Evaluation of the drug release patterns and long term stability of aqueous and organic coated pellets by using blends of enteric and gastrointestinal insoluble polymers

The major aim of this study was to identify an efficient tool to adjust drug release patterns from aqueous and organic ethylcellulose (a gastrointestinal insoluble polymer) coated pellets and to evaluate the long term stability of the film coatings. Drug release was monitored during open and closed storage at 25 °C/60% RH (ambient conditions) and 40 °C/75% RH (stress conditions) for up to 24 months. Release of vatalanib succinate, a poorly soluble drug that demonstrates pH-dependent solubility, from pure ethylcellulose coated pellets was slow irrespectively of the type of coating and release medium. By addition of the enteric polymer methacrylic acid/ethyl acrylate copolymer (applied as aqueous Kollicoat MAE 30 DP dispersion or organic solution of Kollicoat MAE 100 P) to ethylcellulose broad ranges of drug release patterns could be achieved. For aqueous film coatings the addition of Kollicoat MAE 30 DP to ethylcellulose dispersions resulted in unaltered drug release kinetics during closed storage at ambient and stress conditions. The storage stabilizing effect of the added enteric polymer might be explained by the more hydrophilic nature of Kollicoat MAE 30 DP compared to ethylcellulose trapping water during film formation and improving polymer particle coalescence. However, during open storage of aqueous coated ethylcellulose:Kollicoat MAE 30 DP pellets at stress conditions drug release decreased due to further gradual polymer particle coalescence. In contrast, drug release rates from organic coated ethylcellulose:Kollicoat MAE 100 P pellets stored at ambient and stress conditions did not change which could be explained by differences in the film formation process. This clearly indicates that the presented concept of the addition of methacrylic acid/ethyl acrylate copolymer to ethylcellulose film coatings in combination with an organic coating process is able to achieve broad ranges of drug release patterns and to overcome storage instability.     

Compression of pellets coated with various aqueous polymer dispersions

Pellets coated with a new aqueous polyvinyl acetate dispersion, Kollicoat SR 30 D, could be compressed into tablets without rupture of the coating providing unchanged release profiles. In contrast, the compression of pellets coated with the ethylcellulose dispersion, Aquacoat ECD 30, resulted in rupture of the coating and an increase in drug release. Plasticizer-free Kollicoat SR coatings were too brittle and ruptured during compression. The addition of only 10% w/w triethyl citrate as plasticizer improved the flexibility of the films significantly and allowed compaction of the pellets. The drug release was almost independent of the compression force and the pellet content of the tablets. The inclusion of various tabletting excipients slightly affected the drug release, primarily because of a different disintegration rate of the tablets. The core size of the starting pellets had no influence on the drug release. Pellets coated with the enteric polymer dispersion Kollicoat 30 D MAE 30 DP [poly(methacrylic acid, ethyl acrylate) 1:1] lost their enteric properties after compression because of the brittle properties of this enteric polymer. Coating of pellets with a mixture of Kollicoat MAE 30 DP and Kollicoat EMM 30 D [poly(ethyl acrylate, methyl methacrylate) 2:1] at a ratio of 70/30 and compaction of the pellets resulted in sufficient enteric properties.     

Development of a novel osmotically driven drug delivery system for weakly basic drugs

