Electrically polarized HAp-coated Ti: In vitro bone cell–material interactions

Electrically polarized bulk sintered hydroxyapatite (HAp) compacts have been shown to accelerate mineralization and bone tissue ingrowth in vivo. In this work, a comprehensive study has been carried out to investigate the influence of surface charge and polarity on in vitro bone cell adhesion, proliferation and differentiation on electrically polarized HAp-coated Ti. Uniform and crack free sol–gel derived HAp coatings of 20 ± 1.38 μm thickness were polarized by application of an external d.c. field of 2.0 kV cm^?1 at 400 °C for 1h. In vitro bioactivity of polarized HAp coatings was evaluated by soaking in simulated body fluid, and bone cell–material interactions were studied by culturing with human fetal osteoblast cells (hFOB) for a maximum period of 11 days. Scanning electron microscopic observation showed that accelerated mineralization on negatively charged surfaces favored rapid cell attachment and faster tissue ingrowth over non-polarized HAp coating surfaces, while positive charge on HAp coating surfaces restricted apatite nucleation with limited cellular response. Immunochemistry and confocal microscopy confirmed that the cell adhesion and early stage differentiation were more pronounced on negatively charged coating surfaces as hFOB cells expressed higher vinculin and alkaline phosphatase proteins on negatively charged surface compared to cells grown on all other surfaces. Our results in this study are process independent and potentially applicable to any other commercially available coating techniques.     

Hybrid hydroxyapatite nanoparticles-loaded PCL/GE blend fibers for bone tissue engineering

In order to augment bone formation, a new biodegradable scaffold system was fabricated using different ratios of hydroxyapatite (HAp) blended with synthetic polymer polycaprolactone (PCL) and natural polymer gelatin (GE) followed by electrospinning method. Three different concentrations of HAp were used in PCL/GE to obtain a blend of 10, 30, and 50% (w/v) HAp–PCL/GE. These HAp-loaded PCL/GE blends were then compared with PCL/GE blends by different mechanical and biological in vitro and in vivo studies to understand the applicability of the system. Scanning electron microscopy, X-ray diffraction analysis, and tensile strength measurement were done to obtain physical properties. Fifty Percent HAp–PCL/GE blends possessed the highest mechanical strength. In vitro cytotoxicity and proliferation of osteoblast cells on the PCL/GE and HAp–PCL/GE scaffolds were examined and shown that addition of HAp in PCL/GE was beneficial by increasing cell viability (>85%) proliferation and cell-surface attachment. Expression of collagen and osteopontin was also found higher in 50% HAp–PCL/GE blends than the others. On the other hand, in vivo bone formation was examined using rat models and increased bone formation was observed in 50% HAp–PCL/GE blends within 6?weeks. Based on the combined results of this study, HAp–PCL/GE membranes were found to hold great promise for use in tissue engineering applications, especially in bone tissue engineering.     

Improvement of mechanical strength and osteogenic potential of calcium sulfate-based hydroxyapatite 3-dimensional printed scaffolds by ε-polycarbonate coating

Powder-based three-dimensional (3D) printing is an excellent method to fabricate complex-shaped scaffolds for tissue engineering. However, their lower mechanical strength restricts their application in bone tissue engineering. Here, we created a 3D-printed scaffold coated with a ε-polycaprolactone (PCL) polymer solution (5 and 10 w/v %) to improve the mechanical strength of the scaffold. The 3D scaffold was fabricated from calcium sulfate hemihydrate powder (CaSO₄-1/2 H₂O), transformed into hydroxyapatite (HAp) by treatment with a hydrothermal reaction in an NH₄H₂PO₄ solution. The surface properties and composition of the scaffold were evaluated using scanning electron microscopy and X-ray diffraction analysis. We demonstrated that the 3D scaffold coated with PCL had an improved mechanical modulus. Coating with 5 and 10% PCL increased the compressive strength significantly, by about 2-fold and 4-fold, respectively, compared with that of uncoated scaffolds. However, the porosity was reduced significantly by coating with 10% PCL. In vitro biological evaluation demonstrated that MG-63 cells adhered well and proliferated on the 3D scaffold coated with PCL, and the scaffold was not cytotoxic. In addition, alkaline phosphatase activity and real time polymerase chain reaction demonstrated that osteoblast differentiation also improved in the PCL-coated 3D scaffolds. These results indicated that PCL polymer coating could improve the compressive strength and biocompatibility of 3D HAp scaffolds for bone tissue engineering applications.     

