共查询到20条相似文献,搜索用时 31 毫秒
1.
Metronidazole and miconazole nitrate in ovules was determined by ratio spectra derivative spectrophotometry and by high-performance liquid chromatography (HPLC). The first method depends on ratio spectra first derivative spectrophotometry, by utilizing the linear relationship between substances concentration and ratio spectra first derivative peak amplitude. The ratio first derivative amplitudes at 242.6 [(1)DD(242.6)], 274.2 [(1)DD(274.2))] 261.8 [(1)DD(261.8))] 273.5 [(1)DD(273.5))]and 281.5 [(1)DD(281.5)] nm were selected for the assay of metronidazole and miconazole nitrate, respectively. The second method is based on high-performance liquid chromatography on a reversed-phase column using a mobile phase of methanol-water-phosphoric acid (30:70:0.20 v/v) (pH 2.8) with programmable detection at 220.0 nm. The minimum concentration detectable by HPLC was 0.9 microg ml(-1) for metronidazole and 0.3 microg ml(-1) for miconazole nitrate and by ratio derivative spectrophotometry 4.0 microg ml(-1) for metronidazole and 0.5 microg ml(-1) for miconazole nitrate. The proposed procedures were successfully applied to the simultaneous determination of metronidazole and miconazole nitrate in ovules with a high percentage of recovery, good accuracy and precision. 相似文献
2.
El-Gindy A Ashour A Abdel-Fattah L Shabana MM 《Journal of pharmaceutical and biomedical analysis》2001,25(2):299-307
Different spectrophotometric methods are presented for the simultaneous determination of benazepril hydrochloride and hydrochlorothiazide in pharmaceutical tablets. The first method depends on second derivative (2D) ultraviolet spectrophotometry, with zero crossing and peak to base measurement. The second derivative amplitudes at 214.8 and 227.4 nm were selected for the assay of benazepril hydrochloride and hydrochlorothiazide, respectively. The second method depends on second derivative of the ratio spectra by measurement of the amplitudes at 241.2 and 273.2 nm for benazepril hydrochloride and hydrochlorothiazide, respectively. Chemometric methods, classical least squares and principal component regression, were applied to analyze the mixture. Both the chemometric methods were applied to the zero and first order spectra of the mixture. The proposed methods were successfully applied for the determination of the two drugs in laboratory prepared mixtures and in commercial tablets. 相似文献
3.
Erk N 《Journal of pharmaceutical and biomedical analysis》2001,24(4):603-611
A new simple, precise, rapid and selective reversed-phase high performance liquid chromatographic (HPLC) and two spectrophotometric methods have been described for resolving binary mixture of losartan potassium and hydrochlorothiazide in the pharmaceutical formulations. The first method, is based on HPLC on a reversed-phase column using a mobile phase 0.01 N sodium dihydrogen phosphate:methanol:acetonitrile (8:2:1 v/v/v) (pH 5.5) with detection at 265.0 nm. The second method, is depend on ratio derivative spectrophotometry, the amplitudes in the first derivative of the ratio spectra at 238.360 nm and at 230.423 nm were selected to simultaneously determine losartan potassium and hydrochlorothiazide in the mixture. The third method, based on compensation technique is presented for the derivative spectrophotometric determination of binary mixtures with overlapping spectra. By using ratios of the derivative maxima or the derivative minimum, the exact compensation of either component in the mixture can be achieved, followed by its determination. The accuracy and precision of the methods have been determined and they have been validated by analysing synthetic mixtures containing losartan potassium and hydrochlorothiazide. The methods do not require any separation step. The methods were also applied to the determination of losartan potassium and hydrochlorothiazide in pharmaceutical preparations. The analytical results were quite good in all cases. 相似文献
4.
