Comparison of two diode lasers on bactericidity in root canals—an in vitro study

This in vitro study compares two 810-nm and 940-nm diode lasers on bacterial kill in root canals of extracted human teeth and shows the clinical relevance of different treatment modalities. Ninety root canals of single-rooted human teeth were prepared up to ISO 70, steam sterilized, and assigned to two test groups (810 nm, 940 nm) and one control group. Following an initiatory experiment in which access opening of root canals and surrounding cavity were excluded from irradiation in the main experiment, 60 teeth were inoculated with 2 μl of either Escherichia coli or Enterococcus faecalis suspension. Laser irradiation was performed, additionally including access opening of root canals and surrounding cavity in the laser treatment. Excluding access opening of root canals and surrounding cavity from the laser treatment, the diode laser achieved an average bacterial reduction of Escherichia coli of 76.06% (810 nm) and 68.15% (940 nm), while including access cavities showed an average bacterial reduction of Escherichia coli of 97.84% (810 nm) and 98.83% (940 nm) and an average bacterial reduction of Enterococcus faecalis of 98.8% (810 nm) and 98.66% (940 nm). Diode laser wavelengths are effective in endodontic therapy. It seems to be clinically relevant that additional irradiation of the access cavity produces significantly better bactericidal results.     

Determining the optimal dose of 1940-nm thulium fiber laser for assisting the endodontic treatment

Insufficient cleaning, the complex anatomy of the root canal system, inaccessible accessory canals, and inadequate penetration of irrigants through dentinal tubules minimizes the success of the conventional endodontic treatment. Laser-assisted endodontic treatment enhances the quality of conventional treatment, but each laser wavelength has its own its own limitations. The optimal parameters for the antibacterial efficiency of a new wavelength, 1940-nm Thulium Fiber Laser, were firstly investigated in this study. This paper comprises of two preliminary analyses and one main experimental study, presents data about thermal effects of 1940-nm laser application on root canal tissue, effective sterilization parameters for bacteria, Enterococcus faecalis, and finally the antibacterial effectiveness of this 1940-nm Thulium Fiber Laser irradiation in single root canal. Based on these results, the optimal parameter range for safe laser-assisted root canal treatment was investigated in the main experiments. Comparing the antibacterial effects of four laser powers on an E. faecalis bacteria culture in vitro in 96-well plates showed that the most effective group was the one irradiated with 1 W of laser power (antibacterial effect corresponding to a log kill of 3). After the optimal laser power was determined, varying irradiation durations (15, 30, and 60 s) were compared in disinfecting E. faecalis. Laser application caused significant reduction in colony-forming unit values (CFU) compared with control samples in the 17% ethylenediaminetetraacetic acid (EDTA) group. The results of bacteria counts showed that 1 W with 30 s of irradiation with a 1940-nm thulium fiber laser was the optimal dose for safely achieving maximal bactericidal effect.     

En face optical coherence tomography investigation of apical microleakage after laser-assisted endodontic treatment

The aim of our study was to evaluate the potential of en face optical coherence tomography (OCT) for the detection of apical microleakage after 980 nm and 1,064 nm laser-assisted endodontic treatment. Ninety, human, single-rooted teeth with one straight root canal and closed apices were used. All roots were prepared biomechanically to the working length at an apical size 30 and 0.06 taper. The teeth were divided into three equal groups of 30 samples each, according to the treatment to be applied to the root canal. Group I received 980 nm diode laser (3 W, 0.01 s on time, 0.01 s off time, 5 s per procedure, four procedures); group II received neodymium:yttrium–aluminum–garnet (Nd:YAG) laser (1.5 W, 15 Hz, 5 s per procedure, four procedures). In group III the root canals were approached conventionally only. In all groups the root canal filling was performed with AH Plus endodontic sealer and gutta-percha points. An en face OCT prototype was used for the investigation of apical microleakage. According to one-way analysis of variance (ANOVA) and en face OCT, the number of defects in the laser groups was significantly lower (P < 0.005) than in the control group. No statistical differences were noted between the laser groups (P = 0.049). En face OCT imaging proved that laser-assisted endodontic treatment improved the prognosis of root canal filling and led to a reduction in apical microleakage.     

