A Novel Percentage-Based System for Determining Aseptic Loosening of Total Knee Arthroplasty Tibial Components

Background

There are limited data on evaluating the significance of radiolucent lines and aseptic loosening in total knee arthroplasty (TKA). We sought to compare the sensitivity, specificity, and reliability of the Knee Society Total Knee Arthroplasty Roentgenographic Evaluation and Scoring System (KSRES) in detecting tibial component loosening compared to a novel percentage-based system (PBS).

Where Is the “Weak Link” of Fixation in Contemporary Cemented Total Knee Replacements?

BackgroundAseptic tibial loosening is a frequent cause of long-term failure following primary cemented total knee replacement. Failure of the tibial implant can occur at the implant-cement interface or at the cement-bone interface. Currently, it is unknown at which interface failure occurs in cases of aseptic tibial loosening. The following study was designed to determine which interface represents the “weak link” for tibial implant fixation.MethodsWe performed a retrospective analysis of 149 patients who were revised secondary to aseptic tibial loosening at our institution from 2005 to 2017. Operative reports and radiographs were reviewed on each patient to determine the location and pattern of fixation failure.ResultsImplant failure was more prevalent at the implant-cement than cement-bone interface, 140/149 (94.0%) vs 9/149 (6.0%). Additionally, we noted 2 distinct patterns of failure in patients that loosened at the implant-cement interface. Ninety of 140 (64.3%) patients developed varus collapse pattern of failure. Forty-nine of 140 (35.0%) patients developed failure between the implant-cement interface without angulation. All 149 patients had heterotopic bone formation anterior to the tibial baseplate, which was consistent regardless of which interface failed.ConclusionThe most frequent interface failure identified in our study was at the implant-cement interface, 140/149 (94.0%). This finding has substantial clinical ramifications. Because failure was predominantly at the implant-cement interface there may be design opportunities for increasing implant fixation to cement. Implants with improved undersurface tibial tray features may be necessary to mitigate the risk of failure at this interface, especially in overly active patients or those with elevated body mass indices.     

Modular Tibial Stem Use and Risk of Revision for Aseptic Loosening in Cemented Primary Total Knee Arthroplasty

BackgroundModular tibial stem extensions in total knee arthroplasty (TKA) are designed to reduce the risk of aseptic loosening of the tibial base plate. However, these implants add significant cost and an evaluation of their effectiveness in reducing this risk of loosening has not been studied in a large cohort. We sought to evaluate modular tibial stem utilization in primary TKA.MethodsWe conducted a cohort study using our integrated healthcare system’s Total Joint Replacement Registry. Patients who underwent cemented primary TKA were identified (2009-2019). Propensity scores were used to 1:1 match patients without to those with a stem extension. Cox proportional-hazards regression was used to evaluate the risk for revision due to aseptic loosening.ResultsTen thousand four hundred seventy six TKA with a modular tibial stem were matched to 10,476 TKA without a tibial stem. Stem utilization associated with a lower risk of revision for loosening across all postoperative follow-up (hazard ratio = 0.38, 95% confidence interval = 0.17-0.85).ConclusionIn a matched cohort study, we observed presence of a stem extension was associated with a lower risk of revision for aseptic loosening. Further study to identify specific risk factors for aseptic loosening and confirm the findings presented here are warranted.Level of EvidenceLevel III.     

Reduced Aseptic Loosening With Fully Cemented Short-Stemmed Tibial Components in Primary Cemented Total Knee Arthroplasty

BackgroundRecently, the use of short tibial stems in the obese population undergoing total knee arthroplasty (TKA) has been proposed. Thus, we designed a study to assess tibial component survivorship after primary TKA using a single implant both with and without a fully cemented stem extension performed by a single surgeon.MethodsA search of our institutional research database was performed. A minimum 2-year follow-up was selected. Cohorts were created according to patient body mass index (BMI; >40 kg/m² and <40 kg/m²) and the presence (stemmed tibia [ST]) or absence (non-stemmed tibia [NST]) of a short tibial stem extension. Kaplan-Meier survival analyses for aseptic loosening and log-rank tests were performed.ResultsA total of 236 patients were identified (ST = 162, NST = 74). Baseline patient characteristics were statistically similar between cohorts with the exception of BMI which was greater in the ST cohort (32.9 kg/m², 30.6 kg/m²; P = .01). Kaplan-Meier survival analysis at 5 years was superior for the BMI < 40 kg/m² cohort (98.9%, 93.1%; P = .045), the ST cohort (100%, 94.5%; P = .006), and the BMI > 40 kg/m² with ST cohort at 4 years (71.4%, 100%; P = .008).ConclusionMorbid obesity and a short native tibial stem design appear to be associated with aseptic loosening in primary TKA. This appears to be mitigated through the use of an ST. As such, the use of ST may be considered in at-risk patients. Alternatively, implants with longer native stem designs can be employed. Modern short-stemmed tibial components may need to be redesigned.     

