Evaluation of recovery in lip closing pressure and occlusal force and contact area after orthognathic surgery

PurposeThe purpose of this study was to evaluate the relationship between lip closing force, occlusal contact area and occlusal force after orthognathic surgery in skeletal Class III patients.Subjects and methodsThe subjects consisted of 54 patients (28 female and 26 male) diagnosed with mandibular prognathism who underwent sagittal split ramus osteotomy with and without Le Fort I osteotomy. Maximum and minimum lip closing forces, occlusal contact area and occlusal force were measured pre-operatively, 6 months and 1 year post-operative.ResultsMaximum and minimum lip closing forces, occlusal contact area and occlusal force increased with time after surgery, however a significant increase was not found in the occlusal contact area in women. In increased ratio (6 months/pre-operative and 1 year/pre-operative), the maximum lip closing force was significantly correlated with the occlusal contact area (P < 0.0001).ConclusionsThis study suggested that orthognathic surgery could improve the occlusal force, contact area and lip closing force, and an increase ratio in maximum lip closing force was associated with an increased ratio in occlusal contact area.     

Changes in the lip closing force of patients with class III malocclusion before and after orthognathic surgery

The purpose of this study was to examine the changes in lip pressure before and after orthognathic surgery for skeletal Class III patients. The subject groups were 32 female and 31 male patients diagnosed with mandibular prognathism and/or maxillary retrognathism who underwent orthognathic surgery. Control groups consisted of 20 women and 20 men with normal occlusion without dento-alveolar deformity. Maximum and minimum lip closing force was measured with Lip De Cum^® for the control groups and subject groups preoperatively and 6 months postoperatively. The difference between the pre- and postoperative values of the groups was examined statistically. The maximum lip closing force in men was significantly larger than that in women in both the preoperative Class III group (p = 0.0330) and the control group (p = 0.0097). The preoperative Class III group was significantly smaller than the control group in maximum lip closing force in both men (p < 0.0001) and women (p < 0.0001). The postoperative maximum lip closing force was significantly larger than the preoperative value in both men (p = 0.0037) and women (p = 0.0273) in the Class III group. This study suggested that the maximum lip closing force increases after orthognathic surgery in Class III patients.     

Pyramidal and posterior osseous release for maxillary superior/posterior mobilization using an ultrasonic bone-cutting device after Le Fort I osteotomy

AimThe purpose of this study was to evaluate the efficiency of pyramidal and posterior osseous release (PPOR) for maxillary impaction using an ultrasonic bone-cutting device after Le Fort I (LFI) osteotomy.Materials and methodsIn total, 31 Japanese adults with jaw deformities, diagnosed as having maxillary excess with mandibular prognathism or deficiency, underwent LFI osteotomy and bilateral sagittal split osteotomy. The patients were divided into two groups: a trimming group (15 patients, four men and 11 women; mean age 24.8 years) and a PPOR group (16 patients, seven men and nine women; mean age 22.8 years). In the trimming group, osseous interference around the descending palatine artery (DPA) was removed using forceps, rounding bur, and reciprocating rasp. The PPOR technique was used to remove osseous fragments created by V-shaped osteotomy around the DPA following vertical osteotomy behind the DPA using an ultrasonic bone-cutting device (Variosurg 3; NSK, Tochigi, Japan). The operative times for maxillary osteotomy, total operative times (including bilateral sagittal split osteotomy), and total blood loss were assessed.ResultsThe mean planned amounts of maxillary impaction were 4.37 ± 1.27 mm in the trimming group and 4.38 ± 1.36 mm in the PPOR group (p = 0.98). The mean maxillary operative time for the PPOR group was significantly shorter, by 25.5% (p < 0.001). Total operative time for the PPOR group was also significantly shorter, by 24.3% (p < 0.001). Mean blood loss was significantly lower in the PPOR group than in the trimming group (p = 0.003).ConclusionThe PPOR technique for maxillary impaction after LFI osteotomy shortened the operative time and enabled secure reduction of the maxilla in patients who required the treatment of maxillary impaction with preservation of the DPA bundle.     

