首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 28 毫秒
1.
The present work was carried out to synthesize bismuth ferrite (BFO) nanoparticles by combustion synthesis, and to evaluate the photocatalytic activity of synthesized bismuth ferrite nanoparticles against cefixime trihydrate. BFO nanoparticles were successfully synthesized using bismuth (III) nitrate and iron (III) nitrate by a combustion synthesis method employing different types of fuels such as maltose, succinic acid, cinnamic acid, and lactose. The effects of the different types of fuels on the morphology and size of the bismuth ferrite nanoparticles were investigated. Characterization of the as-obtained bismuth ferrite nanoparticles was carried out by different techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-Dispersive Spectroscopy (EDS), N2-sorption analysis, Fourier-transform infrared spectroscopy (FT-IR), and ultraviolet-visible (UV–vis) spectroscopy. Photoluminescence studies were also carried out for the various bismuth ferrite nanoparticles obtained. Degradation of cefixime trihydrate was investigated under sunlight to evaluate the photocatalytic properties of the bismuth ferrite nanoparticles, and it was found that the bismuth ferrite nanoparticles followed first-order degradation kinetics in solar irradiation in the degradation of antibiotic, cefixime trihydrate.  相似文献   

2.
The incorporation of tungsten trioxide (WO3) by various concentrations of graphitic carbon nitride (g-C3N4) was successfully studied. X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Diffused Reflectance UV-Vis techniques were applied to investigate morphological and microstructure analysis, diffused reflectance optical properties, and photocatalysis measurements of WO3/g-C3N4 photocatalyst composite organic compounds. The photocatalytic activity of incorporating WO3 into g-C3N4 composite organic compounds was evaluated by the photodegradation of both Methylene Blue (MB) dye and phenol under visible-light irradiation. Due to the high purity of the studied heterojunction composite series, no observed diffraction peaks appeared when incorporating WO3 into g-C3N4 composite organic compounds. The particle size of the prepared composite organic compound photocatalysts revealed no evident influence through the increase in WO3 atoms from the SEM characteristic. The direct and indirect bandgap were recorded for different mole ratios of WO3/g-C3N4, and indicated no apparent impact on bandgap energy with increasing WO3 content in the composite photocatalyst. The composite photocatalysts’ properties better understand their photocatalytic activity degradations. The pseudo-first-order reaction constants (K) can be calculated by examining the kinetic photocatalytic activity.  相似文献   

3.
This work reported on the solid state synthesis of the flower-like Co(OH)2/g-C3N4 nanocomposite, using a modified hydrothermal method, for the degradation of MB, an organic pollutant. These nanomaterials were characterized for structure, surface morphology and composition using XRD, SEM and XPS, respectively. The photocatalytic activities of the as-prepared materials loaded on FTO glass substrates were evaluated for their degradation of methylene blue (MB) under visible irradiation and constant voltage. The promoting effect of Fw-Co(OH)2 on g-C3N4 was investigated under the influence of introduced various Co(OH)2 amounts. The fabricated composite catalyst showed significantly improved catalytic performance compared to pristine g-C3N4. Degradation by 25% Fw-Co(OH)2/g-C3N4 can achieve about a 100% ratio within 180 min under visible light in a three-electrode system. Moreover, Fw-Co(OH)2/g-C3N4 was easily regenerated and reused, and still possessed good degradation ability. These results suggest that Fw-Co(OH)2/g-C3N4 could be promising for application as a low-cost and high-efficiency catalyst for wastewater treatment and organic pollutant degradation.  相似文献   

4.
A magnetically recyclable Ni/NiO/g-C3N4 photocatalyst with significantly enhanced H2 evolution efficiency was successfully synthesized by a simple ethanol-solvothermal treatment. The presence of electronegative g-C3N4 is found to be the key factor for Ni0 formation in ternary Ni/NiO/g-C3N4, which provides anchoring sites for Ni2+ absorption and assembling sites for Ni0 nanoparticle formation. The metallic Ni0, on one side, could act as an electron acceptor enhancing carrier separation and transfer efficiency, and on the other side, it could act as active sites for H2 evolution. The NiO forms a p–n heterojunction with g-C3N4, which also promotes carrier separation and transfer efficiency. The strong magnetic property of Ni/NiO/g-C3N4 allows a good recyclability of catalyst from aqueous solution. The optimal Ni/NiO/g-C3N4 showed a full-spectrum efficiency of 2310 μmol·h−1·g−1 for hydrogen evolution, which is 210 times higher than that of pure g-C3N4. This ethanol solvothermal strategy provides a facile and low-cost synthesis of metal/metal oxide/g-C3N4 for large-scale application.  相似文献   