Axial and Sagittal Rotation of Cementless Tibial Baseplates Occurs in Bone Under Joint Loading

BackgroundThere has been a recent increase in the use of cementless fixation for primary total knee arthroplasty. While the early results of contemporary cementless implants are promising, understanding the behavior of cementless tibial baseplates under loading remains an ongoing interest. The objective of this study was to identify the pattern of displacement that occurred under loading for a single cementless tibial baseplate design at one year post operation for stable and continuously migrating implants.MethodsThere were 28 subjects from a previous trial of a pegged highly porous cementless tibial baseplate evaluated. Subjects underwent supine radiostereometric exams from two weeks through one year after surgery. At one year, subjects also underwent a standing radiostereometric exam. Fictive points on the tibial baseplate model were used to relate translations to anatomical locations. Migration over time was calculated to determine if subjects displayed stable or continuous migration. The magnitude of inducible displacement between the supine and standing exams was calculated.ResultsInducible displacement patterns were similar between stable and continuously migrating tibial baseplates. Displacements were greatest in the anterior-posterior axis followed by the lateral-medial axis. Correlation of displacements between adjacent fictive points in these axes indicated an axial rotation of the baseplate occurred under loading (r² = 0.689-0.977, P < .001). Less displacement occurred in the superior-inferior axis and correlations indicated an anterior-posterior tilt of the baseplate occurred under loading (r² = 0.178-0.226, P = .009-.023).DiscussionFrom supine to standing position the predominant pattern of displacement for this cementless tibial baseplate was axial rotation, with some subjects also displaying an anterior-posterior tilt.     

A Prophylactic Tibial Stem Reduces Rates of Early Aseptic Loosening in Patients with Severe Preoperative Varus Deformity in Primary Total Knee Arthroplasty

BackgroundPatients with a preoperative varus deformity >8 degrees are at increased risk of aseptic loosening after total knee arthroplasty. This study analyzes the effect of a tibial stem on the rate of aseptic loosening in patients with a severe preoperative varus deformity.MethodsPatients with a preoperative varus deformity of >8 degrees and 2-year minimum follow-up with a stemmed tibial component (n = 67) were matched 1:2 to patients with a similar preoperative varus deformity with a standard tibial component (n = 134). Radiolucent lines were measured on the tibia at 6 weeks, 1 year, and 2 years postoperatively using the Knee Society Radiographic Evaluation System. Failure was defined as revision due to aseptic loosening of the tibial component. Outcomes were evaluated using Student’s t-tests and log-rank tests.ResultsPatients with tibial stems had greater preoperative deformity (12.9 vs 11.3 degrees, P = .004). There was no difference in postoperative alignment (1.7 vs 2.1 degrees varus, P = .25) or tibial component angle (1.8 vs 2.1 degrees varus, P = .33). Patients with stems were more likely to have more constraint (44.8% vs 1.5%, P < .001). Progression of radiolucent lines >2 mm was observed in 17.6% (23/134) vs 5.97% (4/67) of patients in the stem group (P = .03). Rates of aseptic loosening were lower in the stem group (0% vs 5.15%, P = .05).ConclusionDespite worse preoperative deformity and higher utilization of constraint, tibial stem use in patients with severe preoperative varus deformity resulted in lower rates of aseptic loosening. Prophylactic use of stems in these patients may help increase implant survival.     

Fluoroscopically Assisted Radiographs Improve Sensitivity of Detecting Loose Tibial Implants in Revision Total Knee Arthroplasty

Background

Fluoroscopically assisted radiographs theoretically improve detection of total knee arthroplasty (TKA) implant loosening by providing a better evaluation of the true implant interface, but their utility has not been well studied. We sought to determine whether fluoroscopically guided radiographs improve the sensitivity, specificity, and interobserver reliability of determining TKA implant loosening compared to standard radiographs.

