Silk fibroin/polyacrylamide semi-interpenetrating network hydrogels for controlled drug release

The present study describes a semi-interpenetrating network hydrogel fabricated using silk fibroin/polyacrylamide for controlled drug delivery applications. Hydrogels were synthesized using varied ratios of silk fibroin/acrylamide mixtures crosslinked by N,N′-Methylenebisacrylamide. Fourier-Transform Infrared analysis was performed suggesting β sheet transition of silk fibroin with hydrogels. Scanning electron microscopy revealed microporous surface with maximum pore size of 50 ± 11 μm. Rheological properties along with swellability, degradation, sol fraction estimation, equilibrium water content and swelling kinetics were evaluated. Compressive strength of 241.9 ± 5.5 kPa was observed suggesting mechanically stronger gels. MTT assay showed biocompatibility and absence of deleterious effects of hydrogel on cell viability and functionality. In vitro release studies using two model compounds i.e. trypan blue dye and FITC-inulin reveal their sustained release from the fabricated hydrogel constructs.     

Silk coatings on PLGA and alginate microspheres for protein delivery

Bombyx mori silk fibroin self-assembles on surfaces to form ultrathin nanoscale coatings based on our prior studies using layer-by-layer deposition techniques driven by hydrophobic interactions between silk fibroin protein molecules. In the present study, poly(lactic-co-glycolic acid) (PLGA) and alginate microspheres were used as substrates and coated with silk fibroin. The coatings were visualized by confocal laser scanning microscopy using fluorescein-labeled silk fibroin. On PLGA microspheres, the coating was approximately 1microm and discontinuous, reflecting the porous surface of these microspheres determined by SEM. In contrast, on alginate microspheres the coating was approximately 10microm thick and continuous. The silk fibroin penetrated into the alginate gel matrix. The silk coating on the PLGA microspheres delayed PLGA degradation. The silk coating on the alginate microspheres survived ethylenediamine tetraacetic acid (EDTA) treatment used to remove the Ca(2+)-cross-links in the alginate gels to solubilize the alginate. This suggests that alginate microspheres can be used as templates to form silk microcapsules. Horseradish peroxidase (HRP) and tetramethylrhodamine-conjugated bovine serum albumin (Rh-BSA) as model protein drugs were encapsulated in the PLGA and alginate microspheres with and without the silk fibroin coatings. Drug release was significantly retarded by the silk coatings when compared to uncoated microsphere controls, and was retarded further by methanol-treated silk coating when compared to silk water-based coatings on alginate microspheres. Silk coatings on PLGA and alginate microspheres provide mechanically stable shells as well as a diffusion barrier to the encapsulated protein drugs. This coating technique has potential for biosensor and drug delivery applications due to the aqueous process employed, the ability to control coating thickness and crystalline content, and the biocompatibility of the silk fibroin protein used in the process.     

Cell proliferation and migration in silk fibroin 3D scaffolds

Pore architecture in 3D polymeric scaffolds is known to play a critical role in tissue engineering as it provides the vital framework for the seeded cells to organize into a functioning tissue. In this report, we investigated the effects of different freezing temperature regimes on silk fibroin protein 3D scaffold pore microstructure. The fabricated scaffolds using freeze-dry technique were used as a 3D model to monitor cell proliferation and migration. Pores of 200–250 μm diameter were formed by slow cooling at temperatures of ?20 and ?80 °C but were found to be limited in porosity and pore interconnectivity as observed through scanning electron microscopic images. In contrast, highly interconnected pores with 96% porosity were observed when silk solutions were rapidly frozen at ?196 °C. A detailed study was conducted to assess the affect of pore size, porosity and interconnectivity on human dermal fibroblast cell proliferation and migration on these 3D scaffolds using confocal microscopy. The cells were observed to migrate within the scaffold interconnectivities and were found to reach scaffold periphery within 28 days of culture. Confocal images further confirmed normal cell attachment and alignment of actin filaments within the porous scaffold matrix with well-developed nuclei. This study indicates rapid freeze-drying technique as an alternative method to fabricate highly interconnected porous scaffolds for developing functional 3D silk fibroin matrices for potential tissue engineering, biomedical and biotechnological applications.     

