Radiation sterilisation of doxorubicin bound to poly(butyl cyanoacrylate) nanoparticles

Doxorubicin-loaded poly(butyl cyanoacrylate) (PBCA) nanoparticles were prepared by anionic polymerisation under non-aseptic conditions. The feasibility of sterilisation of this formulation using either gamma-irradiation or electron beam irradiation was investigated. The irradiation doses ranged from 10 to 35 kGy. Bacillus pumilus was used as the official test microorganism. The bioburden of the untreated formulation was found to be 100 CFU/g. Microbiological monitoring revealed that at this level of the bioburden the irradiation dose of 15 kGy was sufficient for sterilisation of the nanoparticles. The formulation showed excellent stability with both types of irradiation in the investigated dose range. The irradiation did not influence the physicochemical parameters of the drug-loaded and empty nanoparticles, such as the mean particle size, polydispersity, and aggregation stability. The molecular weights of the PBCA polymer as well as the polydispersity indices (M(w)/M(n)) remained nearly unchanged. The drug substance was stable to radiolysis. Additionally, the presence of irradiation-induced radicals was evaluated by ESR spectroscopy after storage of the particles at ambient temperature. The paramagnetic species found in the formulation were mainly produced by irradiation of mannitol and dextran used as excipients.     

Brain targeting of nerve growth factor using poly(butyl cyanoacrylate) nanoparticles

The nerve growth factor (NGF) is essential for the survival of both peripheral ganglion cells and central cholinergic neurons in the basal forebrain. The accelerated loss of central cholinergic neurons during Alzheimer’s disease may be a determinant cause of dementia, and this observation may suggest a possible therapeutic benefit from treatment with NGF. In recent years, convincing data have been published involving neurotrophic factors for the modulation of dopaminergic transmission within the brain and concerning the ability of NGF to prevent the degeneration of dopaminergic neurons. In this connection, the administration of NGF may slow down the progression of Parkinson’s disease. However, NGF, as well as other peptidic neurotrophic factors, does not significantly penetrate the blood–brain barrier (BBB) from the circulation. Therefore, any clinical usefulness of NGF as a potential CNS therapy will depend on the use of a suitable carrier system that enhances its transport through the BBB. The present study investigates brain delivery of NGF adsorbed on poly(butyl cyanoacrylate) (PBCA) nanoparticles coated with polysorbate 80 and the pharmacological efficacy of this delivery system in the model of acute scopolamine-induced amnesia in rats as well as in the model of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced Parkinsonian syndrome. As shown by the passive avoidance reflex (PAR) test, the intravenous administration of the nanoparticle-bound NGF successfully reversed scopolamine-induced amnesia and improved recognition and memory. This formulation also demonstrated a significant reduction of the basic symptoms of Parkinsonism (oligokinesia, rigidity, tremor). In addition, the efficient transport of NGF across the BBB was confirmed by direct measurement of NGF concentrations in the murine brain. These results demonstrate that the PBCA nanoparticles coated with polysorbate 80 are an effective carrier system for the transport of NGF to the central nervous system across the BBB following intravenous injection. This approach may improve the NGF-based therapy of age-related neurodegenerative diseases.     

Box-Behnken optimization design and enhanced oral bioavailability of thymopentin-loaded poly (butyl cyanoacrylate) nanoparticles

