The selective modulation of endothelial cell mobility on RGD peptide containing surfaces by YIGSR peptides

The ability of the biomimetic peptides YIGSR, PHSRN and RGD to selectively affect adhesion and migration of human microvascular endothelial cells (MVEC) and vascular smooth muscle cells (HVSMC) was evaluated. Cell mobility was quantified by time-lapse video microscopy of single cells migrating on peptide modified surfaces. Polyethylene glycol (PEG) hydrogels modified with YIGSR or PHSRN allowed only limited adhesion and no spreading of MVEC and HVSMC. However, when these peptides were individually combined with the strong cell binding peptide RGD in PEG hydrogels, the YIGSR peptide was found to selectively enhance the migration of MVEC by 25% over that of MVEC on RGD alone (p<0.05). No corresponding effect was observed for HVSMC. This suggests that the desired response of specific cell types to tissue engineering scaffolds could be optimized through a combinatory approach to the use of biomimetic peptides.     

Human microvascular endothelial cell growth and migration on biomimetic surfactant polymers

Successful engineering of a tissue-incorporated vascular prosthesis requires cells to proliferate and migrate on the scaffold. Here, we report on a series of "ECM-like" biomimetic surfactant polymers that exhibit quantitative control over the proliferation and migrational properties of human microvascular endothelial cells (HMVEC). The biomimetic polymers consist of a poly(vinyl amine) (PVAm) backbone with hexanal branches and varying ratios of cell binding peptide (RGD) to carbohydrate (maltose). Proliferation and migration behavior of HMVEC was investigated using polymers containing RGD: maltose ratios of 100:0, 75:25 and 50:50, and compared with fibronectin (FN) coated glass (1 microg/cm2). A radial Teflon fence migration assay was used to examine HMVEC migration at 12 h intervals over a 48 h period. Migration was quantified using an inverted optical microscope, and HMVEC were examined by confocal microscopy for actin and focal adhesion organization/ arrangement. Over the range of RGD ligand density studied (approximately 0.19-0.6 peptides/nm2), our results show HMVEC migration decreases with increasing RGD density in the polymer. HMVEC were least motile on the 100% RGD polymer (approximately 0.38-0.6 peptides/nm2) with an average migration of 0.20 mm2/h in area covered, whereas HMVEC showed the fastest migration of 0.48+/-0.06 mm2/h on the 50% RGD surface ( approximately 0.19-0.30 peptides/nm2). In contrast, cell proliferation increased with increasing surface peptide density; proliferation on the 50% RGD surface was 1.5%+/-0.06/h compared with 2.2%+/-0.07/h on the 100% RGD surface. Our results show that surface peptide density affects cellular functions such as growth and migration, with the highest peptide density supporting the most proliferation but the slowest migration.     

Biodegradable poly(ethylene glycol)–peptide hydrogels with well-defined structure and properties for cell delivery

In this study, biodegradable PEG–peptide hydrogels have been synthesized using Click chemistry. A series of Arg-Gly-Asp (RGD) containing peptides were prepared via a solid phase synthesis approach, which were further functionalized with azide to yield peptide azide or peptide diazide. A tetra-hydroxy terminated 4-arm PEG was functionalized with acetylene and was reacted with peptide azide/diazide and/or PEG diazide to produce hydrogels via a copper mediated 1,3-cycloaddition (Click chemistry) generating a triazole linkage as the networking forming reaction. The gelation time ranged from 2 to 30 min, depending on temperature, catalyst and precursor concentration, as well as peptide structure. The resulting hydrogels were characterized by swelling, viscoelastic properties and morphology as well as their ability for cell attachment and proliferation. Hydrogels cross-linked by peptide diazide yielded higher storage modulus (G′) with shorter spacers between azide groups. As expected, the swelling degree decreased while the G′ increased with increasing the concentration of the precursors as a result of increased cross-linking density. Primary human dermal fibroblasts were used as model cells to explore the possibility of using the RGD peptide hydrogels for cell-based wound healing. The attachment and proliferation of the cells on the hydrogels were evaluated. The RGD peptide hydrogels synthesized with a peptide concentration of 2.7–5.4 mm achieved significantly improved cell attachment and greater cell proliferation rate when compared to the hydrogels without RGD peptides. These hydrogels may provide a platform technology to deliver cells for tissue repair.     

