External fixation versus volar locking plate for displaced intra-articular distal radius fractures: a prospective randomized comparative study of the functional outcomes

Background

The objective of the study was to compare the efficacy of external fixation and volar plating on the functional parameter of displaced intra-articular (Cooney’s type IV) distal end radius fractures using the Green and O’Brien scoring system.

Materials and methods

This prospective randomized study comprised 68 patients treated with external fixation and 42 patients treated with volar locking plates. The patients were followed up at 6 months and 1 year after surgery. The assessment of pain, range of motion, grip strength and activity were assessed at each follow-up visit and scored according to the Green and O’Brien scoring system.

Results

At 1 year after surgery, we observed that external fixation showed significantly better results than volar locking plates using the Green and O’Brien scores for range of motion (22.0 ± 4.77 vs 19.89 ± 5.05), grip strength (19.91 ± 5.4 vs 16.89 ± 4.4) and final outcome (87.36 ± 11.62 vs 81.55 ± 11.32). No difference was found in pain and activity between these two groups of patients. Patients aged <50 years treated with external fixation showed excellent results (final score (91.57 ± 9.01) at 1 year follow-up.

Conclusion

External fixation showed superiority over volar locked plating after 1 year of surgery.

Level of evidence

IV.     

Are Volar Locking Plates Superior to Percutaneous K-wires for Distal Radius Fractures? A Meta-analysis

Background

Distal radius fractures are common, costly, and increasing in incidence. Percutaneous K-wire fixation and volar locking plates are two of the most commonly used surgical treatments for unstable dorsally displaced distal radius fractures. However, there is uncertainty regarding which of these treatments is superior.

Questions/purposes

We performed a meta-analysis of randomized controlled trials to determine whether patients treated with volar locking plates (1) achieved better function (2) attained better wrist motion, (3) had better radiographic outcomes, and (4) had fewer complications develop than did patients treated with K-wires for dorsally displaced distal radius fractures.

Methods

We performed a comprehensive search of MEDLINE (inception to 2014, October Week 2), EMBASE (inception to 2014, Week 42), and the Cochrane Central Register of Controlled Trials to identify relevant randomized controlled trials; we supplemented these searches with manual searches. We included studies of extraarticular and intraarticular distal radius fractures. Adjunctive external fixation was acceptable as long as the intent was to use only K-wires where possible and external fixation was used in less than 25% of the procedures. We considered a difference in the DASH scores of 10 as the minimal clinically important difference. We performed quality assessment with the Cochrane Risk of Bias tool and evaluated the strength of recommendations using the Grades of Recommendation, Assessment, Development and Evaluation (GRADE) approach. Seven randomized trials with a total of 875 participants were included in the meta-analysis.

Results

Patients treated with volar locking plates had slightly better function than did patients treated with K-wires as measured by their DASH scores at 3 months (mean difference [MD], 7.5; 95% CI, 4.4–10.6; p < 0.001) and 12 months (MD, 3.8; 95% CI, 1.2–6.3; p = 0.004). Neither of these differences exceeded the a priori-determined threshold for clinical importance (10 points). There was a small early advantage in flexion and supination in the volar locking plate group (3.7° [95% CI, 0.3°–7.1°; p = 0.04] and 4.1° [95% CI, 0.6°–7.6°; p = 0.02] greater, respectively) at 3 months, but not at later followups (6 or 12 months). There were no differences in radiographic outcomes (volar tilt, radial inclination, and radial height) between the two interventions. Superficial wound infection was more common in patients treated with K-wires (8.2% versus 3.2%; RR = 2.6; p = 0.001), but otherwise no difference in complication rates was found.

Conclusions

Despite the small number of studies and the limitations inherent in a meta-analysis, we found that volar locking plates show better DASH scores at 3- and 12-month followups compared with K-wires for displaced distal radius fractures in adults; however, these differences were small and unlikely to be clinically important. Further research is required to better delineate if there are specific radiographic, injury, or patient characteristics that may benefit from volar locking plates in the short term and whether there are any differences in long-term outcomes and complications.

Level of Evidence

Level I, therapeutic study.

