托伐普坦固体分散体的制备及体外溶出特性考察

目的 采用固体分散技术提高难溶性药物托伐普坦的体外溶出度。方法 选用聚维酮K_29/32为载体材料,以溶剂蒸发法制备托伐普坦固体分散体。采用差示扫描量热法(DSC)、X-射线粉末衍射法(XRPD)对所得固体分散体进行鉴定, 并进行溶解度、体外溶出实验。结果 固体分散体的DSC 图谱及X-射线粉末衍射确定了托伐普坦以无定形态分散在载体中, 体外溶解实验表明其溶出较原料药、物理混合物均有明显提高。结论 将托伐普坦与PVP K_29/32制成固体分散体,其分散状态发生了改变,溶出性能明显提高。     

Anomalous properties of spray dried solid dispersions

The use of solid dispersions for oral dosage forms can increase the dissolution rate of poorly soluble drugs. Spray drying is one process that can be used to prepare solid dispersions. Spray dried solid dispersions of griseofulvin, poly[N-(2-hydroxypropyl)methacrylate] (PHPMA) and polyvinylpyrrolidone (PVP) were prepared from acetone and water. When methanol was substituted for water, the morphology, stability and dissolution properties of the solid dispersion changed dramatically. The glass transition temperature for the ternary solid dispersion (GF, PHPMA, and PVP) shifted from 83°C (acetone/water) to 103°C for the acetone/methanol system. These differences in the dispersions are thought to derive from conformational variations of the polymers in solution prior to spray drying. Both PHPMA and PVP formed globules in solution of a size range between 16 and 33 nm. The effect of drug and polymer concentration in solution (before spray drying) on the properties of the solid dispersion was studied. It was found that solid dispersions that were prepared using lower concentrations of drug and polymers in solutions resulted in the formation of particles that display a lower relaxation rate. This result supports the hypothesis that the polymer conformation may significantly change the properties of the solid dispersion. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 98:4724–4737, 2009     

An Investigation into the Effect of Spray Drying Temperature and Atomizing Conditions on Miscibility,Physical Stability,and Performance of Naproxen–PVP K 25 Solid Dispersions

The present study investigates the effect of changing spray drying temperature (40°C–120°C) and/or atomizing airflow rate (AR; 5–15 L/min) on the phase structure, physical stability, and performance of spray-dried naproxen–polyvinylpyrrolidone (PVP) K25 amorphous solid dispersions. The modulated differential scanning calorimetry, attenuated total internal reflectance-Fourier transform infrared, and powder X-ray diffractometry (pXRD) studies revealed that higher inlet temperature (IT) or atomization airflow leads to the formation of amorphous-phase-separated dispersions with higher strongly H-bonded and free PVP fractions, whereas that prepared with the lowest IT was more homogeneous. The dispersion prepared with the lowest atomization AR showed trace crystallinity. Upon exposure to 75% relative humidity (RH) for 3 weeks, the phase-separated dispersions generated by spray drying at higher temperature or higher atomization airflow retained relatively higher amorphous drug fraction compared with those prepared at slow evaporation conditions. The humidity-controlled pXRD analysis at 98% RH showed that the dispersion prepared with highest atomization AR displayed the slowest kinetics of recrystallization. The molecular-level changes occurring during recrystallization at 98% RH was elucidated by spectroscopic monitoring at the same humidity. The rate and extent of the drug dissolution was the highest for dispersions prepared at the highest atomizing AR and the lowest for that prepared with the slowest atomizing condition.     

