Synthesis of [11C]atipamezole,a potential PET ligand for the α2‐adrenergic receptor in the brain

The α₂‐adrenergic receptor antagonist atipamezole has been labelled with carbon‐11 using [¹¹C]formaldehyde and 2‐ethyl‐2‐oxoacetylindane. Various routes are proposed for the synthesis of the latter: oxidation of 2‐acetyl‐2‐ethylindane, hydrolysis of 2‐diethoxy‐2‐indane and oxidation of 2‐diazoacetyl‐2‐ethylindane. The average radiochemical yield of [¹¹C]atipamezole was 24% based on [¹¹C]formaldehyde, and the synthesis time, including HPLC purification and formulation, was 45 min. Copyright © 2002 John Wiley & Sons, Ltd.     

A new approach for 11C–C bond formation: Synthesis of 17α‐(3′‐[11C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol

A new approach for ¹¹C–C bond formation via a Sonogashira‐like cross‐coupling reaction of terminal alkynes with [¹¹C]methyl iodide was exemplified by the synthesis of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol. The LC‐purified title compound was obtained in decay‐corrected radiochemical yields of 27–47% (n=8) based on [¹¹C]methyl iodide within 21–27 min after EOB. In a typical synthesis starting from 9.6 GBq [¹¹C]methyl iodide, 1.87 GBq of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol was synthesized in radiochemical purity >99%. The specific radioactivity ranged between 10 and 19 GBq/µmol, and the labeling position was verified by ¹³C‐NMR analysis of the corresponding ¹³C‐labeled compound. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of [11C]paclitaxel

[¹¹C]paclitaxel, a potential solid tumor imaging agent, was synthesized by reacting [α‐¹¹C]benzoyl chloride with the primary amine precursor of paclitaxel. The time for synthesis, purification, and formulation was 38 min from end of bombardment with an average specific radioactivity of 49.9 GBq/μmol (1349 mCi/μmol) at end of synthesis. The average decay corrected radiochemical yield was 7% with greater than 99% radiochemical purity. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and biological evaluation of [carboxyl‐11C]eprosartan

Essential hypertension occurs in approximately 25% of the adult population and one cause of hypertension is primary aldosteronism. Targeting the angiotensin II AT₁ receptor using PET and an appropriate tracer may offer a diagnostic method for adrenocortical tissue. This report describes the synthesis of the selective AT₁ receptor antagonist [carboxyl‐¹¹C]eprosartan 10, 4‐[2‐butyl‐5‐((E)‐2‐carboxy‐3‐thiophen‐2‐yl‐propenyl)‐imidazol‐1‐ylmethyl]‐[carboxyl‐¹¹C]benzoic acid, and its precursor (E)‐3‐[2‐butyl‐3‐(4‐iodo‐benzyl)‐3H‐imidazol‐4‐yl]‐2‐thiophen‐2‐ylmethyl‐acrylic acid 9. ¹¹C‐carboxylation of the iodobenzyl moiety was performed using a palladium‐mediated reaction with [¹¹C]carbon monoxide in the presence of tetra‐n‐butyl‐ammonium hydroxide in a micro‐autoclave using a temperature gradient from 25 to 140°C over 5 min. After purification by semipreparative HPLC, [carboxyl‐¹¹C]eprosartan 10 was obtained in 37–54% decay‐corrected radiochemical yield (from [¹¹C]carbon monoxide) with a radiochemical purity >95% within 35 min of the end of bombardment (EOB). A 5‐µAh bombardment gave 2.04 GBq of 10 (50% rcy from [¹¹C]carbon monoxide) with a specific activity of 160 GBq µmol^?1 at 34 min after EOB. Frozen‐section autoradiography shows specific binding in kidney, lung and adrenal cortex. In vivo experiments in rats demonstrate a high accumulation in kidney, liver and intestinal wall. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]propyl and [1‐11C]butyl iodide from [11C]carbon monoxide and their use in alkylation reactions

