Dentinal Tubule Penetration and Retreatability of a Calcium Silicate–based Sealer Tested in Bulk or with Different Main Core Material

IntroductionThe aim of this study was 2-fold: to evaluate the penetration of a tricalcium silicate–based endodontic sealer (EndoSequence BC Sealer; Brasseler USA, Savannah, GA) into dentinal tubules without a core material (sealer) or with .02 or .04 tapered bioceramic gutta-percha points and to compare the time required to remove the root fillings .MethodsRoots of extracted human mandibular incisors (N = 60) were prepared with 0.04 taper nickel-titanium rotary files to #35 and randomly assigned into 3 groups (n = 10/group) according to the obturation method used:1. obturating with sealer only,2. sealer + .02 point, and3. sealer + .04 point. The sealer was labeled with rhodamine B for analyzing dentinal tubule penetration under a confocal laser scanning microscope. The remaining specimens (n = 30) were used to measure the time for removal of the root canal fillings with retreatment files. The data were analyzed using 1-way analysis of variance and post hoc Games-Howell tests for dentinal tubule penetration and the Kruskal-Wallis test for retreatment time.ResultsSignificantly greater sealer penetration and sealer-penetrated area was achieved when the sealer was used with a .04 gutta point (P < .05), whereas there was no difference between the sealer and .02 gutta point groups (P > .05). All test groups showed a similar depth of sealer penetration (P > .05). Groups with the gutta-percha points required a similar time to remove root filling (P > .05), whereas the working length could not be achieved in the sealer group.ConclusionsThe use of a matched-taper bioceramic gutta-percha point enhanced the dentinal tubule penetration of the tested tricalcium silicate–based sealer. The use of a core material in conjunction with sealer facilitates removal of the root filling to the working length.     

Impact of Dentin Substrate Modification with Chitosan-Hydroxyapatite Precursor Nanocomplexes on Sealer Penetration and Tensile Strength

IntroductionThe purpose of this study was to evaluate the effect of dentin conditioning with chitosan-hydroxyapatite precursor (C-HA) nanocomplexes on the depth of tricalcium silicate sealer penetration into dentinal tubules and ultimate tensile strength (UTS).Methodssurface charge and size distribution for C-HA nanocomplex formulation was evaluated followed by bioactivity assessment of standardized films of C-HA nanocomplexes (n = 15) incubated in simulated body fluid. Mineralization potential was assessed with X-ray diffraction and Fourier-transform infrared spectroscopy, whereas scanning electron microscopy was used for ultrastructural evaluation. Static water contact angles and UTS were measured on dentin discs (n = 2/group) and dentin beams (n = 10/group) treated with/without sodium hypochlorite/EDTA and C-HA nanocomplex conditioning. In phase 2, the depth of sealer penetration after C-HA nanocomplex conditioning was evaluated using fluorescent imaging (n = 12/group). The percent area penetration and mean/maximum penetration depth were calculated at 4- and 6-mm levels from the root apex. Data from contact angle measurements, mechanical testing, and penetration assessment parameters were subjected to the independent samples t test with a significance level set at P < .05.ResultsA formulation of C-HA nanocomplexes (2 mg/mL) was chosen as a polyanionic, hydrophilic, nonaggregating concentration having bioactivity potential established through the formation of phosphate/carbonate bonds and the crystalline nature of the formed minerals. A significantly lower contact angle and higher UTS were registered for the C-HA nanocomplex–conditioned group (P < .05). Statistically significant (P < .05) greater sealer penetration was recorded at the 4-mm level for all assessment parameters and percent area penetration at 6 mm for the C-HA nanocomplex group.ConclusionsC-HA nanocomplex conditioning enhances dentin surface wettability to facilitate greater tricalcium silicate sealer penetration and UTS of dentin.     

