电子束CT检测冠状动脉钙化的方法及初步结果报告

目的：报告电子束ＣＴ检测冠状动脉钙化（ＣＡＣ）的方法和初步研究结果。材料和方法：将经ＩｍａｔｒｏｎＣ－１５０电子束ＣＴ机检查冠状动脉的９０例分为三组：（１）非冠心组；（２）可疑组；（３）冠心组。对各例冠状动脉的走行进行观察；对比分析各组ＣＡＣ的发生率和钙化定量积分。结果：电子束ＣＴ能清晰地显示冠状动脉主干及主要分支。ＣＡＣ发生率冠心组为９５．０％（１９／２０例），可疑组为４８．６％（１７／３５例），非冠心组为２２．９％（８／３５例），差别具有显著性（ｐ＜０．００１）。发生ＣＡＣ的４４例中，冠心组的定量总分显著高于可疑组和非冠心组（Ｐ值分别＜０．０５和＜０．０１）。结论：电子束ＣＴ检测ＣＡＣ可为早期冠心病的诊断、预测和防治提供依据。     

Impact of advanced modeled iterative reconstruction on interreader agreement in coronary artery measurements

ObjectivesTo evaluate the influence of advanced modeled iterative reconstruction (ADMIRE) on coronary artery computed tomography angiography (cCTA) measurements in comparison to filtered back projection (FBP).Material and methodsPhantom scans and coronary CTA studies of 27 patients were acquired with a third generation dual-source CT scanner. Images were reconstructed using FBP and ADMIRE. Phantom measurements were used as reference standard. In patient studies, representative axial slices of each coronary artery segment without (n = 308) and with coronary plaques (n = 40) were assessed in identical positions for comparison of FBP and ADMIRE reconstructions. Image analyses included quality assessment, phantom and coronary artery measurements, plaque analysis, and interreader agreement of two independent and blinded readers.ResultsMean image noise was lower on ADMIRE reconstructions with 31.3 ± 9.9 HU compared to 55.9 ± 15.7 HU on FBP reconstructions (p < 0.001). Measurement precision and interreader agreement of both observers were assessed satisfactorily on phantom images in comparison to the full width half maximum method. In patients, correlation of lumen diameters of both observers improved using ADMIRE with a Pearson’s r = 0.987 (95% confidence interval [CI], 0.983–0.989; p < 0.001) compared to FBP images with r = 0.939 (95% CI, 0.924–0.951; p < 0.001). Applying ADMIRE, agreement of both observers for lumen diameter measurements significantly increased (p < 0.001). This was also observed for the degree of stenosis (p < 0.001) with r = 0.560 using FBP (95% CI, 0.301–0.742) and with r = 0.818 using ADMIRE (95% CI, 0.680–0.900). Plaque density measurements correlated closely with a Pearson’s r of 0.951 in FBP (95% CI, 0.909–0.974) and 0.967 in ADMIRE (95% CI, 0.939–0.983).ConclusionsAdvanced modeled iterative reconstruction significantly improves coronary artery assessment in coronary CTA in comparison to FBP by improved image quality due to image noise removal. This renders improved interobserver agreement for coronary lumen diameter and degree of stenosis measurements without influencing mean plaque attenuation.     

Update on multidetector coronary CT angiography of coronary stents: in vitro evaluation of 29 different stent types with dual-source CT

The aim of this study was to test a large sample of the latest coronary artery stents using four image reconstruction approaches with respect to lumen visualization, lumen attenuation, and image noise in dual-source multidetector row CT (DSCT) in vitro and to provide a CT catalogue of currently used coronary artery stents. Twenty-nine different coronary artery stents (19 steel, 6 cobalt-chromium, 2 tantalum, 1 iron, 1 magnesium) were examined in a coronary artery phantom (vessel diameter 3 mm, intravascular attenuation 250 HU, extravascular density −70 HU). Stents were imaged in axial orientation with standard parameters: 32 × 0.6 collimation, pitch 0.24, 400 mAs, 120 kV, rotation time 0.33 s. Image reconstructions were obtained with four different convolution kernels (soft, medium-soft, standard high-resolution, stent-dedicated). To evaluate visualization characteristics of the stent, the lumen diameter, intraluminal density, and noise were measured. The stent-dedicated kernel offered best average lumen visualization (54 ± 8.3%) and most realistic lumen attenuation (222  ± 44 HU) at the expense of increased noise (23.9 ± 1.9 HU) compared with standard CTA protocols (p < 0.001 for all). The magnesium stent showed the least artifacts with a lumen visibility of 90%. The majority of stents (79%) exhibited a lumen visibility of 50–59%. Less than half of the stent lumen was visible in only six stents. Stent lumen visibility largely varies depending on the stent type. Magnesium is by far more favorable a stent material with regard to CT imaging when compared with the more common materials steel, cobalt-chromium, or tantalum. The magnesium stent exhibits a lumen visibility of 90%, whereas the majority of the other stents exhibit a lumen visibility of 50–59%. David Maintz and Matthias Burg contributed equally to this publication.     