Flow perfusion culture induces the osteoblastic differentiation of marrow stroma cell-scaffold constructs in the absence of dexamethasone

Flow perfusion culture of scaffold/cell constructs has been shown to enhance the osteoblastic differentiation of rat bone marrow stroma cells (MSCs) over static culture in the presence of osteogenic supplements including dexamethasone. Although dexamethasone is known to be a powerful induction agent of osteoblast differentiation in MSC, we hypothesied that the mechanical shear force caused by fluid flow in a flow perfusion bioreactor would be sufficient to induce osteoblast differentiation in the absence of dexamethasone. In this study, we examined the ability of MSCs seeded on titanium fiber mesh scaffolds to differentiate into osteoblasts in a flow perfusion bioreactor in both the presence and absence of dexamethasone. Scaffold/cell constructs were cultured for 8 or 16 days and osteoblastic differentiation was determined by analyzing the constructs for cellularity, alkaline phosphatase activity, and calcium content as well as media samples for osteopontin. For scaffold/cell constructs cultured under flow perfusion, there was greater scaffold cellularity, alkaline phosphatase activity, osteopontin secretion, and calcium deposition compared with static controls, even in the absence of dexamethasone. When dexamethasone was present in the cell culture medium under flow perfusion conditions, there was further enhancement of osteogenic differentiation as evidenced by lower scaffold cellularity, greater osteopontin secretion, and greater calcium deposition. These results suggest that flow perfusion culture alone induces osteogenic differentiation of rat MSCs and that there is a synergistic effect of enhanced osteogenic differentiation when both dexamethasone and flow perfusion culture are used.     

The osteogenic differentiation of rat bone marrow stromal cells cultured with dexamethasone-loaded carboxymethylchitosan/poly(amidoamine) dendrimer nanoparticles

There is an increasing interest in developing novel macromolecular vehicles for the intracellular and controlled delivery of bioactive molecules, since they can allow modulation of the cellular functions in a more effective manner ex vivo, and maintain the cellular phenotype in vivo upon re-implantation. The present study was designed to investigate the effect of combining novel dexamethasone-loaded carboxymethylchitosan/poly(amidoamine) dendrimer (Dex-loaded CMCht/PAMAM) nanoparticles and, both HA and SPCL scaffolds (3D system) on the proliferation and osteogenic differentiation of rat bone marrow stromal cells (RBMSCs) in vitro. A luminescent cell viability assay using RBMSCs was performed for screening cytotoxicity of the developed HA and SPCL scaffolds. Results corroborated previous ones which have demonstrated in vitro, the superior performance of the HA and SPCL scaffolds on supporting cells adhesion and proliferation. Furthermore, this work showed that RBMSCs seeded onto the surface of both HA and SPCL scaffolds differentiate into osteoblasts when cultured in the presence of 0.01 mg ml^?1 Dex-loaded CMCht/PAMAM dendrimer nanoparticles. In addition, results demonstrated that Dex-loaded CMCht/PAMAM dendrimer nanoparticles combined with the HA enhance osteogenesis by increasing ALP activity and mineralization of the extra-cellular matrix. The pre-incubation of stem cells with these kinds of nanoparticles allows the delivery of Dex inside the cells and directly influences their cellular fate, being a promising new tool to be used in cells and tissue engineering strategies.     

