Analytical method to measure three-dimensional strain patterns in the left ventricle from single slice displacement data

Background

Displacement encoded Cardiovascular MR (CMR) can provide high spatial resolution measurements of three-dimensional (3D) Lagrangian displacement. Spatial gradients of the Lagrangian displacement field are used to measure regional myocardial strain. In general, adjacent parallel slices are needed in order to calculate the spatial gradient in the through-slice direction. This necessitates the acquisition of additional data and prolongs the scan time. The goal of this study is to define an analytic solution that supports the reconstruction of the out-of-plane components of the Lagrangian strain tensor in addition to the in-plane components from a single-slice displacement CMR dataset with high spatio-temporal resolution. The technique assumes incompressibility of the myocardium as a physical constraint.

Results

The feasibility of the method is demonstrated in a healthy human subject and the results are compared to those of other studies. The proposed method was validated with simulated data and strain estimates from experimentally measured DENSE data, which were compared to the strain calculation from a conventional two-slice acquisition.

Conclusion

This analytical method reduces the need to acquire data from adjacent slices when calculating regional Lagrangian strains and can effectively reduce the long scan time by a factor of two.     

Mapping right ventricular myocardial mechanics using 3D cine DENSE cardiovascular magnetic resonance

Background

The mechanics of the right ventricle (RV) are not well understood as studies of the RV have been limited. This is, in part, due to the RV''s thin wall, asymmetric geometry and irregular motion. However, the RV plays an important role in cardiovascular function. This study aims to describe the complex mechanics of the healthy RV using three dimensional (3D) cine displacement encoding with stimulated echoes (DENSE) cardiovascular magnetic resonance (CMR).

Methods

Whole heart 3D cine DENSE data were acquired from five healthy volunteers. Tailored post-processing algorithms for RV mid-wall tissue tracking and strain estimation are presented. A method for sub-dividing the RV into four regions according to anatomical land marks is proposed, and the temporal evolution of strain was assessed in these regions.

Results

The 3D cine DENSE tissue tracking methods successfully capture the motion and deformation of the RV at a high spatial resolution in all volunteers. The regional Lagrangian peak surface strain and time to peak values correspond with previous studies using myocardial tagging, DENSE and strain encoded CMR. The inflow region consistently displays lower peak strains than the apical and outflow regions, and the time to peak strains suggest RV mechanical activation in the following order: inflow, outflow, mid, then apex.

Conclusions

Model-free techniques have been developed to study the myocardial mechanics of the RV at a high spatial resolution using 3D cine DENSE CMR. The consistency of the regional RV strain patterns across healthy subjects is encouraging and the techniques may have clinical utility in assessing disrupted RV mechanics in the diseased heart.     

Comprehensive Cardiovascular magnetic resonance of myocardial mechanics in mice using three-dimensional cine DENSE

Background

Quantitative noninvasive imaging of myocardial mechanics in mice enables studies of the roles of individual genes in cardiac function. We sought to develop comprehensive three-dimensional methods for imaging myocardial mechanics in mice.

Methods

A 3D cine DENSE pulse sequence was implemented on a 7T small-bore scanner. The sequence used three-point phase cycling for artifact suppression and a stack-of-spirals k-space trajectory for efficient data acquisition. A semi-automatic 2D method was adapted for 3D image segmentation, and automated 3D methods to calculate strain, twist, and torsion were employed. A scan protocol that covered the majority of the left ventricle in a scan time of less than 25 minutes was developed, and seven healthy C57Bl/6 mice were studied.

Results

Using these methods, multiphase normal and shear strains were measured, as were myocardial twist and torsion. Peak end-systolic values for the normal strains at the mid-ventricular level were 0.29 ± 0.17, -0.13 ± 0.03, and -0.18 ± 0.14 for E_rr, E_cc, and E_ll, respectively. Peak end-systolic values for the shear strains were 0.00 ± 0.08, 0.04 ± 0.12, and 0.03 ± 0.07 for E_rc, E_rl, and E_cl, respectively. The peak end-systolic normalized torsion was 5.6 ± 0.9°.

Conclusions

Using a 3D cine DENSE sequence tailored for cardiac imaging in mice at 7 T, a comprehensive assessment of 3D myocardial mechanics can be achieved with a scan time of less than 25 minutes and an image analysis time of approximately 1 hour.     

