Quantification of Trabecular Bone Structure Using Magnetic Resonance Imaging at 3 Tesla—Calibration Studies Using Microcomputed Tomography as a Standard of Reference

The purpose of this study is to use high-resolution magnetic resonance (MR) imaging at 3 Tesla (3T) to quantify trabecular bone structure in vitro using femoral head specimens, and to correlate the calculated structure measures with those that were determined using microcomputed tomography (microCT), the standard of reference. Fifteen cylindrical cores were obtained from fresh femoral heads after total hip arthroplasty. MR images were obtained at 3T using a transmit-receive wrist coil. High-resolution coronal images were acquired using a modified three-dimensional (3D) fast-gradient echo sequence. From these data sets two-dimensional (2D) structural parameters analogous to bone histomorphometry were derived by using both mean intercept length (MIL) methods based on the plate model and the more recent model-assumption free 3D distance-transformation (DT) methods. The parameters measured by the 2D plate model-based MIL method and the DT method included apparent (App). BV/TV (bone volume/total volume), App. Tb.Th (trabecular thickness), App. Tb.Sp (trabecular separation), and App. Tb.N (trabecular number). Identical regions of interest were analyzed in the MR images and the microCT data sets, and similar structure measures were derived. The means and standard deviations of the parameters over all slices were calculated and MR-derived measures were correlated with those derived from the microCT data sets using linear regression analyses. Structure measures were overestimated with MRI, for example, the mean App. BV/TV was 0.45 for MRI and 0.20 for microT, and the slope of the graph was 1.45. App. Tb.Th was overestimated by a factor of 1.9, whereas App. Tb.Sp was underestimated; Tb.N showed the smallest effect. Correlations between the individual parameters were excellent (App. BV/TV, r2 = 0.82; App. Tb.Sp, r2 = 0.84; App. Tb.N, r2 = 0.81), except for App.Tb.Th (r2 = 0.67). The results of this study show that trabecular bone structure measures may be obtained using 3T MR imaging. These measures, although higher than the standard of reference, show a highly significant correlation with true structure measures obtained by microCT.     

Side-to-side and within-side variability of 3D bone microarchitecture by conventional micro-computed tomography of paired iliac crest biopsies

Bone microarchitecture in osteoporosis can be characterized by examining iliac bone biopsies and treatment effects assessed by comparing a baseline biopsy from one side to a posttreatment biopsy from the other side, a method that assumes limited side-to-side variability. New techniques based on micro-computed tomography (microCT) provide information on the three-dimensional (3D) microarchitecture of bone. We used microCT to measure side-to-side and within-side variability of 3D microarchitectural parameters of trabecular and cortical bone in paired iliac-crest biopsies, one from each side. A Bordier needle trephine was used to collect biopsies from 30 postmenopausal female cadavers (mean age, 73.7+/-10.7 years; range, 55-96 years). Biopsies were chemically defatted then imaged using a desktop microCT scanner (voxel size, 10.77 microm). Parameters measured in trabecular bone consisted of bone volume/tissue volume (BV/TV, %), direct trabecular thickness and trabecular spacing (Tb.Th and Tb.Sp, microm) using the sphere method, bone surface/bone volume (BS/BV, mm(-1)), trabecular number (Tb.N, mm(-1)), structure model index (SMI), trabecular pattern factor (Tb.Pf), and degree of anisotropy (DA). In cortical bone, we measured cortical thickness (Cort.Th), porosity (Cort.Porosity), and pore diameter (Po.Dm). For trabecular bone parameters, reproducibility as assessed from two microCT acquisitions ranged from 4.1% to 6.9%. To assess side-to-side variability, we matched the volumes of interest selected in the right and left iliac crests. The mean difference in absolute individual percent variation (mAbsDelta(ind)) between the two sides ranged from 10.8% to 14.8% for all trabecular parameters except Tb.Pf (74%) and SMI (84%). In cortical bone, mAbsDelta(ind) were 11.6% for Po.Dm, 15.1% for Cort.Porosity, and 27.6% for Cort.Th. To assess within-side variability, we divided the trabecular iliac crest volume into three equal parts, one adjacent to each cortex and one in the middle. Values of mAbsDelta(ind) versus the middle part were ranging from 7.6% for Tb.Sp to 26.2% for BV/TV. Thus, within-side variability was similar in magnitude to side-to-side variability. The considerable differences in robustness across trabecular parameters indicate a need for selecting the most stable parameters, most notably for longitudinal studies of small numbers of patients. Acquisition by microCT and image analysis must comply with stringent quality criteria, especially the distance from the cortices must be standardized.     