Effect of temporally patterned TNF-α delivery on in vitro osteogenic differentiation of mesenchymal stem cells cultured on biodegradable polymer scaffolds

Recent insight into the critical role of pro-inflammatory cytokines, particularly tumor necrosis factor-α (TNF-α), in bone regeneration has heralded a new direction in the design of tissue engineering constructs. Previous studies have demonstrated that continuous delivery of 50?ng/ml TNF-α to mesenchymal stem cells (MSCs) cultured on three-dimensional (3D) biodegradable electrospun poly(?-caprolactone) (PCL) microfiber meshes stimulates mineralized matrix deposition, a marker of osteogenic differentiation. Since TNF-α exhibits a biphasic pattern of expression following bone fracture in vivo, this study aimed to investigate the effects of temporal patterns of TNF-α delivery on in vitro osteogenic differentiation of MSCs cultured on 3D electrospun PCL scaffolds. MSCs were cultured for 16?days and exposed to continuous, early, intermediate, or late TNF-α delivery. To further elucidate the effects of TNF-α on osteogenic differentiation, the study design included MSCs precultured both in the presence and absence of typically required osteogenic supplement dexamethasone. Mineralized matrix deposition was not observed in constructs with dexamethasone-naïve MSCs, suggesting that TNF-α is not sufficient to trigger in vitro osteogenic differentiation of MSCs. For MSCs precultured with dexamethasone, TNF-α suppressed alkaline phosphatase activity, an early marker of osteogenic differentiation, and stimulated mineralized matrix deposition, a late stage marker of MSC osteogenic differentiation. By elucidating the impact of temporal variations in TNF-α delivery on MSC osteogenic differentiation, our results offer insight into the regenerative mechanism of TNF-α and provide the design parameters for a novel tissue engineering strategy that rationally controls TNF-α signaling to stimulate bone regeneration.     

Synergistic effects of dual Zn/Ag ion implantation in osteogenic activity and antibacterial ability of titanium

Zinc (Zn) and silver (Ag) are co-implanted into titanium by plasma immersion ion implantation. A Zn containing film with Ag nanoparticles (Ag NPs) possessing a wide size distribution is formed on the surface and the corrosion resistance is improved due to the micro-galvanic couples formed by the implanted Zn and Ag. Not only are the initial adhesion, spreading, proliferation and osteogenic differentiation of rBMSCs observed from the Zn/Ag implanted Ti in vitro, but also bacteria killing is achieved both in vitro and in vivo. Electrochemical polarization and ion release measurements suggest that the excellent osteogenic activity and antibacterial ability of the Zn/Ag co-implanted titanium are related to the synergistic effect resulting from the long-range interactions of the released Zn ions and short-range interactions of the embedded Ag NPs. The Zn/Ag co-implanted titanium offers both excellent osteogenic activity and antibacterial ability and has large potential in orthopedic and dental implants.     

Nanoparticle delivery of stable miR-199a-5p agomir improves the osteogenesis of human mesenchymal stem cells via the HIF1a pathway

Elucidating the regulatory mechanisms of osteogenesis of human mesenchymal stem cell (hMSC) is important for the development of cell therapies for bone loss and regeneration. Here we showed that hsa-miR-199a-5p modulated osteogenic differentiation of hMSCs at both early and late stages through HIF1a pathway. hsa-miR-199a expression was up-regulated during osteogenesis for both of two mature forms, miR-199a-5p and -3p. Over-expression of miR-199a-5p but not -3p enhanced differentiation of hMSCs in vitro, whereas inhibition of miR-199a-5p reduced the expression of osteoblast-specific genes, alkaline phosphatase (ALP) activity, and mineralization. Furthermore, over-expression of miR-199a enhanced ectopic bone formation in vivo. Chitosan nanoparticles were used for delivery of stable modified hsa-miR-199a-5p (agomir) both in vitro and in vivo, as a proof-of-concept for stable agomir delivery on bone regeneration. The hsa-mir199a-5p agomir were mixed with Chitosan nanoparticles to form nanoparticle/hsa-mir199a-5p agomir plasmid (nanoparticle/agomir) complexes, and nanoparticle/agomir complexes could improve the in vivo regeneration of bone. Further mechanism studies revealed that hypoxia enhanced osteogenesis at early stage and inhibited osteogenesis maturation at late stage through HIF1a-Twist1 pathway. At early stage of differentiation, hypoxia induced HIF1a-Twist1 pathway to enhance osteogenesis by up-regulating miR-199a-5p, while at late stage of differentiation, miR-199a-5p enhanced osteogenesis maturation by inhibiting HIF1α-Twist1 pathway.     

