pH-Responsive hyperbranched polypeptides based on Schiff bases as drug carriers for reducing toxicity of chemotherapy

Polymeric micelles have great potential in drug delivery systems because of their multifunctional adjustability, excellent stability, and biocompatibility. To further increase the drug loading efficiency and controlled release ability, a pH-responsive hyperbranched copolymer methoxy poly(ethylene glycol)-b-polyethyleneimine-poly(Nε-Cbz-l-lysine) (MPEG-PEI-PBLL) was synthesized successfully. MPEG-PEI-NH₂ was synthesized to initiate the ring-opening polymerization of benzyloxycarbonyl substituted lysine N-carboxyanhydride (Z-lys NCA). The introduction of Schiff bases in the polymer make it possible to respond to the variation of pH values, which cleaved at pH 5.0 while stable at pH 7.4. As the polymer was amphiphilic, MPEG-PEI-PBLL could self-assemble into micelles. Owing to the introduction of PEI, which make the copolymer hyperbranched, the pH-responsive micelles could efficiently encapsulate theranostic agents, such as doxorubicin (DOX) for chemotherapy and NIRF dye DiD for in vivo near-infrared (NIR) imaging. The drug delivery system prolonged the drug circulation time in blood and allowed the drug accumulate effectively at the tumor site. Following the guidance, the DOX was applied in chemotherapy to achieve cancer therapeutic efficiency. All the results demonstrate that the polymer micelles have great potential for cancer theranostics.

Polymeric micelles have great potential in drug delivery systems because of their multifunctional adjustability, excellent stability, and biocompatibility.     

PEG-oligocholic acid telodendrimer micelles for the targeted delivery of doxorubicin to B-cell lymphoma

Doxorubicin (DOX) is one of most common anti-cancer chemotherapeutic drugs, but its clinical use is associated with dose-limiting cardiotoxicity. We have recently developed a series of PEG-oligocholic acid based telodendrimers, which can efficiently encapsulate hydrophobic drugs and self-assemble to form stable micelles in aqueous condition. In the present study, two representative telodendrimers (PEG^5k-CA₈ and PEG^2k-CA₄) have been applied to prepare DOX micellar formulations for the targeted delivery of DOX to lymphoma. PEG^2k-CA₄ micelles, compared to PEG^5k-CA₈ micelles, were found to have higher DOX loading capacity (14.8% vs. 8.2%, w/w), superior stability in physiological condition, and more sustained release profile. Both of these DOX-loaded micelles can be efficiently internalized and release the drug in Raji lymphoma cells. DOX-loaded micelles were found to exhibit similar in vitro cytotoxic activities against both T- and B-lymphoma cells as the free DOX. The maximum tolerated dose (MTD) of DOX-loaded PEG^2k-CA₄ micelles in mice was approximately 15 mg/kg, which was 1.5-fold higher of the MTD of free DOX. Pharmacokinetics and biodistribution studies demonstrated that both DOX-loaded micelles were able to prolong the blood retention time, preferentially accumulate and penetrate in B-cell lymphomas via the enhanced permeability and retention (EPR) effect. Finally, DOX-PEG^2k-CA₄ micelles achieved enhanced anti-cancer efficacy and prolonged survival in Raji lymphoma bearing mice, compared to free DOX and PEGylated liposomal DOX (Doxil®) at the equivalent dose. In addition, the analysis of creatine kinase (CK) and lactate dehydrogenase (LDH) serum enzymes level indicated that DOX micellar formulations significantly reduced the cardiotoxicity associated with free DOX.     