Predicting human vertebral bone strength by vertebral static histomorphometry

The study investigates the relationship between static histomorphometry and bone strength of human lumbar vertebral bone. The ability of vertebral histomorphometry to predict vertebral bone strength was compared with that of vertebral densitometry, and also with histomorphometry and bone strength of iliac crest bone biopsies. The material comprised matched sets of second lumbar vertebrae, third lumbar vertebrae, and two iliac crest bone biopsies from each of 21 women (19--96 years) and 24 men (23--95 years). One of the iliac crest biopsies and 9-mm-thick mediolateral slices of half of each of the entire vertebral bodies (L-2) were used for histomorphometry. The other iliac crest biopsies and the L-3 were destructively tested by compression. High correlation was found between BV/TV or Tb.Sp and vertebral bone strength (absolute value of r = 0.86 in both cases). Addition of Tb.Th significantly improved the correlation between BV/TV and bone strength, and the addition of bone space star volume significantly improved the correlation between Tb.Sp and bone strength (from absolute value of r = 0.86 to absolute value of r = 0.89 in both cases). Bone structure (connectivity density) was not capable of improving the prediction of bone strength of the vertebral body. The correlations between BV/TV of L-2 and bone strength of L-3 were comparable with the correlation obtained by quantitative computed tomography (QCT), peripheral QCT (pQCT), and dual-energy X-ray absorptrometry (DEXA) of L-3 and bone strength of L-3. The iliac crest was found to have low predictive power of vertebral bone strength (iliac BV/TV: r = 0.62; iliac bone strength: r = 0.67). No gender-related differences were found in any of the relationships. It was shown that trabecular bone volume BV/TV and mean trabecular plate separation Tb.Sp are good predictors of vertebral bone strength. The ability of histomorphometry to predict vertebral bone strength was comparable to that of densitometry. Bone structure assessed by connectivity density did not improve the correlation between static histomorphometric measures and vertebral bone strength. No gender-related differences were found in any of the relationships. Neither static histomorphometry nor biomechanical testing of iliac crest bone biopsies is a good predictor of vertebral bone strength.     

Brazilian normal static bone histomorphometry: effects of age,sex, and race

Bone histomorphometry values for normal individuals within different populations have been well established. We studied iliac crest bone samples from 125 healthy Brazilian subjects. The effect of sex, race, and age variables on histomorphometric parameters was evaluated. Bone volume showed a trend to decrease with age in both sexes, being significantly higher in black females and Caucasian males. Interactions among sex, race, and age had no effect on trabecular thickness (Tb.Th) and trabecular separation (Tb.Sp). However, age had a significant effect on Tb.Th and Tb.Sp, and sex had an impact on Tb.Sp. Trabecular number (Tb.N) was higher in black females than in males and was higher in Asian males than in females. Among females, Tb.N was lower in Asians than in other races and was higher in blacks than in Caucasians and or in those of mulattos. In addition, Tb.N was higher in males under 10 than in males over 50 years old, was higher in females under 10 than in females in any other age bracket, and was lower in females in the 41–50 age bracket than in younger females. Osteoid volume and osteoid surface were significantly higher in males than in females, and a significant age-related difference in osteoid thickness was observed. No significant sex-related or race-related differences were found in terms of resorption, although eroded surface decreased with age. In conclusion, sex, race, and age, as well as interactions among these three variables, were found to affect some static histomorphometric indexes in healthy Brazilian subjects.     