The drug substance SAG/ZK has a short biological half-life and because of its weakly basic nature a strong pH-dependent solubility was observed. The aim of this study was to develop a controlled release (cr) multiple unit pellet formulation for SAG/ZK with pH-independent drug release. Pellets with a drug load of 60% were prepared by extrusion/spheronization followed by cr-film coating with an extended release polyvinyl acetate/polyvinyl pyrrolidone dispersion (Kollidon SR 30 D). To overcome the problem of pH-dependent drug release the pellets were then coated with a second layer of an enteric methacrylic acid and ethyl acrylate copolymer (Kollicoat MAE 30 DP). To increase the drug release rates from the double layered cr-pellets different osmotically active ionic (sodium and potassium chloride) and nonionic (sucrose) additives were incorporated into the pellet core. Drug release studies were performed in media of different osmotic pressure to clarify the main release mechanism. Extended release coated pellets of SAG/ZK demonstrated pH-dependent drug release. Applying a second enteric coat on top of the extended release film coat failed in order to achieve pH-independent drug release. Already low enteric polymer levels on top of the extended release coated pellets decreased drug release rates at pH 1 drastically, thus resulting in a reversal of the pH-dependency (faster release at pH 6.8 than in 0.1N HCl). The addition of osmotically active ingredients (sodium and potassium chloride, and sucrose) increased the imbibing of aqueous fluids into the pellet cores thus providing a saturated drug solution inside the beads and increasing drug concentration gradients. In addition, for these pellets increased formation of pores and cracks in the polymer coating was observed. Hence drug release rates from double layered beads increased significantly. Therefore, pH-independent osmotically driven SAG/ZK release was achieved from pellets containing osmotically active ingredients and coated with an extended and enteric polymer. In contrast, with increasing osmotic pressure of the dissolution medium the in vitro drug release rates decreased significantly.     

Evaluation of polyvinyl acetate dispersion as a sustained release polymer for tablets

Kollicoat SR 30D is a unique 30% aqueous dispersion of polyvinvyl acetate stabilized by polyvinyl-pyrrolidone intended for preparation of sustained release products. Detailed evaluation of this polymer dispersion as a sustained release coating for active pharmaceutical ingredients of two diverse classes of drugs was studied. A water insoluble drug (ibuprofen) and a water soluble drug (ascorbic acid) were selected as model active drugs. Ibuprofen was granulated using a GPCG-1 fluid bed processor prior to tableting, to improve the particle size and particle flow properties. In this process a 2(3) factorial design was implemented to evaluate the optimum process parameters such as spray rate, inlet air temperature and the inlet air velocity. The statistical model selected was Y(ijkl) = mu + tau(i) + beta(j) + theta(k) + (taubeta)ij + (betatheta)jk + (tautheta)ik + (taubetatheta)ijk + epsilon(ijkl). The factorial design showed that the spray rate, inlet air temperature, and inlet air velocity had a significant effect (p value <0.05) on the particle size. Significant improvement was observed in the flow properties of the granules. The granules were coated with Kollicoat SR30D dispersion using top spray method in the fluid bed processor. The dissolution studies showed that the release of ibuprofen decreased with an increase in the coating levels of Kollicoat SR 30 D. In the case of ascorbic acid, preparation of sustained release coated commercial granules was not possible due to the difficulty in coating a highly soluble drug particle. However, the coated granules when compressed into tablets showed some sustainability. Ibuprofen tablets manufactured with coated granules with a 15 g polymer for 300 g batch showed dissolution parameters of t50 and t90 at 4.2 hr and 7.5 hr, respectively. An approximate zero-type of release was observed when the polymer content was increased to 45 g for 300 g batch. Ascorbic acid tablets made with coated commercial granules having a total polymer content of 45 g per a 500 g batch showed an average dissolution t50 and t90 at 1.0 hr and 4.55 hr, respectively. When the total polymer content was increased to 60 g, per 500 g, the average dissolution t50 and t90 delayed to 1.40 hr and 7.20 hr, respectively.     

Technology evaluation: Kollicoat IR

INTRODUCTION: Developments in industrial pharmacy are often linked to the discovery of pharmaceutical excipients. Although recently introduced as a material for immediate release coatings, Kollicoat IR already has other applications. AREAS COVERED: In this review, the different properties and pharmaceutical applications of Kollicoat IR as an excipient are discussed. In the first part, the chemical structure and the physicochemical characteristics are examined. The second part is a presentation of the available Kollicoat IR products followed by a brief overview of the preclinical studies completed for its use as an instant release coating material. EXPERT OPINION: Although the polymer was intended as an immediate release coating material for tablets, grafting PEG with polyvinyl alcohol to form this polymer provides physicochemical properties that lead to ever-broadening applications. Understanding its properties can lead to the development of a new use for Kollicoat IR. The addition of Kollicoat IR to an ethylcellulose or polyvinyl acetate tablet coat was successful at modifying the drug release rate. Designing a successful controlled release coat simply requires acknowledgment of the drug release mechanism from the mixture of polymers that includes Kollicoat IR. Moreover, the interaction between Kollicoat IR and poorly soluble drugs produces fast-dissolving solid dispersions prepared using hot stage extrusion, spray drying, or freeze drying.     