Penetration of dentinal tubules by endodontic sealer cements in extracted teeth and in vivo

AIM: To compare the depth and consistency of penetration of three different root canal sealer cements into dentinal tubules in extracted teeth and to measure the penetration of an epoxy resin-based sealer cement in vivo. METHODOLOGY: Root canals of 50 extracted human pre-molar teeth were prepared and obturated using three different sealer cements based on epoxy resin (AH26), zinc oxide eugenol (Pulp Canal Sealer EWT) and methacrylate resin (EndoREZ). Five teeth filled without sealer were used as controls. Teeth were sectioned and prepared for observation using scanning electron microscopy. A further 12 teeth with a history of successful root filling and subsequent extraction were collected and sectioned. The depth of sealer penetration into dentinal tubules was measured and the consistency and appearance of the sealer within the tubules observed. RESULTS: AH26 demonstrated the deepest penetration (1337 microm), followed by EndoREZ (863 microm) and Pulp Canal Sealer EWT (71 microm). The difference in penetration between all sealer groups was found to be statistically significant (P < 0.05). The resin-based sealers appeared to penetrate tubules more consistently. In the clinical cases, all teeth demonstrated sealer penetration to varying depths (98-1490 microm). CONCLUSIONS: The depth and consistency of dentinal tubule penetration of sealer cements appears to be influenced by the chemical and physical characteristics of the materials. Resin-based sealers displayed deeper and more consistent penetration. Penetration depths observed for the epoxy resin-based sealer in vivo were consistent with that found in the experimental model.     

Influence of Ultrasonic Activation of 4 Root Canal Sealers on the Filling Quality

Introduction

The purpose of this study was to evaluate the effects of ultrasonic activation on the filling quality (intratubular sealer penetration, interfacial adaptation, and presence of voids) of 4 epoxy resin–based sealers.

Methods

Eighty-four extracted human canines were divided into 4 groups (n = 20) according to the sealer used to obturate the root canals instrumented with F5 ProTaper instruments (50/05) (Dentsply Maillefer, Ballaigues, Switzerland). The canals were filled by the lateral compaction technique. Previously, the sealers were labeled with rhodamine B dye to allow analysis under a confocal microscope. At the time of obturation, the specimens were divided again into 2 groups (n = 10) according to the ultrasonic activation of the sealers: ultrasonically activated and nonultrasonically activated groups. All samples were sectioned at 2, 4, and 6 mm from the apex. The percentages of voids, gaps, and dentinal sealer penetration segments of the canal were analyzed.

Results

Regarding the sealer penetration segments, there was a significant increase for the AH Plus (Dentsply Maillefer), Acroseal (Specialités Septodont, Saint Maur-des-Fossés, France), and Sealer 26 (Dentsply Maillefer) at the 4-mm level and the AH Plus and Sealer 26 at the 6-mm level with ultrasonic activation (P < .05). Concerning the gaps, the ultrasonic activation promoted a smaller presence for all sealers at the 4- and 6-mm levels (P < .05). No statistical significant differences were found for the percentages of voids (P < .05).

Conclusions

The use of ultrasonic activation of an epoxy resin–based sealer promoted greater dentinal sealer penetration and less presence of gaps.     

A Novel Polyurethane Expandable Root Canal Sealer

IntroductionEndodontic sealers play a vital role in the obturation of root canal space. The aim of this study was to evaluate the utility of a recently developed polyurethane expandable sealer (PES), along with its cytotoxicity and dimensional changes.MethodsL929 fibroblasts and an cell viability assay (MTS assay) were used to determine the cytotoxicity of dental sealers (AH Plus [Dentsply Maillefer, Ballaigues, Switzerland], Sure-Seal Root [Sure Dent Corporation, Gyeonggi-do, South Korea], and the PES) at 24, 48, 72, and 96 hours. An advanced choroidal neovascularization model was used to assess the effect of these sealers on angiogenesis. Thirty-six extracted single-rooted human teeth were prepared and randomly divided into 3 groups (n = 12). Obturation was performed with gutta-percha and a sealer using lateral compaction as follows: group 1, AH Plus; group 2, Sure-Seal; and group 3, PES. The average depth of sealer penetration into dentinal tubules was measured with a scanning electron microscope. Data were analyzed using 1-way analysis of variance and post hoc Tukey tests (level of significance, P < .05).ResultsThe values of MTS, choroidal neovascularization, and the penetration depth of PES were significantly higher than in other experimental groups (P < .05). The lowest values were noted in specimens of AH Plus, whereas the highest were detected in the PES group.ConclusionsPES showed promising results in terms of biocompatibility and dentinal tubule adaptation and penetration.     

