Four-year clinical performance and marginal analysis of pressed glass ceramic inlays luted with ormocer restorative vs. conventional luting composite

Objectives

The aim of the present study was to evaluate the ormocer Definite (Degudent, Hanau, Germany) as resin luting cement.

Methods

In a controlled prospective clinical study, 57 Cergogold (Degudent) all-ceramic inlays were placed in 24 patients by four dentists. The restorations were luted with two different systems (MD = Definite Multibond + Definite; SV = Syntac + Variolink Ultra, Ivoclar Vivadent, Liechtenstein) without lining. At baseline, after 12, 24, and 48 months, restorations were examined according to modified USPHS scores and criteria.

Results

One patient including three restorations missed the 4 years recall (dropout). After 48 months of clinical service, four restorations in four patients (three luted with Definite, one with Variolink) failed due to inlay fracture (n = 3) and tooth fracture (n = 1), all other fillings were clinically acceptable (survival rate 93.3% for Definite vs. 95.2% for Variolink; Kaplan–Meier algorithm). Except for the rate of hypersensitivity at baseline (MD: 27%; SV 0%; p < 0.05), no differences were evident between the luting cements at any recalls (Mann–Whitney U-test; p > 0.05). Between the four recalls, a statistically significant deterioration was detected for both groups regarding the criteria marginal adaptation, filling integrity (cracks/chippings/fractures), and tooth integrity (Friedman test; p < 0.001). After 4 years, mainly distinct deterioration with marginal fractures or chippings in proximal and marginal areas of the inlays were observed. No differences were found for surface roughness, color matching, and proximal contact (p > 0.05).

Conclusions

For luting of ceramic inlays, only slight differences between the two luting systems were detectable.     

Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents

PurposeThe purpose of this study was to compare the tensile strength of commercially pure titanium dowels and cores cemented with zinc phosphate or resin cements.MethodsTwenty-one extracted human canines were endodontically treated. The root preparations were accomplished using Largo reamers (10 mm in depth and 1.7 mm in diameter). Acrylic resin patterns for the dowel and cores were made, and specimens were cast in commercially pure titanium (n = 7) and divided in three groups: TZ–CP Ti dowels luted with zinc phosphate luting agent, TP–CP Ti dowels luted with Panavia F and TR–CP Ti dowels luted with RelyX U100. Tensile strengths were measured in a universal testing machine at a crosshead speed of 0.5 mm/min. The results (N) were statistically analyzed by ANOVA and Tukey tests (α = 0.01).ResultsThe ANOVA indicated that there were significant differences among the groups tested. A Tukey multiple comparison procedure was performed and revealed statistically significant higher retention values for the dowel luted with RelyX U100 when compared with zinc phosphate or Panavia F.ConclusionCast commercially pure titanium dowels and cores fixed with RelyX U100 cement presented superior bond strength retention when compared to zinc phosphate and Panavia F.     

Effect of types of luting agent on push-out bond strength of zirconium oxide posts

ObjectiveThe aim of this study was to investigate the effect of different luting agents on the bond strength of zirconium oxide posts in root canals after artificial ageing.Material and methodsThirty single-rooted extracted teeth were collected. Post spaces were prepared. Custom milled zirconium oxide posts (Cercon, Degudent) were fabricated. Specimens were divided into 3 groups (n = 10), according to the luting agents used: group RA, conventional resin luting agent (RelyX ARC); group RU, self-adhesive resin luting agent (RelyX Unicem); and group Z, zinc phosphate luting agent (DeTrey). Specimens were subjected to thermocycling and water storage at 37 °C. Specimens were horizontally sectioned into three sections and subjected to a push-out test with 0.5 mm/min crosshead speed. The failure mode was assessed by scanning electron microscopy. Data were analysed by using 2-way ANOVA.ResultsThe following bond strength values were obtained: group RA – 8.89 MPa, group RU – 10.30 MPa and group Z – 9.31 MPa. There was no significant difference in bond strength among the groups (P = 0.500). Adhesive failure mode at the cement/post bonded interface was seen in 100%, 66.67% and 83.3% of examined sections in groups RA, RU and Z, respectively. There was no significant difference in bond strength among different root regions (P = 0.367).ConclusionThe type of luting agent had no significant effect on the push-out bond strength of zirconium oxide posts after artificial ageing.Clinical significanceConventional luting agents, such as zinc phosphate cement, seem to provide comparable retention to resin luting agents for cementing custom milled zirconium oxide posts.     