Simultaneous determination of valsartan and hydrochlorothiazide in tablets by first-derivative ultraviolet spectrophotometry and LC 总被引:1,自引:0,他引:1
Satana E Altinay S Göğer NG Ozkan SA Sentürk Z 《Journal of pharmaceutical and biomedical analysis》2001,25(5-6):1009-1013
First-derivative ultraviolet spectrophotometry and high-performance liquid chromatography (HPLC) were used to determine valsartan and hydrochlorothiazide simultaneously in combined pharmaceutical dosage forms. The derivative procedure was based on the linear relationship between the drug concentration and the first derivative amplitudes at 270.6 and 335 nm for valsartan and hydrochlorothiazide, respectively. The calibration graphs were linear in the range of 12.0–36.1 μg ml−1 for valsartan and 4.0–12.1 μg ml−1 for hydrochlorothiazide. Furthermore, a high- performance liquid chromatographic procedure with ultraviolet detection at 225 nm was developed for a comparison method. For the HPLC procedure, a reversed phase column with a mobile phase of 0.02 M phosphate buffer (pH 3.2)-acetonitrile (55: 45; v/v), was used to separate for valsartan and hydrochlorothiazide. The plot of peak area ratio of each drug to the internal standard versus the respective concentrations of valsartan and hydrochlorothiazide were found to be linear in the range of 0.06–1.8 and 0.07–0.5 μg ml−1, respectively. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and commercial tablets. 相似文献
5.
Erk N 《Journal of pharmaceutical and biomedical analysis》2002,28(2):391-397
Two-component mixtures of dorzolamide hydrochloride and timolol maleate were assayed by first derivative and ratio derivative spectrophotometric methods. The first method, derivative spectrophotometry, by the zero-crossing measurements, was used due to the drugs closely overlapping absorption spectra. Linear calibration graphs of first derivative values at 250.3 nm for dorzolamide hydrochloride and 315.8 nm for timolol maleate. The second method, is based on ratio first derivative spectrophotometry, the amplitudes in the first derivative of the ratio spectra at 242.9 and at 223.5 nm were selected to determine dorzolamide and timolol maleate in the binary mixture. Calibration graphs were established for 8.0-30.0 microg ml(-1) for dorzolamide hydrochloride and 3.0-24.6 microg ml(-1) for timolol maleate in binary mixture. Good linearity, precision and selectivity were found, and the proposed methods were applied successfully to the pharmaceutical dosage from containing the above-mentioned drug combination without any interference by the excipients. Vierordt's method was also developed for a comparison method. 相似文献
6.
Erk N 《Il Farmaco; edizione pratica》2003,58(12):1209-1216
Two rapid, simple and accurate first derivative spectrophotometry and HPLC method for the determination of nefazodone hydrochloride and sertraline hydrochloride in pharmaceutical formulations are discussed. The first one is a derivative spectrophotometric procedure and the second one is based on a HPLC method with a UV detector. In the first method, first derivative spectrophotometry, nefazodone hydrochloride or sertraline hydrochloride by measurement of their first derivative signals at 241.8-256.7 nm (peak-to-peak amplitude), or 271.6-275.5 nm (peak-to-peak amplitude), respectively. Calibration graphs were established for 10.0-42.0 microg ml(-1) nefazodone hydrochloride, or 8.0-46.0 microg ml(-1) sertraline hydrochloride. In the other method, HPLC, the UV detection was carried out at 265.0 nm (nefazodone hydrochloride) and 270.0 nm (sertraline hydrochloride). The samples were chromatographed on a Supercosil RP-18 column. The mobile phases were methanol:acetonitrile:phosphate buffer at pH 5.5 (10:50:40 v/v/v) (nefazodone hydrochloride) and methanol:phosphate buffer at pH 4.5 (20:80 v/v) (sertraline hydrochloride). The results obtained from first derivative spectrophotometric method were comparable with those obtained by using HPLC. It was concluded that both the developed methods are equally accurate, sensitive, and precision could be applied directly and easily to the pharmaceutical formulations of nefazodone hydrochloride and sertraline hydrochloride, respectively. 相似文献
7.
