans (30 microg/mg w.w.) and the presence of collagen type II (1.5 microg/mg w.w.). Macroscopically the grafts of E210 without alginate were shrunk and warped, whereas the grafts with alginate had kept their original shape during the 8 weeks of implantation. The use of alginate did not lead to inflammatory reactions nor increased capsule formation. In conclusion, the use of alginate to seed chondrocytes in E210 does not influence the amount of cartilage matrix proteins produced per tissue wet weight. However, it provides retention of the graft shape. 相似文献
2.
Fused deposition modeling of novel scaffold architectures for tissue engineering applications. 总被引:25,自引:0,他引:25
Fused deposition modeling, a rapid prototyping technology, was used to produce novel scaffolds with honeycomb-like pattern, fully interconnected channel network, and controllable porosity and channel size. A bioresorbable polymer poly(epsilon-caprolactone) (PCL) was developed as a filament modeling material to produce porous scaffolds, made of layers of directionally aligned microfilaments, using this computer-controlled extrusion and deposition process. The PCL scaffolds were produced with a range of channel size 160-700 microm, filament diameter 260-370 microm and porosity 48-77%, and regular geometrical honeycomb pores, depending on the processing parameters. The scaffolds of different porosity also exhibited a pattern of compressive stress-strain behavior characteristic of porous solids under such loading. The compressive stiffness ranged from 4 to 77 MPa, yield strength from 0.4 to 3.6 MPa and yield strain from 4% to 28%. Analysis of the measured data shows a high correlation between the scaffold porosity and the compressive properties based on a power-law relationship. 相似文献
3.
Feasibility of chitosan-based hyaluronic acid hybrid biomaterial for a novel scaffold in cartilage tissue engineering 总被引:21,自引:0,他引:21
Yamane S Iwasaki N Majima T Funakoshi T Masuko T Harada K Minami A Monde K Nishimura S 《Biomaterials》2005,26(6):611-619
In this study, we hypothesized that hyaluronic acid could provide superior biological effects on the chondrocytes in a three-dimensional culture system. To test this hypothesis, we investigated the in vitro behavior of rabbit chondrocytes on a novel chitosan-based hyaluronic acid hybrid polymer fiber. The goal of the current study was to show the superiority of this novel fiber as a scaffold biomaterial for cartilage tissue engineering. Chitosan polymer fibers (chitosan group) and chitosan-based hyaluronic acid hybrid polymer fibers (HA 0.04% and HA 0.07% groups, chitosan coated with hyaluronic acid 0.04% and 0.07%, respectively) were originally developed by the wetspinning method. Articular chondrocytes were isolated from Japanese white rabbits and cultured in the sheets consisting of each polymer fiber. The effects of each polymer fiber on cell adhesivity, proliferation, morphological changes, and synthesis of the extracellular matrix were analyzed by quantitative a cell attachment test, DNA quantification, light and scanning electron microscopy, semi-quantitative RT-PCR, and immunohistochemical analysis. Cell adhesivity, proliferation and the synthesis of aggrecan were significantly higher in the hybrid fiber (HA 0.04% and 0.07%) groups than in the chitosan group. On the cultured hybrid polymer materials, scanning electron microscopic observation showed that chondrocytes proliferated while maintaining their morphological phenotype and with a rich extracellular matrix synthesis around the cells. Immunohistochemical staining with an anti-type II collagen antibody demonstrated rich production of the type II collagen in the pericellular matrix from the chondrocytes. The chitosan-based hyaluronic acid hybrid polymer fibers show great potential as a desirable biomaterial for cartilaginous tissue scaffolds. 相似文献
4.
近年来,以生物活性陶瓷、聚合物等材料为基础复合而成的人工骨骼材料得到了广泛的研究并取得了巨大的进展。纳米羟基磷灰石(nano Hydroxyapatite,n HA)因其具有良好的生物相容性和生物活性,被大量应用于骨组织的移植与修复,但由于现有工艺制备的磷灰石本身力学性能不够完美,进而限制了其应用的广泛性,因此,制备综合性能优越的纳米羟基磷灰石/聚合物复合生物材料是当今骨组织工程中研究的热点。在此,就纳米羟基磷灰石与壳聚糖、胶原、聚乳酸等高分子材料复合而成的新型骨移植替代材料的合成方法、力学性能和生物相容性进行简单的介绍。 相似文献
5.
