Structure and Properties of Poly(butyl acrylate‐block‐sulfone‐block‐butyl acrylate) Triblock Copolymers Prepared by ATRP

Summary: A series of telechelic OH polysulfones (PSU) were converted to atom transfer radical polymerization (ATRP) macroinitiators by reaction with 2‐bromoisobutyryl bromide. Three macroinitiators with different chain lengths were extended with poly(butyl acrylate) (PBA) to form ABA triblock copolymers. The structure and dynamics of the ABA triblock copolymers with PSU central segments and various molecular weight PBA side chains were investigated by small‐angle X‐ray scattering and rheology. The block copolymers form micelles with a PSU core and PBA corona. The length of each block has an important effect on the structure and resulting dynamics of the copolymers. Dynamic mechanical measurements indicate three relaxation modes: (i) PBA segmental relaxation at high frequency; (ii) PBA relaxation of the corona block at intermediate frequency; (iii) an additional relaxation process related to structural rearrangement of the micelles at low frequency. The shear modulus plateau corresponding to a soft rubbery state extends over a very broad time or temperature range because of this slow additional relaxation.

Schematic illustration of the structural elements and the bulk supramolecular structure for a symmetric triblock copolymer with a stiff central segment strongly incompatible with the other constituent.     

Atom Transfer Radical Polymerization of Solketal Acrylate Using Cyclohexanone as the Solvent

Summary: Solketal acrylate (SA) was homopolymerized by atom transfer radical polymerization (ATRP) using CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst and cyclohexanone as the solvent with controlled molecular weights and low polydispersities. The prepared bromine‐terminated homopolymers, PSA, were used as macroinitiators to initiate polymerization of tert‐butyl acrylate (tBA) under similar ATRP conditions to produce diblock copolymers, PSA‐b‐PtBA, with controlled molecular weights and low polydispersities. ATRP of SA using bromine‐terminated PtBA as the macroinitiator was also carried out and diblock copolymers, PtBA‐b‐PSA, were obtained. The PSA block was selectively hydrolyzed by stirring for 3 h in 6 N HCl/THF (1/9, v/v) at room temperature to form a poly(glycerol monoacrylate) block. Both blocks of PSA and PtBA were hydrolyzed by stirring in anhydrous trifluoroacetic acid (TFA)/dichloromethane for 4 h, then adding water to the system and stirring for another 3 h to form corresponding diblock copolymers of glycerol monoacrylate and acrylic acid.

Kinetic plot for the atom transfer radical polymerization of solketal acrylate at 90 °C.     

Self‐Assembly of Carbon Nanotubes Modified by Amphiphilic Block Polymers in Selective Solvent

Block copolymers of polystyrene and poly(tert‐butyl methyacrylate) were prepared by ATRP. Halogen atoms at the chain ends were transformed into azide groups to obtain  N₃ terminated block copolymers, which were connected to the surface of multi‐walled carbon nanotubes (MWNTs) by reacting  N₃ with MWNT's surface. Amphiphilic diblock copolymer modified MWNTs were obtained after PtBMA blocks were hydrolyzed to polymethyacrylic acid (PMAA). Results showed that the amphiphilic diblock copolymer was grafted onto MWNTs by covalent bonds. TEM showed that they formed self‐assembly structures by hydrophilic/hydrophobic interaction in good solvents. As the block length of PMAA increased, the self‐assembly structures of amphiphilic MWNTs became increasingly ordered and uniform.

     

Synthesis and Characterization of Amphiphilic Poly(ethylene oxide)‐block‐poly(hexyl methacrylate) Copolymers

We describe the preparation of amphiphilic diblock copolymers made of poly(ethylene oxide) (PEO) and poly(hexyl methacrylate) (PHMA) synthesized by anionic polymerization of ethylene oxide and subsequent atom transfer radical polymerization (ATRP) of hexyl methacrylate (HMA). The first block, PEO, is prepared by anionic polymerization of ethylene oxide in tetrahydrofuran. End capping is achieved by treatment of living PEO chain ends with 2‐bromoisobutyryl bromide to yield a macroinitiator for ATRP. The second block is added by polymerization of HMA, using the PEO macroinitiator in the presence of dibromobis(triphenylphosphine) nickel(II), NiBr₂(PPh₃)₂, as the catalyst. Kinetics studies reveal absence of termination consistent with controlled polymerization of HMA. GPC data show low polydispersities of the corresponding diblock copolymers. The microdomain structure of selected PEO‐block‐PHMA block copolymers is investigated by small angle X‐ray scattering experiments, revealing behavior expected from known diblock copolymer phase diagrams.