Semi-automated left ventricular segmentation based on a guide point model approach for 3D cine DENSE cardiovascular magnetic resonance

Background

The most time consuming and limiting step in three dimensional (3D) cine displacement encoding with stimulated echoes (DENSE) MR image analysis is the demarcation of the left ventricle (LV) from its surrounding anatomical structures. The aim of this study is to implement a semi-automated segmentation algorithm for 3D cine DENSE CMR using a guide point model approach.

Methods

A 3D mathematical model is fitted to guide points which were interactively placed along the LV borders at a single time frame. An algorithm is presented to robustly propagate LV epicardial and endocardial surfaces of the model using the displacement information encoded in the phase images of DENSE data. The accuracy, precision and efficiency of the algorithm are tested.

Results

The model-defined contours show good accuracy when compared to the corresponding manually defined contours as similarity coefficients Dice and Jaccard consist of values above 0.7, while false positive and false negative measures show low percentage values. This is based on a measure of segmentation error on intra- and inter-observer spatial overlap variability. The segmentation algorithm offers a 10-fold reduction in the time required to identify LV epicardial and endocardial borders for a single 3D DENSE data set.

Conclusion

A semi-automated segmentation method has been developed for 3D cine DENSE CMR. The algorithm allows for contouring of the first cardiac frame where blood-myocardium contrast is almost nonexistent and reduces the time required to segment a 3D DENSE data set significantly.     

Motion-guided segmentation for cine DENSE MRI

Defining myocardial contours is often the most time-consuming portion of dynamic cardiac MRI image analysis. Displacement encoding with stimulated echoes (DENSE) is a quantitative MRI technique that encodes tissue displacement into the phase of the complex MRI images. Cine DENSE provides a time series of these images, thus facilitating the non-invasive study of myocardial kinematics. Epicardial and endocardial contours need to be defined at each frame on cine DENSE images for the quantification of regional displacement and strain as a function of time. This work presents a reliable and effective two-dimensional semi-automated segmentation technique that uses the encoded motion to project a manually-defined region of interest through time. Contours can then easily be extracted for each cardiac phase. This method boasts several advantages, including, (1) parameters are based on practical physiological limits, (2) contours are calculated for the first few cardiac phases, where it is difficult to visually distinguish blood from myocardium, and (3) the method is independent of the shape of the tissue delineated and can be applied to short- or long-axis views, and on arbitrary regions of interest. Motion-guided contours were compared to manual contours for six conventional and six slice-followed mid-ventricular short-axis cine DENSE datasets. Using an area measure of segmentation error, the accuracy of the segmentation algorithm was shown to be similar to inter-observer variability. In addition, a radial segmentation error metric was introduced for short-axis data. The average radial epicardial segmentation error was 0.36+/-0.08 and 0.40+/-0.10 pixels for slice-followed and conventional cine DENSE, respectively, and the average radial endocardial segmentation error was 0.46+/-0.12 and 0.46+/-0.16 pixels for slice following and conventional cine DENSE, respectively. Motion-guided segmentation employs the displacement-encoded phase shifts intrinsic to DENSE MRI to accurately propagate a single set of pre-defined contours throughout the remaining cardiac phases.     

Validation of in vivo 2D displacements from spiral cine DENSE at 3T

Background

Displacement Encoding with Stimulated Echoes (DENSE) encodes displacement into the phase of the magnetic resonance signal. Due to the stimulated echo, the signal is inherently low and fades through the cardiac cycle. To compensate, a spiral acquisition has been used at 1.5T. This spiral sequence has not been validated at 3T, where the increased signal would be valuable, but field inhomogeneities may result in measurement errors. We hypothesized that spiral cine DENSE is valid at 3T and tested this hypothesis by measuring displacement errors at both 1.5T and 3T in vivo.

Methods

Two-dimensional spiral cine DENSE and tagged imaging of the left ventricle were performed on ten healthy subjects at 3T and six healthy subjects at 1.5T. Intersection points were identified on tagged images near end-systole. Displacements from the DENSE images were used to project those points back to their origins. The deviation from a perfect grid was used as a measure of accuracy and quantified as root-mean-squared error. This measure was compared between 3T and 1.5T with the Wilcoxon rank sum test. Inter-observer variability of strains and torsion quantified by DENSE and agreement between DENSE and harmonic phase (HARP) were assessed by Bland-Altman analyses. The signal to noise ratio (SNR) at each cardiac phase was compared between 3T and 1.5T with the Wilcoxon rank sum test.