5.
In this study, a graphitic carbon nitride and chitosan oligomers (g-C3N4–COS) nanocarrier assembly, which was obtained by cross-linking with methacrylic anhydride (MA), was synthesized and characterized. Its characterization was carried out using infrared spectroscopy, elemental and thermal analyses, and transmission electron microscopy. The new nanocarriers (NCs), with an average particle size of 85 nm in diameter and a 0.25 dispersity index, showed photocatalytic activity (associated with the g-C3N4 moiety), susceptibility to enzymatic degradation (due to the presence of the COS moiety), and high encapsulation and moderate-high release efficiencies (>95% and >74%, respectively). As a proof of concept, the visible-light-driven photocatalytic activity of the NCs was tested for rhodamine B degradation and the reduction of uranium(VI) to uranium(IV). Regarding the potential of the nanocarriers for the encapsulation and delivery of bioactive products for crop protection, NCs loaded with Rubia tinctorum extracts were investigated in vitro against three Vitis vinifera phytopathogens (viz. Neofusicoccum parvum, Diplodia seriata, and Xylophilus ampelinus), obtaining minimum inhibitory concentration values of 750, 250, and 187.5 µg·mL−1, respectively. Their antifungal activity was further tested in vivo as a pruning wound protection product in young ‘Tempranillo’ grapevine plants that were artificially infected with the two aforementioned species of the family Botryosphaeriaceae, finding a significant reduction of the necrosis lengths in the inner woody tissues. Therefore, g-C3N4-MA-COS NCs may be put forward as a multifunctional platform for environmental and agrochemical delivery applications.  相似文献   

6.
Herein, we report the designing of a C3N4/BiOI heterostructure that is supported on gum acacia-crosslinked-poly(acrylamide) hydrogel to fabricate a novel nanocomposite hydrogel. The potential application of the obtained nanocomposite hydrogel to remediate crystal violet dye (CVD) in an aqueous solution was explored. The structural and functional analysis of the nanocomposite hydrogel was performed by FTIR (Fourier transform infrared spectroscopy), X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The different reaction parameters, such as CVD concentration, nanocomposite hydrogel dosage, and working pH, were optimized. The C3N4/BiOI heterostructure of the nanocomposite hydrogel depicts Z-scheme as the potential photocatalytic mechanism for the photodegradation of CVD. The degradation of CVD was also specified in terms of COD and HR-MS analysis was carried to demonstrate the major degradation pathways.  相似文献   

7.
Pure Zn (Zinc) and its Zn–WO3 (Zinc–Tungsten trioxide) composite coatings were deposited on mild steel specimens by applying the electrodeposition technique. Zn–WO3 composites were prepared for the concentration of 0.5 and 1.0 g/L of particles. The influence of WO3 particles on Zn deposition, the surface morphology of composite, and texture co-efficient were analyzed using a variety of techniques, such as X-ray diffraction (XRD) and scanning electron microscopy (SEM) with Energy Dispersive X-ray analysis (EDX). Higher corrosion resistance and microhardness were observed on the Zn–WO3 composite (concentration of 1.0 g/L). The higher corrosion resistance and microhardness of 1.0 g/L Zn–WO3 nanocomposite coatings effectively protect the steel used for the manufacture of products, parts, or systems from chemical or electrochemical deterioration in industrial and marine ambient environments.  相似文献   

8.
Antibiotic contamination has received widespread attention globally. In this work, the oxygen-doped porous graphite carbonitride (g-C3N4) was prepared with urea and ammonium oxalate (CNUC) or urea and glycine (CNUG) as precursors by thermal polymerization. Using bisphenol A (BPA) as a probe and CNUC or CNUG as photocatalysts, the removal performance test was carried out. Meanwhile, all prepared photocatalysts were characterized by XRD, FT-IR, SEM, TEM, XPS, UV-Vis DRS, PL and EIS. Under visible light irradiation, both CNUC and CNUG exhibited about seven and five times greater photocatalytic activity than that of pure g-C3N4, respectively. The radical capture experiments verified that superoxide radicals (•O2) and holes (h+) were the main active species in the photocatalytic degradation of BPA by CNUC, and the possible photocatalytic mechanism of CNUC was proposed. In addition, all these results indicate that CNUC catalyst can effectually inhibit the photocorrosion and keep superior stability. The proposed technique provides a prospective approach to develop nonmetal-modified photocatalysts for future applications.  相似文献   

