Application of stability-indicating HPTLC method for quantitative determination of metadoxine in pharmaceutical dosage form

A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method for analysis of metadoxine both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of acetone-chloroform-methanol-ammonia (7.0:4.0:3.0:1.2, v/v/v/v). Densitometric analysis of metadoxine was carried out in the absorbance mode at 315 nm. This system was found to give compact spots for metadoxine (Rf value of 0.45+/-0.02, for six replicates). Metadoxine was subjected to acid, alkali and neutral hydrolysis, oxidation, dry and wet heat treatment and photo and UV degradation. The drug undergoes degradation under all stress conditions. Also, the degraded products were well resolved from the pure drug with significantly different Rf values. The method was validated for linearity, precision, robustness, LOD, LOQ, specificity and accuracy. Linearity was found to be in the range of 100-1500 ng/spot with significantly high value of correlation coefficient r2=0.9997+/-1.02. The linear regression analysis data for the calibration plots showed good linear relationship with r2=0.9999+/-0.58 in the working concentration range of 200-700 ng/spot. The mean value of slope and intercept were 0.11+/-0.04 and 18.73+/-1.89, respectively. The limits of detection and quantitation were 50 and 100 ng/spot, respectively. Statistical analysis proves that the method is repeatable and specific for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability-indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid and base degradation process. Arrhenius plot was constructed and activation energy was calculated respectively for acid and base degradation process.     

Stability-indicating HPTLC determination of imatinib mesylate in bulk drug and pharmaceutical dosage form

A simple, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of imatinib mesylate both as a bulk drug and in formulations was developed and validated. The method employed HPTLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of chloroform:methanol (6:4, v/v). The system was found to give compact spot for imatinib mesylate (R(f) value of 0.53+/-0.02). Densitometric analysis of imatinib mesylate was carried out in the absorbance mode at 276 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.9966+/-0.0013 with respect to peak area in the concentration range 100-1000 ng per spot. The mean value+/-S.D. of slope and intercept were 164.85+/-0.72 and 1168.3+/-8.26 with respect to peak area. The method was validated for precision, recovery and robustness. The limits of detection and quantitation were 10 and 30 ng per spot, respectively. Imatinib mesylate was subjected to acid and alkali hydrolysis, oxidation and thermal degradation. The drug undergoes degradation under acidic, basic, oxidation and heat conditions. This indicates that the drug is susceptible to acid, base hydrolysis, oxidation and heat. Statistical analysis proves that the method is repeatable, selective and accurate for the estimation of said drug. The proposed developed HPTLC method can be applied for identification and quantitative determination of imatinib mesylate in bulk drug and dosage forms.     

Stability-indicating HPTLC determination of curcumin in bulk drug and pharmaceutical formulations

A simple, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of curcumin both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60 F-254 as the stationary phase. The solvent system consisted of chloroform:methanol (9.25:0.75 v/v). This system was found to give compact spots for curcumin (R(f) value of 0.48 +/- 0.02). Densitometric analysis of curcumin was carried out in the absorbance mode at 430 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.996 and 0.994 with respect to peak height and peak area, respectively, in the concentration range 50-300 ng per spot. The mean value +/- S.D. of slope and intercept were 1.08 +/- 0.01, 51.93 +/- 0.54 and 8.39 +/- 0.21, 311.55 +/ -3.23 with respect to peak height and area, respectively. The method was validated for precision, recovery and robustness. The limits of detection and quantitation were 8 and 25 ng per spot, respectively. Curcumin was subjected to acid and alkali hydrolysis, oxidation and photodegradation. The drug undergoes degradation under acidic, basic, light and oxidation conditions. This indicates that the drug is susceptible to acid, base hydrolysis, oxidation and photo oxidation. Statistical analysis proves that the method is repeatable, selective and accurate for the estimation of said drug. As the method could effectively separate the drug from its degradation product, it can be employed as a stability-indicating one.     

