Dust exposure and pneumoconiosis in a South African pottery. 1. Study objectives and dust exposure.

Dust exposure and pneumoconiosis were investigated in a South African pottery that manufactured wall tiles and bathroom fittings. This paper describes the objectives of the investigation and presents dust measurement data. x Ray diffraction showed that the clays used by the pottery had a high quartz content (range 58%-23%, mean 38%). Exposure to respirable dust was measured for 43 workers and was highest (6.6 mg/m3) in a bathroom fitting fettler. Quartz concentrations in excess of 0.1 mg/m3 were found in all sections of the manufacturing process from slip production to biscuit firing and sorting. The proportion of quartz in the respirable dust of these sections was 24% to 33%. This is higher than is usually reported in English potteries. Four hundred and six (80%) of the 509 workers employed at the pottery were potentially at risk of occupational lung disease. The finding of large numbers of pottery workers exposed to unacceptable dust concentrations is not surprising as poor dust control was found in all six wall tile and sanitary ware factories surveyed by the National Centre for Occupational Health between 1973 and 1989. Dust related occupational disease can be expected in potters for many years to come.     

High exposure to respirable dust and quartz in a labour-intensive coal mine in Tanzania

Labour-intensive mines are numerous in several developing countries, but dust exposure in such mines has not been adequately characterized. The aim of this study was to identify and quantify the determinants of respirable dust and quartz exposure among underground coal mine workers in Tanzania. Personal respirable dust samples (n = 134) were collected from 90 underground workers in June-August 2003 and July-August 2004. The development team had higher exposure to respirable dust and quartz (geometric means 1.80 and 0.073 mg m(-3), respectively) than the mining team (0.47 and 0.013 mg m(-3)), the underground transport team (0.14 and 0.006 mg m(-3)) and the underground maintenance team (0.58 and 0.016 mg m(-3)). The percentages of samples above the threshold limit values (TLVs) of 0.9 mg m(-3) for respirable bituminous coal dust and 0.05 mg m(-3) for respirable quartz, respectively, were higher in the development team (55 and 47%) than in the mining team (20 and 9%). No sample for the underground transport team exceeded the TLV. Drilling in the development was the work task associated with the highest exposure to respirable dust and quartz (17.37 and 0.611 mg m(-3), respectively). Exposure models were constructed using multiple regression model analysis, with log-transformed data on either respirable dust or quartz as the dependent variable and tasks performed as the independent variables. The models for the development section showed that blasting and pneumatic drilling times were major determinants of respirable dust and quartz, explaining 45.2 and 40.7% of the variance, respectively. In the mining team, only blasting significantly determined respirable dust. Immediate actions for improvements are suggested to include implementing effective dust control together with improved training and education programmes for the workers. Dust and quartz in this underground mine should be controlled by giving priority to workers performing drilling and blasting in the development sections of the mine.     

Cross-sectional silica exposure measurements at two Zambian copper mines of Nkana and Mufulira

We measured the quartz content of 20 bulk settled dust and 200 respirable dust samples in a cross-sectional dust exposure assessment that is part of an epidemiological study to ascertain the risk of nonmalignant respiratory diseases among Zambian copper miners. Dust samples were collected from the copper mines of Mopani Copper Mine plc (Mufulira and Nkana Mines). Analytical measurements employed NIOSH Method 0600 for gravimetric analysis of respirable dust and NIOSH Method 7500 for quartz analysis in bulk and respirable dust samples. The measured quartz content of respirable dust showed that 59% and 26% of Mufulira and Nkana Mine samples, respectively, were above the calculated U.S. Occupational Safety and Health Administration permissible exposure limit. The mean intensities of respirable dust exposure at Mufulira and Nkana were 0.992 mg/m3 (range 0-7.674) and 0.868 mg/m3 (range 0-6.944), respectively while the mean intensities of respirable quartz at Mufulira and Nkana were 0.143 mg/m3 (range 0-1.302) and 0.060 mg/m3 (range 0-0.317), respectively. These results indicate weak dust monitoring at these mines which may increase the risk of nonmalignant disease in many miners. Since Zambian mining regulations do not have crystalline silica exposure limits, these results accord with the recommendation that Zambian mining houses and the government establish crystalline silica analysis laboratory capacity and adopt dust mass concentration occupational exposure limits for more protective dust monitoring of workers.     