Potential use of chitosan as a cell scaffold material for cartilage tissue engineering 总被引:29,自引:0,他引:29
One of the most important factors in any tissue-engineering application is the cell substrate. The purpose of this study was the initial evaluation of chitosan, a derivative of the abundant, naturally occurring biopolymer chitin, as a cell scaffold for cartilage tissue engineering. Chitosan scaffolds having an interconnecting porous structure were easily fabricated by simple freezing and lyophilization of a chitosan solution. After rehydration of scaffolds, porcine chondrocytes were seeded onto scaffolds and cultured for up to 28 days in a rotating-wall bioreactor. Chitosan scaffolds supported cell attachment and maintenance of a rounded cell morphology. After 18 days, cells within the scaffolds had synthesized extracellular matrix in which proteoglycan and type II collagen were detected by toluidine blue staining and immunohistochemistry, respectively. Abundant extracellular matrix was found almost exclusively in the periphery of the scaffolds, as scaffold microstructure prevented cells from penetrating to interior regions. Nonetheless, the results suggest that chitosan scaffolds may be a useful alternative to synthetic cell scaffolds for cartilage tissue engineering. 相似文献
6.
Tissue engineering of cartilage using a hybrid scaffold of synthetic polymer and collagen 总被引:6,自引:0,他引:6
A biodegradable hybrid scaffold of synthetic polymer, poly (DL-lactic-co-glycolic acid) (PLGA), and naturally derived polymer, collagen, was prepared by forming collagen microsponges in the pores of PLGA sponge. This was then used as the three-dimensional scaffold for tissue engineering of bovine articular cartilage, both in vitro and in vivo. In vitro studies show that hybridization with collagen facilitated cell seeding in the sponge and raised seeding efficiency. Chondrocytes adhered to the collagen microsponges, where they proliferated and secreted extracellular matrices with time, filling the space within the sponge. Hematoxylin and eosin staining revealed that most of the chondrocytes after 4 weeks of culture, and almost all cell types after 6 weeks of culture, maintained their phenotypically rounded morphology. While new tissue formed, the scaffold degraded and lost almost 36.9% of its original weight after 10 weeks. Subcutaneous implantation studies in nude mice demonstrated more homogeneous tissue formation in hybrid sponge than in PLGA sponge. The new tissue formed maintained the original shape of the hybrid sponge. The synthetic PLGA sponge, serving as a skeleton, facilitated easy formation into desired shapes and provided appropriate mechanical strength to define the ultimate shape of engineered tissue. Incorporation of collagen microsponges facilitated cell seeding and homogeneous cell distribution and created a favorable environment for cellular differentiation. The hybrid sponge could therefore represent a promising candidate as a three-dimensional scaffold for articular cartilage tissue engineering. 相似文献
7.
Zorlutuna P Tezcaner A Hasirci V 《Journal of biomaterials science. Polymer edition》2008,19(3):399-410
A 3D scaffold, in the form of a foam, with the top surface carrying a micropattern, was constructed from biodegradable polyesters poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) and poly(L-lactide-co-D,L-lactide) (P(L/DL)LA) to serve as a substitute for the extracellular matrix (ECM) of tissues with more than one cell type. The construct was tested in vitro for engineering of such tissues using fibroblasts (3T3) and epithelial cells (retinal pigment epithelial cells, D407). The patterned surface was seeded with D407 cells and the foam was seeded with 3T3 cells to represent a tissue with two different cell types. To improve cell adhesion, the construct was treated with fibronectin. The cells were seeded on the construct in a sequence allowing each type time for adhesion. Cell proliferation, studied by MTS assay, was significantly higher than that of tissue culture polystyrene control by day 14. Scanning electron and fluorescence microscopy showed that the foam side of the construct was highly porous and the pores were interconnected and this allowed cell mobility and proliferation. Immunostaining showed collagen deposition, indicating the secretion of the new ECM by the cells. On the film side of the construct D407 cells formed piles in the grooves and covered the surface completely. It was concluded that the 3D P(L/DL)LA-PHBV construct with one micropatterned surface has a serious potential for use as a tissue engineering carrier in the reconstruction of complex tissues with layered organization and different types of cells in each region. 相似文献
8.
