Rapid removal of DFO-chelated aluminum during hemodialysis using polysulfone dialyzers

Aluminum (Al) removal following deferoxamine (DFO) therapy in hemodialysis patients was evaluated in a paired-fashion comparing cuprophane (Travenol 12.11) and polysulfone (Fresenius F-80) dialyzers. QB and QD were held constant at 250 and 500 ml/min, respectively. The polysulfone dialyzer increased total plasma Al clearance from 20.0 +/- 2.8 to 80.5 +/- 7.6 ml/min (P less than 0.01), and reduced the t 1/2 of plasma Al during hemodialysis from 538 +/- 113 to 112 +/- 12 min (P less than 0.01). The polysulfone F-80 dialyzer increased Al removal during the first hour of hemodialysis from 518 +/- 191 to 1812 +/- 720 micrograms/hr (P less than 0.01). During a four hour hemodialysis the F-80 dialyzer returned plasma Al levels to pre-DFO values (103 +/- 36 vs. 93 +/- 23, P less than 0.05), suggesting complete removal of the DFO chelated Al complex. In one patient Al removal was evaluated using cuprophane, F-40, F-60 and F-80 dialyzers and the t 1/2 for Al removed decreased from 484.6 to 276.1 and 108 to 99 minutes, respectively. These data show the Fresenius F-80 polysulfone dialyzer effects the rapid removal of DFO-Al complexes. We propose use of the Fresenius F-80 dialyzer in conjunction with reduced DFO doses and i.m. administration of DFO the day prior to dialysis to limit DFO exposure as a method to decrease DFO-related side-effects in hemodialysis patients.     

Effect of body iron stores on serum aluminum level in hemodialysis patients.

To evaluate the influence of body iron stores on the serum aluminum (Al) level, we studied the correlation between iron status (the serum ferritin, serum iron and transferrin saturation) and serum Al levels in 68 severely anemic hemodialysis patients. Among them, 36 underwent the desferrioxamine (DFO) mobilization test. These 68 patients were divided into three groups according to their serum ferritin level. The basal Al level in the patient group was 41.4 +/- 37.4 micrograms/l (control, 4.1 +/- 2.4 micrograms/l). The serum Al level after DFO infusion of the patient group was 111.1 +/- 86.8 micrograms/l. A significantly higher basal Al and peak Al level after DFO infusion were found in group 1 patients (serum ferritin less than 300 micrograms/l) when compared to group 2 (serum ferritin 300-1,000 micrograms/l) and group 3 (serum ferritin greater than 1,000 micrograms/l) patients. A significant negative correlation between serum ferritin and basal serum Al (r = -0.544, p = 0.0001), as well as peak serum Al after DFO infusion (r = -0.556, p = 0.0001), was noted. Similarly, a negative relationship between serum Al (both basal and peak) and either serum iron or transferrin saturation was noted. However, there was no correlation between the serum Al level and the dosage of aluminum hydroxide. In conclusion, serum ferritin, serum iron and transferrin saturation were inversely correlated with serum Al in our hemodialysis patients. Iron deficiency may probably increase Al accumulation in these patients.     

High deposition rate of aluminum in tissues in diabetic hemodialysis patients

Aluminum (Al) accumulation in bone is a serious problem in patients on hemodialysis. We studied deferoxamine infusion test (DFO test) in 14 diabetic patients on hemodialysis (HDDM) and 23 hemodialysis patients originated from glomerulo nephritis (HDCGN) to determine whether Al accumulation is different between the two groups or not. There was no difference in hemodialysis duration and total oral intake of Al containing drugs between two groups. Serum C-terminal parathyroid hormone (C-PTH) in HDDM was lower than that in HDCGN group (1.82 +/- 1.30 vs. 3.80 +/- 1.82 ng/ml; P less than 0.01). However serum Al (s-Al) levels were comparable (61.9 +/- 53.0 vs, 45.0 +/- 32.3 micrograms/l). A significant correlation was observed between duration of dialysis period and s-Al in HDDM (r = 0.806, p less than 0.01), but in HDCGN, the relation was not significant. The patients in HDDM whose cumulative aluminum intake was less than 2.0 kg showed the higher serum A1 concentrations before DFO and greater increases in s-Al after DFO test, as compared with those in HDCGN with matched aluminum intake (93.8 +/- 67.6 vs. 35.9 +/- 23.6 micrograms/l; p less than 0.001 and 141.2 +/- 81.8 vs. 70.3 +/- 41.1 micrograms/l; p = 0.035). These results indicate that in uremic diabetic patients with lower intake of Al containing drugs, an early accumulation of Al in the whole body occurs possibly because of the enhanced absorption rate of Al at an intestine and/or the low PTH level.     

