Soft tissue outcome after mandibular advancement—an anthropometric evaluation of 171 consecutive patients

Objectives

There is an ongoing discussion in the literature about preoperative planning and postoperative evaluation of orthognathic surgery and its impact on facial appearance and aesthetics.

Materials and Methods

We present an anthropometric and cephalometric evaluation of orthognathic surgery results based on reference anthropometric data. In 171 Class II patients, mandibular advancement by bilateral sagittal split osteotomy was performed. Preoperative as well as 3 and 9 months postoperative standardized frontal view and profile photographs and lateral cephalograms were evaluated in a standardized manner by use of 21 anthropometric indices. In cephalograms, SNA and SNB angle as well as Wits appraisal were investigated. Results of anthropometric and cephalometric measurements were correlated.

Results

Lower vermilion contour, vermilion and cutaneous total lower lip height, nose–lower face height, nose–face height, upper face–face height, upper lip– and chin–mandible height index showed significant pre- to postoperative changes as well as SNB angle and Wits appraisal. Furthermore, medial–lateral cutaneous upper lip height, vermilion and cutaneous total lower lip height and philtrum–mouth width index presented significant correlations to cephalometric measurements.

Conclusions

The investigated anthropometric indices and cephalometric measurements presented reproducible results related to surgery. The correlation of cephalometric to anthropometric measurements has been proven useful for preoperative planning and postoperative evaluation of orthognathic surgery patients.

Clinical relevance

The presented anthropometric measurements and their observed correlation to cephalometric measurements could lead to a better prediction and optimized planning of the soft tissue result in orthognathic surgery patients and thereby improve the aesthetic outcome.     

The transconjunctival approach for orbital bony surgery: in which cases should it be used?

The advantages and disadvantages of the transconjunctival approach were examined to determine its indication for orbital bony surgery. The transconjunctival approach was used in 22 patients. The average follow-up was 13 months. Two patients had an intraoperative lower eyelid laceration because of excessive traction. Lower eyelid retraction occurred in 5 patients after surgery, although only 1 of them required surgical repair. With a transconjunctival approach alone, the exposure of the orbital lateral wall is limited and incorporation of a lateral incision has been found to be necessary. Postoperative eyelid retraction seems to occur even in the transconjunctival approach. The transconjunctival approach is best indicated in cases with an orbital medial wall fracture because it provides much easier access than any cutaneous approach.     

Cheek rotation flap reconstruction—an anthropometric appraisal of surgical outcomes

Objectives

Cheek rotation flaps are an established surgical procedure for coverage of facial skin defects especially of the cheek and infraorbital region. A comparison of pre- and postoperative anthropometric measurements may help to objectify intraoperative estimations with regards to postoperative appearance.

Materials and methods

We present an evaluation of 31 patients undergoing periorbital reconstruction by a cheek rotation flap on standardized photographs based on reference anthropometric data. Analysis included intercanthal, binocular and eye fissure width, eye fissure, lid sulcus and upper lid height, upper and lower iris coverage, position of cornea to palpebra inferior, scleral show, ectropion, and canthal tilt. Furthermore, it was clearly differentiated whether the defect to cover included eyelid skin or not.

Results

Ectropion showed a significant association to surgery (p?=?0.03) and time (p?=?0.03). If the defect to cover included lower eyelid skin, lower iris coverage values decreased significantly (p?=?0.02), meanwhile the rate of scleral show increased significantly (p?<?0.01), indicating pre- to postoperative lower eyelid retraction.

Conclusions

In all patients analyzed, indices were reproducible and reliable. An association between surgery and ectropion was detectable. Whenever lower eyelid skin is involved in the defect to be covered, the significantly decreased lower iris coverage and increased rate of scleral show indicate an increased risk of lower lid retraction.

Clinical relevance

Whenever eyelid skin is involved in a defect to be covered by a cheek rotation flap, there is an increased risk of postoperative lower lid distortion. Special care has to be taken to perform techniques preventing lower lid retraction.     

