Synthesis of N‐(3‐[18F]Fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([18F]FP‐β‐CIT)

N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐iodophenyl)nortropane ([¹⁸F]FP‐β‐CIT) was synthesized in a two‐step reaction sequence. In the first reaction, 1‐bromo‐3‐(nitrobenzene‐4‐sulfonyloxy)‐propane was fluorinated with no‐carrier‐added fluorine‐18. The resulting product, 1‐bromo‐3‐[¹⁸F]‐fluoropropane, was distilled into a cooled reaction vessel containing 2β‐carbomethoxy‐3β‐(4‐iodophenyl)‐nortropane, diisopropylethylamine and potassium iodide. After 30 min, the reaction mixture was subjected to a preparative HPLC purification. The product, [¹⁸F]FP‐β‐CIT, was isolated from the HPLC eluent with solid‐phase extraction and formulated to yield an isotonic, pyrogen‐free and sterile solution of [¹⁸F]FP‐β‐CIT. The overall decay‐corrected radiochemical yield was 25 ± 5%. Radiochemical purity was > 98% and the specific activity was 94 ± 50 GBq/µmol at the end of synthesis. Copyright © 2006 John Wiley & Sons, Ltd.     

Automated synthesis and purification of [18F]fluoro‐[di‐deutero]methyl tosylate

Automated synthetic procedures of [¹⁸F]fluoro‐[di‐deutero]methyl tosylate on a GE TRACERlab FX F‐N module and a non‐commercial synthesis module have been developed. The syntheses included azeotropic drying of the [¹⁸F]fluoride, nucleophilic ¹⁸F‐fluorination of bis(tosyloxy)‐[di‐deutero]methane, HPLC purification and subsequent formulation of the synthesized [¹⁸F]fluoro‐[di‐deutero]methyl tosylate (d₂‐[¹⁸F]FMT) in organic solvents. Automation shortened the total synthesis time to 50 min, resulting in an average radiochemical yield of about 50% and high radiochemical purity (>98%). The possible application of this procedure to commercially available synthesis modules might be of significance for the production of deuterated ¹⁸F‐fluoromethylated imaging probes in the future. Copyright © 2013 John Wiley & Sons, Ltd.     

Efficient O‐ and N‐(β‐fluoroethylation)s with NCA [18F]β‐fluoroethyl tosylate under microwave‐enhanced conditions

Reactions of no‐carrier‐added (NCA) [¹⁸F]β‐fluoroethyl tosylate with amine, phenol or carboxylic acid to form the corresponding [¹⁸F]N‐(β‐fluoroethyl)amine, [¹⁸F]β‐fluoroethyl ether or [¹⁸F]β‐fluoroethyl ester, were found to be rapid (2–10 min) and efficient (51–89% conversion) under microwave‐enhanced conditions. These conditions allow reactants to be heated rapidly to 150°C in a low boiling point solvent, such as acetonitrile, and avoid the need to use high boiling point solvents, such as DMSO and DMF, to promote reaction. The microwave‐enhanced reactions gave about 20% greater radiochemical yields than thermal reactions performed at similar temperatures and over similar reaction times. With a bi‐functional molecule, such as DL‐pipecolinic acid, [¹⁸F]β‐fluoroethyl tosylate reacts exclusively with the amino group. Copyright © 2004 John Wiley & Sons, Ltd.     

Improved synthesis of [18F]fluoromethyl tosylate,a convenient reagent for radiofluoromethylations

The utility of [¹⁸F]fluoromethyl tosylate as an [¹⁸F]fluoromethylation reagent has been reexamined. The preparation of this potentially useful compound from the reaction of bis(tosyloxy) methane with ¹⁸F‐ was reported several years ago, but it had not found use as a labeling reagent. When the reported reaction of bis(tosyloxy) methane with ¹⁸F‐ was carried out, [¹⁸F]fluoromethyl tosylate was formed along with [¹⁸F]tosyl fluoride. The product ratio depended upon reaction conditions, with the yield of [¹⁸F]fluoromethyl tosylate usually in the range of 25–40%. Addition of a small amount of water to the reaction mixture resulted in a significant increase in the yield of [¹⁸F]fluoromethyl tosylate. Reaction conditions were defined that produced a yield of 71±6% of [¹⁸F]fluoromethyl tosylate (decay corrected). The product was conveniently purified by alumina chromatography. Reaction of [¹⁸F]fluoromethyl tosylate with the (des‐fluoromethyl) fluticasone propionate thioacid precursor produced [¹⁸F]fluticasone propionate in improved yield (16%, from fluoride in production‐scale runs) over other synthesis methods. Similarly, formation of [¹⁸F]choline, [¹⁸F]fluoromethionine and N‐([¹⁸F]fluoromethyl)spiperone from the reaction of [¹⁸F]fluoromethyl tosylate with corresponding precursors was examined. Copyright © 2005 John Wiley & Sons, Ltd.     