Results

The displacement accuracy of spiral cine DENSE was not different between 3T and 1.5T (1.2 ± 0.3 mm and 1.2 ± 0.4 mm, respectively). Both values were lower than the DENSE pixel spacing of 2.8 mm. There were no substantial differences in inter-observer variability of DENSE or agreement of DENSE and HARP between 3T and 1.5T. Relative to 1.5T, the SNR at 3T was greater by a factor of 1.4 ± 0.3.

Conclusions

The spiral cine DENSE acquisition that has been used at 1.5T to measure cardiac displacements can be applied at 3T with equivalent accuracy. The inter-observer variability and agreement of DENSE-derived peak strains and torsion with HARP is also comparable at both field strengths. Future studies with spiral cine DENSE may take advantage of the additional SNR at 3T.     

Simplified post processing of cine DENSE cardiovascular magnetic resonance for quantification of cardiac mechanics

Background

Cardiovascular magnetic resonance using displacement encoding with stimulated echoes (DENSE) is capable of assessing advanced measures of cardiac mechanics such as strain and torsion. A potential hurdle to widespread clinical adoption of DENSE is the time required to manually segment the myocardium during post-processing of the images. To overcome this hurdle, we proposed a radical approach in which only three contours per image slice are required for post-processing (instead of the typical 30–40 contours per image slice). We hypothesized that peak left ventricular circumferential, longitudinal and radial strains and torsion could be accurately quantified using this simplified analysis.

Methods and Results

We tested our hypothesis on a large multi-institutional dataset consisting of 541 DENSE image slices from 135 mice and 234 DENSE image slices from 62 humans. We compared measures of cardiac mechanics derived from the simplified post-processing to those derived from original post-processing utilizing the full set of 30–40 manually-defined contours per image slice. Accuracy was assessed with Bland-Altman limits of agreement and summarized with a modified coefficient of variation. The simplified technique showed high accuracy with all coefficients of variation less than 10% in humans and 6% in mice. The accuracy of the simplified technique was also superior to two previously published semi-automated analysis techniques for DENSE post-processing.

Conclusions

Accurate measures of cardiac mechanics can be derived from DENSE cardiac magnetic resonance in both humans and mice using a simplified technique to reduce post-processing time by approximately 94%. These findings demonstrate that quantifying cardiac mechanics from DENSE data is simple enough to be integrated into the clinical workflow.     

Direct three-dimensional myocardial strain tensor quantification and tracking using zHARP

Images of myocardial strain can be used to diagnose heart disease, plan and monitor treatment, and to learn about cardiac structure and function. Three-dimensional (3D) strain is typically quantified using many magnetic resonance (MR) images obtained in two or three orthogonal planes. Problems with this approach include long scan times, image misregistration, and through-plane motion. This article presents a novel method for calculating cardiac 3D strain using a stack of two or more images acquired in only one orientation. The zHARP pulse sequence encodes in-plane motion using MR tagging and out-of-plane motion using phase encoding, and has been previously shown to be capable of computing 3D displacement within a single image plane. Here, data from two adjacent image planes are combined to yield a 3D strain tensor at each pixel; stacks of zHARP images can be used to derive stacked arrays of 3D strain tensors without imaging multiple orientations and without numerical interpolation. The performance and accuracy of the method is demonstrated in vitro on a phantom and in vivo in four healthy adult human subjects.     

Reproducibility of cine displacement encoding with stimulated echoes (DENSE) cardiovascular magnetic resonance for measuring left ventricular strains,torsion, and synchrony in mice

Background

Advanced measures of cardiac function are increasingly important to clinical assessment due to their superior diagnostic and predictive capabilities. Cine DENSE cardiovascular magnetic resonance (CMR) is ideal for quantifying advanced measures of cardiac function based on its high spatial resolution and streamlined post-processing. While many studies have utilized cine DENSE in both humans and small-animal models, the inter-test and inter-observer reproducibility for quantification of advanced cardiac function in mice has not been evaluated. This represents a critical knowledge gap for both understanding the capabilities of this technique and for the design of future experiments. We hypothesized that cine DENSE CMR would show excellent inter-test and inter-observer reproducibility for advanced measures of left ventricular (LV) function in mice.