《Journal of pharmaceutical and biomedical analysis》1995,13(7):851-856
Two methods are described for the simultaneous determination of enalapril maleate and hydrochlorothiazide in combined pharmaceutical tablets. The first method depends on first-derivative ultraviolet spectrophotometry, with zero-crossing and peak-to-base measurement methods. The first-derivative amplitudes at 224 and 260 nm were selected for the assay of enalapril maleate and hydrochlorothiazide, respectively. The second method is based on high-performance liquid chromatography on a reversed-phase column using a mobile phase of acetonitrile-water (20:80, v/v) (pH 3.8) with programmable detection at 215 and 275 nm. Both methods showed good linearity, precision and reproducibility. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and in commercial tablets. 相似文献
8.
Simultaneous determination of fosinopril and hydrochlorothiazide in pharmaceutical formulations by spectrophotometric methods 总被引:2,自引:0,他引:2
Erk N 《Journal of pharmaceutical and biomedical analysis》2002,27(6):901-912
Three new spectrophotometric procedures for the simultaneous determination of fosinopril and hydrochlorothiazide are described. The first method, derivative-differential spectrophotometry, comprised of measurement of the difference absorptivities derivatized in the first-order (ΔD1) of a tablet extract in 0.1 N NaOH relative to that of an equimolar solution in methanol at wavelengths of 227.6 and 276.4 nm, respectively. The second method, depends on the application ratio spectra derivative spectrophotometric method to resolve the interferance due to spectral overlapping. The analytical signals were measured at 237.9, 243.8 nm for fosinopril and 262.4, 269.3 and 278.6 nm for hydrochlorothiazide in the binary mixture, in the first derivative of the ratio spectra of the mixture solutions in methanol. Calibration graphs were established for 4.0–50.0 μg ml−1 fosinopril and 2.0–14.0 μg ml−1 hydrochlorothiazide in binary mixture. The third method, absorbance ratio method, the determination of fosinopril and hydrochlorothiazide was performed by using the absorbances read at 210.0, 219.5 and 271.7 nm in the zero-order spectra of their mixture. The developed methods were compared with absorbance ratio method. Application of the suggested procedures were successfully applied to the determination of this compound in synthetic mixtures and in pharmaceutical preparations, with high percentage of recovery, good accuracy and precision. 相似文献
9.
Four chemometric techniques, classical least squares (CLS) and inverse least squares (ILS) and principal component regression (PCR) and partial least squares regression (PLSR) were applied to the absorption and derivative spectrophotometric determinations of amiloride and hydrochlorothiazide in a pharmaceutical preparation. Four chemometric calibrations for both zero-order and first derivative spectra were constructed by measuring the absorbance and their dA/dlambda values at 34 points in the wavelength range 205-395 nm for a training set containing 2-10 microg/ml amiloride and 4-28 microg/ml hydrochlorothiazide corresponding to 25 point mixture design. The building chemometric calibrations were confirmed by using the synthetic mixtures containing two drugs. The results obtained by the proposed techniques based on the use of the measurements at the absorption spectra and at the first derivative spectra were statistically compared with each other. 相似文献
10.
El-Gindy A Ashour A Abdel-Fattah L Shabana MM 《Journal of pharmaceutical and biomedical analysis》2001,25(5-6):923-931
Different spectrophotometric and HPTLC-densitometric methods are presented for the simultaneous determination of lisinopril and hydrochlorothiazide in pharmaceutical tablets. The spectrophotometric methods include third derivative (3D) ultraviolet spectrophotometry with zero crossing measurement at 217.4 and 233.4 nm, second derivative of the ratio spectra with measurement at 214.3 and 228.0 nm; both classical least squares and principal component regression were applied to the UV absorption and first derivative spectra of the mixture. The HPTLC method was based on separation of both drugs followed by densitometric measurements of their spots at 210 and 275 nm for lisinopril and hydrochlorothiazide, respectively. The separation was carried out on Merck HPTLC aluminum plates of silica gel 60 F254, using chloroform–ethylacetate–acetic acid (10:3:2 by vol.) as mobile phase. The linear and second order polynomial were used for the regression equation of lisinopril and hydrochlorothiazide, respectively. 相似文献
11.