HPTLC method for guggulsterone. I. Quantitative determination of E- and Z-guggulsterone in herbal extract and pharmaceutical dosage form

A sensitive, selective, precise and robust high-performance thin-layer chromatographic method of analysis of E and Z stereoisomers of guggulsterone (the hypolipidemic agent in the gum-resin exudates of Commiphora mukul) both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone (9:1, v/v). Densitometric analysis of guggulsterone was carried out in the absorbance mode at 250 nm. This system was found to give compact spots for E- and Z-guggulsterone (Rf value of 0.38 +/- 0.02 and 0.46 +/- 0.02, respectively) following double development of chromatoplates with the same mobile phase. The linear regression analysis data for the calibration plots for E- and Z-guggulsterone showed good linear relationship with r2 = 0.9977 +/- 0.054 and 0.9975 +/- 0.068, respectively, in the concentration range of 100-6000 ng/spot. The mean value of slope and intercept were 0.11 +/- 0.006 and 0.11 +/- 0.005, 14.26 +/- 0.56 and 10.92 +/- 0.76, respectively, for E- and Z-guggulsterone. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 12, 10 and 24, 20 ng/spot, respectively, for E- and Z-guggulsterone. Statistical analysis proves that the method is repeatable and selective for the estimation of the said drug. Since the proposed mobile phase effectively resolves the E- and Z-isomers of guggulsterone, this HPTLC method can be applied for identification and quantitation of these isomers in herbal extracts and pharmaceutical dosage form.     

Stability indicating HPTLC determination of piroxicam

A rapid and sensitive HPTLC method was developed and validated for the estimation of Piroxicam (PM). Spectrodensitometric scanning-integration was performed at an absorbance wavelength of 360 nm. To justify the suitability, accuracy and precision of the proposed method, recovery studies were performed at three concentration levels. One of the degradation products of PM is 2-aminopyridine (2AP). It becomes imperative to separate this compound as it is a precursor during synthesis of the drug. A TLC aluminium plate precoated with silica gel 60F-254 was used as the stationary phase. The solvent system toluene-acetic acid (8:2 v/v) gave a dense and compact spot of PM with a Rf value of 0.58 +/- 0.01 which was well separated from 2AP (Rf 0.23 +/- 0.01). The polynomial regression data for the calibration plots exhibited good linear relationship (coefficient of correlation r = 0.9982) over a concentration range of 400-800 ng. Statistical analysis proves that the proposed method is accurate and reproducible. The method is stability indicating and being economical can be employed for the routine analysis in bulk drug as well as pharmaceutical formulations.     

Quantitative Determination of L-DOPA in Seeds of Mucuna Pruriens Germplasm by High Performance Thin Layer Chromatography

Mucuna pruriens Linn. is an important medicinal plant used for treatment of Parkinson's disease and many others in ancient Indian medical system. L-DOPA extracted from seeds of Mucuna is a constituent of more than 200 indigenous drug formulations and is more effective as drug than the synthetic counterpart. A densitometric high performance thin-layer chromatographic (HPTLC) method was developed for quantification of L-DOPA content present in the seeds extract. The method involves separation of L-DOPA on precoated silica gel 60 GF(254) HPTLC plates using a solvent system of n-butanol-acetic-acid-water (4:1:1, v/v) as the mobile phase. Quantification was done at 280 nm using absorbance reflectance mode. Linearity was found in the concentration range of 100 to 1000 ng/spot with the correlation coefficient value of 0.9980. The method was validated for accuracy, precision and repeatability. Mean recovery was 100.89%. The LOD and LOQ for L-DOPA determination were found to be 3.41 ng/spot and 10.35 ng/spot respectively. The proposed HPTLC method was found to be precise, specific and accurate for quantitative determination of L-DOPA. It can be used for rapid screening of large germplasm collections of Mucuna pruriens for L-DOPA content. The method was used to study variation in fifteen accessions of Mucuna germplasm collected from different geographical regions.     

Stability-indicating HPTLC determination of tizanidine hydrochloride in bulk drug and pharmaceutical formulations

A simple, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of tizanidine hydrochloride both as a bulk drug and in formulations was developed and validated. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone-ammonia (5:5:0.1, v/v/v). This system was found to give compact spots for tizanidine hydrochloride (R(f) value of 0.32+/-0.01). Tizanidine hydrochloride was subjected to acid and alkali hydrolysis, oxidation and photodegradation. Also, the degraded product was well separated from the pure drug. Densitometric analysis of tizanidine hydrochloride was carried out in the absorbance mode at 315 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.9922 in the concentration range 300-1000 ng per spot. The mean value of correlation coefficient, slope and intercept were 0.9922+/-0.002, 0.064+/-0.001 and 38.09+/-1.71, respectively. The method was validated for precision, recovery and robustness. The limits of detection and quantitation were 88 and 265 ng per spot, respectively. The drug does not undergo degradation under acidic and basic conditions. The samples degraded with hydrogen peroxide showed additional peak at R(f) value of 0.12. This indicates that the drug is susceptible to oxidation. Statistical analysis proves that the method is repeatable and selective for the estimation of said drug. As the method could effectively separate the drug from its degradation product, it can be employed as a stability-indicating one.     