4‐[18F]fluorophenyl ureas via carbamate‐4‐nitrophenyl esters and 4‐[18F]fluoroaniline

Four different no carrier added (n.c.a.) 4‐[¹⁸F]fluorophenylurea derivatives are synthesized as model compounds via two alternative routes. In both cases carbamate‐4‐nitrophenylesters are used as intermediates. Either n.c.a. 4‐[¹⁸F]fluoroaniline reacts with carbamates of several amines, or the carbamate of n.c.a. 4‐[¹⁸F]fluoroaniline is formed at first and an amine is added subsequently to yield the urea derivative. The choice of the appropriate way of reaction depends on the possibilities of precursor synthesis. The radiochemical yields reach up to 80% after 50 min of synthesis time while no radiochemical by‐products can be determined. These high yields were possible due to an optimized preparation of n.c.a. 4‐[¹⁸F]fluoroaniline with a radiochemical yield of up to 90%. From the various ways of its radiosynthesis, the substitution with n.c.a. [¹⁸F]fluoride on dinitrobenzene is chosen, using phosphorous acid and palladium black for reduction of the second nitro group. Copyright © 2006 John Wiley & Sons, Ltd.     

Radiosynthesis of 1‐(4‐(2‐[18F]fluoroethoxy)benzenesulfonyl)‐3‐butyl urea: a potential β‐cell imaging agent

Tolbutamide ( 1 ) is a sulfonurea agent used to stimulate insulin secretion in type 2 diabetic patients. Its analogue 1‐(4‐(2‐[¹⁸F]fluoroethoxy)benzenesulfonyl)‐3‐butyl urea ( 3 ) was synthesized in overall radiochemical yields of 45% as a potential β‐cell imaging agent. Compound 3 was synthesized by ¹⁸F‐fluoroalkylation of the corresponding hydroxy precursor ( 2 ) with 2‐[¹⁸F]fluoroethyltosylate in DMF at 120°C for 10 min followed by purification with HPLC in a synthesis time of 50 min. Insulin secretion experiments of the authentic ¹⁹F‐standard compound on rat islets showed that the compound has a similar stimulating effect on insulin secretion as that of tolbutamide ( 1 ). The partition coefficient of compound 3 between octanol/water was determined to be 1.3±0.3 (n=5). Copyright © 2002 John Wiley & Sons, Ltd.     

Simplified and automatic one‐pot synthesis of 16α‐[18F]fluoroestradiol without high‐performance liquid chromatography purification

16α‐[¹⁸F]Fluoroestradiol (16α‐[¹⁸F]FES, 1) is known as a valuable tracer in molecular imaging as estrogen receptor (ER) ligand for investigation of primary and metastatic breast cancer. ER concentration in human breast tumor cells is a significant indicator for the degree of disease and is often monitored by immunoassays or in vitro ligand binding of a tumor biopsy sample. More preferable non‐invasive diagnosis is accessible using 16α‐[¹⁸F]FES (1) as PET tracer. Our aim was to develop a reliable, easy‐to‐use, remotely controlled synthesis for non carrier added (n.c.a.) 16α‐[¹⁸F]FES (1) by nucleophilic substitution using a disposable cassette for GE TRACERlab® MX_FDG. Purification of the crude product using solid phase extraction (SPE) cartridges, Oasis® WAX, HLB Plus, Sep‐Pak® C18 and Light Alumina N, allows abandonment of an HPLC purifying system. Formulation of the final product is included in the automatic synthesis. The experimental conditions for this easy‐to‐use synthesis for routine production of 16α‐[¹⁸F]FES (1) are given in detail. Within 75 min 16α‐[¹⁸F]FES (1) is produced in typically 20% n.c.a., radiochemical yield (non decay corrected). Chemical and radiochemical purity is >95% and >99%, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Radiosynthesis of 2‐exo‐(2′‐[18F]Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane ([18F]F2PhEP), a potent epibatidine‐based radioligand for nicotinic acetylcholine receptor PET imaging