SAXS diffractograms of PEO‐block‐PHMA diblock copolymers with 16, 44, 68 wt.‐% PEO showing spherical (A), cylindrical (B), and lamellae (C) morphologies, respectively.     

Synthesis and characterization of poly(ethylene oxide) and poly(perfluorohexylethyl methacrylate) containing triblock copolymers

A new series of poly(perfluorohexylethyl methacrylate)‐block‐poly(ethylene oxide)‐block‐poly(perfluorohexylethyl methacrylate), PFMA‐b‐PEO‐b‐PFMA triblock copolymers has been synthesized by atom transfer radical polymerization using bifunctional PEO macroinitiators. The molecular structure of the block copolymers was confirmed by ¹H NMR spectroscopy and SEC. X‐ray scattering studies have been carried out to investigate their bulk properties. SAXS has shown cubic arrangement of spheres (bcc), hexagonally packed cylinders (hpc) and lamellar microdomain formation in the melt of triblock copolymers investigated, depending on composition. Crystallization was, however, found to destroy the ordered melt morphology and imposes a lamellar crystalline structure. WAXS, DSC and polarized light microscopy measurements confirmed the crystallization of PEO segments in block copolymers. Long PFMA blocks were found to have significant effect on PEO crystallization.

Synthesis of triblock copolymers of EO and FMA by ATRP.     

Synthesis,Characterization, and Thermal Properties of Block Copolymers Containing Poly(styrene‐co‐4‐vinylpyridine) and Poly(styrene‐co‐butyl acrylate) by Controlled Radical Polymerization

Radical polymerization of styrene and mixtures of styrene and 4‐vinylpyridine was performed in the presence of 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) producing polymers with controlled molecular weights and molecular weight distributions. The living nature of these polymers was confirmed by using them as macroinitiators in the block copolymerization of styrene and butyl acrylate. The thermal properties of the synthesized statistical diblock copolymers measured by differential scanning calorimetry indicated that a phase‐separated morphology was exhibited in most of the block copolymers. The results were confirmed by transmission electron microscopy (TEM) and small angle X‐ray scattering (SAXS) showing microphase‐separated morphology as is known for homo A‐B diblock polymers.

SAXS of a block copolymer synthesized from S/V 70:30 macroinitiators (03) with one detected T_g.     

Synthesis and Characterization of Semicrystalline Polyethylene‐graft‐Poly(acrylic acid) Copolymers

Hydrophilic polyolefin materials were prepared by grafting tBA from PE macroinitiators bearing functionalized norbornene units capable of initiating an ATRP. This method produced semicrystalline graft copolymers (PE‐graft‐PtBA) with narrow molecular weight distributions (1.2–1.4) and tunable tBA content (2–21 mol‐%). Incorporation of tBA resulted in a decrease in crystallinity, but little change in the melting point of the products. Subsequently, the tBA moieties were converted into acrylic acid units through chemical and thermal means to generate PE‐graft‐PAA copolymers. The increased hydrophilicity of the resulting materials was verified by ATR‐IR, solid‐state ¹³C NMR spectroscopy, contact angle measurements, and TGA.

     

Block Copolymers Build‐up of Electron and Hole Transport Materials

Summary: In this article we describe the synthesis of various monomers modified with triphenyl‐1,3,5‐triazine side groups as electron transport moieties. By nitroxide‐mediated polymerization with a TEMPO unimer it was possible to obtain polymers with a narrow polydispersity. Furthermore, by living radical polymerization block copolymers were obtained from these monomers. Therefore, microphase separated structures are accessible which possess hole conducting moieties in one phase and electron conducting moieties in the other phase.

General build‐up of the copolymers consisting of hole and electron conductor.     