Electronic supplementary material

The online version of this article (doi:10.1007/s11999-015-4347-1) contains supplementary material, which is available to authorized users.     

Routine use of locking shaft screws is not necessary in volar plate fixation of distal radius fractures

Hypothesis

Volar locking plate fixation is a common treatment method for distal radius fractures. Recently, implants have been designed with an option to use locking screws in the shaft portion of the plate. While there is a high incidence of low bone mineral density in patients who sustain fragility fractures of the distal radius, the need for locking shaft screws is not well defined. Our hypothesis is that the routine use of locking screws in the shaft portion of volar plates is not required to maintain reduction or to prevent hardware failure.

Methods

A retrospective review was performed in all patients over age 50 years who underwent volar plate fixation using an implant with non-locking shaft screws for a distal radius fracture during a 2-year period. Patients were permitted to perform early range of motion exercises. Radiographs were examined and measurements were obtained to assess maintenance of reduction and incidence of hardware failure. Patients were followed at least until fracture healing. Patients were excluded from analysis if locking shaft screws were utilized or if follow-up was inadequate.

Results

Forty-one patients met the inclusion criteria. The average age was 62 years (range 50–79). There were 12 men and 29 women. The implant used incorporated 3.5-mm shaft screws in 26 patients and 2.4-mm shaft screws in 15 patients. All patients healed within acceptable radiographic parameters (mean volar tilt = 4.9°, mean radial inclination = 21.7°, mean radial height = 11.6 mm). There were not any instances of hardware failure.

Discussion

Distal radius fractures frequently occur in patients with low bone mineral density. Non-locking, bicortically placed shaft screws provide adequate stability to allow for early range of motion without loss of reduction or hardware failure. The routine use of locking screws in the shaft portion of volar plates does not appear justified.     

Scapholunate instability after distal radius volar plating

Background

Prior to volar locked plating and early motion protocols, ligamentous injuries incidentally associated with distal radius fractures may have been indirectly treated with immobilization. Our goal was to determine the prevalence of scapholunate instability in our population, while identifying those who may have had progression of instability.

Methods

We retrospectively reviewed 221 distal radius fractures treated with a volar locking plate during a 6-year period. Average patient age was 59 years. Standard posteroanterior and lateral radiographs from the first and last postoperative visits were analyzed for scapholunate instability, using the criteria of scapholunate gap ≥3 mm and scapholunate angle ≥60°.

Results

Six patients (3 %) met neither or only one criterion for instability at the first postoperative visit and did not have ligament repair and then went on to meet both criteria at the last postoperative visit after an early motion protocol. Seven patients (3 %) met both criteria at the first and last postoperative visits and did not have ligament repair. Five patients (2 %) underwent primary scapholunate ligament repair at the time of distal radius fixation.

Conclusions

In our representative population, scapholunate instability was uncommon, either from initial injury or possible progression of occult ligament injury, despite early motion without operative treatment of the ligament. Thus, we did not find strong evidence for routinely delaying motion or pursuing further workup. When early radiographs clearly demonstrate acute scapholunate instability, more aggressive treatment may be appropriate for selected patients.     

Complication rates and reduction potential of palmar versus dorsal locking plate osteosynthesis for the treatment of distal radius fractures

Background

The aim of this study was to evaluate the complication rates of volar versus dorsal locking plates and postoperative reduction potential after distal radius fractures.

Materials and methods

For this study 285 distal radius fractures (280 patients/59.4 % female) treated with locked plating were retrospectively evaluated. The mean age of the patients was 54.6 years (SD 17.4) and the mean follow-up was 33.2 months (SD 17.2). The palmar approach was used in 225 cases and the dorsal approach in 60 cases (95 % type C fractures).

Results

Adequate reduction was achieved with both approaches, regardless of fracture severity. In the dorsal group, the complications and implant removal rates were significantly higher and the operative time was also longer.

Conclusions

Based on these facts, we advocate the palmar locking plate for the vast majority of fractures. In cases of complex multifragmentary articular fractures where no compromise in reduction is acceptable, and with the biomechanical equality of palmar and dorsal plating remaining unproven, dorsal plating may still be considered.