Comparison of dentin root canal permeability and morphology after irradiation with Nd:YAG, Er:YAG, and diode lasers

The aim of this study was to compare the effects of Nd:YAG, Er:YAG, and diode lasers on the morphology and permeability of root canal walls. The three laser wavelengths mentioned interact differently with dentin and therefore it is possible that the permeability changes caused will determine different indications during endodontic treatment. Twenty-eight human single-rooted teeth were instrumented up to ISO 40 and divided into four groups: group C, control (GC), non-laser irradiated; group N (GN), irradiated with Nd:YAG laser; group E (GE), with Er:YAG laser and group D (GD) with diode laser. After that, the roots were filled with a 2% methylene blue dye, divided into two halves and then photographed. The images were analyzed using Image J software and the percentage of dye penetration in the cervical, middle, and apical root thirds were calculated. Additional scanning electron microscopy (SEM) analyses were also performed. The analysis of variance (ANOVA) showed significant permeability differences between all groups in the middle and cervical thirds (p < 0.05). The Tukey test showed that in the cervical third, GN presented means of dye penetration statistically significantly lower than all of the other groups. In the middle third, GE and GD showed statistically higher dye penetration means than GC and GN. SEM analysis showed melted surfaces for GN, clean wall surfaces with open dentinal tubules for GE, and mostly obliterated dentinal tubules for GD. Er:YAG (2,094 nm) laser and diode laser (808 nm) root canal irradiation increase dentinal permeability and Nd:YAG (1,064 nm) laser decreases dentin permeability, within the studied parameters.     

Stimulatory effect of low-level laser therapy on root development of rat molars: a preliminary study

Several studies suggest a biomodulatory influence of low-level laser irradiation in the inflammatory and reparative processes of dental tissues. The aim of this study was to investigate the stimulatory effect of 808-nm laser irradiation on root development of rat molars and also to evaluate the histological reaction of pulp and periapical tissues. Twenty-four 30-day-old Wistar male rats were randomly assigned to three-time and five-time laser therapy groups. After initial x-ray, using mammography equipment, laser energy was applied at a wavelength of 808 nm (2 J/cm², 100 mW, 20 s) to the midroot area of the lower molars of one side of mouth at repeated intervals of the 48 h. The animals were killed 1 day after the final treatment, and root length development of the experimental samples was compared to contra-lateral non-irradiated molars using mammography. The histological reaction of the pulp and periapical tissue was evaluated under light microscopy. Root development was more advanced in irradiated groups than in the non-irradiated controls (p < 0.001). No significant differences, however, could be found between the root development changes in the three-time and five-time laser therapy groups (p > 0.05). Histological findings showed that the occurrence of secondary cement formation was significantly higher in the irradiation groups compared to the controls (p = 0.003). However, there were no statistically significant differences for the frequencies of pulp hyperemia, periodontal ligament fiber organization, or lamina dura remodeling between the groups (p > 0.05). Under the conditions used in this study, 808-nm low-level laser accelerates the rat molar root development in the presence of favorable histological reactions.     

Bactericidal effect of a Nd:YAG laser on <Emphasis Type="Italic">Enterococcus faecalis</Emphasis> at pulse durations of 15 and 25 ms in dentine depths of 500 and 1,000 μm