A new synthetic dialyzer with advanced permselectivity for enhanced low-molecular weight protein removal

Optimizing solute removal at minimized albumin loss is a major goal of dialyzer engineering. In a prospective, randomized, crossover study on eight patients (age 63 +/- 14 years) on maintenance hemodialysis, the new Baxter Xenium 170 high-flux dialyzer (BX), which contains a 1.7-m(2) PUREMA H dialysis membrane, was compared with two widely used reference high-flux dialyzers currently available for hemodialysis in North America, the Fresenius Optiflux 180 NR (FO) and the Gambro Polyflux 170 H (GP). Solute removal and biocompatibility were assessed in hemodialysis for 240 min at blood and dialysate flow rates of 300 and 500 mL/min, respectively. Additional ex vivo experiments detecting the interleukin-1beta (IL-1b) generation in recirculated donor blood were performed to demonstrate the pyrogen retention properties of the dialyzers. The instantaneous plasma clearances were similar for the three dialyzers except for cystatin c (cysc), for which a lower clearance was measured with FO as compared with BX and GP after 30 and 180 min of hemodialysis. The reduction ratios (RRs) corrected for the hemoconcentration of beta(2)-microglobulin and cysc were lower in FO (44 +/- 9 and 35 +/- 9%, respectively) versus BX (62 +/- 6 and 59 +/- 7%, respectively) and GP (61 +/- 7 and 56 +/- 8%, respectively). The RRs of the cytokine tumor necrosis factor alpha and interleukin-6 were not different between the dialyzers. The albumin loss was <300 mg for all filters. No differences between the dialyzers were found in the biocompatibility parameters showing very low leukocyte and complement activation. The ex vivo recirculation experiments revealed a significantly higher IL-1b generation for GP (710 +/- 585 pg/mL) versus BX (317 +/- 211 pg/mL) and FO (151 +/- 38 pg/mL). BX is characterized by a steep solute sieving profile with high low-molecular weight protein removal at virtually no albumin loss and an excellent biocompatibility. This improved performance may be regarded as a contribution to optimal dialysis therapy.     

Deferoxamine and coated charcoal hemoperfusion to remove aluminum in dialysis patients

We studied the in vitro and in vivo characteristics of aluminum (Al) removal by coated charcoal hemoperfusion (HP) in combination with intravenous deferoxamine (DFO). DFO enhanced the clearance of Al by HP in vitro after 180 minutes of perfusion with a solution containing 403.3 +/- 14.0 ng/ml of Al at 150 ml/min. The Al clearance was 139 +/- 1.0 ml/min with DFO and 49 +/- 10.0 ml/min (P less than 0.001) without DFO. Addition of DFO enhanced in vitro Al removal from 5.5 +/- 0.9 mg to 10.0 +/- 1.2 mg (P less than 0.05). During our in vivo studies, an HP device was in series in the dialysis circuit after a Cuprophan hemodialyzer. Eight patients with Al toxicity were studied on twelve occasions. Patients received DFO (40 mg/kg) 40 hours before the study. The total Al clearance with the combined hemodialysis (HD) and HP devices was higher than that obtained by the dialyzer alone at 30 minutes (62 +/- 4.9 ml/min vs. 25 +/- 2.5 ml/min, P less than 0.02) and after 180 to 210 minutes (32 +/- 3.0 ml/min vs. 19 +/- 2.9 ml/min, P less than 0.02). After 120 minutes the Al clearance by the HP device alone was significantly lower than the initial Al clearance by HP. Combined HD plus HP removed 2.9 +/- 0.4 mg of Al, whereas the total removal of Al by HD alone was 1.5 +/- 0.3 mg (P less than 0.01).     

