Skeletal Class III and open bite treated with bilateral sagittal split osteotomy and molar intrusion using titanium screws

Two-jaw surgery has been performed for the treatment of severe skeletal open bite cases to obtain stability of occlusion after treatment. If molar intrusion with titanium screws could be performed instead of surgical superior repositioning of the maxilla, the incidence of surgical invasion would be reduced. However, there have been few reports of such a therapy. This case report describes treatment for skeletal Class III and open bite with bilateral sagittal split osteotomy and intrusion of the molars using titanium screws. The patient had a concave profile, a long lower facial height, Class III malocclusion, and excessive anterior open bite following mandibular protrusion and a high mandibular plane angle. The mandible autorotated closed 3.5° following intrusion of the upper and lower molars using titanium screws during the presurgical orthodontic treatment phase. After the autorotation of the mandible, a mandibular setback with a bilateral sagittal split osteotomy was performed. The posttreatment records showed a good facial profile and occlusion. The mandible was stable 1 year after surgery. These results demonstrate that surgical orthodontic treatment combined with bilateral sagittal split osteotomy and intrusion of the molars using titanium screws can reduce the need for surgical invasion by avoidance of maxillary surgery and was effective for correcting the facial profile and occlusion in a skeletal Class III and open bite patient.     

Camouflage treatment for skeletal Class III patient with facial asymmetry using customized bracket based on CAD/CAM virtual orthodontic system:: A case report

When considering camouflage orthodontic treatment for Class III malocclusion with skeletal facial asymmetry, it is crucial to preserve the favorable compensated posterior occlusion. Once the inclination of the compensated occlusion is changed during orthodontic treatment, unstable occlusion, such as crossbite or scissor bite may occur. A 23-year-old female patient had anterior spacing with Class III malocclusion and a mandibular asymmetry. A nonsurgical approach was adopted. The treatment objectives were to establish a Class I molar relationship with compensated inclination of the posterior dentition and to correct the midline deviation. To achieve these goals, the computer-aided design/computer-aided manufacturing (CAD/CAM) orthodontic system plus customized brackets was applied, and miniscrews were used to distalize the left mandibular dentition for midline correction. The results suggested that the CAD/CAM-based customized brackets can be efficiently used in camouflage treatment to achieve a correct final occlusion.     

Nonsurgical treatment of a hyperdivergent skeletal Class III patient with mini-screw–assisted mandibular dentition distalization and flattening of the occlusal plane

Treatment of hyperdivergent skeletal Class III malocclusion is challenging for orthodontists, and orthognathic-orthodontic treatment is usually required. This report presents the successful nonsurgical treatment of a 20-year-old man who had a skeletal Class III malocclusion with anterior open bite, anterior and posterior crossbite, hyperdivergent growth pattern, steep occlusal plane, early loss of three first molars, and an uncommon convex profile with a retruded chin. An orthodontic camouflage treatment plan was chosen based on the etiology and the patient''s complaints. Tooth #37 was extracted. Miniscrews were used for uprighting and intruding of the lower molars, distalization of the lower dentition, and flattening of the occlusal plane. After 34 months of active treatment, Class I relationships, proper anterior overjet and overbite, flat occlusal plane, and an esthetic facial profile were achieved. The results demonstrated that the biomechanics involved in the nonsurgical treatment assisted with miniscrews to distalize the mandibular dentition and flatten the occlusal plane while keeping the mandibular plane stable was effective for treating this hyperdivergent skeletal Class III patient with a convex profile and anterior open bite.     

Orthodontic treatment combined with temporary anchorage device for a case of Class II with osteoarthrosis of the temporomandibular joint

An adult female patient presented with open bite at Orthodontic Clinic, Niigata University Medical and Dental Hospital. The patient was diagnosed as skeletal Class II open bite with Class III molar relationship, because of temporomandibular joint-osteoarthrosis (TMJ-OA) and the congenital absence of the mandibular lateral incisors. To correct anterior open bite, surgical orthodontic treatment was considered, but post treatment stability was unpredictable and doubtful due to condylar erosion on the CT. We therefore determined that nonsurgical treatment with maxillary first premolars extraction and plate type temporary anchorage device (TAD) placement bilaterally for intruding the maxillary molars would be indicated. At the completion of the active treatment, ideal occlusion was achieved without further resorption of the condyles. Even two years after the treatment, the stable occlusion has been maintained. In conclusion, the orthodontic treatment with TAD is one of the potent devices to provide the ideal occlusion for the patient with TMJ-OA.     