In vitro and in vivo evaluation of a novel mitomycin nanomicelle delivery system

Mitomycin C (MMC), naturally synthesized by Streptomyces caespitosus, is a potent antineoplastic antibiotic for the treatment of various solid tumors. However, the defects of conventional MMC injections have greatly limited its clinical application due to its toxic side effects and non-specific interactions. To solve this problem, the PEG_2k-Fmoc-Ibuprofen (PEG-FIbu) micellar nanocarrier was synthesized and the MMC-loaded micelles (PEG-FIbu/MMC) were prepared by thin film hydration method and characterized. Ibuprofen was used as a hydrophobic domain of PEG-FIbu nanocarrier, and we expect it to synergize with codelivered MMC in the overall antitumor activity. The in vitro release of PEG-FIbu/MMC was examined by dialysis method using MMC injection as a control. Our data suggested that PEG-FIbu/MMC micelles presented appropriate particle size, low CMC value, good stability, high drug loading efficiency and sustained release properties. In vitro cytotoxicity studies with several tumor cell lines showed that the carrier was effective in mediating intracellular delivery of MMC to tumor cells. In vivo pharmacokinetics, tissue distribution and therapeutic study proved that PEG-FIbu/MMC micelles prolonged blood circulation, significantly improved the tumor accumulation and therapeutic efficacy, and reduced undesirable side effect on normal tissues compared to MMC injection. In general, PEG-FIbu/MMC micelles represented an effective strategy to improve the performance for the delivery of MMC and safety of medication.

The introduction of a micellar delivery system of MMC increase efficiency, reduce toxicity and enhance specific interactions in tumor.     

Evaluation of polyanion-coated biodegradable polymeric micelles as drug delivery vehicles

Polymeric micelles, as drug delivery vehicles, must achieve specific targeting and high stability in the body for efficient drug delivery. We recently reported the preparation of polyanion-coated biodegradable polymeric micelles by coating positively charged polymeric micelles consisting of poly(l-lysine)-block-poly(l-lactide) (PLys-b-PLLA) AB diblock copolymers with anionic hyaluronic acid (HA) by polyion complex (PIC) formation. The obtained HA-coated micelles showed significantly higher stability in aqueous solution. In this study, to evaluate the HA-coated polymeric micelles as a drug carrier, model drug release from the micelles and cytotoxicity of the micelles were investigated. The HA-coated micelles showed sustained release of model drugs and low cytotoxicity. It is known that there are receptors for HA on liver sinusoidal endothelial cells (LSEC). Specific interactions of HA-coated micelles with LSECs and Kupffer cells were investigated and compared with polymeric micelles coated with other polyanionic polysaccharides, i.e., heparin (Hep) and carboxymethyl-dextran (CMDex). Although Hep-coated micelles and CMDex-coated micelles were incorporated into both Kupffer cells and LSECs, HA-coated micelles were taken up only into LSECs. These results suggest HA-coated micelles have potential utility as drug delivery vehicles exhibiting specific accumulation into LSECs.     

Micelles of methoxy poly(ethylene oxide)-b-poly(epsilon-caprolactone) as vehicles for the solubilization and controlled delivery of cyclosporine A.

The commercial formulation of Cyclosporine A (CsA) for intravenous administration contains Cremophor EL, a low molecular weight surfactant known to be toxic. In this study, micelles of methoxy poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) were investigated as alternative vehicles for the solubilization and delivery of CsA. PEO-b-PCL block copolymers having identical PEO chain lengths and PCL molecular weights of 5000, 13,000, or 24,000 g mol(-)(1) were synthesized and assembled into polymeric micelles using a co-solvent evaporation method. PEO-b-PCL micelles were then compared to Cremophor EL micelles for their functional properties in drug delivery including micellar size, thermodynamic stability, core viscosity, CsA encapsulation, and in vitro CsA release. Among different PCL block lengths, optimum solubilization was achieved by utilizing polymeric micelles having a PCL block of 13,000 g mol(-)(1). CsA reached an aqueous solubility of 1.3 mg/mL in the presence of PEO-b-PCL micelles. This concentration is comparable to injectable CsA levels in its Cremophor EL formulation (0.5-2.5 mg/mL). In contrast to the Cremophor EL formulation, the in vitro rate of CsA release was significantly sustained by the polymeric micellar carrier. Within 12 h, only 5.8% of CsA was released from polymeric micelles while Cremophor EL micelles released 77% of their drug content. Accordingly, viscosity of the PEO-b-PCL micellar core was found to be significantly higher than Cremophor EL micelles. The results points to a potential for PEO-b-PCL micelles as nanoscopic drug carriers for efficient solubilization and controlled delivery of CsA.     