Simultaneous HPTLC Determination of Rabeprazole and Itopride Hydrochloride From Their Combined Dosage Form

A simple, precise, sensitive, rapid and reproducible HPTLC method for the simultaneous estimation of the rabeprazole and itopride hydrochloride in tablets was developed and validated. This method involves separation of the components by TLC on precoated silica gel G60F254 plate with solvent system of n-butanol, toluene and ammonia (8.5:0.5:1 v/v/v) and detection was carried out densitometrically using a UV detector at 288 nm in absorbance mode. This system was found to give compact spots for rabeprazole (Rf value of 0.23 0.02) and for itopride hydrochloride (Rf value of 0.75±0.02). Linearity was found to be in the range of 40-200 ng/spot and 300-1500 ng/spot for rabeprazole and itopride hydrochloride. The limit of detection and limit of quantification for rabeprazole were 10 and 20 ng/spot and for itopride hydrochloride were 50 and 100 ng/spot, respectively. The method was found to be beneficial for the routine analysis of combined dosage form.     

Central composite design expert-supported development and validation of HPTLC method: Relevance in quantitative evaluation of protopine in Fumaria indica

The current study was executed for method development, validation and to estimate the concentration of protopine in methanolic extract of Fumaria indica by high-performance thin-layer chromatography (HPTLC). Isolation of bioactive compounds was carried out using the mobile phase, toluene:ethyl acetate:diethyl amine (8:2.5:0.5 v/v/v), and detected at wavelength 290 nm. This method was validated for precision, specificity, linearity, limit of detection (LOD), limit of quantification (LOQ), etc. The calibration range was found to be 500–5000 ng/spot for the bioactive compound. Protopine was separated with an R_f value of 0.22 ± 0.03. The method was validated for linearity (r2 ≥ 0.996 ± 0.082), accuracy 98.75–102.12%), and RSD of precision (0.49–2.07) with a calibration curve range of 500.00–5000.00 ng/spot. The LOD and LOQ were found to be 83.92 ng/spot and 254.30 ng/spot., respectively. The Central Composite design expert was applied for the validation of robustness. Three independent variables such as the volume of toluene in solvent system, chamber saturation time and wavelength were investigated. The results indicated that a slight change in these variables had no significant effect on the peak response. This developed HPTLC method is simple, precise, robust, specific, rapid, and cost effective. It could be used for quality control study and quantification of protopine in the plant extract and different herbal formulations containing the plant species.     

Quantitative determination of anti-tumor agent bis(4-fluorobenzyl)trisulfide, fluorapacin and its pharmaceutical preparation by high-performance liquid chromatography

A simple isocratic and stability-indicating HPLC method was developed and validated for the quantitative determination of anti-tumor agent fluorapacin and its pharmaceutical preparation. A Spherisorb ODS II C(18) (250 mm x 4.6 mm, 5 microm) column was eluted with a mobile phase consisting of acetonitrile/water (85:15, v/v). The analyses were performed at 40+/-1 degrees C with a flow rate of 1.0 mL/min and UV detection at 218 nm. The calibration curve was linear over a concentration range of 160-240 microg/mL with the correlation coefficient of 0.9997. The LOD and LOQ were determined to be 1.4 and 7.0 ng/mL, respectively. Average recoveries were 98.27% and 100.40% for fluorapacin API and its drug product with corresponding relative standard deviations (R.S.D.) of 0.41% and 0.30%, respectively. Good repeatability (precision and intermediate precision), accuracy and tolerability were obtained with R.S.D. of <1.0%. This specific and reliable method has been successfully applied for quality control of fluorapacin API and drug product.     