Methods

Five normal mice (C57BL/6) and four mice with depressed cardiac function (diet-induced obesity) were imaged twice, two days apart, on a 7T ClinScan MR system. Images were acquired with 15–20 frames per cardiac cycle in three short-axis (basal, mid, apical) and two long-axis orientations (4-chamber and 2-chamber). LV strain, twist, torsion, and measures of synchrony were quantified. Images from both days were analyzed by one observer to quantify inter-test reproducibility, while inter-observer reproducibility was assessed by a second observer’s analysis of day-1 images. The coefficient of variation (CoV) was used to quantify reproducibility.

Results

LV strains and torsion were highly reproducible on both inter-observer and inter-test bases with CoVs ≤ 15%, and inter-observer reproducibility was generally better than inter-test reproducibility. However, end-systolic twist angles showed much higher variance, likely due to the sensitivity of slice location within the sharp longitudinal gradient in twist angle. Measures of synchrony including the circumferential (CURE) and radial (RURE) uniformity of strain indices, showed excellent reproducibility with CoVs of 1% and 3%, respectively. Finally, peak measures (e.g., strains) were generally more reproducible than the corresponding rates of change (e.g., strain rate).

Conclusions

Cine DENSE CMR is a highly reproducible technique for quantification of advanced measures of left ventricular cardiac function in mice including strains, torsion and measures of synchrony. However, myocardial twist angles are not reproducible and future studies should instead report torsion.     

Oblique 3D MRI tags for the estimation of true 3D cardiac motion parameters

Aim of this study is to demonstrate the advantages of oblique 3D tags in cardiac magnetic resonance imaging (MRI) and the potential to accurately describe the complex motion of the myocardial wall. 3D cardiac Cine data were densely tagged with 3D oblique tags. The latter were tracked using Gabor analysis and active geometries. From the tag intersections, common 2D parameters such as long axis shortening, radial shortening and rotation were evaluated on a global as well as detailed local level. Finally, the same data were used to estimate left ventricular volume change and myocardial stress/strain. We have successfully tracked dense 3D tags and evaluated common parameters on a detailed local level. In addition, inherently 3D parameters could be estimated. Global motion data are in accordance with previously published data. Oblique tags allow for unambiguous localization of the tag plane in all MRI slices and in any time frame. In contrast to HARP, our tag tracking methodology allows for tracking of the tags even when they are dense. Motion parameters can be extracted in greater detail. Moreover, the intersections of dense oblique 3D tags provide a natural basis for a finite element model of the heart. Straight forward access to the 3D characteristics of the cardiac motion is provided.     

Co-attention spatial transformer network for unsupervised motion tracking and cardiac strain analysis in 3D echocardiography

Myocardial ischemia/infarction causes wall-motion abnormalities in the left ventricle. Therefore, reliable motion estimation and strain analysis using 3D+time echocardiography for localization and characterization of myocardial injury is valuable for early detection and targeted interventions. Previous unsupervised cardiac motion tracking methods rely on heavily-weighted regularization functions to smooth out the noisy displacement fields in echocardiography. In this work, we present a Co-Attention Spatial Transformer Network (STN) for improved motion tracking and strain analysis in 3D echocardiography. Co-Attention STN aims to extract inter-frame dependent features between frames to improve the motion tracking in otherwise noisy 3D echocardiography images. We also propose a novel temporal constraint to further regularize the motion field to produce smooth and realistic cardiac displacement paths over time without prior assumptions on cardiac motion. Our experimental results on both synthetic and in vivo 3D echocardiography datasets demonstrate that our Co-Attention STN provides superior performance compared to existing methods. Strain analysis from Co-Attention STNs also correspond well with the matched SPECT perfusion maps, demonstrating the clinical utility for using 3D echocardiography for infarct localization.     