Lipid-derivatized poly(ethylene glycol) micellar formulations of benzoporphyrin derivatives.

In this paper, we describe the development of micellar formulations for increasing the solubility of lipophilic benzoporphyrins. Using a simple procedure that is readily adaptable for large-scale manufacturing, both A-ring (1) and B-ring isomers (2) of benzoporphyrins could be readily formulated, at concentrations up to 1-2 mg/ml, into small micelles (<20 nm in diameter) of methoxypoly(ethylene glycol) (M(r) 2000) covalently attached to the lipid anchor distearoylphosphatidylethanolamine (mPEG-DSPE). The formulations spontaneously formed upon hydration of a thin film containing mPEG-lipid and photosensitizer and were stable upon storage at 4 degrees C for at least 1 month. Self-association of the B-ring benzoporphyrin isomer in micelles could be efficiently inhibited by either increasing the molar ratio of mPEG(2000)-DSPE to benzoporphyrin or by increasing the pH of the preparation to pH 8.5. The formulation could be freeze-dried and stored indefinitely in the lyophilized form, with restoration of the original properties upon reconstitution. In vivo, the A-ring benzoporphyrin, verteporfin, had higher levels of delivery and greater tumor control in mice than the B-ring derivative when formulated in mPEG(2000)-DSPE micelles and administered intravenously. mPEG(2000)-DSPE micellar formulations also showed tumor control when administered by a single intratumoral injection followed by light irradiation to the tumor within 45-60 min after drug administration. PEG-containing micellar formulations may be a promising delivery system for benzoporphyrin monoesters for clinical applications.     

PEGylated ethyl cellulose micelles as a nanocarrier for drug delivery

Natural polymers provide a better alternative to synthetic polymers in the domain of drug delivery systems (DDSs) because of their renewability, biocompatibility, and low immunogenicity; therefore, they are being studied for the development of bulk/nanoformulations. Likewise, current methods for engineering natural polymers into micelles are in their infancy, and in-depth studies are required using natural polymers as controlled DDSs. Accordingly, in our present study, a new micellar DDS was synthesized using ethyl cellulose (EC) grafted with polyethylene glycol (PEG); it was characterized, its properties, cell toxicity, and hemocompatibility were evaluated, and its drug release kinetics were demonstrated using doxorubicin (DOX) as a model drug. Briefly, EC was grafted with PEG to form the amphiphilic copolymers EC-PEG1 and EC-PEG2 with varying PEG concentrations, and nano-micelles were prepared with and without the drug (DOX) via a dialysis method; the critical micelle concentrations (CMCs) were recorded to be 0.03 mg mL⁻¹ and 0.00193 mg mL⁻¹ for EC-PEG1 and EC-PEG2, respectively. The physicochemical properties of the respective nano-micelles were evaluated via various characterization techniques. The morphologies of the nano-micelles were analyzed via transmission electron microscopy (TEM), and the average size of the nano-micelles was recorded to be ∼80 nm. In vitro, drug release studies were done for 48 h, where 100% DOX release was recorded at pH 5.5 and 52% DOX release was recorded at pH 7.4 from the micelles. In addition, cytotoxicity studies suggested that DOX-loaded micelles were potent in killing MDA-MB-231 and MCF-7 cancer cells, and the blank micelles were non-toxic toward cancerous and normal cells. A cellular uptake study via fluorescence microscopy indicated the internalization of DOX-loaded micelles by cancer cells, delivering the DOX into the cellular compartments. Based on these studies, we concluded that the developed material should be studied further via in vivo studies to understand its potential as a controlled DDS to treat cancer.

Ethyl cellulose was developed as an amphiphilic polymer by PEGylation and fabricated as nanomicelles for delivery of active molecules. This polymeric system can be used as next generation nano drug delivery system (nanoDDS) for cancer therapy.     