Curing potential and color stability of different resin-based luting materials

PurposeTo determine the curing potential and color stability of resin-based luting materials for aesthetic restorations.Material and MethodsFour resin-based luting agents were tested: traditional dual-activated resin cement (RelyX ARC, ARC), amine-free dual-activated resin cement (RelyX Ultimate, ULT), light-activated resin cement (RelyX Veneer, VEN), and pre-heated restorative resin composite (Filtek Supreme, PHC). Degree of C = C conversion was determined by infrared spectroscopy (n = 3) with direct light exposure or with interposition of 1.5-mm-thick ceramic (e.max Press HT) between the luting material and light. The curing potential considered the ratio between these two scenarios. Color difference (n = 6) was determined by CIELAB (ΔE_ab) and CIEDE2000 (ΔE₀₀) methods, by spectrophotometer measurements made 24 h after photoactivation and 90 days after storage in water. Data was submitted to ANOVA and Tukey’s test (α = 0.05).ResultsThe luting agents affected both conversion and color stability. With ceramic, ARC produced the highest conversion among the tested groups (75 ± 1%) and the pre-heated composite (PHC) the lowest one (51 ± 3%), but the curing potential was similar for all materials. ULT produced lower ΔE_ab than ARC. PHC presented the lowest color difference when considered both CIELAB and CIE2000 methods (ΔE_ab 2.1 ± 0.4; ΔE₀₀ 1.6 ± 0.2).SignificanceAll luting strategies presented high curing potential. Amine-free dual-activated material was able to reduce color difference than that formulated with the amine component. Pre-heated composite produced the least color variation after storage.     

Influence of curing modes on the degree of conversion and mechanical parameters of dual-cured luting agents

PurposeTo investigate the effects of different curing modes, including tack cure, on the degree of conversion (DC) and mechanical parameters of dual-cured luting agents for all-ceramic restorations.MethodsImmediate light curing, intermittent light curing (2-s tack cure and a 1-min interval before the main cure), delayed light cuing (2-min delay) and chemical or no light curing were used to cure two dual-cured luting agents, RelyX Unicem and PermaCem 2.0, through a 1.5-mm thick lithium disilicate ceramic slide. DC (n = 3), micro-hardness (n = 5), shrinkage strain (n = 4) and shrinkage stress (n = 3) were measured under the aforementioned curing modes. The data were analyzed using two-way ANOVA and post-hoc Tukey HSD test, with the level of significance set at α = 0.05.ResultsFor both luting agents, all the light-curing modes produced similar final DC, but using chemical cure only could significantly reduce the DC. The mechanical parameters followed a similar pattern. There were positive but nonlinear correlations between DC and the other mechanical parameters, with the increase in these parameters with DC being slower initially.ConclusionsProvided adequate light curing is applied to a dual-cured luting agent, delaying the light curing or using a tack cure first to facilitate seating of a restoration may not have a significant impact on the luting agent’s final degree of conversion. However, using chemical cure only may result in inadequate cure of the luting agent and is recommended only for highly opaque restorations.     

Chairside vs. labside ceramic inlays: Effect of temporary restoration and adhesive luting on enamel cracks and marginal integrity

Objectives

To assess the influence of different temporary restorations and luting techniques of labside and chairside ceramic inlays on enamel defects and marginal integrity.

Methods

120 extracted human third molars received MOD preparations with one proximal box each limited in either enamel or dentin. 64 Cerec 2 inlays and 56 IPS Empress I inlays were randomly assigned to the following groups (fabrication mode: chairside (CS) = no temporary restoration (TR), labside (LS) = TR with Luxatemp (L) inserted with TempBond NE, or Systemp.inlay (SI) without temporary cement), luting technique: SV = Syntac/Variolink II, RX = RelyX Unicem: A: Cerec inlays were luted with (1) CS/SV. (2) CS/SV/Heliobond separately light-cured. (3) CS/RX. (4) LS/L/SV. (5) LS/L/RX. (6) LS/SI/SV. (7) LS/SI/RX. (8) LS/SI/RX with selective enamel etching. B: Empress. (9) L/SV. (10) L/SV/Heliobond separately light-cured. (11) L/RX. (12) SI/SV. (13) SI/SV, Heliobond separately lightcured. (14) SI/RX. (15) SI/RX after selective enamel etching. Before and after thermomechanical loading (TML: loading time of TR 1000 × 50 N + 25 thermocycles (TC) between +5 °C and +55 °C; clinical simulation: 100,000 × 50 N + 2500 TC) luting gaps, enamel cracks, and marginal adaptation to enamel and dentin were determined under an SEM microscope (200×) using replicas.