Multi-functional P(3HB) microsphere/45S5 Bioglass®-based composite scaffolds for bone tissue engineering

Novel multi-functional P(3HB) microsphere/45S5 Bioglass®-based composite scaffolds exhibiting potential for drug delivery were developed for bone tissue engineering. 45S5 Bioglass®-based glass–ceramic scaffolds of high interconnected porosity produced using the foam-replication technique were coated with biodegradable microspheres (size < 2 μm) made from poly(3-hydroxybutyrate), P(3HB), produced using Bacillus cereus SPV. A solid-in-oil-in-water emulsion solvent extraction/evaporation technique was used to produce these P(3HB) microspheres. A simple slurry-dipping method, using a 1 wt.% suspension of P(3HB) microspheres in water, dispersed by an ultrasonic bath, was used to coat the scaffold, producing a uniform microsphere coating throughout the three-dimensional scaffold structure. Compressive strength tests confirmed that the microsphere coating slightly enhanced the scaffold mechanical strength. It was also confirmed that the microsphere coating did not inhibit the bioactivity of the scaffold when immersed in simulated body fluid (SBF) for up to 4 weeks. The hydroxyapatite (HA) growth rate on P(3HB) microsphere-coated 45S5 Bioglass® composite scaffolds was very similar to that on the uncoated control sample, qualitatively indicating similar bioactivity. However, the surface topography of the HA surface layer was affected as shown by results obtained from white light interferometry. The roughness of the surface was much higher for the P(3HB) microsphere-coated scaffolds than for the uncoated samples, after 7 days in SBF. This feature would facilitate cell attachment and proliferation. Finally, gentamycin was successfully encapsulated into the P(3HB) microspheres to demonstrate the drug delivery capability of the scaffolds. Gentamycin release kinetics was determined using liquid chromatography–mass spectrometry. The release of the drug from the coated composite scaffolds was slow and controlled when compared to the observed fast and relatively uncontrolled drug release from the bone scaffold (without microsphere coating). Thus, this unique multifunctional bioactive composite scaffold has the potential to enhance cell attachment and to provide controlled delivery of relevant drugs for bone tissue engineering.     

Effects of protein molecular weight on the intrinsic material properties and release kinetics of wet spun polymeric microfiber delivery systems

Wet spun microfibers have great potential for the design of multifunctional controlled release scaffolds. Understanding aspects of drug delivery and mechanical strength, specific to protein molecular weight, may aid in the optimization and development of wet spun fiber platforms. This study investigated the intrinsic material properties and release kinetics of poly(l-lactic acid) (PLLA) and poly(lactic-co-glycolic acid) (PLGA) wet spun microfibers encapsulating proteins with varying molecular weights. A cryogenic emulsion technique developed in our laboratory was used to encapsulate insulin (5.8 kDa), lysozyme (14.3 kDa) and bovine serum albumin (BSA, 66.0 kDa) within wet spun microfibers (～100 μm). Protein loading was found to significantly influence mechanical strength and drug release kinetics of PLGA and PLLA microfibers in a molecular-weight-dependent manner. BSA encapsulation resulted in the most significant decrease in strength and ductility for both PLGA and PLLA microfibers. Interestingly, BSA-loaded PLGA microfibers had a twofold increase (8 ± 2 MPa to 16 ± 1 MPa) in tensile strength and a fourfold increase (3 ± 1% to 12 ± 6%) in elongation until failure in comparison to PLLA microfibers. PLGA and PLLA microfibers exhibited prolonged protein release up to 63 days in vitro. Further analysis with the Korsmeyer–Peppas kinetic model determined that the mechanism of protein release was dependent on Fickian diffusion. These results emphasize the critical role protein molecular weight has on the properties of wet spun filaments, highlighting the importance of designing small molecular analogues to replace growth factors with large molecular weights.     