This study was done to prepare thymopentin (TP5)-loaded poly (butyl cyanoacrylate) nanoparticles (TP5-PBCA-NPs) and evaluate thier efficacy for oral delivery. TP5-PBCA-NPs were prepared by emulsion polymerization, and the formulation was optimized based on Box-Behnken experimental design. The physico-chemical characteristics of TP5-PBCA-NPs were evaluated using transmission electron microscopy (TEM), malvern zetasizer, Fourier transform infra-red spectroscopy (FT-IR) and differential scanning calorimetry (DSC). The encapsulation efficiency, enzymatic degradation and release behavior of TP5-PBCA-NPs in various media were evaluated using a high-performance liquid chromatography (HPLC) method. The pharmacodynamic studies on oral administration of TP5-PBCA-NPs were performed in FACScan flow cytometry. An optimum formulation consisted of 0.7% poloxamer 188 (Pol), 0.6% dextran-70 (Dex), 0.1% sodium metabisulfite (Sm), 0.1% TP5 and 1% (v/v) n-butyl cyanoacrylate. The particle size and zeta potential of optimized TP5-PBCA-NPs was 212 nm and -22.6 mV respectively with 82.45% encapsulation efficiency. TP5 was entrapped inside the nanoparticles in molecular dispersion form. The release of TP5 from PBCA-NPs was pH dependent; the cumulative release percentage in 0.1 M HCI for 4 hours was less than 16% while it was more than 80% in pH6.8 PBS. The PBCA-NPs could efficiently protect TP5 from enzymatic degradation; the remained percentage of TP5 encapsulated in PBCA-NPs was 58.40% after incubated with trypsin in pH6.8 PBS for 4 h while it was only 32.29% for free drug. In the oral administration study in vivo, the lowered T-lymphocyte subsets values were significantly increased and the raised CD4+/CD8+ ratio was evidently reduced compared with that of TP5 solution (p < 0.05), and the improvement of bioavailability was dose-dependent. These results indicated that the PBCA nanoparticles may be a promising carrier for oral delivery of TP5.     

Molecular weights of poly(butyl cyanoacrylate) nanoparticles determined by mass spectrometry and size exclusion chromatography

Matrix-assisted laser desorption ionisation time-of-flight mass spectrometry (MALDI-TOF MS) and size exclusion chromatography (SEC) were employed to elucidate the chemical composition, mean number average molecular weight (M_n), mean weight average molecular weight (M_w), and polydispersity (PD) of poly(butyl cyanoacrylate) (PBCA) manufactured by emulsion polymerisation. Both methods gave similar results for M_n, but substantial differences were observed for M_w and PD, with MALDI producing consistently lower values which could not be improved by off-line coupling of SEC and MALDI. MALDI gave a more detailed view on the chemical composition of the cyanoacrylate and revealed the presence of two additional polymer series with different end groups besides the expected PBCA series, which showed different retention in SEC. Their formation is explained by the secession/addition of formaldehyde from/to the regular polymer via (reverse) Knoevenagel reaction. In additional experiments, the influence of different pH on PBCA-NP during polymerisation was examined by comparison of polymerisation yield and particle diameter to their chemical composition as revealed by the MALDI spectra. The most uniform nanoparticles, with the highest polymerisation yield, narrowest particle size, and mass distribution were produced at pH 1.     

Sizing of a vesicle drug formulation by quasi-elastic light scattering and comparison with electron microscopy and ultracentrifugation

Quasi-elastic light scattering has been used for the sizing of a vesicle formulation. Porcine insulin was encapsulated in a vesicle preparation containing cholesterol, dipalmitoylphosphotidylcholine, digalactosyl digycerides, and dipalmitoylphosphotidylglycerol in a 40:40:15:5 ratio. The measurement requires less than 15 min to obtain mean size and distribution information and can be operated in a quality control environment. Advantages and limitations of quasi-elastic light scattering are described and this method is compared to electron microscopy and ultracentrifugation.     

Enhanced tumour uptake of doxorubicin loaded poly(butyl cyanoacrylate) nanoparticles in mice bearing Dalton's lymphoma tumour

