Synthesis of [3‐13C]‐, [4‐13C]‐ and [11‐13C]‐porphobilinogen

[4‐¹³C]‐porphobilinogen 1a, [3‐¹³C]‐porphobilinogen 1b and [11‐¹³C]‐porphobilinogen 1c are prepared from [1‐¹³C]‐3‐(tetrahydropyran‐2′‐yloxy)‐propionaldehyde 2a, methyl [4‐¹³C]‐4‐nitrobutyrate 3b and [1‐¹³C]‐isocyanoacetonitrile 5c, respectively. The building blocks 2, 3 and 5 can be prepared efficiently in any isotopomeric form. Via base‐catalyzed condensation of these building blocks porphobilinogen can be enriched with ¹³C and ¹⁵N stable isotopes at any position and combination of positions. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of [14C]‐ and [13C6]‐labeled potent HIV non‐nucleoside reverse transcriptase inhibitor

5,11‐Dihydro‐11‐ethyl‐5‐methyl‐8‐{2‐{(1‐oxido‐4‐quinolinyl)oxy}ethyl}‐6H‐dipyrido[3,2‐b:2′,3′‐e][1,4]diazepin‐6‐one, (1), labeled with carbon‐14 in the quinoline–benzene ring, in one of the pyridine rings of the dipyridodiazepinone tricyclic moiety, and in the side chain, was prepared in three different syntheses with specific activities ranging from 44 to 47 mCi/mmol (1.63–1.75 GBq/mmol). In the first synthesis, 5,11‐dihydro‐11‐ethyl‐8‐(2‐hydroxyethyl)‐5‐methyl‐6H‐dipyrido[3,2‐b:2′,3′‐e][1,4]diazepin‐6‐one (2) was coupled to 4‐hydroxyquinoline, [benzene‐¹⁴C(U)]‐, using Mitsunobu's reaction conditions, followed by the oxidation of the quinoline nitrogen with 3‐chloroperoxybenzoic acid to give ([¹⁴C]‐(1a)) in 43% radiochemical yield. Second, 3‐amino‐2‐chloropyridine, [2,6‐¹⁴C]‐, was used to prepare 8‐bromo‐5,11‐dihydro‐11‐ethyl‐5‐methyl‐6H‐dipyrido[3,2‐b:2′,3′‐e][1,4]diazepin‐6‐one (8), and then Stille coupled to allyl(tributyl)tin followed by ozonolysis of the terminal double bond and in situ reduction of the resulting aldehyde to alcohol (10). Mitsunobu etherification and oxidation as seen before gave ([¹⁴C]‐(1b)) in eight steps and in 11% radiochemical yield. Finally, carbon‐14 potassium cyanide was used to prepare isopropyl cyanoacetate (12), which was used to transform bromide (8) to labeled aryl acetic acid (13) under palladium catalysis. Trihydroborane reduction of the acid gave alcohol (14) labeled in the side chain, which was used as described above to prepare ([¹⁴C]‐(1c)) in 4.3% radiochemical yield. The radiochemical purities of these compounds were determined by radio‐HPLC and radio‐TLC to be more than 98%. To prepare [¹³C₆]‐(1), [¹³C₆]‐4‐hydroxyquinoline was prepared from [¹³C₆]‐aniline and then coupled to (2) and oxidized as seen before. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of C‐14 and C‐13, H‐2‐labeled IKK inhibitor: [14C] and [13C4,D3]‐N‐(6‐chloro‐7‐methoxy‐9H‐pyrido[3,4‐b]indol‐8‐yl)‐2‐methyl‐3‐pyridinecarboxamide