Quartz and dust exposure in Swedish iron foundries

Exposure to respirable quartz continues to be a major concern in the Swedish iron foundry industry. Recommendations for reducing the European occupational exposure limit (EU-OEL) to 0.05 mg/m3 and the corresponding ACGIH(R) threshold limit value (ACGIH-TLV) to 0.025 mg/m3 prompted this exposure survey. Occupational exposure to respirable dust and respirable quartz were determined in 11 Swedish iron foundries, representing different sizes of industrial operation and different manufacturing techniques. In total, 436 respirable dust and 435 respirable quartz exposure measurements associated with all job titles were carried out and are presented as time-weighted averages. Our sampling strategy enabled us to evaluate the use of respirators in certain jobs, thus determining actual exposure. In addition, measurements using real-time dust monitors were made for high exposure jobs. For respirable quartz, 23% of all the measurements exceeded the EU-OEL, and 56% exceeded the ACGIH-TLV. The overall geometric mean (GM) for the quartz levels was 0.028 mg/m3, ranging from 0.003 to 2.1 mg/m3. Fettler and furnace and ladle repair operatives were exposed to the highest levels of both respirable dust (GM = 0.69 and 1.2 mg/m3; range 0.076-31 and 0.25-9.3 mg/m3 and respirable quartz (GM = 0.041 and 0.052 mg/m3; range 0.004-2.1 and 0.0098-0.83 mg/m3. Fettlers often used respirators and their actual quartz exposure was lower (range 0.003-0.21 mg/m3, but in some cases it still exceeded the Swedish OEL (0.1 mg/m3. For furnace and ladle repair operatives, the actual quartz exposure did not exceed the OEL (range 0.003-0.08 mg/m3, but most respirators provided insufficient protection, i.e., factors less than 200. In summary, measurements in Swedish iron foundries revealed high exposures to respirable quartz, in particular for fettlers and furnace and ladle repair workers. The suggested EU-OEL and the ACGIH-TLV were exceeded in, respectively, 23% and 56% of all measurements regardless of the type of foundry. Further work on elimination techniques to reduce quartz concentrations, along with control of personal protection equipment, is essential.     

Variability of exposure and estimation of cumulative exposure in a manually operated coal mine

This study aims at estimating variability in exposure to respirable dust and assessing whether the a priori grouping by job team is appropriate for an exposure-response study on respiratory effects among workers in a manually operated coal mine in Tanzania. Furthermore, estimated exposure levels were used to calculate cumulative exposure. Full-shift personal respirable dust samples (n = 204) were collected from 141 randomly chosen workers at underground and surface work sites. The geometric mean exposure for respirable dust varied from 0.07 mg m(-3) for office workers to 1.96 mg m(-3) for the development team. The analogous range of respirable quartz exposure was 0.006-0.073 mg m(-3). Variance components were estimated using random effect models. For most job teams the within-worker variance component was considerably higher than the between-worker variance component. For respirable dust the estimated attenuation of the linear exposure-response relationship was low (5.9%) when grouping by job team. Grouping by job team was considered appropriate for studying the association between current dust exposure and respiratory effects. Based on the estimated worker-specific mean exposure in the job teams, the arithmetic mean cumulative exposure for the 299 workers who participated in the epidemiological part of the study was 38.1 mg* yr m(-3) for respirable dust and 2.0 mg* yr m(-3) for quartz.     