Drug release mechanisms from Kollicoat SR:Eudragit NE coated pellets

Thin, free films based on Kollicoat SR:Eudragit NE blends were prepared by casting or spraying aqueous dispersions of these polymers, and were thoroughly characterized with respect to their water uptake behavior, water permeability, dry mass loss kinetics, mechanical properties and drug release patterns. A mechanistic mathematical model based on Fick's law of diffusion was used to quantify the experimentally measured release of metoprolol succinate from various types of systems. With increasing Eudragit NE content the films became more hydrophobic, resulting in decreased water permeability as well as water uptake rates and extents. In addition, the dry mass loss upon exposure to the release medium decreased. Consequently, the films' permeability for the drug decreased. Importantly, metoprolol succinate release from thin films was mainly controlled by pure diffusion, allowing for the determination of the apparent diffusion coefficient of the drug in the different polymeric systems. Knowing these values, drug release from coated pellets could be quantitatively predicted, assuming intact film coatings throughout the observation period. Comparison with independent experimental results showed that crack formation set on very rapidly in the polymeric membranes upon exposure to the release medium in the case of sugar starter cores, irrespective of the polymer:polymer blend ratio and investigated coating level. In contrast, the onset of crack formation was delayed as a function of the blend ratio and coating thickness in the case of microcrystalline cellulose starter cores, attracting less water into the pellets core. The obtained new insight into the underlying drug release mechanisms can be very helpful during device optimization and improve the safety of this type of advanced drug delivery systems.     

混合水分散体肠溶迟释薄膜性能研究

目的 采用肠溶型水分散体Eudragit?L30D-55和控释型水分散体Kollicoat?SR30D混合制备一种全新的对周围环境pH值具有响应的,同时具有迟释性能的聚合物薄膜。方法 采用铸膜法制备L30D-55∶SR30D混合水分散体游离膜,采用差示扫描量热法(DSC)测定薄膜玻璃化转变温度(glass transition temperature,Tg),万能材料试验机测试薄膜拉伸性能,杯法考察薄膜透湿性能。考察聚合物比例、附加剂种类和用量对薄膜性能的影响,并以制备泮托拉唑钠(PAZ-Na)肠溶迟释微丸考察包衣膜特性。结果 随着SR30D的增加,薄膜的Tg逐渐降低,强度和刚性变弱,韧性变强,透湿性能先不变后增加。随着增塑剂增加,薄膜刚性减弱,渗透性能增强。不溶性成分的加入可不同程度降低薄膜的渗透性。制备的肠溶迟释微丸在0.1 mol·L^-1盐酸中2 h药物损失量<5%,在pH 6.8缓冲液中可延迟10~20 min开始释放,并至90 min释放完全。结论 L30D-55∶SR30D混合水分散体制备的游离膜和包衣膜具有良好的理化性能,可用于肠溶调释制剂的研究和开发。     

Technology evaluation: Kollicoat IR

Introduction: Developments in industrial pharmacy are often linked to the discovery of pharmaceutical excipients. Although recently introduced as a material for immediate release coatings, Kollicoat IR already has other applications.

Areas covered: In this review, the different properties and pharmaceutical applications of Kollicoat IR as an excipient are discussed. In the first part, the chemical structure and the physicochemical characteristics are examined. The second part is a presentation of the available Kollicoat IR products followed by a brief overview of the preclinical studies completed for its use as an instant release coating material.