Attachment and spreading of fibroblasts on an RGD peptide-modified injectable hyaluronan hydrogel

Hyaluronan (HA) hydrogels resist attachment and spreading of fibroblasts and most other mammalian cell types. A thiol-modified HA (3,3'-dithiobis(propanoic dihydrazide) [HA-DTPH]) was modified with peptides containing the Arg-Gly-Asp (RGD) sequence and then crosslinked with polyethylene glycol (PEG) diacrylate (PEGDA) to create a biomaterial that supported cell attachment, spreading, and proliferation. The hydrogels were evaluated in vitro and in vivo in three assay systems. First, the behavior of human and murine fibroblasts on the surface of the hydrogels was evaluated. The concentration and structure of the RGD peptides and the length of the PEG spacer influenced cell attachment and spreading. Second, murine fibroblasts were seeded into HA-DTPH solutions and encapsulated via in situ crosslinking with or without bound RGD peptides. Cells remained viable and proliferated within the hydrogel for 15 days in vitro. Although the RGD peptides significantly enhanced cell proliferation on the hydrogel surface, the cell proliferation inside the hydrogel in vitro was increased only modestly. Third, HA-DTPH/PEGDA/peptide hydrogels were evaluated as injectable tissue engineering materials in vivo. A suspension of murine fibroblasts in HA-DTPH was crosslinked using PEGDA plus PEGDA peptide, and the viscous, gelling mixture was injected subcutaneously into the flanks of nude mice; gels formed in vivo following injection. After 4 weeks, growth of new fibrous tissue had been accelerated by the sense RGD peptides. Thus, attachment, spreading, and proliferation of cells is dramatically enhanced on RGD-modified surfaces but only modestly accelerated in vivo tissue formation.     

Polymer-free immobilization of a cyclic RGD peptide on a nitinol stent promotes integrin-dependent endothelial coverage of strut surfaces

This study examined the utility of a stabilized cyclic RGD peptide chemically modified to selectively bind to titanium-oxide for enhanced biocompatibility of self-expanding nitinol stents. Endothelial cells express integrin receptors that promote attachment to subendothelial matrix proteins. Integrin binding to arginine-glycine-aspartic acid (RGD) peptide derivatives mimic naturally occurring adherent interactions. Irreversible covalent surface coating of conventional nitinol stents with a cyclic RGD (cRGD) peptide highly specific for integrin alpha v beta 3 might foster endothelialization after stent implantation. A selective cRGD peptide was irreversibly immobilized onto titanium oxide-rich nitinol coupons or self-expanding stents. Functionality of the engrafted RGD peptide was demonstrated using in vitro endothelial bioassays. A subsequent 7-day in vivo endothelialization study was performed using cRGD-coated self-expanding nitinol stents in rabbits. cRGD peptide coating effectively promoted endothelial cell anchorage, migration, and proliferation confirmed by increased focal adhesions. Proof-of-concept studies of rabbit cRGD stent implants showed a significant increase in endothelial coverage above stent struts relative to stents coated with BSA (cRGD = 70.1 ± 21.9 vs. BSA = 49.9 ± 21.8%, p < 0.03). Immobilization of cRGD peptides on strut surfaces represents an innovative strategy to improve endothelialization, which may facilitate vascular healing after stent implantation.     