9.
The elimination of antibiotics occurring in the natural environment has become a great challenge in recent years. Among other techniques, the photocatalytic degradation of this type of pollutant seems to be a promising approach. Thus, the search for new photoactive materials is currently of great importance. The present study concerns the sol–gel synthesis of mono, binary and ternary TiO2-based materials, which are used as active photocatalysts. The main goal was to evaluate how the addition of selected components—zirconium dioxide (ZrO2) and/or zinc oxide (ZnO)—during the synthesis of TiO2-based materials and the temperature of thermal treatment affect the materials’ physicochemical and photocatalytic properties. The fabricated mixed oxide materials underwent detailed physicochemical analysis, utilizing scanning-electron microscopy (SEM), X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), energy-dispersive X-ray spectroscopy (EDS), low-temperature N2 sorption (BET model), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The synthesized mixed oxide materials were used as photocatalysts in the heterogeneous photodegradation of tetracycline (TC). The physicochemical properties of the fabricated photocatalysts, including morphology, crystalline and textural structure, as well as the pH of the reaction system in the photocatalytic tests, were taken into account in determining their photo-oxidation activity. LC–MS/MS analysis was used to identify the possible degradation products of the selected antibiotic.  相似文献   

10.
Graphene has attracted enormous attention owing to its extraordinary properties, while graphene-based nanocomposites hold promise for many applications. In this paper, we present a two-step exploitation method for preparation of graphene oxides and a facile solvothermal route for preparation of few-layer graphene nanosheets and graphene/WO3 nanocomposites in an ethanol-distilled water medium. The as-synthesized samples were characterized by using field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM), ultraviolet-visible (UV-vis) spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric-differential thermal analysis (TG-DTA) and gas-sensing test. The resistivity of the thick-film gas sensors based on sandwich-like graphene/WO3 nanocomposites can be controlled by varying the amount of graphene in the composites. Graphene/WO3 nanocomposites with graphene content higher than 1% show fast response, high selectivity and fine sensitivity to NOx.  相似文献   

11.
Herein we report the development of a nanocomposite for X-ray-induced photodynamic therapy (X-PDT) and computed tomography (CT) based on PEG-capped GdF3:Tb3+ scintillating nanoparticles conjugated with Rose Bengal photosensitizer via electrostatic interactions. Scintillating GdF3:Tb3+ nanoparticles were synthesized by a facile and cost-effective wet chemical precipitation method. All synthesized nanoparticles had an elongated “spindle-like” clustered morphology with an orthorhombic structure. The structure, particle size, and morphology were determined by transmission electron microscopy (TEM), X-ray diffraction (XRD), and dynamic light scattering (DLS) analysis. The presence of a polyethylene glycol (PEG) coating and Rose Bengal conjugates was proved by Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and ultraviolet–visible (UV-vis) analysis. Upon X-ray irradiation of the colloidal PEG-capped GdF3:Tb3+–Rose Bengal nanocomposite solution, an efficient fluorescent resonant energy transfer between scintillating nanoparticles and Rose Bengal was detected. The biodistribution of the synthesized nanoparticles in mice after intravenous administration was studied by in vivo CT imaging.  相似文献   

12.
We investigate mechanical, structural and electronic properties of CO2 adsorbed graphitic carbon nitride (g-C3N4) system under biaxial tensile strain via first-principles calculations. The results show that the stress of CO2 adsorbed g-C3N4 system increases and then decreases linearly with the increasing biaxial strain, reaching maximum at 0.12 strain. This is primarily caused by the plane N–C stretching of the g-C3N4. Furthermore, both the Perdew-Burke-Ernzerhof (PBE) and Heyd- Scuseria-Ernzerhof screened hybrid functional (HSE06) band gaps show direct-indirect transitions under biaxial tensile strain and have the maximum also at 0.12 strain. It is found that there is large dipole transition matrix element around Γ point, leading high optical absorption coefficients of the deformed adsorption system, which would be of great use for the applications of new elastic nanoelectronic and optoelectronic devices.  相似文献   