HPTLC method for guggulsterone. II. Stress degradation studies on guggulsterone

Stress degradation studies were carried out on guggulsterone (the hypolipidemic agent in the gum-resin exudates of Commiphora mukul) following the conditions prescribed in the parent drug stability testing guideline (Q1AR) issued by International Conference on Harmonization (ICH). The present study describes degradation of guggulsterone under different ICH prescribed stress conditions (acid and base hydrolysis, oxidation, dry and wet heat degradation and photodegradation) and establishment of a stability indicating HPTLC assay. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-acetone (9:1, v/v). Densitometric analysis of guggulsterone was carried out in the absorbance mode at 250 nm. This system was found to give compact spots for E- and Z-guggulsterone, (Rf value of 0.38 +/- 0.02 and 0.46 +/- 0.02, respectively) following double development of chromatoplates with the same mobile phase. The drug undergoes degradation under acidic and basic conditions, oxidation, dry and wet heat treatment and photodegradation. All the peaks of degraded products were resolved from the standard guggulsterone with significantly different Rf values. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.     

Validated HPTLC method of analysis for artemether and its formulations

A simple, sensitive, precise and rapid high-performance thin-layer chromatographic (HPTLC) method of analysis for artemether both as a bulk drug and in pharmaceutical formulations was developed and validated. The method employed TLC aluminum plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of toluene-ethyl acetate-formic acid (8:2:0.3, v/v/v) as mobile phase. Densitometric analysis of artemether was carried out in the reflectance mode at 565 nm. The system was found to give compact spots for artemether (R(f) value of 0.50+/-0.03). The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.9904 in the concentration range 200-1000 ng per spot. The mean value of correlation coefficient, slope and intercept were 0.9904+/-0.011, 7.27+/-0.11 and 166.24+/-56.92, respectively. The method was validated for precision, accuracy, recovery and robustness. The limits of detection and quantitation were 65.91 and 197.74 ng per spot, respectively. The method has been successfully applied in the analysis of lipid based parenteral formulations and marketed oral solid dosage formulation.     

Validated stability-indicating methods for determination of cilostazol in the presence of its degradation products according to the ICH guidelines

Sensitive and selective stability-indicating assay methods (SIAMs) are suggested for the determination of cilostazol (CIL) in the presence of its acid, alkaline and oxidative degradation products. Developing SIAMs is necessary to carry out any stability study. Stress testing of CIL was performed according to the International Conference on Harmonization (ICH) guidelines in order to validate the stability-indicating power of the analytical procedures. Stress testing showed that CIL underwent acid, alkaline and oxidative degradation; on the other hand, it showed stability towards photo- and thermal degradation. Two chromatographic SIAMs were developed, namely HPLC and HPTLC methods. The concentration range and the mean percentage recovery were 1.0-31.0 microg/ml and 99.96+/-0.46 and 0.6-14.0 microg/spot and 99.88+/-1.10 for HPLC and HPTLC methods, respectively. In addition, derivative spectrophotometric methods were developed in order to determine CIL in the presence of its acid degradation product; these were performed by using the third derivative spectra (3D) and the first derivative of the ratio spectra (1DD) methods. The linearity range and the mean percentage recovery were 2.0-34.0 microg/ml and 100.27+/-1.20 for the (3D) method, while they were 2.0-30.0 microg/ml and 99.94+/-1.18 for the (1DD) method. Also, two chemometric-assisted spectrophotometric methods, based on using partial least squares (PLS) and concentration residual augmented classical least squares method (CRACLS), for the determination of CIL were developed. Both methods were applied on zero order spectra of the mixtures of CIL and its acid degradation product, the mean percentage recovery was 100.03+/-1.09 and 99.91+/-1.27 for PLS and CRACLS, respectively. All methods were validated according to the International Conference on Harmonization (ICH) guidelines and applied on bulk powder and pharmaceutical formulations.     

A Validated Stability-Indicating RP-UPLC Method for Simultaneous Determination of Desloratadine and Sodium Benzoate in Oral Liquid Pharmaceutical Formulations

A novel, sensitive and selective stability-indicating gradient reverse phase ultra performance liquid chromatographic method was developed and validated for the quantitative determination of desloratadine and sodium benzoate in pharmaceutical oral liquid formulation. The chromatographic separation was achieved on Acquity BEH C8 (100 mm × 2.1 mm) 1.7 μm column by using mobile phase containing a gradient mixture of solvent A (0.05 M KH(2)PO(4) and 0.07 M triethylamine, pH 3.0) and B (50:25:25 v/v/v mixture of acetonitrile, methanol and water) at flow rate of 0.4 mL/min. Column temperature was maintained at 40°C and detection was carried out at a wavelength of 272 nm. The described method shows excellent linearity over a range of 0.254 μg/mL to 76.194 μg/mL for desloratadine and 1.006 μg/mL to 301.67 μg/mL for sodium benzoate. The correlation coefficient for desloratadine and sodium benzoate was more than 0.999. To establish stability-indicating capability of the method, drug product was subjected to the stress conditions of acid, base, oxidative, hydrolytic, thermal and photolytic degradation. The degradation products were well resolved from desloratadine and sodium benzoate. The developed method was validated as per international ICH guidelines with respect to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.     