A Morphometric Comparison of Trabecular Structure of Human Ilium Between Microcomputed Tomography and Conventional Histomorphometry

Recently, an imaging technique using microcomputed tomography (micro-CT) has emerged as a method for nondestructively assessing the microarchitecture of unprocessed surgical bone biopsy specimens. Using micro-CT, two-dimensional (2D) axial images were obtained from undecalcified transiliac bone biopsies which were taken from 15 patients with various metabolic bone diseases. Total area, bone area, and bone perimeter were determined, from which the bone volume (BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), and trabecular separation (Tb.Sp) were calculated semiautomatically and instantaneously. To evaluate the validity of this technique as a useful tool, the results were compared with those obtained from conventional histomorphometry. There were significant correlations between the two techniques for all parameters, with correlation coefficients ranging from 0.759 (Tb.N, P < 0.005) to 0.949 (BV/TV, P < 0.0001). Different resolutions seem to lead to major differences in perimeter values measured by the two methods. These factors may explain why the correlation coefficients of Tb.N and Tb.Th estimated from the perimeter and area is lower than that of BV/TV. Our results show that the micro-CT based on 2D images is a useful tool for imaging and nondestructively quantifying the microarchitecture of trabecular bone in unprocessed surgical bone specimens.     

Static histomorphometry of human iliac crest and vertebral trabecular bone: a comparative study.

We recently developed a new, rapid method for conducting static histomorphometry on large histologic sections. This method has now been applied on both iliac crest and lumbar vertebral bone to compare the age-related changes at these two skeletal sites and to investigate the correlation between the histomorphometric measures at the iliac crest and the vertebral body. The material comprised matched sets of unilateral transiliac crest bone biopsies and lumbar vertebral bodies (L-2) from 24 women (19-96 years) and 24 men (23-95 years) selected from a larger autopsy material. Three female subjects (80, 88, and 90 years) had a known vertebral fracture of L-2. The iliac crest biopsies and 9-mm-thick mediolateral slices of half the entire vertebral bodies were embedded in methylmetacrylate, stained with aniline blue, and scanned into a computer with a flatbed image scanner at a high resolution. With a custom-made computer program the following static histomorphometric measures were determined: trabecular bone volume; marrow and bone space star volume; node-strut analysis; trabecular bone pattern factor; trabecular thickness; trabecular number; trabecular separation; and anisotropy of bone and marrow phase. In addition, connectivity density was measured (ConnEulor method). The results showed that the age-related changes in the static histomorphometric measures are generally similar in the iliac crest and the vertebral body, and that these age-related changes are independent of gender. An exception, however, is connectivity density, where the age-related changes are similar for women and men in the vertebral body but significantly different in the iliac crest. Furthermore, the results showed that the histomorphometric measures were weakly intercorrelated between the iliac crest and the vertebral body, despite the generally similar pattern in age-related changes at these two skeletal sites. The highest correlation coefficient was found for trabecular separation (Tb.Sp; r = 0.63). Trabecular bone volume showed a correlation coefficient of r = 0.59. It is concluded that static histomorphometry performed on one skeletal site does not automatically predict static histomorphometric measures at another skeletal site. Therefore, it is recommended that static histomorphometry be performed at the skeletal site of interest-if at all possible.     

Interindividual and intraspecimen variability of 3-D bone microarchitectural parameters in iliac crest biopsies imaged by conventional micro-computed tomography