13.
In this work, a visible-light-driven BiOCl/Bi2WO6 photocatalyst was obtained via a facile hydrothermal method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), ultraviolet/visible light diffuse reflection spectroscopy (UV/Vis), and photocurrent (PC). BiOCl/Bi2WO6 was modified with (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to obtain the cationized BiOCl/Bi2WO6. Cotton fabric was pretreated with sodium hydroxide (NaOH) and sodium chloroacetate solution to obtain carboxymethylated cotton fabric, which was further reacted with cationized BiOCl/Bi2WO6 to achieve finished cotton fabric. The cotton fabrics were characterized by Fourier-transform infrared spectroscopy (FT-IR), XRD, SEM, and EDS. The photocatalytic activity of the BiOCl/Bi2WO6 photocatalyst and cotton fabrics was assessed by photocatalytic degradation of MB (methylene blue) solution under simulated visible light. The self-cleaning property of cotton fabrics was evaluated by removing MB solution and red-wine stains. Results revealed that the coated cotton fabrics exhibited appreciable photocatalytic and self-cleaning performance. In addition, anti-UV studies showed that the finished cotton fabrics had remarkable UV blocking properties in the UVA and UVB regions. Therefore, the finished cotton fabric with BiOCl/Bi2WO6 can provide a framework for the development of multifunctional textiles.  相似文献   

14.
In the present study, we report the first attempt to prepare a conducive environment for Pt/BiVO4 nanocomposite material reusability for the promotion of sustainable development. Here, the Pt/BiVO4 nanocomposite was prepared using a hydrothermal method with various weight percentages of platinum for use in NO2 gas sensors. The surface morphologies and structure of the Pt/BiVO4 nanocomposite were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The results showed that Pt added to BiVO4 with 3 wt.% Pt/BiVO4 was best at a concentration of 100 ppm NO2, with a response at 167.7, and a response/recovery time of 12/35 s, respectively. The Pt/BiVO4 nanocomposite-based gas sensor exhibits promising nitrogen dioxide gas-sensing characteristics, such as fast response, highly selective detection, and extremely short response/recovery time. Additionally, the mechanisms of gas sensing in Pt/BiVO4 nanocomposites were explored in this paper.  相似文献   

15.
Local distortions in perovskites can be induced by cation displacements and/or by the tilting and rotating of cation–anion octahedra. Both phenomena have been subject to intense investigations over many years. However, there are still controversies in the results obtained from experimental techniques that are sensitive to long-range order (X-ray, neutron, or electron diffraction) and those sensitive to short-range order (X-ray absorption spectroscopy). In this study, we probed the details of the local environment in AMoO3 perovskites (A = Ca, Sr, Ba) using extended X-ray absorption fine structure (EXAFS) in a wide temperature range (10–300 K). An advanced analysis of the EXAFS spectra within the multiple-scattering formalism using the reverse Monte Carlo method enhanced by an evolutionary algorithm allowed us (i) to extract detailed information on metal–oxygen and metal–metal radial distribution functions, and metal–oxygen–metal and oxygen–metal–oxygen bond angle distribution functions, and (ii) to perform polyhedral analysis. The obtained results demonstrate the strong sensitivity of the EXAFS spectra to the tilting of [MoO6] octahedra induced by the differences in the sizes of alkaline earth metal cations (Ca2+, Sr2+, and Ba2+).  相似文献   

16.
Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been developed as an ideal pathway for completely eradication of recalcitrant organic pollutants from water environment. Herein, the V-doped graphitic carbon nitride (g-C3N4) is rationally fabricated by one-step thermal polymerization method to activate PMS for contamination decontamination. The results demonstrate the V atoms are successfully integrated into the framework of g-C3N4, which can effectively improve light absorption intensity and enhance charge separation. The V-doped g-C3N4 displays superior catalytic performance for PMS activation. Moreover, the doping content has a great influence on the activation performances. The radical quenching experiments confirm •O2, SO4•−, and h+ are the significant species in the catalytic reaction. This work would provide a feasible strategy to exploit efficient g-C3N4-based material for PMS activation.  相似文献   