Enhanced dissolution rate of celecoxib using PVP and/or HPMC-based solid dispersions prepared by spray drying method

Celecoxib with low solubility and high permeability (BCS class II) in water is a non-steroidal anti-inflammatory drug used in the treatment of pain and inflammation, associated with rheumatoid arthritis, and several other inflammatory disorders. Also, it is a selective cyclooxygenase 2 inhibitor with low water solubility and high crystallinity. The objective of this study was to improve dissolution rate of celecoxib which was water-insoluble drug. Solid dispersions were prepared by spray drying as the solvent evaporation method. The dissolution behavior of solid dispersions was compared with Celebrex^® (Pfizer) as a control group in simulated gastric juice (pH 1.2, 0.5 % SLS. The characterization of the prepared solid dispersions is analyzed by scanning electron microscope, powder X-ray diffractometer, Fourier transform infrared spectroscopy and reverse phase-high performance liquid chromatography The best formulation was SD 8 in this study. It was the cumulative release of 97 % at 120 min. This study suggests that the solubility and bioavailability of poorly water-soluble celecoxib improved through the prepared solid dispersions by spray drying method.     

盐酸溴己新固体分散体制备及体外溶出实验

目的制备盐酸溴己新（BH）固体分散体并研究其体外溶出度。方法以聚乙烯吡咯烷酮（PVP）为载体,采用喷雾干燥法制备难溶性药物盐酸溴己新固体分散体,并进行体外溶出实验。结果制备成的固体分散体能显著提高盐酸溴己新的体外溶出速率,PVPk-15载体的固体分散体溶出较PVPk-30载体的固体分散体快。随着PVPk-15载体比例增加,固体分散体的溶出先增大后减小,BH-PVPk-15为1∶5时的固体分散体具有良好的体外速释作用。结论将盐酸溴己新制成固体分散体能明显提高其溶解度及体外释放速率。     

Studies on Flash Evaporation for Preparation of Porous Solid Dispersions Using Piroxicam as a Model Drug

An amalgamation of solid dispersion and capillarity has been attempted in present study for enhancement of dissolution rate of poorly soluble drugs. Flash evaporation technique was utilized for enhancement of the dissolution rate of piroxicam. One of the major problems with this drug is its very low solubility in biological fluids, which results in poor bioavailability after oral administration. An attempt was made to enhance the dissolution rate of piroxicam by converting it into porous solid dispersion by flash evaporation method using polyvinylpyrrolidone (PVP) 40,000 as a water-soluble carrier. The resulting solid dispersions were characterized by DSC, FTIR, and X-ray diffraction. In vitro dissolution study revealed significant improvement of dissolution profile of piroxicam. The release of drug from porous solid dispersions containing PVP was superior to those of marketed product, conventional nonporous solid dispersion prepared by solvent evaporation method and drug alone. The steep increase in dissolution rate of porous form is attributable to combined effect of solid dispersion and capillarity.     

Physicochemical Characterization and Dissolution Study of Solid Dispersions of Lovastatin with Polyethylene Glycol 4000 and Polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to‐carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile of Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Physicochemical characterization and dissolution study of solid dispersions of Lovastatin with polyethylene glycol 4000 and polyvinylpyrrolidone K30

Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.     

Dissolution behaviour of nalidixic acid solid dispersions using water soluble dispersion carriers

The oral bioavailability of nalidixic acid (NA) is low due to its poor solubility and slow dissolution. Solid dispersions of NA containing varying concentrations of polyvinylpyrrolidone (PVP), beta-cyclodextrin (BCD) and sodium starch glycolate (SSG) were prepared by solvent evaporation technique in an attempt to improve dissolution rate of NA. Physical characterization of NA, physical mixtures (PM) and solid dispersions were investigated by a variety of analytical methods including scanning electron microscopy (SEM), infrared (IR) spectroscopy and powder X-ray diffraction (XRD). SEM was useful in the verification of possible nalidixic acid inclusion in the dispersion system by studying its surface and shape characteristics of different samples. IR analysis demonstrated no strong interaction between the drug and the carrier exists in the solid dispersions. The degree of crystallinity of nalidixic acid decreased and also differed with the dispersion systems of different carriers. Disolution studies indicated that the dissolution rate and percent dissolution efficiency (DE) were significantly increased in the solid dispersions compared with drug alone. The relative potency of the carriers to enhance the dissolution rate of nalidixic acid was in the order: BCD > PVP > SSG. The dissolution rate of the drug in the solid dispersions was faster when the ration of the drug to carrier was smaller. F-test suggests that first order model may be used for explaining the kinetics of drug release from all the solid dispersion systems.     