《Journal of biomaterials science. Polymer edition》2013,24(3):399-410
A 3D scaffold, in the form of a foam, with the top surface carrying a micropattern, was constructed from biodegradable polyesters poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) and poly(L-lactide-co-D,L-lactide) (P(L/DL)LA) to serve as a substitute for the extracellular matrix (ECM) of tissues with more than one cell type. The construct was tested in vitro for engineering of such tissues using fibroblasts (3T3) and epithelial cells (retinal pigment epithelial cells, D407). The patterned surface was seeded with D407 cells and the foam was seeded with 3T3 cells to represent a tissue with two different cell types. To improve cell adhesion, the construct was treated with fibronectin. The cells were seeded on the construct in a sequence allowing each type time for adhesion. Cell proliferation, studied by MTS assay, was significantly higher than that of tissue culture polystyrene control by day 14. Scanning electron and fluorescence microscopy showed that the foam side of the construct was highly porous and the pores were interconnected and this allowed cell mobility and proliferation. Immunostaining showed collagen deposition, indicating the secretion of the new ECM by the cells. On the film side of the construct D407 cells formed piles in the grooves and covered the surface completely. It was concluded that the 3D P(L/DL)LA-PHBV construct with one micropatterned surface has a serious potential for use as a tissue engineering carrier in the reconstruction of complex tissues with layered organization and different types of cells in each region. 相似文献
9.
胶原-壳聚糖制备仿生多层结构软骨支架 总被引:1,自引:0,他引:1
目的制备结构与天然软骨结构相似的仿生多层软骨支架。方法采用先后于-20℃和液氮中冷冻的预冻方式,冷冻干燥法制备双层支架。采用-20℃冷冻后,部分熔融再液氮重冻的预冻方式,冷冻干燥制备了厚度约2mm的仿生多层软骨支架。采用XRD和红外光谱观察胶原和壳聚糖的复合情况。采用SEM观察支架的形貌。对比了纯壳聚糖支架、纯胶原支架、胶原壳聚糖复合材料单层支架和仿生多层支架在干燥和湿润两种状态下的力学性能。结果胶原和壳聚糖的复合存在化学反应,复合材料形成更好的孔结构,仿生多层支架从上至下分别具有致密层结构,圆形孔结构和垂直孔结构。支架材料在干燥和湿润状态下的力学性能有很大差别,仿生多层支架在湿润状态下各层具有不同的力学性能。结论仿生多层软骨支架的结构接近于天然关节软骨多层结构,且在湿润状态下各层的力学性能有差异,有望更好地维持软骨细胞表型和提高软骨损伤修复效果。 相似文献
10.
Kong L Ao Q Wang A Gong K Wang X Lu G Gong Y Zhao N Zhang X 《Journal of biomaterials applications》2007,22(3):223-239
In scaffold based bone tissue engineering, both the pore size and the mechanical properties of the scaffold are of great importance. However, an increase in pore size is generally accompanied by a decrease in mechanical properties. In order to achieve both suitable mechanical properties and porosity, a multilayer scaffold is designed to mimic the structure of cancellous bone and cortical bone. A porous nano-hydroxyapatite-chitosan composite scaffold with a multilayer structure is fabricated and encased in a smooth compact chitosan membrane layer to prevent fibrous tissue ingrowth. The exterior tube is shown to have a small pore size (15-40 microm in diameter) for the enhancement of mechanical properties, while the core of the multilayer scaffold has a large pore size (predominantly 70-150 microm in diameter) for nutrition supply and bone formation. Compared with the uniform porous scaffold, the multilayer scaffold with the same size shows an enhanced mechanical strength and larger pore size in the center. More cells are shown to grow into the center of the multilayer scaffold in vitro than into the uniform porous scaffold under the same seeding condition. Finally, the scaffolds are implanted into a rabbit fibula defect to evaluate the osteoconductivity of the scaffold and the efficacy of the scaffold as a barrier to fibrous tissue ingrowth. At 12 weeks post operation, affluent blood vessels and bone formation are found in the center of the scaffold and little fibrous tissue is noted in the defect site. 相似文献
11.
Masuoka K Asazuma T Ishihara M Sato M Hattori H Ishihara M Yoshihara Y Matsui T Takase B Kikuchi M Nemoto K 《Journal of biomedical materials research. Part B, Applied biomaterials》2005,75(1):177-184
The aim of this study was to investigate with tissue engineering procedures the possibility of using atelocollagen honeycomb-shaped scaffolds sealed with a membrane (ACHMS scaffold) for the culturing of chondrocytes to repair articular cartilage defects. Chondrocytes from the articular cartilage of Japanese white rabbits were cultured in ACHMS scaffolds to allow a high-density, three-dimensional culturing for up to 21 days. Although the DNA content in the scaffold increased at a lower rate than monolayer culturing, scanning electron microscopy data showed that the scaffold was filled with grown chondrocytes and their produced extracellular matrix after 21 days. In addition, glycosaminoglycan (GAG) accumulation in the scaffold culture was at a higher level than the monolayer culture. Cultured cartilage in vitro for 14 days showed enough elasticity and stiffness to be handled in vivo. An articular cartilage defect was initiated in the patellar groove of the femur of rabbits and was subsequently filled with the chondrocyte-cultured ACHMS scaffold, ACHMS scaffold alone, or non-filled (control). Three months after the operations, histological analysis showed that only defects inserted with chondrocytes being cultured in ACHMS scaffolds were filled with reparative hyaline cartilage, and thereby highly expressing type II collagen. These results indicate that implantation of allogenic chondrocytes cultured in ACHMS scaffolds may be effective in repairing articular cartilage defects. 相似文献
12.