Level of evidence

Therapeutic level IV.     

Postsurgical complications following distal radius volar plating in a diabetic population at short-term follow-up

Background

Diabetes mellitus increases the risk of complications following operative treatment of lower extremity fractures. There is little published data establishing the impact of diabetes following surgical treatment of upper extremity fractures. This investigation aimed to compare the incidence of short-term postsurgical complications following volar locked plating of distal radius fractures in patients with and without diabetes.

Methods

A retrospective matched cohort investigation of 33 diabetics matched 1:2 to 66 non-diabetics was performed, accounting for age, gender, fracture type, and smoking status. Electronic medical records and radiographs were reviewed for all major and minor postsurgical complications. Demographic characteristics, postoperative radiographic parameters, and final range of motion were also compared. Mean follow-up was 5.3 ± 8.2 and 5.5 ± 7.8 months for diabetics and non-diabetics, respectively.

Results

The diabetic cohort had a significantly higher overall complication rate with 24 postsurgical complications affecting 12 patients (36 %) compared to 16 complications affecting 12 patients (18 %) in the non-diabetic cohort. There was no difference in the incidence of major complications requiring operative intervention. Minor complications were significantly more common in the diabetic group and were largely accounted for by peripheral neuritis with an incidence of 30 %. Final radiographic outcomes and range of motion were similar.

Conclusions

Diabetics experienced a greater incidence of minor postsurgical complications following volar locked plating of distal radius fractures when compared to a matched, control population. The difference in outcomes is largely accounted for by the increased incidence of peripheral neuritis among diabetics. Diabetic patients should be counseled pre-operatively regarding their elevated risk profile.     

The use of a single volar locking plate for AO C3-type distal radius fractures

Background

A single volar locking plate (VLP) is now frequently used for open reduction and internal fixation (ORIF) of many types of distal radius fractures. Comminuted intra-articular distal radius fractures (AO C3-type) are typically the most challenging to surgically treat. No studies directly address the adequacy of a VLP alone for maintaining reduction of AO C-type fractures. We hypothesized that a single VLP provides an effective method for maintaining reduction for these fractures.

Methods

We retrospectively evaluated radiographs of a series of AO C-type fractures. Seventy-seven patients with 77 AO C3-type fractures were identified from billing records and were eligible for the study. All patients were treated by fellowship-trained hand surgeons. Radiographs at the time of union were compared to those from immediately postoperatively.

Results

Sixty-nine of 77 (89.6 %) fractures treated with VLP fixation alone for AO C3-type distal radius fractures united without loss of reduction. Eight of 77 (10.4 %) patients treated with VLP for AO C3 fractures lost reduction. The most common fracture fragment to lose reduction was the lunate fossa (5 of 8); loss of reduction of the scaphoid fossa die-punch fragment (2 of 8) and the radial styloid (1 of 8) were also seen.

Conclusions

The majority (89.6 %) of AO C3-type fractures treated with a single volar locking plate come to union without loss of reduction.Level of evidence: Level IV.     

In vitro kinematics of the proximal interphalangeal joint in the finger after progressive disruption of the main supporting structures

Background

Fractures and dislocations of the proximal interphalangeal (PIP) joint of the fingers are among the most common causes of injury in the hand. Objective assessment of the kinematic alterations occurring when the supporting structures are disrupted is critical to obtain a more accurate indication of joint stability.

Methods

An in vitro cadaver model of the hand was used to evaluate the kinematics of the PIP joint in the finger during active unrestrained flexion and extension. The kinematics of the PIP joint following progressive disruption of the main supporting structures was measured using an optical tracking system and compared with those in the intact joint.

Results

Flexion of the intact PIP joint was associated with joint compression, volar displacement, and rotational movements. Release of the main soft-tissue stabilizers and 30 % of volar lip disruption resulted in substantial alteration of several kinematic variables. The normalized maximum dorsal/volar translation was 0.1 ± 1.3 % in the intact group and 14.4 ± 11.3 % in the injured joint.