Development and validation of a HPTLC method for Estimation of Duloxetine Hydrochloride in Bulk Drug and in Tablet Dosage Form

Duloxetine hydrochloride is a potent dual reuptake inhibitor of serotonin and norepinephrine used to treat major depressive disorders. The present work describes a simple, precise and accurate HPTLC method for its estimation as bulk and in tablet dosage form. The chromatographic separation was carried out on precoated silica gel 60 F254 aluminium plates using mixture of chloroform:methanol (8:1 v/v) as mobile phase and densitometric evaluation of spots was carried out at 235 nm using Camag TLC Scanner-3 with win CAT 1.3.4 version software. The experimental parameters like band size of the spot applied, chamber saturation time, solvent front migration, slit width etc. were critically studied and optimum conditions were evolved. The drug was satisfactorily resolved with Rf value 0.11±0.01. The accuracy and reliability of the proposed method was ascertained by evaluating various validation parameters like linearity (40-200 ng/spot), precision (intra-day RSD 0.46-0.75%, inter-day RSD 0.46-1.59%), accuracy (98.72±0.20) and specificity according to ICH guidelines. The proposed method can analyse ten or more formulation units simultaneously on a single plate and provides a faster and cost-effective quality control tool for routine analysis of duloxetine hydrochloride as bulk drug and in tablet formulation.     

Stability indicating HPTLC method for the estimation of estradiol

Estradiol (ESD) is widely used in post climacteric replacement therapy. Most of the methods used for quantitation are expensive and time consuming. A rapid, selective and precise stability indicating high performance thin layer chromatography method was developed and validated for the estimation of ESD in bulk and pharmaceutical dosage forms. The method employed TLC aluminium plate precoated with silica gel 60F254 as the stationary phase. The solvent system employed consisted of chloroform-acetone-isopropyl alcohol-glacial acetic acid (9:1:0.4:0.1, v/v/v/v). Such a complex system was essential to obtain a dense and compact spot of the drug at an Rf value of 0.40 +/- 0.02. The drug on intentional degradation gave two products with Rf values of 0.52 +/- 0.01 and 0.58 +/- 0.01 respectively. Spectrodensitometric scanning-integration was performed on a Camag system using a wavelength of 286 nm. The polynomial regression data for the calibration plots exhibited good linear relationship (r = 0.9947) over a concentration range of 1-8 microg. Recovery studies were also performed at three experimental levels. The recovery data reveals that the RSD for intra-day and inter-day analysis was found to be 1.27% and 1.75%, respectively. The proposed method was found to be stability indicating. Statistical analysis proves that the method is precise, accurate and reproducible, hence can be employed for the routine analysis of the drug.     

HPTLC method for simultaneous determination of ascorbic acid and gallic acid biomarker from freeze dry pomegranate juice and herbal formulation

A new rapid, simple, sensitive and high performance thin layer chromatography (HPTLC) has been established for the simultaneous determination of ascorbic acid and gallic acid in the freeze-dried pomegranate fruit juice and herbal formulation. HPTLC method was carried out using ethyl acetate: acetone: water: formic acid, 10:6:2:2 (%, v/v/v/v)) on 20 × 10 cm glass coated silica gel 60 F₂₅₄ plates and scanned at 254 nm for ascorbic acid and gallic acid. Ascorbic acid and gallic acid in the freeze-dried pomegranate fruit juice were identified by comparing their single spot at R_f = 0.54 ± 0.02 and R_f = 0.83 ± 0.01 respectively. The value of regression equation (r² ≥ 0.9992) revealed a good linear relationship between peak area and amount of ascorbic acid and gallic acid in the range of 100–800 ng/band. The method was validated for precision, accuracy, robustness LOD and LOQ. The method proposed can be useful for routine determination of ascorbic acid and gallic acid in various crude as well as herbal formulations as a quality control tool.     

