Isolation of coffee diterpenes by means of high-speed countercurrent chromatography

Many different physiological activities have been ascribed to coffee diterpenes, such as cholesterol increasing activity for the diterpenes kahweol and cafestol. Another member of this class, namely the diterpene 16-O-methylcafestol, is used as a marker substance for robusta coffee. Up to now, methodologies for the preparative isolation of these key coffee ingredients are still limited. In this study, high-speed countercurrent chromatography (HSCCC) was successfully employed for the isolation and purification of different diterpenes (i.e. kahweol, cafestol, 16-O-methylkahweol, 16-O-methylcafestol, dehydrokahweol, and dehydrocafestol) from Coffea arabica and Coffea canephora var. robusta. The solvent systems consisted of hexane–ethyl acetate–ethanol–water mixtures. Identity and purity of the isolated compounds were confirmed by high-performance liquid chromatography with photo diode array detection (HPLC-PDA) and HPLC–multiple mass spectrometry (HPLC–MSⁿ) as well as NMR measurements.     

Genetic diversity of nutritionally important carotenoids in 94 pea and 121 chickpea accessions

Biofortification of staple crops via breeding is an attractive strategy for reducing human micronutrient deficiencies. The objective of this research was to examine the concentration of carotenoids in diverse pea and chickpea accessions grown in Saskatchewan (Canada) using high performance liquid chromatography. In pea accessions mean concentration of lutein was highest (11.2 μg g⁻¹) followed by β-carotene (0.5 μg g⁻¹), zeaxanthin (0.3 μg g⁻¹), and violaxanthin (0.3 μg g⁻¹). Green cotyledon pea accessions were richer in β-carotene and total carotenoids compared to yellow cotyledon accessions. In chickpea accessions mean concentration of lutein (8.2 μg g⁻¹) was highest followed by zeaxanthin (6.2 μg g⁻¹), β-carotene (0.5 μg g⁻¹), β-cryptoxanthin (0.1 μg g⁻¹), and violaxanthin (0.1 μg g⁻¹). Desi chickpea accessions had higher carotenoid concentration than kabuli accessions. This research identified pea and chickpea accessions that can be utilized in breeding for the improvement of carotenoid concentration through biofortification.     

Optimization of cheese sample preparation methodology for free amino acid analysis by capillary isotachophoresis

The objective of this work was the evaluation of different conditions for the selected free amino acids extraction from cheese samples, followed by capillary isotachophoresis analysis. Parameters of the extraction: concentration and type of extraction reagents (solvents: methanol, ethanol and mineral acids: perchloric acid, trichloroacetic acid, sulphuric acid and hydrochloric acid), time and temperature, and isotachophoretic separation conditions (voltage, time) were studied. Repeatability, reproducibility and stability of this method at different conditions are discussed. The best yield of free amino acids was obtained after triple extraction (30 min each process) with 0.1 M hydrochloric acid at 50 °C. Histidine, lysine, arginine, ornithine, tyrosine, and phenylalanine were determined using calibration curves and the standard additions method in different types of cheeses. The highest level of amino acids was determined in semi-hard cheese (2626.3 mg 100 g⁻¹ – calibration curve, and 2679.2 mg 100 g⁻¹ – standard additions method), whereas the lowest were found in sheep cheese (426.3 mg 100 g⁻¹ and 455.7 mg 100 g⁻¹, respectively), and Gouda type cheese samples (441.5 mg 100 g⁻¹ and 472.8 mg 100 g⁻¹, respectively).     