Effect of the Nd:YAG laser on sealer penetration into root canal surfaces: A confocal microscope analysis

Objectives

The objective of this in vitro study was to evaluate the use of the Neodymium:Yttrium-Aluminium-Garnet (Nd:YAG) laser as part of the root canal treatment on the penetration of sealer into dentinal tubules.

Methods

Eighty extracted lower premolars were randomly assigned to two groups (n = 40 each): Control group (CG), subjected to a conventional protocol of endodontic instrumentation and obturation; and Laser group (LG), in which Nd:YAG laser irradiations were combined with conventional preparation and obturation. Endodonted samples were sectioned at 3 and 5 mm from the apex and observed under a confocal scanning microscope (CLSM). The penetration depth into the dentinal tubules and the extension of the intracanal perimeter infiltrated by sealer were measured. The Student–Newman–Keuls test was run for between-group comparisons (α = .05).

Results

The depth of sealer penetration into dentinal tubules did not differ among groups. LG samples showed the significantly highest percentage of penetrated perimeter at 3 mm from the root apex. Within each group, the greatest depth of penetration (P = .0001), and the major percentage of penetrated perimeter (P < .001), were recorded at 5 mm.

Conclusions

The application of the Nd:YAG laser after instrumentation did not improve the depth of sealer penetration into the dentinal tubules. The laser enlarged the total penetrable perimeter near the apex.

Clinical significance

The Nd:YAG laser may be an appropriate complement in root canal treatment, as it enhances the sealer adaptation to the dentinal walls in the proximity of the apex.     

Sealer Penetration into Dentinal Tubules in the Presence or Absence of Smear Layer: A Confocal Laser Scanning Microscopic Study

Introduction

The aim of this study was to test the dentinal tubule penetration of AH26 (Dentsply DeTrey, Konstanz, Germany) and MTA Fillapex (Angelus, Londrina, PR, Brazil) in instrumented root canals obturated by using cold lateral compaction or warm vertical compaction techniques in either the presence or absence of the smear layer.

Methods

Forty-five extracted single-rooted human mandibular premolar teeth were used. The crowns were removed, and the root canals were instrumented by using the Self-Adjusting File (ReDent-Nova, Ra'anana, Israel) with continuous sodium hypochlorite (2.6%) irrigation. Final irrigation was either with 5% EDTA or with sodium hypochlorite. The canals were dried and obturated by using rhodamine B–labeled AH26 or MTA Fillapex in combination with the cold lateral compaction or the warm vertical compaction technique. After setting, the roots were sectioned horizontally at 4-, 8-, and 12-mm distances from the apical tip. On each section, sealer penetration in the dentinal tubules was measured by using confocal laser scanning microscopy.

Results

Regardless of the usage of EDTA, MTA Fillapex, compared with AH26, was associated with greater sealer penetration when used with the cold lateral compaction technique, and, conversely, AH26, compared with MTA Fillapex, was associated with greater sealer penetration when used with the warm vertical compaction technique (P < .05). Removal of the smear layer increased the penetration depth of MTA Fillapex used with the cold lateral compaction technique (P < .05); however, it had no significant effect on the penetration depth of AH26.

Conclusions

Greater sealer penetration could be achieved with either the MTA Fillapex–cold lateral compaction combination or with the AH26–warm vertical compaction combination. Smear layer removal was critical for the penetration of MTA Fillapex; however, the same did not hold for AH26.     