Maximum Closing Force of Mentolabial Muscles and Type of Malocclusion

Objective:To measure the closing force of the upper and lower lips and to ascertain the relationship between the maximum closing force of the mentolabial muscles and types of malocclusion.Materials and Methods:Of those who showed the full eruption of a second molar and no permanent tooth loss, 99 subjects were chosen who showed a positive overbite and ANB and no skeletal asymmetry. By using the Y-meter, which can measure the lip force in the vertical direction using a load cell, the closing forces of the upper and lower lips were measured separately. A one-way analysis of variance (ANOVA) test and the Pearson''s correlation test were used to evaluate the interrelationship between lip force and dentofacial morphology.Results:The lip closing force was greater in male and Class I subjects. Upper lip force was greater than that of the lower lip in all groups. The values of lip closing forces were related to the variables of upper incisor angulation. In Class II subjects, the values of lip closing forces were also related to the vertical skeletal pattern.Conclusions:The mentolabial muscle force was highly correlated with dentofacial structure and types of malocclusion.     

Cranial base measurements in different anteroposterior skeletal relationships using Bjork-Jarabak analysis

ObjectivesTo assess the linear and angular cranial base measurements (Bjork polygon) in different anteroposterior (AP) skeletal relationships using Bjork-Jarabak analysis.Materials and MethodsPretreatment lateral cephalograms of 288 (146 women, 142 men, mean ages 21.24 ± 2.72 years and 22.94 ± 3.28 years, respectively) adult patients were divided into Class I, II, and III skeletal relationships according to their ANB angle. Linear and angular measurements of Bjork polygon were measured and compared among different skeletal relationships. Analysis of variance was performed to detect the differences among groups. Independent-sample t-test was used to detect differences between men and women.ResultsThe Class II skeletal relationship has a significantly larger saddle angle than Class III does (P < .05), whereas Class III has a significantly larger gonial angle than Class II does (P < .05). The articular angle and sum of Bjork polygon angles were not significantly different among groups (P > .05). Anterior (N-S) and posterior (S-Ar) cranial base lengths were similar in the different AP skeletal relationships (P > .05). The ramal height and body of the mandible length were significantly larger in Class III compared with Class I and II (P < .05). Women had a significantly larger articular angle than men did (P < .05), although men had significantly larger linear measurements of Bjork polygon than women did (P < .05).ConclusionsThe Class III skeletal relationship has a smaller saddle angle and larger mandibular length and gonial angle. Men have a larger cranial base and mandibular linear measurements and a smaller articular angle compared with women.     

The effect of subspinal Le Fort I osteotomy and alar cinch suture on nasal widening

The aim of this retrospective study was to evaluate the relationships between upper jaw movements and nasal soft-tissue changes in patients who have undergone subspinal Le Fort I osteotomy combined with alar cinch suture.Single and multivariate linear regression analyses were used to examine the relationships between greatest inter-alar width (GAW) and maxillary advancement, maxillary impaction, and rotational movements. The database of our referral hospital was searched for patients who had undergone upper jaw surgery with a subspinal LFI osteotomy to correct dentoskeletal deformities between April 2012 and June 2016.Thirty-eight of the patients (15 men and 23 women) who were identified were eligible for inclusion. The average change in inter-alar width (ΔGAW) was +1.7 ± 1.2 mm. GAW increased by 0.3 mm (p < 0.0001) for each millimetre of maxillary advancement, and increased by 0.5 mm (p < 0.0001) for each millimetre of maxillary impaction. GAW increased by 0.2 mm for each degree of counterclockwise rotation of the occlusal plane (p < 0.0001).An analysis of our data compared with the current literature confirmed that subspinal Le Fort I combined with alar cinch suture reduced alar base widening.     

