The sealing ability of an epoxy resin root canal sealer used with five gutta-percha obturation techniques

The purpose of the present study was to evaluate the apical sealing ability of an epoxy resin root canal sealer (AH-26) when used with different gutta-percha obturation techniques (i.e. cold lateral condensation, warm vertical condensation, hybrid condensation) and with Thermafil and Soft-Core obturators. Straight single-rooted teeth with mature apices were prepared according to the crown-down/step-back technique and divided in five groups of 45 teeth and one group of 12 control teeth. After root canal filling 15 teeth of each group were kept for 1 day, another 15 teeth for 1 week, and another 15 teeth for 4 months at 37 degrees C in vacutainers in 80% relative humidity. The 237 teeth were immersed in india ink for 90 hours, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at x6 magnification. It became clear that leakage occurred whatever technique was combined with AH26 and that leakage increased with time. The amount of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all other 4 gutta-percha obturation techniques combined with AH26. In this respect, the hybrid gutta-percha condensation technique turned out to be superior to the four other condensation techniques.     

The sealing ability of an epoxy resin root canal sealer used with five gutta-percha obturation techniques

Abstract – The purpose of the present study was to evaluate the apical sealing ability of an epoxy resin root canal sealer (AH-26) when used with different gutta-percha obturation techniques (i.e. cold lateral condensation, warm vertical condensation, hybrid condensation) and with Thermafil and Soft-Core obturators. Straight single-rooted teeth with mature apices were prepared according to the crown-down/step-back technique and divided in five groups of 45 teeth and one group of 12 control teeth. After root canal filling 15 teeth of each group were kept for 1 day, another 15 teeth for 1 week, and another 15 teeth for 4 months at 37 °C in vacutainers in 80% relative humidity. The 237 teeth were immersed in india ink for 90 hours, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at ×6 magnification. It became clear that leakage occurred whatever technique was combined with AH26 and that leakage increased with time. The amount of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all other 4 gutta-percha obturation techniques combined with AH26. In this respect, the hybrid gutta-percha condensation technique turned out to be superior to the four other condensation techniques.     

The long-term sealing ability of an epoxy resin root canal sealer used with five gutta percha obturation techniques

AIM: The aim of the present study was to evaluate the long-term sealing ability (both apical and coronal) of an epoxy resin root canal sealer (AH26) when used with different gutta-percha obturation techniques. METHODOLOGY: Straight single-rooted teeth with mature apices were divided into 10 groups of 75 teeth and one group of 40 control teeth. Root canals were prepared according to the crown-down/step-back technique and using both 2.5% sodium hypochlorite and an EDTA paste. Root canals were obturated using cold lateral condensation, warm vertical condensation and hybrid condensation of gutta-percha; and with Thermafil and Soft-Core obturators. AH26 was used as the sealer in all cases. After root canal filling, each group was divided into five individual groups of 15 teeth. The first group of 15 teeth was kept for 1 day, the second for 1 week, the third for 4 months, the fourth for 6 months and the fifth for 12 months at 37 degrees C in vacutainers in 80% relative humidity. The teeth were immersed in India ink for 90 h, each root was split and sectioned longitudinally, and the maximum extent of leakage was measured using a stereomicroscope at x6 magnification. RESULTS: Leakage occurred whatever filling technique was combined with AH26. The number of teeth with gross leakage increased with time up to 4 months, but did not appear to increase between 6 and 12 months storage. The degree of apical leakage and the number of leaking teeth in the Soft-Core obturator groups was significantly higher than all four other gutta-percha obturation techniques. Up to 4 months the degree of coronal leakage and the number of leaking teeth in the Thermafil groups was significantly higher than the other gutta-percha obturation techniques, except for Soft-Core. In the Soft-Core obturator groups the degree of coronal leakage and the number of leaking teeth was significantly higher than the other gutta-percha obturation techniques, except for Thermafil at all evaluation times. CONCLUSION: The hybrid gutta-percha condensation technique was superior to the other four obturation techniques in respect of apical leakage. Coronal leakage was significantly greater during the first 4 months for the Thermafil system as compared to the three condensation techniques; coronal leakage was significantly greater at all time periods for the Soft-Core system. There were no significant differences between the Thermafil and the Soft-core system.     

