Encapsulated Neural Stem Cell Neuronal Differentiation in Fluorinated Methacrylamide Chitosan Hydrogels

Neural stem/progenitor cells (NSPCs) are able to differentiate into the primary cell types (neurons, oligodendrocytes and astrocytes) of the adult nervous system. This attractive property of NSPCs offers a potential solution for neural regeneration. 3D implantable scaffolds should mimic the microstructure and dynamic properties found in vivo, enabling the natural exchange of oxygen, nutrients, and growth factors for cell survival and differentiation. We have previously reported a new class of materials consisting of perfluorocarbons (PFCs) conjugated to methacrylamide chitosan (MAC), which possess the ability to repeatedly take-up and release oxygen at beneficial levels for favorable cell metabolism and proliferation. In this study, the neuronal differentiation responses of NSPCs to fluorinated methacrylamide chitosan (MACF) hydrogels were studied for 8 days. Two treatments, with oxygen reloading or without oxygen reloading, were performed during culture. Oxygen concentration distributions within cell-seeded MACF hydrogels were found to have higher concentrations of oxygen at the edge of the hydrogels and less severe drops in O₂ gradient as compared with MAC hydrogel controls. Total cell number was enhanced in MACF hydrogels as the number of conjugated fluorines via PFC substitution increased. Additionally, all MACF hydrogels supported significantly more cells than MAC controls (p < 0.001). At day 8, MACF hydrogels displayed significantly greater neuronal differentiation than MAC controls (p = 0.001), and among MACF groups methacrylamide chitosan with 15 fluorines per addition (MAC(Ali15)F) demonstrated the best ability to promote NSPC differentiation.     

Differentiation of neural stem cells in three-dimensional growth factor-immobilized chitosan hydrogel scaffolds

The adult central nervous system (CNS) contains adult neural stem/progenitor cells (NSPCs) that possess the ability to differentiate into the primary cell types found in the CNS and to regenerate lost or damaged tissue. The ability to specifically and spatially control differentiation is vital to enable cell-based CNS regenerative strategies. Here we describe the development of a protein-biomaterial system that allows rapid, stable and homogenous linking of a growth factor to a photocrosslinkable material. A bioactive recombinant fusion protein incorporating pro-neural rat interferon-γ (rIFN-γ) and the AviTag for biotinylation was successfully expressed in Escherichia coli and purified. The photocrosslinkable biopolymer, methacrylamide chitosan (MAC), was thiolated, allowing conjugation of maleimide-strepatavidin via Michael-type addition. We demonstrated that biotin-rIFN-γ binds specifically to MAC-streptavidin in stoichiometric yields at 100 and 200 ng/mL in photocrosslinked hydrogels. For cell studies, NSPCs were photo-encapsulated in 100 ng/mL biotin-rIFN-γ immobilized MAC based scaffolds and compared to similar NSPC-seeded scaffolds combining 100 ng/mL soluble biotin-rIFN-γ vs. no growth factor. Cells were cultured for 8 days after which differentiation was assayed using immunohistochemistry for lineage specific markers. Quantification showed that immobilized biotin-rIFN-γ promoted neuronal differentiation (72.8 ± 16.0%) similar to soluble biotin-rIFN-γ (71.8 ± 13.2%). The percentage of nestin-positive (stem/progenitor) cells as well as RIP-positive (oligodendrocyte) cells were significantly higher in scaffolds with soluble vs. immobilized biotin-rIFN-γ suggesting that 3-D immobilization results in a more committed lineage specification.     