The combined coronal–transconjunctival approach: an innovative surgical access for orbital exenteration in craniofacial resection

Malignant tumours arising in the paranasal sinuses or maxilla usually spread to the surrounding regions. The skull base and the anterior cranial fossa are frequently affected as well. When the resection of a tumour involves an orbital exenteration, a transconjunctival-perilimbic incision can be added to a coronal approach in order to preserve the eyelids and the conjunctiva, avoiding cutaneous midfacial incisions. Patients with a diagnosis of malignant tumour affecting the orbit, upper jaw, paranasal sinuses, and/or anterior skull base were eligible for this technique. Tumoural invasion of the eyelids, conjunctiva, lacrimal system, or surrounding skin was considered a contraindication for this technique. A retrospective study of the clinical records was performed and age, type of tumour, location, and reconstructive technique were evaluated. Eight patients referred to the study department between 2015 and 2019 were selected. All patients underwent craniofacial surgery and orbital exenteration. The transconjunctival-perilimbic approach was combined with a coronal incision in all cases. In our experience, the transconjunctival-perilimbic approach to orbital exenteration proposed in this paper can be used successfully in skull base surgery. Combined with a coronal and transmandibular approach, it allows wide access to the facial skeleton/anterior skull base while avoiding skin incisions in the midface.     

Comparison of rim-sparing versus rim-removal techniques in deep lateral wall orbital decompression for Graves’ orbitopathy

The aim of this study was to compare the surgical outcomes of deep lateral orbital decompression using the rim-sparing technique versus the rim-removal technique in Graves’ orbitopathy (GO). A retrospective cohort study of 75 orbits in 50 patients with GO was performed. Proptosis, best corrected visual acuity (BCVA), intraocular pressure (IOP), upper and lower lid margin to reflex distances (MRD-1 and MRD-2, respectively), diplopia, ocular restriction, and GO quality of life (GO-QOL) questionnaire results were analyzed pre- and postoperatively. The average proptosis reduction ranged from 3.5 mm to 6.7 mm with the rim-sparing technique and from 3.6 mm to 6.7 mm with the rim-removal technique (P > 0.05). All orbits with dysthyroid optic neuropathy in the rim-sparing group and 87.5% of such orbits in the rim-removal group showed improved BCVA (P = 0.321). Reductions in IOP, MRD-1, and MRD-2 were observed with both techniques. Patients in the rim-sparing group had greater improvements in GO-QOL appearance score (P = 0.043). In conclusion, rim-sparing orbital decompression provides efficacious outcomes with greater improvements in patient quality of life than the rim-removal technique. The rim-sparing technique should be considered as a preferable option because it preserves the integrity of the lateral vertical maxillary buttress and bony protection for the orbital contents.     

Assessing the precision of posttraumatic orbital reconstruction through “mirror” orbital superimposition: A novel approach for testing the anatomical accuracy

Orbital reconstruction in cases of trauma is usually performed using the unaffected side orbital volume as a reference, but this measurement does not fully consider the anatomical characteristics of orbital surfaces.We propose a novel procedure based on the registration of 3D orbital segmented surfaces. Reconstructed orbits from 20 patients and healthy orbits from 13 control subjects were segmented from the post-operative CT-scans. The 3D orbital model from the unaffected orbit was “mirrored” according to the sagittal plane and superimposed onto the reconstructed one, with calculation of volumes, asymmetry index and point-to-point RMS (root mean square) distances. Inter- and intra-observer errors were tested through Bland–Altman plot. Differences in volume, asymmetry index and RMS value between the control group and the treated patients were assessed through two-way ANOVA and Student's t-test (p < 0.05).According to Bland–Altman test, intra- and inter-operator repeatability was respectively 87% and 89%. No significant differences in volume or asymmetry index between the control group and the treated patients were observed (p > 0.05), but the RMS value was significantly larger in the latter ones (on average, 0.90 ± 0.26 mm vs. 0.67 ± 0.17 mm, p < 0.05).Results show that the reconstructed orbits present a morphologically different surface from the unaffected ones.     