In situ generation of sodium alginate/hydroxyapatite nanocomposite beads as drug-controlled release matrices

In order to find a new way to slow down the release of drugs and to solve the burst release problem of drugs from traditionally used hydrogel matrices, a series of novel pH-sensitive sodium alginate/hydroxyapatite (SA/HA) nanocomposite beads was prepared by the in situ generation of HA micro-particles in the beads during the sol–gel transition process of SA. The SA/HA nanocomposites were characterized by Fourier transform IR spectroscopy, X-ray fluorescence spectrometry, scanning electron microscopy and field emission SEM in order to reveal their composition and surface morphology as well as the role that the in situ generated HA micro-particles play. The factors influencing the swelling behavior, drug loading and controlled release behavior of the SA/HA nanocomposite beads were also investigated using diclofenac sodium (DS) as the model drug. The HA micro-particles act as inorganic crosslinkers in the nanocomposites, which could contract and restrict the movability of the SA polymer chains, and then change the surface morphology and decrease the swell ratio. Meanwhile, the entrapment efficiency of DS was improved, and the burst release of DS was overcome. The factors (including concentration of Ca²⁺, reaction time and temperature) affecting the growth of HA micro-particles have a clear influence on the entrapment efficiency and release rate of DS. In this work, the nanocomposite beads prepared under optimum condition could prolong the release of DS for 8 h more compared with the pristine SA hydrogel beads.     

Calcium alginate microcapsules with spherical liquid cores templated by gelatin microparticles for mass production of multicellular spheroids

Multicellular spheroids are important in biomedical applications, such as drug research and regenerative medicine. We developed microcapsules from sodium alginate and gelatin for mass production of size-controlled spheroids with diameters <200 μm. The microcapsules were composed of calcium alginate gels with spherical liquid cores (diameter ≈ 150 μm) for formation of spheroids. The spherical liquid cores were prepared by incubating calcium alginate microcapsules containing thermally gelled, cell-enclosing gelatin microparticles about 150 μm in diameter, at 37 °C. The gelatin microparticles were encapsulated within the microcapsules by dropping a sodium alginate solution containing suspended gelatin microparticles into 100 mM CaCl₂. The enclosed feline renal fibroblast cell line, CRFK, cells showed 93.8% viability immediately after encapsulation, then grew and completely filled the spherical cores. Multicellular spheroids were collected within 1 min by soaking microcapsules in a medium containing alginate lyase.     

Novel silk sericin/gelatin 3-D scaffolds and 2-D films: Fabrication and characterization for potential tissue engineering applications

In this study, we report for the first time the fabrication of novel 3-D sericin/gelatin scaffolds and 2-D films using non-mulberry Antheraea mylitta silk cocoon sericin protein. The matrices were fabricated, biophysically characterized and optimized for cell culture applications. Blended sericin/gelatin 3-D scaffolds were highly porous with an optimum pore size of 170 ± 20 μm. The scaffolds were robust with enhanced mechanical strength and showed high compressibility. Swelling studies showed high swellability along with complete degradation in the presence of phosphate-buffered saline. Cytocompatibility of the matrices was evaluated using feline fibroblasts showing normal spreading and proliferation as assessed by fluorescence microscopy. Cell cycle analysis showed cytocompatibility without any cell cycle arrests. Low immunogenicity of the matrices as observed through tumor necrosis factor α release reveal its potential as future biopolymeric graft material. The results of this novel study lay the foundation for the use of the silk cocoon protein sericin as a biocompatible biopolymer for tissue engineering applications.     

Mechanical properties and dual drug delivery application of poly(lactic-co-glycolic acid) scaffolds fabricated with a poly(β-amino ester) porogen