[¹⁴C]‐N‐(6‐Chloro‐7‐methoxy‐9H‐pyrido [3,4‐b]indol‐8‐yl)‐2‐methyl‐3‐pyridinecarboxamide (5B ), an IKK inhibitor, was synthesized from [¹⁴C]‐barium carbonate in two steps in an overall radiochemical yield of 41%. The intermediate, [carboxyl‐¹⁴C]‐2‐methylnicotinic acid, was prepared by the lithiation and carbonation of 3‐bromo‐2‐methylpyridine. [¹³C₄,D₃]‐N‐(6‐chloro‐7‐methoxy‐9H‐pyrido [3,4‐b]indol‐8‐yl)‐2‐methyl‐3‐pyridinecarboxamide (5C ) was synthesized from [1,2,3,4‐¹³C₄]‐ethyl acetoacetate and [D₄]‐methanol in six steps in an overall yield of 2%. [¹³C₄]‐2‐methylnicotic acid, was prepared by condensation of [¹³C₄]‐ethyl 3‐aminocrotonate and acrolein, followed by hydrolysis with lithium hydroxide. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of isotope‐labeled HSP90 inhibitor: [13CD3] and [14C]‐TAK‐459

[¹³CD₃]‐TAK‐459 (1A), an HSP90 inhibitor, was synthesized from [¹³CD₃]‐sodium methoxide in three steps in an overall yield of 29%. The key intermediate [¹³CD₃]‐2‐methoxy‐6‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)pyridine was synthesized in two steps from 2,6‐dibromopyridine and stable isotope‐labeled sodium methoxide. [¹⁴C]‐TAK‐459 (1B) was synthesized from [¹⁴C(U)]‐guanidine hydrochloride in five steps in an overall radiochemical yield of 5.4%. The key intermediate, [¹⁴C]‐(R)‐2‐amino‐7‐(2‐bromo‐4‐fluorophenyl)‐4‐methyl‐7,8‐dihydropyrido[4,3‐d]pyrimidin‐5(6H)‐one, was prepared by microwave‐assisted condensation.     

Synthesis of carbon‐14‐labeled isotopomer of 6‐(4‐methanesulfonylphenyl)‐5‐[4‐(2‐piperidin‐1‐yl‐ethoxy)phenoxy]‐naphthalen‐2‐ol HCL salt (LY2066948‐[14C] HCL salt)

Carbon‐14‐labeled 6‐(4‐methanesulfonylphenyl)‐5‐[4‐(2‐piperidin‐1‐yl‐ethoxy)phenoxy]naphthalen‐2‐ol, a novel selective estrogen receptor modulator (SERM) was synthesized. The key component, 6‐methoxy‐1‐tetralone‐[carbonyl‐¹⁴C], was synthesized from 3‐(3‐methoxyphenyl)‐propionic acid via an intra‐molecular Friedel–Crafts acylation of 4‐(3‐methoxyphenyl)butanoic acid‐[carboxy‐¹⁴C]. A palladium catalyzed alpha‐keto arylation of 6‐methoxy‐1‐tetralone with 4‐methanesulfonyl‐phenyl bromide, followed by a sequence of bromination, DDQ dehydrogenation, aryl Ullmann reaction, and demethylation with BBr₃ gave the desired product LY2066948‐[¹⁴C]. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of 5‐[4,5‐13C2]‐ and 5‐[1,5‐13C2]aminolevulinic acid

5‐[4,5‐¹³C₂]‐ and 5‐[1,5‐¹³C₂]Aminolevulinic acid (ALA) have been synthesized by the Gabriel condensation of potassium phthalimide with ethyl bromo[1,2‐¹³C₂]acetate (derived from [1,2‐¹³C₂]acetic acid) or ethyl bromo[2‐¹³C]‐acetate (derived from sodium [2‐¹³C]acetate), followed by conversion to the chloride, coupling reaction with 2‐ethoxycarbonylethylzinc iodide derived from ethyl 3‐iodopropionate or 2‐methoxy[¹³C]carbonylethylzinc iodide derived from methyl 3‐iodo[1‐¹³C]propionate (generated from potassium [¹³C]cyanide), and hydrolysis. Copyright © 2002 John Wiley & Sons, Ltd.     