Conclusions

In the intact PIP joint, rotations and translation are strongly coupled to the amount of joint flexion. Gross instability of the PIP joint occurs when disruption of the collateral ligaments and volar plate is accompanied by resection of at least 30 % of volar lip of the middle phalanx. Collateral ligament injuries, volar plate injuries alone, and fractures at the volar base of the middle phalanx that involve less than 30 % of the articular surface are unlikely to result in gross instability and may be managed effectively with non-operative treatments.     

Is Intralesional Treatment of Giant Cell Tumor of the Distal Radius Comparable to Resection With Respect to Local Control and Functional Outcome?

Background

A giant cell tumor is a benign locally aggressive tumor commonly seen in the distal radius with reported recurrence rates higher than tumors at other sites. The dilemma for the treating surgeon is deciding whether intralesional treatment is adequate compared with resection of the primary tumor for oncologic and functional outcomes. More information would be helpful to guide shared decision-making.

Questions/purposes

We asked: (1) How will validated functional scores, ROM, and strength differ between resection versus intralesional excision for a giant cell tumor of the distal radius? (2) How will recurrence rate and reoperation differ between these types of treatments? (3) What are the complications resulting in reoperation after intralesional excision and resection procedures? (4) Is there a difference in functional outcome in treating a primary versus recurrent giant cell tumor with a resection arthrodesis?

Methods

Between 1985 and 2008, 39 patients (39 wrists) were treated for primary giant cell tumor of the distal radius at two academic centers. Twenty patients underwent primary intralesional excision, typically in cases where bony architecture and cortical thickness were preserved, 15 underwent resection with radiocarpal arthrodesis, and four had resection with osteoarticular allograft. Resection regardless of reconstruction type was favored in cases with marked cortical expansion. A specific evaluation for purposes of the study with radiographs, ROM, grip strength, and pain and functional scores was performed at a minimum of 1 year for 21 patients (54%) and an additional 11 patients (28%) were available only by phone. We also assessed reoperations for recurrence and other complications via chart review.

Results

With the numbers available, there were no differences in pain or functional scores or grip strength between groups; however, there was greater supination in the intralesional excision group (p = 0.037). Tumors recurred in six of 17 wrists after intralesional excision and none of the 15 after en bloc resection (p = 0.030). There was no relationship between tumor grade and recurrence. There were 12 reoperations in eight of 17 patients in the intralesional excision group but only one of 11 patients (p = 0.049) who underwent resection arthrodesis with distal radius allograft had a reoperation. There were no differences in functional scores whether resection arthrodesis was performed as the primary procedure or to treat recurrence after intralesional excision.

Conclusions

Resection for giant cell tumor of the distal radius with distal radius allograft arthrodesis showed a lower recurrence rate, lower reoperation rate, and no apparent differences in functional outcome compared with joint salvage with intralesional excision. Because an arthrodesis for recurrence after intralesional procedures seems to function well, we believe that intralesional excision is reasonable to consider for initial treatment, but the patient should be informed about the relative benefits and risks of both options during the shared decision-making process. Because arthrodesis after recurrence functions similar to the initial resection and arthrodesis, an initial treatment with curettage remains a viable, and likely the standard, mode of treatment for most giant cell tumors of the distal radius unless there is extensive bone loss.

Level of Evidence

Level III, therapeutic study.     

Isolated volar surgical approach for the treatment of perilunate and lunate dislocations

Background:

Volar and/or dorsal surgical approaches are used for surgical treatment of perilunate and lunate dislocations. There are no accepted approaches for treatment in the literature. We evaluated the functional results of isolated volar surgical approach for the treatment of perilunate and lunate dislocation injuries.

Materials and Methods:

9 patients (6 male and 3 female patients average age 34.5 ± 3.6 years) diagnosed with perilunate or lunate dislocations between January 2000 and January 2009 were involved in the study. The reduction was performed through isolated volar surgical approach and K-wire fixation, fracture stabilization with volar ligament repair was performed. Range of wrist joint motion, fracture healing, carpal stability, grip strength, return to work were evaluated and also direct radiographs were taken routinely at each control. The scapholunate interval and the scapholunate angle were evaluated radiographically. Evaluations of the clinical results were done using the DASH, VAS and Modified Mayo Wrist Scores.