2‐exo‐(2′‐Fluoro‐3′‐(4‐fluorophenyl)‐pyridin‐5′‐yl)‐7‐azabicyclo[2.2.1]heptane (F₂PhEP), a novel, epibatidine‐based, α4β2‐selective nicotinic acetylcholine receptor antagonist of low toxicity, as well as the corresponding N‐Boc‐protected chloro‐ and bromo derivatives as precursors for labelling with fluorine‐18 were synthesized from 7‐tert‐butoxycarbonyl‐7‐azabicyclo[2.2.1]hept‐2‐ene in 13, 19 and 8% overall yield, respectively. [¹⁸F]F₂PhEP was prepared in 8–9% overall yield (non‐decay‐corrected) using 1 mg of the bromo derivative in the following two‐step radiochemical process: (1) no‐carrier‐added nucleophilic heteroaromatic ortho‐radiofluorination with the activated K[¹⁸F]F‐Kryptofix^®₂₂₂ complex in DMSO using microwave activation at 250 W for 90 s, followed by (2) quantitative TFA‐induced removal of the N‐Boc protective group. Radiochemically pure (>95%) [¹⁸F]F₂PhEP (1.48–1.66 GBq, 74–148 GBq/µmol) was obtained after semi‐preparative HPLC (Symmetry^® C18, eluent aqueous 0.05 M NaH₂PO₄ CH₃CN: 78/22 (v:v)) in 75–80 min starting from an 18.5 GBq aliquot of a cyclotron‐produced [¹⁸F]fluoride production batch. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [18F]3‐[1‐(3‐fluoropropyl)‐(S)‐pyrrolidin‐2‐ylmethoxy]pyridine ([18F]NicFP): a potential α4β2 nicotinic acetylcholine receptor radioligand for PET

Nicotinic acetylcholine receptors are widely distributed throughout the human brain and are believed to play a role in several neurological and psychiatric disorders. In order to identify an effective PET radioligand for in vivo assessment of the α4β2 subtype of nicotinic receptor, we synthesized [¹⁸F]3‐[1‐(3‐fluoropropyl)‐(S)‐pyrrolidin‐2‐ylmethoxy]pyridine (NicFP). The in vitro K_D of NicFP was determined to be 1.1 nM, and the log P value obtained by HPLC analysis of the unlabelled standard was found to be 2.2. The radiosynthesis of [¹⁸F]NicFP was carried out by a nucleophilic substitution reaction of anhydrous [¹⁸F]fluoride and the corresponding mesylate precursor. After purification by HPLC, the radiochemical yield was determined to be 11.3±2.1% and the specific activity was 0.47±0.18 Ci/μmol (EOS, n = 3). The time of synthesis and purification was 99±2 min. The final product was prepared as a sterile saline solution suitable for in vivo use. Copyright © 2003 John Wiley & Sons, Ltd.     

Alternative synthesis for the preparation of 16α‐[18F]fluoroestradiol

We have developed a new precursor, 3,17β‐O‐bis(methoxymethyl)‐16β‐O‐p‐nitrobenzenesulfonylestriol (14c) of 16α‐[¹⁸F]fluoroestradiol ([¹⁸F]FES). Although we could not selectively protect the C17 alcohol in the presence of the C16 alcohol, we were able to prepare and chromatographically isolate the desired C16 TBDMS, C17,C3‐dimethoxymethyl (diMOM) protected estriol derivative and convert into the ultimate fluorination precursor. The MOM protective group proved to be more quickly removed than the cyclic sulfate group. The di‐MOM protective precursor at the C3 and C17 alcohols instead of a cyclic sulfate group shortened hydrolysis time. We prepared three different sulfonate precursors at C16 alcohol. After checking their reactivity in the [¹⁸F]fluorination step and considering the stability of the precursors, we obtained the best results with nosylate precursor 14c.     