The effect of desferrioxamine on concentration and distribution of aluminum in bone

Aluminum (Al) loaded rats were injected chronically with either desferrioxamine (DFO) or saline. Six rats of each treatment group were sacrificed before and after one, three, and nine months of treatment for determination of tissue and serum Al, and for histological localization of bone Al. Urinary Al was measured during one week before sacrifice. Al loading caused significant elevations of bone (136.2 +/- 22.0 micrograms/g) and liver (114.4 +/- 41.9 micrograms/g) aluminum. Serum Al in DFO-treated animals was not different from their controls (216.4 +/- 80.5 and 226.9 +/- 42.9 micrograms/liter after one month; 151.0 +/- 20.8 and 138.0 +/- 63.9 micrograms/liter after three months; 72.1 +/- 40.7 and 61.6 +/- 14.2 micrograms/liter after nine months in control and DFO-treated animals respectively). Urinary Al excretion in the DFO-treated group was increased at all times as compared to the control rats. A decrease of muscle Al occurred after one month of DFO treatment, but no significant differences of liver and bone Al could be shown between DFO-treated rats and their controls. Al decreased to a comparable degree in all tissues of both DFO and control rats after nine months of treatment. Histomorphometric examination of the bones showed that after one and three months of treatment, significantly less Al was localized at the calcification front of DFO-treated rats compared to their controls (75.6 +/- 6.9% and 53.4 +/- 20.9% after one month; 52.3 +/- 10.2% and 34.8 +/- 10.6% after three months in control and DFO rats respectively).(ABSTRACT TRUNCATED AT 250 WORDS)     

Severe dialyzer dysfunction undetectable by standard reprocessing validation tests

It is generally accepted that careful monitoring of total cell volume and ultrafiltration rates will ensure adequate function of reprocessed dialyzers. During routine urea kinetic measurements we noted that the percent of patients with clearances less than 200 ml/min increased from 5% to 48% despite adherence to these validation tests. As these patients did not have evidence of recirculation in the vascular access, possible causes of dialyzer dysfunction were investigated. Injection of methylene blue into the dialysate port revealed non-uniform flow of dialysate in dialyzers from patients with markedly reduced clearances. In vitro studies of dialyzers subjected to sequential daily reprocessing, without patient exposure, demonstrated that in vitro clearances declined in one lot but not another. The initial clearances of 218 +/- 4 ml/min fell progressively to 112 +/- 18 (P less than 0.001) after 15 reuses. No effects of reprocessing were found in a different lot (230 +/- 2 vs. 226 +/- 4 ml/min). Soaking the dialyzers from the affected lot in either the disinfectant or dialysate solution caused a decline in the clearances which was less than that of serial reuse. Although the magnitude of the problem of dialyzer malfunction with reuse is unknown, careful attention to dialyzer function is warranted in patients treated with reprocessed dialyzers.     