The Effect of Primary Root Canal Treatment on Dentinal Tubule Penetration of Calcium Silicate–based Sealers during Endodontic Retreatment

IntroductionThe aim of this study was to evaluate the effect of previous root canal treatment on dentinal tubule penetration of calcium silicate–based sealers during endodontic retreatment and to compare 2 different (commonly used and modified) tubule penetration depth measurement techniques.MethodsThe crowns of mandibular premolar teeth were removed, and root canals were prepared (ProTaper Universal; Dentsply Sirona, York, PA) and obturated using AH Plus (AH; Dentsply DeTrey, Konstanz, Germany), MTA Fillapex (MTAF; Angelus, Londrina, Brazil), and WellRoot ST (WRST; Vericom, Gyeonggi-do, South Korea); 0.1% red Rhod-2 dye (Chemodex, St Gallen, Switzerland) was added to the sealers. After storage for 3 weeks (37°C, 100% humid), the following sealer combination subgroups were created (the sealer used during the primary root canal treatment/the sealer used during the retreatment, n = 8): AH/AH, AH/MTAF, and AH/WRST; MTAF/AH, MTAF/MTAF, and MTAF/WRST; and WRST/AH, WRST/MTAF, and WRST/WRST. Green Fluo-3 dye (0.1%) was added to the sealers during retreatment. Sealer penetration depths were measured at 8 points and averaged, and the ratio of the retreatment sealer to the initial sealer was recorded as the mean tubule penetration depth ratio in the first technique, whereas the percentage of the circumferential penetration area ratios of the retreatment and initial sealers was calculated in the second technique. Statistical analyses were performed using Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests.ResultsThe mean penetration depth of AH and MTFA was found to be higher at the coronal third region in the control groups (P < .05). Both methods showed a significant difference among the groups at the coronal and median regions (P < .05). The AH/WRST, MTAH/AH, MTAF/MTAF, MTAF/WRSTS, and WRST/WRST groups showed deeper tubule penetration (first technique, P = .01). Both techniques showed that the penetration depth of the sealers was the same at the apical region (P > .05), whereas a difference was found among the techniques at the coronal and median regions. The sealers used in the previous root canal treatment limited the penetration depth of the sealers used during the retreatment process (P < .05). When MTAF was used as the initial sealer, the penetration depth of the second sealer did not change, whereas if WRST was the initial sealer, the penetration depth of the sealers at the median and apical regions is negatively affected during the retreatment process (P < .05).ConclusionsPrevious root canal treatment affects the penetration depth of calcium silicate–based sealers. The use of AH Plus and MTA Fillapex during the retreatment process showed an advantage. Both measurement techniques showed similar performances at the apical region, whereas the results varied at the coronal and midcoronal regions; therefore, a more stable sealer penetration measurement technique is still necessary.     

Penetration of Epiphany, Epiphany self-etch, and AH Plus into dentinal tubules: a scanning electron microscopy study

Introduction

The purpose of this study was to measure the average depth of dentinal tubule sealer penetration in the middle third of teeth obturated with gutta-percha/AH Plus (Dentsply, DeTrey, Konstanz, Germany), Resilon/Epiphany (Pentron Clinical Technologies, Wallingford, CT), and Resilon/Epiphany self-etch (SE) using scanning electron microscopy (SEM).

Methods

The root canals of 36 extracted single-rooted human teeth were prepared and randomly divided into three groups. Obturations were performed with the following filling materials using the lateral compaction technique: group 1, gutta-percha/AH Plus; group 2, Resilon/Epiphany; and group 3, Resilon/Epiphany SE. The specimens were prepared for SEM examination. The average depth of sealer penetration into the dentinal tubules was measured. Data were analyzed by one-way analysis of variance and a post hoc Tukey test.

Results

The mean (± standard deviation) values for the average depth of sealer penetration in the middle third of the roots were 22.07 ± 6.92 μm, 31.56 ± 6.80 μm, and 21.50 ± 9.25 μm for AH Plus, Epiphany, and Epiphany SE, respectively. The average penetration depth of Epiphany was significantly higher than that of Epiphany SE and AH Plus (P < .05). There was no significant difference between the penetration depth of Epiphany SE and AH Plus (P > .05).

Conclusions

It could be concluded that the average penetration for Epiphany into dentinal tubules within the middle third of the roots was significantly deeper than that of Epiphany SE and AH Plus.     