Detection and quantification of coronary artery calcification with electron-beam and conventional CT

To identify patients with increased risk of having coronary artery disease (CAD), electron-beam computed tomography (EBCT) was used for years for quantifying calcifications of the coronary arteries. The first direct comparison between EBCT and conventional CT was performed to determine the reliability of widely available conventional CT for the assessment of the coronary calcium score. Fifty male patients with suspected CAD were investigated with both modalities, EBCT and conventional 500-ms non-spiral partial scan CT. Scoring of the coronary calcification was performed according to the Agatston method. Forty-two of these patients underwent coronary angiography for the assessment of significant luminal narrowing. The correlation coefficient of the score values of both modalities was highly significant (r = 0.982, p < 0.001). The variability between the two modalities was 42 %. Mean calcium score in patients with significant coronary luminal narrowing (n = 37) was 1104 ± 1089 with EBCT and 1229 ± 1327 with conventional CT. In patients without luminal narrowing (n = 5) mean calcium score was 73 ± 57 with EBCT and 26 ± 35 with conventional CT. Although images of the heart from conventional CT may suffer from cardiac motion artifacts, conventional CT has the potential to identify patients with CAD with accuracy similar to EBCT. Received: 13 July 1998; Revision received: 11 October 1998; Accepted: 14 October 1998     

冠状动脉CT对冠心病的诊断价值(附45例冠状动脉造影对比分析)

对临床可疑冠心病、冠心病、心肌梗塞患者45例,作冠状动脉CT检查冠状动脉钙化,并描述CT显示的钙化程度和形态,诊断冠心病,同时与冠状动脉造影对比。结果显示,两者完全符合者36例(80％),基本符合者4例(8.89％)。为冠心病无创诊断提供有效的检查手段。     

A retrospectively ECG-gated multislice spiral CT scan and reconstruction technique with suppression of heart pulsation artifacts for cardio-thoracic imaging with extended volume coverage

A method for cardio-thoracic multislice spiral CT imaging with ECG gating for suppression of heart pulsation artifacts is introduced. The proposed technique offers extended volume coverage compared with standard ECG-gated spiral scan and reconstruction approaches for cardiac applications: Thin-slice data of the entire thorax can be acquired within one breath-hold period using a four-slice CT system. The extended volume coverage is enabled by a modified approach for ECG-gated image reconstruction. For a CT system with 0.5-s gantry rotation time, images are reconstructed with 250-ms image temporal resolution. Instead of selecting scan data acquired in exactly the same phase of the cardiac cycle for each image as in standard ECG-gated reconstruction techniques, the patient's ECG signal is used to omit scan data acquired during the systolic phase of highest cardiac motion. With this approach cardiac pulsation artifacts in CT studies of the aorta, of paracardiac lung segments, and of coronary bypass grafts can be effectively reduced.     

Screening for coronary artery disease in respiratory patients: comparison of single- and dual-source CT in patients with a heart rate above 70 bpm

To evaluate the assessibility of coronary arteries in respiratory patients with high heart rates. This study was based on the comparative analysis of two paired populations of 54 patients with a heart rate >70 bpm evaluated with dual-source (group 1) and single-source (group 2) CT. The mean heart rate was 89.1 bpm in group 1 and 86.7 bpm in group 2 (P = 0.26). The mean number of assessable segments per patient was significantly higher in group 1 compared to group 2 (P 相似文献   

Imaging of coronary artery stents using multislice computed tomography: in vitro evaluation