Control of three-dimensional substrate stiffness to manipulate mesenchymal stem cell fate toward neuronal or glial lineages

The unlimited self-renewal and multipotency of stem cells provide great potential for applications in tissue engineering and regenerative medicine. The differentiation of stem cells can be induced by multiple factors including physical, chemical and biological cues. The fate of stem cells can be manipulated by deliberately controlling the interaction between stem cells and their microenvironment. The purpose of this study is to investigate the change in matrix stiffness under the influence of neurogenic differentiation of human mesenchymal stem cells (hMSCs). In this study, three-dimensional (3-D) porous scaffolds were synthesized by type I collagen (Col) and hyaluronic acid (HA). The elastic modulus of the 3-D substrates was modified by adjusting the concentration of 1-ethyl-3(3-dimethylaminopropyl) carbodiimide (EDC) as a crosslinking agent. The mechanical properties of Col–HA scaffolds were evaluated and the induction and characterization of hMSC differentiation toward neural lineages on substrates with different stiffnesses were studied. Using EDC of different concentrations for crosslinking, the stiffness of the matrices can be controlled in the range of 1–10 kPa for soft to stiff substrates, respectively. The results showed that MSCs were likely to differentiate into neuronal lineage in substrate at 1 kPa, while they transformed into glial cells in matrix at 10 kPa. The morphology and proliferation behavior of hMSCs responded to the different stiffnesses of substrates. Using this modifiable matrix, we can investigate the relationship between stem cell behavior and substrate mechanical properties in extracellular matrix-based biomimetic 3-D scaffolds. A substrate with controllable stiffness capable of inducing hMSCs specifically toward neuronal differentiation may be very useful as a tissue-engineered construct or substitute for delivering hMSCs into the brain and spinal cord.     

A neural stem/precursor cell monolayer for neural tissue engineering

The purpose of this study was to prepare a monolayer of neural stem/precursor cells (NSPCs) for neural tissue engineering applications. Two components present in serum, fibronectin and epidermal growth factor (EGF) were added into DMEM/F12 medium (termed medium B) to examine the effect of the migration-, proliferation- and differentiation-promoting potential on the cultured NSPCs, isolated from embryonic rat cerebral cortex. Compared with the serum effect, medium B also permitted neurosphere attachment onto the substrate surface and cell migration out of neurospheres extensively, but enhanced more extensive cell division and slowed down NSPC differentiation to generate a confluent NSPC monolayer. It was found the medium B-treated NSPCs possessed the capability to form typical neurospheres or to undergo differentiation into neuron-related cell types on various biomaterial surfaces. Therefore, we proposed a two-stage process for wound healing or nerve conduit preparation. Extensive NSPC division and MAP2-positive neuron differentiation were manipulated in NSPCs cultured in the medium B followed by the neuronal differentiation-favorable medium. These results should be useful for controlling the proliferation and differentiation of NSPCs on various biomaterials and conduits in neuroscience research.     

In vivo assessment of guided neural stem cell differentiation in growth factor immobilized chitosan-based hydrogel scaffolds

In this study, we demonstrate that a unique growth factor-biomaterial system can offer spatial control of growth factors with sustained signaling to guide the specific lineage commitment of neural stem/progenitor cells (NSPCs) in vivo. First, recombinant fusion proteins incorporating an N-terminal biotin tag and interferon-γ (IFN-γ), platelet derived growth factor-AA (PDGF-AA), or bone morphogenic protein-2 (BMP-2) were immobilized to a methacrylamide chitosan (MAC) based biopolymer via a streptavidin linker to specify NSPC differentiation into neurons, oligodendrocytes, or astrocytes, respectively. MAC was mixed with growth factors (immobilized or adsorbed), acrylated laminin, NSPCs, and crosslinked within chitosan conduits. This system mimics regenerative aspects of the central nervous system ECM, which is largely composed of a crosslinked polysaccharide matrix with cell-adhesive regions, and adds the new functionality of protein sequestration. We demonstrated that these growth factors are maintained at functionally significant levels for 28 d in vitro. In the main study, immobilized treatments were compared to absorbed and control treatments after 28 d in vivo (rat subcutaneous). Masson's Trichrome staining revealed that small collagen capsules formed around the chitosan conduits with an average acceptable thickness of 153.07 ± 6.02 μm for all groups. ED-1 staining showed mild macrophage clustering around the outside of chitosan conduits in all treatments with no macrophage invasion into hydrogel portions. Importantly, NSPC differentiation staining demonstrated that immobilized growth factors induced the majority of cells to differentiate into the desired cell types as compared with adsorbed growth factor treatments and controls by day 28. Interestingly, immobilized IFN-γ resulted in neural rosette-like arrangements and even structures resembling neural tubes, suggesting this treatment can lead to guided dedifferentiation and subsequent neurulation.     