Apical sealing ability of 2 epoxy resin-based sealers used with root canal obturation techniques based on warm gutta-percha compared to cold lateral condensation.

OBJECTIVE: To evaluate the apical sealing ability of 2 epoxy resin-based root canal sealers used with 2 different warm gutta-percha obturation techniques and cold lateral condensation. METHOD AND MATERIALS: The root canals of 72 freshly extracted single-root incisors were prepared and randomly assigned to 6 experimental groups. Root canal fillings were performed using either cold lateral condensation, warm vertical condensation, or Thermafil obturators with EndoRez or AH Plus as sealer. After root canal filling, the teeth were stored in 5% methylene blue solution for 7 days. Linear dye penetration was measured in bisected specimens by a calibrated investigator using a light microscope. RESULTS: Statistical analysis revealed significantly higher penetration depths in groups where EndoRez was used (P < .05, Tukey test). Regarding the different obturation techniques, the least amount of dye penetration was observed for AH Plus and EndoRez when warm vertical condensation was used. CONCLUSION: The results of this study indicate that the apical sealing ability of EndoRez is not as effective as that of AH Plus. Thermafil obturators and warm vertical condensation achieved seals with low dye penetration depth. The use of these techniques might decrease the risk of apical leakage.     

���ָ��ܳ���������������Ƚ��о�

目的对比评价三种根管充填技术的根尖封闭能力。方法收集2011年10月至2012年5月中国医科大学附属口腔医院口腔颌面外科门诊因正畸或牙周病拔除的新鲜离体单根管牙34颗,根管清理后用机用ProTaDer镍钛锉经Crown—Down技术预备,然后随机分为A、B、C三组。A组（11颗）采用冷牙胶侧方加压充填技术充填根管,B组（10颗）采用超声侧方加压充填技术充填根管,c组（13颗）采用连续波热牙胶垂直充填技术充填根管。所有实验牙均使用AHPlus根充糊剂。根管充填后的各组实验牙采用染料渗透法检测根尖微渗漏的发生情况,体式显微镜下测量自根尖孔向冠方的染料渗透长度,采用SPSS11．5统计软件包对测量数据进行分析。结果A组与B、c组的根尖微渗漏数值间差异有统计学意义（P〈0．05）,B组与c组的根尖微渗漏数值间差异无统计学意义（P〉0．05）。结论超声侧方加压充填技术和连续波热牙胶垂直充填技术的根管封闭能力优于冷牙胶侧方加压技术,而前两种充填技术的根管封闭能力无明显差别。     

AH plus和iRoot SP用于热牙胶充填的根尖封闭性能研究

目的 利用体外模型比较热牙胶充填时,2种根管封闭剂AH plus和iRoot SP的根尖微渗漏情况,评估两种材料的根尖封闭性能.方法 离体牙30颗,根管预备后,随机分为2个实验组A和B,1个阳性对照组(C)和1个阴性对照组(D).其中实验组每组10颗离体牙,对照组每组5颗离体牙.分别选用AH plus(A组)和iRoo...     

Comparison of the sealing ability of four obturation techniques

This study compared the apical seal produced by four obturation techniques. The Canal Finder system was compared with lateral condensation, the Ultrafil system, and the sectional warm gutta-percha techniques. Forty-two anterior single-rooted teeth were instrumented. Ten teeth were not obturated and served as positive and negative controls. The apical seal was tested for leakage with 0.25% methylene blue dye. The teeth were shaved horizontally and dye penetration was measured with a Boley gauge. Results revealed there was no statistically significant difference among the four obturation techniques.     

热牙胶根管充填技术研究进展

热牙胶根管充填技术是目前研究较多、运用较广的根管充填技术，其种类大致包括：热牙胶加压、机械热压、超声震动热压、热塑牙胶注射、固核载体插入等充填技术。本文对这些技术的原理、改良和优缺点作一综述，为临床选用提供参考。     

A comparison of three gutta-percha obturation techniques to replicate canal irregularities

A split-tooth model with artificially created intracanal wall defects was used to compare three gutta-percha (GP) obturation techniques, cold lateral, warm lateral, and warm vertical. The techniques were evaluated and compared based on defect replication quality as a function of defect location and size. The obturations were evaluated on an ordinal scale, 0 to 4, based on how much each defect was replicated. There was a statistically significantly better result with both warm techniques compared to cold lateral obturation, while there was no significant difference between the warm obturation techniques.     