Single-run analysis of vitamin D photoproducts in oyster mushroom (Pleurotus ostreatus) after UV-B treatment

A single-run high performance liquid chromatography (HPLC) with diode array detector (DAD) based method was developed for the separation, identification and comprehensive quantification of degradation products of ergosterol formed in oyster mushroom (Pleurotus ostreatus) after UV-B exposure. After 60 min, 10 substances involved in the photoprocess were separated, identified by their characteristic DAD spectrum and distinguished by their molecular weight, in cases where spectra were identical: vitamin D₂, previtamin D₂, tachysterol₂, lumisterol₂ and ergosterol, and, in minor quantity, their structural analogues of the 22,23-dihydroergocalciferol (vitamin D₄) series. Sample preparation protocol affected the total yields and the ratios of previtamin and vitamin D₂/D₄. Hot alkaline hydrolysis resulted in the best digestion of the mushroom matrix and accordingly gave the highest vitamin D yield (D₂: 141.32 μg g⁻¹ dry matter, DM; D₄: 22.72 μg g⁻¹ DM). Limit of detection for vitamin D_2/4 was 0.02 μg g⁻¹ dry matter (DM) and was estimated for previtamin D_2/4 (0.06 μg g⁻¹ DM), tachysterol_2/4 (0.02 μg g⁻¹ DM) and lumisterol_2/4 (0.06 μg g⁻¹ DM). Recovery of spiked vitamin D₂ was 97 ± 0.7%. The study provides an analytical tool to assess the process of vitamin D generation after UV-B treatment for the production of oyster mushrooms with a balanced nutritional profile of vitamin D compounds.     

An efficient,rapid and microwave-accelerated dispersive liquid–liquid microextraction method for extraction and pre-concentration of some organophosphorus pesticide residues from aqueous samples

In this paper, microwave-accelerated dispersive liquid–liquid microextraction has been developed for the extraction/preconcentration of some organophosphorus pesticides from aqueous samples prior to their analysis by gas chromatography–flame ionization detection. In this method, temperature of a high volume of aqueous sample is elevated by a microwave oven and then a mixture of extraction and disperser solvents is rapidly injected into the aqueous phase. After cooling to room temperature, the phase separation is accelerated by centrifuging. The main experimental factors affecting performance of the method including type and volume of the extraction and disperser solvents, temperature, pH, and salt addition were investigated and optimized. Under the optimum extraction conditions, the method resulted in low limits of detection and quantification within the ranges of 0.65–1.3 and 2.2–4.5 μg L⁻¹, respectively. Relative standard deviations were in the range of 2–7% (C = 40 or 100 μg L⁻¹) for intra-day (n = 6) and inter-day (n = 4) precisions. Finally, the proposed method was successfully applied to analysis of the target analytes in surface water and well water and fruit juice samples; diazinon was determined at μg L⁻¹ level in apple juice.     

The effect of frying on anthocyanin stability and antioxidant activity of crisps from red- and purple-fleshed potatoes (Solanum tuberosum L.)

Red- and purple-fleshed potatoes (Solanum tuberosum L.) are a good source of polyphenols, mainly anthocyanins as one of the most important components. The chemical composition with reducing sugars and the total polyphenol contents were analyzed in four purple potato varieties (Salad Blue, Vitelotte, Valfi, Blue Congo) and three red-fleshed potato varieties (Rosalinde, Herbie 26, Highland Burgundy Red). The anthocyanin composition of raw potato and potato crisps was characterized by high-performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS) method. Moreover, the antioxidant activity was measured with the radical scavenging assays using 2,2′-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical as well as ferric reducing ability of plasma assay (FRAP). In addition, colour parameters in prepared potato crisps were evaluated. Both red and purple-fleshed potato varieties contained high levels of total polyphenols (227–845 mg 100 g⁻¹ dry weight) and anthocyanins (21–109 mg 100 g⁻¹ dry weight). The process of frying caused degradation of anthocyanin compounds (38–70%). The HPLC–MS/MS analysis showed that pelargonidin and malvidin derivates were more stable during frying than petunidin derivatives. Although frying process affected the anthocyanin and polyphenol levels, obtained potato crisps exhibited bright intensive colour and good antioxidant activity.     