Results

Loading time of temporary restorations negatively affected enamel integrity and enamel chipping (p < 0.05). Luxatemp resulted in less enamel cracks than Systemp.inlay (p < 0.05). Syntac/Variolink achieved better marginal enamel quality than RelyX Unicem in all groups (p < 0.05). Marginal quality in dentin revealed no differences when no temporary cement was used (p > 0.05). Temporary cement negatively affected dentin margins when RelyX Unicem was used (p < 0.05).

Significance

Chairside-fabricated Cerec inlays reduce the risk of enamel cracks and marginal enamel chipping due to omitted temporary restorations. Syntac/Variolink revealed a significantly better performance than RelyX Unicem.     

Frequency of periodontal pathogens in equivalent peri-implant and periodontal clinical statuses

ObjectivesThis study tested the hypotheses that there is: (1) higher bacterial frequency in peri-implantitis/periodontitis, followed by mucositis/gingivitis and peri-implant/periodontal health; (2) similar bacterial frequency between comparable peri-implant and periodontal clinical statuses.Design of studyThe presence of Porphyromonas gingivalis, Tannerella forsythia, Campylobacter rectus, Prevotella intermedia, Treponema denticola and Aggregatibacter actinomycetemcomitans was evaluated in peri-implant (n = 53) and periodontal (n = 53) health; mucositis (n = 50), gingivitis (n = 50), peri-implantitis (n = 50) and periodontitis (n = 50).ResultsThe pattern of peri-implant bacterial frequency was not as expected (peri-implantitis > mucositis > health). Except for P. intermedia (p > 0.05), bacterial frequency was higher in peri-implantitis than health (p < 0.05). The frequency of P.gingivalis and red complex species were higher in peri-implantitis than mucositis (p < 0.05). In periodontal samples, T. forsythia and T. denticola showed the expected pattern of frequency (periodontitis > gingivitis > health). The frequencies of C. rectus and T. forsythia were higher in healthy teeth/gingivitis than healthy implants/mucositis, respectively (p < 0.05). The frequency of P. gingivalis and A. actinomycetemcomitans were similar between periodontitis and peri-implantitis (p > 0.05) while all other species occurrences were higher in periodontitis than peri-implantitis (p < 0.05).ConclusionsBacterial frequency increased from peri-implant/periodontal health to peri-implantitis/periodontitis but not from mucositis/gingivitis to peri-implantitis/periodontitis. There was a trend towards higher bacterial frequency in teeth than implants.     

Effect of water aging on microtensile bond strength of dual-cured resin cements to pre-treated sintered zirconium-oxide ceramics

ObjectivesTo evaluate the hydrolytic stability of different dual-cure resin cements when luted to zirconia ceramic.MethodsEighteen cylinder-shaped zirconia blocks (Cercon Zirconia, Dentsply) were conditioned with: Group 1, no treatment; Group 2, sandblasting (125 μm alumina–Al₂O₃-particles); Group 3, tribochemical silica coating (50 μm silica-modified Al₂O₃ particles). Ceramic blocks were duplicated in composite resin (Tetric Evo Ceram, Ivoclar-Vivadent). Composite disks were luted to pre-treated ceramic surfaces using: (1) Clearfil Esthetic Cement (CEC; Kuraray); (2) Rely X Unicem (RXU; 3M ESPE); (3) Calibra (CAL; Dentsply Caulk). After 24 h, bonded samples were cut into microtensile sticks (1 mm²). Half of the sticks were loaded in tension until failure (cross-head speed of 0.5 mm/min). The remaining half was tested after 6 months of water storage at 37 °C. Data was analyzed with three-way ANOVA and Tukey’s test (P <0.05). Fractographic analysis was performed by SEM.ResultsAfter 24 h, bond strength of CEC to zirconia was significantly higher than that of RXU and CAL, independently from the ceramic pre-treatment (P <0.001). Using CAL, all samples failed prematurely except when luting to sandblasted surfaces. After 6 months of water aging, bond strength of CEC significantly decreased. RXU did not significantly alter bond strengths. Adhesion of sandblasted specimens luted with CAL fell over time. Micromorphological alterations were evident after water storage.SignificanceResin–ceramic interfacial longevity depended on cement selection rather than on surface pre-treatments. CEC and RXU were both suitable for luting zirconia. Water aging played an important role in the durability of zirconia-to-composite chemical bonds.     