The objective of this study is to enhance the delivery of Doxorubicin hydrochloride to Dalton's lymphoma solid tumour through poly(butyl cyanoacrylate) (PBC) nanoparticles. Doxorubicin loaded PBC (DPBC) nanoparticles were prepared by emulsion polymerization and characterized by particle size analysis, zeta potential and scanning electron microscopy. Doxorubicin HCl (Dox) and DPBC nanoparticles were radiolabeled with 99mTc by reduction method using stannous chloride and optimized the labeling parameters to obtain high labeling efficiency. The in vitro stability of 99mTc-labeled complexes was determined by DTPA and cysteine challenge test. The labeled complexes showed very low transchelation and high in vitro and serum stability. 99mTc labeled complexes of Dox and DPBC nanoparticles were administered subcutaneously below the Dalton's lymphoma tumour and biodistribution was studied. The distribution of DPBC nanoparticles to the blood, heart and organs of RES such as liver, lung and spleen was biphasic with a rapid initial distribution, followed by a significant decrease later at 6 h post-injection. The distribution of Dox to tissues was very low initially and increased significantly at 6 h post-injection indicating its accumulation at the injection site for a longer time. The concentration of DPBC nanoparticles was also found high in tissues at 6 h post-injection indicating their accumulation at the subcutaneous site and consequent disposition to tissues with time. A significantly high tumour uptake of DPBC nanoparticles (approximately 13 fold higher at 48 h post-injection) (P <0.001) was found compared to free Dox. The tumour concentrations of both Dox and DPBC nanoparticles increased with time indicating their slow penetration from the injection site into tumour. The concentration of DPBC nanoparticles in the femur bone in the tumour region was also significantly higher (P <0.001) than free Dox and increased with time. The study signifies the advantage of delivering Dox to Dalton's lymphoma through PBC nanoparticles by facilitating enhanced tumour uptake and prolonged tumour retention, which are expected to lead to greater therapeutic effect in the form of tumour regression.     

Reversion of multidrug resistance by co-encapsulation of doxorubicin and curcumin in chitosan/poly(butyl cyanoacrylate) nanoparticles

Co-encapsulated doxorubicin (DOX) and curcumin (CUR) in poly(butyl cyanoacrylate) nanoparticles (PBCA-NPs) were prepared with emulsion polymerization and interfacial polymerization. The mean particle size and mean zeta potential of CUR-DOX-PBCA-NPs were 133 ± 5.34 nm in diameter and +32.23 ± 4.56 mV, respectively. The entrapment efficiencies of doxorubicin and curcumin were 49.98 ± 3.32% and 94.52 ± 3.14%, respectively. Anticancer activities and reversal efficacy of the formulations and various combination approaches were assessed using 3-[4,5-dimethylthiazol-2-yl] 2,5-diphenyltetrazolium bromide assay and western blotting. The results showed that the dual-agent loaded PBCA-NPs system had the similar cytotoxicity to co-administration of two single-agent loaded PBCA-NPs (DOX-PBCA-NPs+CUR-PBCA-NPs), which was slightly higher than that of the free drug combination (DOX+CUR) and one free drug/another agent loaded PBCA-NPs combination (DOX+CUR-PBCA-NPs or CUR+DOX-PBCA-NPs). The simultaneous administration of doxorubicin and curcumin achieved the highest reversal efficacy and down-regulation of P-glycoprotein in MCF-7/ADR cell lines, an MCF-7 breast carcer cell line resistant to adriamycin. Multidrug resistance can be enhanced by combination delivery of encapsulated cytotoxic drugs and reversal agents.     

Antiamnesic activity of nerve growth factor adsorbed on poly(butyl) cyanoacrylate nanoparticles coated with polysorbate-80

The antiamnesic activity of nerve growth factor (NGF) in various medicinal forms [aqueous NGF solution with and without polysorbate-80 (PS-80) additives, NGF adsorbed on poly(butyl) cyanoacrylate (PBCA) nanoparticles with and without PS-80 coating] has been studied in rats with model amnesia induced by scopolamine (2 mg/kg, s.c.). The antiamnesic activity was evaluated by the ability of subsequently introduced drugs (5 microg NGF per animal, i.p.) to inhibit the amnesic action of scopolamine as manifested by retrieval of the passive avoidance reflex (PAR) learned using the Lafayette Instruments USP system 30 min after drug injection. The PAR memory trace was evaluated as an increase in the latent time before visiting the dark compartment 24 h after drug injection. In the untreated amnesia control group, the scopolamine amnesia was manifested by the absence of any increase in the PAR latent time. In the form of an aqueous solution, NGF did not inhibit the scopolamine-induced amnesia. NGF adsorbed on uncoated PBCA and in the form of solution with PS-80 produced an antiamnesic action manifested by a reliable increase in the PAR latent time as compared to that in the untreated control group. NGF adsorbed on PBCA nanoparticles coated with PS-80 not only exhibited a significant antiamnesic effect, but even stimulated the cognitive function and increased the PAR latent time above the value in the learned control group.     