The Effect of Rotational Fixation Error of the Tibial Cutting Guide and the Distance Between the Guide and the Bone on the Tibial Osteotomy in Total Knee Arthroplasty

Computed tomography based computer simulation studies were made on fifty consecutive patients with osteoarthritis scheduled for TKA. Proximal tibial cutting was simulated with the cutting guide placed at different rotational errors (− 10°, 0°, 10° and 20° of internal rotation) and different distances (4 cm and 8 cm) between the alignment rod and the bone. Only ten degrees of rotation error with 8 cm of distance resulted in over 3° of varus or valgus tibial cut. Our study demonstrated that rotational mismatch between the proximal and distal part of the tibia should be avoided and the distance between the alignment rod and the bone should be as short as possible to achieve proper tibial alignment.     

Retrospective Evaluation of the Duracon Periapatite-Coated Tibial Tray : Midterm Results and Factors Affecting Success

This study reports the retrospective radiographic outcome of a series of 63 consecutive total knee arthroplasties using an uncemented hydroxyapatite-coated Duracon cruciate-retaining tibial baseplate (Stryker Howmedica Osteonics Corp, Mahwah, NJ). Sixty-three knees were assessed at a mean follow-up of 65 months. The knees were primarily diagnosed with osteoarthritis with a mean age of 61 years. Radiographic analysis showed 6 knees with tibial baseplate radiolucencies, with all of these resolving or improving over the course of the study. All tibial baseplates were implanted with the concomitant use of autologous bone slurry. There were no reoperations for aseptic loosening, fracture, or patellofemoral problems. This intermediate study demonstrates excellent radiographic outcomes for uncemented hydroxyapatite-coated Duracon cruciate-retaining tibial baseplates and evaluates other factors felt to be important in the success of a cementless implant.     

Inducible Displacement of a Trabecular Metal Tibial Monoblock Component

Radiostereometric analysis is a highly accurate technique that can be used for measuring micromotion at the bone-implant interface. The purpose of this study was to compare the inducible displacement of the uncemented Trabecular Metal (TM; Zimmer, Warsaw, Ind) tibial monoblock component with that of a cemented implant. Inducible displacement of 14 uncemented TM components and 11 cemented components was measured 24 to 48 months postoperatively. Longitudinal migration of the implants was also measured with radiostereometric analysis at 6, 12, and 24 months postoperatively. The uncemented TM group had significantly lower inducible displacement than the cemented components. Significant correlations were found between longitudinal migration and the inducible displacement tests. The low values of inducible displacement in the TM group indicated good fixation and a promising long-term prognosis.     

Undersizing the Tibial Baseplate in Cementless Total Knee Arthroplasty has Only a Small Impact on Bone-Implant Interaction: A Finite Element Biomechanical Study

BackgroundThe tibial component in total knee arthroplasty (TKA) is often chosen to maximize coverage of the tibial cut, which can result in excessive internal rotation of the component. Optimal rotational alignment may require a smaller baseplate with suboptimal coverage that could threaten fixation. We asked: “does undersizing the tibial component of a cementless TKA to gain external rotation increase the risk of bone failure?”MethodsWe developed computational finite element (FE) analysis models from the computed tomography (CT) scans of 12 patients scheduled for primary TKA. The models were implanted with a cementless tibial baseplate that maximized coverage and one or two sizes smaller and externally rotated by 5°. We calculated the risk of bone collapse under loads representative of stair ascent.ResultsUndersizing the implant increased the area at risk of collapse for eight patients. However, the area at risk of collapse for the undersized implant (range, 5.2%-16.4%) was no different (P = .24) to the optimally sized implant (range, 4.5%-17.9%). The bone at risk of collapse was concentrated along the posterior edge of the implant. The area at risk of collapse was not proportional to implant size, and for four subjects undersizing the implant actually decreased the area at risk of collapse.ConclusionWhile implants should maximize coverage of the tibial cut and seek support on dense bone, undersizing the tibial component to gain external rotation had minimal impact on the load transfer to the underlying bone. This FE analysis model of a cementless tibial baseplate may require further validation and additional studies to investigate the long-term biomechanical effects of undersizing the tibial baseplate. In conclusion, while surgeons should strive to use the appropriate tibial baseplate for each patient, our model identified only minor biomechanical consequences of undersizing the implant for the immediate postoperative bone-implant interaction and implant subsidence.     

