Treatment of a transmigrated and an impacted mandibular canine along with missing maxillary central incisor: A case report

IntroductionTreatment of a case with impacted canines is complex and numerous options are available ranging from disimpaction to forced eruption.ObjectiveThe objective of this case report was to describe the treatment of a 19-year-old male, with a skeletal Class II, dental Class II Division 1 malocclusion, prognathic maxilla, proclined maxillary incisors, with missing left maxillary central incisor and bilateral mandibular canine impaction.MethodologyThe orthodontic treatment plan included forced eruption of the impacted canines and conversion of maxillary left lateral incisor to central incisor.ConclusionProper diagnosis and implementation of orthodontic biomechanics can minimize the amount of prosthetic and surgical intervention needed in the management of transmigrated canine and smile designing.     

Treatment of a Class I bimaxillary protrusive malocclusion with a high mandibular plane angle: An American Board of Orthodontics case report.

A case report of the orthodontic treatment of a male adolescent with a Class I bimaxillary protrusive malocclusion, complicated by a vertical growth pattern and high mandibular plane angle. Treatment consisted of extraction of maxillary second premolars, mandibular first premolars, use of a transpalatal bar, occipital pull headgear, and light wire mechanics. An acceptable result was achieved, with a decrease in the facial axis, decrease in lip strain, and an attractive full smile. This case report was presented to the American Board of Orthodontics in partial fulfillment of the requirements for the certification process conducted by the Board.     

Recovery of multiple impacted maxillary teeth in a hyperdivergent Class I patient using Temporary Skeletal Anchorage Devices and augmented corticotomy

Treatment of multiple impacted teeth is challenging. Three-dimensional treatment planning can help in delivering a better outcome. This case report presents a patient with an incomplete dental transposition between the canine and lateral incisor of the maxillary right side associated with the impaction of a dilacerated right central incisor. Using a two-stage surgical exposure and augmented corticotomy, the patient''s occlusion and smile esthetics were significantly improved, and Class I occlusal relationships with optimal overjet and overbite were achieved after 50 months of orthodontic treatment. Thirty-month posttreatment records revealed a stable result.     

Maxillary canine impactions related to impacted central incisors: two case reports

AIM: The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. BACKGROUND: The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. REPORTS: Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. SUMMARY: This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.     

Class II,Division 1, case with multiple treatment challenges

This is a case report of a 23-year-old black woman with a skeletal Class II Division 1 malocclusion and an anterior open bite. The maxillary central incisor root was severely dilacerated, a maxillary lateral incisor and canine were transposed, a maxillary canine was impacted near the orbital rim, and a mandibular secong premolar was congenitally missing. Selective extractions and attention to detail provided outstanding occlusal function and improved facial esthetics. (Am J Orthod Dentofacial Orthop 1999;115:148-52)     

Orthodontic correction of a class III malocclusion in an adolescent patient with a bonded RPE and protraction face mask.

A case report of a 14-year-old Hispanic male with a Class-III skeletal profile and dental malocclusion with a long mandibular body and ramus and retrusive maxilla. The patient was initially referred for a surgical evaluation for a LeFort I maxillary advancement, but he wanted to avoid surgery. The Class-III malocclusion was corrected with a bonded rapid palatal expander and a maxillary protraction mask followed by nonextraction orthodontic treatment. A Class-I molar and canine relationship was achieved, and the facial profile improved. This case report demonstrates the orthodontic correction of a Class-III malocclusion in an adolescent patient with a bonded rapid palatal expander and protraction face mask. This case was presented to American Board of Orthodontics as partial fulfillment of the requirements for the certification process conducted by the Board.     

An American board of orthodontics case report

A case report is presented of an Angle Class I dental malocclusion, significant bimaxillary dentoalveolar protrusion, anterior open bite, and spacing of the maxillary and mandibular incisors. [This case was presented to the American Board of Orthodontics in partial fulfillment of the requirements for the certification process conducted by the Board.]     

A dental Class III malocclusion treated to a full-cusp Class II molar relationship

A case report of a Class III dental malocclusion superimposed on a straight skeletal pattern is presented. The patient was a 14-year-old girl with limited growth potential. This case included congenitally missing maxillary permanent lateral incisors, impacted maxillary permanent canines, and bilateral posterior open bites. The patient's soft-tissue profile was normally convex. In addition to her malocclusion, the patient had a history of difficulty breathing through the nose. The general treatment included palatal expansion, protraction headgear, and comprehensive edgewise orthodontic therapy.     