Engineering of amphiphilic block copolymers for polymeric micellar drug and gene delivery

The use of nano-delivery systems formed through assembly of synthetic amphiphilic block copolymers (ABCs) in experimental medicine and pharmaceutical sciences is experiencing rapid development. This rapid development is driven by a crucial need in improving the performance of existing therapeutic agents, as well as the necessity for the development of advanced delivery systems for complex new entities such as genes, proteins and other cellular components. The flexibility in the construction of appropriate carriers for the delivery requirements of these complex new “drugs” offered by versatile polymer chemistry provides an undeniable advantage for polymer based nano-delivery systems compared to other colloids in this regard. With seven formulations already in different stages of clinical trials, polymeric micelles are in the front line of drug development among different ABC-based nano-carriers. The success in rapid advancement of polymeric micelles from bench to bedside is owed to the rational engineering of core/shell structure so that the polymeric micellar carrier can meet the requirements for optimum delivery of specific drug(s) in certain disease condition(s). The engineering efforts in this regard have mostly been aimed at providing efficient drug loading, micellar stabilization, and sustained and/or site specific drug release. The objective of this review is to provide an update on different engineering strategies employed to achieve optimum polymeric micellar formulations.     

Prolonged circulation and in vivo efficacy of recombinant human granulocyte colony-stimulating factor encapsulated in polymeric micelles

To improve the pharmacokinetics of granulocyte colony-stimulating factor (G-CSF) and decrease dosing frequency, polyethylene glycol polyglutamate block copolymers were used as delivery carriers. The block copolymers are partially substituted with hydrophobic octyl or benzyl groups to form a micellar structure in aqueous media and encapsulate the protein. G-CSF is encapsulated in the polymeric micelles with a diameter of 60-70 nm. The present study was designed to evaluate the plasma pharmacokinetics, G-CSF release and in vivo efficacy of G-CSF-encapsulating micelles. Pharmacokinetic studies in rats showed highly enhanced plasma retention of the micelles compared with native G-CSF. The AUC (area under the curve) of the octyl-based polymer formulation showed a 5-fold increase, compared with native G-CSF. Size-exclusion chromatography of the blood from rats injected with the micelles demonstrated the release of G-CSF from the micelles in the blood circulation. The pharmacokinetic behavior supports the in vivo studies showing that the micelles display a comparable efficacy to PEGylated G-CSF. Simultaneous pharmacokinetic analysis of released and encapsulated G-CSF plasma levels showed that the G-CSF release occurs with the first-order kinetics and the half-life is 4.8 h. In conclusion, G-CSF is endowed by the polymeric micelles with prolonged half-life and increased efficacy without any chemical modification.     

Spermine modified polymeric micelles with pH-sensitive drug release for targeted and enhanced antitumor therapy

Tumor targeting delivery of chemotherapeutic drugs by nanocarriers has been demonstrated to be a promising strategy for cancer therapy with improved therapeutic efficacy. In this work, we reported a novel type of active targeting micelle with pH-responsive drug release by using biodegradable poly(lactide)-poly(2-ethyl-2-oxazoline) di-block copolymers functionalized with spermine (SPM). SPM has been considered as a tumor binding ligand through its specific interaction with the polyamine transport system (PTS), a transmembrane protein overexpressed on various types of cancer cell, while its application in nano-drug delivery systems has rarely been explored. The micelles with spherical shape (∼110 nm) could load hydrophobic paclitaxel (PTX) with high capacity, and release the payload much faster at acidic pH (4.5–6.5) than at pH 7.4. This pH-responsive property assisted the rapid escape of drug from the endo/lysosome after internalization as demonstrated by confocal laser scanning microscopy images using coumarin-6 (Cou-6) as a fluorescent probe. With surface SPM modification, the micelles displayed much higher cellular uptake than SPM lacking micelles in various types of cancer cells, demonstrating tumor targeting ability. The uptake mechanism of SPM modified micelles was explored by flow cytometry, which suggested an energy-consuming sag vesicle-mediated endocytosis pathway. As expected, the micelles displayed significantly enhanced anti-cancer activity. This work demonstrates that SPM modified pH-sensitive micelles may be potential drug delivery vehicles for targeting and effective cancer therapy.