A method to prepare [1‐¹¹C]propyl iodide and [1‐¹¹C]butyl iodide from [¹¹C]carbon monoxide via a three step reaction sequence is presented. Palladium mediated formylation of ethene with [¹¹C]carbon monoxide and hydrogen gave [1‐¹¹C]propionaldehyde and [1‐¹¹C]propionic acid. The carbonylation products were reduced and subsequently converted to [1‐¹¹C]propyl iodide. Labelled propyl iodide was obtained in 58±4% decay corrected radiochemical yield and with a specific radioactivity of 270±33 GBq/µmol within 15 min from approximately 12 GBq of [¹¹C]carbon monoxide. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Butyl iodide was obtained correspondingly from propene and approximately 8 GBq of [¹¹C]carbon monoxide, in 34±2% decay corrected radiochemical yield and with a specific radioactivity of 146±20 GBq/µmol. The alkyl iodides were used in model reactions to synthesize [O‐propyl‐1‐¹¹C]propyl and [O‐butyl‐1‐¹¹C]butyl benzoate. Propyl and butyl analogues of etomidate, a β‐11‐hydroxylase inhibitor, were also synthesized. Copyright © 2006 John Wiley & Sons, Ltd.     

Radiosynthesis of [N‐methyl‐11C]methylene blue

In this paper we present the radiochemical synthesis of the novel compound [N‐methyl‐¹¹C]methylene blue. The synthesis of [N‐methyl‐¹¹C]methylene blue was accomplished by means of ¹¹C‐methylation of commercially available Azure B using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). Following purification [N‐methyl‐¹¹C]methylene blue was obtained with a radiochemical purity greater than 97% in a 4–6% decay corrected radiochemical yield. The synthesis was completed in an average of 35 min following the end of bombardment. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of (E)‐2,3′,4,5′‐tetramethoxy[2‐11C]stilbene

In this paper, we describe the radiosynthesis of the compound (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene, a potential, universal tumour positron emission tomography imaging agent. The production of (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was carried out via ¹¹C‐methylation of (E)‐2‐(hydroxy)‐3′,4,5′‐trimethoxystilbene by using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was obtained with a radiochemical purity greater than 95% in a 20 ± 2% decay‐corrected radiochemical yield, based upon [¹¹C]carbon dioxide. Synthesis, purification and formulation were completed on an average of 30 min following the end of bombardment (EOB). The specific radioactivity obtained was 1.9 ± 0.6 GBq/µmol at EOB. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and in vivo evaluation of [O‐methyl‐11C] 2‐(4‐methoxyphenyl)‐N‐(4‐methylbenzyl)‐N‐(1‐methyl‐ piperidin‐4‐yl)acetamide as an imaging probe for 5‐HT2A receptors

2‐(4‐Methoxyphenyl)‐N‐(4‐methylbenzyl)‐N‐(1‐methylpiperidin‐4‐yl)acetamide (AC90179, 4 ), a highly potent and selective competitive 5‐HT_2A antagonist, was labeled by [¹¹C]‐methylation of the corresponding desmethyl analogue 5 with [¹¹C]methyl triflate. The precursor molecule 5 for radiolabeling was synthesized from p‐tolylmethylamine in three steps with 46% overall yield. [¹¹C]AC90179 was synthesized in 30 min (30 ± 5% yield, EOS) with a specific activity of 4500 ± 500 Ci/mmol and >99% chemical and radiochemical purities. Positron emission tomography studies in anesthetized baboon revealed that [¹¹C] 4 Penetrates the blood–brain barrier (BBB) with a rapid influx and efflux of the tracer in all brain regions. Due to lack of tracer retention or specific binding, [¹¹C] 4 cannot be used as PET ligand for imaging 5‐HT_2A receptors. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [1‐11C]ethyl iodide from [11C]carbon monoxide and its application in alkylation reactions

A method is presented for preparing [1‐¹¹C]ethyl iodide from [¹¹C]carbon monoxide. The method utilizes methyl iodide and [¹¹C]carbon monoxide in a palladium‐mediated carbonylation reaction to form a mixture of [1‐¹¹C]acetic acid and [1‐¹¹C]methyl acetate. The acetates are reduced to [1‐¹¹C]ethanol and subsequently converted to [1‐¹¹C]ethyl iodide. The synthesis time was 20 min and the decay‐corrected radiochemical yield of [1‐¹¹C]ethyl iodide was 55 ± 5%. The position of the label was confirmed by ¹³C‐labelling and ¹³C‐NMR analysis. [1‐¹¹C]Ethyl iodide was used in two model reactions, an O‐alkylation and an N‐alkylation. Starting with approximately 2.5 GBq of [¹¹C]carbon monoxide, the isolated decay‐corrected radiochemical yields for the ester and the amine derivatives were 45 ± 0.5% and 25 ± 2%, respectively, based on [¹¹C]carbon monoxide. Starting with 10 GBq of [¹¹C]carbon monoxide, 0.55 GBq of the labelled ester was isolated within 40 min with a specific radioactivity of 36 GBq/µmol. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of a 11C‐labelled taxane derivative by [1‐11C]acetylation