One-year evaluation of an Ormocer restorative—a multipractice clinical trial

The purpose of this ongoing prospective long-term study was to evaluate the clinical performance of Ormocer restorative material in combination with a self-conditioning adhesive. Five operators at five clinics placed 356 restorations (48 class I, 150 class II, 63 class III, 32 class IV, and 63 class V) in 117 patients aged 17 to 65 years. All fillings were placed with cotton roll isolation and clear matrix bands for class III and IV restorations, and metal matrix bands and an incremental placement technique were used for class II restorations. In follow-up examinations after 6 and 12 months, modified Ryge criteria were recorded on all restorations. With 33 randomly selected class I and II restorations, measurements of occlusal wear (via 3D laser scanner) and qualitative and quantitative marginal analysis (via scanning electron microscope) were performed using a replica technique. After placing the fillings, patients reported postoperative hypersensitivity corresponding to B scores in 19 cases and to C scores in four cases. At 12-month recall, 328 restorations were available for evaluation. Losses in the five cavity classes (I, II, III, IV, V) numbered 0, 2, 0, 1, and 6, respectively. The percentages of retained restorations for clinical parameters in four categories (Alpha, Beta, Charlie, Delta) were: 94.7, 5, 0.3, and 0 (marginal integrity), 81.2, 18.8, 0, and 0 (marginal discoloration), 75.2, 24.8, 0, and 0 (anatomic form), and 95, 4.7, 0.3, and 0 (fracture), respectively. Marginal analysis showed 48.7% "continuous margin" initially and 17.7% at 12 months (difference statistically significant, P=0.05). The occlusal wear at 12 months was 10.0 microm (SD 11.6) for premolars and 22.0 microm (SD 24.1) for molars. Over the 12-month observation period, the Ormocer restorative was clinically effective in combination with a self-conditioning adhesive, and concern persists related to the marginal quality and retention of class V restorations.     

Direct versus indirect loading of orthodontic miniscrew implants—an FEM analysis

Objective

The mesialization of molars in the lower jaw represents a particularly demanding scenario for the quality of orthodontic anchorage. The use of miniscrew implants has proven particularly effective; whereby, these orthodontic implants are either directly loaded (direct anchorage) or employed indirectly to stabilize a dental anchorage block (indirect anchorage). The objective of this study was to analyze the biomechanical differences between direct and indirect anchorage and their effects on the primary stability of the miniscrew implants.

Materials and methods

For this purpose, several computer-aided design/computer-aided manufacturing (CAD-CAM)-models were prepared from the CT data of a 21-year-old patient, and these were combined with virtually constructed models of brackets, arches, and miniscrew implants. Based on this, four finite element method (FEM) models were generated by three-dimensional meshing. Material properties, boundary conditions, and the quality of applied forces (direction and magnitude) were defined. After solving the FEM equations, strain values were recorded at predefined measuring points. The calculations made using the FEM models with direct and indirect anchorage were statistically evaluated.

Results

The loading of the compact bone in the proximity of the miniscrew was clearly greater with direct than it was with indirect anchorage. The more anchor teeth were integrated into the anchoring block with indirect anchorage, the smaller was the peri-implant loading of the bone.

Conclusions

Indirect miniscrew anchorage is a reliable possibility to reduce the peri-implant loading of the bone and to reduce the risk of losing the miniscrew. The more teeth are integrated into the anchoring block, the higher is this protective effect.

Clinical relevance

In clinical situations requiring major orthodontic forces, it is better to choose an indirect anchorage in order to minimize the risk of losing the miniscrew.     

Digital evaluation of the reproducibility of implant scanbody fit—an in vitro study

Dental restorations are increasingly manufactured by CAD/CAM systems. Currently, there are two alternatives for digitizing dental implants: direct intra-oral data capturing or indirect from a master cast, both with transfer caps (scanbodies). The aim of this study was the evaluation of the fit of the scanbodies and their ability of reposition. At the site of the first molars and canines, implants were placed bilaterally in a polymer lower arch model (original model), and an impression was taken for fabricating a stone cast (stone model). Ten white-light scans were obtained from the original and the stone model with the scanbodies in place. The scanbodies were retrieved after each scan and re-attached to the same implant or lab analogue. The first scan of the series served as control in both groups. The subsequent nine scans and control were superimposed using inspection software to identify the discrepancies of the four scanbodies in both experimental groups. The systematic error of digitizing the models was 13 μm for the polymer and 5 μm for the stone model. The mean discrepancy of the scanbodies was 39 μm (±58 μm) on the original implants versus 11 μm (±17 μm) on the lab analogues. The difference in scanbody discrepancy between original implants and lab analogues was statistically significant (p < 0.05, Mann-Whitney U test). Scanbody discrepancy was higher on original implants than on lab analogues. Fit and reproducibility of the scanbodies on original implants should be improved to achieve higher accuracy of implant-supported CAD/CAM fabricated restorations.     