Effect of Calcium Hydroxide Dressing on the Dentinal Tubule Penetration of 2 Different Root Canal Sealers: A Confocal Laser Scanning Microscopic Study

Introduction

The purpose of this study was to evaluate the effect of calcium hydroxide (Ca[OH]₂) dressing on the dentinal tubule penetration of epoxy resin–based sealer (AH 26; Dentsply Maillefer, Ballaigues, Switzerland) and tricalcium silicate–based sealer (BioRoot RCS; Septodont, Saint Maurdes Fosses, France).

The effect of an additional application of sealer prior to backfilling in the Continuous Wave of Condensation technique

An additional sealer application was investigated prior to backfilling with the Continuous Wave of Condensation (CWC). 105 Palatal roots were sectioned and prepared to a file size 40, 0.06 taper with Vortex Blue® files. Groups A, B and C had a single sealer application before while groups D, E and F, received a second application of dyed sealer prior to backfilling. Roots were sectioned at 2,3,4,6,7 and 8 mm from the root apex. The percentage of sealer and dentinal tubular penetration depth was calculated at each level. At each ascending level, the sealer percentage decreased for each experimental group while the number of outer third penetration depths increased when all groups were combined. An additional sealer application prior to backfilling had minimal effect on the percentage of sealer or outer third penetration depths and can be considered a clinical preference rather than an imperative step with the CWC technique.     

Apical dye penetration with four root canal sealers and gutta-percha using longitudinal sectioning.

The purpose of this study was to compare the level of apical dye penetration when different sealers were used with lateral condensation of gutta-percha. Fifty teeth with single root canals were biomechanically prepared using the step-back technique and irrigation with 15% ethylenediaminetetraacetic acid with cetrimide and 1% NaOCl solutions. The teeth were divided into five groups of 10 teeth each. The control group root canals were filled with laterally condensed gutta-percha without sealer and the other four groups were filled with laterally condensed gutta-percha and either Apexit, Sealapex, Tubli-Seal, or AH-26 sealer. After storage in 100% humidity at 37 degrees C for 48 h, the root surfaces were coated with nail varnish (except at the apex), placed in 2% methylene blue dye solution, and centrifuged at 30 x g for 3 min. The roots were sectioned longitudinally to determine the following mean levels of dye penetration: AH-26, 0.48 mm; Apexit, 1.33 mm; Sealapex, 4.59 mm; Tubli-Seal, 5.58 mm; and gutta-percha alone, 7.99 mm. This study demonstrated that a root canal sealer should be used in conjunction with laterally condensed gutta-percha and that AH-26 sealer had significantly less dye penetration than the other three sealers while Apexit had significantly less dye penetration than Sealapex and Tubli-Seal. There was no significant difference between Sealapex and Tubli-Seal.     

Dentinal tubule penetration of AH Plus,BC Sealer and a novel tricalcium silicate sealer: a confocal laser scanning microscopy study

Objectives

The aim of this in vitro study was to assess the dentinal tubule penetration of three different sealers, AH Plus, BC Sealer and a novel tricalcium silicate sealer (NTS).

Materials and methods

Ninety-six human maxillary central incisors were divided into three experimental groups (n = 32) and were filled with gutta-percha using a single-cone technique in conjunction with one of the three sealers: AH Plus, BC Sealer or NTS. The roots in each group were cross-sectioned at 1 and 5 mm from the root apex, and the surfaces were examined under confocal laser scanning microscopy (CLSM). The sealer penetration depths were measured at their maximum depths and at four circumferential depths (12, 3, 6 and 9 o’clock) and were evaluated using ImageJ software (ImageJ, NIH).

Results

The maximum and mean penetration depths were significantly higher at 5 mm compared to 1 mm from the apex in the AH Plus (p < 0.001), BC Sealer (p < 0.001) and NTS groups (p < 0.001). No significant difference was observed between the groups at 1 mm for both parameters. The maximum and mean penetration depths were significantly lower at 5 mm for AH Plus compared with the other two groups (p = 0.012).

Conclusions

Within the study limitations, the BC Sealer and NTS demonstrated better tubule penetration results than the AH Plus sealer.