《Il Farmaco; edizione pratica》1998,53(8-9):617-622
Rapid, precise, accurate and specific high performance liquid chromatographic and derivative ratio spectra spectrophotometry procedures are described for the simultaneous analysis of chlorpheniramine maleate and phenylephrine hydrochloride in combined pharmaceutical dosage forms. The chromatographic methods were standardised using a LiChrosorb RP- C18 column (5 μm , 20 cm × 4.6 mm), UV detection at 269.0 nm and mobile phases consisting of methanol/phosphate buffer (50 ml 0.2 M monobasic potassium phosphate (KH2PO4) + 34.7 ml 0.2 M NaOH; 70:30, apparent pH 7.2). Using derivative ratio spectra spectrophotometry, the amplitudes in the first derivative of the ratio spectra at 238.9 and 280.0 nm were selected to determine chlorpheniramine maleate and phenylephrine hydrochloride in the mixture. Commercial nasal drops and laboratory-prepared mixtures containing both drugs in different proportions were assayed using the methods developed. Both methods showed good linearity, precision and reproducibility. 相似文献
12.
Bebawy LI 《Journal of pharmaceutical and biomedical analysis》2002,27(5):737-746
Three methods are described for the simultaneous determination of dorzolamide hydrochloride (DORZ) and timolol maleate (TIM) in ophthalmic solutions. The first method is based on application of thin layer chromatographic separation of both drugs followed by the densitometric measurements of their spot areas. After separation on silica gel GF(254) plates, using methanol-ammonia 25% (100:1.5 v/v) as the mobile phase, the chromatographic zones corresponding to the spots were scanned at 253 and 297 nm, respectively. The calibration function was established in the ranges of 2-18 microg for DORZ and 0.5-4.5 microg for TIM. The second method depends on first derivative ultraviolet spectrophotometry, with zero-crossing measurement method. The first derivative values D(1) at 250.2 and 312.5 nm were selected for the assay of DORZ and TIM, respectively. Calibration graphs follow Beer's law in the range 10-64 and 2.5-16 microg ml(-1), respectively. The third method is based on ratio first derivative spectrophotometry. The signals in the first derivative of the ratio spectra at 244 and 306.2 nm were selected to determine DORZ and TIM in the mixture and calibration graphs are linear in the range of 5-40 and 5.0-17.5 microg ml(-1), respectively. The proposed methods were successfully applied to the determination of these compounds in synthetic mixtures and in pharmaceutical preparations. The proposed methods are simple, rapid and suitable for quality control application. 相似文献
13.
Comparison of spectrophotometric and an LC method for the determination perindopril and indapamide in pharmaceutical formulations. 总被引:1,自引:0,他引:1
N Erk 《Journal of pharmaceutical and biomedical analysis》2001,26(1):43-52
A new sensitive, simple, rapid and precise reversed-phase high performance liquid chromatographic (HPLC) and two spectrophotometric methods have been developed for resolving binary mixture of perindopril and indapamide in the pharmaceutical dosage forms. The first method is based on HPLC on a reversed-phase column using a mobile phase of phosphate buffer pH 2.4 and acetonitrile (7:3 v/v) was used. Linearity range for perindopril and indapamide was 5.0-70.0 and 8.0-35.0 microg ml(-1). In the second method, the first derivative spectrophotometry with a zero-crossing technique of measurement is used for the simultaneous quantitative determination of perindopril and indapamide in binary mixtures without previous separation step. Linear calibration graphs of first derivative values at 225.7 and 255.4 nm for perindopril and indapamide, respectively. The third method is based on ratio derivative spectrophotometry, the amplitudes in the first derivative of the ratio spectra at 226.5 and at 255.3 nm were selected to determine perindopril and indapamide in the binary mixture. All the proposed methods showed good linearity, precision and reproducibility. The proposed methods were successfully applied to the pharmaceutical dosage forms containing the above-mentioned drug combination without any interference by the excipients. 相似文献
14.