A facile automated synthesis of N‐succinimidyl 4‐[18F]fluorobenzoate ([18F]SFB) for 18F‐labeled cell‐penetrating peptide as PET tracer

A fully automated synthesis of N‐succinimidyl 4‐[¹⁸F]fluorobenzoate ([¹⁸F]SFB) was carried out by a convenient three‐step, one‐pot procedure on the modified TRACERlab FX_FN synthesizer, including [¹⁸F]fluorination of ethyl 4‐(trimethylammonium triflate)benzoate as the precursor, saponification of the ethyl 4‐[¹⁸F]fluorobenzoate with aqueous tetrapropylammonium hydroxide instead of sodium hydroxide, and conversion of 4‐[¹⁸F]fluorobenzoate salt ([¹⁸F]FBA) to [¹⁸F]SFB treated with N,N,N′,N′‐tetramethyl‐O‐(N‐succinimidyl)uranium tetrafluoroborate (TSTU). The purified [¹⁸F]SFB was used for the labeling of Tat membrane‐penetrating peptide (containing the Arg‐Lys‐Lys‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Arg‐Pro‐Leu‐Gly‐Leu‐Ala‐Gly‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu‐Glu sequence, [¹⁸F]CPP) through radiofluorination of lysine amino groups. The uncorrected radiochemical yields of [¹⁸F]SFB were as high as 25–35% (based on [¹⁸F]fluoride) (n=10) with a synthesis time of～40 min. [¹⁸F]CPP was produced in an uncorrected radiochemical yields of 10–20% (n=5) within 30 min (based on [¹⁸F]SFB). The radiochemical purities of [¹⁸F]SFB and [¹⁸F]CPP were greater than 95%. Copyright © 2010 John Wiley & Sons, Ltd.     

Evaluation of [18F]2FP3 in pigs and non‐human primates

So far, no suitable 5‐HT₇R radioligand exists for clinical positron emission tomography (PET) imaging. [¹⁸F]2FP3 was first tested in vivo in cats, and the results were promising for further evaluations. Here, we evaluate the radioligand in pigs and non‐human primates (NHPs). Furthermore, we investigate species differences in 5‐HT₇R binding with [³H]SB‐269970 autoradiography in post‐mortem pig, NHP, and human brain tissue. Specific binding of [¹⁸F]2FP3 was investigated by intravenous administration of the 5‐HT₇R specific antagonist SB‐269970. [³H]SB‐269970 autoradiography was performed as previously described. [¹⁸F]2FP3 was synthesized in an overall yield of 35% to 45%. High brain uptake of the tracer was found in both pigs and NHPs; however, pretreatment with SB‐269970 only resulted in decreased binding of 20% in the thalamus, a 5‐HT₇R–rich region. Autoradiography on post‐mortem pig, NHP, and human tissues revealed that specific binding of [³H]SB‐269970 was comparable in the thalamus of pig and NHP. Despite the high uptake of [¹⁸F]2FP3 in both species, the binding could only be blocked to a limited degree with the 5‐HT₇R antagonists. We speculate that the affinity of the radioligand is too low for imaging the 5‐HT₇Rs in vivo and that part of the PET signal arises from targets other than the 5‐HT₇R.     

Chemoenzymatic n.c.a synthesis of the coenzyme UDP‐2‐deoxy‐2‐[18F]fluoro‐α‐D‐glucopyranose as substrate of glycosyltransferases

The development of ¹⁸F‐labelling methods adopted to proteins and bioactive peptides is of great interest in radiopharmaceutical sciences. In order to provide ¹⁸F‐labelled sugars as a polar prosthetic group for an enzymatic ¹⁸F‐labelling procedure, an appropriate nucleotide activated sugar is needed. Here, we present the radiosynthesis of n.c.a. UDP‐2‐deoxy‐2‐[¹⁸F]fluoro‐α‐D‐glucopyranose (UDP‐[¹⁸F]FDG) as a substrate for glycosyltransferases. The MacDonald synthesis of [¹⁸F]FDG‐1‐phosphate was successfully combined with an enzymatic activation to obtain UDP‐[¹⁸F]FDG directly in an aqueous medium located in the void volume of a solid phase cartridge. The radiochemical yield of UDP‐[¹⁸F]FDG was 20% (based on [¹⁸F]fluoride) after a total synthesis time of 110 min. Thus, an intermediate was provided for the enzymatic transfer of [¹⁸F]FDG using UDP‐[¹⁸F]FDG as glycosyl donor making use of a suitable glycosyltransferase. This would represent a highly selective and mild ¹⁸F‐labelling method for glycosylated biomolecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation of 3′‐deoxy‐3′‐[18F]fluorothymidine ([18F]FLT) in ionic liquid, [bmim][OTf]