Functionalized self-assembling peptide nanofiber hydrogels mimic stem cell niche to control human adipose stem cell behavior in vitro

A class of designer functionalized self-assembling peptide nanofiber scaffolds developed from self-assembling peptide RADA16-I (AcN-RADARADARADARADA-CONH₂) has become increasingly attractive not only for studying spatial behaviors of cells, but also for developing approaches for a wide range of medical applications including regenerative medicine, rapid hemostasis and cell therapy. In this study, we report three functionalized self-assembling peptide hydrogels that serve as a three-dimensional (3-D) artificial microenvironment to control human adipose stem cell (hASC) behavior in vitro. Short peptide motifs SKPPGTSS (bone marrow homing motif), FHRRIKA (heparin-binding motif) and PRGDSGYRGDS (two-unit RGD cell adhesion motif) were used to extend the C-terminus of RADA16-I to obtain functionalized peptides. Atomic force microscopy confirmed the formation of self-assembling nanofibers in the mixture of RADA16-I peptide and functionalized peptides. The behaviors of hASCs cultured in 3-D peptide hydrogels, including migration, proliferation and growth factor-secretion ability, were studied. Our results showed that the functionalized peptide hydrogels were suitable 3-D scaffolds for hASC growth with higher cell proliferation, migration and the secretion of angiogenic growth factors compared with tissue culture plates and pure RADA16-I scaffolds. The present study suggests that these functionalized designer peptide hydrogels not only have promising applications for diverse tissue engineering and regenerative medicine applications as stem cell delivery vehicles, but also could be a biomimetic 3-D system to study nanobiomaterial–stem cell interactions and to direct stem cell behaviors.     

精氨酸-甘氨酸-天冬氨酸肽类似物与新生血管内皮靶向治疗

背景：血管内皮是缺血、血栓、炎症、水肿、氧化应激等病理损伤中的重要部位,选择特异性的内皮细胞靶点成为药物介入治疗的关键。 目的：分析和总结近年来精氨酸-甘氨酸-天冬氨酸肽及精氨酸-甘氨酸-天冬氨酸多肽类似物作为特异性的内皮细胞靶点的研究。 方法：分别以“RGD、整合素、靶向治疗”,“RGD、integrin 、targeted therapy” 为检索词,应用计算机检索Pubmed 数据库1998年1月至2011年12月有关文章。纳入有关血管新生的文献。排除与研究目的无关和内容重复者。保留42篇文献做进一步分析。 结果与结论：整合素αvβ3是内皮细胞病理损伤及血管新生时的特异靶点,参与内皮细胞的迁移、增殖、分化过程。精氨酸-甘氨酸-天冬氨酸肽及精氨酸-甘氨酸-天冬氨酸多肽类似物作为整合素和其配体相互作用的识别位点,能结合肿瘤或者病理损伤时新生血管表达增高的整合素αvβ3,介导细胞与细胞外基质及细胞之间的相互作用,可在新生血管显影、靶向药物递送、载体材料修饰中发挥重要作用。     

Covalently immobilized RGD gradient on PEG hydrogel scaffold influences cell migration parameters

Understanding the influence of a controlled spatial distribution of biological cues on cell activities can be useful to design “cell instructive” materials, able to control and guide the formation of engineered tissues in vivo and in vitro. To this purpose, biochemical and mechanical properties of the resulting biomaterial must be carefully designed and controlled. In this work, the effect of covalently immobilized RGD peptide gradients on poly(ethylene glycol) diacrylate hydrogels on cell behaviour was studied. We set up a mechanical device generating gradients based on a fluidic chamber. Cell response to RGD gradients with different slope (0.7, 1 and 2 mM cm^?1) was qualitatively and quantitatively assessed by evaluating cell adhesion and, in particular, cell migration, compared to cells seeded on hydrogels with uniform distribution of RGD peptides. To evaluate the influence of RGD gradient and to exclude any concentration effect on cell response, all analyses were carried out in a specific region of the gradients which displayed the same average concentration of RGD (1.5 mM). Results suggest that cells recognize the RGD gradient and adhere onto it assuming a stretched shape. Moreover, cells tend to migrate in the direction of the gradient, as their speed is higher than that of cells migrating on hydrogels with a uniform distribution of RGD and increases by increasing RGD gradient steepness. This increment is due to an augmentation of bias speed component of the mean squared speed, that is, the drift of the cell population migrating on the anisotropic surface provided by the RGD gradient.     