Tumor targeting delivery of SPM functionalized micelles via PTS binding and their endocytosis and pH-triggered endo/lysosome drug release for anti-cancer therapy.     

Nano-sized drug-loaded micelles deliver payload to lymph node immune cells and prolong allograft survival

By delivering immunomodulatory drugs in vivo directly to lymph nodes draining an injection site, an opportunity exists to increase drug bioavailability to local immune cells. Importantly, particles smaller than 100 nm are efficiently transported through lymphatic vessels to draining lymph nodes. To investigate whether this approach could be used for local delivery of immunomodulatory drugs, amphiphilic poly(ethylene glycol)-bl-poly(propylene sulfide) (PEG-bl-PPS) block copolymers forming 50 nm micelles were used to encapsulate hydrophobic drugs. Micelle drainage was determined using fluorescent micelles and showed effective targeting of multiple immune cell subsets in lymph nodes. For functional studies of our formulations, two approaches were considered. To evaluate the efficacy of anti-inflammatory drug delivery, dendritic cell activation was shown to be prevented when mice were pretreated with micelles loaded with the glucocorticoid mometasone and then challenged with the TLR9 ligand, CpG. To evaluate whether immunosuppressive drug-loaded micelles were effective in prolonging MHC-mismatched allograft survival, BALB/c mice were treated for 14 consecutive days with drug-loaded micelles following transplantation of allogenic C57BL/6 tail skin. Micelles loaded with a mixture of rapamycin and tacrolimus prolonged allograft survival by 2-fold. Our results indicate that the drug-loaded micelle approach effectively targets the draining lymph nodes and exhibits proper immune regulation.     

Functionalized micelles from block copolymer of polyphosphoester and poly(-caprolactone) for receptor-mediated drug delivery

Cellular specific micellar systems from functional amphiphilic block copolymers are attractive for targeted intracellular drug delivery. In this study, we developed reactive micelles based on diblock copolymer of poly(ethyl ethylene phosphate) and poly(-caprolactone). The micelles were further surface conjugated with galactosamine to target asialoglycoprotein receptor (ASGP-R) of HepG2 cells. The size of micellar nanoparticles was about 70nm in diameter, and nanoparticles were negatively charged in aqueous solution. Through recognition between galactose ligands with ASGP-R of HepG2 cells, cell surface binding and internalization of galactosamine-conjugated micelles were significantly promoted, which were demonstrated by flow cytometric analyses using rhodamine 123 fluorescent dye. Paclitaxel-loaded micelles with galactose ligands exhibited comparable activity to free paclitaxel in inhibiting HepG2 cell proliferation, in contrast to the poor inhibition activity of micelles without galactose ligands particularly at lower paclitaxel doses. In addition, population of HepG2 cells arrested in G2/M phase was in positive response to paclitaxel dose when cells were incubated with paclitaxel-loaded micelles with galactosamine conjugation, which was against the performance of micelles without galactose ligand, owing to the ligand–receptor interaction. The surface functionalized micellar system is promising for specific anticancer drug transportation and intracellular drug release.     

A reduction-responsive drug delivery with improved stability: disulfide crosslinked micelles of small amiphiphilic molecules