The aim of this study was to evaluate imaging features of different coronary artery stents during multislice CT Angiography (MSCTA). Nineteen stents made of varying material (steel, nitinol, tantalum) and of varying stent design were implanted in plastic tubes with an inner diameter of 3 mm to simulate a coronary artery. The tubes were filled with iodinated contrast material diluted to 200 Hounsfield units (HU), closed at both ends and positioned in a plastic container filled with oil (–70 HU). The MSCT scans were obtained perpendicular to the stent axes (detector collimation 4×1 mm, table feed 2 mm/rotation, 300 mAs, 120 kV). Axial images and multiplanar reformations were evaluated regarding artifact size, lumen visibility, and intraluminal attenuation values. Artifacts characterized by artifactual thickening of the stent struts leading to apparent reduction in the lumen diameter and increased intraluminal attenuation values were observed in all cases. The stent lumen was totally obscured in the Wiktor stent, the Wallgraft stent, and the Nir Royal stent. Partial residual of the stent lumen could be visualized in all other utilized stent products (artificial lumen reductions ranged from 62% in the V-Flex stent to 94% in the Bx Velocity stent). Parts of the stent lumen can be visualized in most coronary artery stents; however, detectability of in-stent stenoses remains to be evaluated for each stent type. Electronic Publication     

Anomalous origin of the left coronary artery arising from the pulmonary trunk: report of an adult case with long-term follow-up after surgery

An anomalous origin of the left coronary artery arising from the pulmonary artery is a congenital malformation rarely described in adults. We report the case of a 65-year-old patient with this anomaly. Clinical presentation, imaging identification (coronary angiogram, MRI and electron-beam CT), surgical treatment and angiographic long-term follow-up are described. Received: 18 May 1998; Revised: 27 December 1998; Accepted: 15 February 1999     

64MDCT冠状动脉成像在冠心病诊断中的应用价值

目的探讨64层螺旋CT冠状动脉成像在冠心病诊断中的应用价值。方法随机选择我院2010年10月～2011年12月46例由于胸痛、胸闷就诊的患者,分别给予64层螺旋CT冠状动脉成像与选择性冠状动脉造影,以选择性冠状动脉造影检查的结果为“金标准”,分析64层螺旋CT冠状动脉成像在冠心病诊断中的敏感性、特异性及准确率。结果MDCTCA共检查节段586个,直径在1．5mm以上有504个,检出狭窄程度≥50％的28例,漏诊1例,误诊2例。与冠状动脉造影检查结果相比,64层螺旋CT冠状动脉成像检查的敏感性为96．3％（26／27例）,特异性为89．5％（17／19例）,准确性为93．5％（43／46例）,阳性预测值为92．9％（26／28）,阴性预测值为94．4％（17／18）,差异无统计学意义（P〉0．05）。结论64层螺旋CTCA具有无创、安全、经济且操作简便的优点,对冠状动脉病变诊断具有良好的敏感度和特异性,是一种可广泛应用于冠心病的筛选和诊断的检查方法。     

对电子束CT冠状动脉钙化评分准确性的评价

目的：评价在电子束ＣＴ图像上测定冠状动脉钙化准确性。材料和方法：选择两位有经验的医生分别对经ＩｍａｔｒｏｎＣ－１５０电子束ＣＴ机检查的５０例作冠状动脉钙化定性和定量积分测定，其中一位医生测定两次。结果：除不同测定者定性测定左冠状动脉主干钙化的结果差别显著（ｐ＜００２５）外，其余结果均无显著差异。定量测定的相关系数为０．８９８～０９。结论：在电子束ＣＴ图像上可准确地重复测得冠状动脉钙化定性、定量结果。     

Comparison of coronary artery measurements between echocardiograms and cardiac CT in Kawasaki disease patients with aneurysms