Block Copolymers of Vinyl Ethers as Thermo‐Responsive Colloidal Stabilizers of Organic Pigments in Aqueous Media

Summary: The colloidal stability of the aqueous dispersions of hydrophobic organic pigments, CuPc and carbon black, stabilized by a wide range of polymer structures based on alkyl vinyl ethers was studied. It was shown that, unlike the homopolymers and the random copolymers, the amphiphilic AB, ABA and BAB block copolymers of MVE with IBVE or ODVE show stabilizing activities that depend on their hydrophilic/hydrophobic balance and polymer architecture. After optimization, the colloidal stabilization is competitive with commercial PEO‐PPO block copolymers (Pluronic®). It was found that the sedimentation of the dispersions was much faster at a higher temperature, above the LCST of the PMVE‐blocks. The loss of the stabilizing activity of the block copolymers correlates with an increase of the hydrophobicity of the treated pigment surface. These properties enable the creation of colloidal dispersions with stabilities that can be tuned as a function of temperature.

Poly(methyl vinyl ether) ABA and BAB block copolymers as colloidal stabilizers of organic pigments.     

Diblock Copolymers with Azobenzene Side‐Groups and Polystyrene Matrix: Synthesis,Characterization and Photoaddressing

Summary: Diblock copolymers with a photoaddressable dispersed phase containing p‐methoxy substituted azobenzene side groups and a polystyrene matrix were synthesized and characterized. The block copolymers were prepared by a sequential living anionic polymerization of butadiene and styrene. The poly(1,2‐butadiene) segment was hydroborated and the hydroxy‐functions converted by a polymeranalogous reaction with the azo chromophore as side groups. The block copolymers were synthesized with different compositions by varying the length of the polystyrene segment and the length of the functionalized segment in order to obtain different morphologies. In this paper, for the first time a comparison of the cis‐trans photo‐isomerization behavior and photoaddressing with respect to different morphologies of the block copolymers is presented. To complete the comparison, the corresponding homopolymer and a statistical copolymer were also synthesized and investigated. A different photoaddressing behavior between homopolymer, statistical copolymer and the block copolymers was observed. One principal difference and advantage for photo addressable block copolymers is the lack of a formation of surface gratings which occurs in homopolymers and statistical copolymers.

TEM of a poly(1,2‐butadiene)‐block‐polystyrene copolymer containing azobenzene side‐groups.     

Application of Nitroxide‐Terminated Polymers Prepared by Sonochemical Degradation in the Synthesis of Block Copolymers

Summary: The ultrasonic irradiation of a polymer solution results in the breakage of macromolecular C? C bonds. In the presence of radical scavengers the formed macroradicals are prevented from termination reactions as combination or disproportionation. Using nitroxides as trapping agents the polymer is transformed into a macroinitiator, which can be used in controlled free‐radical polymerization to synthesize block copolymers. In this work several polymers were exposed to sonochemical degradation and terminated with various nitroxides, e.g. OH‐TEMPO and TIPNO. In a second reaction step the prepared polymer‐nitroxide‐adducts were applied as macroinitiators in controlled free‐radical polymerizations with styrene. The obtained products were mixtures of block copolymer and the corresponding homopolymers. The visco‐elastic properties were investigated by rheological analysis. A special separation technique with selective solvents was applied to determine the content of block copolymer.

Synthesis of block copolymers with sonochemically prepared macroinitiators.     

Amphiphilic Block Copolymers Containing Regioregular Poly(3‐hexylthiophene) and Poly(2‐ethyl‐2‐oxazoline)

Poly(3‐hexylthiophene)‐block‐poly(2‐ethyl‐2‐oxazoline) amphiphilic rod–coil diblock copolymers have been synthesized by a combination of Grignard metathesis (GRIM) and ring‐opening cationic polymerization. Diblock copolymers containing 5, 15, and 30 mol‐% poly(2‐ethyl‐2‐oxazoline) have been synthesized and characterized. The synthesized rod–coil block copolymers display nanofibrillar morphology where the density of the nanofibrills is dependent on the concentration of the poly(2‐ethyl‐2‐oxazoline) coil segment. The conductivity of the diblock copolymers was lowered from 200 to 35 S · cm^?1 with an increase in the content of the insulating poly(2‐ethyl‐2‐oxazoline) block. By contrast, the field‐effect mobility decreased by 2–3 orders of magnitude upon the incorporation of the poly(2‐ethyl‐2‐oxazoline) insulating segment.