Creating stiffness gradient polyvinyl alcohol hydrogel using a simple gradual freezing–thawing method to investigate stem cell differentiation behaviors

Polyvinyl alcohol (PVA) cylindrical hydrogel with a stiffness gradient was prepared using a simple liquid nitrogen (LN₂)-contacting gradual freezing and thawing method in order to investigate the effects of substrate stiffness on stem cell differentiation into specific cell types. The prepared cylindrical PVA hydrogel showed a gradually increasing stiffness along the longitudinal direction from the top at approximately 1 kPa to the bottom (LN₂ contacted side) at approximately 24 kPa. From the in vitro culture of bone marrow stem cells, it was observed that each soft (∼1 kPa) and stiff (∼24 kPa) hydrogel section promotes effective neurogenesis and osteogenesis of the cells, respectively, with the tendency to gradually decrease toward the opposing characteristic's side. The stiffness gradient cylindrical PVA hydrogel fabricated using this simple gradual freezing and thawing method can be a useful tool for basic studies, including the determination of optimum stiffness ranges for a variety of stem cell differentiations, as well as the investigation of cell migration in terms of substrate stiffness.     

Dynamic cell culturing and its application to micropatterned, elastin-like protein-modified poly(N-isopropylacrylamide) scaffolds

In this study a tissue engineering scaffold was constructed from poly(N-isopropylacrylamide) (pNIPAM) to study the influence of strain on cell proliferation and differentiation. The effect of surface chemistry and topography on bone marrow mesenchymal stem cells was also investigated. Micropatterned pNIPAM films (channels with 10 μm groove width, 2 μm ridge width, 20 μm depth) were prepared by photopolymerization. The films were chemically modified by adsorption of a genetically engineered and temperature sensitive elastin-like protein (ELP). Dynamic conditions were generated by repeated temperature changes between 29 °C and 37 °C. ELP presence on the films enhanced initial cell attachment two fold (Day 1 cell number on films with ELP and without ELP were 27.6 × 10⁴ and 13.2 × 10⁴, respectively) but had no effect on proliferation in the long run. ELP was crucial for maintaining the cells attached on the surface in dynamic culturing (Day 7 cell numbers on the films with and without ELP were 81.4 × 10⁴ and 12.1 × 10⁴, respectively) and this enhanced the ability of pNIPAM films to transfer mechanical stress on the cells. Dynamic conditions improved cell proliferation (Day 21 cell numbers with dynamic and with static groups were 180.4 × 10⁴ and 157.7 × 10⁴, respectively) but decreased differentiation (Day 14 specific ALP values on the films of static and dynamic groups were 6.6 and 3.5 nmol/min/cell, respectively). Thus, a physically and chemically modified pNIPAM scaffold had a positive influence on the population of the scaffolds under dynamic culture conditions.     