Clinical relevance

Although no study has confirmed a relationship between the penetration depth of root canal sealers and the prevention of apical periodontitis, dentinal tubule sealer penetration may improve obturation quality.

     

Evaluation of penetration and adaptation of three different sealers: a SEM study

In this study, dentinal penetration and adaptation of three endodontic sealers were evaluated by using scanning electron microscope (SEM). Seventeen recently extracted, human maxillary anterior teeth were used. After the crowns were removed from the cementoenamel junction, the root canals were instrumented. The teeth were then randomly divided into three groups of five roots each and two teeth were used as controls. The smear layer was removed with EDTA and NaOCl. The canals were obturated with AH 26, CRCS, RSA sealers and gutta-percha using lateral condensation technique. Each root was sectioned longitudinally and then prepared for SEM evaluation. The SEM results showed that AH 26 was the best sealer penetrating into dentinal tubules and adapted to dentinal walls when compared with the CRCS and RSA. The CRCS and RSA occluded the orificies of dentinal tubules. The RSA showed that the penetration was less than AH 26 and more than CRCS.     

Micro–computed Tomographic Evaluation of Dentinal Microcracks after Preparation of Curved Root Canals with ProTaper Gold,WaveOne Gold,and ProTaper Next Instruments

IntroductionThe aim of this study was to evaluate the influence of rotary (ProTaper Next [PTN; Dentsply Maillefer, Ballaigues, Switzerland] and ProTaper Gold [PTG, Dentsply Maillefer]) and reciprocating (WaveOne Gold [WOG, Dentsply Maillefer]) systems in dentinal microcrack generation after the preparation of curved root canals using micro–computed tomographic analysis.MethodsTwenty-four human mandibular molars with curved roots were scanned in a micro–computed tomographic device using an isotropic resolution of 6.78 μm and randomly assigned into 1 of 3 experimental groups (n = 8) according to the root canal instrumentation system used (PTN, PTG, or WOG). Then, the root canals were prepared up to PTN X2, PTG F2, and WOG Primary instruments in the PTN, PTG, and WOG groups, respectively. After canal preparation, each specimen was scanned again. Pre- and postoperative cross-sectional images of the roots (N = 35,304) were analyzed to identify the presence of dentinal microcracks.ResultsOverall, 26% of the images presented dentinal defects (n = 9188). Dentinal microcracks were observed in 24.6%, 26%, and 27.4% of the postinstrumentation images from the PTN, PTG, and WOG groups, respectively. However, all of these dentinal microcracks were already present in the corresponding preoperative images. No new microcracks were generated after the preparation of curved root canals of mandibular molars using the aforementioned systems.ConclusionsRoot canal instrumentation with PTN, PTG, and WOG systems did not induce the formation of new dentinal microcracks.     

Effect of obturation technique on sealer cement thickness and dentinal tubule penetration

AIM: To compare the average sealer cement film thickness and the extent and pattern of sealer penetration into dentinal tubules in association with four obturation techniques in curved root canals. METHODOLOGY: Mesial canals of 44 extracted mandibular molars were randomly divided among the SimpliFill, continuous wave, Thermafil and 0.04 matched taper (master cones) lateral compaction obturation groups (22 canals per group). AH26 sealer cement was coloured blue-black using Sudan Black B dye. Roots were sectioned 1, 3 and 5 mm from the working length. Specimens were photographed under 25x magnification, mounted as 35 mm slides and projected. Average sealer cement thickness (measured at 10 points around the canal wall), depth of dentinal tubule penetration and frequency of voids were determined at the 1, 3 and 5 mm levels. Data were analysed statistically for effect of obturation technique and level of section on sealer thickness and on the depth and distribution of tubule penetration. RESULTS: Thermafil demonstrated superior GP adaptation at all levels with a mean overall sealer cement thickness of 2.2 microm, followed by lateral compaction (11.1 microm), continuous wave (12.2 microm) and SimpliFill (47.6 microm). SimpliFill also demonstrated the highest frequency of voids (P < 0.05). Sealer cement penetrated dentinal tubules as far as the outer one-third of dentine, with greater penetration observed buccally or lingually (P < 0.001). Penetration was not significantly affected by obturation technique, but on average was deeper and more frequent at the 3 and 5 mm levels than at the 1 mm level (P < 0.001). CONCLUSIONS: Sealer thickness was strongly dependent on obturation technique. Assuming that minimal sealer thickness and fewer voids are good measures of long-term sealing ability, Thermafil resulted in the best outcome. Consistent, extensive sealer penetration into dentinal tubules was seen and was unrelated to the obturation technique.     