BackgroundAmerican Heart Association (AHA) guidelines for management of Kawasaki disease (KD) rely on coronary artery (CA) z-scores from echocardiograms. Compared with echocardiography, cardiac CT (CCT) offers better visualization of distal segments and evaluation for thrombosis and stenosis. Despite increasing use of CCT in KD, CA z-scores for CCT are not available and measurement concordance between imaging modalities is a critical knowledge gap.MethodsWe retrospectively reviewed KD patients with CA aneurysms who had concurrent echocardiography and CCT between 2016 and 2020. Patients were included if they had history of CA z-scores of ≥3 on echocardiography during their clinical course. Agreement between CCT and echocardiography was assessed using Bland-Altman analysis.ResultsPaired CCT and echocardiography studies were available in 18 patients (21 studies). The largest CA aneurysms were large/giant (z-score ≥10) in 14 studies, medium (z-score ≥5, <10) in 3 studies, and small (z score ≥2.5, <5) in 2 studies. Intra- and inter-observer reliability for CCT measurements were high for all CA segments (ICC 99.7% and 98.6%). For the LMCA, proximal LAD and proximal and distal RCA there was high correlation between echocardiogram and CCT absolute measurements with wider variation between modalities for the distal LAD and circumflex. Overall, CCT measurements tended to be smaller than echocardiogram measurements, and led to a lower AHA z-score risk classification in 24% of studies.ConclusionCCT and echocardiography have high agreement for absolute measurements of proximal CA segments, but more measurement discrepancy exists for distal CA segments with bias toward lower dimensions on CCT.     

Italian multicenter, prospective study to evaluate the negative predictive value of 16- and 64-slice MDCT imaging in patients scheduled for coronary angiography (NIMISCAD-Non Invasive Multicenter Italian Study for Coronary Artery Disease)

This was a prospective, multicenter study designed to evaluate the utility of MDCT in the diagnosis of coronary artery disease (CAD) in patients scheduled for elective coronary angiography (CA) using different MDCT systems from different manufacturers. Twenty national sites prospectively enrolled 367 patients between July 2004 and June 2006. Computed tomography (CT) was performed using a standardized/optimized scan protocol for each type of MDCT system (≥16 slices) and compared with quantitative CA performed within 2 weeks of MDCT. A total of 284 patients (81%) were studied by 16-slice MDCT systems, while 66 patients (19%) by 64-slice MDCT scanners. The primary analysis was on-site/off-site evaluation of the negative predictive value (NPV) on a per-patient basis. Secondary analyses included on-site evaluation on a per-artery and per-segment basis. On-site evaluation included 327 patients (CAD prevalence 58%). NPV, positive predictive value (PPV), sensitivity, specificity, and diagnostic accuracy (DA) were 0.91 (95% CI 0.85–0.95), 0.91 (95% CI 0.86–0.95), 0.94 (95% CI 0.89–0.97), 0.88 (95% CI 0.81–0.93), and 0.91 (95% CI 0.88–0.94), respectively. Off-site analysis included 295 patients (CAD prevalence 56%). NPV, PPV, sensitivity, specificity, and DA were 0.73 (95% CI 0.65–0.79), 0.93 (95% CI 0.87–0.97), 0.73 (95% CI 0.65–0.79), 0.93 (95% CI 0.87–0.97), and 0.82 (95% CI 0.77–0.86), respectively. The results of this study demonstrate the utility of MDCT in excluding significant CAD even when conducted by centers with varying degrees of expertise and using different MDCT machines.     

Detection of coronary artery calcifications predicting coronary heart disease: comparison of fluoroscopy and spiral CT

The aim of this study was to evaluate the clinical relevance of coronary artery calcifications detected by spiral CT, congruence with fluoroscopy (FS) and coronary angiography, and comparison with studies reporting on application of double-helical CT and ultrafast CT. Forty patients underwent spiral CT (2-mm slice thickness, table feed 3 mm/s), coronary angiography, and FS (performed in the usual manner). Stenosis and calcifications were evaluated semiquantitatively. Nineteen patients suffering from a stenosis ≥ 75 % were verified at coronary angiography. All had coronary artery calcification on spiral CT. Fluoroscopy did not detect 8 of 19 patients with a stenosis ≥ 75 % (1 vessel: n = 1; 2 vessels: n = 3; 3 vessels: n = 4). In spiral CT sensitivity was 100 % and specificity was 33 % (FS: 58 and 48 %). Positive predictive value was 83 % for spiral CT (FS: 50 %), and negative predictive value was 100 % (FS: 56 %). A significant linear increase in the calcification score was found for increasing maximal stenosis (p < 0.005). Spiral CT is more sensitive than FS in the recognition of hemodynamic relevant stenoses using the detection of coronary artery calcifications. Statistical parameters are comparable to ultrafast-CT. Spiral CT is a suitable non-invasive diagnostic technique in coronary heart disease. Coronary calcifications found incidentally in symptomatic patients at chest CT should be reported to the referring physician for further cardiological workup. Received 14 July 1997; Revision received 29 December 1997; Accepted 5 January 1998     