Gallium nitride induces neuronal differentiation markers in neural stem/precursor cells derived from rat cerebral cortex

In the present study, gallium nitride (GaN) was used as a substrate to culture neural stem/precursor cells (NSPCs), isolated from embryonic rat cerebral cortex, to examine the effect of GaN on the behavior of NSPCs in the presence of basic fibroblast growth factor (bFGF) in serum-free medium. Morphological studies showed that neurospheres maintained their initial shape and formed many long and thick processes with the fasciculate feature on GaN. Immunocytochemical characterization showed that GaN could induce the differentiation of NSPCs into neurons and astrocytes. Compared to poly-d-lysine (PDL), the most common substrate used for culturing neurons, there was considerable expression of synapsin I for differentiated neurons on GaN, suggesting GaN could induce the differentiation of NSPCs towards the mature differentiated neurons. Western blot analysis showed that the suppression of glycogen synthase kinase-3β (GSK-3β) activity was one of the effects of GaN-promoted NSPC differentiation into neurons. Finally, compared to PDL, GaN could significantly improve cell survival to reduce cell death after long-term culture. These results suggest that GaN potentially has a combination of electric characteristics suitable for developing neuron and/or NSPC chip systems.     

Chondrogenic differentiation of rat MSCs on porous scaffolds of silk fibroin/chitosan blends

Adult bone marrow derived mesenchymal stem cells are undifferentiated, multipotential cells and have the potential to differentiate into multiple lineages like bone, cartilage or fat. In this study, polyelectrolyte complex silk fibroin/chitosan blended porous scaffolds were fabricated and examined for its ability to support in vitro chondrogenesis of mesenchymal stem cells. Silk fibroin matrices provide suitable substrate for cell attachment and proliferation while chitosan are promising biomaterial for cartilage repair due to it’s structurally resemblance with glycosaminoglycans. We compared the formation of cartilaginous tissue in the silk fibroin/chitosan blended scaffolds with rat mesenchymal stem cells and cultured in vitro for 3 weeks. Additionally, pure silk fibroin scaffolds of non-mulberry silkworm, Antheraea mylitta and mulberry silkworm, Bombyx mori were also utilized for comparative studies. The constructs were analyzed for cell attachment, proliferation, differentiation, histological and immunohistochemical evaluations. Silk fibroin/chitosan blended scaffolds supported the cell attachment and proliferation as indicated by SEM observation, Confocal microscopy and metabolic activities. Alcian Blue and Safranin O histochemistry and expression of collagen II indicated the maintenance of chondrogenic phenotype in the constructs after 3 weeks of culture. Glycosaminoglycans and collagen accumulated in all the scaffolds and was highest in silk fibroin/chitosan blended scaffolds and pure silk fibroin scaffolds of A. mylitta. Chondrogenic differentiation of MSCs in the silk fibroin/chitosan and pure silk fibroin scaffolds was evident by real-time PCR analysis for cartilage-specific ECM gene markers. The results represent silk fibroin/chitosan blended 3D scaffolds as suitable scaffold for mesenchymal stem cells-based cartilage repair.     

Efficient differentiation of stem cells encapsulated in a cytocompatible phospholipid polymer hydrogel with tunable physical properties

A large number of lineage-committed progenitor cells are required for advanced regenerative medicine based on cell engineering. Due to their ability to differentiate into multiple cells lines, multipotent stem cells have emerged as a vital source for generating transplantable cells for use in regenerative medicine. Increment in differentiation efficiency of the mesenchymal stem cell was obtained by using hydrogel to adjust the proliferation cycle of encapsulated cells to signal sensitive phase. Three dimensional (3-D) polymer networks composed of poly(2-methacyloyloxyethyl phosphorylcholine (MPC)-co-n-butyl methacrylate (BMA)-co-p-vinylphenylboronic acid (VPBA)) (PMBV) and poly(vinyl alcohol) (PVA) were prepared as a hydrogel. The proliferation of cells encapsulated in the PMBV/PVA hydrogel was highly sensitive to the storage modulus (G′) of the hydrogel. That is, when the G′ value of the hydrogel was higher than 1.0 kPa, the cell proliferation was ceased and the proliferation cycle of cells was converged to G1 phase, whereas when the G′ value was below 1.0 kPa, cell proliferation proceeded. By changing the G′ value of hydrogels under encapsulation the cells, proliferation cycle of encapsulated mesenchymal stem cells was regulated to G1 phase and thus signal sensitivity were increased. 3-D polymer networks as hydrogels with tunable physical properties can be effectively used to control proliferation and lineage-restricted differentiation of stem cells.     

