瘤内注射用阳离子型紫杉醇乳脂体的制备及体外性质评价

目的:制备适于瘤内给药的阳离子型紫杉醇乳脂体(PTX-CTAB-NES),并对其理化性质及细胞毒性进行评价。方法:采用溶剂蒸发法制备PTX-CTAB-NES,利用中心复合设计优化处方,透射电镜观察形态,纳米粒径仪测定粒径分布,XRD确证PTX在载体中的分散状态,HPLC法测定其包封率、载药量,透析法研究制剂的体外释药行为,并对其细胞毒性进行评价。结果:PTX-CTAB-NES呈类球形,可见明显指纹结构,平均粒径为94.0 nm,Zeta电位为+48.3 mV,包封率、载药量分别为98.0%和3.25%,PTX在载体中以非晶型状态存在。与Taxol注射液相比,阳离子型紫杉醇乳脂体具有明显的缓释作用,对MCF-7人乳腺癌细胞的IC50降低。结论:PTX-CTAB-NES正电性强,包封率高,缓慢释放药物,细胞毒性大,是瘤内原位给药的理想载体。     

Archaeosomes: an excellent carrier for drug and cell delivery

Archaeosomes as liposomes made with one or more ether lipids that are unique to the domain of Archaeobacteria, found in Archaea constitute a novel family of liposome. Achaean-type lipids consist of archaeol (diether) and/or caldarchaeol (tetraether) core structures. Archaeosomes can be produced using standard procedures (hydrated film submitted to sonication, extrusion and detergent dialysis) at any temperature in the physiological range or lower, therefore making it possible to encapsulate thermally stable compounds. Various physiological as well as environmental factors affect its stability. Archaeosomes are widely used as drug delivery systems for cancer vaccines, Chagas disease, proteins and peptides, gene delivery, antigen delivery and delivery of natural antioxidant compounds. In this review article, our major aim was to explore the applications of this new carrier system in pharmaceutical field.     

Preactivated thiomers: their role in drug delivery

Introduction: Since thiolated polymers – known as thiomers – have entered the pharmaceutical arena in the late 1990s, more and more academic and industrial research groups have started to work with these promising polymeric excipients. Meanwhile, various thiomers are the subject of clinical trials and the first product based on thiolated chitosan will reach the market in 2015. Due to the formation of disulfide bonds with mercaptopyridine substructures, thiol groups of thiomers are on the one hand more reactive and on the other hand are protected toward oxidation. These so-called preactivated thiomers representing the second generation of thiomers are subject of this review.

Areas covered: Within this review, preactivated thiomers are classified and their mode of action is described. Furthermore, different synthetic pathways, purification and chemical characterization methods of preactivated thiomers are explained. Their properties including mucoadhesive, permeation-enhancing, efflux pump inhibitory and in situ gelling properties are described. In addition, various formulations based on preactivated thiomers are introduced.

Expert opinion: The first-generation thiomers have already shown great potential resulting in various product developments. Preactivated thiomers – representing the second generation of thiomers – offer the additional advantage of even comparatively more reactive sulfhydryl ligands and of stability toward oxidation. According to this, they are promising novel polymeric excipients for various applications.     

Recent advances in the role of supramolecular hydrogels in drug delivery

Introduction: Supramolecular hydrogels, formed by noncovalent crosslinking of polymeric chains in water, constitute an interesting class of materials that can be developed specifically for drug delivery and biomedical applications. The biocompatibility, stimuli responsiveness to various external factors, and powerful functionalization capacity of these polymeric networks make them attractive candidates for novel advanced dosage form design.

Areas covered: This review summarizes the significance of supramolecular hydrogels in various biomedical and drug delivery applications. The recent advancement of these hydrogels as potential advanced drug delivery systems (for gene, protein, anticancer and other drugs) is discussed. The importance of these hydrogels in biomedical applications, particularly in tissue engineering, biosensing, cell-culture research and wound treatment is briefly described.

Expert opinion: The use of supramolecular hydrogels in drug delivery is still in very early stages. However, the potential of such a system is undeniably important and very promising. A number of recent studies have been conducted, which mainly focus on the use of cyclodextrin-based host–guest complex as well as other supramolecular motifs to form supramolecular hydrogels for delivery of various classes of drugs, therapeutic agents, proteins and genes. However, there are still plenty of opportunities for further development in this area for drug delivery and other biomedical applications.     