Although 3′‐deoxy‐3′‐[¹⁸F]fluorothymidine ([¹⁸F]FLT) is a prospective radiopharmaceutical for the imaging of proliferating tumor cell, it is difficult to prepare large amount of [¹⁸F]FLT. We herein describe the preparation of [¹⁸F]FLT in an ionic liquid, [bmim][OTf] (1‐butyl‐3‐methyl‐imidazolium trifluoromethanesulfonate). At optimized condition, [¹⁸F]fluorinationin ionic liquid with 5 µl of 1 M KHCO₃ and 5 mg of the precursor yielded 61.5 ± 4.3% (n=10). Total elapsed time was about 70 min including HPLC purification. The rapid synthesis of [¹⁸F]FLT can be achieved by removing all evaporation steps. Overall radiochemical yield and radiochemical purity were 30 ± 5% and >95%, respectively. This method can use a small amount of a nitrobenzenesulfonate precursor and can be adapted for automated production. Copyright © 2006 John Wiley & Sons, Ltd.     

Substitution‐reduction: an alternative process for the [18F]N‐(2‐fluoroethylation) of anilines

Substitution of a halo atom (chloro or bromo) in easily prepared N‐haloacetyl‐anilines with no‐carrier added (NCA) cyclotron‐produced [¹⁸F]fluoride ion (¹⁸F, t_1/2= 109.8 min; β⁺=96.9%), followed by reduction with borane–tetrahydrofuran (BH₃–THF), provides an alternative route to NCA [¹⁸F]N‐(2‐fluoroethyl)‐anilines. This two‐step and one‐pot process is rapid (～50 min) and moderately high yielding (～40% decay‐corrected radiochemical yield (RCY) overall). In the nucleophilic substitution reaction, 18‐crown‐6 is preferred to Kryptofix^® 222 as complexing agent for the solubilization of the counter‐ion (K⁺), derived from an added metal salt, in acetonitrile. Weakly basic potassium bicarbonate is preferred as the added metal salt. Inclusion of a small amount of water, equating to 4–5 molar equivalents relative to 18‐crown‐6, base or precursor (held in equimolar ratio), is beneficial in preventing the adsorption of radioactivity onto the wall of the glass reaction vessel and for achieving high RCY in the nucleophilic substitution reaction. BH₃–THF is effective for the rapid reduction of the generated [¹⁸F]N‐fluoroacetyl‐aniline to the [¹⁸F]N‐(2‐fluoroethyl)‐aniline. Copyright © 2004 John Wiley & Sons, Ltd.     

Fully automated synthesis and purification of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[18F]fluorobenzamido]ethylpiperazine

We have developed an efficient synthesis method for the rapid and high‐yield automated synthesis of 4‐(2′‐methoxyphenyl)‐1‐[2′‐(N‐2″‐pyridinyl)‐p‐[¹⁸F]fluorobenzamido]ethylpiperazine (p‐[¹⁸F]MPPF). No‐carrier‐added [¹⁸F]F^? was trapped on a small QMA cartridge and eluted with 70% MeCN(aq) (0.4 mL) containing Kryptofix 222 (2.3 mg) and K₂CO₃ (0.7 mg). The nucleophilic [¹⁸F]fluorination was performed with 3 mg of the nitro‐precursor in DMSO (0.4 mL) at 190 °C for 20 min, followed by the preparative HPLC purification (column: COSMOSIL Cholester, Nacalai Tesque, Kyoto, Japan; mobile phase: MeCN/25 mm AcONH₄/AcOH = 200/300/0.15; flow rate: 6.0 mL/min) to afford p‐[¹⁸F]MPPF (retention time = 9.5 min). p‐[¹⁸F]MPPF was obtained automatically with a radiochemical yield of 38.6 ± 5.0% (decay corrected, n = 5), a specific activity of 214.3 ± 21.1 GBq/µmol, and a radiochemical purity of >99% within a total synthesis time of about 55 min. Copyright © 2012 John Wiley & Sons, Ltd.     