β-2-Microglobulin and Main Granulocyte Components in Hemodialysis Patients

Plasma levels of granulocyte elastase in complex with alpha 1-proteinase inhibitor (E-alpha 1-PI) increased during hemodialysis from 110 +/- 10 to 506 +/- 66 micrograms/L using dialyzers made of polyamide, from 95 +/- 2.2 to 211 +/- 54 micrograms/ml with hemophane and from 114 +/- 10 to 203 +/- 25 using dialyzers made of polysulfone. Plasma lactoferrin values were also significantly higher during hemodialysis with polyamide (772 +/- 110 micrograms/L) compared with hemophane (268 +/- 2.2) and the polysulfone (278 +/- 31 micrograms/L) dialyzer. After dialysis each dialyzer was rinsed. We found the lowest concentration of lactoferrin (902 +/- 254 micrograms/L) and E-alpha 1-PI (739 +/- 162 micrograms/L) after rinsing polysulfone dialyzers, whereas the highest concentrations were observed after rinsing the polyamide dialyzer (lactoferrin: 2,426 +/- 314; E-alpha 1-PI: 1,134 +/- 144 micrograms/L). Hemodialysis with polysulfone dialyzers caused significantly lower plasma levels of beta-2-microglobulin compared with polyamide or hemophane membranes despite significantly lower levels in the rinsing solutions. Our data indicate that low plasma levels of main granulocyte component observed with polysulfone and hemophane dialyzers are not the result of higher membrane adsorption of E-alpha 1-PI and lactoferrin. These main granulocyte components are not related to beta-2-microglobulin levels of both plasma and rinsing solutions.     

Dialyzer-dependent changes in solute and water permeability with bleach reprocessing

The effects of bleach reprocessing on the performance of high-flux dialyzers have not been comprehensively characterized. We compared the effects of automated bleach/formaldehyde reprocessing on solute and hydraulic permeability for cellulose triacetate (CT190) and polysulfone (F80B) dialyzers using an in vitro model. Dialyzers were studied after initial blood exposure (R0) and after 1 (R1), 5 (R5), 10 (R10), and 15 (R15) reuse cycles. Ultrafiltration coefficient (K(uf)), serial clearances, and/or sieving coefficients (SCs) of urea, creatinine, vancomycin, inulin, myoglobin, and albumin were determined. Urea, creatinine, and vancomycin clearances and SCs did not significantly differ from R0 to R15 with either dialyzer. Inulin clearances and SC also did not significantly change from R0 to R15 for the CT190. However, these same values for the F80B significantly increased (P < 0.05). The inulin clearance and SC values for the CT190 dialyzer were significantly higher than those for the F80B at all stages except R15. Myoglobin clearances significantly increased over 15 reuses for both dialyzers (P < 0.01). However, CT190 myoglobin clearances were significantly higher at all stages (R0 = 37.7 +/- 9.7; R15 = 52.5 +/- 8.8 mL/min) than the F80B (R0 = negligible; R15 = 41.3 +/- 16.5 mL/min; P < 0.01). Albumin pre- and postdialysis SCs significantly increased for both dialyzers (P < 0.01). K(uf) for R0 and R15 were 52.3 +/- 3.3 and 52.6 +/- 7.6 mL/h/mm Hg for CT190 (P = not significant) and 48.8 +/- 4.4 and 87.3 +/- 7.0 mL/h/mm Hg for F80B (P < 0.0001). We conclude that bleach reprocessing significantly increases larger solute and hydraulic permeability of high-flux cellulosic and polysulfone dialyzers. This effect is more pronounced for the polysulfone membrane. Until 10 reuses or greater, the removal of solutes greater than 1,500 d is significantly compromised with the polysulfone dialyzer used in this study.     

The effect of an iron supplement on serum aluminum level and desferrioxamine mobilization test in hemodialysis patients.

BACKGROUND: The serum aluminum (Al) measurement with desferrioxamine (DFO) mobilization is a screening test for uremic patients with an Al overload. In these patients, body iron status is one of the factors affecting the serum Al level. This study is designed to elucidate the effects of iron supplements on the serum Al and the DFO mobilization test. METHODS: Our study featured ten hemodialysis patients with iron deficiency anemia. The iron supplement was given intravenously with saccharated ferric oxide, 40 mg three times weekly, at the end of each hemodialysis. The total amount of iron supplement was 1,000 mg. All the patients underwent a DFO test at a dose of 5 mg/kg. The same test was repeated two weeks after completion of the iron supplement. RESULTS: After the iron supplement, patients' iron deficiency anemia improved with a serum ferritin elevation from 312.4 +/- 589.5 to 748.2 +/- 566.2 microg/L (p < 0.01), and iron saturation from 21.6 +/- 20.3 to 41.1 +/- 21.7% (p = 0.06). The basal serum Al level decreased from 34.3 +/- 13.8 to 21.8 +/- 8.5 microg/L (p = 0.01). In the DFO mobilization test, the peak serum Al level decreased from 63.4 +/- 19.3 to 50.7 +/- 20.5 microg/L (p < 0.01). The amount of Al increment (deltaAl) in DFO test was not changed (29.1 +/- 12.0 vs. 28.9 +/- 15.9 microg/L, p = 0.86). The change in basal Al level tended to negatively correlate with the percentage of increment in iron saturation (r = -0.628, p = 0.05). CONCLUSION: Results in this study suggest that iron supplements may significantly reduce the basal serum Al and peak Al in DFO mobilization test, without significant change of the mean deltaAl. The data presented indicate that in the interpretation of serum aluminum levels the iron status should be taken into account.     