Inadvertent anastomosis of saphenous vein graft to a cardiac vein detected with coronary computed tomographic angiography

A 34-year-old man with a prior history of Hodgkin’s disease and coronary artery bypass surgery for radiation-induced left main disease presented with persistent chest pain. Cardiac catheterization showed near simultaneous filling of the venous system during arterial injection and could not precisely delineate the insertion point of the vein graft anastamosis to the diagonal branch, and the patient was referred for coronary computed tomography angiography (CTA). CTA demonstrated that the anastamosis of the graft was with a cardiac vein. This case illustrates the valuable complementary role of both angiographic methodologies in confirming a complex anatomic diagnosis.     

Pre-procedural planning of coronary revascularization by cardiac computed tomography: An expert consensus document of the Society of Cardiovascular Computed Tomography

Coronary CT angiography (CCTA) demonstrated high diagnostic accuracy for detecting coronary artery disease (CAD) and a key role in the management of patients with low-to-intermediate pretest likelihood of CAD. However, the clinical information provided by this noninvasive method is still regarded insufficient in patients with diffuse and complex CAD and for planning percutaneous coronary intervention (PCI) and surgical revascularization procedures. On the other hand, technology advancements have recently shown to improve CCTA diagnostic accuracy in patients with diffuse and calcific stenoses. Moreover, stress CT myocardial perfusion imaging (CT-MPI) and fractional flow reserve derived from CCTA (CT-FFR) have been introduced in clinical practice as new tools for evaluating the functional relevance of coronary stenoses, with the possibility to overcome the main CCTA drawback, i.e. anatomical assessment only. The potential value of CCTA to plan and guide interventional procedures lies in the wide range of information it can provide: a) detailed evaluation of plaque extension, volume and composition; b) prediction of procedural success of CTO PCI using scores derived from CCTA; c) identification of coronary lesions requiring additional techniques (e.g., atherectomy and lithotripsy) to improve stent implantation success by assessing calcium score and calcific plaque distribution; d) assessment of CCTA-derived Syntax Score and Syntax Score II, which allows to select the mode of revascularization (PCI or CABG) in patients with complex and multivessel CAD.The aim of this Consensus Document is to review and discuss the available data supporting the role of CCTA, CT-FFR and stress CT-MPI in the preprocedural and possibly intraprocedural planning and guidance of myocardial revascularization interventions.     

Detection of significant coronary artery stenosis with 64-section MDCT angiography

PURPOSE: To prospectively evaluate the diagnostic performance of 64-section multidetector computed tomography (MDCT) to detect significant coronary artery stenosis using conventional coronary angiography (CCA) as the reference standard. MATERIALS AND METHODS: Institutional Review Board approval and informed consent were obtained. In this prospective study, 80 patients (61 male, 19 female, mean age 56) were examined. Sensitivity, specificity, positive (PPV) and negative predictive values (NPV) were calculated. McNemar test was used to search for the significant difference between 64-section MDCT angiography and CCA to detect stenosis. Also, kappa index (kappa) for the agreement between MDCT angiography and CCA was calculated. RESULTS: The sensitivity, specificity, positive (PPV) and negative predictive values (NPV) for detecting significant stenosis were 96%, 98%, 91%, 99%, respectively. The sensitivity, specificity, PPV and NPV for classification of patients with or without CAD were 100% for all. McNemar test demonstrated no significant difference between 64-section MDCT angiography and CCA. Also, kappa index (kappa) indicated excellent agreement. CONCLUSION: Sixty-four section MDCT angiography is an effective diagnostic tool for the detection of significant coronary artery stenosis. Especially, the potential to differentiate patients with and without CAD may provide MDCT an important role in the prevention of unnecessary invasive diagnostic procedures.     

Coronary artery aneurysm and type-A aortic dissection demonstrated by retrospectively ECG-gated multislice spiral CT

The case of a 40-year-old male patient with a coronary aneurysm of the proximal left descending artery (LAD) combined with circumferential type-A dissection of the ascending aorta is reported. Computed tomography angiography of the coronary arteries was performed using multislice spiral computed tomography (MSCT) with retrospective ECG gating. Anatomical relations of the LAD aneurysm as well as the origin of the left coronary artery from the false lumen of the dissection were well depicted for planning of the surgical intervention using this new noninvasive imaging modality.