Study of the participation of MMP-7, EMMPRIN and cyclophilin A in the pathogenesis of periodontal disease

Background and objectivePeriodontal disease is an infectious disease resulting from the immunoinflammatory response of the host to microorganisms present in the dental biofilm which causes tissue destruction. The objective of this study was to evaluate the immunohistochemical expression of matrix metalloproteinase 7 (MMP-7), extracellular matrix metalloproteinase inducer (EMMPRIN) and cyclophilin A (CypA) in periodontal disease.DesignGingival tissue samples were divided as follows: clinically healthy gingiva (n = 32), biofilm-induced gingivitis (n = 28), and chronic periodontitis (n = 30). Histological sections of 3 μm were submitted to immunoperoxidase method and undergone quantitative analysis. The results were analyzed statistically by the Mann-Whitney and Spearman correlation tests, with the level of significance set at 0.05 (α = 0.05).ResultsImmunopositivity for MMP-7, EMMPRIN and CypA differed significantly between the three groups, with higher percentages of staining in chronic periodontitis specimens, followed by chronic gingivitis and healthy gingiva specimens (p < 0.05). Immunoexpression of CypA and MMP-7 was higher in the intense inflammatory infiltrate observed mainly in cases of periodontitis (p < 0.05). CypA expression was positively correlated with MMP-7 (r = 0.831; p < 0.001) and EMMPRIN (r = 0.289; p = 0.006). In addition, there was a significant positive correlation between probing depth and expression of MMP-7 (r = 0.726; p < 0.001), EMMPRIN (r = 0.345; p = 0.001), and CypA (r = 0.803; p < 0.001).ConclusionThese results suggest that MMP-7, EMMPRIN and CypA are associated with the pathogenesis and progression of periodontal disease.     

“A comparative evaluation between single noncompression titanium miniplate and three dimensional titanium miniplate in treatment of mandibular angle fracture” – A randomized prospective study

PurposeThe aim of this study was to compare efficacy between the single non-compression titanium miniplate and single three-dimensional titanium miniplate in mandibular angle fracture treatment.Method and materialsA prospective study of 20 patients with mandibular angle fractures. Patients were randomly categorized into two groups with 10 patients in each group. Group-I patients were treated with single 2.0 mm conventional titanium miniplate, Group-II patients were treated with single 2.0 mm three-dimensional titanium miniplate according to Champy's principles. Parameters such as stability of fracture fragments, occlusion, mouth opening, additional fixation required and complications were evaluated at different time intervals.ResultsIn Group-I, about 40% (n = 4) of patients showed unstable fracture fragments on immediate postoperative day whereas in Group-II only 10% (n = 1) of patients with fracture instability. In Group-I, 30% (n = 3) had mild occlusal derangement and 20% (n = 2) had deranged occlusion on immediate postoperative day, where as in Group-II only 20% (n = 2) of patients had mild occlusal derangement. Additional fixation required in 30% (n = 3) of patients in group-I, and 10% (n = 1) in Group-II. 20% (n = 2) of patients in Group-I developed infection. All patients in both the groups had inadequate mouth opening on immediate post operative day, later resumed normal mouth opening. 10% (n = 1) in group-I and 20% (n = 2) of patients in group-II presented with postinjury/preoperative inferior alveolar nerve sensory disturbance with no incidence of postoperative sensory disturbance. None of the patients in both the groups had malunion, nonunion, plate fracture, and loosening of plates and screws.Conclusion3-D titanium miniplates showed more favorable results compared to single conventional titanium miniplate with respect to initial interfragmentary stability and complications.     