The success of endodontic treatment depends on the effective elimination of microorganisms from the root canal, and lasers provide more effective disinfection than conventional treatment using rinsing solutions. The objective of this in vitro study was to determine the bactericidal effect of laser irradiation in dentine of various depths at a wavelength of 1,064 nm and pulse durations of 15 and 25 ms. A total of 90 dentine slices were cut from bovine incisors and divided into two groups (45 slices each) of thickness 500 and 1,000 μm. All were inoculated with a suspension of Enterococcus faecalis (5.07×10⁹ bacteria/ml). Based on the clinically accepted dose (approximately 300 J/cm²), the following laser settings were chosen for this study: 1.75 W, 0.7 Hz for 4 s, three repetitions. The two groups were divided into two subgroups of 15 slices each to be irradiated with pulse durations of 15 and 25 ms. The remaining 15 slices per group were not irradiated to serve as a control. After irradiation, the colony-forming units (CFU) were counted and evaluated. To determine the bactericidal effect of irradiation with different pulse durations, the results in the different groups were compared statistically. For all irradiated subgroups a bactericidal effect was observed at pulse durations of 15 and 25 ms (p=0.0085 and p<0.0001). The corresponding average log kills were 0.29 (15 ms) and 0.52 (25 ms) for 500 μm and 0.15 and 0.3 for 1,000 μm, respectively. The results of this in vitro study showed that Nd:YAG laser irradiation with a pulse duration of 15 ms eliminated an average of 49% and 29% of E. faecalis at dentine depths of 500 μm and 1,000 μm, respectively, and irradiation with a pulse duration of 25 ms eliminated 70% (500 μm) and 50% (1,000 μm). However, these values are lower than those achieved with the established protocol using microsecond pulses.     

Thermal tolerance of <Emphasis Type="Italic">E. faecalis</Emphasis> to pulsed heating in the millisecond range

Our aim was to evaluate thermal damage to endodontic pathogen Enterococcus faecalis (E. faecalis) caused by sub-second laser-generated heat pulses by determining the parameters for the thermal damage survival curve (TDSC). A novel experimental method for thermal pulsing of bacteria in the millisecond range was developed. After cultivation, E. faecalis was inoculated on anodized aluminum substrate and heated with a pulsed Nd:YAG laser. Viability was assessed with both plate count and flow cytometry methods. An E. faecalis TDSC for single-pulse millisecond range heating times was derived from the Arrhenius equation. Results gained from single-pulse heating viability measurements were used to predict the bactericidal effect of multiple sequential pulses (pulse train), and compared to experimental measurements. The thermal damage model was then applied to determine the relationship between laser fluence, pulse width, and the viability decrease of E. faecalis in a simulated root canal disinfection procedure. The application of the model to calculate the required lethal laser fluence levels on dentin during endodontic laser procedures seems to indicate that for endodontic procedures, the sub-millisecond pulsed Nd:YAG lasers are more effective in comparison with continuous-mode diode lasers and will cause less undesirable bulk heating of the tooth and surrounding tissues. The results of the study can be applied to create a model for predicting the impact of sub-second temperature increase on viability of bacteria on various surfaces and calculate required fluences and pulse widths to achieve the aforementioned effects with laser pulses.     

Cytomorphological changes in buccal mucosa of patients treated with low-level 1,064-nm laser radiation

The aim of this study was to examine the cytomorphological changes occurring in the buccal mucosa in patients treated with low-level 1,064-nm laser radiation. Seventeen individuals (12 males, five females) 18–24 years of age were included in the study. Low-level 1,064-nm laser radiation was applied to the right buccal mucosa near the premolar region; this therapy was repeated for 10 days. Buccal epithelial cells were collected from the right and left premolar regions of the individuals with a brush before and after therapy. The specimens collected from the left side were measured cytomorphometrically and used for the control group. Student’s t test was used for statistical comparison of the values of the buccal epithelial cells collected from individuals; a p value < 0.05 was considered statistically significant. None of the patients showed any adverse reactions to the low-level 1,064-nm laser radiation therapy during application. There was no cytogenetic damage to the therapied or non-therapied regions in the buccal mucosa cells, as determined cytomorphologically. The results suggest that low-level 1,064-nm laser radiation therapy has no genotoxic potential. Within the limitations of this study, it can be concluded that low-level 1,064-nm laser radiation therapy may be used safely in dental treatments.     