Polymeric scaffolds that are biocompatible and biodegradable are widely used for tissue engineering applications. Scaffolds can be further enhanced by enabling the release of one or more drugs to stimulate regeneration or for the treatment of a specific disease or condition. In this study, poly(lactic-co-glycolic acid) (PLGA) microspheres were mixed with poly(β-amino ester) (PBAE) particles to create novel hybrid scaffolds capable of dual release of drug and growth factor. Fast-degrading PBAE particles loaded with the drug ketoprofen acted as porogens that provided a rapid 12 h release. The PLGA microspheres were loaded with a growth factor, bone morphogenetic protein 2, and fused together around the porogens to create a slow-degrading matrix that provided sustained release lasting 70 days. Drug release was further tailored by varying the amount of porogen added to the scaffold. Bioactivity measurements demonstrated that the scaffold fabrication technique did not damage the drug or protein. The compressive modulus was affected by the amount of porogen added, extending from 50 to 111 MPa for loadings from 60 to 40% PBAE, and after 5 days of degradation, it decreased to 0.6 to 1.1 kPa when the porogen was gone. PLGA containing a quick-degrading porogen can be used to release two drugs while developing a porous microarchitecture for cell ingrowth with in a matrix capable of maintaining a compressive modulus applicable for soft tissue implants.     

Human bone marrow stem cell-encapsulating calcium phosphate scaffolds for bone repair

Due to its injectability and excellent osteoconductivity, calcium phosphate cement (CPC) is highly promising for orthopedic applications. However, a literature search revealed no report on human bone marrow mesenchymal stem cell (hBMSC) encapsulation in CPC for bone tissue engineering. The aim of this study was to encapsulate hBMSCs in alginate hydrogel beads and then incorporate them into CPC, CPC–chitosan and CPC–chitosan–fiber scaffolds. Chitosan and degradable fibers were used to mechanically reinforce the scaffolds. After 21 days, that the percentage of live cells and the cell density of hBMSCs inside CPC-based constructs matched those in alginate without CPC, indicating that the CPC setting reaction did not harm the hBMSCs. Alkaline phosphate activity increased by 8-fold after 14 days. Mineral staining, scanning electron microscopy and X-ray diffraction confirmed that apatitic mineral was deposited by the cells. The amount of hBMSC-synthesized mineral in CPC–chitosan–fiber matched that in CPC without chitosan and fibers. Hence, adding chitosan and fibers, which reinforced the CPC, did not compromise hBMSC osteodifferentiation and mineral synthesis. In conclusion, hBMSCs were encapsulated in CPC and CPC–chitosan–fiber scaffolds for the first time. The encapsulated cells remained viable, osteodifferentiated and synthesized bone minerals. These self-setting, hBMSC-encapsulating CPC-based constructs may be promising for bone tissue engineering applications.     

Silica-coated calcium pectinate beads for colonic drug delivery

The aim of this work is to develop novel organic–inorganic hybrid beads for colonic drug delivery. For this purpose, calcium pectinate beads with theophylline are prepared by a cross-linking reaction between amidated low-methoxyl pectin and calcium ions. The beads are then covered with silica, starting from tetraethyoxysilane (TEOS), by a sol–gel process. The influence of TEOS concentration (0.25, 0.50, 0.75 and 1.00 M) during the process is studied in order to modulate the thickness of the silica layer around the pectinate beads and thus to control the drug release. The interactions between the silica coating and the organic beads are weak according to the physicochemical characterizations. A good correlation between physicochemical and in-vitro dissolution tests is observed. At concentrations of TEOS beyond 0.25 M, the silica layer is thick enough to act as a barrier to water uptake and to reduce the swelling ratio of the beads. The drug release is also delayed. Silica-coated pectinate beads are promising candidates for sustained drug delivery systems.     

The promotion of chondrogenesis in adipose-derived adult stem cells by an RGD-chimeric protein in 3D alginate culture