     

Synthesis of Processable Inorganic‐Organic Hybrid Polymers Based on Poly(silsesquioxanes): Grafting from Polymerization Using ATRP

Inorganic‐organic hybrid polymers have been synthesized utilizing atom transfer radical polymerization (ATRP) from a functionalized poly(methylsilsesquioxane) (PMSSQ) macroinitiator. Different polymeric ATRP initiators were prepared by co‐condensation of functionalized trichlorosilanes with methyltrimethoxysilane. Various vinyl monomers have been successfully grafted from these macroinitiators, demonstrating a highly variable synthetic concept, which offers the chance to synthesize a wide spectrum of inorganic‐organic hybrid polymers. All synthesized polymers were soluble in various organic solvents. Spin‐coating these hybrid materials onto various substrates could produce stable and adherent surface coatings. Successful surface functionalization could be achieved on silicon, glass, metals or polymeric materials.

     

Physical Properties of PBMA‐b‐PBA‐b‐PBMA Triblock Copolymers Synthesized by Atom Transfer Radical Polymerization

The physical properties of well‐defined poly(butyl methacrylate)‐block‐poly(butyl acrylate)‐block‐poly(butyl methacrylate) (PBMA‐b‐PBA‐b‐PBMA) triblock copolymers synthesized by atom transfer radical polymerization (ATRP) are reported. The glass transition and the degradation temperature of copolymers were determined by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC measurements showed phase separation for all of the copolymers with the exception of the one with the shortest length of either inner or outer blocks. TGA demonstrated that the thermal stability of triblock copolymers increased with decreasing BMA content. Dynamic mechanical analysis was used for a preceding evaluation of adhesive properties. In these block copolymers, the deformation process under tension can take place either homogeneously or by a neck formation depending on the molecular weight of the outer BMA blocks and on the length of the inner soft BA segments. Microindentation measurements were also performed for determining the superficial mechanical response and its correlation with the bulk behavior.

Stress‐strain curves for the different PBMA‐b‐PBA‐b‐PBMA specimens at room temperature and at 10 mm/min.     

Effect of Block Order of ABA‐ and BAB‐Type NIPAAm/HEMA Triblock Copolymers on Thermoresponsive Behavior of Solutions

ABA and BAB triblock thermoresponsive copolymers (A = N‐isopropylacrylamide, B = 2‐hydroxyethyl methacrylate) have been synthesized by atom transfer radical polymerization (ATRP). BAB is shown to exhibit a higher transition temperature and a good solubility in water compared to ABA with the same composition and concentration. The differences are attributed to the distinct micellar structure, which is regulated by the block order of the copolymers. It is speculated that ABA and BAB copolymers separately form branch and flower micelles in water, which mainly influence the course of phase transition. The moduli of the ABA copolymer solution are higher than those of the BAB above gel point. In terms of hypothesized micelle models, it is proposed that the ‘branch’ micelles of the ABA solution preferably form more physical interconnections.

     

Novel polymeric surfactants: Synthesis of semi‐branched,non‐ionic triblock copolymers using ATRP

This article reports the synthesis of novel amphiphilic triblock copolymers with a semi‐branched PLURONIC^®7R structure by atom transfer radical polymerization (ATRP) in aqueous media. Poly(ethylene oxide)s (PEOs) with molecular weights 10 000 and 16 000 were end‐functionalized and used as bifunctional macroinitiators for the polymerization of oligo(propylene oxide) monomethacrylate by ATRP in a 1/3 v/v water/methanol mixture and in a 1/1 v/v water/1‐propanol mixture. Deviations from first‐order kinetics with respect to the monomer concentration were observed indicating that termination reactions were taking place. However, linear plots were obtained, when ln[M]₀/[M] was plotted against time^2/3 as suggested by Fischer. The effect on the control of the polymerization by adding Cu(II)Br₂ to the polymerization medium has been investigated. When 10 mol‐% of Cu(II)Br₂ was substituted for Cu(I)Br, normal first‐order kinetics were observed. A large reduction in the rate of polymerization was observed for the polymerization initiated by bifunctional PEO10 000 initiator, but almost no reduction in the rate of polymerization was observed, when the bifunctional PEO16 000 initiator was used. When the polymerizations were conducted in 1/1 v/v water/1‐propanol, unexpectedly high rates of polymerization were observed.