Micelles self-assembled from small amphiphilic molecules are unstable in biological fluids, and thus are poor drug carriers. In contrast, amphiphilic polymer micelles can encapsulate hydrophobic drugs in their core to greatly enhance their aqueous solubility and extend their retention time in blood circulation owing to their hydrophilic shell. However, the major disadvantages of conventional polymer micelles are the heterogeneity of the amphiphilic polymer structure and premature drug leakage. Thus, herein, to address these shortcomings, disulfide crosslinked micelles composed of a small amphiphilic molecule, di-lipoyl-glycerophosphorylcholine (di-LA-PC), were developed as redox-responsive drug carriers. Specifically, di-LA-PC was synthesized and self-assembled to form crosslinked micelles under catalysis by dithiothreitol. The disulfide crosslinked micelles maintained high stability in a simulated physiological environment, but rapidly disassembled under reductive conditions. Furthermore, paclitaxel (PTX), as a model drug, was encapsulated in the core of the crosslinked micelles with a high loading content of 8.13%. The in vitro release studies indicated that over 80% of PTX was released from the micelles in the reductive environment, whereas less than 20% PTX was released without reduction in the 68 h test. Benefiting from their nanoscale characteristics, the PTX-loaded micelles showed efficient cellular internalization and effectively induced the death of cancer cells, as revealed in the MTT, apoptosis and cell cycle tests. Moreover, pharmacokinetic studies demonstrated that the crosslinked micelles prolonged the circulation of the incorporated PTX in the bloodstream and increased its accumulation in the tumor tissue via the EPR effect. Finally, the PTX-loaded micelles displayed prominent in vivo anti-tumor activity in a 4T1 xenograft tumor model. In summary, the di-LA-PC crosslinked micelle platform possesses excellent stability, high loading capacity and reduction-responsive release profile, which may have applications in the delivery of PTX and other anti-cancer drugs.

Reduction-responsive crosslinked di-LA-PC micelles from amphiphilic bis-LA-PC conjugate for PTX loading and GSH-triggered release of PTX.     

Prodrug and nanomedicine approaches for the delivery of the camptothecin analogue SN38

SN38 (7-ethyl-10-hydroxy camptothecin) is a prominent and efficacious anticancer agent. It is poorly soluble in both water and pharmaceutically approved solvents; therefore, the direct formulation of SN38 in solution form is limited. Currently, the water soluble prodrug of SN38, irinotecan (CPT-11), is formulated as a low pH solution and is approved for chemotherapy. However, CPT-11, along with most other water-soluble prodrugs shows unpredictable inter-patient conversion to SN38 in vivo, instability in the physiological environment and variable dose-related toxicities. More recently, macromolecular prodrugs (i.e. EZN-2208, IMMU-130) and nanomedicine formulations (i.e. nanoemulsions, polymeric micelles, lipid nanocapsule/nanoparticle, and liposomes) of SN38 have been investigated for improved delivery to cancer cells and tissues. Specifically, these carriers can take advantage of the EPR effect to direct drug preferentially to tumour tissues, thereby substantially improving efficacy and minimising side effects. Furthermore, oral delivery has been shown to be possible in preclinical results using nanomedicine formulations (i.e. dendrimers, lipid nanocapsules, polymeric micelles). This review summarizes the recent advances for the delivery of SN38 with a focus on macromolecular prodrugs and nanomedicines.     

Glycyrrhetinic acid modified and pH-sensitive mixed micelles improve the anticancer effect of curcumin in hepatoma carcinoma cells

Curcumin (CUR), a natural polyphenolic compound existing in plants, exhibits anticancer potential in inhibiting the growth of various types of human cancer. However, the poor aqueous solubility and low bioavailability limit its clinical applications. pH-sensitive macromolecule F68-acetal-PCL (FAP) and active targeting macromolecule F68-glycyrrhetinic acid (FGA) were designed to fabricate mixed micelles for efficient delivery of CUR. The thin film hydration method was used to prepare CUR loaded mixed (MIX/CUR) micelles. The drug loading rate (DL) of MIX/CUR micelles was 6.31 ± 0.92%, which remained stable for 15 days at 4 °C. The particle size and zeta potential of the MIX/CUR micelles were 91.06 ± 1.37 nm and −9.79 ± 0.47 mV, respectively. The MIX/CUR micelles exhibited pH sensitivity in a weak acid environment, and showed rapid particle size variation and drug release. In addition, in vitro tests demonstrated that MIX/CUR micelles induced higher cytotoxicity and apoptosis than free CUR, non-pH-sensitive F68-PCL (FBP)/CUR micelles and pH-sensitive FAP/CUR micelles in SMMC7721 and Hepa1-6 cells. Besides, mixed micelles were more effective than FBP and FAP micelles in a cell uptake experiment, which was medicated by a GA receptor. All in all, these results indicated that MIX/CUR micelles could be regarded as an ideal drug administration strategy against hepatoma carcinoma cells.