Mineral composition and bioaccessibility in Sarcocornia ambigua using ICP-MS

This study evaluates the nutritional potential of Sarcocornia ambigua as new a source of minerals. The mineral concentrations of two different growing populations (natural occurrence and irrigated) of S. ambigua were evaluated using inductively coupled plasma mass spectrometry. In all samples, the mineral present in highest amounts was potassium (K) (19–24 μg g⁻¹), followed by magnesium (Mg) (8.6–14 μg g⁻¹) and then calcium (Ca) (2.6–4.0 μg g⁻¹). In addition, in vitro bioacessibility assay demonstrated that very high fraction (65–80%) of these K and Mg (80 and 65%) of total concentration of these elements is bioacessible from S. ambigua analyzed. The trace elements vanadium (V), chromium (Cr), cobalt (Co), copper (Cu) and lithium (Li) have more than above 50% of total concentration was found bioaccessible. In all cases, mass balance was verified by carrying out the total digestion of the remaining residue and the relationship between total concentration and bioaccessibility. The data related to the concentrations and the bioaccessible fractions of the minerals provide a starting point for more complex and in-depth evaluations from the nutritional point of view, including the establishment of a recommended daily dietary intake for this plant.     

Essential and non-essential elements in Brazilian infant food and other rice-based products frequently consumed by children and celiac population

Rice and its derivatives are important source of essential and non-essential elements. Essential elements as cobalt (Co) and selenium (Se) are vital for human homeostasis. However, non-essential elements such as arsenic (As), cadmium (Cd) and lead (Pb) may be present in rice-based food and consequently, people can be exposed—especially children and the celiac population. This study aimed to determine essentials and non-essentials elements in rice-based products and baby food and also to evaluate nutritional risk by estimating the daily intake of non-essential elements. Regarding essential elements, Co and Se presented the highest concentrations in rice flour (56 μg kg⁻¹) and porridge (254 μg kg⁻¹), respectively. For non-essential elements, the highest concentrations of As, Cd and Pb were 104 μg kg⁻¹ (porridge), 16 μg kg⁻¹ (flour), and 188 μg kg⁻¹ (bread), respectively. Total As concentration in Brazilian rice-based baby food was <29 μg kg⁻¹. However, As-speciation revealed inorganic-As (i-As) as the main specie. The highest estimated daily intake of Cd, Pb and i-As were 1.37 (rice-based baby food); 10.39 (pasta); and 3.34 (pasta) μg d⁻¹, respectively. Therefore, continuous food monitoring for nutritional and toxicological purpose is necessary, especially concerning these particular populations and discussions for maximum levels of non-essential elements.     

Proximate composition and lipid profile of red mullet (Mullus barbatus) from two sites of the Tyrrhenian and Adriatic seas (Italy): a seasonal differentiation

Proximate composition, unsaponifiable lipid components (cholesterol, squalene, tocopherols, all-trans retinol, total carotenoids) and fatty acid profile were evaluated on red mullet (Mullus barbatus) caught in the Central Tyrrhenian and Central Adriatic seas (Italy). The study was conducted in spring, the reproduction period, and in autumn, the period of maximum recruitment and market demand for this species. Results showed that, in fish from both sites, protein (18.1–18.8 g 100 g⁻¹), nonprotein nitrogen (0.32–0.35 g 100 g⁻¹), ash (1.27–1.42 g 100 g⁻¹) and cholesterol (56.8–73.7 mg 100 g⁻¹) contents were almost stable. Total lipid levels were highly variable, with very low levels in spring (0.96–1.48 g 100 g⁻¹) and high levels in autumn (7.28–8.72 g 100 g⁻¹). On a total fatty acids basis, polyunsaturated fatty acids (PUFA) were significantly higher in spring (30–40% of total fatty acids), when fish was lean, than in autumn (20%), while monounsaturated fatty acids were significantly higher in autumn (35–38%) than in spring (18–29%). Saturated fatty acids were almost stable throughout the year (34–39% of total fatty acids). Red mullet from the two sites showed a good nutritional value; in particular they proved to be a good source of n-3 PUFA, which accounted for 75–80% of total PUFA, regardless of the fishing season. However, it was in autumn that red mullet exhibited the highest content of n-3 PUFA (>1000 mg 100 g⁻¹ wet fillet). The comparison of samples by geographical origin showed no difference in autumn, while slight differences were observed in spring.     