The effect of topology of chitosan biomaterials on the differentiation and proliferation of neural stem cells

Neural stem cells (NSCs) are capable of self-renewal and differentiation into three principle central nervous system cell types under specific local microenvironments. Chitosan films (Chi-F), chitosan porous scaffolds (Chi-PS) and chitosan multimicrotubule conduits (Chi-MC) were used to investigate their effects on the differentiation and proliferation of NSCs isolated from the cortices of fetal rats. In the presence of 10% fetal bovine serum most NSCs cultured on Chi-F differentiated into astrocytes, NSCs cultured on Chi-MC showed a significant increase in neuronal differentiation, while Chi-PS somewhat promoted NSCs to differentiate into neurons. However, in serum-free medium with 20 ng ml^?1 basic fibroblast growth factor NSCs cultured on Chi-F showed the greatest proliferation, NSCs cultured on Chi-MC showed moderate cell proliferation, but NSCs cultured on Chi-PS exhibited the least cell proliferation. These observations indicate that chitosan topology can play an important role in regulating differentiation and proliferation of NSCs and raise the possibility of the utilization of chitosan in various structural biomaterials in neural tissue engineering.     

The osteogenic response of mesenchymal stem cells to an injectable PLGA bone regeneration system

The enrichment of substrates/surfaces with selected functional groups, methyl (–CH₃), allyl amine (–NH₂), allyl alcohol (–OH) and acrylic acid (–COOH), can be used to trigger mesenchymal stem (MSC) cell differentiation into specified lineages, minimising the need for exogenous biological supplementation. We present the successful translation of this research phenomenon to an injectable two phase injectable PLGA system, utilising plasma techniques, for the repair of bone defects. Modified microspheres were characterised using water contact angel (WCA), X-ray Photon Spectroscopy (XPS) and scanning electron microscopy (SEM). When cultured in contact with MSCs in vitro, the ability of the modified particles, within the 2 phase system, to induce differentiation was characterised using quantitative assays for cell viability and histological analysis for key markers of differentiation throughout the entirety of the three dimensional scaffold. Biological analysis proved that selected modified microspheres have the ability to induce MSC osteogenic (-NH₂ modified scaffolds) and chondrogenic (–OH modified scaffolds) differentiation throughout the entirety of the formed scaffold. Therefore optimised plasma modification of microspheres is an effective tool for the production of injectable systems for the repair of bone and cartilage defects.     

Cyclo-DfKRG peptide modulates in vitro and in vivo behavior of human osteoprogenitor cells on titanium alloys

The first aim of the present study was to investigate the capacity of a cyclo-DfKRG-coated hydroxyapatite–titanium alloy (Ti–HA–RGD) to activate in vitro human osteoprogenitor cells adhesion and differentiation. The second purpose was to examine in vivo the role of a autologous cell seeding on cyclo-DfKRG-functionalized materials to provide bone repair after implantation in femoral condyle of rabbits.Our in vitro results have demonstrated that both titanium alloy functionalized with hydroxyapatite (Ti–HA–RGD and Ti–HA) contributed to higher cell adhesion than titanium alloy alone respectively 85 and 55% vs 15% compared to tissue culture polystyrene after one hour of cell seeding.As for differentiation, after 3 days of culture, Ti–HA presented the highest increase of ALP mRNA of all surfaces studied. Ti–HA–RGD showed an intermediate value about half as high as Ti–HA. Moreover after 3 days, both Ti–HA and Ti–HA–RGD surfaces showed the highest increase of cbfa1 mRNA expression.Two weeks following implantation, in vivo findings revealed that percentage of lacunae contact observed with pre-cellularized Ti–HA–RGD samples remains significantly lower than with Ti–HA group (10.5 ± 9.6 % vs 33.7 ± 11.5 %, P < 0.03). Meanwhile, RGD peptide coating had no significant additional effect on the bone implant contact and area. Moreover, histomorphometry analysis revealed that implantation of pre-cellularized RGD coated materials with ROP cells increased significantly peri-implant fibrous area (24 ± 11.6% vs 3 ± 1.7% for Ti–HA–RGD, P < 0.02). RGD coatings demonstrated osteoblastic adhesion, differentiation and in vivo bone regeneration at most equivalent to HA coatings.     