Limited ability of three commonly used thermoplasticized gutta-percha techniques in filling oval-shaped canals

The present study was designed to compare the percentage of gutta-percha-filled area (PGFA) achieved in oval-shaped canals after filling by 3 thermoplasticized techniques. Eighty-seven oval-shaped root canals were prepared and root-filled as follows: lateral condensation (n = 20), thermomechanical compaction (n = 20), wave of condensation (n = 20), and Thermafil system (n = 20). A cross section of each tooth was made 5 mm from the apex, and the samples were prepared for microscopic analysis. Digital image measurements of the cross-sectioned area of the canal and the gutta-percha were performed, and the PGFA was calculated. Nonparametric statistical analysis was performed with the Kruskal-Wallis H test and post hoc Dunn test. Overall, PGFAs were variable among the experimental groups, ranging from 37.1%-98.5%, and the pooled data from all techniques had a general mean of 69.6% +/- 18%. Thermafil system, wave of condensation, and thermomechanical compaction produced significantly higher PGFAs than lateral condensation (P < .05); however, no significant differences among these techniques were detected (P > .05). Therefore, a limited ability to fill oval-shaped canals was achieved in the 3 thermoplasticized techniques tested.     

The sealing ability of injection-moulded thermoplasticized gutta-percha

The root canals of 120 single rooted teeth were prepared with files and then divided randomly into twelve subgroups. Four operators each filled three of these subgroups, one group with laterally condensed gutta-percha, one group with thermoplasticized gutta-percha with sealer and one group with thermoplasticized gutta-percha without sealer. The fillings were assessed radiographically and a dye penetration test was used to investigate the leakage. The lowest leakage values were found in those canals filled with laterally condensed gutta-percha. The sealing ability of thermoplasticized gutta-percha was enhanced by the use of a sealer. There was greater variation between operators in those groups where thermoplasticized gutta-percha was used.     

三种热牙胶根管充填技术牙胶充填面积百分数的比较研究

目的:比较3种热牙胶根管充填术后牙胶密度即牙胶充填而积百分数(percentage of gutta-percha-filled area,PGFA),评价3种热牙胶充填技术的充填效果.方法:采用人完整单根管离体牙40颗随机分成4组,根管预备后分别采用冷牙胶侧向加压法、热牙胶垂直加压法、热塑牙胶注射加压法(Obtura Ⅱ)和超声振动侧向加压法进行根管充填.每个根管分别在距离解剖根尖3、6和9 mm处横断,通过图像分析软件记录根管横断面积和牙胶充填的面积,计箅出牙胶充填面积百分数.结果:热牙胶垂直加压组和Obtura Ⅱ组的PGFA显著高于冷牙胶侧压组和超声侧压组(P＜0.05),热牙胶垂直加压组和Obtura Ⅱ组的PGFA之间无显著性差异(P＞0.05),且与根管充填的深度也无明显相关性(P＞0.05).热牙胶垂直加压组和Obtura Ⅱ组的PGFA在9 him和3 mm处明显大于冷牙胶侧压和超声侧压组(P＜0.05);在6 mm处,3种热牙胶的PGFA无显著性差异(P＞0.05).超声侧压组的PGFA与根管深度明显相关(P＜0.05).结论:热牙胶垂直加压法和Obtura Ⅱ允填后牙胶密度高,在9 mm和3mm处效果优于超声振动侧向加压法.超声振动侧向加压法充填效果受到根管深度影响.     

The sealing ability of the Thermafil obturation technique

Forty straight canals of maxillary canines and 40 curved canals in 20 mesial roots of mandibular molars were instrumented and randomly assigned to two groups of 40 canals each. For the experimental group, the canals were obturated using the Thermafil obturation technique. Lateral condensation was used for the obturation of the control group. Kerr pulp canal sealer was used in both group. The specimens were stored in 100% humidity for 1 wk. All teeth were suspended in black India ink for 14 days and decalcified in 5% nitric acid over a 2-day period. The teeth were then dehydrated in a graded series of alcohol to 100%. Methyl salycilate was used to clear and store the teeth for 48 h. Linear dye leakage measurements showed that canines obturated with the lateral condensation technique leaked significantly less than those obturated using the Thermafil technique (p = 0.02). The difference was not statistically significant in the molar roots.     