Curcumin (CUR), a natural polyphenolic compound existing in plants, exhibits anticancer potential in inhibiting the growth of various types of human cancer.     

Block copolymer micelles: preparation, characterization and application in drug delivery.

Block copolymer micelles are generally formed by the self-assembly of either amphiphilic or oppositely charged copolymers in aqueous medium. The hydrophilic and hydrophobic blocks form the corona and the core of the micelles, respectively. The presence of a nonionic water-soluble shell as well as the scale (10-100 nm) of polymeric micelles are expected to restrict their uptake by the mononuclear phagocyte system and allow for passive targeting of cancerous or inflamed tissues through the enhanced permeation and retention effect. Research in the field has been increasingly focused on achieving enhanced stability of the micellar assembly, prolonged circulation times and controlled release of the drug for optimal targeting. With that in mind, our group has developed a range of block copolymers for various applications, including amphiphilic micelles for passive targeting of chemotherapeutic agents and environment-sensitive micelles for the oral delivery of poorly bioavailable compounds. Here, we propose to review the innovations in block copolymer synthesis, polymeric micelle preparation and characterization, as well as the relevance of these developments to the field of biomedical research.     

PEGylated polylysine dendrimers increase lymphatic exposure to doxorubicin when compared to PEGylated liposomal and solution formulations of doxorubicin

Improved delivery of chemotherapeutic drugs to the lymphatic system has the potential to augment outcomes for cancer therapy by enhancing activity against lymph node metastases. Uptake of small molecule chemotherapeutics into the lymphatic system, however, is limited. Nano-sized drug carriers have the potential to promote access to the lymphatics, but to this point, this has not been examined in detail. The current study therefore evaluated the lymphatic exposure of doxorubicin after subcutaneous and intravenous administration as a simple solution formulation or when formulated as a doxorubicin loaded PEGylated poly-lysine dendrimer (hydrodynamic diameter 12 nm), a PEGylated liposome (100 nm) and various pluronic micellar formulations (~5 nm) to thoracic lymph duct cannulated rats. Plasma and lymph pharmacokinetics were analysed by compartmental pharmacokinetic modelling in S-ADAPT, and Berkeley Madonna software was used to predict the lymphatic exposure of doxorubicin over an extended period of time. The micelle formulations displayed poor in vivo stability, resulting in doxorubicin profiles that were similar to that observed after administration of the doxorubicin solution formulation. In contrast, the dendrimer formulation significantly increased the recovery of doxorubicin in the thoracic lymph after both intravenous and subcutaneous dosing when compared to the solution or micellar formulation. Dendrimer-doxorubicin also resulted in increases in lymphatic doxorubicin concentrations when compared to the liposome formulation, although liposomal doxorubicin did increase lymphatic transport when compared to the solution formulation. Specifically, the dendrimer formulation increased the recovery of doxorubicin in the lymph up to 30 h post dose by up to 685 fold and 3.7 fold when compared to the solution and liposomal formulations respectively. Using the compartmental model to predict lymphatic exposure to longer time periods suggested that doxorubicin exposure to the lymphatic system would ultimately be 9796 times and 6.1 times greater after administration of dendrimer doxorubicin when compared to the solution and liposome formulations respectively. The recovery of doxorubicin in the sentinel lymph nodes draining the subcutaneous injection site was also quantified directly, and consistent with the lymph pharmacokinetic data, lymph node recovery was greatest for the dendrimer formulation (12% of dosed doxorubicin/g node) when compared to the liposome (1.4%/g node) and solution (< 1%/g node) formulations. The data suggest that dendrimer-based drug delivery systems have the potential to enhance drug exposure to lymph-based drug targets such as lymphatic metastases.     

