Pediatric tubular pulmonary heart valve from decellularized engineered tissue tubes

Pediatric patients account for a small portion of the heart valve replacements performed, but a pediatric pulmonary valve replacement with growth potential remains an unmet clinical need. Herein we report the first tubular heart valve made from two decellularized, engineered tissue tubes attached with absorbable sutures, which can meet this need, in principle. Engineered tissue tubes were fabricated by allowing ovine dermal fibroblasts to replace a sacrificial fibrin gel with an aligned, cell-produced collagenous matrix, which was subsequently decellularized. Previously, these engineered tubes became extensively recellularized following implantation into the sheep femoral artery. Thus, a tubular valve made from these tubes may be amenable to recellularization and, ideally, somatic growth.The suture line pattern generated three equi-spaced leaflets in the inner tube, which collapsed inward when exposed to back pressure, per tubular valve design. Valve testing was performed in a pulse duplicator system equipped with a secondary flow loop to allow for root distention. All tissue-engineered valves exhibited full leaflet opening and closing, minimal regurgitation (<5%), and low systolic pressure gradients (<2.5 mmHg) under pulmonary conditions. Valve performance was maintained under various trans-root pressure gradients and no tissue damage was evident after 2 million cycles of fatigue testing.     

Minimally immunogenic decellularized porcine valve provides in situ recellularization as a stentless bioprosthetic valve

Currently used bioprosthetic valves have several limitations such as calcification and functional deterioration, and revitalization through cellular ingrowth is impossible. To overcome these obstacles, we have developed a minimally immunogenic tissue-engineered valve that consists of an unfixed, decellularized porcine valve scaffold capable of being spontaneously revitalized in vivo after implantation. Porcine aortic root tissue was decellularized using detergents such as sodium lauryl sulfate and Triton X-100. The porcine valve was treated very gently and plenty of time was allowed for constituents to diffuse in and out of the matrix. In a preliminary study, a piece of decellularized porcine valve tissue was implanted into the rat subdermal space for 14 and 60 days and the structural integrity and calcification were evaluated. As an in vivo valve replacement model, the decellularized porcine valve was implanted in the pulmonary valve position in dogs and functional and histological evaluation was performed after 1, 2, and 6 months. Histological examination showed that the newly developed detergent treatment effectively removed cellular debris from the porcine aortic tissue. Decellularized porcine valve tissue implanted subdermally in rats showed minimal inflammatory cell infiltration and calcification. In the valve replacement model, spontaneous reendothelialization and repopulation of the medial cells were observed within 2 months, and good valve function without regurgitation was observed by echocardiography up to 6 months. The minimally immunogenic decellularized porcine valve proved effective in mitigating postimplant calcification and provided a suitable matrix for revitalizing prostheses through in situ recellularization, cellular ingrowth, and tissue remodeling.     

Progress in developing a living human tissue-engineered tri-leaflet heart valve assembled from tissue produced by the self-assembly approach

The aortic heart valve is constantly subjected to pulsatile flow and pressure gradients which, associated with cardiovascular risk factors and abnormal hemodynamics (i.e. altered wall shear stress), can cause stenosis and calcification of the leaflets and result in valve malfunction and impaired circulation. Available options for valve replacement include homograft, allogenic or xenogenic graft as well as the implantation of a mechanical valve. A tissue-engineered heart valve containing living autologous cells would represent an alternative option, particularly for pediatric patients, but still needs to be developed. The present study was designed to demonstrate the feasibility of using a living tissue sheet produced by the self-assembly method, to replace the bovine pericardium currently used for the reconstruction of a stented human heart valve. In this study, human fibroblasts were cultured in the presence of sodium ascorbate to produce tissue sheets. These sheets were superimposed to create a thick construct. Tissue pieces were cut from these constructs and assembled together on a stent, based on techniques used for commercially available replacement valves. Histology and transmission electron microscopy analysis showed that the fibroblasts were embedded in a dense extracellular matrix produced in vitro. The mechanical properties measured were consistent with the fact that the engineered tissue was resistant and could be cut, sutured and assembled on a wire frame typically used in bioprosthetic valve assembly. After a culture period in vitro, the construct was cohesive and did not disrupt or disassemble. The tissue engineered heart valve was stimulated in a pulsatile flow bioreactor and was able to sustain multiple duty cycles. This prototype of a tissue-engineered heart valve containing cells embedded in their own extracellular matrix and sewn on a wire frame has the potential to be strong enough to support physiological stress. The next step will be to test this valve extensively in a bioreactor and at a later date, in a large animal model in order to assess in vivo patency of the graft.     