Inhibition of angiogenesis in vitro by Arg-Gly-Asp-containing synthetic peptide.

This study was designed to evaluate the effect of the synthetic peptide Gly-Arg-Gly-Asp-Ser (GRGDS) on angiogenesis in serum-free collagen gel culture of rat aorta. The GRGDS peptide contains the amino acid sequence Arg-Gly-Asp (RGD), which has been implicated as a recognition site in interactions between extracellular matrix (ECM) molecules and cell membrane receptors. RGD-containing synthetic peptides are known to inhibit attachment of endothelial cells to substrates, but their effect on angiogenesis has not been fully characterized. Aortic explants embedded in collagen gel in the absence of GRGDS generated branching microvessels through a process of endothelial migration and proliferation. Addition of GRGDS to the culture medium caused a marked inhibition of angiogenesis. In contrast, GRGES, a control peptide lacking the RGD sequence, failed to inhibit angiogenesis. The inhibitory effect of GRGDS was nontoxic and reversible. The angiogenic activity of aortic explants previously inhibited with GRGDS could be restored by incubating the cultures in GRGDS-free medium. These findings suggest that angiogenesis is an anchorage-dependent process that can be inhibited by interfering with the attachment of endothelial cells to the ECM. It also indicates that synthetic peptides can be used as probes to study the mechanisms by which the ECM regulates angiogenesis.     

RGD肽对内皮细胞在聚酯材料表面粘附、增殖的影响

RGD是许多粘附蛋白结构中的高度保守序列，与细胞在生物材料表面的粘附、增殖密切相关。本研究在聚酯薄膜表面分别预衬纤维粘连蛋白和共价接枝RGD三肽，然后在不同聚酯材料上种植体外培养的人脐静脉内皮细胞，结果显示RGD可明显促进细胞在材料表面的粘附和增殖，与纤维粘连蛋白相比，RGD促进细胞粘附的作用更为明显，而在细胞增殖方面，二者的作用无显著性差异。本研究为改进生物材料的表面设计，促进心血管移植物的内皮化提供了一个切实可行的思路。     

Three-dimensional synthetic niche components to control germ cell proliferation

Spermatogonial stem cells (SSCs) are increasingly studied for potential use in tissue regeneration due to their ability to dedifferentiate into embryonic stem cell-like cells. For their successful therapeutic use, these cells must first be expanded in vitro using an appropriate culture system. We hypothesized that a hydrogel with proper biochemical and biomechanical properties may mimic the composition and structure of the native basement membrane onto which SSCs reside, thus allowing us to control SSC proliferation. This hypothesis was examined in two-dimensional (2D) and three-dimensional (3D) cultures using hydrogels formed from calcium cross-linked alginate molecules conjugated with synthetic oligopeptides containing the Arg-Gly-Asp sequence (RGD peptides). The RGD peptide density (N(RGD)) in gel matrices was controlled by mixing alginate molecules modified with RGD peptides and unmodified alginate molecules at varied ratios. The mechanical stiffness was controlled with the cross-linking density of gel matrices. Interestingly, the RGD peptide density modulated cell proliferation in both 2D and 3D cultures as well as the number and size of SSC colonies formed in 3D cultures. In contrast, cell proliferation was minimally influenced by mechanical stiffness in 2D cultures. Overall, the results of this study elucidate an important factor regulating SSC proliferation and also present a bioactive hydrogel that can be used as a 3D synthetic basement membrane. In addition, the results of this study will be broadly useful in controlling the proliferation of various stem cells.     