Results:

The physical rehabilitation was started at 6^th week, after the K-wires were removed. The average followup was 18.2 months (range 12-28 months). At the final followup, the average flexion extension arc was 105.0 ± 9.6° (74.6% of the other side), the average rotation arc was 138.8 ± 7.8° (81.5% of the other side) and the average radioulnar arc was 56.1 ± 9.9° (86.4% of the other side). The grip strength was 0.55 bar; 83.2% that the uninjured arm. According to the Mayo Modified Wrist score, the functional result was excellent in five patients and good in four and the average DASH score was 22.8. The scapholunate interval was 2.1 mm and scapholunate angle was 51°.

Conclusion:

The clinical and radiological results of the isolated volar surgical approach were satisfactory. The dorsal approach was not needed for reduction of dislocations during operations. Our results showed that an isolated volar approach was adequate.     

Intramedullary repair device against volar plating in the reconstruction of extra-articular and simple articular distal radius fractures; a randomized pilot study

Purpose

This prospective randomized pilot study reports our institutional experience and early results using Sonoma Wrx (Sonoma Orthopedic Products, Santa Rosa, CA) in the treatment of extra-articular and simple intra-articular distal radius fractures.

Material and methods

A total of 64 patients, were enrolled in the study. They were considered eligible if they had; unstable extra-articular distal radius fractures and simple intra-articular distal radius fractures suitable for closed reduction (AO types; A2.2, A2.3, A3.1 C2.1, C2.2). Patients in group I received intramedullary fixation using the Sonoma Wrx® device and patients in group II received standard volar locking plate fixation. Radiographic criteria of acceptable healing were used for evaluation.

Results

Two groups were similar in terms of baseline characteristics. Mean time of operation was significantly shorter in Group 1 vs. in group 2 (36.81 ± 7.11 vs. 48.97 ± 5.9 minutes, p = 0.001). Time to healing of the fracture was not different between two groups (5.45 ± 1.09 vs. 5.70 ± 1.04 weeks for Group 1 vs. 2, respectively p = 0.36). Overall complications occurred in 9 patients in group 1 and in 15 patients in group 2 (p = 0.17). Follow-up was completed in all patients with a median time of 12 months and 13 months in group 1 and 2, respectively. On radiographic evaluation radial inclination, radial height and volar tilt were not significantly different between group 1 and 2, respectively. There were no significant differences between two groups in regard to wrist rotational degrees measured in last follow-up visit.

Conclusion

Sonoma Wrx Device is reliable and effective in terms of achieving satisfactory outcomes in treatment of distal radius fractures. It may be reasonable to use this device to prevent complications that are related to extensive soft tissue dissection.     

The role of fracture reduction and plate position in the aetiology of flexor pollicis longus tendon rupture after volar plate fixation of distal radius fractures

Background

Flexor pollicis longus (FPL) rupture has been described as complication following volar plating for distal radius fractures. It has been hypothesised that this is due to plate prominence. The aim of the study was to investigate the relationship between sub-optimal plate position and fracture reduction on plate prominence.

Methods

Plate prominence was measured in two experimental models. In the first, the effect of plate position was investigated using 18 fresh frozen cadavers with prominence being measured using a micrometer. In the second study, the effect of fracture reduction on plate prominence was investigated using similar methodology with simulated mal-reductions on dry bone models.

Results

The results of the first study showed a significant increase in lift-off for three plates (DVR, Synthes Universal and Acu-Loc), if the plates were moved distally or proximally from the anatomical position. Similar increases in prominence were also seen with rotational mal-positions.The results of the second study showed a statistically significant effect on plate prominence for even a 5° mal-reduction (p = 0.001) with worsening lift-off with increasing mal-reduction. These changes are significantly different from baseline and also significantly different to the lift-off recorded with mal-reductions 5° better and worse.Mal-reductions also necessitate more proximal placement of the plate to avoid screw penetration of the articular surface, and each 5° increment is significantly different from baseline.

Conclusions

The results show a statistically and clinically significant effect of both plate position and fracture reduction on plate prominence and support the theory that both contribute to the aetiology of post-operative FPL rupture.     