Expert opinion: Although the polymer was intended as an immediate release coating material for tablets, grafting PEG with polyvinyl alcohol to form this polymer provides physicochemical properties that lead to ever-broadening applications. Understanding its properties can lead to the development of a new use for Kollicoat IR. The addition of Kollicoat IR to an ethylcellulose or polyvinyl acetate tablet coat was successful at modifying the drug release rate. Designing a successful controlled release coat simply requires acknowledgment of the drug release mechanism from the mixture of polymers that includes Kollicoat IR. Moreover, the interaction between Kollicoat IR and poorly soluble drugs produces fast-dissolving solid dispersions prepared using hot stage extrusion, spray drying, or freeze drying.     

Enteric polymers as acidifiers for the pH-independent sustained delivery of a weakly basic drug salt from coated pellets

Weakly basic drugs and their salts exhibit a decrease in aqueous solubility at higher pH, which can result in pH-dependent or even incomplete release of these drugs from extended release formulations. The objective of this study was to evaluate strategies to set-off the very strong pH-dependent solubility (solubility: 80 mg/ml at pH 2 and 0.02 mg/ml at pH 7.5, factor 4000) of a mesylate salt of weakly basic model drug (pK_a 6.5), in order to obtain pH-independent extended drug release. Three approaches for pH-independent release were investigated: (1) organic acid addition in the core, (2) enteric polymer addition to the extended release coating and (3) an enteric polymer subcoating below the extended release coating. The layering of aspartic acid onto drug cores as well as the coating of drug cores with an ethylcellulose/Eudragit L (enteric polymer) blend were not effective to avoid the formation of the free base at pH 7.5 and thus failed to significantly improve the completeness of the release compared to standard ethylcellulose/hydroxypropyl cellulose (EC/HPC)-coated drug pellets. Interestingly, the incorporation of an enteric polymer layer underneath the EC/HPC coating decreased the free base formation at pH 7.5 and thus resulted in a more complete release of up to 90% of the drug loading over 18 h. The release enhancing effect was attributed to an extended acidification through the enteric polymer layer. Flexible release patterns with approximately pH-independent characteristics were successfully achieved.     

Physicochemical and release properties of pellets coated with Kollicoat SR 30 D, a new aqueous polyvinyl acetate dispersion for extended release

Kollicoat^® SR 30 D is a new aqueous colloidal polyvinyl acetate dispersion used for extended release coatings. Kollicoat^® SR 30 D is stable against sedimentation, has a low viscosity (54 mPas) and a negative zeta potential of −23.2 mV because of the presence of the anionic surfactant, sodium dodecyl sulfate. Because of its low minimum film formation temperature (MFT = 18 °C), plasticizer addition and a thermal after-treatment (curing) of coated pellets was not required. Coated pellets showed no aging or curing effect. The rate of release could be easily adjusted by varying the coating level. A subcoating layer of the hydrophilic polymer, polyvinyl alcohol, between an ibuprofen-containing core and the Kollicoat^® SR coating prevented the diffusion of the lipophilic, low melting ibuprofen into the polymer coating during storage. The drug release from Kollicoat^® SR 30 D coated pellets was almost independent of the pH and ionic strength of release medium.     

Influence of formulation and process variables on in vitro release of theophylline from directly-compressed Eudragit matrix tablets

Extended-release theophylline (TP) matrix tablets were prepared by direct compression of drug and different pH-dependent (Eudragit L100, S100 and L100-55) and pH-independent (Eudragit RLPO and RSPO) polymer combinations. The influence of varying the polymer/polymer (w/w) ratio and the drug incorporation method (simple blend or solid dispersion) was also evaluated. Drug release, monitored using the Through Flow Cell system, markedly depended on both the kind of Eudragit polymer combinations used and their relative content in the matrix. Maintaining a constant 1:1 (w/w) drug/polymers ratio, the selection of appropriate mixtures of pH-dependent and pH-independent polymers enabled achievement of a suitable control of TP release. In particular, matrices with a 0.7:0.3 w/w mixture of Eudragit L100-Eudragit RLPO showed highly reproducible drug release profiles, with an almost zero-order kinetic, and allowed 100% released drug after 360 min. As for the effect of the drug incorporation method, simple blending was better than the solid dispersion technique, which not only did not improve the release data reproducibility, but also caused, unexpectedly, a marked slowing down in drug release rate.     