The ¹¹C‐labelling of the taxane derivative BAY 59‐8862 ( 1 ), a potent anticancer drug, was carried out as a module‐assisted automated multi‐step synthesis procedure. The radiotracer [¹¹C]1 was synthesized by reacting [1‐¹¹C]acetyl chloride ( 6 ) with the lithium salt of the secondary hydroxy group of precursor 3 followed by deprotection. After HPLC purification of the final product [¹¹C]1 , its solid‐phase extraction, formulation and sterile filtration, the decay‐corrected radiochemical yield of [¹¹C]1 was in the range between 12 and 23% (related to [¹¹C]CO₂; n=10). The total synthesis time was about 54 min after EOB. The radiochemical purity of [¹¹C]1 was greater than 96% and the chemical purity exceeded 80%. The specific radioactivity was 16.8±4.7 GBq/µmol (n=10) at EOS starting from 80 GBq of [¹¹C]CO₂. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [O‐methyl‐11C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([11C]DMP696): a potential PET ligand for CRF1 receptors

Synthesis of [O‐methyl‐¹¹C]‐4‐(1,3‐dimethoxy‐2‐propylamino)‐2,7‐dimethyl‐8‐(2,4‐dichlorophenyl)[1,5‐a]pyrazolo‐1,3,5‐triazine ([¹¹C]DMP696), a highly selective CRF₁ antagonist has been achieved. The total time required for the synthesis of [¹¹C]DMP696 is 30 min from EOB using [¹¹C]methyl triflate in THF, with a 16% yield (EOS) and >99% chemical and radiochemical purities along with a specific activity of >2000 Ci/mmol (EOS). Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and evaluation of a 11C‐labelled angiotensin II AT2 receptor ligand

Three ¹¹C‐radiolabelled high‐affinity nonpeptide AT₂ receptor‐selective ligands were synthesized and one of these was evaluated as positron emission tomography (PET) tracer. The labelling reaction was performed via palladium(0)‐mediated aminocarbonylation of the aryl iodide substrate using [¹¹C]carbon monoxide as the labelled precursor. As an example, starting with 10.0 GBq [¹¹C]carbon monoxide, 1.10 GBq of the product N‐butoxycarbonyl‐3‐[4‐(N‐benzyl‐[¹¹C]carbamoyl)‐phenyl]‐5‐isobutylthiophene‐2‐sulphonamide [¹¹C]4d was obtained in 36% decay‐corrected radiochemical yield (from [¹¹C]carbon monoxide), 42 min from end of bombardment with a specific activity of 110 GBq·µmol^?1. The N‐isopropyl‐[¹¹C]carbamoyl‐analogue [¹¹C]4c (radiochemical purity >95%) was studied employing autoradiography, organ distribution, and small animal PET. In vitro autoradiography showed specific binding in the pancreas and kidney. Organ distribution in six rats revealed a high uptake in the liver, intestine, kidney, and adrenals. Small animal PET showed rapid and reversible uptake in the kidneys followed by accumulation in the urinary bladder suggesting fast renal excretion of the tracer. In addition, high accumulation was also seen in the liver. For future studies, more metabolically stable tracers will need to be developed. To the best of our knowledge, this is the first attempt of the use of PET imaging for the detection of expressed, fully functional AT₂ receptors in living subjects. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of [11C‐carbonyl]hydroxyureas by a rhodium‐mediated carbonylation reaction using [11C]carbon monoxide