Protein polymer hydrogels by in situ, rapid and reversible self-gelation

Protein-based biomaterials are an important class of materials for applications in biotechnology and medicine. The exquisite control of their composition, stereochemistry, and chain length offers unique opportunities to engineer biofunctionality, biocompatibility, and biodegradability into these materials. Here, we report the synthesis of a thermally responsive peptide polymer-based hydrogel composed of a recombinant elastin-like polypeptide (ELP) that rapidly forms a reversibly cross-linked hydrogel by the formation of intermolecular disulfide cross-links. To do so, we designed and synthesized ELPs that incorporate periodic cysteine residues (cELPs), and show that cELPs are thermally responsive protein polymers that display rapid gelation under physiologically relevant, mild oxidative conditions. Gelation of cELPs, at concentrations as low as 2.5 wt%, occurs in ≈ 2.5 min upon addition a low concentration of hydrogen peroxide (0.3 wt%). We show the utility of these hydrogels for the sustained release of a model protein in vitro, and demonstrate the ability of this injectable biomaterial to pervade tumors to maximize tumor coverage and retention time upon intratumoral injection. cELPs represent a new class of injectable reversibly cross-linked hydrogels with properties intermediate between ELP coacervates and chemically cross-linked ELP hydrogels that will find useful applications in drug delivery and tissue engineering.     

Study of bilineage differentiation of human-bone-marrow-derived mesenchymal stem cells in oxidized sodium alginate/N-succinyl chitosan hydrogels and synergistic effects of RGD modification and low-intensity pulsed ultrasound

The level of formation of new bone and vascularization in bone tissue engineering scaffold implants is considered as a critical factor for clinical application. In this study, an approach using an RGD-grafted oxidized sodium alginate/N-succinyl chitosan (RGD–OSA/NSC) hydrogel as a scaffold and low-intensity pulsed ultrasound (LIPUS) as mechanical stimulation was proposed to achieve a high level of formation of new bone and vascularization. An in vitro study of endothelial and osteogenic differentiations of human-bone-marrow-derived mesenchymal stem cells (hMSCs) was conducted to evaluate it. The results showed that RGD–OSA/NSC composite hydrogels presented good biological properties in attachment, proliferation and differentiation of cells. The MTT cell viability assay showed that the total number of cells increased more significantly in the LIPUS-stimulated groups with RGD than that in the control ones; similar results were obtained for alkaline phosphatase activity/staining and mineralized nodule formation assay of osteogenic induction and immunohistochemical test of endothelial induction. The positive synergistic effect of LIPUS and RGD on the enhancement of proliferation and differentiation of hMSCs was observed. These findings suggest that the hybrid use of RGD modification and LIPUS might provide one approach to achieve a high level of formation of new bone and vascularization in bone tissue engineering scaffold implants.     

Engineered endothelial cell adhesion via VCAM1 and E-selectin antibody-presenting alginate hydrogels

Materials that adhere to the endothelial cell (EC) lining of blood vessels may be useful for treating vascular injury. Cell adhesion molecules (CAMs), such as endothelial leukocyte adhesion molecule-1 (E-selectin) and vascular cell adhesion molecule-1 (VCAM1), modulate EC-leukocyte interactions. In this study, we mimicked cell-cell interactions by seeding cells on alginate hydrogels modified with antibodies against E-selectin and VCAM1, which are upregulated during inflammation. ECs were activated with interleukin-1α to increase CAM expression and subsequently seeded onto hydrogels. The strength of cell adhesion onto gels was assessed via a centrifugation assay. Strong, cooperative EC adhesion was observed on hydrogels presenting a 1:1 ratio of anti-VCAM1:anti-E-selectin. Cell adhesion was stronger on dual functionalized gels than on gels modified with anti-VCAM1, anti-E-selectin or the arginine-glycine-aspartic acid (RGD) peptide alone. Anti-VCAM1:anti-E-selectin-modified hydrogels may be engineered to adhere the endothelium cooperatively.     