Sustained-release of buspirone HCl by co spray-drying with aqueous polymeric dispersions

Sustained-release of buspirone HCl (BUH) was attempted by spray drying after dissolving in two commercially available aqueous polymeric dispersions (Eudragit RS 30 D or Kollicoat SR 30 D) at five different drug:polymer ratios (1:1, 1:2, 1:3, 1:6 and 1:9). The produced spray-dried agglomerates were evaluated in terms of their particle size and morphology, production yield, encapsulation efficiency and in-vitro release of BUH. Possible drug-polymer interactions were checked by Differential Scanning Calorimetry (DSC) and FT-IR spectroscopy. Scanning electron microscopy (SEM) was employed for the qualitative characterization of particle size and morphology. Encapsulation efficiency was generally high (around 100%) and independent of the polymeric dispersion type, while production yield was generally low (7.2-31.0%) and significantly lower for the case of Kollicoat SR 30 D (KSR) than for Eudragit RS 30 D (ERS). Scanning electron micrographs showed remarkable changes in size and shape of agglomerates due to the type of aqueous polymeric dispersion and drug:polymer ratio. In-vitro release of BUH from compacted co spray-dried agglomerates was remarkably slower and incomplete for the case of Kollicoat at drug:polymer ratio below 1, presumably due to increased plastic deformation of the developed coating instead of fragmentation in the case of Eudragit coating during compaction.     

Optimization of methacrylic acid ester copolymers blends as controlled release coatings using response surface methodology

The aim of this study was to statistically optimize the use of blends of methacrylic acid ester copolymers with different permeability properties as controlled-release coating systems for tablets to produce predictable predesigned release profiles. A full factorial design was used to study and optimize the use of methacrylic acid ester copolymers Eudragit RS 30D and Eudragit RL 30D as coating materials for controlled release. Directly compressed theophylline tablets were coated with aqueous dispersions containing different proportions of the two copolymers using a side-vented coating pan (Accela Cota). The effect of polymer loading level at 5, 7.5, and 10% weight gain and curing time at 50 degrees C for 12 and 24 hours were also evaluated. Coated tablets were tested for their drug release in water using a United States Pharmacopeia (USP) dissolution apparatus #2. The results showed that increasing the content of the lower permeability copolymer Eudragit RS 30D, increasing the polymer load, and increasing curing time at 50 degrees C resulted in slower drug release. A statistical model that describes and predicts the drug release properties of the coated tablets as a function of the copolymers ratio in the coating dispersion, polymer load, and curing time at 50 degrees C was developed. The most significant factor affecting drug release was found to be the ratio of the two copolymers in the coating dispersion followed by the curing time at 50 degrees C and the polymer loading level. Good correlations were observed between the model fitted values andthe experimental values. An optimized formula prepared by superimposing two-dimensional contour plots was prepared; its release profile was found to be in agreement with the prediction obtained from the model.     

Influence of the components of Kollicoat SR film on mechanical properties of floating pellets from the point of view of tableting

The influence of pellet core ingredients on pellet behaviour, e.g. during compression, is well known. In this study the influence of components of a Kollicoat SR polymer film on mechanical properties was investigated. The aim of this study was to evaluate the influence of polymer film components on the mechanical properties of the pellet as a whole, from the point of view of tableting. Tablets should disintegrate into undeformed pellets floating in this environment for 5-6 h, releasing the model drug--verapamil hydrochloride--if possible in a controlled way. The usefulness of texture analysis and work of compression measurement was also evaluated. Kollicoat SR in the form of a 30D aqueous dispersion was chosen as the main component of the polymer film. Polyvinyl pyrrolidone K-30 as a pore former, and propylene glycol, triethyl citrate and dibutyl sebacate plasticisers were selected as typical additives. The influence of different thickness of polymer film on behaviour during stress was also evaluated. After coating the cores with a 20 microm Kollicoat SR dispersion film, an increase in mechanical strength, in comparison to the pellet core, was observed (2.74 to 3.34 mJ). Addition of porophor increased the work of compression by 50% to 5.1 mJ. The investigation of the influence of plasticiser on film properties proved that the kind of plasticiser used in the polymer film had no effect on the mechanical properties of the film or pellets. Only in the case of the film with triethyl citrate was no distinct of the pellet core found. Pellets coated both with films with triethyl citrate and with dibutyl sebacate, in contrast to pellets with a film coating with propylene glycol, showed a significant decrease of the dissolution rate of verapamil hydrochloride (20, 10 and 40% at 6 hours, respectively). It is possible to compress pellets with a 50 microm polymer film without affecting the dissolution rate, as was confirmed during release studies. When using Kollicoat SR the most appropriate plasticizer seems to be triethyl citrate, and in this case a change of behavior during compression analysis by texture analyzer was observed. But so relationship was found between the type of plasticizer and the work needed to obtain a given deformation.     