Retrognathic maxilla in individuals born with oral clefts is due to intrinsic factors and not only due to early surgical treatment

ObjectivesTo determine if the skeletal form of individuals born with oral clefts was associated with maxillary position.Materials and MethodsLateral cephalometric radiographs of 90 individuals 8 to 12 years old born with or without cleft lip and palate paired by age and sex were used. Skull base length, cranial base angle, cranial deflection angle, and maxillary skeletal length and position were studied. Also, mandibular skeletal length and position, lower anterior facial height, and dental position were defined. Individuals were divided into three groups: 30 individuals born with cleft lip and palate with Class III malocclusion (UCLP Class III), 30 individuals born with cleft lip and palate with Class I malocclusion (UCLP Class I), and 30 individuals born without cleft lip and palate with Class III malocclusion (non-cleft Class III).ResultsWhen comparing the UCLP Class III group with the UCLP Class I group, there were differences in maxillary position (P < .001) and mandibular position (P = .004) found. No differences were found when comparing the UCLP Class III group with the non-cleft Class III group.ConclusionsThere are intrinsic factors that affect craniofacial morphology of individuals born with cleft lip and palate.     

Effect of setback Le Fort I osteotomy on midfacial soft-tissue changes as evaluated by cone-beam computed tomography superimposition for cases of skeletal Class III malocclusion

This study employed the cone-beam computed tomography (CBCT) superimposition method to evaluate postoperative midfacial soft-tissue changes in cases of skeletal Class III malocclusion after double-jaw surgery with setback and vertical reduction Le Fort I osteotomy. A retrospective study was carried out on 15 patients who had undergone maxillary setback Le Fort I osteotomy and mandibular setback sagittal split ramus osteotomy with alar cinch suturing and V-Y soft-tissue closure. Three dimensional CBCT volume scans were recorded preoperatively (T0) and 6 months postoperatively (T1) to measure soft-tissue changes of the upper lip and midface. Post-surgery, soft-tissue landmarks in the cheek and paranasal areas had moved forward; the soft-tissue thickness at the A-point had markedly increased (P < 0.05); there was no significant change in the subnasale, and the midline of the soft-tissue of the upper-lip area had moved backward. The extent of the mean soft-tissue change at the labrale superius was greater than that at the other soft-tissue landmarks of the upper lip. The results suggest that maxillary setback movement of the maxilla by alar cinch suturing has a beneficial effect on paranasal soft-tissue and lip contours for patients with protrusive lip and acute nasolabial angle.     

Soft tissue changes after mandibular setback and bimaxillary surgery in Class III patients

Objective:To evaluate the relationship between soft tissue and bone structure for Class III patients before and after bilateral sagittal split osteotomy (BSSO) and bimaxillary orthognathic surgery; to determine the impact of other factors on soft tissue change; and to evaluate correlations between thickness of tissue before surgery, SNA, SNB, and ANB angles, and soft tissue changes.Materials and Methods:The study included 78 Class III patients treated only with BSSO or with BSSO and Le Fort I osteotomy. Lateral cephalograms were taken before and 3 months to 1 year after surgery. After all points of the Zagreb82 and Legan and Burstone profile analysis were traced, the ratio of five soft tissue points before and after surgery was evaluated.Results:Soft tissue between points Sn and A and upper lip showed statistically significant changes for patients treated with bimaxillary surgery and BSSO. Only gender had an influence on soft tissue change. The correlation between soft tissue thickness and changes after surgery was significant. A change in SNB angle correlated with upper lip thickness for patients treated with BSSO but not for patients treated with BSSO and Le Fort I. SNA angle changes correlated with soft tissue changes between points Sn and A.Conclusion:Results of this study show soft tissue changes after BSSO and BSSO and Le Fort I and eliminate the deficiencies that were indicated in the meta-analysis of soft tissue changes from a previous study.     

The effect of mandibular setback or two-jaws surgery on pharyngeal airway among different genders

Cephalometric studies show significant gender differences in the size of the pharyngeal airway space. This study aimed to investigate and compare morphologic changes after mandibular setback or two-jaws surgery on the pharyngeal airway in men and women using computed tomography (CT). The sample included 34 women and 13 men diagnosed with Class III skeletal deformities, who had been treated by mandibular setback or bimaxillary surgery (maxillary advancement and mandibular setback). Anteroposterior, lateral and cross-sectional area dimensions of the airway, at the level of soft palate and base of tongue, were measured pre- and postoperatively on CT images. In the mandibular setback group, the anteroposterior and cross-sectional area of the pharyngeal airway at the level of the soft palate and base of tongue were significantly reduced for men or women (P < .05). In the two-jaws surgery group, only midsagittal anteroposterior dimensions at the same levels were significantly decreased for men or women (P < .05). The difference between any values measured between men and women who received bilateral sagittal split ramus osteotomy setback surgery or two-jaws surgery for the treatment of class III anteroposterior discrepancy were not statistically significant (P > .05). This study suggests that oropharyngeal airway measurements, important for airway patency, do not demonstrate sex dimorphism.     