Preliminary validation of angle-independent myocardial elastography using MR tagging in a clinical setting

Myocardial elastography (ME), a radio-frequency (RF) based speckle tracking technique, was employed in order to image the entire two-dimensional (2D) transmural deformation field in full echocardiographic views and was validated against tagged magnetic resonance imaging (tMRI) in normal as well as reperfused (i.e., treated myocardial infarction [MI]) human left ventricles. RF ultrasound and tMRI frames were acquired at the papillary muscle level in 2D short-axis (SA) views at the frame rates of 136 (fps; real-time) and 33 fps (electrocardiogram [ECG]-gated), respectively. In ME, in-plane, 2D (lateral and axial) incremental displacements were iteratively estimated using one-dimensional (1D) cross-correlation and recorrelation techniques in a 2D search with a 1D matching kernel. In tMRI, cardiac motion was estimated by a template-matching algorithm on a 2D grid-shaped mesh. In both ME and tMRI, cumulative 2D displacements were obtained and then used to estimate 2D Lagrangian finite systolic strains, from which polar (i.e., radial and circumferential) strains, namely angle-independent measures, were further obtained through coordinate transformation. Principal strains, which are angle-independent and less centroid-dependent than polar strains, were also computed and imaged based on the 2D finite strains using methodology previously established. Both qualitatively and quantitatively, angle-independent ME is shown to be capable of (1) estimating myocardial deformation in good agreement with tMRI estimates in a clinical setting and of (2) differentiating abnormal from normal myocardium in a full left-ventricular view. The principal strains were concluded to be a potential diagnostic measure for detection of cardiac disease with reduced centroid dependence.     

Quantitative assessment of myocardial strain with displacement encoding with stimulated echoes MRI in patients with coronary artery disease

To determine the diagnostic performance and reproducibility of strain assessment with displacement encoding with stimulated echoes (DENSE) cardiovascular magnetic resonance (CMR) in identifying contractile abnormalities in myocardial segments with late gadolinium enhancement (LGE). DENSE CMR was obtained on short-axis planes of the left ventricle (LV) in 24 patients with suspected coronary artery disease. e1 and e2 strains of LV wall were quantified. Cine MRI was acquired to determine percent systolic wall thickening (%SWT), followed by (LGE) CMR. The diagnostic performance of e1, e2 and %SWT for predicting the presence of LGE was evaluated by receiver operating characteristics (ROC) analysis. Myocardial scar on LGE CMR was observed in 91 (24 %) of 384 segments. The area under ROC curve for predicting the segments with LGE was 0.874 by e1, 0.916 by e2 and 0.828 by %SWT (p = 0.001 between e2 and %SWT). Excellent inter-observer reproducibility was found for strain [Intraclass correlation coefficient (ICC) = 0.962 for e1, 0.955 for e2] as compared with %SWT (ICC = 0.790). DENSE CMR can be performed as a part of routine CMR study and allows for quantification of myocardial strain with high inter-observer reproducibility. Myocardial strain, especially e2 is useful in detecting altered abnormal systolic contraction in the segments with myocardial scar.     

Early manifestation of alteration in cardiac function in dystrophin deficient mdx mouse using 3D CMR tagging

Background

Duchenne muscular dystrophy (DMD) is caused by the absence of the cytoskeletal protein, dystrophin. In DMD patients, dilated cardiomyopathy leading to heart failure may occur during adolescence. However, early cardiac dysfunction is frequently undetected due to physical inactivity and generalized debilitation. The objective of this study is to determine the time course of cardiac functional alterations in mdx mouse, a mouse model of DMD, by evaluating regional ventricular function with CMR tagging.

Methods

In vivo myocardial function was evaluated by 3D CMR tagging in mdx mice at early (2 months), middle (7 months) and late (10 months) stages of disease development. Global cardiac function, regional myocardial wall strains, and ventricular torsion were quantified. Myocardial lesions were assessed with Masson''s trichrome staining.

Results

Global contractile indexes were similar between mdx and C57BL/6 mice in each age group. Histology analysis showed that young mdx mice were free of myocardial lesions. Interstitial fibrosis was present in 7 month mdx mice, with further development into patches or transmural lesions at 10 months of age. As a result, 10 month mdx mice showed significantly reduced regional strain and torsion. However, young mdx mice showed an unexpected increase in regional strain and torsion, while 7 month mdx mice displayed similar regional ventricular function as the controls.

Conclusion

Despite normal global ventricular function, CMR tagging detected a biphasic change in myocardial wall strain and torsion, with an initial increase at young age followed by progressive decrease at older ages. These results suggest that CMR tagging can provide more sensitive measures of functional alterations than global functional indexes in dystrophin-related cardiomyopathies.     