Control of proliferation and osteogenic differentiation of human dental-pulp-derived stem cells by distinct surface structures

The ability to control the behavior of stem cells provides crucial benefits, for example, in tissue engineering and toxicity/drug screening, which utilize the stem cell’s capacity to engineer new tissues for regenerative purposes and the testing of new drugs in vitro. Recently, surface topography has been shown to influence stem cell differentiation; however, general trends are often difficult to establish due to differences in length scales, surface chemistries and detailed surface topographies. Here we apply a highly versatile screening approach to analyze the interplay of surface topographical parameters on cell attachment, morphology, proliferation and osteogenic differentiation of human mesenchymal dental-pulp-derived stem cells (DPSCs) cultured with and without osteogenic differentiation factors in the medium (ODM). Increasing the inter-pillar gap size from 1 to 6 μm for surfaces with small pillar sizes of 1 and 2 μm resulted in decreased proliferation and in more elongated cells with long pseudopodial protrusions. The same alterations of pillar topography, up to an inter-pillar gap size of 4 μm, also resulted in enhanced mineralization of DPSCs cultured without ODM, while no significant trend was observed for DPSCs cultured with ODM. Generally, cells cultured without ODM had a larger deposition of osteogenic markers on structured surfaces relative to the unstructured surfaces than what was found when culturing with ODM. We conclude that the topographical design of biomaterials can be optimized for the regulation of DPSC differentiation and speculate that the inclusion of ODM alters the ability of the cells to sense surface topographical cues. These results are essential in order to transfer the use of this highly proliferative, easily accessible stem cell into the clinic for use in cell therapy and regenerative medicine.     

Engineering surfaces for site-specific vascular differentiation of mouse embryonic stem cells

Differentiation of stem and progenitor cells routinely relies on the application of soluble growth factors, an approach that enables temporal control of cell fate but enables no spatial control of the differentiation process. Angiogenic progenitor cells derived from mouse embryonic stem cells (ESCs) were differentiated here according to the pattern of immobilized vascular endothelial growth factor-A (VEGF). Mouse ESCs engineered to express green fluorescent protein (eGFP) under control of promoter for the receptor tyrosine kinase Flk1 were used. The Flk1+ angiogenic progenitors were selected from day 3 differentiating embryoid bodies based on their expression of eGFP using fluorescence activated cell sorting. Mouse VEGF₁₆₅ was covalently immobilized onto collagen IV (ColIV) using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) chemistry. A non-cell adhesive layer of photocrosslinkable chitosan was first created, after which VEGF–ColIV was stamped as 100 μm wide lanes on top of the chitosan layer and the Flk1+ angiogenic progenitors were seeded for site-specific differentiation. Lanes stamped with only ColIV served as controls. The results presented here demonstrate that the cultivation of Flk1+ progenitors on surfaces with immobilized VEGF yielded primarily endothelial cells (53 ± 13% CD31 positive and 17 ± 2% smooth muscle actin positive), whereas surfaces without VEGF favored vascular smooth muscle-like cell differentiation (26 ± 17% CD31 positive and 38 ± 9% smooth muscle actin positive).     