Bimaxillary surgery in Class III malocclusion: Soft and hard tissue changes

The aim of this study was to quantify anteroposterior facial soft tissue changes with respect to underlying skeletal movements after Le Fort I maxillary advancement and mandibular setback surgery with sagittal split osteotomy in Class III skeletal deformity by using lateral cephalograms taken before and after the operation.The material consisted of 31 patient (15 female, 16 male cases, mean age was 26.7 ± 2.5 years) with Class III skeletal deformity. All patients were treated by Le Fort I maxillary advancement and mandibular setback surgery with sagittal split osteotomy. Lateral cephalograms were taken before and 1.4 ± 0.3 years after surgery. Wilcoxon test was used to compare the pre- and post-surgical measurements. Pearson correlation test was used to compare the relationships between the skeletal, dental and facial soft tissue changes.In the maxilla, the APOINTAP (the anteroposterior position of A point) and ITIPAP (the anteroposterior position of upper incisor) showed significant protractions (?3.19 ± 3.63, and ?3.19 ± 4.52, p < 0.01). In the mandible, the L1TIPAP (the anteroposterior position of lower incisor, ?3.20 ± 5.83, p < 0.01), L1TIPSI (the superoinferior position of lower incisor, ?2.43 ± 10.31, p < 0.05), BPOINTSP (the superoinferior position of B point, ?2.28 ± 12.51, p < 0.05) and BPOINTAP (the anteroposterior position of B point, ?3.19 ± 9.31, p < 0.01) showed significant retractions and upper positions after bimaxillary surgery. The insignificant decrease in soft tissue Pog–Vert distance was correlated the significant upper position of B point and lower incisor (r: 0.851, p < 0.001 and r: 0.842, p < 0.001).     

Two-year follow-up of changes in bite force and occlusal contact area after intraoral vertical ramus osteotomy with and without Le Fort I osteotomy

This study was performed to examine the longitudinal changes in bite force and occlusal contact area after mandibular setback surgery via intraoral vertical ramus osteotomy (IVRO). Patients with mandibular prognathism who underwent IVRO (surgical group: 39 men and 39 women) were compared with subjects with class I skeletal and dental relationships (control group; 32 men and 35 women). The surgical group was divided into two subgroups: 1-jaw surgery (n = 30) and 2-jaw surgery (n = 48). Bite force and contact area were measured in maximum intercuspation with the Dental Prescale System before treatment, within 1 month before surgery, and at 1, 3, 6, 9, 12, and 24 months postsurgery. A linear mixed model was used to investigate the time-dependent changes and associated factors. Bite force and contact area decreased during presurgical orthodontic treatment, were minimal at 1 month postsurgery, and increased gradually thereafter. The 1-jaw and 2-jaw subgroups showed no significant differences in bite force. The time-dependent changes in bite force were significantly different according to the contact area (P < 0.05). The results of this study suggest that bite force and occlusal contact area gradually increase throughout the postsurgical evaluation period. Increasing the occlusal contact area may be essential for improving bite force after surgery.     