Middle mesial canals in mandibular first molars: A micro-CT study in different populations

ObjectiveTo describe the morphological aspects of middle mesial canals (MMC) in mandibular first molars using micro-CT.DesignMandibular first molars collected from the Brazilian (n = 136) and Turkish (n = 122) populations were scanned (voxel size: 9.9 μm) and mesial roots with MMC (n = 48) evaluated regarding several morphological aspects. The incidence of MMC in each population was statistically compared using Chi-square test (α = 0.05).ResultsOverall, the incidence of MMC was 18.6% (48 out of 258 molars) and was significantly higher in the Brazilian (n = 30; 22.1%) than in the Turkish (n = 18; 14.8%) population (p < 0.05). In both populations, confluent configuration of the MMC was the most frequent anatomy. Most of the specimens with MMC had 3 independent orifices (n = 26; 54.2%) and 3 apical foramina (n = 21; 43.8%). The mean minor diameter of the MMC orifice (0.16 mm) was 3 times less than the other orifices (∼0.50 mm). In mesial roots with independent configuration (n = 3; 6.3%), the mean volumes (mm³) of the MMC, mesiobuccal (MBC) and mesiolingual (MLC) canals were 0.20 ± 0.10, 0.75 ± 0.28, and 0.88 ± 0.19, respectively. In the specimens with canal confluence (n = 26; 54.2%), MMC merged to the MBC (n = 8; 16.7%), MLC (n = 4; 8.3%), or to both MBC and MLC (n = 14; 29.2%). Double mesial canal was observed in only 1 specimen. MMC with an independent foramen was observed mostly in Brazilian specimens.ConclusionsIncidence of MMC was higher in the Brazilian molars. Confluent configuration was the most prevalent anatomic variation, while independent and fin configurations, as well as, double MMC, were found only in a few specimens.     

Mathematical model for assessing true irradiance received by luting materials while curing through modern CAD/CAM resin composites

Statement of problemMeasurement of irradiance passing through a dental restoration for properly curing a dual- or light-polymerized luting composite is imprecise due to surface reflection.ObjectiveTo provide a mathematical correction of measured transmitted irradiance for predicting true transmitted light intensity through CAD/CAM restorations.MethodsA total of 432 specimens were fabricated. Seven modern CAD/CAM resin-based composites (RBCs) and one CAD/CAM glass-ceramic (control group) were sectioned and polished into specimens of 0.5–5 mm thickness (in 0.5 mm steps, n = 6). Irradiance of a violet-blue LED light curing unit (LCU) (power modes: Standard, High and Plasma) was measured after passing through each specimen with a spectrometer. Data was compared based on 95% confidence intervals and using univariate ANOVA followed by Tukey HSD (α = 0.05).ResultsThe measured transmitted irradiance passing through the specimens decreased exponentially. Significantly highest values of transmitted irradiance were measured for 0.5 mm thick specimens for all materials (p < 0.05). The decadic absorption coefficient for CAD/CAM-RBCs ranged from 0.292 mm⁻¹ to 0.387 mm⁻¹ while the control group (glass-ceramic) reached a significantly lower value of 0.283 mm⁻¹. The reflection ratio for all materials ranged from 12.6% to 18.5%.SignificanceA correction can be implemented to predict the true transmitted irradiance after passing through a dental restoration as function of initial irradiance, specimen thickness and material specific parameters. For a practitioner, this model may be applied depending on the specific treatment conditions, the individual LCU's radiant emittance and restoration thickness for the tested materials.     

Effect of chlorhexidine application on long-term shear bond strength of resin cements to dentin

PurposeThe purpose of this study was to investigate the effect of chlorhexidine [CH] on dentin bond strength of three resin cements after 1 year of water storage.MethodsA flat middle dentin surface was prepared on 120 extracted premolars. The teeth were randomly divided into 6 groups of 20 specimens each according to the resin cement used: Panavia F2.0, Variolink II, and RelyX Unicem, with or without CH application. After cementation of an indirect composite rod [Z250], one subgroup [n = 10] was tested after 24 h in water at 37 °C and the other subgroup [n = 10] was tested after 1 year storage in water plus thermocycling. A shear bond strength [SBS] test was performed. The data [in MPa] were analyzed with ANOVA and Tukey tests [P < 0.05].ResultsThree-way ANOVA [resin cement, CH and time] indicated that Variolink II had the highest strength [16.65 ± 3.60] and RelyX Unicem had the lowest strength [9.30 ± 4.07]. Chlorhexidine application increased SBS [13.31 ± 4.61] compared to samples without CH [12.16 ± 5.04] [P = 0.04]. Initial SBS [15.63 ± 4.37] was significantly higher than after 1 year of storage [9.85 ± 3.36] [P < 0.001]. Separate two-way ANOVA for 24-h and 1-year data showed that cement had a significant effect but CH and its interaction had no significant effect at 24 h, whereas at 1 year the two factors and their interaction differed significantly [P ≤ 0.001].ConclusionsChlorhexidine 2% can diminish the loss of bonding effectiveness over time associated to etch-and-rinse and self-etch cements, although it appears not have any effect on self-adhesive cement.     