Treatment of glioblastoma with poly(isohexyl cyanoacrylate) nanoparticles

Glioblastomas belong to the most devastating cancer diseases. For this reason, polysorbate 80 (Tween 80)-coated poly(isohexyl cyanoacrylate) (PIHCA) (Monorex) nanoparticles loaded with doxorubicin were developed and tested for their use for the treatment of glioblastomas. The preparation of the nanoparticles resulted in spherical particles with high doxorubicin loading. The physico-chemical properties and the release of doxorubicin from the PIHCA-nanoparticles were analysed, and the influence on cell viability of the rat glioblastoma 101/8-cell line was investigated. In vitro, the empty nanoparticles did not show any toxicity, and the anti-cancer effects of the drug-loaded nanoparticles were increased in comparison to doxorubicin solution, represented by IC(50) values. The in vivo efficacy was then tested in intracranially glioblastoma 101/8-bearing rats. Rats were treated with 3 × 1.5mg/kg doxorubicin and were sacrificed 18 days after tumour transplantation. Histological and immunohistochemical analyses were carried out to assess the efficacy of the nanoparticles. Tumour size, proliferation activity, vessel density, necrotic areas, and expression of glial fibrillary acidic protein demonstrated that doxorubicin-loaded PIHCA-nanoparticles were much more efficient than the free drug. The results suggest that poly(isohexyl cyanoacrylate) nanoparticles hold great promise for the non-invasive therapy of human glioblastomas.     

Cytotoxicity of doxorubicin bound to poly(butyl cyanoacrylate) nanoparticles in rat glioma cell lines using different assays

The cytotoxicity of doxorubicin bound to poly(butyl cyanoacrylate) nanoparticles (Dox-PBCA-NP) was investigated in the rat glioma cell lines GS-9L, F-98 and RG-2. MTT and LDH assays were used as cytotoxic assays. In general, the cytotoxicity of nanoparticle-bound doxorubicin (Dox) was enhanced compared to the free drug in solution. However, responses of the cell lines towards the drug effects were different. In the case of free Dox in solution, this difference correlated with different intracellular concentrations of Dox, which in turn, depended on the level of P-glycoprotein (P-gp) expression in these cell lines. Accordingly, the 9L gliosarcoma (GS-9L) cells, which appeared to be most resistant towards Dox, were characterized by the highest P-gp expression.

Additionally, the influence of surfactants on the cytotoxic effect was investigated at different Dox concentrations. It was shown that the presence of polysorbate 80 (Tween® 80) in the nanoparticle formulation significantly enhanced the cytotoxicity, whereas poloxamer 188 (Pluronic® F68) and poloxamine 908 (Tetronic® 908) had a negligible influence.     

Cytotoxicity of doxorubicin bound to poly(butyl cyanoacrylate) nanoparticles in rat glioma cell lines using different assays

The cytotoxicity of doxorubicin bound to poly(butyl cyanoacrylate) nanoparticles (Dox-PBCA-NP) was investigated in the rat glioma cell lines GS-9L, F-98 and RG-2. MTT and LDH assays were used as cytotoxic assays. In general, the cytotoxicity of nanoparticle-bound doxorubicin (Dox) was enhanced compared to the free drug in solution. However, responses of the cell lines towards the drug effects were different. In the case of free Dox in solution, this difference correlated with different intracellular concentrations of Dox, which in turn, depended on the level of P-glycoprotein (P-gp) expression in these cell lines. Accordingly, the 9L gliosarcoma (GS-9L) cells, which appeared to be most resistant towards Dox, were characterized by the highest P-gp expression.Additionally, the influence of surfactants on the cytotoxic effect was investigated at different Dox concentrations. It was shown that the presence of polysorbate 80 (Tween 80) in the nanoparticle formulation significantly enhanced the cytotoxicity, whereas poloxamer 188 (Pluronic F68) and poloxamine 908 (Tetronic 908) had a negligible influence.     