Three-dimensional evaluation of soft tissue change gradients after mandibular setback surgery in skeletal Class III malocclusion

Objective:To evaluate whether mandibular setback surgery (MSS) for Class III patients would produce gradients of three-dimensional (3D) soft tissue changes in the vertical and transverse aspects.Materials and Methods:The samples consisted of 26 Class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalograms and 3D facial scan images were taken before and 6 months after MSS, and changes in landmarks and variables were measured using a Rapidform 2006. Paired and independent t-tests were performed for statistical analysis.Results:Landmarks in the upper lip and mouth corner (cheilion, Ch) moved backward and downward (respectively, cupid bow point, 1.0 mm and 0.3 mm, P < .001 and P < .01; alar curvature-Ch midpoint, 0.6 mm and 0.3 mm, both P < .001; Ch, 3.4 mm and 0.8 mm, both P < .001). However, landmarks in stomion (Stm), lower lip, and chin moved backward (Stm, 1.6 mm; labrale inferius [Li], 6.9 mm; LLBP, 6.9 mm; B′, 6.7 mm; Pog′, 6.7 mm; Me′, 6.6 mm; P < .001, respectively). Width and height of upper and lower lip were not altered significantly except for a decrease of lower vermilion height (Stm-Li, 1.7 mm, P < .001). Chin height (B′-Me′) was decreased because of backward and upward movement of Me′ (3.1 mm, P < .001). Although upper lip projection angle and Stm-transverse projection angle became acute (Ch_Rt-Ls-Ch_Lt, 5.7°; Ch_Rt-Stm-Ch_Lt, 6.4°, both P < .001) because of the greater backward movement of Ch than Stm, lower lip projection angle and Stm-vertical projection angle became obtuse (Ch_Rt-Li-Ch_Lt, 10.8°; Ls-Stm-Li, 23.5°, both P < .001) because of the larger backward movement of Li than labrale superius (Ls).Conclusions:Three-dimensional soft tissue changes in Class III patients after MSS exhibited increased gradients from upper lip and lower lip to chin as well as from Stm to Ch.     

Obwegeser II osteotomy (transoral angle osteotomy) for open bite with skeletal class III deformity

IntroductionThis study evaluated postoperative stability after Obwegeser II osteotomy (transoral angle osteotomy, first reported by Obwegeser 1973) for severe open bite with mandibular prognathism.Patients and methodsThis retrospective study reviewed 20 consecutive patients who underwent only mandibular Obwegeser II osteotomy to correct open bite and mandibular prognathism. Lateral cephalograms were evaluated preoperatively (T1), immediate postoperatively (T2) and at least 6 months after the surgery (T3). Surgical and postsurgical changes in cephalometric measurements were evaluated statistically.ResultsOpen bite with skeletal class III malocclusion was corrected by the Obwegeser II osteotomy alone. After an average of 9.9 ± 5.2 mm of mandibular setback with open bite closure (T2–T1, over-bite change, 5.7 ± 2.4 mm) by counter-clockwise rotation of the mandible, the patients showed 0.8 ± 1.7 mm of horizontal relapse (p > 0.05), 1.1 ± 1.7 mm of vertical relapse at the B point (p = 0.011) and −0.2 ± 1.6 mm of over-bite change postoperatively (T3–T2).DiscussionWith the adequate control of the condylar position with rigid internal fixation, Obwegeser II osteotomy showed acceptable stability after the correction of open bite with mandibular prognathism without a simultaneous maxillary osteotomy. An isolated Obwegeser II osteotomy can be considered a reliable option in cases with moderate to severe open bite with mandibular prognathism when the maxillary osteotomy is not needed if the patients have a well-positioned maxilla.     

Comparison of lower lip hypoesthesia between hybrid fixation and conventional fixation following sagittal split ramus osteotomy

PurposeThe purpose of this study was to compare the recovery period of lower lip hypoesthesia between hybrid fixation and conventional fixation using absorbable plates and screw systems following sagittal split ramus osteotomy (SSRO).Subjects and methodsThe subjects were 66 patients (132 sides) who underwent bilateral SSRO setback surgery. They were divided into a hybrid fixation group (66 sides, 1 u-HA/PLLA plate and 4 mono-cortical screws and a bi-cortical screw in each side) and a conventional fixation group (66 sides, 1 u-HA/PLLA plate and 4 mono-cortical screws in each side). Trigeminal nerve hypoesthesia at the region of the lower lip was assessed bilaterally by the trigeminal somatosensory-evoked potential (TSEP) method.ResultsThe mean measurable periods were 8.1 ± 10.4 weeks in the hybrid fixation group, 5.1 ± 11.5 weeks in the conventional group with no significant difference. However, the maximum in the hybrid fixation group was 27 sides at 4 weeks postoperative and in the conventional fixation group was 37 sides at 1 week postoperative, and there was significant difference in the distribution of the measurable period (P < 0.0001).ConclusionThis study suggested that additional bi-cortical screws could affect the recovery of lower lip hypoesthesia after SSRO with bent absorbable plate fixation.     