Low-level laser therapy improves repair following complete resection of the sciatic nerve in rats

The aim of this study is to analyze the effects of low-level laser therapy (LLLT) on the regeneration of the sciatic nerve in rats following a complete nerve resection. Male Wistar rats were divided into a control injury group, injury groups irradiated with a 660-nm laser at 10 or 50 J/cm², and injury groups irradiated with an 808-nm laser at 10 or 50 J/cm². Treatment began 24 h following nerve resection and continued for 15 days. Using the sciatic functional index (SFI), we show that the injured animals treated with 660 nm at 10 and 50 J/cm² had better SFI values compared with the control injury and the 808-nm groups. Animals irradiated with the 808-nm laser at 50 J/cm² show higher values for fiber density than do control animals. In addition, axon and fiber diameters were larger in animals irradiated with 660 nm at 50 J/cm² compared to the control group. These findings indicate that 660-nm LLLT is able to provide functional gait recovery and leads to increases in fiber diameter following sciatic nerve resection.     

The effects of laser irradiation on <Emphasis Type="Italic">Trichophyton rubrum</Emphasis> growth

The effects of various laser wavelengths and fluences on the fungal isolate, Trichophyton rubrum, were examined in vitro. Standard-size isolates of T. rubrum were irradiated by using various laser systems. Colony areas were compared for growth inhibition on days 1, 3, and 6 after laser irradiation. Statistically significant growth inhibition of T. rubrum was detected in colonies treated with the 1,064-nm Q-switched Nd:YAG laser at 4 and 8 J/cm² and 532-nm Q-switched Nd:YAG laser at 8 J/cm². Q-switched Nd:YAG laser at 532- and 1,064-nm wavelengths produced significant inhibitory effect upon the fungal isolate T. rubrum in this in vitro study. However, more in vitro and in vivo studies are necessary to investigate if lasers would have a potential use in the treatment of fungal infections of skin and its adnexa.     

Antimicrobial photodynamic therapy combined with conventional endodontic treatment to eliminate root canal biofilm infection

BACKGROUND AND OBJECTIVE: To compare the effectiveness of antimicrobial photodynamic therapy (PDT), standard endodontic treatment and the combined treatment to eliminate bacterial biofilms present in infected root canals. STUDY DESIGN/MATERIALS AND METHODS: Ten single-rooted freshly extracted human teeth were inoculated with stable bioluminescent Gram-negative bacteria, Proteus mirabilis and Pseudomonas aeruginosa to form 3-day biofilms in prepared root canals. Bioluminescence imaging was used to serially quantify bacterial burdens. PDT employed a conjugate between polyethylenimine and chlorin(e6) as the photosensitizer (PS) and 660-nm diode laser light delivered into the root canal via a 200-micro fiber, and this was compared and combined with standard endodontic treatment using mechanical debridement and antiseptic irrigation. RESULTS: Endodontic therapy alone reduced bacterial bioluminescence by 90% while PDT alone reduced bioluminescence by 95%. The combination reduced bioluminescence by >98%, and importantly the bacterial regrowth observed 24 hours after treatment was much less for the combination (P<0.0005) than for either single treatment. CONCLUSIONS: Bioluminescence imaging is an efficient way to monitor endodontic therapy. Antimicrobial PDT may have a role to play in optimized endodontic therapy.     

Nd:YAG laser clinical assisted in class II furcation treatment

The Nd:YAG laser efficacy associated with conventional treatment for bacterial reduction has been investigated throughout literature. The purpose of this study was to evaluate the bacterial reduction after Nd:YAG laser irradiation associated with scaling and root planning in class II furcation defects in patients with chronic periodontitis. Thirty-four furcation lesions were selected from 17 subjects. The control group received conventional treatment, and the experimental group received the same treatment followed by Nd:YAG laser irradiation (100 mJ/pulse; 15 Hz; 1.5 W, 60 s, 141.5 J/cm²). Both treatments resulted in improvements of most clinical parameters. A significant reduction of colony forming unit (CFU) of total bacteria number was observed in both groups. The highest reduction was noted in the experimental group immediately after the treatment. The number of dark pigmented bacteria and the percentage of patients with Porphyromonas gingivalis, Prevotella intermedia, and Actinobacillus actinomycetemcomitans reduced immediately after the treatment and returned to values close to the initial ones 6 weeks after the baseline for both groups. The Nd:YAG laser associated with conventional treatment promoted significant bacterial reduction in class II furcation immediately after irradiation, although this reduction was not observed 6 weeks after the baseline.     