Non-destructive determination of β-carotene content in mango by near-infrared spectroscopy compared with colorimetric measurements

Non-destructive applications for the detection of food quality, especially internal properties, are highly relevant for process control in the food industry. In this respect, colour measurement and near-infrared spectroscopy (NIRS) were evaluated and compared for their ability to predict β-carotene content in mango cv. ‘Nam Dokmai’. Colorimetric analysis of peel and flesh colour as well as NIR measurements in the short- (700–1100 nm) and long-wave regions (1000–2500 nm) were analysed for prediction ability. It was found that β-carotene content could be estimated by multiple linear regression (MLR) models developed from b* and hue angle (h°) values of the flesh with good results for coefficient of determination (R²) and standard errors of cross validation (SECV) of 0.941 and 10.2 retinol equivalents (RE) 100 g⁻¹ edible part (EP), respectively, while peel colour showed poor results. However, flesh colour measurement is a destructive method. NIRS calibration showed good results with R² > 0.800 and standard error of prediction (SEP) 11.642–20.2 RE 100 g⁻¹ EP. Long-wave NIR provided better prediction ability than short-wave. From these results, NIRS can be recommended for non-destructive and reliable determination of β-carotene content in mango. The results have implications for quality control in the industrial handling and processing of fruits.     

Fast method for the determination of copper,manganese and iron in seafood samples

A slurry sampling flame atomic absorption spectrometric method is proposed for the determination of copper, manganese and iron in oysters (Crassostrea rhizophora), clams (Anomalocardia brasiliana) and mussels (Mytella guiyanensis; Perna perna). Optimization was carried out using univariate methodology involving the following variables: nature and concentration of the acid solution for slurry preparation, sonication time and sample mass. The optimized conditions were 80 mg of sample ground in a cryogenic mil, dilution using 1.0 mol L⁻¹ nitric /hydrochloric acid solution, sonication time of 30 min and a slurry volume of 10 mL. The calibration curves had been prepared using standards of copper, manganese and iron also in 1.0 mol L⁻¹ nitric/hydrochloric acid solution. This method allowed the determination of copper, manganese and iron by FAAS, with detection limits of 0.17, 0.09 and 0.46 μg g⁻¹, respectively. The precision, expressed as relative standard deviation (RSD), are 3.0%, 2.9% and 3.8% (n=10), for concentrations of copper, manganese and iron of 17, 22 and 719 μg g⁻¹, respectively. The accuracy of the method was confirmed by analysis of the certified oyster tissue (NIST 1566b). The proposed method was applied for the determination of copper, manganese and iron in samples of oyster, clams and mussels, collected in Ubatuba and Todos os Santos Bay, Brazil. The obtained concentrations varied between 17.1 and 143.9 μg g⁻¹, 17.9 and 29.7 μg g⁻¹ and 364 and 1388 μg g⁻¹, respectively, for copper, manganese and iron. These values agree well with other data reported in the literature. The results showed no significant differences (P>0.005) using the proposed method with those obtained after complete digestion and determination by inductively coupled plasma-optical emission spectroscopy (ICP-OES).     

Geographical discrimination of Italian honey by multi-element analysis with a chemometric approach

In this study the concentrations of K, Ca, Mg, Na, Al, Zn, Fe, Mn, Cu, Cr, Ni, Se, Pb, Cd, and As in 39 honey samples of different botanical (orange-blossom, lemon-blossom, chestnut, eucalyptus, acacia, sulla and wildflower honeys) and geographical (Sicily and Calabria, Italy) origin were determined by ICP-OES and ICP-MS. The most abundant minerals decreased in the following order: K (mean value: 1.57 mg g⁻¹) > Ca (0.2 mg g⁻¹) > Mg (0.121 mg g⁻¹) > Na (0.092 mg g⁻¹). Recommended Dietary Allowance (RDA) values and benchmark levels were employed to assess the honey quality and safety. The data excluded toxicological risks: for an adult of 60 kg, a daily intake of 2 g of honey covered maximum 0.40% of Tolerable Weekly Intake (TWI) for Al, 0.33% of Benchmark Dose of 1% Extra Risk (BMDL01) for Pb, and 0.07% of Tolerable Daily Intake (TDI) for Ni. Mineral content marks the differences in honey samples from different geographical origin despite the botanical factor weight and can be used as a tool to assess the traceability of honeys. The discrimination between Sicilian and Calabrian honeys was achieved by Principal Component Analysis (PCA), and also the results of Canonical Discriminant Analysis (CDA) indicate that the 100% of total samples are correctly classified. This research contributes to the studies to determine the geographical origin of honeys.     