Nonsurgical orthodontic treatment of a hypodivergent adult patient with bilateral posterior scissors bite and excessive overjet

This report illustrates successful nonsurgical orthodontic treatment of a hypodivergent adult patient with bilateral posterior scissors bite (Brodie bite) and excessive overjet. A 26-year-old woman primarily reported maxillary incisor protrusion. She was diagnosed with Class ll division 1 malocclusion with skeletal Class I, short face, low mandibular plane angle and bilateral posterior scissors bite. A lingual arch with anterior bite block and posterior miniscrews with preadjusted edgewise appliances were used to improve the bilateral scissors bite. After achieving molar occlusion, the maxillary first premolars were extracted, and six miniscrews were used to improve the anterior-posterior and vertical discrepancies. After active treatment for 56 months, the convex facial profile with excessively protruded lips was improved and good interdigitation with ideal incisor relationship was achieved. Additionally, the irregular movements of the incisal path and the bilateral condyles during lateral excursion were improved. At 13 months of retention, a satisfactory facial profile, occlusion, and jaw movements were maintained. The treatment results suggest that miniscrews and fixed bite blocks were effective and efficient to facilitate correction of the bilateral scissors bite, excessive overjet, and vertical relationship correction in this nonsurgical orthodontic treatment.     

Influence of orthodontic treatment in the primary dentition upon development of the dentition and craniofacial growth

Thirty patients who underwent orthodontic treatment of the primary dentition were examined in this retrospective follow-up study. The mean age at the beginning of treatment was 4.4 (±1.1) years, and at follow-up 15.4 (±1.7) years. Different kinds of malocclusion were present.—Results: The early treatment lasted on average 12.3 (±7.2) months. Treatment time of Class III malocclusion and lateral crossbite was significantly shorter than that of Class II,1 malocclusion, functional Class II,2 malocclusion or anterior open bite (p<0.05). A Class I occlusion was achieved in 90% of the patients during treatment of the primary dentition. No patient treated successfully in the primary dentition showed any relapse to initial malocclusion.—Conclusion: These results suggest that changes in occlusion and mandibular position during treatment in the primary dentition are maintained in the mixed and permanent dentition. It can be concluded that a Class I occlusion following orthodontic treatment in the primary dentition serves as a basis for physiological development of the dentition and craniofacial growth.     

正畸治疗安氏Ⅲ类错伴下颌偏斜的临床研究

目的探讨治疗安氏Ⅲ类错伴有单侧的后牙反、锁和单侧前牙反的牙源性下颌偏斜的有效方法。方法选择安氏Ⅲ类错伴单侧的后牙反、锁和单侧前牙反等牙源性下颌偏斜患者21例,年龄8~25岁,平均15.5岁。单侧后牙反、锁引起的下颌偏斜通过上颌扩弓、上下牙交互牵引纠正宽度不调,促使下颌自行复位;前牙反通过Ⅲ类牵引予以解除。结果 21例患者均取得良好的矫治效果,治疗后颜面对称性和咬合关系恢复正常,颏点偏斜平均减少（2.9±0.6）mm,因长期错导致的下颌骨偏斜亦得到了明显改善。结论牙源性下颌偏斜,经过合理正畸治疗,随着单侧后牙反、锁及单侧前牙反的解除可得到明显的改善。     

Orthodontic treatment combined with mandibular distraction osteogenesis and changes in stomatognathic function