Combining midfacial degloving,LeFort-I osteotomy and inferiorly extended lateral orbitotomy (Krönlein) for removal of an orbital cavernous haemangioma: a new approach

Orbital tumours, located in the medial extraconal and intraconal compartment of the orbit, represent a challenge, with regard to surgical exposure. In the present paper removal of a cavernous haemangioma, located in the medial intraconal compartment was accomplished by combining lateral orbitotomy, midfacial degloving and LeFort-I osteotomy. Resection of the tumour could be performed under direct vision. Surgical exposure and removal of the lesion were obtained, without causing damage to surrounding tissues. Aesthetical results and postoperative eye function proved to be highly satisfactorily. With regard to limitations, concerning the combination of these methods, extended surgery duration and invasiveness have to be named. According to the technical feasibility and postoperative results, this new surgical approach represents a reliable and fully viable alternative method for the removal of medial orbital tumours.     

Endoscopic transmaxillary transMüller's muscle approach for decompression of superior orbital fissure: A cadaveric study with illustrative case

BackgroundIn an effort to avoid the damage and inconvenience associated with transcranial approaches, we developed an endoscopic transmaxillary transMüller's muscle approach for decompression of the superior orbital fissure (SOF).MethodsThe endoscopic transmaxillary transMüller's muscle route was performed in ten cadaveric heads. We measured important anatomic landmarks, and angles radiographically. This approach was initially attempted in one patient with traumatic superior orbital fissure syndrome (tSOFS).ResultsA maxillary antrostomy was carried out with a buccal sulcus incision. The sinus ostium and the course of infraorbital nerve were used as endoscopic anatomic landmarks. Then the inferior orbital fissure was drilled out, followed by separating the Müller's muscle. The periorbita were peeled off from the lateral wall, followed by the endoscope going along the periorbital space, until the lateral aspect of the SOF could be visualized. Decompression was successfully performed in all specimens. The initial clinical application justified this approach. The patient had an uneventful postoperative course and satisfactory recovery.ConclusionThis approach offers sufficient endoscopic visualization and reliable decompression of SOF. It avoids the need for brain retraction, temporalis muscle manipulation, or any external incision, and appears to be able to deliver satisfying aesthetic results as well as favourable functional recovery.     

Long-term evaluation of direct pulp capping—treatment outcomes over an average period of 6.1 years

To assess the treatment outcomes of direct pulp capping with calcium hydroxide, 248 teeth were examined 0.4–16.6 years (mean, 6.1 ± 4.4) after pulp capping. Only teeth diagnosed to be clinical healthy or with spontaneous pain were capped. The treatment outcome was assessed by interviewing for signs or symptoms responsiveness and sensibility testing with CO₂. The overall survival rate was 76.3% after 13.3 years. Of the teeth, 80.2% were found to have a favourable treatment outcome. The pulps of 60-year-old patients showed a significant lower favourable treatment outcome when compared to patients younger than 40 years (p < 0.05). The treatment outcome was significantly less favourable in teeth restored with glass ionomer cement compared to all other teeth (p < 0.01). The likelihood to show an unfavourable treatment outcome after direct pulp capping was significantly higher for teeth with spontaneous pain than for teeth with clinically healthy pulps (p < 0.001). In addition, the likelihood for a tooth to become non-vital after direct pulp capping was significantly higher within the first 5 years after treatment than after more than 5 years (p < 0.001) after treatment.     