Transdermal delivery of highly lipophilic drugs: in vitro fluxes of antiestrogens,permeation enhancers,and solvents from liquid formulations

Purpose. Highly lipophilic basic drugs, the antiestrogens AE 1 (log P = 5.82) and AE 2 (log P = 7.8) shall be delivered transdermally. Methods. Transdermal permeation of drugs, enhancers, and solvents from various fluid formulations were characterized by in-vitro permeation studies through excised skin of hairless mice. Furthermore, differential scanning calorimetry (DSC) measurements of skin lipid phase transition temperatures were conducted. Results. Transdermal flux of highly lipophilic drugs was extraordinarily enhanced by the unique permeation enhancer combination propylene glycol-lauric acid (9 + 1): steady-state fluxes of AE 1 and AE 2 were as high as 5.8 g·cm^–2·h^–1 and 3.2 g·cm^–2·h^–1, respectively. This dual enhancer formulation also resulted in a marked increase in the transdermal fluxes of the enhancers. Furthermore, skin lipid phase transition temperatures were significantly reduced by treatment with this formulation. Conclusion. Transdermal delivery of highly lipophilic drugs can be realized by using the permeation enhancer combination propylene glycol-lauric acid. The extraordinary permeation enhancement for highly lipophilic drugs by this formulation is due to mutual permeation enhancement of these two enhancers and their synergistic lipid-fluidising activity in the stratum corneum.     

Novel hyperbranched polyamidoamine nanoparticle based gene delivery: transfection, cytotoxicity and in vitro evaluation

In this study, hyperbranched polyamidoamine (hPAMAM) was developed as a novel non-viral gene vector for the first time. The hPAMAM was synthesized using a modified “one-pot” method. DNA was then bound to hPAMAM at different weight ratios (w_hPAMAM/w_DNA). The higher weight ratio could bring larger particle size and higher zeta potential of hPAMAM-DNA complexes. The encapsulated DNA was protected by hPAMAM from degradation for over 3 h. Under the optimal condition, high gene transfection efficiency could be achieved in COS7 (47.47 ± 1.42%) and HEK293 (40.8 ± 0.98%) cell lines. And hPAMAM showed rather minor cytotoxicity in vitro (cell viability = 91.38 ± 0.46% in COS7 and 92.38 ± 0.61% in HEK293). The hPAMAM mediated human vascular endothelial growth factor 165 (hVEGF₁₆₅) gene transfected cells could express hVEGF₁₆₅ stably for 14 days, with the peak expression at day 2. In conclusion, hPAMAM based gene delivery was economical, effective and biocompatible, and may serve as a promising non-viral vehicle for gene therapy.     

Sildenafil citrate improves the delivery and anticancer activity of doxorubicin formulations in a mouse model of breast cancer

Sildenafil is an approved drug for the treatment of erectile dysfunction. The drug exerts its action through the relaxation of smooth muscles and the modulation of vascular endothelial permeability. In this work, we tested whether the aforementioned effects of sildenafil on tumour vasculatures could result in an improvement of anticancer drug concentration in tumour tissues and hence improves its anticancer effect. Sildenafil when added to doxorubicin showed synergistic anticancer activity against 4T1 breast cancer cells in vitro. Adding 1, 30 and 100?μM of Viagra to 1?μM of doxorubicin resulted in 1.8-fold, 6.2-fold and 21-fold statistically significant increases in its cytotoxic effect, respectively. As a result, 4T1 tumour-bearing mice showed up to 2.7-fold increase in drug concentrations of the fluorescent Dye DiI and doxorubicin in tumour tissues, as well as their nanoformulations. Animals treated with the combinations of both Sildenafil citrate and doxorubicin showed a statistically significant 4.7-fold reduction in tumour size compared to doxorubicin alone. This work highlights the effect of Sildenafil on tumour vasculatures and provides a rational for further testing the combination on breast cancer patients.     

Curcumin-loaded mixed micelles: preparation,optimization, physicochemical properties and cytotoxicity in vitro

Abstract

Although curcumin (CUR) can inhibit proliferation and induce apoptosis of tumors, the poor water solubility restricted its clinical application. The aim of this study was to improve the aqueous solubility of CUR and make more favorable changes to bioactivity by preparing curcumin-loaded phospholipid-sodium deoxycholate-mixed micelles (CUR-PC-SDC-MMs). CUR-PC-SDC-MMs were prepared by the thin-film dispersion method. Based on the results of single factor exploration, the preparation technology was optimized using the central composite design-response surface methodology with drug loading and entrapment efficiency (EE%) as indicators. The images of transmission electron microscopy showed that the optimized CUR-PC-SDC-MMs were spherical and well dispersed. The average size of the mixed micelles was 66.5?nm, the zeta potential was about ?26.96?mV and critical micelle concentration was 0.0087?g/l. CUR was encapsulated in PC-SDC-MMs with loading capacity of 13.12%, EE% of 87.58%, and the solubility of CUR in water was 3.14?mg/ml. The release results in vitro showed that the mixed micelles presented sustained release behavior compared to the propylene glycol solution of CUR. The IC₅₀ values of CUR-loaded micelles and free drug in human breast carcinoma cell lines were 4.10?μg/ml and 6.93?µg/ml, respectively. It could be concluded from the above results that the CUR-PC-SDC-MMs system might serve as a promising nanocarrier to improve the solubility and bioactivity of CUR.     