新鲜主动脉瓣与肺动脉瓣的解剖学观测及其临床意义

目的：从解剖学方面为自体肺动脉瓣替换主动脉瓣手术提供理论依据。方法：对１１例正常国人新鲜心脏标本的主、肺动脉瓣进行解剖学测量,并对结果进行对比研究。结果：①肺动脉瓣所能承受的压力虽小于主动脉瓣所能承受的压力,但其最小值（２８ｋＰａ）高于正常人体动脉压;②肺动脉瓣及肺动脉窦的各项测量数值均略大于主动脉瓣及主动脉窦,但无统计学意义（Ｐ＞０．０５）。结论：①肺动脉瓣能承受主动脉瓣位置的压力;②主、肺动脉瓣叶及主、肺动脉窦在形态、大小上是匹配的。     

Echocardiographic characteristics of transprosthetic blood peak velocity in the Sorin Bicarbon bileaflet prosthetic heart valve

The Bicarbon prosthetic heart valve with two curved leaflets is designed so that the blood flows through the three orifices are parallel jets of equal size. This study was conducted to confirm that the Bicarbon valve functions clinically as designed. Forty-three patients underwent valve replacement with the Bicarbon valve. Forty-eight Bicarbon valves were implanted: 25 valves in the mitral position and 23 in the aortic position. Peak blood flow velocity through the three prosthetic orifices was measured postoperatively by Doppler echocardiography. The three flow jets through the prosthesis were parallel. The velocity through the lateral orifice was 2.33±0.38 m/min, and the velocity through the central orifice was 2.14±0.43 m/min at the aortic position (P>0.05). The velocity through the lateral orifice was 1.72±0.06 m/min at the mitral position, and that through the central orifice was 1.73±0.06 m/min (P>0.05). Serum lactic acid dehydrogenase values were also lower than those of patients or whom another bileaflet prosthesis had been implanted. The results confirm that the Bicarbon prosthetic heart valve performs clinically as designed, producing three parallel blood flow jets with equal flow velocity.     

Tissue Engineering of Human Heart Valve Leaflets: A Novel Bioreactor for a Strain-Based Conditioning Approach

Current mechanical conditioning approaches for heart valve tissue engineering concentrate on mimicking the opening and closing behavior of the leaflets, either or not in combination with tissue straining. This study describes a novel approach by mimicking only the diastolic phase of the cardiac cycle, resulting in tissue straining. A novel, yet simplified, bioreactor system was developed for this purpose by applying a dynamic pressure difference over a closed tissue engineered valve, thereby inducing dynamic strains within the leaflets. Besides the use of dynamic strains, the developing leaflet tissues were exposed to prestrain induced by the use of a stented geometry. To demonstrate the feasibility of this strain-based conditioning approach, human heart valve leaflets were engineered and their mechanial behavior evaluated. The actual dynamic strain magnitude in the leaflets over time was estimated using numerical analyses. Preliminary results showed superior tissue formation and non-linear tissue-like mechanical properties in the strained valves when compared to non-loaded tissue strips. In conclusion, the strain-based conditioning approach, using both prestrain and dynamic strains, offers new possibilities for bioreactor design and optimization of tissue properties towards a tissue-engineered aortic human heart valve replacement.     

Tissue-engineered heart valve leaflets: an animal study.