The dynamic regulation of integrin-binding peptides is crucial for chondrogenic differentiation. Here, we revealed the feasibility for flexible modification of RGD by embedding a large molecular weight and slightly charged (isoelectric point, 6–6.25) RGD-chimeric protein (CBD–RGD) with cellulose-binding domain (CBD) in three dimensional (3D) alginate beads to evaluate the chondrogenesis of adipose-derived adult stem cells (ADAS). The binding of CBD–RGD with cells and its diffusion from alginate beads were studied on fluorescein isothiocyanate (FITC)-conjugated CBD–RGD. The increases in gene expression (Sox9, Aggrecan, fibronectin and collagen II), accumulation of chondrogenic matrices and decrease of collagen X gene expression during TGF-β3 induction were only observed for those beads containing 10 mg/g CBD–RGD initially, with 20.18 ± 0.73% of that released in a week. The contrary was observed for beads with CBD–RGD 20 mg/g initially and having higher persistence (only 8.6 ± 2.17% released in a week). The 10 mg/g CBD–RGD-mediated enhancement was demonstrated via the activation of integrin α5 and β1-dependent pathway, and especially related to the upregulation of Sox9 gene and the temporary block of fibronectin expression as well as sustained inhibition of RhoA activity in the early differentiation stage. Thus, we speculated that the dynamic mobility of CBD–RGD may account for the enhanced chondrogenesis. It was concluded that the CBD–RGD–alginate culture system promoted the chondrogenesis of mesenchymal stem cells coordinated with TGF-β3 induction in an RGD dose-dependent manner.     

Silk fibroin/poly(vinyl alcohol) photocrosslinked hydrogels for delivery of macromolecular drugs

Hydrogels are three-dimensional polymer networks widely used in biomedical applications as drug delivery and tissue engineered scaffolds to effectively repair or replace damaged tissue. In this paper we demonstrate a newly synthesized cytocompatible and drug releasing photo-crosslinked hydrogel based on poly(vinyl alcohol) methacrylate and silk fibroin which possesses tailorable structural and biological properties. The initial silk fibroin content was 0%, 10%, 20%, 30%, 40% and 50% with respect to the weight of poly(vinyl alcohol) methacrylate. The prepared hydrogels were characterized with respect to morphology, crystallinity, stability, swelling, mass loss and cytotoxicity. FITC-dextrans of different molecular weights were chosen as model drugs molecules for release studies from the hydrogels. The hydrogels containing different silk fibroin percentages showed differences in pore size and distribution. X-ray diffraction analysis revealed that amorphous silk fibroin in poly(vinyl alcohol) methacrylate is crystallized to β-sheet secondary structure upon gelation. The sol fraction increased with increasing fibroin concentration in the co-polymer gel (from 18% to 45%), although the hydrogel extracts were non-cytotoxic. Similarly, the addition of silk fibroin increased water uptake by the gels (from 7% to 21%). FITC-dextran release from the hydrogels was dependent on the silk fibroin content and the molecular weight of encapsulated molecules. The study outlines a newer type of photo-crosslinked interpenetrating polymer network hydrogel that possess immense potential in drug delivery applications.     

Novel thermosensitive calcium alginate microspheres: Physico-chemical characterization and delivery properties

The system described in this paper was obtained by soaking calcium alginate (CaAlg) microspheres in a water solution of poly-[(3-acrylamidopropyl)-trimethylammonium chloride-b-N-isopropylacrylamide] [poly(AMPTMA-b-NIPAAM)], a new block co-polymer recently synthesized by atom transfer radical polymerization (ATRP). The block co-polymer is characterized by a lower critical solution temperature (LCST) of 41 °C in aqueous 0.1 M NaCl solution, and can be anchored on the CaAlg microspheres by means of polyion interactions. Polycations (permanently positively charged blocks) and polyanions (free alginate carboxylic groups) interact, leading to microspheres with thermosensitive properties. As an effect of interaction with the microspheres the LCST of the co-polymer is lowered to 36–38 °C. In this temperature range a colloidal water suspension of the microspheres collapses, forming macroscopic aggregates. The new system shows, at human body temperature, an improved ability to carry and deliver both hydrophobic and hydrophilic molecules in comparison with unmodified CaAlg microspheres. The release properties of the microspheres loaded with different model drugs can be appropriately modulated by the amount of the poly(AMPTMA-b-NIPAAM). Furthermore, the microspheres show the interesting capability of retaining the activity of a loaded enzyme (horseradish peroxidase), used as a model protein. The results obtained indicate that the proposed drug delivery system may be suitable for drug depot applications.     