We performed an orthodontic treatment combined with mandibular distraction osteogenesis in a 15-year-old patient who wanted a correction of a chin deficiency and a protruding upper lip. The patient had an Angle Class II division 1 malocclusion with mandibular retrusion, a low mandibular plane angle, and scissors bite. First, a quad-helix appliance was applied to the mandibular dentition to correct the scissors bite in the bilateral premolar region. Later, a preadjusted edgewise appliance was applied to the maxillary and mandibular teeth. After 3 days, a mandibular distraction osteogenesis was performed. During and after the distraction, the open bite between the upper and lower dental arches was corrected using up and down elastics. The total treatment time with the edgewise appliance was 14 months. A skeletal Class I apical base relationship, good facial profile, and optimum intercuspation of the teeth were achieved with the treatment. The jaw-movement pattern on the frontal view did not change during gum chewing. However, the maximum gap without pain increased. The electromyographic (EMG) activity of the masseter and anterior temporalis muscles, and maximum occlusal force increased. The present case report suggests that an orthodontic treatment combined with mandibular distraction osteogenesis in a patient with mandibular retrusion in the late growth period might be effective for improving stomatognathic function.     

Idiopathic condylar resorption: Diagnosis, treatment protocol, and outcomes

Idiopathic condylar resorption is a poorly understood progressive disease that affects the TMJ and that can result in malocclusion, facial disfigurement, TMJ dysfunction, and pain. This article presents the diagnostic criteria for idiopathic condylar resorption and a new treatment protocol for management of this pathologic condition. Idiopathic condylar resorption most often occurs in teenage girls but can occur at any age, although rarely over the age of 40 years. These patients have a common facial morphology including: (1) high occlusal and mandibular plane angles, (2) progressively retruding mandible, and (3) Class II occlusion with or without open bite. Imaging usually demonstrates small resorbing condyles and TMJ articular disk dislocations. A specific treatment protocol has been developed to treat this condition that includes: (1) removal of hyperplastic synovial and bilaminar tissue; (2) disk repositioning and ligament repair; and (3) indicated orthognathic surgery to correct the functional and esthetic facial deformity. Patients with this condition respond well to the treatment protocol presented herein with elimination of the disease process. Two cases are presented to demonstrate this treatment protocol and outcomes that can be achieved. Idiopathic condylar resorption is a progressive disease that can be eliminated with the appropriate treatment protocol.     

Orthodontic-surgical treatment of Class III malocclusion with mandibular asymmetry

Class III skeletal malocclusion may present several etiologies, among which maxillary deficiency is the most frequent. Bone discrepancy may have an unfavorable impact on esthetics, which is frequently aggravated by the presence of accentuated facial asymmetries. This type of malocclusion is usually treated with association of Orthodontics and orthognathic surgery for correction of occlusion and facial esthetics. This report presents the treatment of a patient aged 15 years and 1 month with Class III skeletal malocclusion, having narrow maxilla, posterior open bite on the left side, anterior crossbite and unilateral posterior crossbite, accentuated negative dentoalveolar discrepancy in the maxillary arch, and maxillary and mandibular midline shift. Clinical examination also revealed maxillary hypoplasia, increased lower one third of the face, concave bone and facial profiles and facial asymmetry with mandibular deviation to the left side. The treatment was performed in three phases: presurgical orthodontic preparation, orthognathic surgery and orthodontic finishing. In reviewing the patient's final records, the major goals set at the beginning of treatment were successfully achieved, providing the patient with adequate masticatory function and pleasant facial esthetics.     

Severe anterior open bite malocclusion with multiple odontoma treated by C-lingual retractor and horseshoe mechanics

A fixed lever arm appliance called C-lingual retractor was placed on the lingual aspects of the maxillary anterior teeth in a 16-year-old male patient with a Class II anterior open bite malocclusion. The treatment plan consisted of extracting both upper first premolars and retracting the upper six anterior teeth. A multiple odontoma between the lower left lateral incisor and canine was surgically removed before orthodontic treatment, and a horseshoe appliance was used in the lower dentition for intermaxillary anchorage during the bone-healing period. The transpalatal arches soldered to the upper first and second molar bands were used as an intra-arch anchor unit for upper-space closure. Class II elastics were used buccally between the upper six anterior teeth and the lower horseshoe appliance. We took 13 months to treat the open bite malocclusion. There was a decrease in lip fullness as the upper anterior teeth were retracted, which contributed to a decrease in facial convexity. The treatment result was maintained six months after debonding. Details of the new appliance, clinical procedures, and treatment changes are presented.     