背景:目前报道的软骨组织工程支架材料,大体分为天然高分子材料、人工合成可降解材料、天然材料与合成高分子材料复合构造的新型生物材料和纳米材料4大类。
目的:总结近年来国内外关于组织工程支架材料的文献,对其进行简要综述,并探讨目前存在的问题和应用前景。
方法:由第一作者应用计算机检索PubMed数据库及中国期刊网全文数据库1997-01/2011-01有关软骨组织工程支架材料的文章,英文检索词为“natural polymer materials,synthetic materials,new biological materials,nanometer materials,scaffold materials,cartilage tissue engineering”,中文检索词为“天然高分子材料,人工合成材料,新型生物材料,纳米材料,支架材料,软骨组织工程”。排除重复性研究,共保留33篇文献进行综述。
结果与结论:软骨组织工程支架已由先前的单一材料逐渐向复合材料转变,其孔隙率更高、抗原性更低、组织相容性更好,软骨细胞的黏附及增殖更好。结合计算机辅助设计和三维打印快速成形技术,将生物可降解材料预制加工成精确形状,通过降解速率较慢的内支撑支架,维持材料支架的精确外形,研发具有一定机械强度、适当孔径和精确外观形状的可降解生物支架材料是未来的发展方向。 相似文献
13.
A three-dimensional nanofibrous scaffold for cartilage tissue engineering using human mesenchymal stem cells 总被引:24,自引:0,他引:24
The utilization of adult stem cells in tissue engineering is a promising solution to the problem of tissue or organ shortage. Adult bone marrow derived mesenchymal stem cells (MSCs) are undifferentiated, multipotential cells which are capable of giving rise to chondrocytes when maintained in a three-dimensional culture and treated with members of the transforming growth factor-beta (TGF-beta) family of growth factors. In this study, we fabricated a nanofibrous scaffold (NFS) made of a synthetic biodegradable polymer, poly(-caprolactone) (PCL), and examined its ability to support in vitro chondrogenesis of MSCs. The electrospun PCL porous scaffold was constructed of uniform, randomly oriented nanofibers with a diameter of 700 nm, and structural integrity of this scaffold was maintained over a 21-day culture period. MSCs cultured in NFSs in the presence of TGF-beta1 differentiated to a chondrocytic phenotype, as evidenced by chondrocyte-specific gene expression and synthesis of cartilage-associated extracellular matrix (ECM) proteins. The level of chondrogenesis observed in MSCs seeded within NFSs was comparable to that observed for MSCs maintained as cell aggregates or pellets, a widely used culture protocol for studying chondrogenesis of MSCs in vitro. Due to the physical nature and improved mechanical properties of NFSs, particularly in comparison to cell pellets, the findings reported here suggest that the PCL NFS is a practical carrier for MSC transplantation, and represents a candidate scaffold for cell-based tissue engineering approaches to cartilage repair. 相似文献
14.
Svensson A Nicklasson E Harrah T Panilaitis B Kaplan DL Brittberg M Gatenholm P 《Biomaterials》2005,26(4):419-431
Tissue constructs for cartilage with native mechanical properties have not been described to date. To address this need the bacterial cellulose (BC) secreted by Gluconacetobacter xylinus (= Acetobacter xylinum) was explored as a novel scaffold material due to its unusual material properties and degradability. Native and chemically modified BC materials were evaluated using bovine chondrocytes. The results indicate that unmodified BC supports chondrocyte proliferation at levels of approximately 50% of the collagen type II substrate while providing significant advantages in terms of mechanical properties. Compared to tissue culture plastic and calcium alginate, unmodified BC showed significantly higher levels of chondrocyte growth. Chemical sulfation and phosphorylation of the BC, performed to mimic the glucosaminoglycans of native cartilage, did not enhance chondrocyte growth while the porosity of the material did affect chondrocyte viability. The BC did not induce significant activation of proinflammatory cytokine production during in vitro macrophage screening. Hence, unmodified BC was further explored using human chondrocytes. TEM analysis and RNA expression of the collagen II from human chondrocytes indicated that unmodified BC supports proliferation of chondrocytes. In addition, ingrowth of chondrocytes into the scaffold was verified by TEM. The results suggest the potential for this biomaterial as a scaffold for tissue engineering of cartilage. 相似文献
15.