A comparison of thermoplasticized injectable gutta-percha obturation techniques

This study compared the quality of obturation of high- and low-temperature thermoplasticized injectable gutta-percha techniques and standard lateral condensation. A new model system was developed to more closely simulate the clinical environment. All obturations were performed in this same model which allowed direct comparisons between the different techniques. The resultant mass of gutta-percha was visually examined and graded for each obturation. Statistical analysis of the results indicated that both thermoplasticized injectable techniques were significantly better than lateral condensation. There was no significant difference between either of the thermoplastic obturation techniques.     

Apical sealing ability of Resilon/Epiphany versus gutta-percha/AH Plus: immediate and 16-months leakage

AIM: To compare the long-term apical sealing ability of gutta-percha/AH Plus and Resilon/Epiphany. METHODOLOGY: The root canals of 90 single-rooted human mandibular premolars with single narrow root canals were prepared with ProFile 0.4 taper instruments to apical size 40. After each instrument, the canals were irrigated with 1% sodium hypochlorite. Subsequently, the teeth were randomly divided into four groups containing 20 teeth each. Additionally, 10 prepared premolars served as positive and 10 counterparts with intact crowns as negative controls. The root canals were filled with gutta-percha/AH Plus or Resilon/Epiphany using lateral or vertical compaction. Specimens were allowed to set for 7 days at 37 degrees C and 100% humidity. Subsequently, the root fillings were removed down to the apical 4 mm. Fluid movement was then assessed using a fluid transportation model and re-evaluated after 16 months of water storage. Leakage within and between groups was compared using nonparametric tests. RESULTS: Negative controls revealed no fluid movement and positive controls displayed gross fluid movement at both times of observation. At the immediate measurement, there were no significant differences between the experimental groups (Kruskal-Wallis, P > 0.05). Gutta-percha/AH Plus fillings retained their seal after 16-months storage (Wilcoxon, P > 0.05), whilst the Resilon/Epiphany groups lost their sealing capacity (Wilcoxon, P < 0.001). In these groups, 29 of the 40 specimens exhibited gross leakage similar to positive controls. CONCLUSION: Initially, Resilon/Epiphany root fillings prevented fluid movement to the same degree as gutta-percha/AH Plus counterparts, but showed more fluid movement when tested at 16 months.     

Apical sealing efficacy of endodontic obturation techniques

Summary. This study in vitro utilized methylene blue dye to evaluate root canal apical leakage after maxillary central incisors were serially instrumented and obturated with laterally condensed guta-percha and sealer, a single fitted gutta-percha master cone and sealer, sealer alone or paste alone. The linear extent of dye penetration was measured, and the volume of dye leakage was evaluated using a dye-recovery spectrophotometric technique. Under the conditions of this study, the teeth obturated with laterally condensed gutta-percha and sealer exhibited the least leakage. The single gutta-percha cone and sealer technique had no advantage over use of sealer or paste when used alone.     

Area-metric analysis of dye leakage for evaluation of sealing ability of root canal obturation techniques

Abstract Root canal sealing ability of obturation techniques has been assessed in vitro with various methods. The majority of the methods employ microleakage tracers and particularly dyes. In vitro measurements of dye penetration are either linear or volumetric. Area-metric analysis is a three dimensional registration method of dye leakage. The purpose of the present study was to evaluate in cleared teeth area-metric analysis as opposed to linear analysis of dye penetration. Forty freshly extracted single rooted human teeth were used. Instrumentation was carried out using Hedstroem files with a step back technique. The root canals were obturated using Roth sealer and gutta-percha cones and lateral condensation technique. The roots were then subjected to dye leakage tests under vacuum of 50mmHg for 20min. India ink was used as the tracer. The roots were randomly divided in two groups. In Group A the roots were cleared and linear measurements of the dye penetration were recorded The roots in Group B were ground stepwise transversally and subjected to area metric analysis. The results showed that area-metric analysis enabled sufficient recordings of the dye leakage patterns and the volume of the dye penetration could also be calculated.