N‐Arylation of indoles with 4‐[18F]fluoroiodobenzene: synthesis of 18F‐labelled σ2 receptor ligands for positron emission tomography (PET)

The palladium‐mediated N‐arylation of indoles with 4‐[¹⁸F]fluoroiodobenzene as a novel radiolabelling method has been developed. Optimized reaction conditions were elaborated by variation of different catalyst systems (CuI/1,2‐diamines and Pd₂(dba)₃/phosphine ligands), bases and solvents in the reaction of indole with 4‐[¹⁸F]fluoroiodobenzene. Optimized reaction conditions (Pd₂(dba)₃/(2‐(dicyclohexyl‐phosphino)‐2′‐(N,N‐dimethylamino)‐biphenyl, NaOBu^t, toluene, 100°C for 20 min) were applied for the synthesis of ¹⁸F‐labelled σ₂ receptor ligands [¹⁸F]‐11 and [¹⁸F]‐13 which were obtained in 91 and 84% radiochemical yields, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

The first enzymatic method for C–18F bond formation: the synthesis of 5′‐[18F]‐fluoro‐5′‐deoxyadenosine for imaging with PET

The use of the key enzyme involved in carbon–fluorine bond formation in Streptomyces cattleya catalysing the formation of 5′‐fluoro‐5′‐deoxyadenosine (5′‐FDA) from fluoride ion and S‐adenosyl‐l‐methionine (SAM) was explored for its potential application in fluorine‐18 labelling of the adenosine derivative. Enzymatic radiolabelling of [¹⁸F]‐5′‐FDA was successfully carried out starting from SAM and [¹⁸F]HF when the concentration of the enzyme preparation was increased from sub‐mg/ml values to mg/ml values. The purity of the enzyme had no measurable effect on the radiochemical yield of the reaction and the radiochemical purity of [¹⁸F]‐5′‐FDA. Copyright © 2003 John Wiley & Sons, Ltd.     

Microfluidic radiosynthesis and biodistribution of [18F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid

Microfluidics technology has emerged as a powerful tool for the radiosynthesis of positron emission tomography (PET) and single‐photon emission computed tomography radiolabeled compounds. In this work, we have exploited a continuous flow microfluidic system (Advion, Inc., USA) for the [¹⁸F]‐fluorine radiolabeling of the malonic acid derivative, [¹⁸F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid ([¹⁸F]‐FPMA), also known as [¹⁸F]‐ML‐10, a radiotracer proposed as a potential apoptosis PET imaging agent. The radiosynthesis was developed using a new tosylated precursor. Radiofluorination was initially optimized by manual synthesis and served as a basis to optimize reaction parameters for the microfluidic radiosynthesis. Under optimized conditions, radio‐thin‐layer chromatography analysis showed 79% [¹⁸F]‐fluorine incorporation prior to hydrolysis and purification. Following hydrolysis, the [¹⁸F]‐FPMA was purified by C18 Sep‐Pak, and the final product was analyzed by radio‐HPLC (high‐performance liquid chromatography). This resulted in a decay‐corrected 60% radiochemical yield and ≥98% radiochemical purity. Biodistribution data demonstrated rapid blood clearance with less than 2% of intact [¹⁸F]‐FPMA radioactivity remaining in the circulation 60 min post‐injection. Most organs showed low accumulation of the radiotracer, and radioactivity was predominately cleared through kidneys (95% in 1 h). Radio‐HPLC analysis of plasma and urine samples showed a stable radiotracer at least up to 60 min post‐injection.     

Synthesis of [18F]‐labeled N‐3(substituted) thymidine analogues: N‐3([18F]fluorobutyl) thymidine ([18F]‐FBT) and N‐3([18F]fluoropentyl) thymidine ([18F]‐FPT) for PET

Syntheses of N‐3(substituted) analogues of thymidine, N‐3([¹⁸F]fluorobutyl)thymidine ([¹⁸F]‐FBT) and N‐3([¹⁸F]fluoropentyl)thymidine ([¹⁸F]‐FPT) are reported. 1,4‐Butane diol and 1,5 pentane diol were converted to their tosyl derivatives 2 and 3 followed by conversion to benzoate esters 4 and 5, respectively. Protected thymidine 1 was coupled separately with 4 and 5 to produce 6 and 7 , which were hydrolyzed to 8 and 9 , then converted to their mesylates 10 and 11 , respectively. Compounds 10 and 11 were fluorinated with n‐Bu₄N[¹⁸F] to produce 12 and 13 , which by acid hydrolysis yielded 14 and 15 , respectively. The crude products were purified by HPLC to obtain [¹⁸F]‐FBT and [¹⁸F]‐FPT. The radiochemical yields were 58–65% decay corrected (d.c.) for 14 and 46–57% (d.c.) for 15 with an average of 56% in three runs per compound. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 65–75 min from the end of bombardment (EOB). Copyright © 2006 John Wiley & Sons, Ltd.