Bone microarchitecture of the iliac bone is used to characterize the properties of bone tissue in osteoporosis, particularly in pharmacological studies. Trabecular bone is known to be heterogeneous media. For a few years, the analysis of three-dimensional (3-D) bone microarchitecture has been based on micro-computed tomography (micro-CT). To assess the interindividual variability (inter-indVar) and the intrasample variability (intra-sampVar) of iliac crest biopsies, we used a Bordier needle trephine in 35 postmenopausal female cadavers (mean age, 74.4 +/- 10.4 years). Finally, we had at our disposal 32 individual iliac crests to assess the inter-indVar and 21 oriented specimens to assess the intra-sampVar. All the samples were chemically defatted, and the images were performed with a desktop micro-CT with a voxel size of 10.77 mum. We measured trabecular bone parameters: bone volume/tissue volume (BV/TV %), trabecular thickness and spacing (Tb. Th*, Tb.Sp* mum), bone surface/bone volume (BS/BV, 1/mm), the trabecular number (Tb.N, 1/mm), structure model index (SMI), trabecular pattern factor (Tb.Pf), and degree of anisotropy (DA). We also measured cortical bone parameters: cortical thickness (Cort.Th), porosity (PoV/TV), and pore diameter (Po.Dm). For the inter-indVar, we analyzed a fixed volume of interest corresponding to 119.8 mm(3) centered on each iliac crest. To assess the intra-sampVar, we divided the whole trabecular volume into three equal height parts (external, middle, internal). BV/TV, Tb.N, and PoV/TV were negatively correlated with age and Tb.Sp* and SMI were positively correlated. The mean difference of absolute individual variations in percentage with the middle area used as a reference, comparatively to external and internal areas, ranged from 6.6% (Tb.Sp*) to 27.8% (BV/TV), except Tb.Pf, which showed large variability. There was no difference between external and internal areas, with a tendency for lower values of BV/TV, Tb.Th*, and Tb.N in the middle of the iliac crest and higher values of Tb.Sp* and BS/BV. The evaluation of bone microarchitecture of iliac crest samples on micro-CT images is reliable. The heterogeneity of bone inside the iliac crest is noticeable as leading to analyzing the largest possible quantity of bone, with standardized location, according to cortex but without any assumption of orientation.     

High‐resolution peripheral quantitative computed tomography can assess microstructural and mechanical properties of human distal tibial bone

High‐resolution peripheral quantitative computed tomography (HR‐pQCT) is a newly developed in vivo clinical imaging modality. It can assess the 3D microstructure of cortical and trabecular bone at the distal radius and tibia and is suitable as an input for microstructural finite element (µFE) analysis to evaluate bone's mechanical competence. In order for microstructural and image‐based µFE analyses to become standard clinical tools, validation with a current gold standard, namely, high‐resolution micro‐computed tomography (µCT), is required. Microstructural measurements of 19 human cadaveric distal tibiae were performed for the registered HR‐pQCT and µCT images, respectively. Next, whole bone stiffness, trabecular bone stiffness, and elastic moduli of cubic subvolumes of trabecular bone in both HR‐pQCT and µCT images were determined by µFE analysis. The standard HR‐pQCT patient protocol measurements, derived bone volume fraction (BV/TV^d), trabecular number (Tb.N*), trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and cortical thickness (Ct.Th), as well as the voxel‐based direct measurements, BV/TV, Tb.N*, Tb.Th*, Tb.Sp*, Ct.Th, bone surface‐to‐volume ratio (BS/BV), structure model index (SMI), and connectivity density (Conn.D), correlated well with their respective gold standards, and both contributed to µFE‐predicted mechanical properties in either single or multiple linear regressions. The mechanical measurements, although overestimated by HR‐pQCT, correlated highly with their gold standards. Moreover, elastic moduli of cubic subvolumes of trabecular bone predicted whole bone or trabecular bone stiffness in distal tibia. We conclude that microstructural measurements and mechanical parameters of distal tibia can be efficiently derived from HR‐pQCT images and provide additional information regarding bone fragility. © 2010 American Society for Bone and Mineral Research     

Trabecular architecture in iliac crest bone biopsies: infra-individual variability in structural parameters and changes with age

A histomorphometric study was conducted on bilateral iliac crest samples obtained at autopsy from 27 subjects who had died suddenly. Six parameters related to cancellous bone structure were measured: bone volume (BV/TV), surface density (BS/TV), surface/volume ratio (BS/BV), trabecular thickness (Tb.Th.), trabecular number (Tb.N), and trabecular separation (Tb.Sp). There were no significant differences between right and left sides in the mean values for each parameter. However, when subjects were considered individually, there was a substantial difference in the majority of cases for all parameters. The intra-individual variation (IIV) was calculated for each subject as the percentage deviation from the mean for the two sides. There was a wide range in IIV (0.05-30.27%) with a mean value of approximately 11.5% for each parameter. In males the mean IIV ranged from 9 to 11% and from 14 to 16% in females. The IIV in BV/TV was positively correlated with age. Data generated on a subsample of 15 males were used to predict patient group sizes required to detect minimum significant differences in studies involving repeat biopsies. Sample sizes of 32, 16, and 8 patients would be required for relative increments in BV/TV of 29, 36, and 46%, respectively, to be statistically significant. Tb.Sp increased significantly with age but there was no significant change in Tb.Th. This supports the view that bone loss with aging occurs primarily through a mechanism involving complete disappearance of individual trabecular plates.     