Core cross-linked block ionomer micelles as pH-responsive carriers for cis-diamminedichloroplatinum(II)

Benefits of the frequently prescribed platinum (II) chemotherapy drugs are compromised by undesirable side effects, poor pharmacokinetics and development of drug resistance. Polymer micelles derived from amphiphillic block copolymers, offer a novel macromolecular platform for carrier based delivery of such compounds. Soft polymeric nanocarriers were synthesized by template-assisted method involving condensation of the poly(ethylene oxide)-b-polymethacrylate anions by metal ions into core-shell block ionomer complex micelles followed by chemical cross-linking of the polyion chains in the micelle cores. The resulting micelles can efficiently incorporate cisplatin with a high loading capacity (up to 42% w/w). Core cross-linking stabilized the micelles against structural disintegration and prevented premature drug release. The reversible cisplatin entrapment involved the carboxylate groups of the micellar core. The drug was released in a pH-responsive manner, without loss of its biological activity. The stable cross-linked polymer micelles can potentially improve platinum (II) drug disposition with improved therapeutic potential.     

Preparation and characterization of size-controlled polymeric micelle containing cis-dichlorodiammineplatinum(II) in the core.

Polymeric micelles of varying size in the range of 20 to 100 nm entrapping an antitumor drug, cis-dichlorodiammineplatinum(II) (cisplatin, CDDP), were prepared through the polymer-metal complex formation of CDDP with a mixture of poly(ethylene glycol)-poly(alpha,beta-aspartic acid) block copolymer (PEG-P(Asp)) and poly(alpha,beta-aspartic acid) homopolymer (P(Asp)) with the different feed ratio in distilled water. An increased ratio of P(Asp) to PEG-P(Asp) led to an increase in the micellar size in a controllable manner as well as prolongation in the induction period of the micellar decay accompanied by a sustained release of CDDP in physiological saline at 37 degrees C. All of the CDDP-loaded micelles with a different incorporation ratio of P(Asp) exhibited appreciable in vitro cytotoxicity due to CDDP release from the micelles by prolonged incubation. These CDDP-loaded micelles are expected to have potential utility in tumor-directed delivery system of CDDP through the modulated in vivo biodisposition based on the EPR effect.     

Hydrotropic polymer micelles as versatile vehicles for delivery of poorly water-soluble drugs

Polymer micelles have been used widely for delivery of poorly water-soluble drugs. Such drug delivery, however, has been based primarily on hydrophobic interactions. For better drug loading and improved stability, hydrotropic polymer micelles were used. To develop a versatile polymer micelle for solubilizing various poorly soluble drugs, two different hydrotropic agents were examined. The solubilizing properties of two hydrotropic agents, N,N-diethylnicotinamide (DENA) and N,N-dimethylbenzamide (DMBA), in polymeric form were investigated for their ability to solubilize five drugs with low aqueous solubility covering a wide range of hydrophobicity and molecular structures. The hydrotropes were covalently linked to the hydrophobic block of a block copolymer that also had a hydrophilic poly(ethylene glycol) (PEG) block.The solubilizing capacity of the polymeric hydrotropes was compared with that of the non polymeric hydrotropes, as well as of two conventional (non hydrotropic) copolymer systems. The solubilizing capacity of polymeric hydrotropes reflects combined effects of the micellar solubilization by the hydrophobic micelle core and hydrotropic solubilization. Because of the highly localized configuration, hydrotropes in the polymeric form are more powerful solubilizers than in the monomeric (non-polymeric) solution. It is possible to produce 1 ~ 3 orders of magnitude increase in solubility with polymeric hydrotropes at the 1% (w/v) level. Of the two hydrotropic polymeric systems in this study, the DENA-based system is highly specific, whereas the DMBA-based system is a general solubilizer of hydrophobic drugs. An additional advantage of polymeric hydrotropes over the non-polymeric form is absence of high concentrations of free hydrotropes in the formulation. Solubilization vehicles based on polymeric hydrotropes are expected to provide a new and versatile means of preparing formulations for various poorly soluble drugs and drug candidates without using organic solvents. This advantage is accompanied with the inherent controlled release property of the hydrotropic polymer micelles, making them ideal for pharmaceutical formulations used in drug candidate screening and toxicology studies.