High-Performance Liquid Chromatographic and High-Performance Thin-Layer Chromatographic Method for the Quantitative Estimation of Dolutegravir Sodium in Bulk Drug and Pharmaceutical Dosage Form

Simple, sensitive, precise, and specific high-performance liquid chromategraphic (HPLC) and high-performance thin-layer chromatographic (HPTLC) methods for the determination of dolutegravir sodium in bulk drug and pharmaceutical dosage form were developed and validated. In the HPLC method, analysis of the drug was carried out on the ODS C₁₈ column (150 × 4.6 mm, 5 μm particle size) using a mixture of acetonitrile: water (pH 7.5) in the ratio of 80:20 v/v as the mobile phase at the flow rate 1 mL/min at 260 nm. This method was found to be linear in the concentration range of 5–35 μg/mL. The peak for dolutegravir sodium was observed at 3.0 ± 0.1 minutes. In the HPTLC method, analysis was performed on aluminum-backed plates pre-coated with silica gel G60 F₂₅₄ using methanol: chloroform: formic acid in the proportion of 8:2:0.5 v/v/v as the mobile phase. This solvent system was found to give compact spots for dolutegravir sodium with the Rf value 0.77 ± 0.01. Densitometric analysis of dolutegravir sodium was carried out in the absorbance mode at 265 nm. Linear regression analysis showed good linearity with respect to peak area in the concentration range of 200–900 ng/spot. The methods were validated for precision, limit of detection (LOD), limit of quantitation (LOQ), accuracy, and specificity. Statistical analysis showed that both of the methods are repeatable and specific for the estimation of the said drug. The methods can be used for routine quality control analysis of dolutegravir sodium.     

Stability-indicating HPTLC method for simultaneous determination of nateglinide and metformin hydrochloride in pharmaceutical dosage form

A stability indicating high performance thin layer chromatography (HPTLC) method was developed and validated for determination of two anti-diabetic drugs, nateglinide and metformin hydrochloride in co-formulations. Study was performed on pre-coated silica gel HPTLC plates using chloroform:ethyl acetate:acetic acid (4:6:0.1 v/v/v) as the mobile phase. A TLC scanner set at 216 nm was used for direct evaluation of the chromatograms in the reflectance/absorbance mode. Method was validated according to ICH guidelines. The correlation coefficients of calibration curves were found to be 0.996 and 0.995 in the concentration range of 200–2400 and 500–3000 ng band⁻¹ for nateglinide and metformin, respectively. The method had an accuracy of 99.72% for nateglinide and 100.08% for metformin hydrochloride. The method had the potential to determine these drugs simultaneously from dosage forms without any interference of the tablets excipients. Nateglinide and metformin hydrochloride were also subjected to acid, base, oxidation, wet, heat and photo-degradation studies. The degradation products obtained were well resolved from the pure drugs with significantly different R_f values. As the method could effectively separate the drugs from its degradation products, it can be used for stability-indicating analysis.     

Stability-indicating Simultaneous HPTLC Method for Olanzapine and Fluoxetine in Combined Tablet Dosage Form

A rapid, selective and stability-indicating high performance thin layer chromatographic method was developed and validated for the simultaneous estimation of olanzapine and fluoxetine in combined tablet dosage form. Olanzapine and fluoxetine were chromatographed on silica gel 60 F₂₅₄ TLC plate using methanol:toluene (4:2 v/v) as the mobile phase and spectrodensitometric scanning-integration was performed at a wavelength of 233 nm using a Camag TLC Scanner III. This system was found to give compact spots for both olanzapine (R_f value of 0.63±0.01) and fluoxetine (R_f value of 0.31±0.01). The polynomial regression data for the calibration plots showed good linear relationship with r²=0.9995 in the concentration range of 100-800 ng/spot for olanzapine and 1000-8000 ng/spot for fluoxetine with r²=0.9991. The method was validated in terms of linearity, accuracy, precision, recovery and specificity. The limit of detection and the limit of quantification for the olanzapine were found to be 30 and 100 ng/spot, respectively and for fluoxetine 300 and 1000 ng/spot, respectively. Olanzapine and fluoxetine were degraded under acidic, basic and oxidation degradation conditions which showed all the peaks of degraded product were well resolved from the active pharmaceutical ingredient. Both drugs were not further degraded after thermal and photochemical degradation. The method was found to be reproducible and selective for the simultaneous estimation of olanzapine and fluoxetine. As the method could effectively separate the drugs from their degradation products, it can be employed as a stability-indicating method.