Nesti LJ Li WJ Shanti RM Jiang YJ Jackson W Freedman BA Kuklo TR Giuliani JR Tuan RS 《Tissue engineering. Part A》2008,14(9):1527-1537
Degeneration of the intervertebral disc (IVD) represents a significant musculoskeletal disease burden. Although spinal fusion has some efficacy in pain management, spine biomechanics is ultimately compromised. In addition, there is inherent limitation of hardware-based IVD replacement prostheses, which underscores the importance of biological approaches to disc repair. In this study, we have seeded multipotent, adult human mesenchymal stem cells (MSCs) into a novel biomaterial amalgam to develop a biphasic construct that consisted of electrospun, biodegradable nanofibrous scaffold (NFS) enveloping a hyaluronic acid (HA) hydrogel center. The seeded MSCs were induced to undergo chondrogenesis in vitro in the presence of transforming growth factor-beta for up to 28 days. The cartilaginous hyaluronic acid-nanofibrous scaffold (HANFS) construct architecturally resembled a native IVD, with an outer annulus fibrosus-like region and inner nucleus pulposus-like region. Histological and biochemical analyses, immunohistochemistry, and gene expression profiling revealed the time-dependent development of chondrocytic phenotype of the seeded cells. The cells also maintain the microarchitecture of a native IVD. Taken together, these findings suggest the prototypic potential of MSC-seeded HANFS constructs for the tissue engineering of biological replacements of degenerated IVD. 相似文献
16.
Masuoka K Asazuma T Hattori H Yoshihara Y Sato M Matsumura K Matsui T Takase B Nemoto K Ishihara M 《Journal of biomedical materials research. Part B, Applied biomaterials》2006,79(1):25-34
Adipose tissue derived stromal cells (ATSCs), which were isolated from adipose tissue of rabbit, have shown to possess multipotential, that is, they differentiate into osteoblasts and adipocytes in plate-culturing and into chondrocytes in an established aggregate culture using defined differentiation-inductive medium. The aim of this study was to evaluate the utility of ATSCs in tissue engineering procedures for repair of articular cartilage-defects using the atelocollagen honeycomb-shaped scaffold with a membrane sealing (ACHMS-scaffold). We intended to repair full-thickness articular cartilage defects in rabbit knees using autologously cultured ATSCs embedded in the ACHMS-scaffold. ATSCs were incubated within the ACHMS-scaffold to allow a high density and three-dimensional culture with control medium. An articular cartilage defect was created on the patellar groove of the femur, and the defect was filled with the ATSCs-containing ACHMS-scaffold, ACHMS-scaffold alone, or empty (control). Twelve weeks after the operation, the histological analyses showed that only the defects treated with the ATSCs-containing ACHMS-scaffold were filled with reparative hyaline cartilage, highly expressed Type II collagen. These results indicate that transplantation of autologous ATSCs-containing ACHMS-scaffold is effective in repairing articular cartilage defects. 相似文献
17.
Yang B Chen G Li J Zou Q Xie D Chen Y Wang H Zheng X Long J Tang W Guo W Tian W 《Biomaterials》2012,33(8):2449-2461
Stem cell mediated tissue engineering has been acknowledged as a prospective strategy for repairing and replacing damaged and lost tissues. However, the low survival rate of implanted stem cells proves to be a major challenge in the management of transplantation failures. While previous studies have indicated the effectiveness of tissue engineered cell sheets in improving the survival rate of implanted cells, we have recently demonstrated the use of treated dentin matrix (TDM) as a biological scaffold and dental follicle cells (DFCs) as the seeding cells for dentinogenesis and tooth root construction. This study proposes a strategy utilizing TDM with human dental follicle cell sheets (DFCSs) for root regeneration. The biological characteristics and changes of human DFCSs under the effect of TDM were studied with scanning electron microscopy, transmission electron microscopy, immunofluorescence microscopy, immunohistochemistry and quantitative real-time PCR. DFCSs combined with TDM were implanted subcutaneously into the dorsum of mice. Histological examination of the harvested grafts revealed a whirlpool-like alignment of the DFCs in multiple layers that were positive for COLI, integrinβ1, fibronectin and alkaline phosphatase (ALP), suggestive of the formation of a rich extracellular matrix. DFCSs, under the effect of TDM, highly expressed DMP-1 and bone sialoprotein (BSP), indicating their potential for odontogenesis and osteogenesis. Importantly, in vivo, TDM could induce and support DFCSs to develop new dentin-pulp like tissues and cementum-periodontal complexes that were positive for markers such as DSP, nestin and VIII factors, COLI and cementum attachment protein (CAP), implying successful root regeneration. Therefore, DFCSs combined with TDM may prove to be a better strategy for the construction of tooth root, and is a prospective approach that could be utilized for the treatment of root or tooth defect or loss in future. 相似文献
18.