A novel therapeutic design of microporous-structured biopolymer scaffolds for drug loading and delivery

Three-dimensional (3-D) open-channeled scaffolds of biopolymers are a promising candidate matrix for tissue engineering. When scaffolds have the capacity to deliver bioactive molecules the potential for tissue regeneration should be greatly enhanced. In order to improve drug-delivery capacity, we exploit 3-D poly(lactic acid) (PLA) scaffolds by creating microporosity within the scaffold network. Macroporous channeled PLA with a controlled pore configuration was obtained by a robotic dispensing technique. In particular, a room temperature ionic liquid (RTIL) bearing hydrophilic counter-anions, such as OTf and Cl, was introduced to the biopolymer solution at varying ratios. The RTIL–biopolymer slurry was homogenized by ultrasonication, and then solidified through the robotic dispensing process, during which the biopolymer and RTIL formed a bicontinuous interpenetrating network. After ethanol wash-out treatment the RTIL was completely removed to leave highly microporous open channels throughout the PLA network. The resultant pore size was observed to be a few micrometers (average 2.43 μm) and microporosity was determined to be ∼70%. The microporous surface was also shown to favor initial cell adhesion, stimulating cell anchorage on the microporous structure. Furthermore, in vivo tissue responses assessed in rat subcutaneous tissue revealed good tissue compatibility, with minimal inflammatory reactions, while gathering a larger population of fibroblastic cells than the non-microporous scaffolds, and even facilitating invasion of the cells within the microporous structure. The efficacy of the micropore networks generated within the 3-D scaffolds in loading and releasing therapeutic molecules was addressed using antibiotic sodium ampicillin and protein cytochrome C as model drugs. The microporous scaffolds exhibited significantly enhanced drug loading capacity: 4–5 times increase in ampicillin and 9–10 times increase in cytochrome C compared to the non-microporous scaffolds. The release of ampicillin loaded within the microporous scaffolds was initially fast (∼85% for 1 week), and was then slowed down, showing a continual release up to a month. On the other hand, cytochrome C was shown to release in a highly sustainable manner over a month, without showing an initial burst release effect. This study provides a novel insight into the generation of 3-D biopolymer scaffolds with high performance in loading and delivery of biomolecules, facilitated by the creation of microporous channels through the scaffold network. The capacity to support tissue cells while in situ delivering drug molecules makes the current scaffolds potentially useful for therapeutic tissue engineering.     

Encapsulation of fibroblasts causes accelerated alginate hydrogel degradation

Calcium-alginate hydrogel has been widely studied as a material for cell encapsulation for tissue engineering. At present, the effect that cells have on the degradation of alginate hydrogel is largely unknown. We have shown that fibroblasts encapsulated at a density of 7.5 × 10⁵ cells ml^?1 in both 2% and 5% w/v alginate remain viable for at least 60 days. Rheological analysis was used to study how the mechanical properties exhibited by alginate hydrogel changed during 28 days in vitro culture. Alginate degradation was shown to occur throughout the study but was greatest within the first 7 days of culture for all samples, which correlated with a sharp release of calcium ions from the construct. Fibroblasts were shown to increase the rate of degradation during the first 7 days when compared with acellular samples in both 2% and 5% w/v gels, but after 28 days both acellular and cell-encapsulating samples retained disc-shaped morphologies and gel-like spectra. The results demonstrate that although at an early stage cells influence the mechanical properties of encapsulating alginate, over a longer period of culture, the hydrogels retain sufficient mechanical integrity to exhibit gel-like properties. This allows sustained immobilization of the cells at the desired location in vivo where they can produce extracellular matrix and growth factors to expedite the healing process.     

Fabrication and characterization of monodisperse PLGA–alginate core–shell microspheres with monodisperse size and homogeneous shells for controlled drug release