The synthesis of [3,4,1′‐13C3]genistein

A facile synthesis is described for [3,4,1′‐¹³C₃]genistein for use as an internal standard in isoflavone analysis by mass spectrometric methods. Ethyl 4‐hydroxy[1‐¹³C]benzoate was first prepared from the reaction of diethyl [2‐¹³C]malonate and 4H‐pyran‐4‐one. Two further ¹³C atoms were incorporated using potassium [¹³C]cyanide as the source to give 4′‐benzyloxy‐[1,2,1′‐¹³C₃]phenylacetonitrile. [3,4,1′‐¹³C₃]Genistein was then constructed through coupling of the isotopically labelled phenylacetonitrile with phloroglucinol under Hoesch conditions, followed by formylation and cyclization. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of [2‐13C, 4‐13C]‐(2R,3S)‐catechin and [2‐13C, 4‐13C]‐(2R,3R)‐epicatechin

The first synthesis of doubly labeled, [2‐¹³C, 4‐¹³C]‐(2R,3S)‐catechin 15 and [2‐¹³C, 4‐¹³C]‐(2R,3R)‐epicatechin 18 starting from labeled 2‐hydroxy‐4, 6‐bis(benzyloxy)acetophenone 3 and labeled 3, 4‐bis(benzyloxy)‐benzaldehyde 7 are described. Copyright © 2010 John Wiley & Sons, Ltd.     

A new approach for 11C–C bond formation: Synthesis of 17α‐(3′‐[11C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol

A new approach for ¹¹C–C bond formation via a Sonogashira‐like cross‐coupling reaction of terminal alkynes with [¹¹C]methyl iodide was exemplified by the synthesis of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol. The LC‐purified title compound was obtained in decay‐corrected radiochemical yields of 27–47% (n=8) based on [¹¹C]methyl iodide within 21–27 min after EOB. In a typical synthesis starting from 9.6 GBq [¹¹C]methyl iodide, 1.87 GBq of 17α‐(3′‐[¹¹C]prop‐1‐yn‐1‐yl)‐3‐methoxy‐3,17β‐estradiol was synthesized in radiochemical purity >99%. The specific radioactivity ranged between 10 and 19 GBq/µmol, and the labeling position was verified by ¹³C‐NMR analysis of the corresponding ¹³C‐labeled compound. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of 13C‐labeled 5‐aminoimidazole‐4‐carboxamide‐1‐β‐D‐[13C5] ribofuranosyl 5′‐monophosphate

5‐Aminoimidazole‐4‐carboxamide‐1‐β‐D‐[¹³C₅] ribofuranosyl 5′‐monophosphate ([¹³C₅ ribose] AICAR‐PO₃H₂) ( 6 ) has been synthesized from [¹³C₅]adenosine. Incorporation of the mass‐label into [¹³C₅ ribose] AICAR‐PO₃H₂ provides a useful standard to aid in metabolite identification and quantification in monitoring metabolic pathways. A synthetic route to the ¹³C‐labeled compound has not been previously reported. Our method employs a hybrid enzymatic, and chemical synthesis approach that applies an enzymatic conversion from adenosine to inosine followed by a ring‐cleavage of the protected inosine. A direct phosphorylation of the resulting 2′,3′‐isopropylidine acadesine ( 5 ) was developed to yield the title compound in 99% purity following ion exchange chromatography.     

Synthesis and purification of [2‐13C]‐5‐fluorouracil

[2‐¹³C]‐5‐Fluoropyrimidine‐2,4(1H,3H)‐dione ([2‐¹³C]‐5‐fluorouracil or [2‐¹³C]‐5‐FU) is a potential diagnostic agent for measuring 5‐FU‐induced toxicity in cancer patients. It was prepared and purified with isotopic and chemical purity of>99% on a multigram scale in a two‐step synthesis from [¹³C]‐urea. Preparative separation of [2‐¹³C]‐FU and [2‐¹³C]‐uracil was carried out by automated medium pressure silica gel column chromatography. The method is applicable to a broader range of 5‐FU isotopic analogs derived from labeled uracil. Copyright © 2011 John Wiley & Sons, Ltd.     