17.
{001}TiO2/TiOF2 photocatalytic composites with a high activity {001} crystal plane were prepared by one-step hydrothermal methods using butyl titanate as a titanium source and hydrofluoric acid as a fluorine source. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), raman spectroscopy, N2 adsorption-desorption curve (BET), UV-Vis diffuse absorption spectroscopy (UV-Vis DRS), X-ray photoelectron spectroscopy (XPS), and fluorescence spectroscopy (PL) were used to evaluate the structure, morphology, specific surface area, optical properties, and photocarrier separation ability of {001}TiO2/TiOF2. Ammonia nitrogen was taken as the target pollutant, and the degradation performance of the catalyst was investigated. The results show that hydrofluoric acid improves the content of {001} crystal plane of TiO2 with high activity; it also improves the specific surface area and dispersion of the composite material and adjusts the ratio of {001}TiO2 to TiOF2 in the composite material to enhance the absorption capacity of the composite material and reduce the band gap width of the composite material. The degradation rate of ammonia nitrogen by 100 mg F15 is 93.19% when the initial concentration of ammonia nitrogen is 100 mg/L and pH is 10. Throughout the reaction process, the {001}TiO2/TiOF2 composite produces superoxide anion radical (·O2) and hydroxyl radical (·OH) to oxidize NH3·H2O and generate N2 accompanied by a small amount of NO3 and NO2.  相似文献   

18.
In the study, ZIF-8@BIOI composites were synthesized by the hydrothermal method and then calcined to acquire the ZnO@Bi5O7I composite as a novel composite for the photocatalytic deterioration of the antibiotic tetracycline (TC). The prepared ZnO@Bi5O7I composites were physically and chemically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmet–Teller (BET) surface area, UV–Vis diffuse reflectance spectroscopy (DRS), emission fluorescence spectra, transient photocurrent response, electrochemical impedance spectra and Mott–Schottky. Among the composites formed an n–n heterojunction, which increased the separation efficiency of electrons and holes and the efficiency of charge transfer. After the photocatalytic degradation test of TC, it showed that ZnO@Bi5O7I (2:1) had the best photodegradation effect with an 86.2% removal rate, which provides a new approach to the treatment of antibiotics such as TC in wastewater.  相似文献   

19.
BiFe1−xCrxO3, (0 ≤ x ≤ 10) nanoparticles were prepared through the sol–gel technique. The synthesized nanoparticles were characterized using various techniques, viz., X-ray diffraction, high-resolution field emission scanning electron microscopy (HRFESEM), energy dispersive spectroscopy (EDS), UV–Vis absorption spectroscopy, photoluminescence (PL), dc magnetization, near-edge X-ray absorption spectroscopy (NEXAFS) and cyclic voltammetry (CV) measurements, to investigate the structural, morphological, optical, magnetic and electrochemical properties. The structural analysis showed the formation of BiFeO3 with rhombohedral (R3c) as the primary phase and Bi25FeO39 as the secondary phase. The secondary phase percentage was found to reduce with increasing Cr content, along with reductions in crystallite sizes, lattice parameters and enhancement in strain. Nearly spherical shape morphology was observed via HRFESEM with Bi, Fe, Cr and O as the major contributing elements. The bandgap reduced from 1.91 to 1.74 eV with the increase in Cr concentration, and PL spectra revealed emissions in violet, blue and green regions. The investigation of magnetic field (H)-dependent magnetization (M) indicated a significant effect of Cr substitution on the magnetic properties of the nanoparticles. The ferromagnetic character of the samples was found to increase with the increase in the Cr concentration and the increase in the saturation magnetization. The Fe (+3/+4) was dissolved in mixed-valence states, as found through NEXAFS analysis. Electrochemical studies showed that 5%-Cr-doped BFO electrode demonstrated outstanding performance for supercapacitors through a specific capacitance of 421 F g−1 measured with a scan rate of 10 mV s−1. It also demonstrated remarkable cyclic stability through capacitance retention of >78% for 2000 cycles.  相似文献   

20.
A novel g-C3N4/TiO2/hectorite Z-scheme composites with oxygen vacancy (Vo) defects and Ti3+ were synthesized by so-gel method and high temperature solid phase reaction. This composite exhibited high visible photo-catalytic degradation of rhodamine B (RhB). The apparent rate constant of g-C3N4/TiO2/hectorite was 0.01705 min−1, which is approximately 5.38 and 4.88 times that of P25 and g-C3N4, respectively. The enhancement of photo-catalytic efficiency of the composites can be attributed to the great light harvesting ability, high specific surface area and effective separation of electrons(e) and holes(h+). The F element from Hectorite causes the formation of Vo and Ti3+ in TiO2, making it responsive to visible light. The effective separation of e and h+ mainly results from Z-scheme transfer of photo-produced electrons in g-C3N4/TiO2 interface. The composites can be easily recycled and the degradation rate of the RhB still reached 84% after five cycles, indicating its good reusability.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号