Influence of surfactants,polymer and doxorubicin loading on the anti-tumour effect of poly(butyl cyanoacrylate) nanoparticles in a rat glioma model

Poly(n-butyl cyanoacrylate) nanoparticles coated with polysorbate-80 can enable the transport of bound drugs across the blood–brain barrier (BBB) after i.v. injection. In the present study the influence of different formulation parameters on the anti-tumoural effects of doxorubicin nanoparticles against glioblastoma 101/8 was investigated. The manufacturing parameters of poly(alkyl cyanoacrylate) doxorubicin-loaded nanoparticles were optimized concerning drug loading. The nanoparticles were coated with different surfactants and injected intravenously on days 2, 5 and 8 after intra-cranial implantation of glioblastoma 101/8 to rats. The survival times of all doxorubicin containing preparations, including a doxorubicin solution, increased the survival times significantly compared to untreated tumour-bearing rats. The most pronounced increase in survival was obtained with the poly(n-butyl cyanoacrylate) doxorubicin-loaded nanoparticles coated with polysorbate 80 and 35% of these animals survived for over 180 days (termination of the experiments). The other nanoparticle preparations yielded lower survival times. Poly(n-butyl cyanoacrylate) doxorubicin-loaded nanoparticles coated with polysorbate 80-coated proved to be very efficient against glioblastoma 101/8. The data suggest that the interaction of nanoparticles with the blood after injection as well as the enhanced permeability and retention effect (EPR effect) contributed differently to the anti-tumoural efficacy depending on nanoparticle formulation and surface properties.     

Influence of surfactants, polymer and doxorubicin loading on the anti-tumour effect of poly(butyl cyanoacrylate) nanoparticles in a rat glioma model

Poly(n-butyl cyanoacrylate) nanoparticles coated with polysorbate-80 can enable the transport of bound drugs across the blood-brain barrier (BBB) after i.v. injection. In the present study the influence of different formulation parameters on the anti-tumoural effects of doxorubicin nanoparticles against glioblastoma 101/8 was investigated. The manufacturing parameters of poly(alkyl cyanoacrylate) doxorubicin-loaded nanoparticles were optimized concerning drug loading. The nanoparticles were coated with different surfactants and injected intravenously on days 2, 5 and 8 after intra-cranial implantation of glioblastoma 101/8 to rats. The survival times of all doxorubicin containing preparations, including a doxorubicin solution, increased the survival times significantly compared to untreated tumour-bearing rats. The most pronounced increase in survival was obtained with the poly(n-butyl cyanoacrylate) doxorubicin-loaded nanoparticles coated with polysorbate 80 and 35% of these animals survived for over 180 days (termination of the experiments). The other nanoparticle preparations yielded lower survival times. Poly(n-butyl cyanoacrylate) doxorubicin-loaded nanoparticles coated with polysorbate 80-coated proved to be very efficient against glioblastoma 101/8. The data suggest that the interaction of nanoparticles with the blood after injection as well as the enhanced permeability and retention effect (EPR effect) contributed differently to the anti-tumoural efficacy depending on nanoparticle formulation and surface properties.     

Novel,dynamic on-line analytical separation system for dissolution of drugs from poly(lactic acid) nanoparticles

A novel method for investigating drug release in a dynamic manner from nanoparticles including, but not limited to, biodegradable poly(lactic acid) (PLA) is reported. The PLA nanoparticles were prepared by the nanoprecipitation method. Two poorly soluble drugs, beclomethasone dipropionate (BDP) and indomethacin, were encapsulated into PLA nanoparticles, and their dissolution from the nanoparticles were followed in a dynamic way. The on-line method comprised a short column (vessel) packed with the PLA nanoparticles, on-line connected to an analytical liquid chromatographic column via a multiport switching valve equipped with two loops. The system allowed monitoring of the drug release profiles in real time, and the conditions for the drug release could be precisely controlled and easily changed. The effects of solvent composition and temperature on the rate of dissolution of the drugs from the PLA nanoparticles were investigated. The system proved to be linear for the drugs tested over the concentration range 10–3000 ng (n = 6, R² = 0.999 and 0.997 for indomethacin and beclomethasone, respectively) and repeatable (RSD of peak areas <0.5%). The recoveries of the dissolution study were quantitative (120 and 103% for indomethacin and beclomethasone, respectively).     