Posterior impaction with orthodontic miniscrews for openbite closure and improvement of facial profile

Skeletal anterior open bite is often caused by posterior dentoalveolar excess and downward and backward mandibular rotation. Orthodontic miniscrews can successfully impact the posterior dentition, allowing for open-bite correction through upward and forward mandibular autorotation. An Asian male, 27 years of age, with a Class II skeletal relationship, dolichocephalic facial type, high mandibular plane angle, 4.0-mm anterior open bite, and convex soft-tissue profile was treated with 4 dentoalveolar orthodontic miniscrews. The maxillary first and second molars were impacted 1.4 mm, resulting in open-bite closure, 2. 1 degrees of upward and forward mandibular autorotation, 2.0-mm advancement of pogonion, 3.5-degree reduction in soft-tissue facial convexity, and 2.6-mm increase in anteroposterior pharyngeal dimension on the lateral cephalogram. This case report demonstrates successful treatment with orthodontic miniscrews in open-bite closure with Class II correction, without extraction or surgically positioned miniplates. Miniscrew-supported posterior impaction and mandibular autorotation may become a viable treatment alternative to surgery in patients desiring improvement in their excessive dentofacial vertical dimension and facial esthetics.     

Correction of Unilateral Condylar Hyperplasia and Posterior Open Bite with Proportional Condylectomy and Fixed Orthodontic Treatment

A 29-year-old female patient with unilateral condylar hyperplasia (UCH) of the left side presented with facial asymmetry, maxillary transverse occlusal plane (MXTOP) cant, posterior open bite, and Class III relationship. Treatment consisted of proportional condylectomy of the left condyle for management of UCH, and fixed orthodontic treatment with intrusion of the left maxillary molars to correct the MXTOP cant and remaining chin point deviation (CPD). Proportional condylectomy with a 14-mm resection of the left condylar head improved the CPD from 11.5 mm to 7.8 mm and resolved the posterior open bite on the left side. However, it produced a Class II relationship on the right and left sides, posterior open bite on the right side, and anterior open bite. Fixed orthodontic treatment with 1.8-mm intrusion of the left maxillary molars using miniscrews corrected the MXTOP cant from 3.5 mm to 1.7 mm, reduced the remaining CPD from 7.8 mm to 3.7 mm, produced counterclockwise rotation of the mandible, and resolved the posterior open bite on the right side and the anterior open bite. After 16 months of total treatment, normal overbite/overjet and Class I relationship were obtained. Treatment results were well maintained after 5 years of retention. For the correction of UCH, it is important to determine the amount of condylar head resection and accurately simulate the correction of CPD and MXTOP cant through intrusion of the maxillary molars.     

Extreme skeletal open bite correction with vertical elastics

Severe skeletal open bites may be ideally treated with a combined surgical–orthodontic approach. Alternatively, compensations may be planned to camouflage the malocclusion with orthodontics alone. This case report describes the treatment of an 18-year-old man who presented with a severe open bite involving the anterior and posterior teeth up to the first molars, increased vertical dimension, bilateral Class III molar relationship, bilateral posterior crossbite, dental midline deviation, and absence of the maxillary right canine and the mandibular left first premolar. A treatment plan including the extraction of the mandibular right first premolar and based on uprighting and vertical control of the posterior teeth, combined with extrusion of the anterior teeth using multiloop edgewise archwire mechanics and elastics was chosen. After 6 months of alignment and 2 months of multiloop edgewise archwire mechanics, the open bite was significantly reduced. After 24 months of treatment, anterior teeth extrusion, posterior teeth intrusion, and counterclockwise mandibular rotation were accomplished. Satisfactory improvement of the overbite, overjet, sagittal malocclusion, and facial appearance were achieved. The mechanics used in this clinical case demonstrated good and stable results for open-bite correction at the 2-year posttreatment follow-up.     