Isotopically labelled tropane alkaloids. The synthesis of (RS)‐[3′, 3′‐2H2]‐ and (RS)‐[1′‐13C, 3′, 3′‐2H2]‐ hyoscyamines for metabolism studies in plants

A synthetic route to isotopically labelled forms of the tropane alkaloid hyoscyamine, including (RS)‐[3′, 3′,‐²H₂]‐ ( 2a ) and (RS)‐[1′‐¹³C, 3′, 3′,‐²H₂]‐ ( 2b ) hyoscyamines, involving the reaction between phenylacetyl tropine and formaldehyde is described. The isotopically labelled products enable the metabolism of hyoscyamine to be studied in plants such as Datura stramonium. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of (E)‐2,3′,4,5′‐tetramethoxy[2‐11C]stilbene

In this paper, we describe the radiosynthesis of the compound (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene, a potential, universal tumour positron emission tomography imaging agent. The production of (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was carried out via ¹¹C‐methylation of (E)‐2‐(hydroxy)‐3′,4,5′‐trimethoxystilbene by using [¹¹C]methyl trifluoromethanesulfonate ([¹¹C]methyl triflate). (E)‐2,3′,4,5′‐tetramethoxy[2‐¹¹C]stilbene was obtained with a radiochemical purity greater than 95% in a 20 ± 2% decay‐corrected radiochemical yield, based upon [¹¹C]carbon dioxide. Synthesis, purification and formulation were completed on an average of 30 min following the end of bombardment (EOB). The specific radioactivity obtained was 1.9 ± 0.6 GBq/µmol at EOB. Copyright © 2007 John Wiley & Sons, Ltd.     

Syntheses of [14C]‐labeled 2‐(3‐chlorophenyloxy)‐3‐[3‐(3‐hydroxy) pyridin‐4‐yl propoxy]pyridine,a phosphodiesterase 4 inhibitor and its metabolites

We describe here the synthesis of [¹⁴C]‐2‐(3‐chlorophenyloxy)‐3‐[3‐(3‐hydroxy)pyridin‐4‐yl propoxy]pyridine (1), a phosphodiesterase 4 inhibitor. [¹⁴C]‐Labeled 1 was prepared in three steps from [¹⁴C]‐2‐bromopyridin‐3‐ol in an overall yield of 32%. Preparation of [¹⁴C]‐labeled 2 and 3, two metabolites of 1, is also described. Copyright © 2014 John Wiley & Sons, Ltd.     

Carbon‐14‐and carbon‐13‐labeled phosphoric acid [2‐4‐(4‐cyanophenyl)‐thiazol‐2‐yl]‐(2,4‐difluorophenyl)‐1‐[1,2,4]triazol‐4‐yl‐methylpropoxymethyl] monoester dilysine salt,a prodrug of ravuconazole

4‐Bromobenzoic acid [carboxyl‐¹⁴C] and 4‐(2‐bromoacetyl) [Ar‐¹³C₆]benzonitrile were transformed into the title compounds containing [ring¹⁴C‐thiazol‐4‐yl] and [Ar‐¹³C₆‐benzonitrile]. ¹⁴C‐Ravuconazole was prepared in 37% yield and Purity >99%. ¹³C₆‐Ravuconazole was made in 56% overall yield and Purity of >98%. Each labeled compound was converted by additional reaction steps to the corresponding labeled prodrug. Copyright © 2011 John Wiley & Sons, Ltd     

An efficient synthesis of carbon‐14‐labeled 6‐[2‐(dimethylamino)ethyl]‐14‐(1‐ethylpropyl)‐5,6,7,8‐tetrahydroindolo [2,1‐α] [2,5]benzodiazocine‐11‐carboxylic acid using Curtius rearrangement reaction as a key step

Here we report an efficient synthesis of ¹⁴C‐labeled 6‐[2‐(dimethylamino)ethyl]‐14‐(1‐ethylpropyl)‐5,6,7,8‐tetrahydroindolo‐[2,1‐α][2,5]benzodiazocine‐11‐carboxylic acid (1) using the Curtius rearrangement as a key step. The synthesis was initiated by converting the unlabeled aryl carboxylic acid to an aryl amine via Curtius rearrangement reaction. The resulting aryl amine was then converted to an aryl iodide which was coupled with zinc [¹⁴C]cyanide to form an aryl [¹⁴C]nitrile. Subsequent hydrolysis yielded the ¹⁴C‐labeled carboxylic acid [¹⁴C]‐1. This overall process represents a mild and potentially general approach for conversion of unlabeled carboxylic acids to isotopically labeled carboxylic acids. Copyright © 2010 John Wiley & Sons, Ltd.     