Body distribution of polysorbate-80 and doxorubicin-loaded [14C]poly(butyl cyanoacrylate) nanoparticles after i.v. administration in rats

Previously it was shown that poly(butyl cyanoacrylate) (PBCA) nanoparticles coated with polysorbate 80 are able to cross the blood-brain barrier (BBB) after i.v. administration. The objective of the present study was to investigate the influence of polysorbate 80 and doxorubicin-loading on the body distribution in rats. The biodistribution profile and brain concentration of (14)C-radiolabeled PBCA nanoparticles, polysorbate 80 coated (14)C-PBCA nanoparticles, and doxorubicin-loaded (14)C-PBCA nanoparticles were determined by radioactivity counting after i.v. administration in rats. The (14)C-PBCA nanoparticles showed a significant accumulation in the organs of the reticuloendothelial system (RES). Polysorbate 80 coating of the (14)C-PBCA nanoparticles decreased this accumulation to about 40% after 1 h post injection. The brain concentration was increased about 2-fold after polysorbate 80-coating at this time point. The presence of doxorubicin in this preparation, however, decreased the brain concentration to levels similar to uncoated particles, probably caused by the positive charge of this compound. After longer time periods after injection the differences between the three preparations decreased.     

Toxicological studies of doxorubicin bound to polysorbate 80-coated poly(butyl cyanoacrylate) nanoparticles in healthy rats and rats with intracranial glioblastoma.

Polysorbate 80-coated poly(butyl cyanoacrylate) nanoparticles (NP) were shown to enable the transport of a number of drugs including the anti-tumour antibiotic doxorubicin (DOX) across the blood-brain barrier (BBB) to the brain after intravenous administration and to considerably reduce the growth of brain tumours in rats. The objective of the present study was to evaluate the acute toxicity of DOX associated with polysorbate 80-coated NP in healthy rats and to establish a therapeutic dose range for this formulation in rats with intracranially implanted 101/8 glioblastoma. Single intravenous administration of empty poly(butyl cyanoacrylate) NP in the dose range 100-400 mg/kg did not cause mortality within the period of observation. NP also did not affect body weight or weight of internal organs. Association of DOX with poly(butyl cyanoacrylate) NP did not produce significant changes of quantitative parameters of acute toxicity of the anti-tumour agent. Likewise, the presence of polysorbate 80 in the formulations was not associated with changes in toxicity compared with free or nanoparticulate drug. Dose regimen of 3x1.5 mg/kg on days 2, 5, 8 after tumour implantation did not cause drug-induced mortality. The results in tumour-bearing rats were similar to those in healthy rats. These results demonstrate that the toxicity of DOX bound to NP was similar or even lower than that of free DOX.     

Epirubicin loading in poly(butyl cyanoacrylate) nanoparticles manifests via altered intracellular localization and cellular response in cervical carcinoma (HeLa) cells

Objective: Drug loading into nanocarriers is used to facilitate drug delivery to target cells and organs. We have previously reported a change in cellular localization of epirubicin after loading to poly(butyl cyanoacrylate) (PBCA) nanoparticles. We aimed to further investigate the altered cellular localization and cellular responses to the described drug formulation.

Materials and methods: HeLa cells were treated with epirubicin-loaded PBCA nanoparticles prepared by the pre-polymerization method. A systematic study was performed to evaluate the formulation cytotoxicity. Cellular localization and uptake of the formulation as well as cellular response to the treatment were evaluated.