M细胞模型及其在生物大分子药物口服递药研究中的应用

如何克服胃肠道吸收屏障是蛋白质、多肽和核酸等生物大分子药物口服给药面临的重大挑战。M细胞是胃肠道上皮细胞内一种特殊的抗原摄取细胞,具有高内吞和低降解特征,可能对生物大分子药物的口服吸收发挥重要作用。M细胞体外共培养系统的开发,以及在其基础上建立的体外模型,促进了对M细胞本身以及大分子药物口服给药系统的研究。本文综述了M细胞特殊的结构、功能、形成及生物标志特点,讨论了M细胞体外模型在开发生物活性大分子药物口服给药系统的应用。     

Polyoxyethylated nonionic surfactants and their applications in topical ocular drug delivery

Topical dosing of ophthalmic drugs to the eye is a widely accepted route of administration because of convenience, ease of use, and non-invasiveness. However, it has been well recognized that topical ocular delivery endures a low bioavailability due to the anatomical and physiological constraints of the eye which limit drug absorption from the pre-corneal surface. Nonionic surfactants as versatile functional agents in topical ocular drug delivery systems are uniquely suited to meet the challenges through their potential ability to increase bioavailability by increasing drug solubility, prolonging pre-corneal retention, and enhancing permeability. This review attempts to place in perspective the importance of polyoxyethylated nonionic surfactants in the design and development of topical ocular drug delivery systems by assessing their compatibility with common ophthalmic inactive ingredients, their impact on product stability, and their roles in facilitating ocular drugs to reach the target sites.     

Preparation and in vitro release of zein microparticles loaded with prednisolone for oral delivery

Zein has been proposed as a polymer for targeted-drug delivery via the oral route. Zein microparticles were loaded with prednisolone and evaluated as an oral delivery system. Microparticles were formulated using phase separation. Starting quantities of zein and prednisolone, along with the agitation method and temperature were found to significantly impact drug loading and loading efficiency. Vortex mixing produced the highest drug loading and loading efficiency. Drug release was measured in simulated conditions of the stomach and small intestine using the microparticles made with the method that best improved drug loading. In simulated stomach and small intestine conditions, prednisolone release reached almost 70% over 3 and 4?h, respectively. While a clinically relevant dose may be delivered using c. 100?mg of zein microparticles, prednisolone release from the microparticles indicates that they may not be suited as a controlled- or targeted-delivery system.     

Bacterial cellulose membranes applied in topical and transdermal delivery of lidocaine hydrochloride and ibuprofen: in vitro diffusion studies

Bacterial cellulose (BC) is a biomaterial with unique physical and mechanical properties that triggered considerable interest, but there are few studies addressing the use of such membranes for drug loading and controlled release. This study aimed to investigate the applicability of BC membranes in topical or transdermal drug delivery systems. To assess its therapeutic feasibility, the permeation through human epidermis of two model drugs (lidocaine hydrochloride and ibuprofen) in BC and other formulation systems was compared in vitro. A uniform distribution of both drugs in the BC membranes was achieved. Diffusion studies with Franz cells showed that the incorporation of lidocaine hydrochloride in BC membranes provided lower permeation rates than those obtained with the conventional formulations. However, the results obtained with the lipophilic drug were quite different, since permeation of ibuprofen in BC was almost three times higher than that of the drug in the gel or in a PEG400 solution. These results indicate that this technology can be successfully applied to modulate the bioavailability of drugs for percutaneous administration, which could be particularly advantageous in the design of delivery systems that have, simultaneously, the ability to absorb exudates and to adhere to irregular skin surfaces.     

Formulation and in vitro evaluation of ciprofloxacin containing niosomes for pulmonary delivery

In order to develop a niosome-encapsulated ciprofloxacin (CPFX) HCl formulation for pulmonary delivery, the feasibility of encapsulation of CPFX in niosomes, its stability and nebulization capability was evaluated. Various combinations of nonionic surfactants with cholesterol were used to prepare the formulations. The in vitro deposition data of the niosomal formulations were examined using an Andersen cascade impactor. Formulations composed of Span 60 and Tween 60 in combination with 40 mol% of cholesterol exhibited high encapsulation efficacy and stability and also had fine particle fraction and nebulization efficiency of about 61.9% ± 1.0 and 77.9 ± 2.8, respectively. Minimal inhibitory concentration of the niosomal CPFX against some pulmonary pathogens were lower than free CPFX. Using the MTT assay in human lung carcinoma cell line (A549), niosome-entrapped CPFX showed significantly lower cytotoxicity in comparison to the free drug. These results indicate that niosome can be used as a carrier for pulmonary delivery of CPFX via nebulization.     