Lung disorders of workers exposed to rush smear dust in China

The aim of this study was to evaluate the lung disorders of the workers exposed to rush smear dust. A cross sectional study was carried out on 1,709 current workers (788 male, 921 female) in 80 factories. All subjects were asked by questionnaire, and health examination including chest X-ray was conducted for 661 workers in 35 factories. Lung function test was also examined for 119 non-smoking males among 661 subjects. Dust samplings were collected and total and respirable dust concentrations at 127 spots in 35 factories were measured. The geometric mean dust concentration in the workshops was up to 20.00 mg/m(3), and the geometric mean respirable dust concentration reached 8.22 mg/m(3). The mean quartz concentration of accumulated dust was 29.2%. The prevalence of radiographic small opacities profusion category > or = 1/0, according to the ILO 1980 Classification System, was 2.6% among 661 employees. One worker was found to have pneumoconiotic findings of 2/2 profusion accompanied with large opacity. The prevalence of pneumoconiosis (1/0 or more) correlated with cumulative dust exposure (r=0.192, p<0.0001). The similar relationship was found between the prevalence rate of cough or sputa and worksite dust concentration. In non-smokers, a positive association was found between the prevalence of cough and occupational exposure duration (r=0.080, p=0.004). Approximately 19.3% and 34.5% of employees suffered from respiratory impairment for FVC and FEV1.0, respectively. This is the first report of "rush" pneumoconiosis in China. Rush mat workers were found to be at high risk for pneumoconiosis, a preventable disease. Our results showed a dose-response relationship between rush-mat dust level and the prevalence of pneumoconiosis. Similar relationship between the prevalence of cough and sputum and the work duration was found for non-smoking workers but not for smoking workers.     

Radiologic abnormalities in South African mica millers: a survey of a mica milling plant in the Limpopo Province

All 73 workers at a South African mica milling plant were surveyed for radiographic evidence of abnormalities related to dust exposures at work. Chest x-rays were taken and questionnaires administered to determine occupational and environmental exposure histories. Dust levels to which workers were exposed were measured. All but one of 12 airborne inhalable and respirable dust levels were below the occupational exposure limits (OEL-RLs) of 10 mg/m3 and 5 mg/m3 respectively. The mica concentrations were below the OEL-RL of 1 mg/m3 for respirable mica. Mean age and service duration of the workers were 45 and 14 years, respectively. 19 workers (27%) had changes referable to their exposures to asbestos, mica, silica, or combinations. Of these, four showed additional radiographic changes in keeping with tuberculous lung scarring. Six had evidence of lung changes consistent with past tuberculosis alone. Rates of radiologic abnormalities were higher in older workers and those with longer service. An association between mica and radiologic changes could not be convincingly shown because of the nature of the survey and the co-exposure to other mineral dusts. Nevertheless, six workers had radiologic changes consistent with pneumoconiosis attributable to mica or the combination of mica and silica.     

Evaluation of the approach to respirable quartz exposure control in U.S. coal mines

Occupational exposure to high levels of respirable quartz can result in respiratory and other diseases in humans. The Mine Safety and Health Adminstration (MSHA) regulates exposure to respirable quartz in coal mines indirectly through reductions in the respirable coal mine dust exposure limit based on the content of quartz in the airborne respirable dust. This reduction is implemented when the quartz content of airborne respirable dust exceeds 5% by weight. The intent of this dust standard reduction is to restrict miners' exposure to respirable quartz to a time-weighted average concentration of 100 μg/m(3). The effectiveness of this indirect approach to control quartz exposure was evaluated by analyzing respirable dust samples collected by MSHA inspectors from 1995 through 2008. The performance of the current regulatory approach was found to be lacking due to the use of a variable property-quartz content in airborne dust-to establish a standard for subsequent exposures. In one situation, 11.7% (4370/37,346) of samples that were below the applicable respirable coal mine dust exposure limit exceeded 100 μg/m(3) quartz. In a second situation, 4.4% (895/20,560) of samples with 5% or less quartz content in the airborne respirable dust exceeded 100 μg/m(3) quartz. In these two situations, the samples exceeding 100 μg/m(3) quartz were not subject to any potential compliance action. Therefore, the current respirable quartz exposure control approach does not reliably maintain miner exposure below 100 μg/m(3) quartz. A separate and specific respirable quartz exposure standard may improve control of coal miners' occupational exposure to respirable quartz.     

Dust exposure and pneumoconiosis in a South African pottery. 2. Pneumoconiosis and factors influencing reading of radiological opacities.