尼莫地平固体分散体的研究

目的 制备尼莫地平固体分散体,增加其溶出速度.方法 应用聚乙烯吡咯烷酮（PVP）为载体,采用喷雾干燥制备尼莫地平固体分散体,通过差示扫描量热分析（DSC）和X-射线粉末衍射分析鉴别药物在载体中的存在状态,并进行了体外溶出度研究.结果 尼莫地平在载体中以分子状态存在,尼莫地平固体分散体的溶出度与尼莫地平原料药和原料药载体物理混合物相比有显著提高,载体比例越大,药物溶出越快,药物载体比例为1：3时t50仅0.972 6 min,结论聚乙烯吡咯烷酮（PVP）作为尼莫地平固体分散体的载体载药量大;喷雾干燥工艺重现性好,分散体颗粒无需粉碎可满足各类固体制剂的制备要求,是一种较理想的尼莫地平固体分散体的制备方法.     

Formation and characterization of solid dispersions of piroxicam and polyvinylpyrrolidone using spray drying and precipitation with compressed antisolvent

Solid dispersions of a poorly water-soluble drug piroxicam in polyvinylpyrrolidone (PVP) were prepared by precipitation with compressed antisolvent (PCA) and spray drying techniques. Physicochemical properties of the products and drug-polymer interactions were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry, etc. Piroxicam was found amorphously dispersed in both solid dispersion systems with the drug to polymer weight ratio of 1:4. Spectra data indicated the formation of hydrogen bonding between the drug and the polymer. Both techniques evaluated in this work resulted in improved dissolution of piroxicam. By comparison, PCA-processed solid dispersions showed distinctly superior performance in that piroxicam dissolved completely within the first 5 min and the dissolution rate was at least 20 times faster than raw drug did within the first 15 min. PCA processing could provide an effective pharmaceutical formulation technology to improve the bioavailability of poorly water-soluble drug.     

难溶性药物水飞蓟宾固体分散体的制备及评价(英文)

采用溶剂法制备水飞蓟宾的PVP K30固体分散体以提高其溶解度和溶出速率;通过平衡溶解度、溶出速率、DSC和FTIR等方法验证和定性分析制备的固体分散体。水飞蓟宾的固体分散体与原料药及物理混合物相比,改善了药物的溶解度和溶出速率。DSC曲线显示水飞蓟宾的吸热峰消失,表明水飞蓟宾以无定形物分散于载体材料中;FTIR的研究结果表明水飞蓟宾的羟基和PVP K30的羰基发生了反应。固体分散技术可应用于难溶性药物以改善其体外溶出及进一步的体内吸收。     

Silymarin-solid dispersions: characterization and influence of preparation methods on dissolution

The influence of preparation methodology of silymarin solid dispersions using a hydrophilic polymer on the dissolution performance of silymarin was investigated. Silymarin solid dispersions were prepared using HPMC E 15LV by kneading, spray drying and co-precipitation methods and characterized by FTIR, DSC, XRPD and SEM. Dissolution profiles were compared by statistical and model independent methods. The FTIR and DSC studies revealed weak hydrogen bond formation between the drug and polymer, while XRPD and SEM confirmed the amorphous nature of the drug in co-precipitated solid dispersion. Enhanced dissolution compared to pure drug was found in the following order: co-precipitation > spray drying > kneading methodology (p < 0.05). All preparation methods enhanced silymarin dissolution from solid dispersions of different characteristics. The co-precipitation method proved to be best and provided a stable amorphous solid dispersion with 2.5 improved dissolution compared to the pure drug.     