BACKGROUND: Tissue-engineered heart valve leaflets are a promising way to overcome the inherent limitations of current prosthetic valves. The aim of this study was to compare the biological responses of an autologous cell seeded scaffold and an acellular scaffold implanted in the pulmonary valve leaflet in the same animal. METHODS: Myofibroblasts and endothelial cells were isolated and cultured from an ovine artery. A synthetic biodegradable scaffold consisting of polyglycolic acid and polylactic acid was initially seeded with the myofibroblasts, then coated with endothelial cells. Cells were seeded using a medium containing collagen and cultured. A tissue-engineered construct and a plain scaffold were implanted as double pulmonary valve leaflet replacement in the same animal in an ovine model (n=3). Additionally, the tissue-engineered construct (n=2) and the plain scaffold (n=2) were implanted as single valve leaflet replacements for long-term analysis. After sacrifice, the implanted valve leaflet tissues were retrieved, analyzed visually and using light microscopy. RESULTS: Three animals that underwent replacement of two valve leaflets with a tissue-engineered construct and a plain scaffold, survived only a short-time (12, 24, 36 hours). The death was attributed to heart failure caused by severe pulmonary insufficiency. Animals that underwent single valve leaflet replacement survived longer and were electively sacrificed at 6 and 9 weeks after operation. The analysis of the leaflets from the short-term survivors showed that the tissue-engineered constructs contained less fibrins and protein exudates than the plain scaffold. In contrast, leaflets obtained from animals surviving 6 and 9 weeks showed similar well organized granulation tissues in the tissue-engineered constructs and the plain scaffolds. CONCLUSION: This animal experiment demonstrates that in the early phase of implantation, the tissue-engineered construct shows a better biological response in terms of antithrombogenicity than the plain scaffold, although both of them have similar results in the later reparative phase.     

The role of collagen cross-links in biomechanical behavior of human aortic heart valve leaflets--relevance for tissue engineering

A major challenge in tissue engineering of functional heart valves is to determine and mimic the dominant tissue structures that regulate heart valve function and in vivo survival. In native heart valves, the anisotropic matrix architecture assures sustained and adequate functioning under high-pressure conditions. Collagen, being the main load-bearing matrix component, contributes significantly to the biomechanical strength of the tissue. This study investigates the relationship between collagen content, collagen cross-links, and biomechanical behavior in human aortic heart valve leaflets and in tissue-engineered constructs. In the main loading direction (circumferential) of native valve leaflets, a significant positive linear correlation between modulus of elasticity and collagen cross-link concentration was found, whereas no correlation between modulus of elasticity and collagen content was found. Similar findings were observed in tissue-engineered constructs, where cross-link concentration was higher for dynamically strained constructs then for statically cultured controls. These findings suggest a dominant role for collagen cross-links over collagen content with respect to biomechanical tissue behavior in human heart valve leaflets. They further suggest that dynamic tissue straining in tissue engineering protocols can enhance cross-link concentration and biomechanical function.     

Presence of a smooth muscle system in aortic valve leaflets

Summary The location and the spatial arrangement of smooth muscle cells in aortic valves have been assessed by a systematic analysis of serial semithin sections of plastic embedded porcine and human aortic leaflets, combined with an electron microscope study.The investigation showed that smooth muscle cells, either single and arranged in thin bundles, and other cell types such as myofibroblasts are constantly present in the aortic valve leaflets. In addition, it was possible to devise a model of the three dimensional, specific organization of the smooth muscle bundles which can be interpreted as an intrinsic muscle system of the leaflets. As the muscular elements might play an active role in the normal functioning of the valve, their presence should be taken into account in designing (bio) prosthetic leaflets and in the evaluation of valve pathology.This work was supported by grant CT76 01159904 from CNR (Rome)     