[¹¹C]Hydroxyurea has been successfully labelled using [¹¹C]carbon monoxide at low concentration. The decay‐corrected radiochemical yield was 38±3%, and the trapping efficiency of [¹¹C]carbon monoxide in the order of 90±5%. This synthesis was performed by a rhodium‐mediated carbonylation reaction starting with azidotrimethylsilane and the rhodium complex being made in situ by chloro(1,5‐cyclooctadiene)rhodium(I) dimer ([Rh(cod)Cl]₂) and 1,2‐bis(diphenylphosphino)ethane (dppe). (¹³C)Hydroxyurea was synthesized using this method and the position of the labelling was confirmed by ¹³C‐NMR. In order to perform accurate LC–MS identification, the derivative 1‐hydroxy‐3‐phenyl[¹¹C]urea was synthesized in a 35±4% decay‐corrected radiochemical yield. After 13 µA h bombardment and 21 min synthesis, 1.6 GBq of pure 1‐hydroxy‐3‐phenyl[¹¹C]urea was collected starting from 6.75 GBq of [¹¹C]carbon monoxide and the specific radioactivity of this compound was in the order of 686 GBq/µmol (3.47 nmol total mass). [¹¹C]Hydroxyurea could be used in conjunction with PET to evaluate the uptake of this anticancer agent into tumour tissue in individual patients. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of diethyl [carbonyl‐11C]malonate from [11C]carbon monoxide by rhodium‐promoted carbonylation and its application as a reaction intermediate

Rhodium‐mediated carbonylation reaction was applied to synthesize diethyl [carbonyl‐¹¹C]malonate using [¹¹C]carbon monoxide at low concentration. The synthesis was performed starting with ethyl diazoacetate, ethanol and the rhodium complex being made in situ by chloro(1,5‐cyclooctadiene)rhodium(I) dimer ([Rh(cod)Cl]₂) and 1,2‐bis(diphenylphosphino)ethane (dppe), and the reaction is assumed to proceed via a ketene intermediate. The isolated radiochemical yield was 20% (75% analytical radiochemical yield) and the trapping efficiency of [¹¹C]carbon monoxide in the order of 85%. The specific radioactivity of this compound was measured at 127 GBq/µmol (7.28 nmol total mass) after 8 µAh bombardment and 35 min synthesis. The corresponding ¹³C‐labelled compound was synthesized using (¹³C)carbon monoxide to confirm the position of the carbonyl‐labelled atom by ¹³C‐NMR. Diethyl [carbonyl‐¹¹C]malonate was further used in subsequent alkylation step using ethyl iodide and tetrabutylammonium fluoride to obtain diethyl diethyl [carbonyl‐¹¹C]malonate in 50% analytical radiochemical yield. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of a mGluR5 antagonist using [11C]copper(I) cyanide

5‐(2‐Phenylethynyl)pyridine‐3‐[¹¹C]carbonitrile ([¹¹C]LY2232645), a metabotropic glutamate 5 receptor (mGluR5) antagonist, was synthesized by a no‐carrier‐added nucleophilic halogen displacement with [¹¹C]copper(I) cyanide. The average radiochemical yield was 2.5%, and the average specific activity was 1365 mCi/µmol at end‐of‐synthesis. The total time of synthesis, purification, and formulation was 26 min. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [11C]gefitinib for imaging epidermal growth factor receptor tyrosine kinase with positron emission tomography

We have synthesized N‐(3‐chloro‐4‐fluorophenyl)‐7‐[¹¹C]methoxy‐6‐[3‐(morpholin‐4‐yl)propoxy]quinazolin‐4‐amine, [¹¹C]gefitinib ([¹¹C]Iressa), a high affinity (IC₅₀ = 2 nM) inhibitor of the epidermal growth factor receptor tyrosine kinase (EGFR‐TK), in solution and in a semi‐automated stainless loop methylation system using [¹¹C]methyl triflate. The trapping efficiency for [¹¹C]methyl triflate in solution was higher than in the solvent film generated in the loop system, thus the overall radiochemical yield was considerably higher for the synthesis in solution. The average radiochemical yield for the solution chemistry was 15% with an average specific radioactivity of approximately 9000 mCi/µmole at EOS in one step from its corresponding desmethyl phenol precursor. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[Methyl‐11C]thymine ([11C]FMAU) via a Stille cross‐coupling reaction with [11C]methyl iodide

1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐[methyl‐¹¹C]thymine ([¹¹C]FMAU) [¹¹C]‐ 1 was synthesised via a palladium‐mediated Stille coupling reaction of 1‐(2′‐deoxy‐2′‐fluoro‐β‐D‐arabinofuranosyl)‐5‐(trimethylstannyl)uracil 2 with [¹¹C]methyl iodide in a one‐pot procedure. The reaction conditions were optimized by screening various catalysts and solvents, and by altering concentrations and reaction temperatures. The highest yield was obtained using Pd₂(dba)₃ and P(o‐tolyl)₃ in DMF at 130°C for 5 min. Under these conditions the title compound [¹¹C]‐ 1 was obtained in 28±5% decay‐corrected radiochemical yield calculated from [¹¹C]methyl iodide (number of experiments=7). The radiochemical purity was >99% and the specific radioactivity was 0.1 GBq/μmol at 25 min after end of bombardment. In a typical experiment 700–800 MBq of [¹¹C]FMAU [¹¹C]‐ 1 was obtained starting from 6–7 GBq of [¹¹C]methyl iodide. A mixed ¹¹C/¹³C synthesis to yield [¹¹C]‐ 1 /(¹³C)‐ 1 followed by ¹³C‐NMR analysis was used to confirm the labelling position. The labelling procedure was found to be suitable for automation. Copyright © 2002 John Wiley & Sons, Ltd.     