Zaida Álvarez Oscar Castaño Alba A. Castells Miguel A. Mateos-Timoneda Josep A. Planell Elisabeth Engel Soledad Alcántara 《Biomaterials》2014
Regenerative medicine strategies to promote recovery following traumatic brain injuries are currently focused on the use of biomaterials as delivery systems for cells or bioactive molecules. This study shows that cell-free biomimetic scaffolds consisting of radially aligned electrospun poly-l/dl lactic acid (PLA70/30) nanofibers release l-lactate and reproduce the 3D organization and supportive function of radial glia embryonic neural stem cells. The topology of PLA nanofibers supports neuronal migration while l-lactate released during PLA degradation acts as an alternative fuel for neurons and is required for progenitor maintenance. Radial scaffolds implanted into cavities made in the postnatal mouse brain fostered complete implant vascularization, sustained neurogenesis, and allowed the long-term survival and integration of the newly generated neurons. Our results suggest that the endogenous central nervous system is capable of regeneration through the in vivo dedifferentiation induced by biophysical and metabolic cues, with no need for exogenous cells, growth factors, or genetic manipulation. 相似文献
19.
Chen G Sato T Ushida T Hirochika R Shirasaki Y Ochiai N Tateishi T 《Journal of biomedical materials research. Part A》2003,67(4):1170-1180
It has been a great challenge to make the thickness of engineered cartilage adjustable to cover the range of both partial-thickness and full-thickness articular cartilage defects. We developed a novel kind of composite web scaffold that could be used for tissue enginnering of articular cartilage with the thickness adjustable between 200 microm and 8 mm. The composite web showed a unique structure having web-like collagen microsponges formed in the openings of a mechanically strong knitted mesh of poly(lactic-co-glycolic acid). The knitted mesh served as a skeleton reinforcing the composite web, while the web-like collagen microsponges facilitated cell seeding, cell distribution, and tissue formation. Bovine chondrocytes cultured in the composite web showed a spatially even distribution, maintained their natural morphology, and produced cartilaginous extracellular matrices such as type II collagen and aggrecan. The thickness of the implant can be simply adjusted by laminating or rolling the web sheets. Not only did the histological structure of the engineered cartilage patches match the bovine native articular cartilage, but also their dynamic complex modulus, structural stiffness, and phase lag reached 37.8, 57.0, and 86.3% of those of native bovine articular cartilage, respectively. The composite web could be an important scaffold for tissue engineering. 相似文献
20.
In vivo bone tissue engineering using mesenchymal stem cells on a novel electrospun nanofibrous scaffold 总被引:20,自引:0,他引:20
The objective of this study was to assess bone formation from mesenchymal stem cells (MSCs) on a novel nanofibrous scaffold in a rat model. A highly porous, degradable poly(epsilon-caprolactone) (PCL) scaffold with an extracellular matrix-like topography was produced by electrostatic fiber spinning. MSCs derived from the bone marrow of neonatal rats were cultured, expanded, and seeded on the scaffolds. The cell-polymer constructs were cultured with osteogenic supplements in a rotating bioreactor for 4 weeks, and subsequently implanted in the omenta of rats for 4 weeks. The constructs were explanted and characterized by histology, immunohistochemistry, and scanning electron microscopy. The constructs maintained the size and shape of the original scaffolds. Morphologically, the constructs were rigid and had a bone-like appearance. Cells and extracellular matrix (ECM) formation were observed throughout the constructs. In addition, mineralization and type I collagen were also detected. This study establishes the ability to develop bone grafts on electrospun nanofibrous scaffolds in a well-vascularized site using MSCs. 相似文献