Cementless vs Cemented Tibial Fixation in Primary Total Knee Arthroplasty

Background

The ideal fixation for modern tibial components in total knee arthroplasty (TKA) remains controversial with uncertainty on whether cementless implants can yield equivalent outcomes to cemented fixation in early follow-up.

Superior Survival of Fully Cemented Fixation Compared to Hybrid Fixation in a Single Design Rotating Hinge Knee Implant

BackgroundClinical observations revealed higher rates of aseptic loosening for hybrid fixated rotating hinge knee implants compared to fully cemented ones. We hypothesize that the use of a fully cemented fixation technique had a higher survival rate for aseptic loosening compared to a hybrid fixation technique in a rotating hinge knee implant.MethodsAll procedures of patients who were treated with the RT-PLUS rotating hinge knee implant (Smith & Nephew, Memphis, TN) between 2010 and 2018 were included. Primary outcome was revision for aseptic loosening. Kaplan-Meier survivorship and Cox proportional hazard regression analysis were performed to calculate survival rates and hazard ratios.ResultsA total of 275 hinge knee implants were placed in 269 patients (60 primary procedures, 215 revisions). Median follow-up was 7.3 ± 3.9 years. In total, 24 components (16 hybrid femur, 2 fully cemented femur, 6 hybrid tibia; all revision procedures) in 19 patients were revised for aseptic loosening. Kaplan-Meier survivorship analysis showed superior survival rates of fully cemented components (femur 97.1%; tibia 100%) compared to hybrid fixated components (femur 89.5%; tibia 95.9%) at the 10-year follow-up. Multivariate Cox hazard analysis showed a significantly higher risk of aseptic loosening for hybrid fixated components, a prior stemmed component and the femoral component.ConclusionFully cemented fixation showed superior survival rates for aseptic loosening compared to hybrid fixation in a single design rotating hinge knee implant. A prior stemmed component appears to be a risk factor for aseptic loosening and the femoral component seems to be more prone to loosening.     

The Effect of Medial Release of the Distal Patellar Tendon Insertion on Lateral Patella Translation and Residual Insertion Strength: A Cadaveric Study

Patellar tendon avulsion is a risk with difficult exposure in a stiff knee, patella baja or previous tibial osteotomy. We sought to define a safe amount of release of the patellar tendon insertion for such cases. Eleven pairs of fresh frozen cadaveric lower limb specimens were acquired and randomized to either intact or partial release of the distal tibial insertion. Partial release of the tibial insertion of the tendon increased lateral exposure a mean 29% ± 15% (P = 0.002) while reducing ultimate strength to a mean of 80% that of the intact contralateral tendon. Measured patella release increased lateral patella translation and can be performed without risk of catastrophic rupture with basic activities of daily living following TKA.     

Increased Survivorship of Cementless versus Cemented TKA in the Morbidly Obese. A Minimum 5-Year Follow-Up

Background

Total knee arthroplasty (TKA) in the morbidly obese patients can be challenging with an increased risk of complications. Studies have shown increased aseptic failures with well-aligned cemented TKAs in the obese patient. The purpose of this study is to determine if TKA in the morbidly obese (body mass index [BMI] ≥ 40) using cementless implants would demonstrate improved results and survivorship compared to cemented TKA at a minimum 5-year follow-up.

A Novel and Reproducible Reference Axis for Distal Tibial Axial Rotation

We hypothesized that the tibial plafond revealed a novel anatomical reference axis associated with the axial alignment through an image processing technique. The plafond axis (PLA) was defined as the line connecting the midpoints of the medial and lateral plafond margin. In terms of intraclass correlation coefficient, the reproducibility to identify the PLA was not less than that to identify a conventional trans-malleolar axis (TMA). When the proximal medial–lateral axis was applied, the tibial torsion with reference to the PLA and the TMA was 12.0° ± 8.4°, and 23.3° ± 8.6°, respectively. The PLA can be considered a reproducible reference and is expected to be applicable in preoperative planning as well as postoperative evaluation of the implant alignment in total knee arthroplasty.     