Increasing the clearance of protein-bound solutes by addition of a sorbent to the dialysate

The capacity of sorbent systems to increase solute clearances above the levels that are provided by hemodialysis has not been well defined. This study assessed the extent to which solute clearances can be increased by addition of a sorbent to the dialysate. Attention was focused on the clearance of protein-bound solutes, which are cleared poorly by conventional hemodialysis. A reservoir that contained test solutes and artificial plasma was dialyzed first with the plasma flow set at 46 +/- 3 ml/min and the dialysate flow (Q(d)) set at 42 +/- 3 ml/min using a hollow fiber kidney with mass transfer area coefficients greater than Q(d) for each of the solutes. Under these conditions, the clearance of urea (Cl(urea)) was 34 +/- 1 ml/min, whereas the clearances of the protein-bound solutes indican (Cl(ind)), p-cresol sulfate (Cl(pcs)), and p-cresol (Cl(pc)) averaged only 5 +/- 1, 4 +/- 1, and 14 +/- 1 ml/min, respectively The effect of addition of activated charcoal to the dialysate then was compared with the effect of increasing Q(d) without addition of any sorbent. Addition of charcoal increased Cl(ind), Cl(pcs), and Cl(pc) to 12 +/- 1, 9 +/- 2, and 35 +/- 4 ml/min without changing Cl(urea). Increasing Q(d) without the addition of sorbent had a similar effect on the clearance of the protein-bound solutes. Mathematical modeling predicted these changes and showed that the maximal effect of addition of a sorbent to the dialysate is equivalent to that of an unlimited increase in Q(d). These results suggest that as an adjunct to conventional hemodialysis, addition of sorbents to the dialysate could increase the clearance of protein-bound solutes without greatly altering the clearance of unbound solutes.     

Removal of aluminum during hemodialysis: effect of different dialyzer membranes

Aluminum toxicity is now widely recognized as a major cause of morbidity in patients on maintenance hemodialysis. Desferrioxamine (DFO) chelation therapy has been suggested as a method of AI removal in such patients, though the most appropriate treatment schedule is yet to be established. In the present study, AI removal following DFO infusion was evaluated using two different dialyzer membranes to test the hypothesis that polyacrilonitrile (PAN) membranes permit better AI clearance. All patients studied had significantly elevated plasma AI concentrations (1.22 to 9.45 mumol/L; normal less than 0.56 mumol/L). Plasma AI did not correlate with estimated total AI intake. During hemodialysis with a cuprophane membrane, AI clearance ranged from 33.5 to 42.1 mL/min. Total AI removal was 192.2 +/- 90.4 mumol during cuprophane dialysis. During hemodialysis with a PAN membrane, AI clearance ranged from 35.7 to 54 mL/min. Total AI removal was 154.2 to 93.9 mumol during PAN dialysis. The differences in AI clearance and total AI removal were not statistically significant. It is concluded that use of a PAN membrane does not significantly enhance DFO-AI clearance.     