Fabrication and characterization of chitosan/OGP coated porous poly(ε-caprolactone) scaffold for bone tissue engineering

As one of the stimulators on bone formation, osteogenic growth peptide (OGP) improves both proliferation and differentiation of the bone cells in vitro and in vivo. The aim of this work was the preparation of three dimensional porous poly(ε-caprolactone) (PCL) scaffold with high porosity, well interpore connectivity, and then its surface was modified by using chitosan (CS)/OGP coating for application in bone regeneration. In present study, the properties of porous PCL and CS/OGP coated PCL scaffold, including the microstructure, water absorption, porosity, hydrophilicity, mechanical properties, and biocompatibility in vitro were investigated. Results showed that the PCL and CS/OGP-PCL scaffold with an interconnected network structure have a porosity of more than 91.5, 80.8%, respectively. The CS/OGP-PCL scaffold exhibited better hydrophilicity and mechanical properties than that of uncoated PCL scaffold. Moreover, the results of cell culture test showed that CS/OGP coating could stimulate the proliferation and growth of osteoblast cells on CS/OGP-PCL scaffold. These finding suggested that the surface modification could be a effective method on enhancing cell adhesion to synthetic polymer-based scaffolds in tissue engineering application and the developed porous CS/OGP-PCL scaffold should be considered as alternative biomaterials for bone regeneration.     

Enhanced osteointegration on tantalum-implanted polyetheretherketone surface with bone-like elastic modulus

Polyetheretherketone (PEEK) possesses a similar elastic modulus as bones but yet suffers from bio-inertness and poor osteogenesis. In this work, tantalum ions are implanted energetically into PEEK by plasma immersion ion implantation (PIII) to form Ta₂O₅ nanoparticles in the near surface. Nanoindentation reveals that the surface elastic modulus of the Ta ion implanted PEEK is closer to that of human cortical bones. In vitro cell adhesion, alkaline phosphatase activity, collagen secretion, extracellular matrix mineralization, and real-time PCR analyses disclose enhanced adhesion, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells (bMSCs) on the Ta-PIII modified PEEK. In vivo evaluation of the cortico-cancellous rat femur model by means of micro-CT, sequential fluorescent labeling, and histological analysis after 8 weeks confirms significantly improved osteointegration. The bone-like elastic modulus and modified surface topography of the Ta-PIII modified PEEK synergistically induce osteogenic differentiation of bMSCs and the surface-modified materials have large potential in dental and orthopedic implants.     

Osteogenic differentiation of human bone marrow stromal cells in hydroxyapatite-loaded microsphere-based scaffolds

Calcium-based minerals have consistently been shown to stimulate osteoblastic behavior in vitro and in vivo. Thus, use of such minerals in biomaterial applications has become an effective method to enhance bone tissue engineered constructs. In the present study, for the first time, human bone marrow stromal cells (hBMSC) were osteogenically differentiated on scaffolds consisting only of hydroxyapatite (HAp)-loaded poly(D,L-lactic acid-co-glycolic acid) (PLGA) microspheres of high monodispersity. Scaffold formulations included 0, 5, 10, and 20 wt% Hap, and the hBMSC were cultured for 6 weeks. Results demonstrated suppression of some osteogenic genes during differentiation in the HAp group, but higher end-point glycosaminoglycan and collagen content in 10% and 20% HAp samples, as evidenced by biochemical tests, histology, and immunohistochemistry. After 6 weeks of culture, constructs with 0% and 5% HAp had average compressive moduli of 0.7 ± 0.2 and 1.5 ± 0.9 kPa, respectively, whereas constructs with 10% and 20% HAp had higher average moduli of 17.6 ± 4.6 and 18.9 ± 8.1 kPa, respectively. The results of this study indicate that HAp inclusion in microsphere-based scaffolds could be implemented as a physical gradient in combination with bioactive signal gradients seen in previous iterations of these microsphere-based scaffolds to enhance osteoconduction and mechanical integrity of a healing site.     