Phenolic composition and antioxidant capacity of bacaba-de-leque (Oenocarpus distichus Mart.) genotypes

Phenolic compound composition and antioxidant capacity of four Oenocarpus distichus Mart. (bacaba-de-leque) genotypes were determined. In order to set the parameters for phenolic compound extraction, the effect of methanol concentration and extraction time on the reducing power of the extracts was evaluated using the surface response methodology. The optimal conditions were: a 60:40 methanol:water (v/v) solution and 11 min of extraction. Extracts were analyzed by ultra-high performance liquid chromatography with diode array detection and by ultra-high performance liquid chromatography coupled to mass spectrometry. Eleven substances were identified, of which six were quantified. Rutin was the major compound in bacaba-de-leque genotypes (15.2–56.8 μg.g⁻¹) followed by epicatechin (15.5–21.2 μg.g⁻¹). The Black-03 genotype had the highest amounts of all phenolic compounds and the highest antioxidant capacity by DPPH and ORAC assays, indicating that this genotype may be selected in breeding programs to obtain cultivars with higher phenolic compound contents and antioxidant capacity. Moreover, the results indicated that bacaba-de-leque has great potential as a novel supplier of phenolic acids and flavonoids to human diet, with levels comparable to or higher than other fruits belonging to the same family, such as açaí.     

Evaluation of polycyclic aromatic hydrocarbons in Circassian cheese by high-performance liquid chromatography with fluorescence detection

Polycyclic aromatic hydrocarbons (PAH) in traditional/industrial smoked and unsmoked Circassian cheeses available in Turkish markets were analysed using solid-phase extraction, followed by high-performance liquid chromatography (HPLC) with fluorescence detection. Mean levels of a total of 9 PAHs in smoked traditional and industrial Circassian cheeses were 19.6 and 6.73 μg kg⁻¹, while levels in unsmoked traditional and industrial cheeses were 0.77 and 0.49 μg kg⁻¹, respectively. The dominant individual PAHs found were naphthalene and acenaphthene. Benzo[a]pyrene, a marker compound representing carcinogenic PAHs, was found in 90% and 30% of traditional smoked and unsmoked Circassian cheeses, 52% and 24% of industrial smoked and unsmoked cheeses, respectively. Correlation statistical analysis showed that benzo[a]pyrene was a good marker for total 9 PAHs in Circassian cheese samples (r_{B[a]P/sum of 9 PAHs} = 0.816, p < 0.01) as well as the best marker for 5 carcinogenic PAHs (r_{B[a]P/carcinogenic PAHs} = 0.904, p < 0.01). Risk assessment conducted using daily intakes of sum of 9 PAH levels found in both traditional and industrial smoked Circassian cheese samples showed high risk compared with unsmoked cheeses.     

Levels and sources of volatile organic compounds including carbonyls in indoor air of homes of Puertollano,the most industrialized city in central Iberian Peninsula. Estimation of health risk