Solute transport in continuous hemodialysis: a new treatment for acute renal failure

A pumpless dialysis technique which combines continuous convection and diffusion was studied in 15 critically ill acute renal failure patients. Fluid identical in composition and purity to that used in peritoneal dialysis was continuously circulated (single-pass) at 16.6 cc/min through the dialysis compartment of a 0.43 m2 flat plate PAN membrane dialyzer. Whole blood clearances for urea, creatinine and phosphate averaged 25.3 +/- 4.4 cc/min, 24.1 +/- 5.5 cc/min and 21.3 +/- 5.6 cc/min, respectively. Over the range of blood flows studied (50 to 190 cc/min) clearances of these solutes were independent of blood flow rate but rather were determined by both dialysate flow rate and ultrafiltration rate. In contrast net fluxes of calcium and sodium were correlated only with ultrafiltration rate. Bicarbonate loss was 0.52 +/- 0.11 mEq/min; K+ balance varied with dialysate K+; glucose uptake from dialysate was 107 +/- 24.0 mg/min. In fresh non-clotting dialyzers, mean ultrafiltration rate was 8.1 cc/min. At QBi of 70 to 190 cc/min, dialysate and blood solute equilibrate yielding a total clearance equal to the dialysate outflow, or 25 cc/min, that is, the sum of dialysate flow rate plus ultrafiltration rate. In comparison to currently used continuous arteriovenous hemofiltration (CAVH), the exceptionally-high solute clearances obtained with continuous hemodialysis constitute a significant improvement in continuous renal replacement therapy.     

Solute clearances with high dialysate flow rates and glucose absorption from the dialysate in continuous arteriovenous hemodialysis.

The purpose of this study was to determine the effects of high inlet dialysate flow rates (IDFR) on the clearances of urea and creatinine and to measure the absorption of glucose through the dialyzer in continuous arteriovenous hemodialysis (CAVHD). Ten anuric acute renal failure patients in the intensive care unit were studied. Increasing the IDFR from 0 to 33.3 mL/min (0 to 2 L/h) produced linear increments in the clearances of urea and creatinine, whereas further increases in the IDFR from 33.3 to 66.7 mL/min (2 to 4 L/h) produced less important, but still significant, increases in the clearances. At 66.7 mL/min, the clearances for urea and creatinine were 48.5 +/- 3.4 and 42.2 +/- 2.5 mL/min, respectively. Using a dialysate with a glucose concentration of 25.3 mmol/L (0.5 g/dL), the net transfer of glucose through the dialyzer did not change significantly, from 16.7 to 66.7 mL/min of IDFR. Increasing the inlet dialysate glucose concentration from 25.3 to 75.8, 126.3, and 214.6 mmol/L (0.5 to 1.5, 2.5, and 4.25 g/dL) at a fixed IDFR of 16.7 mL/min produced linear increments in the net glucose transferred to the patient, from 0.12 +/- 0.02 to 0.67 +/- 0.05, 1.25 +/- 0.06 and 2.30 +/- 0.14 mmol/min, respectively (21.4, 121.0, 225.7, and 414.5 mg/min). No significant changes in the ultrafiltration and plasma flow rates through the dialyzer were recorded at these different IDFR or inlet dialysate glucose concentrations. Ten patients were treated for 4 days or more with 16.7 mL/min (1 L/h) IDFR CAVHD with excellent control over kidney function parameters.(ABSTRACT TRUNCATED AT 250 WORDS)     

High-flux dialysis lowers plasma leptin concentration in chronic dialysis patients