Mini-open versus extended open release for severe carpal tunnel syndrome

Background

This study aims to compare surgical outcomes of severe carpal tunnel syndrome (CTS) treated with mini-incision versus extensile release.

Methods

The method employed in this study was a retrospective review of patients with severe CTS, defined by electrophysiologic studies showing non-recordable distal sensory latency of the median nerve. Patients underwent either a mini-incision (2 cm) release of the transverse carpal ligament (group 1) or extensile release proximal to the wrist flexion crease (group 2). Exclusion criteria included prior carpal tunnel release, use of muscle flap, multiple concurrent procedures, or a prior diagnosis of peripheral neuropathy. Group 1 included 70 wrists (40 females, 30 males). Group 2 included 64 wrists (35 females, 29 males). Reported outcomes included pre- and post-operative grip strength as well as Boston Carpal Tunnel Questionnaires (BCTQ).

Results

Patients in group 1 had a 22.6 % increase in grip strength postoperatively (4.5 months ± 5.0), while patients in group 2 had a 59.3 % increase (10.0 months ± 6.9). BCTQ surveys from group 1 (n = 46) demonstrated a symptom severity score of 12.93 and functional status score of 9.39 at an average follow-up of 41.9 ± 10.6 months. Group 2 (n = 42) surveys demonstrated averages of 12.88 and 9.10 at 43.1 ± 11.6 months. One patient in the mini-incision cohort required revision surgery after 2 years, while no patient in the extended release cohort underwent revision.

Conclusion

No significant differences between the two procedures with regard to patient-rated symptom severity or functional status outcomes were found. Both techniques were demonstrated to be effective treatment options for severe CTS.     

Radiographic interpretation of distal radius fractures: visual estimations versus digital measuring techniques

Purpose

Distal radius fractures are a common injury. In the emergency room, trainees regularly assess these fractures using visual estimation. Our hypothesis is that assessment of radiographic parameters has sufficient accuracy for rendering treatment consistent with formal measurements.

Methods

This study compared visual measurements made by 25 orthopaedic residents and attending physicians to formal measurements made by a single fellowship trained musculoskeletal radiologist in a series of patients with distal radius fractures. A search was performed utilizing the ICD-9 code for distal radius fracture in all patients presenting to a single institution emergency department. Participants used visual estimation to rate 25 radiographs. Parameters estimated included radial inclination, radial height, volar tilt, and the presence of intra-articular displacement. Analysis using Lin concordance coefficients, Bland Altman plots, and the Kappa statistic evaluated the agreement between visual estimation and formal measurements. The proportion of raters whose estimates would have resulted in a course of treatment that conflicted with the formal reading quantified the potential impact of visual estimation on treatment.

Results

Concordance coefficients were poor for radial inclination (ρc = 0.13), radial height (ρc = 0.24), and volar tilt (ρc = 0.46). The Kappa statistic for intra-articular displacement was 0.4. Analysis performed according to level of training did not result in substantial improvements in these statistics. Treatment based on visual estimates conflicted with formal readings 34 % of the time for radial inclination, 38 % of the time for radial height, 27 % of the time for volar tilt, and 31 % of the time for intra-articular displacement.

Discussion

Visual estimation is not an adequate form of measurement for evaluation of patients with distal radius fractures. Physicians should be mindful of these results when developing treatment plans based solely upon visual estimation.     

Is there a safe zone to avoid superficial radial nerve injury with Kirschner wire fixation in the treatment of distal radius? A cadaveric study

Aim of the study

To determine the relation of the superficial radial nerve to bony land-marks and to identify a safe zone for K-wire pinning in the distal radius.

Method

The superficial radial nerve was dissected in sixteen upper extremities of preserved cadavers.

Results

We found that the superficial radial nerve emerged from under brachioradialis at a mean distance of 8.45 (±1.22) cm proximal to the radial styloid. The mean distance from the first major branching point of the superficial radial nerve to the radial styloid were 4.8 ± 0.4 cm.All branches of the superficial radial nerve were found to lie in the radial half of an isosceles triangle formed by the radial styloid, Lister''s tubercle and the exit point of the superficial radial nerve. There is an elliptical area just proximal to the Lister''s tubercle. This area is not crossed by any tendons or nerve. It is bounded by the extensor carpiradialis brevis, extensor pollicis longus.