Long-term effects of withdrawal of bisphosphonate incadronate disodium (YM175) on bone mineral density, mass, structure, and turnover in the lumbar vertebrae of ovariectomized rats.

This study was designed to evaluate the long-term effects of incadronate disodium (YM175) after its withdrawal on cancellous bone mass in ovariectomized (OVX) rats. Thirteen-week-old female SD rats were randomized into four groups: sham-operated, OVX, low-YM, and high-YM (0.01 mg/kg or 0.1 mg/kg subcutaneously [sc], three times a week after OVX) groups. After 4 weeks of treatment with vehicle or YM175, rats from each group were killed at time points of 0 (baseline), 3, 6, 9, and 12 months after withdrawal of the agent. Bone mineral density (BMD) of the lumbar vertebrae was measured by dual-energy X-ray absorptiometry (DXA). Bone volume (BV/TV), trabecular number and trabecular separation (Tb.N and Tb.Sp), eroded surface (ES/BS), osteoclast number and osteoclast surface (N.Oc/BS and Oc.S/BS), osteoid surface (OS/BS), and bone formation rate (BFR/BS) were measured as histomorphometric parameters of the fifth lumbar vertebra. BMD, BV/TV, Tb.N, and Tb.Sp in YM175-treated groups were maintained at the same level as in the sham group until 12 months after withdrawal in the high-YM group and until 3 months after withdrawal in the low-YM group. YM175 decreased both bone formative and resorptive parameters in histomorphometry. Serum bone-specific alkaline phosphatase (ALP) and urinary deoxypyridinoline at both doses of YM175 also showed a suppressive effect of this agent on bone turnover. These results indicate that YM175, after withdrawal, still maintains bone volume dose dependently by depressing bone resorption and formation in OVX rats. Intermittent YM175 treatment with a long interval may be sufficient to maintain the bone volume and structure in OVX rats.     

Relationships between bone structure in the iliac crest and bone structure and strength in the lumbar spine

The purpose of this study was to examine the relationship between histomorphometric variables of cancellous bone structure and ultimate compressive strength (UCS) in the second lumbar vertebra (L2) and to determine whether structural variables in the iliac crest are predictive of the same variables and of UCS in L2. At autopsy, 7.5 mm diameter cores were removed from the iliac crest and from L2 of 29 subjects who had died suddenly without bone disease. Cancellous bone volume (BV/TV, %) was significantly lower in L2 than in iliac crest due to lower trabecular number (Tb.N, per mm) and thickness (Tb.Th, µm). There were significant correlations between iliac crest and L2 for BV/TV, Tb.N and trabecular separation (Tb.Sp, µm), but not for Tb.Th. BV/TV was negatively correlated, and Tb.Sp was positively correlated with age at both sites. Tb.Th was not significantly correlated with age in the iliac crest, but a significant negative correlation was observed in L2. The UCS of vertebral cores was negatively correlated with age. BV/TV and Tb.Th in L2 were positively correlated with UCS in L2. Cortical width and BV/TV in iliac crest were positively correlated with UCS in L2. We conclude that: (1) cancellous bone volume in the iliac crest is higher than in the lumbar spine due to thicker, more closely spaced trabecular plates, (2) the changes in structural variables with age are generally similar in the iliac crest and lumbar vertebra, but trabecular thinning with age is more evident in the spine than in the ilium, and (3) the compressive strength of cancellous bone in the lumbar spine is correlated with histomorphometric variables of bone structure, as measured both in the lumbar spine and in the iliac crest.     