Modulating pH-independent release from coated pellets: Effect of coating composition on solubilization processes and drug release

The aim of the study was to clarify the influences of three coating parameters on the drug release from chlorpheniramine maleate (CPM) pellets, coated with blends of poly(vinyl acetate) (PVAc) and poly(vinyl alcohol)-poly(ethylene glycol) (PVA-PEG) graft copolymer. A central composite design was implemented to investigate the effect of the polymer blend ratio, the film coat thickness and the plasticizer concentration on the drug release. The solubilization inside the pellets was monitored by EPR spectroscopy. The blending ratio of both the polymers and the film thickness were found to have a major influence on the drug release and the solubilization speed, in contrast to the plasticizer concentration. A pH-independent release profile was adjustable via modulating the polymer blend ratio and the coating thickness. A mathematical model was developed, providing a good predictability of the release profile, based on the film coat composition. This model offers the possibility to achieve a defined drug-release profile by selective adaptation of the film coat composition, in view of process times, feasibility or polymer costs.     

Influence of methacrylic and acrylic acid polymers on the release performance of weakly basic drugs from sustained release hydrophilic matrices

Weakly basic drugs and their salts exhibit a drop in aqueous solubility at high pH conditions, which can result in low and incomplete release of these drugs from sustained release formulations. The objective of this study is to modulate matrix microenvironmental pH by incorporation of acidic polymers and thus enhance the local solubility and release of basic drugs in high pH environment. Two weakly basic drugs, papaverine hydrochloride and verapamil hydrochloride with widely different pKa and aqueous solubilities at the pH of interest (6.8), were investigated for their release from hydrophilic matrices and the effect of a methacrylic (Eudragit L100-55) and an acrylic acid polymer (Carbopol 71G), were studied. For papaverine HCl, release increased with an increase in the levels of the acidic polymer used. Direct measurement of matrix pH using microelectrodes illustrated that the mechanism of release enhancement was based on modulation of microenvironmental pH. For verapamil HCl, incorporation of L100-55 resulted in release retardation due to an interaction between the anionic polymer and the cationic drug and the extent of retardation increased with an increase in the polymer level. The interaction product was characterized by NIR, FT-IR, and MTDSC techniques. Verapamil HCl release from Carbopol 71G based matrix tablets was higher than that from conventional hydroxypropyl methylcellulose (HPMC) based matrices, without any incorporated acidic additives.     

Influence of an enteric polymer on drug release rates of theophylline from pellets coated with Eudragit RS 30D

The purpose of this research study was to investigate the influence of an enteric polymer on the drug release properties of theophylline pellets coated with Eudragit RS 30D. Theophylline pellets were coated with aqueous colloidal dispersions of Eudragit RS 30D containing various amounts of Eudragit L 100-55. The effect of storage conditions on the release of drug from coated pellets was determined as a function of the pH of the dissolution medium. The results from the dissolution study showed significant changes in the dissolution rate of theophylline from pellets coated with Eudragit RS 30D when cured at 40 degrees C for 4 days. No change in the drug release rate was observed when Eudragit L100-55 was present in the Eudragit RS 30D dispersion. Increasing the ratio of Eudragit L100-55 to Eudragit RS 30D resulted in faster drug release rates from the coated pellets. An increase in the pH of the dissolution medium was found to enhance drug release from the pellets coated with Eudragit RS 30D containing Eudragit L 100-55. Theophylline pellets when coated with Eudragit RS 30D containing the enteric polymer Eudragit L100-55 demonstrated no aging effects when stored at elevated temperatures. The overcoating of the pellets with Eudragit RD 100 did not affect the drug release profiles and prevented the particles from agglomerating during curing and storage.     