Tri-layered elastomeric scaffolds for engineering heart valve leaflets

Tissue engineered heart valves (TEHVs) that can grow and remodel have the potential to serve as permanent replacements of the current non-viable prosthetic valves particularly for pediatric patients. A major challenge in designing functional TEHVs is to mimic both structural and anisotropic mechanical characteristics of the native valve leaflets. To establish a more biomimetic model of TEHV, we fabricated tri-layered scaffolds by combining electrospinning and microfabrication techniques. These constructs were fabricated by assembling microfabricated poly(glycerol sebacate) (PGS) and fibrous PGS/poly(caprolactone) (PCL) electrospun sheets to develop elastic scaffolds with tunable anisotropic mechanical properties similar to the mechanical characteristics of the native heart valves. The engineered scaffolds supported the growth of valvular interstitial cells (VICs) and mesenchymal stem cells (MSCs) within the 3D structure and promoted the deposition of heart valve extracellular matrix (ECM). MSCs were also organized and aligned along the anisotropic axes of the engineered tri-layered scaffolds. In addition, the fabricated constructs opened and closed properly in an ex vivo model of porcine heart valve leaflet tissue replacement. The engineered tri-layered scaffolds have the potential for successful translation towards TEHV replacements.     

利用人骨髓基质干细胞构建组织工程心脏瓣膜的体外实验

BACKGROUND:Nowadays, mechanical or biological valve recipients used in the clinic are still at the risk of infection, hemorrhage, thrombosis and reoperation owing to valve stenosis. Tissue-engineered heart valve with biological activity can overcome the disadvantages above. While, the optimal choice of scaffolds and seeding cells remains disputable. OBJECTIVE:To explore the feasibility to construct tissue-engineered heart valve with acellularized porcine aortic valve scaffold and human bone marrow stromal stem cells in vitro. METHODS:The porcine aortic valves were decellularized with the detergent and enzymatic extraction process to remove the cellular components. Human bone marrow stromal stem cells were aspirated from sternum of the patients with simple congenital heart malformation, and then the cells were seeded on the acellularized porcine aortic valve scaffold and cultured for 5 days. RESULTS AND CONCLUSION:Flow cytometry identified that the characteristics of surface antigen of the inoculated seed cells were in line with those of human bone marrow stromal stem cells. Light microscopy and electron microscopy confirmed that the cellular components in the porcine aortic valves could be removed to obtain the complete acellular fiber mesh stent. There was no significant difference in biomechanical property between before and after acellularization. The human bone marrow stromal stem cells implanted on the acellularized porcine aortic valve scaffold could form a continuous cell layer on the surfaces of the scaffold. The inoculated bone marrow stromal stem cells could be differentiated into fibroblasts. The implantation of human bone marrow stromal stem cells on the acellularized porcine aortic valve scaffold can construct the tissue-engineered heart valve.     

A novel crosslinking method for improved tear resistance and biocompatibility of tissue based biomaterials

Over 300,000 heart valve replacements are performed annually to replace stenotic and regurgitant heart valves. Bioprosthetic heart valves (BHVs), derived from glutaraldehyde crosslinked (GLUT) porcine aortic valve leaflets or bovine pericardium are often used. However, valve failure can occur within 12–15 years due to calcification and/or progressive degeneration. In this study, we have developed a novel fabrication method that utilizes carbodiimide, neomycin trisulfate, and pentagalloyl glucose crosslinking chemistry (TRI) to better stabilize the extracellular matrix of porcine aortic valve leaflets. We demonstrate that TRI treated leaflets show similar biomechanics to GLUT crosslinked leaflets. TRI treated leaflets had better resistance to enzymatic degradation in vitro and demonstrated better tearing toughness after challenged with enzymatic degradation. When implanted subcutaneously in rats for up to 90 days, GLUT control leaflets calcified heavily while TRI treated leaflets resisted calcification, retained more ECM components, and showed better biocompatibility.     