A cross sectional radiological survey of workers exposed to pottery dust during the manufacture of wall tiles and bathroom fittings was conducted in a South African factory. Roughly one third of workers with 15 or more years of service in high dust sections of the factory had pneumoconiosis. Previously undiagnosed advanced cases, including two with progressive massive fibrosis, were working in dusty occupations. A firm diagnosis of potters' pneumoconiosis was made in 11 of the 358 workers radiographed; all had served more than 10 years suggesting that radiography of workers with more than 10 years service would be a successful case finding strategy in South Africa. A combination of rounded and irregular opacities was the most common radiological finding in the workers with pneumoconiosis (55%). Three readers reported on the chest radiographs, and all found an association between small radiological opacities, which were usually irregular or a combination of irregular and rounded, and exposure to pottery dust. The occurrence of irregular radiological opacities in workers exposed to pottery dust deserves further study. The least experienced reader significantly associated age with small opacities when duration of service (years) was used to measure exposure to dust. Sex was not an important predictor of radiological changes consistent with pneumoconiosis. Breast shadows were not an important cause of false positive readings and participating women did not develop pneumoconiosis after less exposure than men.     

Dust exposure and pneumoconiosis in a South African pottery. 2. Pneumoconiosis and factors influencing reading of radiological opacities.

A cross sectional radiological survey of workers exposed to pottery dust during the manufacture of wall tiles and bathroom fittings was conducted in a South African factory. Roughly one third of workers with 15 or more years of service in high dust sections of the factory had pneumoconiosis. Previously undiagnosed advanced cases, including two with progressive massive fibrosis, were working in dusty occupations. A firm diagnosis of potters' pneumoconiosis was made in 11 of the 358 workers radiographed; all had served more than 10 years suggesting that radiography of workers with more than 10 years service would be a successful case finding strategy in South Africa. A combination of rounded and irregular opacities was the most common radiological finding in the workers with pneumoconiosis (55%). Three readers reported on the chest radiographs, and all found an association between small radiological opacities, which were usually irregular or a combination of irregular and rounded, and exposure to pottery dust. The occurrence of irregular radiological opacities in workers exposed to pottery dust deserves further study. The least experienced reader significantly associated age with small opacities when duration of service (years) was used to measure exposure to dust. Sex was not an important predictor of radiological changes consistent with pneumoconiosis. Breast shadows were not an important cause of false positive readings and participating women did not develop pneumoconiosis after less exposure than men.     

Occupational exposure to dust in quartz manufacturing industry.

Owing to the abundance of a sedimentary rock, 65 small-scale quartz manufacturing enterprises, employing 650 workers, have been established in the region studied. Quartz powder manufacturing involves various processes and operations, such as manual handling of quartz stones, crushing, grinding, sieving, screening, mixing, storing and bagging. Results demonstrate that each of these operations generates high concentrations of airborne 'total' dust and respirable dust, which contain a very high percentage (> 75%) free silica. The estimated average exposure to airborne 'total' dust was 22.5 mg m-3 (Permissible Limit of Exposure 1.08 mg m-3), and respirable dust 2.93 mg m-3 (PLE 0.36 mg m-3). This shows that 'total' dust exposure was 7.7 times higher than respirable dust. Since the present work systems and practices may pose a serious health risk to the workers, public and the environment, suitable preventive and control measures have been suggested for improvement in the workplace.     

Determination of exposure to respirable quartz in the stone crushing units at Azendarian-West of Iran

The purpose of this study is to describe the personal exposure to respirable dust and quartz and in stone crushing units located at west of Iran. A size of 40 personal samples and 40 stationary samples were obtained and analysis was done by X-ray diffraction (XRD). The results of personal sampling were shown the concentrations of respirable dust exposure level in workers of process, hopper and drivers were 1.90, 2.22, 1.41 times greater than Occupational Safety and Health Administration permissible exposure limit (OSHA PEL). The average value of total dust and respirable dust emission from stationary sources was 9.46 mg/m(3), 1.24 mg/m(3) respectively, showing that 13.8 % of total dust is respirable. The efficiency of local exhaust ventilation (LEV) to control of particles inside of industrial units was greater than 99%. It is concluded from this research the particulate generated from stone crushing activities contain a significant amount of respirable particle. The amount of free silica in stone quartz is 85 to 97 percent that emission of particles effect to health workers. LEV has important effect in the removal of silica particles in stone crushing units. The worker of hoppers still exposed to silica more than standard limits.     