Rapid and efficient synthesis of stable isotope labeled [13C4, D4]‐5‐(hydroxymethyl)thiazole: versatile building block for biologically interesting compounds

5‐(Hydroxymethyl)thiazole is a versatile building block for many biologically active compounds. A rapid and efficient four‐step synthesis of its stable isotope labeled counterpart with four ¹³C and four deuterium atoms in 32% total yield is reported. Condensation of [¹³C₂]‐chloro acetic acid with [¹³C]‐thiourea gave [¹³C₃]‐2,4‐thiazolidinedione. Reaction of [¹³C₃]‐2,4‐thiazolidinedione with phosphorus oxybromide and [¹³C, D]‐DMF (Me₂N¹³CDO) produced [¹³C₄, D]‐2,4‐dibromo‐thiazole‐5‐carboxaldehyde. The resultant aldehyde was then reduced by sodium borodeuteride to [¹³C₄, D₂]‐(2,4‐dibromo‐thiazol‐5‐yl)‐methanol. Catalytic deuteration of [¹³C₄, D₂]‐(2,4‐dibromo‐thiazol‐5‐yl)‐methanol by palladium black with deuterium gas at 1 atm pressure and room temperature produced completely de‐brominated [¹³C₄, D₄]‐5‐(hydroxymethyl)thiazole. De‐bromination of the 2,4‐dibromothiazole by the catalysis of palladium black provides a simple and convenient synthetic method for the stable isotope labeled and potentially radioactive isotope labeled thiazole compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

A gram‐scale synthesis of [3,4‐13C2,1α,7‐2H2]cortisone

A gram‐scale synthesis of [3,4‐¹³C₂,1α,7‐²H₂]cortisone from prednisone was developed. The deuterium atom at the C‐1 position was introduced through a regioselective and stereoselective deuteration of the 1,2‐double bond of the 1,4‐diene‐3‐one using Wilkinson's catalyst. After the oxidative cleavage of the A‐ring, two carbon‐13 atoms were introduced via acetylation of an A‐ring enol lactone with [1,2‐¹³C₂]acetyl chloride. The steroidal A‐ring was then reconstructed to incorporate the carbon‐13 atoms into the C‐3 and C‐4 positions. The deuterium atom at C‐7 was introduced through a regioselective deuteration of the 6,7‐double bond of a 4,6‐diene‐3‐one intermediate using palladium on strontium carbonate. The M + 4 stable isotope labeled cortisone was thus prepared in ca. 4% overall yield. In addition, [3,4‐¹³C₂,1α,7‐²H₂]‐11‐dehydrocorticosterone, [3,4‐¹³C₂,1α,7‐²H₂]cortisol, and [3,4‐¹³C₂,1α,7‐²H₂]corticosterone were also prepared. Copyright © 2011 John Wiley & Sons, Ltd.     

A convenient synthesis of 2′,3′‐dideoxyinosine‐13C5 and related 2′,3′‐dideoxyadenosine‐13C5

2′,3′‐Dideoxyinosine‐¹³C₅ (ddI‐¹³C₅) and the related 2′,3′‐dideoxyadenosine‐¹³C₅ (ddA‐¹³C₅) were prepared from (S)‐5‐[¹³C₅]2,3‐dideoxyribonolactone 1 . From a batch of this starting material ddI‐¹³C₅ was made in 27% overall yield in seven steps and ddA‐¹³C₅ in five steps and 14% overall yield. The known synthesis of ddI‐¹³C₅ from glucose‐¹³C₆ took 18‐steps_; therefore the present work is a substantial improvement. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of 4‐thia[5‐13C]lysine

This report describes the synthesis of 4‐thia[5‐¹³C]lysine, an isotopomer of 4‐thialysine that is an analog of lysine. It was synthesized from 2‐amino[1‐¹³C]ethanol hydrochloride (1) in two steps. In the first step, 1 was converted to 2‐bromo[2‐¹³C]ethylamine hydrobromide (2). The reaction of cysteine with 2 in basic condition followed by acidification afforded 4‐thia[5‐¹³C]lysine hydrochloride (3).