11C–C bond formation by palladium‐mediated cross‐coupling of alkenylzirconocenes with [11C]methyl iodide

A novel ¹¹C–C bond formation based on the palladium‐mediated cross‐coupling reaction of alkenylzirconocenes with [¹¹C]methyl iodide is described. The conversion of internal alkynes into the corresponding alkenylzirconocenes followed by transmetalation with Pd(PPh₃)₄ and subsequent cross‐coupling with [¹¹C]methyl iodide gave several ¹¹C‐labelled α,α′‐dimethyl‐substituted alkenes. The palladium complex Pd(PPh₃)₄ proved to be superior to Pt(PPh₃)₄ or Ni(PPh₃)₄ as transition metal complex. The scope and limitations of the novel palladium‐mediated cross‐coupling reaction of alkenylzirconocenes with [¹¹C]methyl iodide were tested with various internal alkynes. After heating at 60°C for 6 min radiochemical yields of up to 75% (based upon [¹¹C]methyl iodide) could be achieved. Copyright © 2006 John Wiley & Sons, Ltd.     

Reduction of [11C]CO2 to [11C]CO using solid supported zinc

A new method for the reduction of no‐carrier‐added [¹¹C]carbon dioxide into [¹¹C]carbon monoxide ([¹¹C]CO) is described, in which the reductant (zinc) is supported on fused silica particles. Using this setup, which allows for a reduction temperature (485°C) well above the melting point for zinc (420°C), radiochemical yields of up to 96% (decay‐corrected) were obtained. A slight decrease in radiochemical yield was observed upon repeated [¹¹C]CO productions (93 ± 3%, n  = 20). The methodology is convenient and efficient and provides a straightforward path to no‐carrier‐added production of [¹¹C]CO.     

A two‐step one‐pot radiosynthesis of the potent dopamine D2/D3 agonist PET radioligand [11C]MNPA

(R)‐(?)‐2‐[¹¹C]Methoxy‐N‐n‐propylnorapomorphine ([¹¹C]MNPA ([¹¹C]2)) is an agonist radioligand of interest for imaging D₂/D₃ receptors in vivo. Here we sought to develop an improved radiosynthesis of this radioligand. Reference 2 was synthesized in nine steps with an overall yield of about 5%, starting from codeine. Trimethylsilyldiazomethane proved to be a practical improvement in comparison to diazomethane in the penultimate methylation step. A protected precursor for radiolabeling ((R)‐(?)‐2‐hydroxy‐10,11‐acetonide‐N‐n‐propylnoraporphine, 4) was prepared from (R)‐(?)‐2‐hydroxy‐N‐n‐propylnorapomorphine (1) in 30% yield. [¹¹C]2 was prepared from 4 via a two‐step one‐pot radiosynthesis. The first step, methylation of 4 with [¹¹C]methyl triflate, occurred in quantitative radiochemical yield. The second step, deprotection of the catechol moiety with HCl and heat, yielded 60–90% of [¹¹C]2 giving an overall incorporation yield from [¹¹C]methyl triflate of 60–90%. In a typical run more than 1 GBq of [¹¹C]2, was produced from carbon‐11 generated from a 10‐min proton irradiation (16 MeV; 35 µA) of nitrogen–hydrogen target gas. The radiochemical purity of [¹¹C]2 was > 99% and specific radioactivity at the time of injection was 901±342 GBq/µmol (n=10). The total synthesis time was 35–38 min from the end of radionuclide production. The identity of [¹¹C]2 was confirmed by comparing its LC‐MS/MS spectrum with those of reference 2 and (R)‐(?)‐10‐methoxy‐2,11‐dihydroxy‐N‐n‐propylnoraporphine. Copyright © 2009 John Wiley & Sons, Ltd.