Effects of the 532-nm and 1,064-nm Q-switched Nd:YAG lasers on collagen turnover of cultured human skin fibroblasts: a comparative study

Cultured human skin fibroblasts were irradiated twice successively with the 1.5 J/cm² of 532-nm and 1,064-nm lasers, respectively. The mRNA of procollagen, matrix metalloproteinases (MMPs), tissue inhibitors of metalloproteinases (TIMPs), heat-shock protein 70 (Hsp70), interleukin-6 (IL-6) and transforming growth factor beta (TGF-β) were analyzed at 24 and 48 h post-irradiation by using RT-PCR. Both lasers significantly increased the expression of type I and III procollagen, TIMP1, and TIMP2, but decreased MMP1 and MMP2 expression. The 1,064-nm laser initiated TGF-β expression while the 532-nm laser elicited the increase of Hsp70 and IL-6. The increase/decrease rates of procollagen, TIMPs and MMPs for the 1,064-nm laser were higher than that of the 532-nm laser. Thus, both lasers effectively accelerated collagen synthesis and inhibited collagen degradation. Collagen synthesis induced by the 1,064-nm laser might be partly due to the upregulation of TGF-β expression, while the increase of Hsp70 and IL-6 might be partly responsible for collagen synthesis stimulated by the 532-nm laser. With the parameters used in this study, the 1,064-nm infrared laser is more effective in promoting the beneficial molecular activities than the 532-nm visible laser.     

Effectiveness of the erbium:YAG laser and new design radial and stripped tips in removing the smear layer after root canal instrumentation

The aim of this study was to analyze in vitro the debriding ability of an Er:YAG laser system (2,940 nm) equipped with a newly designed radial and stripped tip of 400 μm diameter by scanning electron microscopy (SEM). A total of 80 single-rooted extracted human teeth were endodontically prepared with rotary instrumentation and standardized chemical irrigation using 5.25% sodium hypochlorite. At the end of mechanical instrumentation, four different final protocols were used. Group 1 was irrigated for 2 min with saline water as a control group. Groups 2, 3 and 4 were irradiated with an Er:YAG laser at 25 mJ and 15 Hz with a pulse duration of 50 μs and laser spray off using the tip in the coronal opening of the wet root canal. Different solutions and irradiation times were used: group 2 20 s, laser irradiation in sterile distilled water, wet canal; group 3 20 s, laser irradiation in 17% EDTA, wet canal; and group 4 40 s, laser irradiation in 17% EDTA, wet canal. Debridement of and smear layer removal from the apical third of root canals were evaluated by SEM. The study showed that standardized instrumentation, followed by a final Er:YAG laser irradiation in wet canals with EDTA irrigation resulted in more cleaning of the root canal walls and a higher quantity of open tubules in comparison with the traditional irrigation method.     

Influence of laser irradiation on fiber post retention

The purpose of this in vitro study was to compare the bond strength between fiber post and laser-treated root canals. Forty single-rooted bovine teeth were endodontically treated and randomly divided into four groups of equal size according to the root canal treatment: group 1 conventional treatment (without laser irradiation); group 2 Nd:YAG laser (1.5 W, 10 Hz, 100 mJ); group 3 Er,Cr:YSGG laser (0.75 W, 20 Hz); and group 4 Nd:YAG + Er,Cr:YSGG lasers. The fiber posts were cemented with an adhesive system + resin cement, in accordance with the manufacturer’s instructions. A mini acrylic pipe was fixed on the coronal section of the post using a light-polymerized resin. Specimens were mounted on an acrylic pipe with a self-polymerized resin. Retention forces were determined using a universal testing machine (0.5 mm/min). Data were analyzed using one-way ANOVA and Tukey tests (p <0.05). The post retention force in group 2 was found to be lower than that in the other experimental groups. Fractures were observed at the interface between the dentin and the resin in all groups. High-intensity lasers can be used in conventional endodontic treatment; however, root canal surface irradiation using the Nd:YAG laser was shown to negatively affect the post retention force.     