Nanohybrid vs. fine hybrid composite in Class II cavities: Clinical results and margin analysis after four years

ObjectivesThis controlled prospective split-mouth study evaluated the clinical behavior of two different resin composites in extended Class II cavities over a period of four years.MethodsThirty patients received 68 direct resin composite restorations (Grandio bonded with Solobond M: n = 36, Tetric Ceram bonded with Syntac: n = 32) by one dentist in a private practice. All restorations were replacement fillings, 24 cavities (35%) revealed no enamel at the bottom of the proximal box, in 33 cavities (48%) the proximal enamel width was less than 0.5 mm. The restorations were examined according to modified USPHS criteria at baseline, and after six months, one, two, and four years. At each recall, impressions were taken for replica preparation. Replicas of 44 select subjects were assessed for marginal quality under a stereo light microscope (SLM) at 130× and 22 replicas were assessed under a scanning electron microscope (SEM) at 200×.ResultsBoth recall rate and survival rate were 100% after four years of clinical service. No significant difference was found between the restorative materials (p > 0.05; Mann–Whitney U-test). Hypersensitivities were significantly reduced over time (p < 0.05; Friedman test). A significant deterioration over time was found for the criteria marginal integrity (66% bravo after four years), tooth integrity (15% bravo), filling integrity (73% bravo) and proximal contact (p < 0.05; Friedman test). SLM and SEM analysis of restoration margins revealed differences in the amount of perfect margins, in favor of Tetric Ceram (p < 0.05).SignificancesBoth materials performed satisfactorily over the four-year observation period. Due to the extension of the restorations, wear was clearly visible after four years of clinical service with 50% bravo ratings.     

Effect of fluoride toothpaste with nano-sized trimetaphosphate on enamel demineralization: An in vitro study

ObjectiveThis study evaluated the effect of toothpastes containing 1100 ppm F associated or not with micrometric or nano-sized sodium trimetaphosphate (TMP) on enamel demineralization in vitro, using a pH cycling model.DesignBovine enamel blocks (4 mm × 4 mm, n = 96) were randomly allocated into eight groups (n = 12), according to the test toothpastes: Placebo (without fluoride or TMP); 1100 ppm F (1100F); 1100F plus micrometric TMP at concentrations of 1%, 3% or 6%; and 1100F plus nanosized TMP at 1%, 3% or 6%. Blocks were treated 2×/day with slurries of toothpastes and submitted to a pH cycling regimen for five days. Next, final surface hardness (SHf), integrated hardness loss (IHL), differential profile of integrated hardness loss (ΔIHL) and enamel fluoride (F) concentrations were determined. Data were analyzed by ANOVA and Student-Newman-Keuls’ test (p < 0.05).ResultsThe use of 1100F/3%TMPnano led to SHf 30% higher (p < 0.001) and IHL ∼ 80% lower (p < 0.001) when compared to 1100F. This toothpaste also resulted in ∼64% reduction of mineral loss (ΔIHL) when compared to 1100F. Moreover, the addition of nano-sized TMP promoted increases in enamel F uptake of 90%, 160% and 100%, respectively for the concentrations of 1%, 3% and 6%, when compared to 1100F (p < 0.001).ConclusionThe addition of nano-sized TMP at 3% to a conventional toothpaste significantly decreased enamel demineralization when compared to its counterparts without TMP or supplemented with micrometric TMP.     