Erk N 《Die Pharmazie》2003,58(8):543-548
This work involves the simultaneous determination of hydrochlorothiazide and irbesartan in a binary mixture without previous separation by three new analytical methods. The first method, based on compensation technique, is presented for the derivative spectrophotometric determination of binary mixtures with overlapping spectra. By using ratios of the derivative maxima or the derivative minimum, the exact contribution of either component in the binary mixture can be measured and the amounts quantified. The second method uses of the first derivative of the ratio spectra. The ratio spectra were obtained by dividing the absorption spectra of the binary mixture by that of one of the components. The amplitudes in the first derivative of the ratio spectra at 231, 266, 279, 238 and 248 nm were selected to determine hydrochlorothiazide and irbesartan in binary mixtures. The concentration of the other components are then determined from their respective calibration graphs treated similarly. With the third method, the absorbance ratio method, the determination of hydrochlorothiazide and irbesartan was performed using the absorbances read at 272 nm, 241 nm and 263 nm in the zero-order spectra of their mixture. The absorbance ratio was also developed as a comparison method. The three methods are simple, accurate, rapid and require no preliminary separation steps and can, therefore, be used for routine analysis of both drugs in quality control laboratories. 相似文献
15.
Erk N 《Journal of pharmaceutical and biomedical analysis》2000,23(6):1023-1031
Three simple, rapid and accurate methods are described for the simultaneous determination of chlorpheniramine maleate and phenylephrine hydrochloride in two component mixtures. The first method comprised of measurement of difference absorptivities derivatized in first order of a nasal drops in 0.1 N NaOH relative to that of an equimolar solution in methanol at wavelengths of 271.6 and 250.2 nm, respectively. The second method, zero-crossing derivative spectrophotometry, is based on recording the first derivative curves and determining each component using the zero-crossing technique. Using first derivative spectrophotometry, the amplitudes in the first derivative spectra at 246.5 and 238.6 nm were selected to simultaneously determine chlorpheniramine maleate and phenylephrine hydrochloride in the mixture. The presence of identical zero-crossing points for pure drugs and nasal drop solutions established the non-interference of the excipients in the absorption at these wavelengths. Absorbance ratio method was also developed for a comparison method. The proposed procedures were successfully applied to the determination of chlorpheniramine maleate and phenylephrine hydrochloride in nasal drops, with a high percentage of recovery, good accuracy and precision. 相似文献
16.
Erk N 《Journal of pharmaceutical and biomedical analysis》1999,20(1-2):155-167
Procedures were developed for the simultaneous determination of pharmaceuticals in binary mixtures, containing hydrochlorothiazide-benazepril hydrochloride, hydrochlorothiazide triamterene and hydrochlorothiazide cilazapril by ratio spectra derivative spectrophotometry and Vierordt's method. Mean recoveries, relative standard deviations and linearity ranges in calibration graphs of the methods were compared. These procedures were successfully applied to three pharmaceutical formulations for the determination of active ingredients. 相似文献
17.
Four sensitive methods are described for the direct determination of telmisartan (TELM) and hydrochlorothiazide (HCT) in combined dosage forms without prior separation. The first method is a first derivative spectophotometry (1D) using a zero- crossing technique of measurement at 241.6 and 227.6 nm for TELM and HCT, respectively. The second method is the first derivative of ratio spectrophotometry (1DD) where the amplitudes were measured at 242.7 nm for TELM and 274.9 nm for HCT. The third method is based on TLC separation of the two drugs followed by the densitometric measurements of their spots at 295 and 225 nm for TELM and HCT, respectively. The separation was carried out on silica gel 60 F254 using butanol: ammonia 25% (8:2 v/v) as mobile phase. The fourth method is spectrofluorimetric determination of TELM, depending on measuring the native fluorescence of the drug in 1 M sodium hydroxide at lambda excitation 230 nm and emission at 365 nm. The proposed methods were applied successfully for the determination of the two drugs in bulk powder and in pharmaceutical formulations. The spectrofluorimetric method was utilized for the analysis of TELM in human plasma. 相似文献
18.