Statistically-driven 3D fiber reconstruction and denoising from multi-slice cardiac DTI using a Markov random field model

The construction of subject-specific dense and realistic 3D meshes of the myocardial fibers is an important pre-requisite for the simulation of cardiac electrophysiology and mechanics. Current diffusion tensor imaging (DTI) techniques, however, provide only a sparse sampling of the 3D cardiac anatomy based on a limited number of 2D image slices. Moreover, heart motion affects the diffusion measurements, thus resulting in a significant amount of noisy fibers. This paper presents a Markov random field (MRF) approach for dense reconstruction of 3D cardiac fiber orientations from sparse DTI 2D slices. In the proposed MRF model, statistical constraints are used to relate the missing and the known fibers, while a consistency term is encoded to ensure that the obtained 3D meshes are locally continuous. The validation of the method using both synthetic and real DTI datasets demonstrates robust fiber reconstruction and denoising, as well as physiologically meaningful estimations of cardiac electrical activation.     

Hybrid image visualization tool for 3D integration of CT coronary anatomy and quantitative myocardial perfusion PET

Purpose

Multimodal cardiac imaging by CTA and quantitative PET enables acquisition of patient-specific coronary anatomy and absolute myocardial perfusion at rest and during stress. In the clinical setting, integration of this information is performed visually or using coronary arteries distribution models. We developed a new tool for CTA and quantitative PET integrated 3D visualization, exploiting XML and DICOM clinical standards.

Methods

The hybrid image tool (HIT) developed in the present study included four main modules: (1) volumetric registration for spatial matching of CTA and PET data sets, (2) an interface to PET quantitative analysis software, (3) a derived DICOM generator able to build DICOM data set from quantitative polar maps, and (4) a 3D visualization tool of integrated anatomical and quantitative flow information. The four modules incorporated in the HIT tool communicate by defined standard XML files: XML-transformation and XML MIST standards.

Results

The HIT tool implements a 3D representation of CTA showing real coronary anatomy fused to PET-derived quantitative myocardial blood flow distribution. The technique was validated on 16 data sets from EVINCI study population. The validation of the method confirmed the high matching between “original” and derived data sets as well as the accuracy of the registration procedure.

Conclusions

Three-dimensional integration of patient- specific coronary artery anatomy provided by CTA and quantitative myocardial blood flow obtained from PET imaging can improve cardiac disease assessment. The HIT tool introduced in this paper may represent a significant advancement in the clinical use of this multimodal approach.     

Fast automatic myocardial segmentation in 4D cine CMR datasets

A novel automatic 3D+time left ventricle (LV) segmentation framework is proposed for cardiac magnetic resonance (CMR) datasets. The proposed framework consists of three conceptual blocks to delineate both endo and epicardial contours throughout the cardiac cycle: (1) an automatic 2D mid-ventricular initialization and segmentation; (2) an automatic stack initialization followed by a 3D segmentation at the end-diastolic phase; and (3) a tracking procedure. Hereto, we propose to adapt the recent B-spline Explicit Active Surfaces (BEAS) framework to the properties of CMR images by integrating dedicated energy terms. Moreover, we extend the coupled BEAS formalism towards its application in 3D MR data by adapting it to a cylindrical space suited to deal with the topology of the image data. Furthermore, a fast stack initialization method is presented for efficient initialization and to enforce consistent cylindrical topology. Finally, we make use of an anatomically constrained optical flow method for temporal tracking of the LV surface.The proposed framework has been validated on 45 CMR datasets taken from the 2009 MICCAI LV segmentation challenge. Results show the robustness, efficiency and competitiveness of the proposed method both in terms of accuracy and computational load.     