Assessment of lateral pterygoid muscle and temporomandibular joint disc after Le Fort I osteotomy with and without intentional pterygoid plate fracture and sagittal split ramus osteotomy in class II and class III patients

The aim of the study was to examine lateral pterygoid muscle (LPM) and temporomandibular joint (TMJ) disc before and after Le Fort I osteotomy with and without intentional pterygoid plate fracture and sagittal split ramus osteotomy (SSRO) in class II and class III patients.Le Fort I osteotomy and SSRO were performed in class II and class III patients. LPM measurements using oblique sagittal computed tomography (CT) images and TMJ disc position using magnetic resonance imaging (MRI) were examined. Statistical comparisons were performed for the LPM and TMJ between class II and class III patients and between those with and without intentional pterygoid plate fracture in Le Fort I osteotomy.The subjects comprised 60 female patients (120 sides), with 30 diagnosed as class II and 30 as class III. Preoperatively, the width of the condylar attachment, width at eminence, length of the LPM, angle of the LPM, and square of the LPM were significantly smaller in the class II group than in the class III group (p < 0.05). After 1 year, the width of the condylar attachment, width at eminence, and angle of the LPM remained significantly smaller in the class II group than in the class III group (p < 0.0001). TMJ disc position was significantly related to the width of the condylar attachment of the LPM, both pre- and postoperatively (p < 0.0001). However, postoperative disc position did not change in all patients. Next, the class II patients (60 sides) were divided into two groups who underwent Le Fort I osteotomy with or without intentional pterygoid plate fracture. Changes in all measurements of the LPM showed no significant differences between these two groups.Our study suggested that TMJ disc position classification could be associated with the width of condylar attachment of the LPM before and after surgery, while the surgical procedure, including Le Fort I osteotomy with intentional pterygoid plate fracture, might not affect postoperative LMP or disc position in class II patients.     

Comparison of postoperative stability of three rigid internal fixation techniques after sagittal split ramus osteotomy for mandibular advancement

IntroductionThe aim of this investigation was to compare the skeletal stability of three different rigid fixation methods after mandibular advancement.Material and methodsFifty-five class II malocclusion patients treated with the use of bilateral sagittal split ramus osteotomy and mandibular advancement were selected for this retrospective study. Group 1 (n = 17) had miniplates with monocortical screws, Group 2 (n = 16) had bicortical screws and Group 3 (n = 22) had the osteotomy fixed by means of the hybrid technique. Cephalograms were taken preoperatively, 1 week within the postoperative care period, and 6 months after the orthognathic surgery. Linear and angular changes of the cephalometric landmarks of the chin region were measured at each period, and the changes at each cephalometric landmark were determined for the time gaps. Postoperative changes in the mandibular shape were analyzed to determine the stability of fixation methods.ResultsThere was minimum difference in the relapse of the mandibular advancement among the three groups. Statistical analysis showed no significant difference in postoperative stability. However, a positive correlation between the amount of advancement and the amount of postoperative relapse was demonstrated by the linear multiple regression test (p < 0.05).ConclusionIt can be concluded that all techniques can be used to obtain stable postoperative results in mandibular advancement after 6 months.     