Results: Our studies revealed decreased cytotoxicity of the nanoparticle-formulated epirubicin compared to the free drug as well as a noticeable change in the drug’s intracellular localization. Epirubicin-loaded nanoparticles were internalized via endocytosis, accumulated inside endosomal vesicles and induced a two-fold stronger pro-apoptotic signal when compared to the free drug. The level of the tumor suppressor protein p53 in HeLa cells increased significantly upon treatment with free epirubicin, but remained relatively unchanged when cells were treated with equivalent dose of nanoparticle-loaded drug, suggesting a possible shift from p53-dependent DNA/RNA intercalation-based induction of cytotoxicity by free epirubicin to a caspase 3-induced cell death by the epirubicin-loaded PBCA formulation.     

Application possibilities of dynamic laser light scattering photometry for the examination of poly(ethylene glycol) suppositories

Status epilepticus is one of the most common neurologic emergencies in children, adolescents, and young adults. The advantage of diazepam suppository in medicinal therapy appears mainly in treatment of childhood epilepsy. A hydrophilic suppository base was investigated in solution by dynamic light scattering and results were compared to those of the membrane diffusion experiments measuring diazepam solubilization. According to the dynamic laser light scattering photometric measurements, the good solubilization effect of the macrogol mixture (5% Polysorbatum 20, 10% Macrogolum 400, 85% Macrogolum 1540) is explained by the formation of small, tight micellas. As the Polysorbatum 20 tenside resulted in the significant decrease (p < 0.05) of the formation of great micellas, its use led to the formation of small, tight, almost monodisperse micellas of 40-50 nm in the aqueous solution of the macrogol mixture.     

Evaluation of carrier capacity and release characteristics for poly( butyl 2-cyanoacrylate) nanoparticles

The characteristics of incorporation and adsorption of drugs onto poly(butyl 2-cyanoacrylate) nanoparticles has been studied using two model compounds, rose bengal and adriamycin. The maximum drug carrier capacity was found to be dependent on the method employed for loading of the compound, the nanoparticle composition, the compound itself and the pH of the solution. A linear correlation was found between the amount of compound incorporated into the nanoparticles and the time for 50% release. A novel bathocromic shift method (spectroscopy) has been used which enabled the concurrent determination of both free and nanoparticle bound compound without prior separation.     

Micellar aggregates of saponins from Chenopodium quinoa: characterization by dynamic light scattering and transmission electron microscopy

Entire seeds of Chenopodium quinoa Willd are a rich protein source and are also well-known for their high saponin content. Due to their amphiphily quinoa saponins are able to form intricate micellar aggregates in aqueous media. In this paper we study the aggregates formed by self-association of these compounds from two quinoa saponin fractions (FQ70 and FQ90) as well as several distinctive nanostructures obtained after their complexation with different ratios of cholesterol (CHOL) and phosphatidylcholine (PC). The FQ70 and FQ90 fractions were obtained by reversed-phase preparative chromatography. The structural features of their resulting aggregates were determined by Dynamic Light Scattering (DLS) and Transmission Electron Microscopy (TEM). Novel nanosized spherical vesicles formed by self-association with mean diameter about 100-200 nm were observed in FQ70 aqueous solutions whereas worm-like micelles an approximate width of 20 nm were detected in FQ90 aqueous solutions. Under experimental conditions similar to those reported for the preparation of Quillaja saponaria ISCOM matrices, tubular and ring-like micelles arose from FQ70:CHOL:PC and FQ90:CHOL:PC formulations, respectively. However, under these conditions no cage-like ISCOM matrices were observed. The saponin composition of FQ70 and FQ90 seems to determine the nanosized structures viewed by TEM. Phytolaccagenic acid, predominant in FQ70 and FQ90 fractions, is accountable for the formation of the nanosized vesicles and tubular structures observed by TEM in the aqueous solutions of both samples. Conversely, ring-like micelles observed in FQ90:CHOL:PC complexes can be attributed to the presence of less polar saponins present in FQ90, in particular those derived from oleanolic acid.