Leptin is a protein produced by fat cells and involved in body weight regulation. Plasma leptin is significantly higher in some hemodialysis (HD) patients than in normal controls. We examined the influence of dialyzer membrane biocompatibility and flux on elevated plasma leptin concentrations in hemodialysis patients. Employing a crossover design, leptin and tumor necrosis factor-alpha (TNF-alpha) levels were serially determined in eight chronic dialysis patients. Patients were dialyzed sequentially on low-flux cellulosic (TAF) dialyzers, low-flux (F8) polysulfone, high-flux (F80B) polysulfone, then low-flux polysulfone and cellulosic dialyzers again. Mean leptin concentrations were similar when low-flux polysulfone or cellulosic dialyzers were employed (141.9+/-24.2 microg/L versus 137.8+/-18.4 microg/L, respectively (P=NS). In contrast, leptin fell significantly on the high-flux polysulfone dialyzer (99.4+/-16.2 microg/L) compared with cellulosic (P < 0.005), and low-flux polysulfone dialyzers (P < 0.02). Leptin clearance by the high-flux polysulfone dialyzer was significantly higher than the low-flux dialyzers (50.4+/-21.5 v -9.6+/-10.3 mL/min; P=0.043), but did not account fully for the 30% decline in plasma leptin during the high-flux arm of the study. Concentrations of TNF-alpha were lower when high-flux polysulfone dialyzers were employed, but there was no correlation of individual TNF-alpha levels with leptin concentrations. High-flux dialysis lowers plasma leptin concentrations an average of 30%, but biocompatibility does not influence leptin levels. The decrease in plasma leptin on high-flux dialysis cannot be explained solely by enhanced clearance.     

Aluminium interference in the treatment of haemodialysis patients with recombinant human erythropoietin

In nine chronic haemodialysis patients a desferrioxamine (DFO) load test (40 mg/kg body-weight) was performed 1 year after the beginning of treatment with recombinant human erythropoietin (rHuEpo). The patients were then divided into two groups. Group A comprised five patients with a greater mean aluminium (204 +/- 28 micrograms/l) than the four patients in group B. Group A was given a mean dose of 25.8 g (range 14-39 g) of DFO over 6 months. Group B (aluminium values 112 +/- 36 micrograms/l) was never treated with DFO. During the period of observation, plasma iron, serum ferritin and transferrin, as well as iron supplementation, did not differ between the groups. After DFO treatment a second DFO load test was performed. The mean predialysis aluminium value was significantly reduced in group A (204 +/- 28 vs 111 +/- 72 micrograms/l; P less than 0.05), while remaining unchanged in group B (112 +/- 36 vs 140 +/- 39 micrograms/l; P = ns). In both groups, the doses of rHuEpo necessary to maintain the same haemoglobin values decreased with time, but reduced significantly only in group A (298 +/- 105 vs 110 +/- 61 mu/kg per week; delta -63%; P less than 0.01). Thus, aluminium interferes with the response to rHuEpo in haemodialysis patients, and the correction of aluminium overload with DFO can allow a considerable sparing of rHuEpo.     

Systemic Levels of Tumor Necrosis Factor Alpha During Hemodialysis with Cellulosic Membranes: No Effect of the Sterilization Procedure

Extractable constituents of dialyzer membranes (e.g., monomers and beta-glucans) may induce the production of cytokines in vitro. We therefore studied circulating tumor necrosis factor alpha (TNF alpha) levels in 23 stable hemodialysis patients during treatment with dry Cuprophan membranes (ETO-sterilized n = 10, steam-sterilized n = 13) longitudinally over a period of 4 weeks. After 4 weeks, those 5 patients of each group showing the highest TNF alpha levels were switched to steam-sterilized, wet Cuprophan membranes. No significant increase in plasma TNF alpha was observed during hemodialysis with either ETO- or steam-sterilized dry Cuprophan membranes. A substantial TNF alpha increase (> or = 100% compared to pre-HD values), however, was observed during 14 of 84 treatment sessions. In 5 selected patients with ETO-sterilized, dry Cuprophan dialyzers, TNF alpha rose from (mean +/- SEM) 17.2 +/- 3.0 (pre-HD) to 20.9 +/- 6.2 (120 min) and 21.9 +/- 4.5 pg/ml (240 min). Corresponding levels in patients with steam-sterilized, dry Cuprophan were 16.2 +/- 5.4 (pre-HD), 21.9 +/- 6.8 (120 min), and 16.0 +/- 3.7 pg/ml (240 min), respectively. There was no difference between ETO- and steam-sterilized dialyzers. No significant reduction in mean TNF alpha plasma levels or in frequency of elevated peak levels was achieved when these patients were switched to wet Cuprophan dialyzers for another 4 weeks. It is suggested that an induction of elevated TNF alpha levels during hemodialysis is possible but is not observed regularly during treatment with Cuprophan membranes.(ABSTRACT TRUNCATED AT 250 WORDS)     