Normal Physiological Conditions Maintain the Biological Characteristics of Porcine Aortic Heart Valves: An <Emphasis Type="Italic">Ex Vivo</Emphasis> Organ Culture Study

The aortic valve functions in a complex mechanical environment which leads to force-dependent cellular and tissue responses. Characterization of these responses provides a fundamental understanding of valve pathogenesis. The aim of this work was to study the biological characteristics of native porcine aortic valves cultured in an ex vivo pulsatile organ culture system capable of maintaining physiological pressures (120/80 mmHg) and cardiac output (4.2 l/min). Collagen, sGAG and elastin contents of the valve leaflets were measured and cusp morphology, cell phenotype, cell proliferation and apoptosis were examined. Presence of endothelial cells (ECs) on the leaflet surface was also evaluated. The differences in collagen, sGAG and elastin contents were not significant (p > 0.05) between the cultured and fresh valve leaflets. The cultured valves maintained the native ECM composition of the leaflets while preserving the morphology and cell phenotype. Cell phenotype in leaflets incubated statically under atmospheric conditions decreased compared to fresh and cultured valve leaflets, indicating the importance of mechanical forces in maintaining the natural biology of the valve leaflets. ECs were retained on the surfaces of cultured leaflets with no remodeling of the leaflets. The number of apoptotic cells in the cultured leaflets was significantly (p < 0.05) less than in the statically incubated leaflets and comparable to fresh leaflets. The sterile ex vivo organ culture system thus maintained the viability and native biological characteristics of the aortic valves that were cultured under dynamic conditions for a period of 48 h.     

Dynamic particle image velocimetry study of the aortic flow field of contemporary mechanical bileaflet prostheses

The characteristics of mechanical bileaflet valves, the leaflets of which open at the outside first, differ significantly from those of natural valves, whose leaflets open at the center first, and this fact affects the flow field down-stream of the valves. The direction of jet-type flows, which is influenced by this difference in valve features, and the existence of the sinus of Valsalva both affect the flow field inside the aorta in different ways, depending on the valve design. There may also be an influence on the coronary circulation, the entrance to which resides inside the sinus of Valsalva. A dynamic particle image velocimetry (PIV) study was conducted to analyze the influence of the design of prosthetic heart valves on the aortic flow field. Three contemporary bileaflet prostheses, the St. Jude Medical (SJM) valve, the On-X valve (with straight leaflets), and the MIRA valve (with curved leaflets), were tested inside a simulated aorta under pulsatile flow conditions. A dynamic PIV system was employed to analyze the aortic flow field resulting from the different valve designs. The two newer valves, the On-X and the MIRA valves, open more quickly than the SJM valve and provide a wider opening area when the valve is fully open. The SJM valve's outer orifices deflect the flow during the accelerating flow phase, whereas the newer designs deflect the flow less. The flow through the central orifice of the SJM valve has a lower velocity compared to the newer designs; the newer designs tend to have a strong flow through all orifices. The On-X valve generates a simple jet-type flow, whereas the MIRA valve (with circumferentially curved leaflets) generates a strong but three-dimensionally diffuse flow, resulting in a more complex flow field downstream of the aortic valve. The clinically more adapted 180 degrees orientation seems to provide a less diffuse flow than the 90 degrees orientation does. The small differences in leaflet design in the bileaflet valves generate noticeable differences in the aortic flow; the newer valves show strong flows through all orifices.     

Measurements of the effects of decellularization on viscoelastic properties of tissues in ovine, baboon, and human heart valves

In the development of tissue-engineered heart valves based on allograft decellularized extracellular matrix scaffolds, the material properties of the implant should be ideally comparable to the native semilunar valves. This investigation of the viscoelastic properties of the three functional aortic/pulmonary valve tissues (leaflets, sinus wall, and great vessel wall) was undertaken to establish normative values for fresh samples of human valves and to compare these properties after various steps in creating scaffolds for subsequent bioreactor-based seeding protocols. Torsional wave methods were used to measure the viscoelastic properties. Since preclinical surgical implant validation studies require relevant animal models, the tests reported here also include results for three pairs of both ovine and baboon aortic and pulmonary valves. For human aortic valves, four cryopreserved valves were compared with four decellularized scaffolds. Because of organ and heart valve transplant scarcity for pulmonary valves, only three cryopreserved and two decellularized pulmonary valves were tested. Leaflets are relatively soft. Loss angles are similar for all tissue samples. Regardless of species, the decellularization process used in this study has little effect on viscoelastic properties.     