Relationship between compressive properties of human os calcis cancellous bone and microarchitecture assessed from 2D and 3D synchrotron microtomography

The aim of this study was to determine the contribution of 2D and 3D microarchitectural characteristics in the assessment of the mechanical strength of os calcis cancellous bone. A sample of cancellous bone was removed in a medio-lateral direction from the posterior body of calcaneus, taken at autopsy in 17 subjects aged 61-91 years. The sample was first used for the assessment of morphological parameters from 2D morphometry and 3D synchrotron microtomography (microCT) (spatial resolution=10 microm). The 2D morphometry was obtained from three slices extracted from the 3D microCT images. Very good concordance was shown between 3D microCT slices and the corresponding physical histologic slices. In 2D, the standard histomorphometric parameters, fractal dimension, mean intercept length, and connectivity were computed. In 3D, histomorphometric parameters were computed using both the 3D mean intercept length method and model-independent techniques. The 3D fractal dimension and the 3D connectivity, assessed by Euler density, were also evaluated. The cubic samples were subjected to elastic compressive tests in three orthogonal directions (X, Y, Z) close to the main natural trabecular network directions. A test was performed until collapse of trabecular network in the main direction (Z). The mechanical properties were significantly correlated to most morphological parameters resulting from 2D and 3D analysis. In 2D, the correlation between the mechanical strength and bone volume/tissue volume was not significantly improved by adding structural parameters or connectivity parameter (nodes number/tissue volume). In 3D, one architectural parameter (the trabecular thickness, Tb.Th) permitted to improve the estimation of the compressive strength from the bone volume/tissue volume alone. However, this improvement was minor since the correlation with the BV/TV alone was high (r=0.96). In conclusion, which is in agreement with the statistic's rules, we found, in this study, that the determination of the os calcis bone compressive strength using the 3D bone volume fraction cannot be improved by adding 3D architectural parameters.     

Predictive value of bone mineral density and morphology determined by peripheral quantitative computed tomography for cancellous bone strength of the proximal femur

Peripheral quantitative computed tomography (pQCT) is an established diagnostic method for assessment of bone mineral density in the diagnosis of osteoporosis. However, the capacity of structural parameters of cancellous bone measured by high-resolution computed tomography remains to be explored. In 33 patients, bone mineral density (BMD) of the proximal femur was measured in vitro by pQCT using cylindrical biopsies from the intertrochanteric region harvested before the implantation of an artificial hip joint. By digital image analysis of CT scans, parameters derived from histomorphometry describing the microarchitecture of cancellous bone were measured. The biopsies were also loaded to failure by an uniaxial compression test to determine the biomechanical parameters, Young's modulus, strength, and maximum energy absorption (E(max)). Strong correlations were found for BMD vs. mechanical parameters (r = 0.73 for Young's modulus, r = 0.82 for strength, and r = 0.79 for E(max); p < 0.001, n = 29). The morphological parameters, bone volume per trabecular volume (BV/TV), apparent trabecular thickness (app.Tb.Th), apparent trabecular separation (app.Tb.Sp), and trabecular number (Tb.N), correlated significantly with all mechanical parameters. The combination of morphological parameters with BMD in a multivariate regression model led to an overall, but only moderate, increase in R(2) in all cases. Our data confirm the high predictive value of BMD for the mechanical competence of cancellous bone of the intertrochanteric region. However, quantification of cancellous bone structure by image analysis of CT scans may provide additional qualitative information for the analysis of bone strength.     