The nanoscale geometry of TiO2 nanotubes influences the osteogenic differentiation of human adipose-derived stem cells by modulating H3K4 trimethylation

Nanostructured materials can direct stem cell lineage commitment solely by their various, but controllable, geometric cues, which would be very important for their future application in bone tissue engineering and bone regeneration. However, the mechanisms by which nano-geometric cues dictate the osteogenic differentiation of stem cells remain unclear. Epigenetics is central to cellular differentiation, a process that regulates heritable and long-lasting alterations in gene expression without changing the DNA sequence. Here, we explored the varied osteogenic behaviors of human adipose-derived stem cells (hASCs) on titanium dioxide (TiO₂) nanotube arrays of different diameters. Both in vitro and in vivo studies demonstrated that the nanoscale geometry influenced cellular differentiation and TiO₂ nanotubes with a diameter of 70 nm was the optimal dimension for the osteogenic differentiation of hASCs. Moreover, we observed that TiO₂ nanotubes promoted the osteogenic differentiation of hASCs by upregulating methylation level of histone H3 at lysine 4 (H3K4) in the promoter regions of osteogenic genes Runx2 and osteocalcin, by inhibiting demethylase retinoblastoma binding protein 2 (RBP2). These results revealed, for the first time, the epigenetic mechanism by which nanotopography directs stem cell fate.     

Evaluation of the osteoinductive potential of a bio-inspired scaffold mimicking the osteogenic niche for bone augmentation

Augmentation of regenerative osteogenesis represents a premier clinical need, as hundreds of thousands of patients are left with insufficient healing of bony defects related to a host of insults ranging from congenital abnormalities to traumatic injury to surgically-induced deficits. A synthetic material that closely mimics the composition and structure of the human osteogenic niche represents great potential to successfully address this high demand. In this study, a magnesium-doped hydroxyapatite/type I collagen scaffold was fabricated through a biologically-inspired mineralization process and designed to mimic human trabecular bone. The composition of the scaffold was fully characterized by XRD, FTIR, ICP and TGA, and compared to human bone. Also, the scaffold microstructure was evaluated by SEM, while its nano-structure and nano-mechanical properties were evaluated by AFM. Human bone marrow-derived mesenchymal stem cells were used to test the in vitro capability of the scaffold to promote osteogenic differentiation. The cell/scaffold constructs were cultured up to 7 days and the adhesion, organization and proliferation of the cells were evaluated. The ability of the scaffold to induce osteogenic differentiation of the cells was assessed over 3 weeks and the correlate gene expression for classic genes of osteogenesis was assessed. Finally, when tested in an ectopic model in rabbit, the scaffold produced a large volume of trabecular bone in only two weeks, that subsequently underwent maturation over time as expected, with increased mature cortical bone formation, supporting its ability to promote bone regeneration in clinically-relevant scenarios. Altogether, these results confirm a high level of structural mimicry by the scaffold to the composition and structure of human osteogenic niche that translated to faster and more efficient osteoinduction in vivo – features that suggest such a biomaterial may have great utility in future clinical applications where bone regeneration is required.     

Controlling stem cell-mediated bone regeneration through tailored mechanical properties of collagen scaffolds

Mechanical properties of the extracellular matrix (ECM) play an essential role in cell fate determination. To study the role of mechanical properties of ECM in stem cell-mediated bone regeneration, we used a 3D in vivo ossicle model that recapitulates endochondral bone formation. Three-dimensional gelatin scaffolds with distinct stiffness were developed using 1-Ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride (EDC) mediated zero-length crosslinking. The mechanical strength of the scaffolds was significantly increased by EDC treatment, while the microstructure of the scaffold was preserved. Cell behavior on the scaffolds with different mechanical properties was evaluated in vitro and in vivo. EDC-treated scaffolds promoted early chondrogenic differentiation, while it promoted both chondrogenic and osteogenic differentiation at later time points. Both micro-computed tomography and histologic data demonstrated that EDC-treatment significantly increased trabecular bone formation by transplanted cells transduced with AdBMP. Moreover, significantly increased chondrogenesis was observed in the EDC-treated scaffolds. Based on both in vitro and in vivo data, we conclude that the high mechanical strength of 3D scaffolds promoted stem cell mediated bone regeneration by promoting endochondral ossification. These data suggest a new method for harnessing stem cells for bone regeneration in vivo by tailoring the mechanical properties of 3D scaffolds.     

Osteogenic induction of human periodontal ligament fibroblasts under two- and three-dimensional culture conditions

Human periodontal ligament fibroblasts (hPDLF) play a key role in the regeneration of periodontal compartment during guided tissue regeneration procedures. This property is attributed to the progenitor cell subsets residing in the area. The aim of this study was to investigate whether hPDLFs could undergo an osteogenic differentiation under two- and three-dimensional (2D and 3D) culture conditions upon osteogenic induction. hPDLFs were isolated from six healthy donors, cultured, and expanded according to standard protocols. Then, three osteogenic culture conditions (dexamethasone, ascorbic acid, and beta-glycerophosphate) were established: 1) 2D culture as single-cell monolayer, 2) 3D-static culture on mineralized poly(DL-lactic-co-glycolic acid) (PLGA) scaffold, and 3) 3D culture on mineralized PLGA scaffold inside the NASA-approved bioreactor stimulating microgravity conditions. After 21 days of osteogenic induction, the majority of monolayer cultures had undergone differentiation toward osteogenic lineage, as indicated by morphological changes, mineralization assay, and some phenotypical properties. However, immunohistochemistry revealed that the scaffold cultures expressed higher levels of osteogenic marker proteins compared with that of the monolayers. Secondly, hPDLF-PLGA constructs in bioreactor showed an increased expression of osteopontin and osteocalcin compared with that of static 3D culture after 21 days. Results indicate that human periodontal ligament contains a subpopulation of cells capable of undergoing osteogenic differentiation and presumably contributing to regeneration of bone defects in the adjacent area. Human PDLF-seeded mineralized PLGA scaffold in microgravity bioreactor may be used to support osteogenic differentiation in vitro. Thus, this system may offer new potential benefits as a tool for periodontal tissue engineering.     

Periosteally derived osteoblast‐like cells differentiate into chondrocytes in suspension culture in agarose

Pluripotent cells from the periosteal layer adjacent to cortical bone attain an osteoblast‐like phenotype in culture when reaching confluence in monolayer. It is unknown whether such newly differentiated osteoblast‐like cells preserve the chondrogenic potential characteristics for stem cells derived from the periosteum. Primary osteoprogenitor cells derived from bovine metacarpal periosteum were differentiated into alkaline phosphatase‐positive osteoblast‐like cells by an established monolayer culture protocol. After transfer into suspension culture in agarose gels, the cells differentiated into chondrocytes demonstrated by the production of collagen II, but not of collagen I, as well as alkaline phosphatase activity was abated. Contrarily, with continuation of monolayer culture, the cells maintained their osteoblast‐like phenotype and secreted large amounts of collagen I and a minor quantity of collagen III and V. The alkaline phosphatase activity steadily increased during the entire culture period of 2 weeks. Thus, our culture techniques can serve as useful tools to study mechanisms of differentiation by modulating the phenotypic potential of osteogenic cells. The results presented here support the notion that the extracellular environment strongly influences the cell type and its metabolism. Anat Rec 259:124–130, 2000. © 2000 Wiley‐Liss, Inc.