Biomechanical characterization of aortic valve tissue in humans and common animal models

Aortic valve disease develops in an escalating fashion in elderly patients. Current treatments including total valve replacement and valve repair techniques are still suboptimal. A thorough understanding of the animal and human valve tissue properties, particularly their differences, is crucial for the establishment of preclinical animal models and strategies for evaluating new valve treatment techniques, such as transcatheter valve intervention and tissue engineered valves. The goal of this study was to characterize and compare the biomechanical properties and histological structure of healthy ovine, porcine, and human aortic valve leaflets. The biaxial mechanical properties of the aortic valve leaflets of 10 ovine (～1 year), 10 porcine (6-9 months), and 10 aged human (80.6 ± 8.34) hearts were quantified. Tissue microstructure was analyzed via histological techniques. Aged human aortic valve leaflets were significantly less compliant than both ovine and porcine leaflets, with the ovine leaflets being the most compliant. Histological analysis revealed structural differences between the species: the human and porcine leaflets contained more collagen and elastin than the ovine leaflets. Significant mechanical and structural differences in the aortic valve tissues of 6- to 9-month-old porcine models and 1-year-old ovine models with respect to those of aged humans, suggest that these animal models may not be representative of the typical patient undergoing aortic valve replacement.     

Influence of receptor activator of nuclear factor kappa B on human aortic valve myofibroblasts

Calcific aortic valve stenosis, the main heart valve disease in the elderly, is based on progressive calcification and fibrous thickening of the valve. Several reports addressed the pathogenesis of tissue calcification in this disorder, but few data exist on the molecular mechanisms of the fibrosis and remodeling of the extracellular matrix. The cytokine "receptor activator of nuclear factor kappa B ligand" (RANKL), is expressed in stenotic aortic valves and involved in valvular calcification during calcific aortic valve stenosis. The present study aimed to assess the influence of RANKL on the molecular mechanisms of connective tissue remodeling. In an established cell culture model of primary human aortic valve myofibroblasts, stimulation with RANKL increased cell proliferation as compared to medium alone. Matrix metalloproteinase (MMP)-1 was detectable time-dependently in conditioned media from RANKL-stimulated cells, but absent in media from control cells. MMP-1 activity was increased by RANKL, as measured by collagenase activity assay. Zymography showed an increase in active MMP-2 in RANKL-stimulated cells. These results support the concept that MMPs are involved in the connective tissue remodeling during calcific aortic valve stenosis. RANKL might regulate this process by promoting cell proliferation and MMP expression and activation.     

不同钙化模式对经导管主动脉瓣膜植入效果影响的数值模拟研究

目的通过有限元方法评估不同钙化模式对经导管主动脉瓣膜植入效果的影响。方法根据钙化斑块在主动脉瓣叶上的位置不同,建立对合线钙化模型、附着线钙化模型和圆圈钙化模型3种不同钙化形式的主动脉根部模型。使用ABAQUS软件仿真自膨胀经导管主动脉瓣膜植入3个钙化模型中的过程,分析不同钙化模型对主动脉根部应力、瓣架变形以及瓣周间隙的影响。结果圆圈钙化模型中钙化斑块的最大主应力最大,为18.42 MPa,可能导致假体植入后发生脑卒中的风险更高;圆圈钙化模型的瓣架变形程度也最大,可能导致更差的假体耐久性;附着线钙化模型的瓣周间隙面积为37.2 mm~2,超过其他模型的2倍,植入后出现严重瓣周返流的风险可能性更高。结论不同的主动脉瓣叶钙化模式与经导管主动脉瓣膜植入后的主动脉根部应力、瓣架变形以及瓣周间隙有关,对术后并发症和假体耐久性产生影响。研究结果为临床上经导管主动脉瓣膜植入术术后效果的预测提供参考。