Dust exposure and respiratory health effects in cement production

Dust can be produced by almost all production processes in Portland cement factory. Dust exposure potentially can affect respiratory function. But evidence for respiratory effect of cement dust exposure has not been conclusive. In this study we assessed effect of cement dust exposure on respiratory function in a cement production factory. A respiratory symptoms questionnaire was completed and pulmonary function tests were carried out on 94 exposed and 54 non exposed workers at a cement factory in the east of Iran. Additionally, respirable dust level was determined by the gravimetric method. X-ray fluorescence (XRF) technique was performed to determine the silica phases and the SiO(2) contents of the bulk samples. The arithmetic means (AM) of personal respirable dust were 30.18 mg/m(3) in the crushing, 27 mg/m(3) in the packing, 5.4 mg/m(3) in the cement mill, 5.9 mg/m(3) in the kiln and 5.48 mg/m(3) in the maintenance that were higher than threshold limit value (TLV) of the American Conference of Governmental Industrial Hygienists (ACGIH) which is 5 mg/m(3). This value in the unexposed group was 0.93 mg/m(3). In this study cough, sputum, wheezing and dyspnea were more prevalent among exposed subjects. Exposed workers compared to the unexposed group showed significant reduction in Forced Expiratory Volume in one second (FEV(1)), Forced Vital Capacity (FVC), and Forced Expiratory Flow between 25% and 75% of the FVC (FEF(25-75%)) (P<0.05). It can be concluded that in our study there was close and direct association between cement dust exposure and functional impairment among the cement factory workers.     

陶工尘肺危险度及其防制措施评价

８个陶瓷厂矿队列研究（１９６０．１．１￣１９７４．１２．３１）１３４７６人,追访至１９９４年底。其中接尘工１０３３１人,尘肺发病１１７９例,发病率０．４５％。１９６０年前进厂的接尘工尘肺发病率是０．６０％,１９５９年后进厂者为０．２４％,说明５０年代末期所推行的防尘措施有一定成效,但由于各厂降尘设备不完善,尘肺发病下降远不如金属钨矿和锡矿工人明显。本研究采用了定量分析,结果表明：①接尘工累积接总粉     

Biological indicators of exposure to total and respirable aluminium dust fractions in a primary aluminium smelter.

OBJECTIVES: The study attempts to define biological indicators of aluminium uptake and excretion in workers exposed to airborne aluminium compounds in a primary aluminium smelter. Also, this study defines the total and respirable aluminium dust fractions in two different potrooms, and correlates their concentrations with biological indicators in this group of workers. METHODS: Air was sampled at defined work sites. Non-destructive and conventional techniques were used to find total and respirable aluminium content of the dust. Blood and urine was collected from 84 volunteers employed at various work stations throughout the smelter and from two different cohorts of controls matched for sex, age, and socioeconomic status. Aluminium in serum samples and urine specimens was measured by flameless atomic absorption with a PE 4100 ZL spectrometer. RESULTS: The correlation of aluminium concentrations in serum and urine samples with the degree of exposure was assessed for three arbitrary exposure categories; low (0.036 mg Al/m3), medium (0.35 mg Al/m3) and high (1.47 mg Al/m3) as found in different areas of the smelter. At medium and high exposure, the ratio of respirable to total aluminium in the dust samples varied significantly. At high exposure, serum aluminium, although significantly raised, was still within the normal range of an unexposed population. The workers with low exposure excreted aluminium in urine at levels significantly higher than the controls, but still within the normal range of the population. However, potroom workers with medium and high exposure had significantly higher urinary aluminium than the normal range. CONCLUSIONS: It is concluded that only urinary aluminium constitutes a practical index of occupational exposure at or above 0.35 mg Al/m3, and that the respirable fraction of the dust may play a major role in the biological response to exposure to aluminium in a smelter environment.     