Myocardium tissue ablation with high-peak-power nanosecond 1,064- and 532-nm pulsed lasers: influence of laser-induced plasma

BACKGROUND AND OBJECTIVES: We investigated the mechanism and characteristics of porcine myocardium tissue ablation in vitro with nanosecond 1,064- and 532-nm pulsed lasers at laser intensities up to approximately 5.0 GW/cm(2). Particular attention was paid to study the influence of the laser-induced plasma on the ablation characteristics. The applicability of these two lasers to transmyocardial laser revascularization (TMLR) was discussed. STUDY DESIGN/MATERIALS AND METHODS: Porcine myocardium tissue samples were irradiated with 1,064- and 532-nm, Q-switched Nd:YAG laser pulses, and the ablation depths were measured. The temporal profiles of the laser-induced optical emissions were measured with a biplanar phototube. For the ablated tissue samples, histological analysis was performed with an optical microscope and a polarization microscope. RESULTS: The ablation efficiency at 1,064 nm was higher than that at 532 nm. The ablation threshold at 1,064 nm (approximately 0.8 GW/cm(2)) was lower than that at 532 nm (approximately 1.6 GW/cm(2)), in spite of the lower absorption coefficient being expected at 1,064 nm. For the 1,064-nm laser-ablated tissues, thermal damage was very limited, while damage presumably caused by the mechanical effect was observed in most of the cases. For the 1,064-nm laser ablation, the ablation threshold was equal to the threshold of the laser-induced optical emission (approximately 0.8 GW/cm(2)), while for the 532-nm laser ablation, the optical emission threshold ( approximately 2.4 GW/cm(2)) was higher than the ablation threshold. CONCLUSIONS: We considered that for the 1,064-nm laser ablation, the tissue removal was achieved through a photodisruption process at laser intensities of > approximately 0.8 GW/cm(2). At laser intensities of > 3.0 GW/cm(2), however, the ablation efficiency decreased; this can be attributed to the absorption of incoming laser pulses by the plasma. For the 532-nm laser ablation, the tissue removal was achieved through a photothermal process at laser intensities of > approximately 1.6 GW/cm(2). At laser intensities of > 2.4 GW/cm(2), a photodisruption process may also contribute to the tissue removal, in addition to a photothermal process. With regard to the ablation rates, the 1,064-nm laser was more suitable for TMLR than the 532-nm laser. We concluded that the 1,064-nm Q-switched Nd:YAG laser would be a potential candidate for a laser source for TMLR because of possible fiber-based beam delivery, its compact structure, cost effectiveness, and easy maintenance. Animal trials, however, have to be carried out to evaluate the influence of the tissue damage.     

In vitro preliminary study to evaluate the capability of Er,Cr:YSGG laser in posterior teeth root-canal preparation with step-back technique

This preliminary study was to investigate in vitro the Er,Cr:YSGG laser ablation capability, both range (enlargement aspects of laser tips corresponded to conventional endodontic files) and quality (removing of smear layer and opening of dentinal tubules) to clean and shape the root canal for final obturation step. The crowns of 15 extracted multi-rooted posterior human teeth were resected, and then 15 canals were prepared by an Er,Cr:YSGG laser up to 1.5 W (actual power output) using the step-back technique, while the other 15 canals (control) were enlarged conventionally by K-flex file. The results revealed that posterior root-canal preparation could be achieved by laser beam transmitted to the canal using endodontic tips. At a chosen significance level of α = 1%, the results showed no significant statistical difference between the two groups (P > 0.01). Considering the results of this current study, laser-based root-canal preparation still shows certain limitations, and further improvements are mandatory for higher achievement and better preparation outcomes.     