Self-assembled peptide-based hydrogels as scaffolds for anchorage-dependent cells

We report here the design of a biomimetic nanofibrous hydrogel as a 3D-scaffold for anchorage-dependent cells. The peptide-based bioactive hydrogel is formed through molecular self-assembly and the building blocks are a mixture of two aromatic short peptide derivatives: Fmoc-FF (Fluorenylmethoxycarbonyl-diphenylalanine) and Fmoc-RGD (arginine-glycine-aspartate) as the simplest self-assembling moieties reported so far for the construction of small-molecule-based bioactive hydrogels. This hydrogel provides a highly hydrated, stiff and nanofibrous hydrogel network that uniquely presents bioactive ligands at the fibre surface; therefore it mimics certain essential features of the extracellular matrix. The RGD sequence as part of the Fmoc-RGD building block plays a dual role of a structural component and a biological ligand. Spectroscopic and imaging analysis using CD, FTIR, fluorescence, TEM and AFM confirmed that FF and RGD peptide sequences self-assemble into β-sheets interlocked by π–π stacking of the Fmoc groups. This generates the cylindrical nanofibres interwoven within the hydrogel with the presence of RGDs in tunable densities on the fibre surfaces. This rapid gelling material was observed to promote adhesion of encapsulated dermal fibroblasts through specific RGD–integrin binding, with subsequent cell spreading and proliferation; therefore it may offer an economical model scaffold to 3D-culture other anchorage-dependent cells for in-vitro tissue regeneration.     

Enzymatic conjugation of a bioactive peptide into an injectable hyaluronic acid–tyramine hydrogel system to promote the formation of functional vasculature

In this study, one-step enzyme-mediated preparation of a multi-functional injectable hyaluronic-acid-based hydrogel system is reported. Hydrogel was formed through the in situ coupling of phenol moieties by horseradish peroxidase (HRP) and hydrogen peroxide (H₂O₂), and bioactive peptides were simultaneously conjugated into the hydrogel during the gel formation process. The preparation of this multi-functional hydrogel was made possible by synthesizing peptides containing phenols which could couple with the phenol moieties of hyaluronic-acid–tyramine (HA–Tyr) during the HRP-mediated crosslinking reaction. Preliminary studies demonstrated that two phenol moieties per molecule resulted in a consistently high degree of conjugation into the HA–Tyr hydrogel network, unlike the one modified with one phenol moiety per molecule. Therefore, an Arg–Gly–Asp (RGD) peptide bearing two phenol moieties (phenol₂–poly(ethylene glycol)–RGD) was designed for conjugation to endow the HA–Tyr hydrogel with adhesion signals and enhance its bioactivities. Human umbilical vein endothelial cells (HUVECs) cultured on or within the RGD-modified hydrogels showed significantly different adhesion behavior, from non-adherence on the HA–Tyr hydrogel to strong adhesion on hydrogels modified with phenol₂–poly(ethylene glycol)–RGD. This altered cell adhesion behavior led to improved cell proliferation, migration and formation of capillary-like network in the hydrogel in vitro. More importantly, when HUVECs and human fibroblasts (HFF1) were encapsulated together in the RGD-modified HA–Tyr hydrogel, functional vasculature was observed inside the cell-laden gel after 2 weeks in the subcutaneous tissue. Taken together, the in situ conjugation of phenol₂–poly(ethylene glycol)–RGD into HA–Tyr hydrogel system, coupled with the ease of incorporating cells, offers a simple and effective means to introduce biological signals for preparation of multi-functional injectable hydrogels for tissue engineering application.     

The promotion of microvasculature formation in poly(ethylene glycol) diacrylate hydrogels by an immobilized VEGF-mimetic peptide

Microvascularization of tissue engineered constructs was achieved by utilizing a VEGF-mimicking peptide, QK, covalently bound to a poly(ethylene glycol) hydrogel matrix. The 15-amino acid peptide, developed by D'Andrea et al., was modified with a PEG-succinimidyl ester linker on the N-terminus of the peptide, then photocrosslinked onto the surface or throughout PEG hydrogels. PEGylation of the peptide increased its solubility and bioactivity, as evidenced by endothelial cell proliferation. PEG-QK showed equal or superior ability to promote angiogenesis in vitro, on the surface of hydrogels and within three-dimensional collagenase-degradable hydrogels, compared to RGDS only or PEG-VEGF hydrogels. Endothelial cells were shown to form tubule structures, migrate, and make cell-cell contacts in response to covalently-bound PEG-QK. In vivo in a mouse cornea micropocket angiogenesis assay, PEG-QK hydrogels promoted more complete coverage of host microvasculature within the hydrogel. PEG-QK was shown to enhance vessel branch points and vessel density as well as space filling properties of fractal dimension and lacunarity. This report shows the ability to promote angiogenesis in tissue engineered constructs using a covalently-bound small peptide rather than a large protein and may point to an advance in designing biomimetic cellular environments.     