Twenty nine organic air pollutants including carbonyl compounds, alkanes, aromatic hydrocarbons and terpenes were measured in the indoor environment of different houses together with the corresponding outdoor measurements in Puertollano, the most industrialized city in central Iberian Peninsula. VOCs were sampled during 8 weeks using Radiello^® passive samplers, and a questionnaire on potential VOCs sources was filled out by the occupants. The results show that formaldehyde and hexanal was the most abundant VOCs measured in indoor air, with a median concentration of 55.5 and 46.4 μg m⁻³, respectively followed by butanal (29.1 μg m⁻³), acetone (28.4 μg m⁻³) and acetaldehyde (21.4 μg m⁻³). After carbonyls, n-dodecane (13.1 μg m⁻³) and terpenes (α-pinene, 13.4 μg m⁻³ and limonene, 13.4 μg m⁻³) were the compounds with higher median concentrations. The indoor/outdoor (I/O) ratios demonstrated that sources in the indoor environment are prevailing for most of the investigated VOCs especially for limonene, α-pinene, hexanal, formaldehyde, pentanal, acetaldehyde, o-xylene, n-dodecane and acetone with I/O ratio >6. Multiple linear regressions were applied to investigate the indoor VOC determinants and Spearman correlation coefficients were used to establish common sources between VOCs. Finally, the lifetime cancer risk associated to formaldehyde, acetaldehyde and benzene exposure was estimated and they varied from 7.8 × 10⁻⁵ to 4.1 × 10⁻⁴ for formaldehyde, from 8.6 × 10⁻⁶ to 3.5 × 10⁻⁵ for acetaldehyde and from 2.0 × 10⁻⁶ to 1.5 × 10⁻⁵ for benzene. For formaldehyde, the attributed risk in most sampled homes was two orders of magnitude higher than the one (10⁻⁶) proposed as acceptable by risk management bodies.     

Heterocyclic aromatic amines in grilled beef: The influence of free amino acids,nitrogenous bases,nucleosides, protein and glucose on HAAs content

The aim of the study was to determine the content and profile of heterocyclic aromatic amines (HAAs) formed during the process of grilling beef under various conditions and involving different cuts of beef meat. 4,8-DiMeIQx was the most prevalent (4.50–7.55 ng g⁻¹) the next were: MeIQx (1.10–7.20 ng g⁻¹), MeIQ (1.70–5.30 ng g⁻¹), and IQ (0.38 2.00 ng g⁻¹). Changes in HAAs content, depending on the chemical composition of beef meat, were investigated; the compounds under analysis included free amino acids, glucose and protein as well as free nitrogenous bases and their nucleosides. It was demonstrated that HAAs formation strongly correlates with the presence of various amino acids in raw beef as well as that of glucose and protein (correlation coefficient 0.84–0.93). It was also demonstrated that free purine bases, pyrimidine bases and their nucleosides, which had never previously been studied in terms of their role as substrates for HAAs synthesis, correlate very strongly with HAA formation in grilled beef (correlation coefficient 0.78–0.99). The influence of thermal processing at high temperatures on the thermal decomposition of aminoimidazoazaarenes has not been corroborated by the present study.     

Synthesis and characterization of functionalized silica with 3,6-ditia-1,8-octanediol for the preconcentration and determination of lead in milk employing multicommuted flow system coupled to FAAS

Novel functionalized silica, containing 3,6-dithia-1,8-octanediol (Si-DIO), was synthesized and characterized by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscope (SEM) and nuclear magnetic resonance (NMR) of ¹³C and ²⁹Si. The Si-DIO was used to pre-concentrate and determine the amount of Pb(II) in milk samples employing a multicommuted flow system coupled to flame atomic absorption spectrometry (FAAS). For the adsorption process, a pre-concentration minicolumn with 100 mg of Si-DIO, a solution of 0.005 mg L⁻¹ Pb(II) at pH 9.0 and HNO₃ as the eluent was used, obtaining an enrichment factor of 28 times with retention efficiency higher than 99%. The Pb(II) ion, using the multicommuted flow system coupled to FAAS, showed a linear response between 0.005 and 20.0 mg L⁻¹; a linear coefficient where r = 0.9939 and n = 7; a detection limit estimated at 0.001 mg L⁻¹ and a relative standard deviation of 3.8% (n = 50). Fifty pre-concentrations runs were tested in the minicolumn without significant variation in the analytical signal. The proposal system showed analytical applicability to determine Pb(II) ion in milk samples, presenting recovery of 90.7–102.5%.     