The use of temporary anchorage devices for orthodontic treatment of high-angle Class III malocclusion in a patient with impacted upper canine teeth

This case report describes the orthodontic treatment of a 13-year-old female patient with high-angle Class III malocclusion, including anterior open bite and impacted upper canine teeth with a convex soft tissue profile. In this case, preadjusted edgewise appliances were placed after the extraction of the upper deciduous canine teeth, impacted upper canine teeth and lower first premolars. The upper and lower dental arches were aligned using a temporary anchorage device (TAD) for retraction and intrusion of the lower incisors avoiding the extrusion of the lower molars. A good facial profile and occlusion were achieved after active treatment.     

An American Board of Orthodontics case report

A case report of a Class II, Division 1 malocclusion with an anterior open bite, severe overjet, and maxillary and mandibular arch length discrepancies, accompanied by a deficient mandible and high mandibular plane angle, is presented. The case was treated according to the standards of the American Board of Orthodontics.     

Nonsurgical correction of an adult skeletal class III and open-bite malocclusion

This case report presents an adult skeletal Class III and open-bite malocclusion case treated without surgical intervention using fixed edgewise technique, reverse headgear, and Class III and anterior box elastics. The patient was a 16-year-old Turkish female who had completed her growth and development. She had a four mm open bite, maxillary retrognathia, a crossbite in the anterior and left posterior, and hypoplasia of the maxillary laterals. In addition, the patient's first molars had previously been extracted because of caries, and extraction spaces were present. We applied a Roth edgewise appliance and a reverse headgear to be used at night only for the first six months. The objective in using a reverse headgear was to displace the maxillary teeth toward the mesial and to rotate the maxilla in a clockwise direction. In the mandible, we retracted the mandibular incisors and canine teeth and moved the second molars mesially toward the first molar extraction space. There would thus be no need for any prosthetic restoration in the mandible. At the end of treatment, we obtained a Class I dental relationship, an ideal occlusion relationship, and an esthetic dental and facial relationship. Treatment of the patient was completed in 20 months.     

Class II treatment by palatal miniscrew-system appliance: A case report

This case shows that using a rapid palatal expander (RPE) and then a pendulum appliance anchored to palatal miniscrews is an option for improving treatment management in a noncompliant patient requiring maxillary expansion and molar distalization in the late mixed dentition. First, an RPE was used to expand the maxillary arch. Then, a modified pendulum appliance was used to distalize the maxillary first permanent molars. Optimal positioning of two palatal miniscrews enabled both appliances to be supported by skeletal anchorage. Treatment was finished using multibracket fixed appliances, and after 2 years, skeletal Class I as well as dental Class I canine and molar relationships were achieved.     

Nonsurgical treatment of a Class III patient with a lateral open-bite malocclusion

A 15.3-year-old white girl with a skeletal Class III malocclusion and a severe lateral open bite was treated with conventional orthodontics and directional force mechanics and elastics. She had 5 congenitally missing premolars. The maxillary right canine was ectopically erupted and in contact with the maxillary right first molar. An Angle Class I molar relationship was achieved with canine protected occlusion and incisal guidance. A wrap-around retainer was placed on the maxillary arch and a lingual bonded retainer on the mandibular arch. Treatment time was 38 months.     

Total maxillary arch distalization by using headgear in an adult patient:: Reconsidering the traditional strategy in modern orthodontics

Although headgear is rarely used in adult patients, its use in adults is mainly for anchorage control. In the current case report, a 24-year-old patient had a skeletal Class I relationship with a Class II tendency, brachyfacial pattern, significant facial asymmetry, and dental 3/4 cusp Class II molar and canine relationships on both sides. The patient declined surgery, and facial asymmetry was not his concern. The final treatment goal was to achieve a stable Class I dental relationship and normal occlusion without significantly compromising the patient''s profile. The patient was compliant with the use of cervical-pull headgear after he refused the options of orthodontic-orthognathic combined treatment, maxillary premolar extraction, or temporary skeletal anchorage mini-implants. A 5-mm maxillary arch distal movement was accomplished without significant distal tipping of the molar crowns. The active treatment duration was 31 months. Proper overbite and overjet, balanced occlusion, and an acceptable facial profile were achieved. The treatment results inspire reconsideration of the possibility of using headgear in dental Class II correction in adult patients.     