超声三维斑点追踪评价不同心脏起搏方式对健康犬左心室功能的影响

目的 探讨超声三维斑点追踪成像技术评价不同心室位点心脏起搏对健康犬左室壁机械同步性和左室功能的影响.方法 分别采集10只健康开胸比格犬基础状态和右室心尖、左室心尖、左室侧壁起搏状态一个完整心动周期的左心室全容积实时图像;同步记录左室压力时间变化曲线并获取左室射血压力和收缩期压力最大上升速率.用超声三维斑点追踪分析软件分别提取不同状态左室壁径向三维应变图、左室壁径向三维峰值应变和左室收缩末期容积、舒张末期容积、射血分数、每搏输出量、心输出量.定性观察并比较不同状态左室壁各节段心肌的径向三维应变同步性.对定量参数进行配对t检验、卡方检验和直线相关分析.结果 ①左室心尖或侧壁起搏状态左室壁各节段心肌的径向三维应变不同步程度较右室心尖起搏状态明显.②左室心尖或侧壁起搏状态左室壁径向三维峰值应变显著减低的心肌节段数多于右室心尖起搏状态(9/16 对 2/16,P<0.05).③左室心尖或侧壁起搏状态左室壁整体径向三维峰值应变和左室每搏输出量、射血分数、心输出量均低于右室心尖起搏状态(P<0.05).④不同状态左室壁整体径向三维峰值应变分别与左室每搏输出量、射血分数、心输出量呈线性正相关(r=0.781～0.984,P<0.05).结论 左室心尖或侧壁起搏对健康犬左室壁机械同步性和左室功能的损害超过右心室心尖起搏.     

Estimation of 3D left ventricular deformation from echocardiography

The quantitative estimation of regional cardiac deformation from 3D image sequences has important clinical implications for the assessment of viability in the heart wall. Such estimates have so far been obtained almost exclusively from Magnetic Resonance (MR) images, specifically MR tagging. In this paper we describe a methodology for estimating cardiac deformations from 3D echocardiography (3DE). The images are segmented interactively and then initial correspondence is established using a shape-tracking approach. A dense motion field is then estimated using a transversely isotropic linear elastic model, which accounts for the fiber directions in the left ventricle. The dense motion field is in turn used to calculate the deformation of the heart wall in terms of strain in cardiac specific directions. The strains obtained using this approach in open-chest dogs before and after coronary occlusion, show good agreement with previously published results in the literature. They also exhibit a high correlation with strains produced in the same animals using implanted sonomicrometers. This proposed method provides quantitative regional 3D estimates of heart deformation from ultrasound images.     

Quantification of left ventricular functional parameter values using 3D spiral bSSFP and through-time Non-Cartesian GRAPPA

Background

The standard clinical acquisition for left ventricular functional parameter analysis with cardiovascular magnetic resonance (CMR) uses a multi-breathhold multi-slice segmented balanced SSFP sequence. Performing multiple long breathholds in quick succession for ventricular coverage in the short-axis orientation can lead to fatigue and is challenging in patients with severe cardiac or respiratory disorders. This study combines the encoding efficiency of a six-fold undersampled 3D stack of spirals balanced SSFP sequence with 3D through-time spiral GRAPPA parallel imaging reconstruction. This 3D spiral method requires only one breathhold to collect the dynamic data.

Methods

Ten healthy volunteers were recruited for imaging at 3 T. The 3D spiral technique was compared against 2D imaging in terms of systolic left ventricular functional parameter values (Bland-Altman plots), total scan time (Welch’s t-test) and qualitative image rating scores (Wilcoxon signed-rank test).

Results

Systolic left ventricular functional values were not significantly different (i.e. 3D-2D) between the methods. The 95% confidence interval for ejection fraction was −0.1 ± 1.6% (mean ± 1.96*SD). The total scan time for the 3D spiral technique was 48 s, which included one breathhold with an average duration of 14 s for the dynamic scan, plus 34 s to collect the calibration data under free-breathing conditions. The 2D method required an average of 5min40s for the same coverage of the left ventricle. The difference between 3D and 2D image rating scores was significantly different from zero (Wilcoxon signed-rank test, p < 0.05); however, the scores were at least 3 (i.e. average) or higher for 3D spiral imaging.

Conclusion

The 3D through-time spiral GRAPPA method demonstrated equivalent systolic left ventricular functional parameter values, required significantly less total scan time and yielded acceptable image quality with respect to the 2D segmented multi-breathhold standard in this study. Moreover, the 3D spiral technique used just one breathhold for dynamic imaging, which is anticipated to reduce patient fatigue as part of the complete cardiac examination in future studies that include patients.

Electronic supplementary material

The online version of this article (doi:10.1186/s12968-014-0065-1) contains supplementary material, which is available to authorized users.