Synthesis of amphiphilic block copolymers with a semi‐branched PLURONIC^®R architecture using ATRP.     

Well‐Defined Miktocycle Eight‐Shaped Copolymers Composed of Polystyrene and Poly(ε‐caprolactone): Synthesis and Characterization

A series of well‐defined miktocycle number‐eight‐shaped copolymers composed of cyclic polystyrene (PS) and cyclic poly(ε‐caprolactone) (PCL) have been successfully synthesized by a combination of atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP), and “click” reaction. The synthesis involves three steps: 1) preparation of tetrafunctional initiator with two acetylene groups, one hydroxyl group and a bromo group; 2) preparation of two azide‐terminated block copolymers, N₃‐PCL‐(CH?C)₂‐PS‐N₃, with two acetylene groups anchored at the junction; and 3) intramolecular cyclization of the block copolymer through “click” reaction under high dilution. The ¹H NMR, FT‐IR, and gel permeation chromatography (GPC) techniques are applied to characterize the chemical structures of the resulting intermediates and the target polymers. Their thermal behavior is investigated by differential scanning calorimeter (DSC). The decrease in chain mobility of eight‐shaped copolymers restricts the crystallization of PCL.

     

Double‐Gyroid Morphology of a Polystyrene‐block‐Poly(ferrocenylethylmethylsilane) Diblock Copolymer: A Route to Ordered Bicontinuous Nanoscale Architectures

A polystyrene‐block‐poly(ferrocenylethylmethylsilane) diblock copolymer, displaying a double‐gyroid morphology when self‐assembled in the solid state, has been prepared with a PFEMS volume fraction ?_PFEMS = 0.39 and a total molecular weight of 64 000 Da by sequential living anionic polymerisation. A block copolymer with a metal‐containing block with iron and silicon in the main chain was selected due to its plasma etch resistance compared to the organic block. Self‐assembly of the diblock copolymer in the bulk showed a stable, double‐gyroid morphology as characterised by TEM. SAXS confirmed that the structure belonged to the Ia d space group.

     

Synthesis of Blockcopolymers P3HT‐b‐PS Using a Combination of Grignard‐Metathesis and Nitroxide‐Mediated Radical Polymerization

The synthesis of π‐conjugated NMRP‐macroinitiators using GRIGNARD‐metathesis polymerization in combination with azide/alkyne‐“click” chemistry has been investigated. Alkoxyamine‐functionalized poly(3‐hexylthiophene)s (P3HTs) have been used for block copolymer preparations in presence of styrene. Molecular weight and molecular weight distribution of the polymers have been determined in SEC‐measurements, while end‐group determination was performed with MALDI‐ToF‐MS. The molecular weight of the P3HT macroinitiators was influenced by the amount of Ni‐catalyst during the GRIM reaction. Those macroinitiators have been used to prepare block copolymers in subsequent nitroxide‐mediated radical polymerization (NMRP). Thin‐layer‐morphologies of the block copolymers were investigated using tapping‐mode AFM. Short and disordered rods were observed, as well as continuous and parallel fibrils.

     

Styrene–Ferrocenyldimethylsilane–Methyl Methacrylate Triblock Copolymers: Synthesis and Phase Morphology

Triblock copolymers were synthesized from styrene (S), dimethylsilaferrocenophane (FS), and methyl methacrylate (MMA) via sequential anionic polymerization, taking advantage of the dimethylsilacyclobutane‐mediated endcapping of the living PS‐b‐PFS precursors. Well‐defined materials were obtained, having molecular weights of around 100 000 g · mol^?1 and polydispersity indices of below 1.1. First investigations of the microphase behavior show that the materials selforganize in bulk morphologies where PMMA is the matrix while PS forms either spheres or cylinders. The central short PFS block forms either droplets or cylinders, which are placed at the surface of the PS domains.