Calcium Alginate Beads as Core Carriers of 5-Aminosalicylic Acid

The utilization of calcium alginate beads as core carriers for delayed dissolution followed by burst release as a potential method of intestinal site specific drug delivery was investigated. 5-Aminosalicylic acid was spray-coated on dried calcium alginate beads and then coated with different percentages of enteric coating polymer and/or sustained-release polymer. Beads coated with more than 6% (w/w) methacrylic copolymer plastisized with dibutyl sebacate and triethyl citrate resisted release in 2-hr acid fluid challenge and allowed immediate dissolution upon transfer to simulated intestinal fluid. With 6% (w/w) methacrylic copolymer on top of 4% (w/w) ethylcellulose polymer, the major portion of drug did not release in 2 hr of acid treatment or the next 3 hr of simulated intestinal fluid treatment. This dosage form provides the possibility to deliver drug to the lower intestinal tract with minimal early release, followed by sustained release in the colon.     

Chitosan/Kollicoat SR 30D film-coated pellets of aminosalicylates for colonic drug delivery

The purpose of the study was to (i) prepare the chitosan/Kollicoat SR 30D film-coated pellets for colonic drug delivery, and (ii) evaluate the colonic delivery and efficacy of these coated pellets in the rat. The pellets were coated to different film thickness with chitosan/Kollicoat SR 30D formulations. In vitro drug release was assessed in simulated gastrointestinal (GI) tract conditions. Biodistribution of aminosalicylates (5-ASA) in GI tract and plasma was measured after oral administration of coated or uncoated 5-ASA pellets. Efficacy of the coated or uncoated 5-ASA pellets was tested in 2,4,6-trinitrobenzene sulfonic acid (TNBS)-induced rat colitis model. Healing of induced colitis was assessed by measuring the myeloperoxidase activities, colon wet weight/body weight, and damage score. The coating was susceptible to bacteria digestion, resulting in an increase in the release of 5-ASA from the coated pellets. After administration of the coated pellets, the drug concentration in the large intestine was higher than those of uncoated pellets. In plasma, the observed mean C_max from the coated pellets was significantly lower than that of the uncoated pellets. Chitosan/Kollicoat SR 30D film-coated pellets could deliver the 5-ASA to the targeted site, providing effective treatment for inflammatory bowel disease. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99:186–195, 2010     

An investigation into the characteristics of chitosan/Kollicoat SR30D free films for colonic drug delivery

The purpose of the study was to establish the physico-mechanical, digestibility, permeability and swelling properties of chitosan/Kollicoat SR30D films as potential coatings for colonic drug delivery. Free films containing different ratios of chitosan to Kollicoat SR30D were prepared by casting/solvent evaporation method. The resultant mixed films were characterized in terms of puncture strength and elongation (%), glass transition temperature, swellability, polymer miscibility, permeability, and digestibility under different media. The mixed films possessed good mechanical properties, which could be used as film-coating materials for drug delivery. The extent of digestion was directly proportional to the amount of chitosan present within the film. No apparent miscibility was detected between the chitosan and Kollicoat SR30D, regardless of the film composition. The films were found to be susceptible to digestion by bacterial or β-glucosidase enzymes in simulated colonic fluid (SCF). The SCF with rat cecal bacterial enzymes had a more profound hydrolytic activity than that with β-glucosidase enzyme for the digestion of chitosan within the mixed films. Overall, the results indicated that such chitosan/Kollicoat SR30D films had potential as a coating system for drug delivery to the colon.