Preserved three-dimensional cancellous bone structure in mild primary hyperparathyroidism

By conventional 2-dimensional, histomorphometric analysis, we and others have previously shown that cancellous bone architecture is preserved in mild primary hyperparathyroidism (PHPT). We have now extended these observations to a 3-dimensional analysis using microcomputed tomography (microCT). Iliac crest bone biopsies were analyzed from the following subjects with PHPT: 22 postmenopausal women; 7 premenopausal women; similar numbers of normal pre- and postmenopausal women served as controls. Fifteen men with PHPT were also studied. Postmenopausal women with PHPT demonstrated features of preserved cancellous bone as shown by smaller age-related declines in cancellous bone volume (BV/TV) and connectivity density (Conn.D) and no change in bone surface/total volume (BS/TV) as compared to normal women. In postmenopausal women with PHPT, cancellous bone volume (BV/TV), bone surface/total volume, and connectivity density (Conn.D) were all higher, and trabecular separation (Tb.Sp) was lower than in postmenopausal controls. In sharp contrast to the findings in normal women, no structural variables in PHPT women were correlated with age. Also of note, there was no difference in any 3-dimensional index between women and men with PHPT. We conclude that three-dimensional, cancellous bone microarchitecture is preserved in patients with mild primary hyperparathyroidism.     

Patient-specific microarchitecture of vertebral cancellous bone: a peripheral quantitative computed tomographic and histological study

This study directly compares peripheral quantitative computed tomography (pQCT) and histology for the assessment of 11 morphological parameters. Sixty-eight cylindrical cancellous bone samples were cored from the thoracic (T-9) thoracolumbar (T-12 or L-1), and lumbar (L-4) vertebral bodies of nine autopsy subjects (aged 44–88 years). Four transverse slices were acquired by pQCT from the bottom to the top of each cylinder. Slice thickness was 300 μm and pixel size was 70 × 70 μm. Thin sections (5 μm) were obtained at the same location in the samples, stained with Von Kossa, and photographed. Classical morphological parameters and strut analysis parameters were measured on all images (272 pQCT and 272 matched histological sections). Because of the partial volume effect and specific thresholding procedure, pQCT overestimated the absolute value of the bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) by a factor 2. The trabecular number (Tb.N), trabecular spacing (Tb.Sp), and total strut length (TSL) were correctly estimated. However, the direct correlation between pQCT and histology was excellent (r² > 0.85, p < 0.001) for BV/TV, Tb.N, Tb.Sp, TSL, and star surface. For Tb.Th, number of nodes, and number of free ends, the correlation was also good (r² > 0.6, p < 0.001). Using a random regression model, we also explored the ability of these parameters to add structural information to the readily available BV/TV or apparent density. The model identified significant (p < 0.001) differences between subjects. For a given BV/TV, some patients had more trabeculae (Tb.N) that were thinner (Tb.Th) and more disconnected (higher free ends and star). This was observed for both histology and pQCT morphometrical data. Our analysis demonstrates the capacity of both histology and pQCT to detect subjects with specific structural patterns in vertebral cancellous bone.     

Age-and region-dependent changes in three-dimensional microstructural properties of proximal femoral trabeculae

Summary  This study investigated regional variations in the 3D microstructure of trabecular bone in human proximal femur, with respect to aging. The results demonstrate that age-related changes in trabecular microstructure significantly varied from different sub-regions of the proximal femur. Introduction  We hypothesize that the age-related changes in trabecular bone microstructure appear to be varied from specific anatomic sub-regions of the proximal femur followed by non-uniform bone loss. The purpose of this study was therefore to explore regional variations in the 3D microstructure of trabecular bone in human proximal femur, with respect to aging. Methods  A total of 162 trabecular bone cores from six regions of 27 femora of male cadaver donors were scanned using micro-computed tomography (micro-CT). The following microstructural parameters were calculated: bone volume fraction (BV/TV), trabecular number (Tb.N), thickness (Tb.Th) and separation (Tb.Sp), structure model index (SMI), and degree of anisotropy (DOA). Results  Age-related changes in trabecular microstructure varied from different regions of the proximal femur. There was a significant decrease in bone volume fraction and an almost identical decrease in trabecular thickness associated with aging at any region. Regional analysis demonstrated a significant difference in BV/TV, Tb.Th, Tb.Sp, Tb.N and DOA between superior and inferior neck, as well as a significant difference in BV/TV, Tb.Sp, Tb.N, SMI and DOA between superior and inferior trochanter. Conclusions  Age-related changes in bone loss and trabecular microstructure within the male proximal femur are not uniform in this cadaveric population.