Covalently-Immobilized Vascular Endothelial Growth Factor Promotes Endothelial Cell Tubulogenesis in Poly(ethylene glycol) Diacrylate Hydrogels

The development and use of functional tissue-engineered products is currently limited by the challenge of incorporating microvasculature. To this end, we have investigated strategies to facilitate vascularization in scaffold materials, in this case poly(ethylene glycol) (PEG) hydrogels. These hydrogels are hydrophilic and resist protein adsorption and subsequent non-specific cell adhesion, but can be modified to contain cell-adhesive ligands and growth factors to support cell and tissue function. Additionally, the hydrogel matrix can include proteolytically degradable peptide sequences in the backbone of the structure to allow cells to control scaffold biodegradation, allowing three-dimensional migration. Vascular endothelial growth factor (VEGF), a potent angiogenic signal, and the cell-adhesive peptide RGDS were each covalently attached to PEG monoacrylate linkers. PEGylated RGDS and VEGF were then covalently immobilized in PEG-diacrylate (PEGDA) hydrogels in 2D and 3D. Immobilized VEGF increased endothelial cell tubulogenesis on the surface of non-degradable PEGDA hydrogels 4-fold compared to controls without the growth factor. Endothelial cell behavior in 3D collagenase-degradable hydrogels modified with RGDS and VEGF was observed using time-lapse confocal microscopy. Bulk immobilization of VEGF in 3D collagenase-degradable RGDS-modified hydrogels increased endothelial cell motility 14-fold and cell–cell connections 3-fold. Covalent incorporation of PEGylated VEGF in PEG hydrogels can be a useful tool to promote endothelial cell migration, cell–cell contact formation and tubulogenesis in an effort to produce vascularized tissue-engineered constructs.     

肿瘤血管靶向噬菌体展示肽的研究进展

肿瘤血管表达有正常血管内皮细胞没有或微量表达的蛋白,由于它们具有特征性的结构,故用噬菌体展示技术可以筛选出针对这些蛋白的特异性识别多肽。用此类肿瘤特异性识别多肽如RGD、NGR等作为抗肿瘤药物治疗的靶向分子,将其与药物、纳米颗粒或脂质体等结合起来,由此制备的纳米药物有望明显的抑制肿瘤的生长,并极大程度地减少化疗药物的毒副作用。除此之外,此类多肽还可用于肿瘤血管影像检测等领域的应用。     

人脐静脉内皮细胞在RGD肽聚酯材料表面的黏附稳定性研究

研究RGD肽对内皮细胞(Endothelialcell,EC)在生物材料表面黏附稳定性的影响。实验材料(聚酯)分为三组:RGD组(表面共价接枝人工合成的RGD三肽)、对照组(表面预衬纤维粘连蛋白)和空白组(表面未作任何处理),然后在三组材料表面种植体外培养的人脐静脉内皮细胞,并在定常流条件下观察比较RGD肽和纤维粘连蛋白对材料表面细胞黏附稳定性的影响。结果显示随着剪切力作用时间延长和剪切力加大,三组材料表面黏附的细胞脱落逐渐增多。空白组PET表面细胞脱落最为明显,8.19dyne/cm2作用4h后,材料表面细胞残留率仅为13.73%。PET表面结合RGD或纤维粘连蛋白后,细胞残留率明显增加,同样剪切力作用下细胞残留率分别为43.33%和40.75%,两组之间无显著性差异。由此得出结论,RGD可以提高EC在材料表面的黏附稳定性。本结果仅是一个体外实验的初步结果,需要进一步的体内实验加以证实。