Advances in using chitosan-based nanoparticles for in vitro and in vivo drug and gene delivery

Importance of the field: This review aims to provide an overview of state-of-the-art chitosan-based nanosized carriers for the delivery of therapeutic agents. Chitosan nanocarriers are smart delivery systems owing to the possibility of their property alterations with various approaches, which would confer them with the possibility of spatiotemporal delivery features.

Areas covered in this review: The focus of this review is principally on those aspects that have not often been addressed in other reviews. These include the influence of physicochemical properties of chitosan on delivery mechanisms and chitosan modification with a variety of ligand moieties specific for cell surface receptors to increase recognition and uptake of nanocarriers into cells through receptor-mediated endocytosis. Multiple examples that demonstrate the advantages of chitosan-based nanocarriers over other delivery systems of therapeutic agents are highlighted. Particular emphasis is given to the alteration of material properties by functionalization or combination with other polymers for their specific applications. Finally, structural and experimental parameters influencing transfection efficiency of chitosan-based nanocarriers are presented for both in vitro and in vivo gene delivery.

What the reader will gain: The readers will acquire knowledge of parameters influencing the properties of the chitosan-based nanocarriers for delivery of therapeutic agents (genetic material or drugs) in vitro and in vivo. They will get a better idea of the strategies to be adapted to tune the characteristics of chitosan and chitosan derivatives for specific delivery applications.

Take home message: Chitosan is prone to chemical and physical modifications, and is very responsive to environmental stimuli such as temperature and pH. These features make chitosan a smart material with great potential for developing multifunctional nanocarrier systems to deliver large varieties of therapeutic agents administrated in multiple ways with reduced side effects.     

The role of microneedles for drug and vaccine delivery

Introduction: Transdermal drug delivery offers a number of advantages for the patient, not only due to its non-invasive and convenient nature, but also due to factors such as avoidance of first-pass metabolism and prevention of gastrointestinal degradation. It has been demonstrated that microneedles (MNs) can increase the number of compounds amenable to transdermal delivery by penetrating the skin’s protective barrier, the stratum corneum, and creating a pathway for drug permeation to the dermal tissue below.

Areas covered: MNs have been extensively investigated for drug and vaccine delivery. The different types of MN arrays and their delivery capabilities are discussed in terms of drugs, including biopharmaceutics and vaccines. Patient usage and effects on the skin are also considered.

Expert opinion: MN research and development is now at the stage where commercialisation is a viable possibility. There are a number of long-term safety questions relating to patient usage which will need to be addressed moving forward. Regulatory guidance is awaited to direct the scale-up of the manufacturing process alongside provision of clearer patient instruction for safe and effective use of MN devices.     

Comparison of in situ gelling formulations for the oral delivery of cimetidine

Three liquid formulations with in situ gelling properties have been assessed for their potential for the oral delivery of cimetidine. The formulations were dilute solutions of: (a) enzyme-degraded xyloglucan, which form thermally reversible gels on warming to body temperature; (b) gellan gum and; (c) sodium alginate both containing complexed calcium ions that form gels when these ions are released in the acidic environment of the stomach. The in vitro release of cimetidine from gels of each of the compounds followed root-time kinetics over a period of 6 h. Plasma levels of cimetidine after oral administration to rabbits of each of the formulations were compared with those resulting from administration of a commercial cimetidine/alginate suspension with an identical drug loading. In vivo release characteristics of each of the in situ gelling formulations were similar to those of the commercial preparation.     

Magnetic targeting for site-specific drug delivery: applications and clinical potential

Background: Magnetic vehicles are very attractive for delivery of therapeutic agents as they can be targeted to specific locations in the body through the application of a magnetic field gradient. The magnetic localization of a therapeutic agent results in the concentration of the therapy at the target site consequently reducing or eliminating the systemic drug side effects. Objective: The aim of this review is to provide an update on the progress made in the development of the magnetic targeting technique addressing characteristics of the magnetic carriers and limitations of the current targeting magnet systems. Methods: This review discusses fundamental requirements for the optimal formulation of the magnetic carrier, current applications and potentially new approaches for the magnetically mediated, site-specific localization of therapeutic agents, including drugs, genes and cells. Results/conclusion: More efficient targeting magnetic systems in combination with prolonged circulation lifespan and carriers' surface recognition properties will improve the targeting efficiency of magnetic nanocarriers and enhance therapeutic agent availability at the molecular site of agent action. The main future magnetic targeting applications were categorized emphasizing the most promising directions and possible strategies for improving the magnetic targeting technique.