Effects of polyphosphates and fluoride on hydroxyapatite dissolution: A pH-stat investigation

ObjectivesThis study investigated the immediate and sustained effect of sodium trimetaphosphate (TMP) and sodium hexametaphosphate (HMP) associated or not with fluoride (F) on hydroxyapatite (HA) dissolution using an erosion-like model, considering as well as the influence of salivary coating.DesignBaseline dissolution rates were determined for HA discs using a pH-stat system. In the first set of experiments, HA discs were treated with 1100 μg F/mL, 1% or 8% of HMP, 1% or 8% of TMP and 1100 μg F/mL associated with 1% or 8% of HMP or TMP, totaling 9 groups (n = 8). In a second phase, HA discs were kept in pooled human saliva at 37 °C for 2 h before treatment with deionised water and 1100 μg F/mL associated with 1% or 8% of HMP or TMP, totaling 5 groups (n = 8). The post-treatment dissolution rate was determined from three consecutive 30-min assays. Data were analysed using 2 and 3-way ANOVA followed by Fisher and Holm–Sidak methods, respectively (α = 0.05).ResultsAll test solutions promoted reduction in HA dissolution rate when compared to baseline control in the first post-treatment run (p < 0.001). However, a synergistic effect was only observed between fluoride and 1% HMP. Moreover, the duration of inhibitory effect was greater when 8% HMP and 1 or 8% HMP associated with F were assessed (p < 0.001). The presence of salivary coating led to higher protection for all groups when compared to discs without coating (p < 0.001).ConclusionThe reduction of HA dissolution rate, as well as the duration of this effect were influenced by fluoride, type and concentration of phosphate salt and the presence of a salivary coating.     

Influence of mandibular residual ridge resorption on objective masticatory measures of lingualized and fully bilateral balanced denture articulation

PurposeTo assess the influence of mandibular residual ridge resorption (RRR) on objective masticatory measures of two occlusal schemes: lingualized occlusion (LO) and fully bilateral balanced articulation (FBBA).MethodsThe enrolled patients (n = 22) were randomly allocated one set of complete dentures with either LO or FBBA. Maximum occlusal force, masticatory performance (by the MPI), and mandibular movements were measured at 3- and 6-month follow-ups. Mandibular RRR was assessed as the sum of the mandibular bone height at the midline, first premolar region, and least vertical height region, and from the mental foramen to the alveolar crest, measured on panoramic radiographs; the treatment groups were subclassified into severe or moderate RRR subgroups by the value of the sum of individual measurements.ResultsSignificant differences were observed in the between-subgroup comparisons (Kruskal–Wallis test) of the MPI (3 months, p = 0.01; 6 months, p = 0.04) and linear deviation from intercuspal position (anterior–posterior: 6 months, p = 0.01; inferior–superior: 3 months, p = 0.008; 6 months, p = 0.02). The patients with severe RRR in the FBBA group showed a significant decrease in the MPI and increase in linear inferior deviation from intercuspal position at 3 months (post hoc comparison) as well as a significant increase in the linear posterior and inferior deviation from intercuspal position at 6 months.ConclusionsLO is the preferable occlusal scheme for patients with severe RRR. (This trial has been registered at http://clinicaltrials.gov/ct2/show/NCT00959530.)     

Impact of high-speed sintering,layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns

ObjectiveTo investigate the impact of high-speed sintering, layer thickness and artificial aging in a chewing simulator on the fracture load (FL) and two-body wear (2BW) of 4Y-TZP crowns.Methods4Y-TZP crowns (Ceramill Zolid HT+, Amann Girrbach AG) in three different layer thicknesses (0.5, 1.0, 1.5; N = 192, n = 64/group) were manufactured using CAD/CAM technology and sintered at 1580 °C (high-speed sintering) or 1450 °C (control group). Specimens were polished in two-steps and bonded to standardized CoCr abutments with Multilink Automix (Ivoclar Vivadent). 2BW after 6000 thermo- and 1,200,000 chewing-cycles employing enamel antagonists was determined using best fit machining. FL was tested before and after artificial aging. Univariate ANOVAs, post hoc Scheffé, unpaired t-, Kruskal–Wallis- and Mann–Whitney-U-test were computed (p < 0.05).ResultsHigh-speed sintering resulted in less 2BW of the zirconia than the control group (p = 0.013). High-speed sintering (p = 0.001–0.006) and an increase in layer thickness (p < 0.001–0.012) resulted in higher FL values, while artificial aging led to a reduction of FL (p < 0.001).SignificanceAs high-speed sintering resulted in less two-body wear of the zirconia and comparable or even higher fracture load results than the control group, this cost- and time efficient alternative presents promising mechanical results.     