A clinical comparison of topical piroxicam and EMLA cream for pain relief and inflammation in laser hair removal

The aim of this study was to compare the efficacy of topical piroxicam and EMLA cream on pain control and subsequent inflammation in neodymium:yttrium–aluminum–garnet (Nd:YAG) 1,064 nm laser hair removal in female volunteers. Fifty female volunteers were enrolled in this prospective, randomized, double-blind, clinical study over a 6-month period. Patients were randomly assigned to receive topical piroxicam as group Piroxicam or EMLA cream as group EMLA. Topical analgesics were applied to the treatment sites for 60 min. The pain scores [on a visual analog scale (VAS)] and side effects were recorded before the hair removal, during the hair removal, at the end of the hair removal, and 1 h, 2 h and 24 h after the hair removal. Patients’ characteristics and the treatment settings of the Nd:YAG 1,064 nm laser were similar in the two groups. The pain scores (VAS) were similar, and satisfaction was high in both groups after the hair removal. The number of blanching and erythema episodes were significantly higher in group E than in group P (P < 0.001). Inflammatory side effects were less frequent in group P than in group E after the procedure (P < 0.001). This study showed that topical piroxicam and EMLA provided adequate and similar pain relief after Nd:YAG 1,064 nm laser hair removal in female volunteers. Topical piroxicam was associated with fewer inflammatory side effects than was EMLA cream, because of its anti-inflammatory effect after the procedure.     

Bactericidal effects of different laser wavelengths on periodontopathic germs in photodynamic therapy

 This study was an attempt to clarify whether the bactericidal effects of photodynamic therapy (PDT) are wavelength or dose-dependent. We also attempted to create an optimised protocol for a light-based bactericidal modality to eliminate periodontal pathogens. Cultures of Actinobacillus actinomycetemcomitans, Fusobacterium nucleatum, Porphromonas gingivalis, Prevotella intermedia, and Streptococcus sanguis, were exposed to a He-Ne laser (632.8 nm) with a 30 mW power output, a 100 mW diode laser at 665 nm, or a 100 mW diode laser at 830 nm, in the presence or absence of methylene blue (MB) as a photosensitiser. A control group was also used with exposure to MB alone without laser exposure. The cultures were analysed by viable counts. The results indicated that exposure to the 100 mW laser light could eliminate up to 40% of bacteria on average. In particular, the most effective killing occurred with exposure to laser light in combination with the MB photosensitiser. The results of kinetic studies indicated that the best PDT response rate was achieved with a 60 s (energy density 21.2 J/cm²) exposure to the 665 nm wavelength diode laser in the presence photosensitiser. In this condition, approximately 95% of A. actinomycetemcomitans and F. nucleatum, and 99–100% of the black-pigmented bacteria (P. gingivalis and P. intermedia) and S. sanguis were eliminated. These results showed that both wavelength and energy density are important factors, and that a low power laser of optimal wavelength and dosage, in combination with an appropriate photosensitiser, is a practical bactericidal modality. We concluded that using a diode laser of proper power and wavelength to deliver 60 s of irradiation could be a useful adjunct with mechanical debridement in the prevention of the re-colonisation of subgingival lesions by pathogenic microorganisms. Received: 29 November 2001 / Accepted: 18 June 2002     

Dependence of laser photocoagulation on interstitial delivery parameters

Photocoagulation was performed ex vivo between tissue slabs by delivering continuous-wave laser energy from an optical fiber either directly, or by depositing the energy into a 2.4 mm diameter steel sphere at the fiber tip. The dependence of photocoagulation lesions on the following variables was assessed: (1) energy source: Nd:YAG-532 nm, 1,064 nm ± steel sphere, (2) tissue type: porcine muscle (light), bovine muscle (dark), (3) delivered power: P = 1.5–3.0 W (porcine), 1.0–2.5 W (bovine), (4) exposure duration: T = 300–1500 s. The resulting cross-sectional photocoagulation lesions are summarized as follows: 532 nm: elongated; central charring in all cases; 1,064 nm: circular; central charring only in bovine for P ? 2.0 W, T ? 500 s; sphere: circular; central charring in bovine for P ? 1.5 W and porcine for P ? 2.0 W. These experiments suggest photocoagulation lesion size decreases as optical penetration increases. The results indicate that interstitial laser photocoagulation lesions >10 mm diameter can be made without charring in both lightly and heavily pigmented tissues ex vivo by delivering 1,064 nm laser energy at sufficiently low power for at least 1,000 s from well-polished optical fibers. © 1994 Wiley-Liss, Inc.