Maxillary sinus volume in patients with impacted canines

Objectives:To evaluate the maxillary sinus volumes in unilaterally impacted canine patients and to compare the volumetric changes that occur after the eruption of canines to the dental arch using cone beam computed tomography (CBCT).Materials and Methods:Pre- (T0) and posttreatment (T1) CBCT records of 30 patients were used to calculate maxillary sinus volumes between the impacted and erupted canine sides. The InVivoDental 5.0 program was used to measure the volume of the maxillary sinuses. The distance from impacted canine cusp tip to the target point on the palatal plane was also measured.Results:Right maxillary sinus volume was statistically significantly smaller compared to that of the left maxillary sinus when the canine was impacted on the right side at T0. According to the T1 measurements there was no significant difference between the mean volumes of the impaction side and the contralateral side. The distance from the canine tip to its target point on the palatal plane were 17.17 mm, and the distance from the tip to the target point was 15.14 mm for the left- and right-side impacted canines, respectively, and there was a significant difference between the mean amount of change of both sides of maxillary sinuses after treatment of impacted canines.Conclusions:Orthodontic treatment of impacted canines created a significant increase in maxillary sinus volume when the impacted canines were closer with respect to the maxillary sinus.     

Bilateral maxillary fourth molars and a supernumerary tooth in maxillary canine region--a case report.

The occurrence of supernumerary teeth is a relatively uncommon dental anomaly. The aetiology is not clear. Supernumerary teeth have frequently been observed as solitary teeth and impacted in the maxillary arch. This case report describes the rare presence of bilateral maxillary fourth molars and a supernumerary tooth in the maxillary canine region. On the left side, the third molar was extracted first, allowing the fourth molar to move into a more favourable position for later extraction. Two-year postoperative radiography confirmed that the supernumerary tooth had migrated occlusally and mesially permitting a safer extraction procedure.     

A multidisciplinary treatment of congenitally missing maxillary lateral incisors: a 14-year follow-up case report

Absence of the maxillary lateral incisor creates an aesthetic problem which can be managed in various ways. The condition requires careful treatment planning and consideration of the options and outcomes following either space closure or prosthetic replacement. Recent developments in restorative dentistry have warranted a re-evaluation of the approach to this clinical situation. Factors relating both to the patient and the teeth, including the presentation of malocclusion and the effect on the occlusion must be considered. The objective of this study was to describe the etiology, prevalence and alternative treatment modalities for dental agenesis and to present a clinical case of agenesis of the maxillary lateral incisors treated by the closure of excessive spaces and canine re-anatomization. A clinical case is presented to illustrate the interdisciplinary approach between orthodontics and restorative dentistry for improved esthetic results. In this report, the treatment of a girl with a Class II malocclusion of molars and canines with missing maxillary lateral incisors and convex facial profile is shown. Treatment was successfully achieved and included the space closure of the areas corresponding to the missing upper lateral incisors, through movement of the canines and the posterior teeth to mesial by fixed appliances as well as the canines transformation in the maxillary lateral incisors. This is a 14-year follow-up case report involving orthodontics and restorative dentistry in which pretreatment, post-treatment, and long-term follow-up records for the patient are presented.     

An American Board of Orthodontics case report

A case report is presented of a Class II, Division 1 malocclusion with severe excess overjet, vertical maxillary excess, maxillary skeletal protrusion, and relative mandibular retrognathia. The case was treated according to the standards of the American Board of Orthodontics.     

Correction of a severe Class III malocclusion.

The success of early orthopedic treatment in patients with Class III anomalies depends on facial skeletal development and type of treatment. This case report describes the treatment of a 12.6-year-old girl who had a severe Class III malocclusion with a 6-mm anterior crossbite, a deep overbite, a narrow maxilla, and unerupted maxillary canines. The treatment plan included rapid palatal expansion to expand the maxilla, reverse headgear to correct the maxillary retrognathia, a removable anterior inclined bite plane to correct the anterior crossbite and the deep overbite, and fixed edgewise appliances to align the teeth. One canine was brought into alignment, but the other was placed in occlusion in its transposed position. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing.