Maxillary sinus floor elevation using a tissue-engineered bone with rhBMP-2-loaded porous calcium phosphate cement scaffold and bone marrow stromal cells in rabbits

The aim of this study was to evaluate the effects of maxillary sinus floor elevation by a tissue-engineered bone complex with recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded porous calcium phosphate cement (CPC) scaffold and bone marrow stromal cells (bMSCs) in rabbits. bMSCs were cultured and osteogenically induced. The osteoblastic differentiation of expanded bMSCs was detected by alkaline phosphatase activity, and calcium deposits in vitro. Thirty-six rabbits were randomly allocated into week 2, 4 and 8 observation groups. At each time point, 24 maxillary sinus floor elevation surgeries in 12 rabbits were performed bilaterally and randomly implanted by (1) CPC materials alone (group A, n = 6), (2) rhBMP-2/CPC composite materials alone (group B, n = 6), (3) CPC/bMSCs complex (group C, n = 6) and (4) rhBMP-2/CPC/bMSCs complex (group D, n = 6). As for maxillary sinus floor elevation, rhBMP-2-loaded CPC could promote new bone formation as compared to CPC, while addition of bMSCs could further enhance its new bone formation and maturity significantly, as detected by histological findings, and fluorochrome labeling. Our data suggested that rhBMP-2/CPC possessed excellent osteoinductive ability, while combining with bMSCs could further promote new bone formation and maturation in maxillary sinus elevation.     

Segmental bone regeneration using a load-bearing biodegradable carrier of bone morphogenetic protein-2

Segmental defect regeneration has been a clinical challenge. Current tissue-engineering approach using porous biodegradable scaffolds to delivery osteogenic cells and growth factors demonstrated success in facilitating bone regeneration in these cases. However, due to the lack of mechanical property, the porous scaffolds were evaluated in non-load bearing area or were stabilized with stress-shielding devices (bone plate or external fixation). In this paper, we tested a scaffold that does not require a bone plate because it has sufficient biomechanical strength. The tube-shaped scaffolds were manufactured from poly(propylene) fumarate/tricalcium phosphate (PPF/TCP) composites. Dicalcium phosphate dehydrate (DCPD) were used as bone morphogenetic protein-2 (BMP-2) carrier. Twenty-two scaffolds were implanted in 5mm segmental defects in rat femurs stabilized with K-wire for 6 and 15 weeks with and without 10 microg of rhBMP-2. Bridging of the segmental defect was evaluated first radiographically and was confirmed by histology and micro-computer tomography (microCT) imaging. The scaffolds in the BMP group maintained the bone length throughout the duration of the study and allow for bridging. The scaffolds in the control group failed to induce bridging and collapsed at 15 weeks. Peripheral computed tomography (pQCT) showed that BMP-2 does not increase the bone mineral density in the callus. Finally, the scaffold in BMP group was found to restore the mechanical property of the rat femur after 15 weeks. Our results demonstrated that the load-bearing BMP-2 scaffold can maintain bone length and allow successfully regeneration in segmental defects.     

RhBMP-2-loaded calcium silicate/calcium phosphate cement scaffold with hierarchically porous structure for enhanced bone tissue regeneration

Calcium phosphate cement scaffold (CPC) has been widely used as bone graft substitutes, but undesirable osteoinductivity and slow degradability greatly hamper their clinic application. To address these problems, a recombinant human bone morphogenetic protein-2 (rhBMP-2)-loaded calcium silicate/calcium phosphate cement scaffold (CSPC) with hierarchical pores was developed in this study. The CSPC scaffold with both interconnected macropores on the order of 200–500 μm and micropores of 2–5 μm was synthesized from CPC and calcium silicate (CS) by a NaCl particulate-leaching method. In vitro cell culture with C2C12 model cells, in vivo ectopic bone formation and rabbit femur cavity defect repair were performed to evaluate the osteogeneic capacity of the CSPC/rhBMP-2 scaffold. CPC, CSPC and CPC/rhBMP-2 scaffolds were parallelly investigated for comparison. The results demonstrated that the hierarchical macro/microporous structure, whether in presence of CS or rhBMP-2, highly favored the adhesion of C2C12 cells and bone in-growth into the CPC-based scaffolds. But, in comparison to the CPC-based scaffolds with CS or rhBMP-2 alone, the CSPC/rhBMP-2 scaffold strongly promoted osteogenic differentiation in vitro and osteogenetic efficacy in vivo. Further studies demonstrated that Si ions derived from CSPC contributed mainly to maintain the conformation of rhBMP-2 and thus stimulate the synergistic action of CS and rhBMP-2 in osteogenic differentiation and osteoinductivity. Additionally, the incorporation of CS was also beneficial for the dissolution of the scaffold. Those results suggest that the CSPC has superior properties for incorporation of rhBMP-2 and our developed CSPC/rhBMP-2 scaffold have great potential for future use in bone tissue regeneration.     

Bone tissue engineering using bone marrow stromal cells and an injectable sodium alginate/gelatin scaffold

To investigate the potential application of bone marrow stromal cells (BMSCs) and an injectable sodium alginate/gelatin scaffold for bone tissue engineering (BTE). The phenotype of osteogenic BMSCs was examined by mineralized nodules formation and type I collagen expression. Cell proliferation was evaluated by MTT assay. The biocompatibility of scaffold and osteogenic cells were examined by hematoxylin and eosin (H&E) staining. Ectopic bone formation as well as closure of rabbit calvarial critical-sized defects following scaffold-cell implantation were analyzed by histological examination and computed tomography (CT) scanning. Spindle-shaped osteogenic cells of high purity were derived from BMSCs. The osteogenic cells and sodium alginate/gelatin (2:3) scaffold presented fine biocompatibility following cross-linking with 0.6% of CaCl(2). After implantation, the scaffold-cell construct promoted both ectopic bone formation and bone healing in the rabbit calvarial critical-sized defect model. Our data demonstrated that the sodium alginate/gelatin scaffold could be a suitable biomaterial for bone engineering, and the scaffold-osteogenic cells construct is a promising alternative approach for the bone healing process.     

Controlled-release of rhBMP-2 carriers in the regeneration of osteonecrotic bone

Untreated osteonecrosis of the hip causes collapse of the femoral head and eventually leads to the development of premature degenerative arthritis. In order to reverse this late complication after the core decompression procedure, we studied three different types of carriers used to entrap recombinant human bone morphogenetic protein-2 (rhBMP-2) in terms of their performance in osteonecrosis regeneration and creeping substitution in Balb/C mice. The rhBMP-2 was loaded into PLGA–HAp microsphere in three different ways. We first verified the therapeutic dose in vitro using D1 and C2C12 cells. Then the individual performance of the three carrier preparations in vivo was examined by soft X-ray observation, histological analysis and immunostaining of bone tissue. In addition, the BMP-2 protein concentration activity in the serum was monitored. The results revealed that the bioactivity of rhBMP-2 released from a carrier with an ideal therapeutic dose was well maintained; this eventually helped to improve the healing and substitution of necrotic bone in vivo. These observations demonstrate that the in vivo performance of these newly developed rhBMP-2 delivery carriers correlates well with their in vitro release profiles. We concluded that sustained controlled-release of rhBMP-2 above a therapeutic dose could not only induce early callus wrapping of the necrotic bone but also produce neovascularization and substitution inside of the dead bone.     

Autogenous bone particle/titanium fiber composites for bone regeneration in a rabbit radius critical-size defect model

Purpose: To explore the effects of autogenous bone particle/titanium fiber composites on repairing segmental bone defects in rabbits. Materials and methods: A model of bilateral radial bone defect was established in 36 New Zealand white rabbits which were randomly divided into 3 groups according to filling materials used for bilaterally defect treatment: in group C, 9 animal bone defect areas were prepared into simple bilateral radius bone defect (empty sham) as the control group; 27 rabbits were used in groups ABP and ABP-Ti. In group ABP, left defects were simply implanted with autogenous bone particles; meanwhile, group ABP-Ti animals had right defects implanted with autogenous bone particle/titanium fiber composites. Animals were sacrificed at 4, 8, and 12 weeks, respectively, after operation. Results: Micro-CT showed that group C could not complete bone regeneration. Bone volume to tissue volume values in group ABP-Ti were better than group ABP. From histology and histomorphometry Groups ABP and ABP-Ti achieved bone repair, the bone formation of group ABP-Ti was better. The mechanical strength of group ABP-Ti was superior to that of other groups. Conclusions: These results confirmed the effectiveness of autologous bone particle/titanium fiber composites for promoting bone regeneration and mechanical strength.     

Enhanced regeneration of critical bone defects using a biodegradable gelatin sponge and beta-tricalcium phosphate with bone morphogenetic protein-2

We examine the osteogenicity of a sponge biomaterial consisting of a biodegradable mixture of gelatin and beta-tricalcium phosphate (betaTCP) that bound bone morphogenetic protein 2 (BMP-2) in critical-sized bone defects in rats. Gelatin-betaTCP sponges containing either phosphate buffered saline or incorporating BMP-2 are implanted into 5 mm diameter bone defects created in rat mandibles. We assess the defects biweekly for 8 weeks following implantation. There is significantly higher osteoinductive activity and significantly more Gla-osteocalcin content at bone-defect healing sites treated with gelatin-betaTCP sponges incorporating BMP-2 than there is in those treated with sponges that did not contain BMP-2. Histologically, new bone that contains bone marrow and that is connected to the original bone almost entirely replaces the regenerated bone. These results show that biodegradable gelatin-betaTCP incorporating BMP-2 is osteogenic enough to promote healing in large bone defects.     

Injectable rhBMP-2-loaded chitosan hydrogel composite: osteoinduction at ectopic site and in segmental long bone defect

Carriers for bone morphogenetic protein-2 (BMP-2) used in clinical practice still suffer from limitations such as insufficient protein retention. In addition, there is a clinical need for injectable carriers. The main objective of this study was to assess bone forming ability of rhBMP-2 combined either with chitosan hydrogel (rhBMP-2/CH) or chitosan hydrogel containing β-tricalcium phosphate (β-TCP) (rhBMP-2/CH/TCP). Formulations were first compared in a rat ectopic intramuscular bone formation model, and the optimal formulation was further evaluated in healing of 15-mm critical size defect in the radius of a rabbit. Three weeks after injection ectopically formed bone was analyzed by microcomputerized tomography (micro-CT) and histology. Significantly higher (4.7-fold) mineralized bone formation was observed in the rhBMP-2/CH/TCP group compared to rhBMP-2/CH group. In a pilot study, defect in a rabbit radius treated with rhBMP-2/CH/TCP showed incomplete regeneration at 8 weeks with composite leakage from the defect, indicating the need for formulation refinement when segmental defect repair is foreseen.     

矿化胶原基材料与BMP－2复合用于兔腰椎横突间融合

目的 用兔的脊柱后路横突间融合模型来评价一种新型的仿生矿化胶原基质：nHAC／PLA复合或不复合生长因子rhBMP-2的骨形成能力。方法64只兔子分为4组：自体髂骨，nHAC／PLA，自体骨 nHAC／PLA，nHAC／PLA BMP-2。术后6周和10周观察。结果自体骨 nHAC／PLA和nHAC／PLA BMP-2与自体骨移植的效果相当。结论nHAC／PLA BMP-2可代替自体骨移植用于骨科手术中。     

Chondrogenesis of rabbit mesenchymal stem cells in fibrin/hyaluronan composite scaffold in vitro

Scaffold material is expected to play a crucial role in induction of chondrogenic differentiation of mesenchymal stem cells (MSCs) for cartilage tissue engineering. Here we demonstrated the feasibility of a fibrin/hyaluronan (HA) composite hydrogel as a potent scaffold for support of chondrogenesis of rabbit MSCs (rMSCs). rMSCs were prepared in three-dimensional cultures of pellet, alginate layer, and fibrin/HA gel. Specimens in each group were cultured in chondrogenic defined media for 4 weeks in the absence or presence of transforming growth factor β1 (TGF-β1) treatment. Viability of rMSCs was somewhat reduced until 4 weeks, which was less significant in fibrin/HA gels than in the alginate layer (*p?相似文献   

Enhanced regeneration of rabbit mandibular defects through a combined treatment of electrical stimulation and rhBMP-2 application

We evaluated the new bone regeneration of a rabbit mandibular defect using hBMSCs under electrical stimulation combined with rhBMP-2 in this study. An inner scaffold prepared by setting a collagen sponge with hBMSCs and hydrogel was placed into a polycaprolactone (PCL) outer box, and an electrical stimulation device was installed between the inner scaffold and the outer box. There were three experimental groups depending on electrical stimulation and application of rhBMP-2. The experimental group was divided into the following three groups. Group 1, in which rhBMP-2 (5 μg/defect) was added to hydrogel and electrical stimulation was not applied; Group 2, in which rhBMP-2 (5 μg/defect) was added as in Group 1 and electrical stimulation was applied; and Group 3, in which electrical stimulation was applied and rhBMP-2 (5 μg/defect) was injected directly into defect site. The delivered electrical stimulation was charge-balanced bi-phasic electric current pulses, and electrical stimulation was conducted for 7 days. The stimulation parameters of the bi-phasic electrical current set at an amplitude of 20 μA, a duration of 100 μs and a frequency of 100 Hz. Four weeks after surgery, new bone formation in each group was evaluated using radiography, histology, and micro-computed tomography (μCT). Groups 2 and 3 exhibited a significant increase in new bone formation compared to Group 1, while Group 3 showed the highest level of new bone regeneration. In a comparison between two groups, Group 2 showed a higher bone volume (BV) by 260 % (p < 0.01) compared with Group 1, and Group 3 showed a higher BV by 442 % (p < 0.01) compared with Group 1. The trend of the bone surface density (ratio of new bone to the real defect volume, BS/TV), trabecular number, and connectivity was identical to that of the BV. The total bone mineral density (BMD) of Groups 2 and 3 showed values higher by the ratios of 103 % (p < 0.01) and 107.5 % (p < 0.01) compared with Group 1, respectively. Part BMD for Groups 2 and 3 showed higher values by the ratios of 104.9 % (p < 0.01) and 122.4 % (p < 0.01) compared with Group 1, respectively. These results suggest that the combined treatment of electrical stimulation, hBMSCs, a collagen sponge, hydrogel, and rhBMP-2 was effective for bone regeneration of large-size mandibular defects. The application of rhBMP-2 with an injection following electrical stimulation demonstrated better efficiency as regards bone regeneration.     

Bone regeneration in a rabbit critical-sized calvarial model using tyrosine-derived polycarbonate scaffolds

Porous three-dimensional tyrosine-derived polycarbonate (TyrPC) scaffolds with a bimodal pore distribution were fabricated to mimic bone architecture using a combination of salt-leaching and phase separation techniques. TyrPC scaffolds degraded in register with bone regeneration during the 6-week study period and compressive moduli of the scaffolds were maintained >0.5 MPa at 6 weeks of incubation in PBS at 37 °C. The TyrPC scaffolds either unsupplemented or supplemented with recombinant human bone morphogenetic protein-2 (rhBMP-2) were implanted in a rabbit calvarial critical-sized defect (CSD) model and the TyrPC scaffolds treated with rhBMP-2 or TyrPC coated with calcium phosphate scaffold alone promoted bone regeneration in a rabbit calvarial CSD at 6 weeks postimplantation. A synthetic TyrPC polymeric scaffold either without a biological supplement or with a minimal dose of rhBMP-2 induced bone regeneration comparable to a commercially available bone graft substitute in a nonrodent CSD animal model.     

Regeneration of skeletal muscle using in situ tissue engineering on an acellular collagen sponge scaffold in a rabbit model

Because of the limited ability of skeletal muscle to regenerate, resection of a large amount of muscle mass often results in incomplete recovery due to nonfunctional scar tissue. The aim of this study was to regenerate skeletal muscle using in situ tissue engineering in a rabbit model. In 18 male rabbits, a muscle defect (1.0 x ~1.0 x ~0.5 cm) was created in the vastus lateralis of both legs. A piece of cross-linked atelocollagen sponge was then inserted into the defect in one leg, whereas the defect in the other leg was left untreated. Both defects were finally covered with fascia. Twenty-four weeks after surgery, the defect that had been filled with the cross-linked atelocollagen sponge scaffold showed mild concavity and slight adhesion to the fascia, while the control side showed severe scar formation and shrinkage. Histologically, the regenerating myofibers at the site containing the collagen sponge were greater in number, diameter, and length than those at the control site. These results indicate that cross-linked atelocollagen sponge has the potential to act as a scaffold for muscle tissue regeneration.     

Bone formation in a long bone defect model using a platelet-rich plasma-loaded collagen scaffold

Platelet-rich plasma (PRP), a platelet concentrate made of autogenous blood, has been used in recent years to improve bone defect healing particularly in maxillofacial reconstructions. The aim of the present study was to assess the effect of PRP on new bone formation in a critical diaphyseal long bone defect. A critical size defect (2.5 cm) in the tibial diaphysis of 16 sheep was supplied either with autogenous PRP in a collagen carrier or with collagen alone (controls). Platelets were enriched about 3.5 fold compared to normal blood in the PRP. After 12 weeks, the explanted bone specimens were quantitatively assessed by X-ray, computed tomography (CT), biomechanical testing and histological evaluation. Bone volume, mineral density, mechanical rigidity and histology of the newly formed bone in the defect did not differ significantly between the PRP treated and the control group, and no effect of PRP upon bone formation was observed. It was suggested that PRP does not enhance new bone formation in a critical size defect with a low regenerative potential. Such bone defects might require more potent stimuli, e.g. combinations of functional biomaterials or autografts, precursor cells or osteoinductive growth factors.     

Bone regeneration using titanium nonwoven fabrics combined with fgf-2 release from gelatin hydrogel microspheres in rabbit skull defects

The objective of this study was to modify titanium nonwoven fabrics (Ti) with a hydroxyapatite (HA)-like coating and fibroblast growth factor (FGF)-2 combination, and evaluate the bone regeneration potential of the modified Ti. Biodegradable gelatin hydrogel microspheres (GM) were prepared as a carrier matrix for the controlled release of FGF-2. Ti, HA-coated Ti (Ti-HA), and Ti-HA incorporating GM (Ti-HA-GM) infused FGF-2 were applied to skull defects of rabbits. Then osteointegration in the Ti was evaluated by alkaline phosphatase activity, Ca(2+) content, and histological observation, and the hemoglobin content was assessed for angiogenic measurement. Ti-HA-GM promoted bone regeneration to a significantly greater extent than Ti, Ti-HA, or mixed Ti-HA and free FGF-2 6 weeks after application, and it also enhanced the hemoglobin content. It is concluded that the combination of HA-like coating and FGF-2 release promotes Ti induction of bone regeneration.     

磷酸钙活性人工骨与自体骨颗粒环抱式植骨治疗四肢骨不连#br#

目的　探讨固化型磷酸钙活性人工骨(CPC/rhBMP-2)与自体骨颗粒环抱式植骨治疗四肢非感染性萎缩型骨不连的临床疗效。 方法　对2013年9月至2017年9月年间治疗的16例四肢非感染性萎缩型骨不连患者进行回顾性分析,其中男12例,女4例;年龄（37.06±16.31）岁（16~67岁）。骨不连部位：下肢11例（胫骨6例、股骨3例、跟骨1例、腓骨1例）,上肢5例（桡骨3例、锁骨1例、手舟骨1例）,所有患者均行断端新鲜化,骨缺损中央植入自体骨颗粒,外周植入CPC/rhBMP-2形成环抱式植骨。术后复查X线片观察骨折愈合情况,记录并发症发生情况,随访患者直到骨折愈合。采用上肢功能障碍评定量表（DASH）、下肢功能量表(LEFS)和SF-12生活质量量表对治疗前、后进行疗效评定。 结果　本组16例均获随访,随访时间（16.93±4.06）月（12~26月）。X片显示全部病例均获得骨性愈合,愈合时间（5.43±2.25）月（3~10月）;术后DASH、LEFS和SF-12评分与术前比较均有统计学差异(P<0.05)。 结论　固化型磷酸钙活性人工骨(CPC/rhBMP-2)和自体骨颗粒环抱式植骨治疗四肢萎缩型骨不连的愈合率及安全性高,疗效可靠。     

Novel composite hyaluronan/type I collagen/fibrin scaffold enhances repair of osteochondral defect in rabbit knee

A new composite scaffold containing type I collagen, hyaluronan, and fibrin was prepared with and without autologous chondrocytes and implanted into a rabbit femoral trochlea. The biophysical properties of the composite scaffold were similar to native cartilage. The macroscopic, histological, and immunohistochemical analysis of the regenerated tissue from cell-seeded scaffolds was performed 6 weeks after the implantation and predominantly showed formation of hyaline cartilage accompanied by production of glycosaminoglycans and type II collagen with minor fibro-cartilage production. Implanted scaffolds without cells healed predominantly as fibro-cartilage, although glycosaminoglycans and type II collagen, which form hyaline cartilage, were also observed. On the other hand, fibro-cartilage or fibrous tissue or both were only formed in the defects without scaffold. The new composite scaffold containing collagen type I, hyaluronan, and fibrin, seeded with autologous chondrocytes and implanted into rabbit femoral trochlea, was found to be highly effective in cartilage repair after only 6 weeks. The new composite scaffold can therefore enhance cartilage regeneration of osteochondral defects, by the supporting of the hyaline cartilage formation.     

Bone regeneration by recombinant human bone morphogenetic protein-2 and a novel biodegradable carrier in a rabbit ulnar defect model

The effects of recombinant human bone morphogenetic protein (rhBMP)-2 and a novel carrier, PLGA-coated gelatin sponge (PGS), on bone defect repair was examined. A 1.5 cm unilateral segmental bone defect was created in the ulnar diaphysis of a Japanese white rabbit. In an initial study, defects were either treated with PGS impregnated with various concentrations of rhBMP-2 (0, 0.1, 0.4 and 1 mg/cm(3)) or left untreated. Defect healing was assessed by radiographic union rate, and biomechanical properties of regenerated bones were determined at 16 weeks postoperatively. In a second study, defects were implanted with PGS with or without rhBMP-2, and histologically observed at postoperative weeks 8 and 16. Radiographic union rate increased the dose-dependently at an early time point. All defects treated with rhBMP-2 (0.4 and 1 mg/cm(3)) were radiographically repaired. Mechanical properties of regenerated bones were restored in a dose-dependent manner. Neither ulnae left untreated nor implanted PGS alone showed radiographic union. Longitudinal alignment of lamellar structure was observed histologically at 16 weeks, indicating that remodeling of regenerated bone was complete. Implanted PGS was almost completely resorbed by 8 weeks, and no abnormalities were observed in the surrounding soft tissue. These results suggest that PGS is a promising carrier for rhBMP-2.     

Knitted poly-lactide-co-glycolide scaffold loaded with bone marrow stromal cells in repair and regeneration of rabbit Achilles tendon

The objectives of this study were to evaluate the morphology and biomechanical function of Achilles tendons regenerated using knitted poly-lactide-co-glycolide (PLGA) loaded with bone marrow stromal cells (bMSCs). The animal model used was that of an adult female New Zealand White rabbit with a 10-mm gap defect of the Achilles tendon. In group I, 19 hind legs with the created defects were treated with allogeneic bMSCs seeded on knitted PLGA scaffold. In group II, the Achilles tendon defects in 19 hind legs were repaired using the knitted PLGA scaffold alone, and in group III, 6 hind legs were used as normal control. The tendon-implant constructs of groups I and II were evaluated postoperatively at 2, 4, 8, and 12 weeks using macroscopic, histological, and immunohistochemical techniques. In addition, specimens from group I (n = 7), group II (n = 7), and group III (n = 6) were harvested for biomechanical test 12 weeks after surgery. Postoperatively, at 2 and 4 weeks, the histology of group I specimens exhibited a higher rate of tissue formation and remodeling as compared with group II, whereas at 8 and 12 weeks postoperation, the histology of both group I and group II was similar to that of native tendon tissue. The wound sites of group I healed well and there was no apparent lymphocyte infiltration. Immunohistochemical analysis showed that the regenerated tendons were composed of collagen types I and type III fibers. The tensile stiffness and modulus of group I were 87 and 62.6% of normal tendon, respectively, whereas those of group II were about 56.4 and 52.9% of normal tendon, respectively. These results suggest that the knitted PLGA biodegradable scaffold loaded with allogeneic bone marrow stromal cells has the potential to regenerate and repair gap defect of Achilles tendon and to effectively restore structure and function.     

Bone regeneration using photocrosslinked hydrogel incorporating rhBMP-2 loaded 2-N, 6-O-sulfated chitosan nanoparticles

Although rhBMP-2 has excellent ability to accelerate the repair of normal bone defects, limitations of its application exist in the high cost and potential side effects. This study aimed to develop a composite photopolymerisable hydrogel incorporating rhBMP-2 loaded 2-N, 6-O-sulfated chitosan nanoparticles (PH/rhBMP-2/NPs) as the bone substitute to realize segmental bone defect repair at a low growth factor dose. Firstly rhBMP-2 loaded 2-N, 6-O-sulfated chitosan nanoparticles (rhBMP-2/NPs) were prepared and characterized by DLS and TEM. Composite materials, PH/rhBMP-2/NPs were developed and investigated by SEM-EDS as well as a series of physical characterizations. Using hMSCs as an in vitro cell model, composite photopolymerisable hydrogels incorporating NPs (PH/NPs) showed good cell viability, cell adhesion and time dependent cell ingrowth. In vitro release kinetics of rhBMP-2 showed a significantly lower initial burst release from the composite system compared with the growth factor-loaded particles alone or encapsulated directly within the hydrogel, followed by a slow release over time. The bioactivity of released rhBMP-2 was validated by alkaline phosphatase (ALP) activity as well as a mineralization assay. In in vivo studies, the PH/rhBMP-2/NPs induced ectopic bone formation in the mouse thigh. In addition, we further investigated the in vivo effects of rhBMP-2-loaded scaffolds in a rabbit radius critical defect by three dimensional micro-computed tomographic (μCT) imaging, histological analysis, and biomechanical measurements. Animals implanted with the composite hydrogel containing rhBMP-2-loaded nanoparticles underwent gradual resorption with more pronounced replacement by new bone and induced reunion of the bone marrow cavity at 12 weeks, compared with animals implanted with hydrogel encapsulated growth factors alone. These data provided strong evidence that the composite PH/rhBMP-2/NPs are a promising substitute for bone tissue engineering.