Masseter muscle changes following orthognathic surgery: A long-term three-dimensional computed tomography follow-up

Objective:To evaluate the long-term changes of masseter muscle morphology in skeletal Class III patients with facial asymmetry following two-jaw orthognathic surgery (Le Fort I osteotomy + intraoral vertical ramus osteotomy).Materials and Methods:Using computed tomography (CT), a longitudinal study was conducted on 17 skeletal Class III patients with facial asymmetry. Measurements from the reconstructed three-dimensional (3D) CT images were compared from T1 (before surgery), T2 (1 year after surgery), and T3 (4 years after surgery). The maximum cross-sectional area (CSA), orientation, thickness, and width of the masseter muscle were measured on both the deviated and nondeviated sides. The control group included 17 volunteers with skeletal and dental Class I relationships without dentofacial deformities.Results:At T1, there were no significant differences in CSA, thickness, or width of masseter muscle between the deviated and nondeviated sides. Masseter muscle orientation was significantly more vertical on the nondeviated side than on the deviated side at T1 (P < .01); no significant bilateral differences were noted at T2 and T3. At T1, masseter muscle measurements were significantly lower than controls (P < .01). During T1–T3, a significant increase was noted in CSA, thickness, and width (P < .01) of masseter muscle. At T3, no significant difference was noted between the study and control groups.Conclusion:After surgery, the masseter muscle measurements of skeletal Class III asymmetry patients showed no significant differences compared with the control group within the 4-year follow-up period, indicating adaptation to the new skeletal environments and increased functional demand.     

Assessment of bone healing and hypoesthesia in the upper lip after Le Fort I osteotomy with self-setting α-tricalcium phosphate and absorbable plates

PurposeThe purpose of this study was to evaluate hypoesthesia of the upper lip and bone formation using self-setting α-tricalcium phosphate (Biopex^®) between the segments following Le Fort I osteotomy with bent absorbable plate fixation.Subjects and methodsThe subjects were 47 patients (94 sides) who underwent Le Fort I osteotomy with and without mandibular osteotomy. They were divided into a Biopex^® group (48 sides) and a control group (46 sides). The Biopex^® was inserted into the anterior part of the gap between the segments in the Biopex^® group. Trigeminal nerve hypoesthesia at the region of the upper lip was assessed bilaterally by the trigeminal somatosensory-evoked potential (TSEP) method. The area of the Biopex^® at the anterior part in the maxilla was assessed immediately after surgery and 1 year postoperatively by computed tomography (CT).ResultsThe mean measurable period and standard deviation were 13.2 ± 18.5 weeks in the control group, 14.5 ± 17.9 weeks in the Biopex^® group, and there was no significant difference in TSEP. The area of the Biopex^® after 1 year was significantly smaller than that immediately after surgery (right side: P = 0.0024, left side: P = 0.0001) and bone defects between the segments could not be found in the Biopex^® group. In the control group, although the areas of bone defect after 1 year were significantly smaller than that immediately after surgery on the right side (P = 0.0133) and left side (P = 0.0469) in the frontal view, complete healing of the bone defects could be seen in 12 of 46 sides after 1 year.ConclusionThis study suggested that inserting Biopex^® in the gap between the maxillary segments was useful for new bone formation and it did not prevent the recovery of upper lip hypoesthesia after Le Fort I osteotomy with absorbable plate fixation.     

Effect of post–orthognathic surgery condylar axis changes on condylar morphology as determined by 3-dimensional surface reconstruction

Objective: To evaluate the effect of postoperative condylar axis changes on mandibular condylar remodeling by comparing the condylar head in three-dimensional (3D) surface reconstructions before and after surgery in skeletal Class III deformities (one-jaw [mandibular setback] or two-jaw surgery), and also to determine the relationship between condylar inward rotation and condylar surface remodeling after orthognathic surgery.Materials and Methods:A retrospective analysis was conducted of 30 patients with skeletal Class III deformities who had received orthognathic surgery. Group 1 underwent one-jaw surgery (10 men, five women, age 22.4 ± 3.3 years), and group 2 underwent two-jaw surgery (10 men, five women, age 22.3 ± 2.2 years). Sixty condyles were reconstructed and superimposed pre- and postoperatively to compare the changes of condylar surfaces. The relation between the condylar axis change and the surface change using the Pearson correlation were investigated from the 3D image software.Results:Condylar surface changes before and after the surgery were significant. The postoperative inward rotation of the condyles was correlated with the average absolute deviation of the condyles, regardless of the surgery type (one- or 2-jaw surgery; r  =  .70, P < .05).Conclusion:After orthognathic surgery, condylar surface changes occurred, and condylar inward rotation was closely related to changes of condylar surface.