Three-dimensional surgical guide approach to correcting skeletal Class II malocclusion with idiopathic condylar resorption

Treatment of skeletal Class II patients with dual bite and idiopathic condylar resorption (ICR) is challenging for orthodontists because of the unstable position of the mandible as well as skeletal relapse attributed to improper seating of the mandibular condyles. This case report describes the successful treatment of an 18-year-old Mongolian man diagnosed with centric relation–maximum intercuspation discrepancy and ICR. After making a definitive diagnosis from verified centric relation using bilateral manipulation, orthodontic treatment was initiated followed by three-dimensional computer-aided design/computer-aided manufacturing prebent titanium plate–guided sagittal split ramus osteotomy and genioplasty. Postoperative 3D superimposition demonstrated that this surgical guide approach provided accurate repositioning of the condyles, which were well positioned in the fossae. Complete orthodontic and surgical treatment time was 24 months. The patient''s facial appearance and occlusion improved significantly, and a stable result was obtained with a 1-year follow-up.     

Class III malocclusion with missing maxillary central incisor and facial asymmetry treated with orthodontics and intraoral vertical ramus osteotomy

A 28-year-old female with a Class III malocclusion and facial asymmetry was treated with orthodontics combined with intraoral vertical ramus osteotomy (IVRO). She had severe skeletal Class III (Wits: -9.7 mm). She was missing her maxillary left central incisor and had a fixed three-unit bridge on her maxillary anterior teeth. The patient presented a concave profile with a protrusive mandible. Her dental and mandibular midline was shifted 3 mm toward the left. After presurgical orthodontic treatment, IVRO was performed. The total active treatment time was 16 months including surgery. Both occlusion and facial appearance were significantly improved by the surgical-orthodontic treatment. Posttreatment records after 2 years showed excellent results with good, stable occlusion, facial balance and harmony, and long-term stability.     

Correction of collapsed occlusion with degenerative joint disease focused on the mandibular arch and timely relocation of a miniplate

This report describes a novel concept of 3-dimensional tooth movement by using biocreative therapy to provide unrestricted distal movement of the full mandibular dentition. The patient was a 26-year-old Korean woman with multiple problems, including a collapsed occlusion, a full-step Class III relationship with posterior open bite, a crossbite, temporomandibular joint pain, and a tendency for root resorption. Two orthodontic miniplates with tubes were initially placed on both retromolar pads for distalization; 1 miniplate was relocated to the anterior region for angulation and vertical control of the anterior teeth. The total treatment period was 13 months. The occlusion was finished in Class I molar and canine relationships with optimal overjet and overbite. Posttreatment records 2.5 years later showed a stable treatment outcome. The results suggest that an orthodontic miniplate is an efficient tool for the treatment of a collapsed occlusion by changing the affected arch only.     

The use of temporary anchorage devices for orthodontic treatment of high-angle Class III malocclusion in a patient with impacted upper canine teeth

This case report describes the orthodontic treatment of a 13-year-old female patient with high-angle Class III malocclusion, including anterior open bite and impacted upper canine teeth with a convex soft tissue profile. In this case, preadjusted edgewise appliances were placed after the extraction of the upper deciduous canine teeth, impacted upper canine teeth and lower first premolars. The upper and lower dental arches were aligned using a temporary anchorage device (TAD) for retraction and intrusion of the lower incisors avoiding the extrusion of the lower molars. A good facial profile and occlusion were achieved after active treatment.     

Treatment of class II malocclusion with open bite and absence of central maxillary incisor lost by trauma aided by use of orthodontic mini‐implants

The aim of this article is to report the clinical case of non‐surgical treatment of a Class II malocclusion with anterior open bite, associated with absence of a maxillary central incisor avulsed due to trauma. Treatment proceeded with the use of orthodontic mini‐implants as an anchorage device for intrusion of the maxillary molars and for mesial movement of the lateral incisor to replace the central incisor. Treatment resulted in good occlusion, with anterior and lateral guides, enhancement of the facial profile, and good dental esthetic appearance without the need for prosthetic treatment. The treatment outcome was satisfactory but needs long‐term or permanent retention.     

Condylar atrophy and osteoarthrosis after bimaxillary surgery

Radiographic evidence of condylar atrophy was seen in 12 patients out of 206 patients who underwent surgical orthodontic treatment. All 12 patients had the same dentofacial deformity, high-angle mandibular retrognathia (Class II open bite), and all but one had bimaxillary surgery. The etiologic factors are discussed. The dentofacial deformity is considered to be the main reason for condylar resorption, but orthognathic surgery is supposed to stimulate the progress of the disease by increased loading, disk displacement, and immobilization.