Plasma levels of pancreatic secretory trypsin inhibitor in relation to amylase and lipase in patients with acute and chronic renal failure

Plasma levels of pancreatic secretory trypsin inhibitor (PSTI), lipase and amylase were measured in patients with chronic renal failure (CRF), patients undergoing regular hemodialysis treatment (RDT) or continuous ambulatory peritoneal dialysis (CAPD), patients with acute renal failure (ARF) and patients following successful cadaveric kidney transplantation. Plasma PSTI values were 9.2 +/- 0.8 ng/ml in controls (CO), 156.9 +/- 16.2 ng/ml in CRF patients, 257.6 +/- 22.3 ng/ml in RDT patients, 376.8 +/- 57.5 ng/ml in CAPD patients and 2,300 +/- 276.9 ng/ml in patients with posttraumatic ARF. RDT patients with malignant diseases displayed significantly higher PSTI values (1,014 +/- 148.7 ng/ml; p less than 0.01) than RDT patients without malignancy. Transplant patients with normal kidney function (creatinine 1.25 +/- 0.1 mg/dl) showed significantly lower PSTI values (16.7 +/- 2.1 ng/ml) than transplant patients with impaired renal function (creatinine 4.7 +/- 0.5 mg/dl; PSTI 72.8 +/- 11.8 ng/ml; p less than 0.01). Daily urinary excretion of PSTI increased from 26.7 +/- 3.1 micrograms (CO) to 551.8 +/- 54.8 micrograms in CRF patients. In CAPD patients, daily peritoneal loss of PSTI was 164.3 +/- 58.4 micrograms. Plasma PSTI values increased during hemodialysis with dialyzers made of cuprophan (317.0 +/- 32.6 vs. 422.0 +/- 46.2 ng/ml; p less than 0.05) and decreased with polysulfone dialyzers (226.6 +/- 19.9 vs. 86.6 +/- 18.1 ng/ml). There was no correlation between PSTI and urea, creatinine, lipase or amylase in each tested group. Our results document markedly elevated plasma PSTI values in all forms of renal insufficiency, suggesting extrapancreatic PSTI production and/or reduced renal elimination.     

Aluminum removal with hemodialysis, hemofiltration and charcoal hemoperfusion in uremic patients after desferrioxamine infusion. A comparison of efficiency

In order to compare the effectiveness of aluminum removal in uremic patients during extracorporeal treatment, 17 patients with endstage renal failure were given a desferrioxamine infusion of 40 mg/kg body weight after an ordinary dialysis treatment. Forty-eight hours later 7 patients were treated with hemodialysis, 6 with hemofiltration and 4 with a combination of hemodialysis and hemoperfusion. The clearance of aluminum was measured at different intervals. It was found that the aluminum clearance was 75 +/- 18 ml/min in hemofiltration compared to 30 +/- 10 ml/min in hemodialysis (p less than 0.001). A combination of hemodialysis and hemoperfusion with a charcoal column containing 100 g activated charcoal in series gave a total aluminum clearance of 56 +/- 11 ml/min. The total amount of aluminum in the ultrafiltrate after hemofiltration was found to be approximately 3 times as high (1,728 +/- 156 micrograms) as the total amount of aluminum in the hemodialysis water that had passed a single pass system during a 4-hour dialysis (576 +/- 104 micrograms). Our results indicate that hemofiltration or a combination of hemodialysis and hemoperfusion should be used to remove aluminum in patients with signs of severe aluminum accumulation such as encephalopathy or painful bone disease, because these methods are 2-3 times as effective as ordinary hemodialysis. In patients where aluminum has been accumulated but no severe symptoms occur hemodialysis gives a significant clearance of the aluminum desferrioxamine complex.