A rapid and sensitive method for the determination of dibutyl phthalate in wine by flow-injection chemiluminescence analysis

A sensitive method for the determination of picogram level dibutyl phthalate (DBP) in wine by flow-injection chemiluminescence (FI–CL) analysis is presented for the first time, which was based on the quenching effect of DBP on the luminol–myoglobin (Mb) CL system. The decrement of CL intensity was linearly proportional to the logarithm of DBP concentration in the range of 0.1–100 pg mL⁻¹ with the detection limit of 0.03 pg mL⁻¹ (3σ). At a flow rate of 2.0 mL min⁻¹, a complete determination of DBP including sampling and washing could be accomplished in 0.5 min, giving the maximum sample throughput of 120 h⁻¹. The proposed method was successfully applied to the determination of DBP in wine, human serum and urine samples with the relative standard deviations (RSDs) of less than 3.0% (n = 5). The molecule docking results showed that DBP interacted with the amino acid residues near the heme moiety of Mb. The possible CL mechanism of luminol–Mb–DBP reaction should be that the binding of Mb with DBP forming a 1:1 complex (binding constant K = 1.55 × 10⁴ L mol⁻¹) led to the conformational change of Mb and resulted in the quenching of CL intensity.     

Comparison of the chemical composition of British and Continental European bottled waters by multivariate analysis

The elemental composition of 37 bottled waters from the UK and continental Europe has been determined. Ca, K, Mg, Na, Al, As, Ba, Cd, Cr, Co, Cu, Fe, Mn, Mo, Ni, Pb, Sb, Sr, U, V and Zn were determined by ICP-OES and ICP-MS, in addition to inorganic and total organic carbon. The composition of all the waters analysed fell within the guideline values recommended by the World Health Organization. Na, Ca, Sr and Ba showed the widest variation in concentrations, ranging over two orders of magnitude. Levels of Fe were below the limit of detection (30 μg L⁻¹) in all samples analysed. Waters produced in the UK generally showed lower levels of most major elements and trace metals, with the exception of Ba (up to 455 μg L⁻¹). Italian waters showed the highest concentrations of Sr (3000–8000 μg L⁻¹) and U (8–13 μg L⁻¹), whereas waters produced in Slovakia and the Czech Republic showed the highest levels of Pb (0.7–4 μg L⁻¹). The use of multivariate analysis reveals an association between high alkaline metal content and high concentrations of As and Cr. There also appears to be a correlation between high Ca and Sr content and high levels of U. Analysis of variance (ANOVA) indicates that the composition of bottled water can be distinguished primarily by the country of origin, over other factors including the geological environment of the source. This would suggest that composition reflects, and is biased towards, consumer preferences.     

Major and trace elements levels in multifloral and unifloral honeys in Croatia

Different honey types were collected in Croatia during 2010 and 2011: 7 multifloral orchard honeys, 7 multifloral meadow honeys, 19 black locust, 9 chestnut, 11 lime and 6 sage honeys. Elements were measured using graphite (As, Cu, Cd, Pb, Se) and flame atomic absorption spectrometer (Ca, Fe, K, Mg, Na, Zn) and by mercury analyser (Hg). Significant differences in Ca, Fe, K, Mg, Zn, As and Hg levels were observed between honey types. In chestnut honey were determined (K, Ca, Mg: mg kg⁻¹; Hg, Ad, Cd: μg kg⁻¹): the highest concentrations of K 2824.4, Ca 486.7, Mg 59.1 and Hg 2.52; the lowest of As 24.1 and Cd 2.52. Lime honey has been shown the highest content of Cu (20.6 mg kg⁻¹), Zn (6.78 mg kg⁻¹), Cd (2.14 μg kg⁻¹) and Pb (810.3 μg kg⁻¹). The lowest levels of following elements were determined in black locust honey (Fe, K, Mg: mg kg⁻¹; Hg: μg kg⁻¹): Fe 2.77, K 304.7, Mg 8.02 and Hg 0.82. Sage honey had the lowest Ca and Na content (173.9 and 31.8 mg kg⁻¹). Among the multifloral honeys, the following was determined (Fe, Na, Cu: mg kg⁻¹; As, Pb: μg kg⁻¹): orchard honey – highest of Fe 5.17 and As 276.1, lowest Pb 301; meadow honey – highest Na 36.1, lowest Cu 4.38. The average Ca, Cu and Pb levels found in multifloral honey types were much higher than those reported in other European countries. Calcium levels in lime, chestnut and black locust were higher than those from other countries.