Conclusion

Pinning through the radial styloid is unsafe as the branches of the superficial radial nerve passé close to it. The ulnar half of the isosceles triangle is safe regarding the nerve. The elliptical zone just proximal to the Lister''s tubercle is safe regarding the tendons and nerve.     

Results of Abductor Pollicis Longus Suspension Ligamentoplasty for Treatment of Advanced First Carpometacarpal Arthritis

Background

Suspension ligamentoplasty using abductor pollicis longus (APL) tendon without bone tunneling, was introduced as one of the techniques for treatment of advanced first carpometacarpal (CMC) arthritis. The purpose of this study was to evaluate the radiologic and clinical results of APL suspension ligamentoplasty.

Methods

The medical records of 19 patients who underwent APL suspension ligamentoplasty for advanced first CMC arthritis between January 2008 and May 2012 were reviewed retrospectively. The study included 13 female and 6 male patients, whose mean age was 62 years (range, 43 to 82 years). For clinical evaluation, we assessed the grip and pinch power, radial and volar abduction angle, thumb adduction (modified Kapandji index), including visual analogue scale (VAS) and Disabilities of the Arm, Shoulder and Hand (DASH) scores. Radiologic evaluation was performed using simple radiographs.

Results

The mean follow-up was 36 months (range, 19 to 73.7 months). Mean power improved from 18.3 to 27 kg for grip power, from 2.8 to 3.5 kg for tip pinch, and from 4.3 to 5.4 kg for power pinch. All patients showed decreased VAS from 7.2 to 1.7. Radial abduction improved from 71° preoperatively to 82° postoperatively. The modified Kapandji index showed improvement from 6 to 7.3, and mean DASH was improved from 41 to 17.8. The height of the space decreased from 10.8 to 7.1 mm. Only one case had a complication involving temporary sensory loss of the first dorsal web space, which resolved spontaneously.

Conclusions

The APL suspension ligamentoplasty for treatment of advanced first CMC arthritis yielded satisfactory functional results.     

Results of Corrective Osteotomy and Treatment Strategy for Ankylosing Spondylitis with Kyphotic Deformity

Background

To report the radiological and clinical results after corrective osteotomy in ankylosing spondylitis patients. Furthermore, this study intended to classify the types of deformity and to suggest appropriate surgical treatment options.

Methods

We retrospectively analyzed ankylosing spondylitis patients who underwent corrective osteotomy between 1996 and 2009. The radiographic assessments included the sagittal vertical axis (SVA), spinopelvic alignment parameters, correction angle, correction loss, type of deformity related to the location of the apex, and the craniocervical range of motion (CCROM). The clinical outcomes were assessed by the Oswestry Disability Index (ODI) scores.

Results

A total of 292 corrective osteotomies were performed in 248 patients with a mean follow-up of 40.1 months (range, 24 to 78 months). There were 183 cases of single pedicle subtraction osteotomy (PSO), 19 cases of multiple Smith-Petersen osteotomy (SPO), 17 cases of PSO + SPO, 14 cases of single SPO, six cases of posterior vertebral column resection (PVCR), five cases of PSO + partial pedicle subtraction osteotomy (PPSO), and four cases of PPSO. The mean correction angles were 31.9° ± 11.7° with PSO, 14.3° ± 8.4° with SPO, 38.3° ± 12.7° with PVCR, and 19.3° ± 7.1° with PPSO. The thoracolumbar type was the most common. The outcome analysis showed a significant improvement in the ODI score (p < 0.05). Statistical analysis revealed that the ODI score improvements correlated significantly with the postoperative SVA and CCROM (p < 0.05). There was no correlation between the clinical outcomes and spinopelvic parameters. There were 38 surgery-related complications in 25 patients (10.1%).

Conclusions

Corrective osteotomy is an effective method for treating a fixed kyphotic deformity occurring in ankylosing spondylitis, resulting in satisfactory outcomes with acceptable complications. The CCROM and postoperative SVA were important factors in determining the outcome.