Efficacy in reducing dentine hypersensitivity of a regimen using a toothpaste containing 8% arginine and calcium carbonate,a mouthwash containing 0.8% arginine,pyrophosphate and PVM/MA copolymer and a toothbrush compared to potassium and negative control regimens: An eight-week randomized clinical trial

ObjectiveEvaluate the efficacy of three regimens integrating toothpaste, toothbrush and mouthwash in reducing dentine hypersensitivity.MethodsEight-week single-centre, three-cell, double-blind, randomized study was conducted in the Dominican Republic. Subjects entered one of the three regimens: (1) toothpaste containing 8% arginine and 1450 ppm mono-fluorophosphate, in a calcium carbonate base, a soft-bristle toothbrush followed by a mouthwash containing 0.8% arginine, PVM/MA copolymer, pyrophosphates, and 0.05% sodium fluoride; (2) toothpaste containing 5% potassium nitrate and 1450 ppm sodium fluoride, a soft-bristle toothbrush, followed by a mouthwash containing 0.51% potassium chloride and 230 ppm sodium fluoride; and (3) toothpaste containing 1450 ppm mono-fluorophosphate, a soft-bristle toothbrush followed by a fluoride/arginine free mouthwash. Tactile and Air-Blast dentine hypersensitivity measurements were performed at baseline, two, four, and eight weeks. For treatment group comparisons, ANCOVA and post hoc Tukey's pair-wise (α = 0.05) were used. Kaplan–Meier survival analysis was performed to evaluate Time to Treatment Improvement.Results120 subjects were enrolled, 118 completed the study. The Tactile hypersensitivity mean scores showed statistically significant improvement at two, four and eight (p ≤ 0.001) weeks in the arginine regime; the potassium regime did not show significant (p ≥ 0.05) improvement. Air-Blast Hypersensitivity scores had a statistically significant decrease at two (p = 0.006), four (p = 0.006) and eight (p = 0.002) weeks in arginine and potassium regimes (p ≤ 0.05). The most effective treatment proved to be arginine (p ≤ 0.05) compared to the potassium regime.ConclusionArginine regimen provided the greatest reduction in Tactile and Air-Blast dentine hypersensitivity compared to potassium and negative control regimens; and provides faster dentine hypersensitivity relief than potassium regimen.     

Microhardness of resin cements in the intraradicular environment: Effects of water storage and softening treament

ObjectivesTo analyze the microhardness of four dual-cure resin cements used for cementing fiber-reinforced posts under the following conditions: after 7 days of storage in water, after additional 24 h of immersion in 75% ethanol, and after 3 months of storage in water. Hardness measurements were taken at the cervical, middle and apical thirds along the cement line.MethodsRoot canals of 40 bovine incisors were prepared for post space. Fibrekor^® glass fiber-reinforced posts (Jeneric/Pentron) of 1 mm in diameter were cemented using Panavia F 2.0 (Kuraray), Variolink (Ivoclar-Vivadent), Rely X Unicem (3M ESPE) or Duolink (Bisco) (N = 10). After 7 days of water storage at 37 °C, half the sample (N = 5) was longitudinally sectioned and the initial microhardness measured along the cement line from cervical to apex. These same samples were further immersed in 75% ethanol for 24 h and reassessed. The remaining half (N = 5) was kept unsectioned in deionized water at 37 °C for 3 months, followed by sectioning and measuring. Data were analyzed by a series of two-way ANOVA and Tukey tests at α = 5%.ResultsStatistically significant differences were identified among the cements, thirds and conditions. Significant interactions were also observed between cements and thirds and between cements and conditions. Panavia F exhibited significantly higher initial microhardness than the other three cements, which showed no statistical difference among themselves. Variolink and Duolink showed significantly higher microhardness values in the cervical third, without significant difference among the thirds for the other cements. Immersion in ethanol significantly reduced the hardness values for all cements, regardless of the thirds. Storage in water for 3 months had no influence on the hardness of most of the cements, with the exception of Unicem that showed a significant increase in the hardness values after this period.SignificanceResults showed heterogeneity in the microhardness of the cements inside the canal. All cements presented some degree of softening after ethanol treatment, which suggests instability of the polymer. The quality of curing of resin cements in the root canal environment seems unpredictable and highly material dependent.