Determination of theophylline and ephedrine HCL in tablets by ratio-spectra derivative spectrophotometry and LC 总被引:1,自引:0,他引:1
Sentürk Z Erk N Ozkan SA Akay C Cevheroğlu S 《Journal of pharmaceutical and biomedical analysis》2002,29(1-2):291-298
Two methods are described for the determination of theophylline (THP) and ephedrine hydrochloride (EPH) in combined pharmaceutical tablet forms. The first method depends on the use of the first derivative of the ratio-spectra obtained by dividing the absorption spectrum of binary mixtures by a standard spectrum of one of the compounds. The first derivative amplitudes at 231.8 and 250.3 nm were selected for the assay of THP and EPH, respectively. Calibration graphs were established for 20-180 microg ml(-1) for THP and 10-50 microg ml(-1) for EPH. The second method is based on high-performance liquid chromatography on a reversed-phase column using a mobile phase of methanol-water (40+60,v/v) (pH 3) with detection at 217 nm. Linearity was obtained in the concentration range of 5-150 microg ml(-1) for THP and 15-75 microg ml(-1) for EPH. The detection limits for THP and EPH were 0.73 and 0.92 microg ml(-1) by ratio-spectra derivative spectrophotometry and 0.59 and 0.86 microg ml(-1) by HPLC, respectively. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and in tablets. The relative standard deviations were found to be less than 1.5%, indicating reasonable repeatibility of both methods. 相似文献
19.
El-Gindy A El-Zeany B Awad T Shabana MM 《Journal of pharmaceutical and biomedical analysis》2001,26(2):203-210
Two methods are presented for the simultaneous determination of trifluoperazine hydrochloride and isopropamide iodide in binary mixture. The first method depends on second derivative ((2)D) ultraviolet spectrophotometry, with zero crossing and peak to base measurement. The second derivative amplitudes at 270.4 and 230.2 nm were selected for the assay of trifluoperazine hydrochloride and isopropamide iodide, respectively. The second method depends on second derivative of the ratio spectra by division of the absorption spectrum of the binary mixture by a normalized spectrum of one of the components and then calculating the second derivative of the ratio spectrum. The second derivative of the ratio amplitudes at 257 and 228 nm were selected for the determination of trifluoperazine hydrochloride and isopropamide iodide, respectively. The two proposed methods were successfully applied to the determination of the two drugs in laboratory prepared mixtures and in commercial tablets. 相似文献
20.
Erk N 《Die Pharmazie》2003,58(11):796-800
Two-component mixtures of candesartan cilexetil (CAN) and hydrochlorothiazide (HYD) were assayed by first derivative and ratio derivative spectrophotometry. The first method depends on zero-crossing and peak to base measurement. The first derivative amplitudes at 270.1 and 255.5 nm were selected for the assay of (CAN) and (HYD), respectively. The second method depends on first derivative of the ratio spectra by division of the absorption spectrum of the binary mixture by a normalized spectrum of one of the components and then calculating the first derivative of the ratio spectrum. The first derivative of the ratio amplitudes at 236, 250, 232, 267 and 280 nm were selected for the determination of (CAN) and (HYD), respectively. Calibration curves were established for 6.0-38.0 microg x ml(-1) for (CAN) and 4.0-28.0 microg x ml(-1) for (HYD) in binary mixtures. Good linearity, precision and selectivity were found, and the two methods were successfully applied to the pharmaceutical dosage form containing the above-mentioned drug combination without any interference by the excipients. 相似文献