Preforming of polydioxanone sheets for orbital wall fractures – A technical note

Introduction

Polydioxanone (PDS) sheets are commonly used in the treatment of orbital wall fractures. A potential drawback of PDS is that it may be difficult to adapt to the anatomy of the orbital walls. Therefore a study was conceived to test the feasibility of preforming PDS sheets.

Retrospective evaluation of the oral brush biopsy in daily dental routine — an effective way of early cancer detection

Clinical Oral Investigations - Oral brush biopsies are a well researched index for early detection of oral cancer in specialised centers. But the performance of the exfoliative biopsy is not yet...     

Suitability of ART approach for managing caries lesions in people with disability—Experts' opinion

Abstract

Objective. This study aimed to obtain the opinions of experts in Special Care Dentistry (SCD) regarding the suitability of the Atraumatic Restorative Treatment (ART) approach for the treatment of carious lesions in persons with disability. Material and methods. Thirty expert participants from around the world, joining the SCD Task Force meeting, Education Committee of the International Association of Disability and Oral Health (Antalya, Turkey, 2011), completed a questionnaire survey. Frequency distributions of variables were analysed using Chi-Square test for differences between variables. Results. All respondents reported having full or moderate knowledge of ART (23.3% and 63.3%, respectively) and 66.7% indicated that they felt the technique was useful for this population. However, only 50% of respondents used the technique regularly in their practice and five (16.7%) replied that they would never use it, even if a favourable evidence base for ART use in this population became available. The barriers to the introduction of ART to SCD are discussed and the need for training and further research highlighted. Conclusions. Barriers to the implementation of ART in practice were placement of the restoration under difficult conditions and the dentist's pre-conception of the technique as being ‘lower quality dentistry'. Experts suggested that some of these barriers might be overcome by improving the evidence base in favour of the technique, specifically in the population with disability.     

Accuracy of torque-limiting devices used for mini-implant placement—an in vitro study

Introduction

Mini-implants are used when enhanced orthodontic anchorage is needed. Documented risks include damage inflicted to tooth structures and implant loosening, but also fracture. An important factor in minimizing adverse side effects is to control the insertion torque. The goal of the present study was to investigate the accuracy of various torque-limiting devices available for this purpose.

Materials and methods

Eight torque-limiting devices were analyzed, including a group of manually-operated drivers (n=3), a group of battery-operated drivers (n=4), and a surgical unit (n=1). The accuracy of these devices was tested over the entire range of applicable torque levels, using an experimental design simulating the insertion of mini-implants.

Results

No significant differences were noted between the group of manually-operated and the group of battery-operated devices within the clinically relevant range of 10–25 Ncm. Comparing the individual devices revealed several significant differences. Some devices yielded both effective torque levels very close to the set levels and small standard deviations.

Conclusion

Mini-implants can be put in place in a controlled fashion regardless of whether the torque-limiting device used for this purpose is a manual- or battery-operated driver or a surgical unit. However, we observed that the accuracy of torque limitation differed greatly between individual devices across these groups. Our results can therefore help clinicians select an appropriate insertion device for mini-implants.     

A retrospective evaluation of the aesthetics of the nasolabial complex after unilateral cleft lip repair using the Tennison–Randall technique: A study of 44 cases treated in a single cleft center

IntroductionAmong numerous techniques that have been described for lip repair, the Tennison–Randall method has gained popularity over time and is preferred by many surgeons due to the predictability of the outcome. This study aims to evaluate the esthetic outcome reached in the nasolabial region following primary lip repair with the use of this method.Materials and methodsForty-four patients with unilateral cleft lip (with or without alveolar cleft) were assessed retrospectively through a photographic evaluation by two clinicians with regard to the aesthetics of the lip and nose separately as anatomical subunits as well as of the nasolabial region as an anatomical complex. The collected data were statistically analyzed with regard to the cleft subtype and the performance of corrective surgeries for the lip and/or the nose.ResultsThe method was associated with good results, especially when it comes to the appearance of the nose as an anatomical subunit, as well as of the nasolabial region as a complex, regarding cleft lip patients without an alveolar cleft.ConclusionThe Tennison–Randall technique proved to be a very satisfying method in terms of the esthetic long-term outcome in our patient collective.