Risks of respiratory disease in the heavy clay industry

OBJECTIVES: Little information is available on the quantitative risks of respiratory disease from quartz in airborne dust in the heavy clay industry. Available evidence suggested that these risks might be low, possibly because of the presence in the dust of other minerals, such as illite and kaolinite, which may reduce the harmful effects of quartz. The aims of the present cross sectional study were to determine among workers in the industry (a) their current and cumulative exposures to respirable mixed dust and quartz; (b) the frequencies of chest radiographic abnormalities and respiratory symptoms; (c) the relations between cumulative exposure to respirable dust and quartz, and risks of radiographic abnormality and respiratory symptoms. METHODS: Factories were chosen where the type of process had changed as little as possible during recent decades. 18 were selected in England and Scotland, ranging in size from 35 to 582 employees, representing all the main types of raw material, end product, kilns, and processes in the manufacture of bricks, pipes, and tiles but excluding refractory products. Weights of respirable dust and quartz in more than 1400 personal dust samples, and site histories, were used to derive occupational groups characterised by their levels of exposure to dust and quartz. Full size chest radiographs, respiratory symptoms, smoking, and occupational history questionnaires were administered to current workers at each factory. Exposure-response relations were examined for radiographic abnormalities (dust and quartz) and respiratory symptoms (dust only). RESULTS: Respirable dust and quartz concentrations ranged from means of 0.4 and 0.04 mg.m-3 for non-process workers to 10.0 and 0.62 mg.m-3 for kiln demolition workers respectively. Although 97% of all quartz concentrations were below the maximum exposure limit of 0.4 mg.m-3, 10% were greater than this among the groups of workers exposed to most dust. Cumulative exposure calculations for dust and quartz took account of changes of occupational group, factory, and kiln type at study and non-study sites. Because of the importance of changes of kiln type additional weighting factors were applied to concentrations of dust and quartz during previous employment at factories that used certain types of kiln. 85% (1934 employees) of the identified workforce attended the medical surveys. The frequency of small opacities in the chest radiograph, category > or = 1/0, was 1.4% (median reading) and seven of these 25 men had category > or = 2/1. Chronic bronchitis was reported by 14.2% of the workforce and breathlessness, when walking with someone of their own age, by 4.4%. Risks of having category > or = 0/1 small opacities differed by site and were also influenced by age, smoking, and lifetime cumulative exposure to respirable dust and quartz. Although exposures to dust and to quartz were highly correlated, the evidence suggested that radiological abnormality was associated with quartz rather than dust. A doubling of cumulative quartz exposure increased the risk of having category > or = 0/1 by a factor of 1.33. Both chronic bronchitis and breathlessness were significantly related to dust exposure. CONCLUSIONS: Although most quartz concentrations at the time of this study were currently below regulatory limits in the heavy clay industry, high exposures regularly occurred in specific processes and occasionally among most occupational groups. However, there are small risks of pneumoconiosis and respiratory symptoms in the industry, although frequency of pneumoconiosis is low in comparison to other quartz exposed workers.     

Radiographic abnormalities in long-tenure Vermont granite workers and the permissible exposure limit for crystalline silica

This study was undertaken to assess the prevalence of radiographic abnormalities consistent with silicosis in a group of 600 retired granite workers who were receiving pensions. Files of regional clinics and hospitals were searched for chest radiographs taken on these men, and 470 x-ray films suitable for interpretation were located. After exclusions (women, and men who had worked in the granite industry elsewhere), 408 x-ray films were independently read by three experienced readers using the 1980 International Labour Office scheme. Dust exposures were estimated for workers hired after 1940, when the dust-control standard of 10 million particles per cubic foot (mppcf) (equivalent to 0.1 mg/m3) was put in place and monitored by the Vermont Division of Industrial Hygiene. Dust levels were initially high but were gradually reduced from 1940 to 1954, after which average quartz exposures stabilized to a mean of approximately 0.05 to 0.06 mg/m3; however, about 10% to 15% of samples after 1954 exceeded 0.1 mg/m3. Of the 408 x-ray films, 58 were taken on workers hired before dust controls were instituted in 1940, and 25.9% showed abnormalities (a profusion score of 1/0 or greater). A total of 350 x-ray films were taken on workers hired in 1940 or after, and the prevalence in this group was 5.7%. The radiographic changes in workers hired after 1940 are likely due to excessive exposures during the first 15 years of dust control. We conclude that if the exposure standard of 0.1 mg/m3 is rigorously observed in the workplace, radiographic abnormalities caused by quartz dust in long-term workers will be rare.     