Deformation and Loosening of the Tibial Component in Knee Arthroplasty with Unicompartmental Endoprostheses

Roentgenological signs of deformation and loosening of the tibial component in knee arthroplasties with unicompartmental endoprostheses occurred in one-third of 87 rheumatoid (RA) knees within 2 years and in one-fifth of 107 osteoarthritic (OA) knees within 3 years after the operation. Compared with thicker components significantly more 6 mm components in RA, and 6 and 9 mm components in OA became deformed and loose. There was no difference in the clinical assessment of the knees with and without deformed tibial components. Reoperations were recorded during an extended follow-up. In the group with initially asymptomatic loosening twelve RA knees within four and a half years and three OA knees within four years developed pain on weight-bearing and had to be reoperated. One patient (OA) had loose components without any roentgenological signs; the loosening was first discovered when the unoperated compartment was revised because of secondary osteoarthrosis. Knees fitted with 6 mm components more often required reoperation because of loosening than did those with thicker components.     

Contemporary Total Hip and Total Knee Arthroplasty Results in Patients with Hemochromatosis

BackgroundHemochromatosis can result in metabolic bone pathology (due to excessive iron absorption) and degenerative joint disease, leading to total joint arthroplasties. The aim of this study is to analyze the survivorship, complications, radiographic results, and clinical outcomes of patients with hemochromatosis who received either a total hip arthroplasty (THA) or a total knee arthroplasty (TKA).MethodsWe identified 34 lower extremity arthroplasties in 29 patients with hemochromatosis performed between 2000 and 2016. There were 17 primary THAs in 15 patients and 17 primary TKAs in 14 patients. Mean age at arthroplasty was 63 years with 76% being male. The mean body mass index was 28 kg/m². Mean follow-up was 5 years.ResultsThe survivorship free from any revision for THAs was 94% at 10 years. One patient was revised for aseptic loosening of the femoral stem at 6 months. In THA patients, no infections, no other complications, and no radiographic evidence of aseptic loosening were identified. Harris Hip Scores improved from a mean of 55 preoperatively to 94 postoperatively (P < .001). The survivorship free from any revision for TKAs was 100% at 10 years. Two patients (12%) developed acquired idiopathic stiffness postoperatively; no infections were identified. There was no radiographic evidence of aseptic loosening in any TKA. Knee Society Scores improved from a mean of 61 preoperatively to 94 postoperatively (P < .001).ConclusionThis study found excellent survivorship, significant improvements in clinical outcomes, and a very low complication profile for both THA and TKA in patients with hemochromatosis.     

Early Nontraumatic Fracture of the Polyethylene Tibial Post in a NexGen LPS-Flex Posterior Stabilized Knee Prosthesis

Fracture of a polyethylene tibial post in a knee prosthesis after a total knee arthroplasty (TKA) is an uncommon but severe complication of polyethylene tibial post wear. A fractured tibial post results in an unstable and malfunctioning knee. Revision knee surgery is necessary to restore function of the affected knee. We report a case of a nontraumatic fracture of a tibial polyethylene post that occurred in a 63-year-old man with left-sided hemiparesis 3 years after he had undergone left TKA with a NexGen LPS-Flex total knee prosthesis. To our knowledge, this is the first report of a nontraumatic fracture to the tibial post with anterolateral to posterior breakage after a NexGen LPS-Flex TKA.     

The Distribution of Implant Fixation for Femoral Components of TKA: A Postmortem Retrieval Study

Aseptic loosening of total knee arthroplasty (TKA) components is the foremost cause of implant failure in the long term. While tibial component loosening is of primary concern, femoral loosening may become a clinical problem due to younger, more active patients seeking TKA, and also high-flexion designs. In this study, we analyzed the fixation for 19 non-revised, postmortem retrieved, femoral components of TKA with time in service ranging from 1 to 22 years. We found that the average total contact fraction for cemented components was 9.5% and had a power law response (decrease) with years in service. The average initial interdigitation depth was 0.7 mm, and the average current interdigitation depth was 0.13 mm. Loss of interdigitation was 81%. Over all, minimal fixation seems necessary for long-term success of TKA femoral components.