Monodisperse PLGA–alginate core–shell microspheres with controlled size and homogeneous shells were first fabricated using capillary microfluidic devices for the purpose of controlling drug release kinetics. Sizes of PLGA cores were readily controlled by the geometries of microfluidic devices and the fluid flow rates. PLGA microspheres with sizes ranging from 15 to 50 μm were fabricated to investigate the influence of the core size on the release kinetics. Rifampicin was loaded into both monodisperse PLGA microspheres and PLGA–alginate core–shell microspheres as a model drug for the release kinetics studies. The in vitro release of rifampicin showed that the PLGA core of all sizes exhibited sigmoid release patterns, although smaller PLGA cores had a higher release rate and a shorter lag phase. The shell could modulate the drug release kinetics as a buffer layer and a near-zero-order release pattern was observed when the drug release rate of the PLGA core was high enough. The biocompatibility of PLGA–alginate core–shell microspheres was assessed by MTT assay on L929 mouse fibroblasts cell line and no obvious cytotoxicity was found. This technique provides a convenient method to control the drug release kinetics of the PLGA microsphere by delicately controlling the microstructures. The obtained monodisperse PLGA–alginate core–shell microspheres with monodisperse size and homogeneous shells could be a promising device for controlled drug release.     

Reduced liver cell death using an alginate scaffold bandage: A novel approach for liver reconstruction after extended partial hepatectomy

Extended partial hepatectomy may be needed in cases of large hepatic mass, and can lead to fulminant hepatic failure. Macroporous alginate scaffold is a biocompatible matrix which promotes the growth, differentiation and long-term hepatocellular function of primary hepatocytes in vitro. Our aim was to explore the ability of implanted macroporous alginate scaffolds to protect liver remnants from acute hepatic failure after extended partial hepatectomy. An 87% partial hepatectomy (PH) was performed on C57BL/6 mice to compare non-treated mice to mice in which alginate or collagen scaffolds were implanted after PH. Mice were scarified 3, 6, 24 and 48 h and 6 days following scaffold implantation and the extent of liver injury and repair was examined. Alginate scaffolds significantly increased animal survival to 60% vs. 10% in non-treated and collagen-treated mice (log rank = 0.001). Mice with implanted alginate scaffolds manifested normal and prolonged aspartate aminotransferases and alanine aminotransferases serum levels as compared with the 2- to 20-fold increase in control groups (P < 0.0001) accompanied with improved liver histology. Sustained normal serum albumin levels were observed in alginate-scaffold-treated mice 48 h after hepatectomy. Incorporation of BrdU-positive cells was 30% higher in the alginate-scaffold-treated group, compared with non-treated mice. Serum IL-6 levels were significantly decreased 3 h post PH. Biotin-alginate scaffolds were quickly well integrated within the liver tissue. Collectively, implanted alginate scaffolds support liver remnants after extended partial hepatectomy, thus eliminating liver injury and leading to enhanced animal survival after extended partial hepatectomy.     

Characterization of dielectrophoresis-aligned nanofibrous silk fibroin–chitosan scaffold and its interactions with endothelial cells for tissue engineering applications

Aligned three-dimensional nanofibrous silk fibroin–chitosan (eSFCS) scaffolds were fabricated using dielectrophoresis (DEP) by investigating the effects of alternating current frequency, the presence of ions, the SF:CS ratio and the post-DEP freezing temperature. Scaffolds were characterized with polarized light microscopy to analyze SF polymer chain alignment, atomic force microscopy (AFM) to measure the apparent elastic modulus, and scanning electron microscopy and AFM to analyze scaffold topography. The interaction of human umbilical vein endothelial cells (HUVECs) with eSFCS scaffolds was assessed using immunostaining to assess cell patterning and AFM to measure the apparent elastic modulus of the cells. The eSFCS (50:50) samples prepared at 10 MHz with NaCl had the highest percentage of aligned area as compared to other conditions. As DEP frequency increased from 100 kHz to 10 MHz, fibril sizes decreased significantly. eSFCS (50:50) scaffolds fabricated at 10 MHz in the presence of 5 mM NaCl had a fibril size of 77.96 ± 4.69 nm and an apparent elastic modulus of 39.9 ± 22.4 kPa. HUVECs on eSFCS scaffolds formed aligned and branched capillary-like vascular structures. The elastic modulus of HUVEC cultured on eSFCS was 6.36 ± 2.37 kPa. DEP is a potential tool for fabrication of SFCS scaffolds with aligned nanofibrous structures that can guide vasculature in tissue engineering and repair.