格列喹酮固体分散体的制备及溶出度测定

目的:制备格列喹酮固体分散体并考察其体外溶出性。方法:以聚乙烯吡咯烷酮K30(PVP)、聚乙二醇6000(PEG)为载体,溶剂熔融法和溶剂法制备格列喹酮固体分散体,并与原料药比较体外溶出度。结果:载体比例越大,药物溶出愈快。载体为PVP所制固体分散体的体外溶出行为总体优于载体为PEG者。格列喹酮-PVP固体分散体(1∶7)10min内体外溶出度达到70%以上,优于格列喹酮原料药。结论:成功制备了格列喹酮固体分散体。     

Solid dispersion of carbamazepine in PVP K30 by conventional solvent evaporation and supercritical methods

This study compares the physicochemical properties of carbamazepine (CBZ) solid dispersions prepared by either a conventional solvent evaporation versus a supercritical fluid process. Solid dispersions of carbamazepine in polyvinylpyrrolidone (PVP) K30 with either Gelucire 44/14 or Vitamin E TPGS, NF (d-alpha-tocopheryl polyethylene glycol 1000 succinate) were prepared and characterized by intrinsic dissolution, differential scanning calorimetry, powder X-ray diffraction and Fourier transform infrared spectroscopy. CBZ/PVP K30 and CBZ/PVP K30/TPGS solid dispersions showed increased dissolution rate. The best intrinsic dissolution rate (IDR) was obtained for supercritically processed CBZ/PVP K30 that was four-fold higher than pure CBZ. Thermograms of various solid dispersions did not show the melting peak of CBZ, indicating that CBZ was in amorphous form inside the carrier system. This was further confirmed by X-ray diffraction studies. Infrared spectroscopic studies showed interaction between CBZ and PVP K30 in solid dispersions. The amorphous state of CBZ coupled with presence of interaction between drug and PVP K30 suggests fewer, if any, stability problems. Because the supercritical-based process produced solid dispersions with IDR better than conventional solid dispersions augmented with amphiphilic carriers, stability issues associated with lipid carriers do not apply, which, in turn, implies easier scale up under current Good Manufacturing Practice for this technique.     

穿心莲内酯聚丙烯酸树脂Ⅱ固体分散体的制备及表征

目的：研究无定形聚合物聚丙烯酸树脂Ⅱ（Eudragit Ⅱ）制备的穿心莲内酯固体分散体的优良性质,为固体分散体的载体选择提供参考依据。方法：以无定形聚合物Eudragit Ⅱ为载体材料,按穿心莲内酯-载体质量比为1：3,采用喷雾干燥法制备穿心莲内酯固体分散体,并用傅里叶变换红外光谱（FTIR）、热重分析（TG）、X-射线衍射（XRD）、差示扫描量热（DSC）、扫描电镜（SEM）、比表面积、粒径和溶出度测定穿心莲内酯固体分散体的理化性质及溶出行为。结果：FTIR光谱和TG分析说明在穿心莲内酯固体分散体和物理混合物中穿心莲内酯与Eudragit Ⅱ之间都存在分子间相互作用,其中穿心莲固体分散体具有更好的热稳定性;DSC和XRD分析说明无定形载体Eudragit Ⅱ制备的固体分散体中穿心莲内酯主要以无定形形式存在;SEM显示,固体分散体中穿心莲内酯由块状晶体形态变为了不规则的圆形形态;同时与物理混合物相比,穿心莲内酯固体分散体具有更大的比表面积、更大的孔体积和更小的粒径等粉体学性质;溶出实验表明穿心莲内酯固体分散体具有增大溶出的优势,效果明显。结论：以无定形载体Eudragit Ⅱ制备的穿心莲内酯固体分散体具有优良的理化性质,同时比表面积大,孔体积大的特征更有利于水分子的进入,从而有效地增大穿心莲内酯的溶出速率。     

他克莫司固体分散体的制备及体外溶出度测定

目的:制备他克莫司固体分散体,提高他克莫司的体外溶出度。方法:以体外溶出度为指标,从泊洛沙姆188(Poloxamer188)、聚维酮K30(PVP K30)、羟丙甲纤维素(HPMCE3)、聚乙二醇6000(PEG6000)中筛选最优载体及其比例。并采用差示热量扫描(DSC)、红外光谱(FTIR)、电子扫描电镜(SEM)等进行物相表征。结果:4种不同载体制成的固体分散体均能增加他克莫司体外溶出度,通过比较优选出HPMCE3为最佳载体。物相鉴定表明,他克莫司大部分以无定型状态分散于HPMCE3中。结论:制备他克莫司-HPMCE3固体分散体可以明显提高其体外溶出度,且制备方法简单可行。     

Preparation and in vivo ocular absorption studies of disulfiram solid dispersion

Disulfiram, a dimer of diethyldithiocarbamate (DDC) which is a strong radical scavenger, is known to prevent cataract development. However, disulfiram is hardly absorbed from the cornea and its bioavailability is extremely low. In this study, we attempted to prepare disulfiram solid dispersion for the improvement of ocular bioavailability. Solid dispersions of disulfiram were prepared by either an evaporation method or a spray-drying method, using polyvinylpyrrolidone (PVP) as a carrier. Preparations were analyzed by scanning electron microscopy, powder X-ray diffractometry and differential scanning calorimetry, and confirmed to be a solid dispersion. The particle size of the solid dispersion prepared by the spray-drying method was smaller than the preparation by the evaporation method (spray-drying: 3.3+/-0.04 microm, evaporation: 34.3+/-18.0 microm). An in vivo ocular absorption experiment was conducted by instilling solid dispersions to rabbit eye and measuring the DDC in the aqueous humor. After instillation of disulfiram and PVP physical mixture, DDC was not detected in the aqueous humor. On the other hand, DDC appeared in the aqueous humor after the instillation of a solid dispersion. Maximal concentration and the area under the aqueous humor concentration-time curve were greater in the solid dispersion prepared by the spray-drying method than the preparation by the evaporation method. Disulfiram solid dispersion, especially prepared by the spray-drying method, improved ocular bioavailability.     

磷脂固体分散体对槲皮素溶出促进作用的研究

目的研究磷脂固体分散体对槲皮素溶出的促进作用。方法用溶剂法制备了不同比例的槲皮素的磷脂固体分散体 ,与其相应的物理混合物及槲皮素的PVP或PEG4 0 0 0 (1∶1)固体分散体并进行了溶出的对比研究。结果所制得固体分散体均可改善槲皮素的溶出 ,而质量比为 1∶1的槲皮素 磷脂固体分散体的溶出促进作用最为显著。DSC和X射线粉末衍射的研究表明 ,在质量比为1∶1的槲皮素 磷脂固体分散体中 ,槲皮素以无定形的状态分散于载体磷脂中 ,其熔点吸热峰消失。结论槲皮素溶出度的增大与其无定形的存在状态、磷脂对其的润湿作用以及磷脂在水中可形成脂质体有关     

Investigation of drug–polymer interaction in solid dispersions by vapour sorption methods

The objective of this study was to investigate the effect of different polymeric carriers in solid dispersions with an active pharmaceutical ingredient (API) on their water vapour sorption equilibria and the influence of the API–polymer interactions on the dissolution rate of the API. X-ray diffraction, scanning electron microscopy (SEM), moisture sorption analysis, infrared (IR) spectroscopy and dissolution tests were performed on various API–polymer systems (Valsartan as API with Soluplus, PVP and Eudragit polymers) after production of amorphous solid dispersions by spray drying. The interactions between the API and polymer molecules caused the water sorption isotherms of solid dispersions to deviate from those of ideal mixtures. The moisture sorption isotherms were lower in comparison with the isotherms of physical mixtures in all combinations with Soluplus and PVP. In contrast, the moisture sorption isotherms of solid dispersions containing Eudragit were significantly higher than the corresponding physical mixtures. The nature of the API–polymer interaction was explained by shifts in the characteristic bands of the IR spectra of the solid dispersions compared to the pure components. A correlation between the dissolution rate and the water sorption properties of the API–polymer systems has been established.