The effects of interactive mechanical and biochemical niche signaling on osteogenic differentiation of adipose-derived stem cells using combinatorial hydrogels

Stem cells reside in a multi-factorial environment containing biochemical and mechanical signals. Changing biochemical signals in most scaffolds often leads to simultaneous changes in mechanical properties, which makes it difficult to elucidate the complex interplay between niche cues. Combinatorial studies on cell–material interactions have emerged as a tool to facilitate analyses of stem cell responses to various niche cues, but most studies to date have been performed on two-dimensional environments. Here we developed three-dimensional combinatorial hydrogels with independent control of biochemical and mechanical properties to facilitate analysis of interactive biochemical and mechanical signaling on adipose-derived stem cell osteogenesis in three dimensions. Our results suggest that scaffold biochemical and mechanical signals synergize only at specific combinations to promote bone differentiation. Leading compositions were identified to have intermediate stiffness (～55 kPa) and low concentration of fibronectin (10 μg ml^?1), which led to an increase in osteocalcin gene expression of over 130-fold. Our results suggest that scaffolds with independently tunable niche cues could provide a powerful tool for conducting mechanistic studies to decipher how complex niche cues regulate stem cell fate in three dimensions, and facilitate rapid identification of optimal niche cues that promote desirable cellular processes or tissue regeneration.     

Electrically polarized HAp-coated Ti: In vitro bone cell–material interactions

Electrically polarized bulk sintered hydroxyapatite (HAp) compacts have been shown to accelerate mineralization and bone tissue ingrowth in vivo. In this work, a comprehensive study has been carried out to investigate the influence of surface charge and polarity on in vitro bone cell adhesion, proliferation and differentiation on electrically polarized HAp-coated Ti. Uniform and crack free sol–gel derived HAp coatings of 20 ± 1.38 μm thickness were polarized by application of an external d.c. field of 2.0 kV cm^?1 at 400 °C for 1h. In vitro bioactivity of polarized HAp coatings was evaluated by soaking in simulated body fluid, and bone cell–material interactions were studied by culturing with human fetal osteoblast cells (hFOB) for a maximum period of 11 days. Scanning electron microscopic observation showed that accelerated mineralization on negatively charged surfaces favored rapid cell attachment and faster tissue ingrowth over non-polarized HAp coating surfaces, while positive charge on HAp coating surfaces restricted apatite nucleation with limited cellular response. Immunochemistry and confocal microscopy confirmed that the cell adhesion and early stage differentiation were more pronounced on negatively charged coating surfaces as hFOB cells expressed higher vinculin and alkaline phosphatase proteins on negatively charged surface compared to cells grown on all other surfaces. Our results in this study are process independent and potentially applicable to any other commercially available coating techniques.     

Chitosan–gelatin scaffolds for tissue engineering: Physico-chemical properties and biological response of buffalo embryonic stem cells and transfectant of GFP–buffalo embryonic stem cells

The favorable cellular response of newly developed cell line, buffalo embryonic stem (ES) cells to three-dimensional biodegradable chitosan–gelatin composite scaffolds with regard to stem-cell-based tissue engineering is described. Chitosan–gelatin composites were characterized by a highly porous structure with interconnected pores, and the mechanical properties were significantly enhanced. Furthermore, X-ray diffraction study indicated increased amorphous content in the scaffold on the addition of gelatin to chitosan. To develop a transfectant of green fluorescence protein (GFP)–buffalo ES cell, transfection of GFP plasmid to the cell was carried out via the electroporation procedure. In comparison with pure chitosan, cell spreading and proliferation were greater in highly visualized GFP-expressing cell–chitosan–gelatin scaffold constructs. The relative comparison of biological response involving cell proliferation and viability on the scaffolds suggests that blending of gelatin in chitosan improved cellular efficiency. Studies involving scanning electron and fluorescence microscopy, histological observations and flow cytometer analysis of the constructs implied that the polygonal cells attached to and penetrated the pores, and proliferated well, while maintaining their pluripotency during the culture period for 28 days. Chitosan–gelatin scaffolds were cytocompatible with respect to buffalo ES cells. The study underscores for the first time that chitosan–gelatin scaffolds are promising candidates for ES-cell-based tissue engineering.