Development and Validation of HPTLC Method for the Estimation of Almotriptan Malate in Tablet Dosage Form

A new, simple, precise and accurate high performance thin layer chromatographic method has been proposed for the determination of almotriptan malate in a tablet dosage form. The drug was separated on aluminum plates precoated with silica gel 60 GF(254) with butanol:acetic acid:water (3:1:1) was used as mobilephase. Quantitative analysis was performed by densitometric scanning at 300 nm. The method was validated for linearity, accuracy, precision and robustness. The calibration plot was linear over the range of 100-700 ng/band for almotriptan malate. The method was successfully applied to the analysis of drug in a pharmaceutical dosage form.     

Development and Validation of RP-HPLC Method for the Determination of Methamphetamine and Propranolol in Tablet Dosage Form

A new isocratic reversed-phase HPLC method with diode-array UV detection was developed and validated for the determination of methamphetamine and propranolol in tablet dosage forms. Chromatography was carried out on an XTerra RP18 (150×4.6 mm, 5 μm) column using 50 mM pyrrolidine (pH 11.5) - acetonitrile (50:50, v/v) as mobile phase at a flow rate of 1 ml/min. Spectrophotometric detection was performed at a wavelength of 214 nm. The linearity was established over the concentration range of 0.075-0.60 mg/ml for both drugs. The correlation coefficients (r(2)) were ≥0.9998 in each case. The relative standard deviation values for intermediate precision studies were <1%. Statistical analysis of the data showed that the method was precise, accurate, reproducible and selective for the analysis of methamphetamine and propranolol drugs. The method was successfully employed for the determination of propranolol and methamphetamine in commercially available tablet dosage form.     

Development and Validation of a Stability-Indicating RP-HPLC Method for the Assay of Pristinamycin in Bulk and Tablet Dosage Form

Pristinamycin is an antibiotic used mainly in the treatment of Staphylococcus infections. The aim of this study was to develop a rapid and simple stability-indicating RP-HPLC method for the determination of pristinamycin in tablet dosage form. Pristinamycin was eluted on the ACE-5, C₁₈-HL, 250 x 4.6 mm, 5 µm analytical column with a mobile phase consisting of 0.2% orthophosphoric acid and acetonitrile 63:37 v/v, pumped at 1.5 ml/min flow rate. The column was maintained at 40°C and 10 μl of the solutions were injected. UV detection was performed at 206 nm. The procedure separated pristinamycin and its potential degradation products in an overall analysis time of less than 10 min with pristinamycin eluting at about 3 min. The method was validated according to the regulatory guidelines with respect to specificity, precision, accuracy, linearity, and robustness. Forced degradation studies were also performed for pristinamycin bulk drug samples to demonstrate the stability-indicating power of the HPLC method. The % RSD of system precision and method precision was found to be 0.64 and 1.49%, respectively. The procedure provided a linear response over the concentration range 25–150 μg/ml (r = 0.9998). Finally, the applicability of the method was evaluated in the tablet dosage form as well as in stability samples.     

Development and Validation of RP-HPLC Method for the Simultaneous Estimation of Montelukast Sodium and Ebastine in Tablet Dosage Form

A rapid and sensitive RP-HPLC method with UV detection (244 nm) for routine analysis of montelukast sodium and ebastine in a pharmaceutical formulation (Ebast-M) was developed. Chromatography was performed with mobile phase containing a mixture of methanol:acetonitrile:ammonium acetate (80:10:10, % v/v/v), pH of mobile phase was adjusted 5.5 using glacial acetic acid and flow rate was 1.2 ml/min. The method was validated for linearity, accuracy, robustness and intermediate precision. The linearity was established over the concentration range of 0.01−0.06 mg/ml for both drugs. The correlation coefficients (r²) for ebastine and montelukast were 0.9989 and 0.9955, respectively. Statistical analysis of the data showed that the method was precise, accurate, reproducible and selective for the analysis of ebastine and montelukast drugs. The method was successfully employed for the determination of ebastine and montelukast in commercially available tablet dosage form.     

Development of a Stability-Indicating Stereoselective Method for Quantification of the Enantiomer in the Drug Substance and Pharmaceutical Dosage Form of Rosuvastatin Calcium by an Enhanced Approach

A novel, simple, precise, and stability-indicating stereoselective method was developed and validated for the accurate quantification of the enantiomer in the drug substance and pharmaceutical dosage forms of Rosuvastatin Calcium. The method is capable of quantifying the enantiomer in the presence of other related substances. The chromatographic separation was achieved with an immobilized cellulose stationary phase (Chiralpak IB) 250 mm x 4.6 mm x 5.0 μm particle size column with a mobile phase containing a mixture of n-hexane, dichloromethane, 2-propanol, and trifluoroacetic acid in the ratio 82:10:8:0.2 (v/v/v/v). The eluted compounds were monitored at 243 nm and the run time was 18 min. Multivariate analysis and statistical tools were used to develop this highly robust method in a short span of time. The stability-indicating power of the method was established by subjecting Rosuvastatin Calcium to the stress conditions (forced degradation) of acid, base, oxidative, thermal, humidity, and photolytic degradation. Major degradation products were identified and found to be well-resolved from the enantiomer peak, proving the stability-indicating power of the method. The developed method was validated as per International Conference on Harmonization (ICH) guidelines with respect to specificity, limit of detection and limit of quantification, precision, linearity, accuracy, and robustness. The method exhibited consistent, high-quality recoveries (100 ± 10%) with a high precision for the enantiomer. Linear regression analysis revealed an excellent correlation between the peak responses and concentrations (r² value of 0.9977) for the enantiomer. The method is sensitive enough to quantify the enantiomer above 0.04% and detect the enantiomer above 0.015% in Rosuvastatin Calcium. The stability tests were also performed on the drug substances as per ICH norms.     

Development and Validation of a Stability-Indicating Capillary Electrophoresis Method for the Determination of Zolpidem Tartrate in Tablet Dosage Form with Positive Confirmation using 2D- and 3D-DAD Fingerprints

The aim of the current study was to develop a simple, precise, and accurate capillary zone electrophoresis method for the determination of zolpidem tartrate in tablet dosage form. Separation was conducted in normal polarity mode at 25°C, 22 kV, using hydrodynamic injection for 10 s. Separation was achieved using a background electrolyte of 20 mM disodium hydrogen phosphate adjusted with phosphoric acid (85%), pH at 5.50, and detection at 254 nm. Using the above optimized conditions, complete determination took place in less than 3 min using amiloride HCl as the internal standard. The method was linear over the range of 3–1000 μg mL⁻¹ with a correlation coefficient of 0.9999. Forced degradation studies were conducted by introducing a sample of zolpidem tartrate standard and pharmaceutical sample solutions to different forced degradation conditions, being neutral (water), basic (0.1 M NaOH), acidic (0.1 M HCl), oxidative (10% H₂O₂), temperature (60°C in oven for 3 days), and photolytic (exposure to UV light at 254 nm for 2 h). Degradation products resulting from the stress studies did not interfere with the detection of zolpidem tartrate and the assay can be considered stability-indicating.