Assessment of exposure to quartz, cristobalite and silicon carbide fibres (whiskers) in a silicon carbide plant

The main objective of the present paper is to report on the concentration of silicon carbide (SiC) fibres, crystalline silica and respirable dust in a Canadian SiC production plant and to compare the results with earlier investigations. The second objective is to tentatively explain the differences in concentration of the fibrogenic substances between different countries. The assessment of SiC fibres, dusts, respirable quartz and cristobalite was performed according to standard procedures. The highest 8 h time-weighted average concentrations of fibres were found among the crusher and backhoe attendants and the carboselectors with an arithmetic mean of 0.63 fibres ml(-1) for the former group and 0.51 fibres ml(-1) for the latter group. The results of respirable SiC fibres in the Canadian plant were lower than in the Norwegian and Italian industries. Most of the 8 h time-weighted average concentrations for quartz were less than or around the limit of detection of 0.01 mg m(-3). The maximum 8 h time-weighted average concentration for quartz was found among the carboselectors (0.157 mg m(-3)), followed by the labourers (0.032 mg m(-3)). Similarly, most of the 8 h time-weighted average cristobalite measurements were less than the limit of detection of 0.01 mg m(-3) except for the carboselectors where it was found to be 0.044 mg m(-3). The assessment of the Italian occupational settings exposure demonstrated elevated quartz concentrations, while cristobalite was absent. The authors have concluded that the investigations that were performed in the last two decades in this field by researchers from different countries seem to support that SiC fibres (whiskers) constitute a major airborne health hazard.     

瓷厂及钨矿生产性粉尘对血管内皮细胞的损伤效应

目的 评价瓷厂和钨矿生产性粉尘对血管内皮细胞的直接损伤作用,探讨粉尘引发心血管疾病的机制.方法 以人脐静脉内皮细胞(HUVEC)株HUV-EC-C为作用细胞,以瓷厂、钨矿作业点收集的生产性粉尘为实验粉尘,以中国标准石英为对照,将粉尘配制成25、50、100、200、400μg/ml浓度与HUVEC共培养24 h,测定细胞乳酸脱氢酶(LDH)活力、细胞的活力噻唑蓝(MTT)、一氧化氮(NO)和肿瘤坏死因子-α(TNF-α)的释放量.结果 瓷厂和钨矿作业点的生产性粉尘均能使HUVEC细胞培养液中LDH活力升高,释放NO及TNF-α水平升高,并随粉尘浓度升高呈现明确的剂量-反应关系.瓷厂和钨矿作业点生产性粉尘均能导致HUVEC细胞活力下降,呈剂量-反应关系.石英粉尘诱导HUVEC培养液中LDH活力升高的能力明显高于瓷厂和钨矿的生产性粉尘,差异有统计学意义(P＜0.05).瓷厂和钨矿生产性粉尘诱导HUVEC细胞活力下降及释放NO的能力相近且与标准石英相当.在较低剂量组(25、50、100μg/ml)时,瓷厂和钨矿生产性粉尘诱导TNF-α的释放量与标准石英相当,差异无统计学意义(P＞0.05),而在较高剂量组(200、400 μg/ml)时,标准石英诱导TNF-α的释放量明显高于瓷厂和钨矿生产性粉尘,差异有统计学意义(P＜0.05).结论 不同来源的生产性粉尘及标准石英均能损伤血管内皮细胞,诱导TNF-α释放,引起不同程度的生物学效应.     

Occupational exposure to chromium, copper and arsenic during work with impregnated wood in joinery shops.

CCA-impregnated timber contains copper, chromium and arsenic (CCA), and occupational exposure to wood dust as well as the CCA compounds may occur in work with such timber. Dust from commercially available impregnated wood has been found to contain hexavalent chromium, which is regarded as a carcinogen. Apart from determinations of the total amounts of the CCA compounds, specific determination of hexavalent chromium is therefore essential. Selective methods have been applied for control of the work environment in six joinery shops. The mean exposure to wood dust was found to be below 1 mg m-3. The mean airborne concentration of arsenic around various types of joinery machines was in the range from 0.54 to 3.1 micrograms m-3. No hexavalent chromium was detected in any samples and no increased concentrations of arsenic were found in urine from the workers. The presence of arsenic in the work-room air must be considered for appropriate assessment of the occupational environment in joinery shops.