An in vitro study of apical and coronal microleakage of laterally condensed gutta percha with Ketac-Endo and AH-26

The purpose of this in vitro study was to compare both apical and coronal dye penetration when Ketac-Endo and AH-26 sealers were user with laterally condensed gutta percha. Crowns were removed from 28 teeth and the root canals were biomechanically prepared. The teeth were divided into two groups of 12 teeth. each and a control group of 4 teeth. Root canals in the two experimental groups were filled with laterally condensed gutta percha and either Ketac-Endo or AH-26 sealer. The ketac-Endo group had the coronal 3 mm of gutta percha and sealer removed and the resultant cavity was filled with Ketc-Endo alone. After the sealers had set, the root surfaces were coated with nail varnish except at the apex and at the coronal end. Positive control had no root fillings and were coated with nail varnish in the same manner while the negative controls were sealed apically and coronally with Cavit prior to apically and coronally with Cavit prior to sealing the entire external root surface with nail varnish. Specimens were placed in 2% methylene blue dye in a vacuum of 660 mm of mercury for five minutes and than left immersed for a further two days. The roots were vertically sectioned to determine the following mean levels of dye penetration: keta-Endo, 1.08 mm apically and 6.29 mm coronally; AH-26, 0.75 mm apically and 6.67 mm coronally. Positive controls had total leakage and negative controlls had no leakage. This study demonstrated that the apical and coronal seals obtained with Ketac-Endo and AH-26 were not significantly different although the apical seal obtained with each material was significantly better than the corresponding coronal seal.     

Delivery of Antibacterial Nanoparticles into Dentinal Tubules Using High-intensity Focused Ultrasound

IntroductionHigh-intensity focused ultrasound (HIFU) produces collapsing cavitation bubbles. This study aims to investigate the efficacy of collapsing cavitation bubbles to deliver antibacterial nanoparticles into dentinal tubules to improve root canal disinfection.MethodsIn stage 1, experiments were performed to characterize the efficacy of collapsing cavitation bubbles to deliver the miniature plaster beads into a tubular channel model. In stage 2, experiments were conducted on root-dentin blocks to test the efficacy of HIFU applied at 27 kHz for 2 minutes to deliver antibacterial nanoparticles into dentinal tubules. After the stage 2 experiment, the samples were sectioned and analyzed using field-emission scanning electron microscopy and energy dispersive X-ray analysis.ResultsThe stage 1 experiment showed that collapsing cavitation bubbles using HIFU delivered plaster beads along the entire length of the tubular channel. It was observed from the stage 2 experiments that the diffusion of fluids alone was not able to deliver antibacterial nanoparticles into dentinal tubules. The collapsing cavitation bubbles treatment using HIFU resulted in significant penetration up to 1,000 μm of antibacterial nanoparticles into the dentinal tubules. The statistical analysis showed a highly significant difference in the depth of penetration of antibacterial nanoparticles between the two groups (<0.005).ConclusionThe cavitation bubbles produced using HIFU can be used as a potential method to deliver antibacterial nanoparticles into the dentinal tubules to enhance root canal disinfection.     

Influence of Drying Protocol with Isopropyl Alcohol on the Bond Strength of Resin-based Sealers to the Root Dentin

Introduction

This study compared the bond strength, interfacial ultrastructure, and tag penetration of resin-based sealers applied to smear-free radicular dentin using 70% isopropyl alcohol as the active final rinse.

Methods

Eighty root canals were prepared and assigned to 2 groups (n = 40) according to the drying protocol: paper points or 70% isopropyl alcohol. Then, roots were divided into 4 subgroups (n = 10) with respect to the sealer and obturation material: AH Plus (Dentsply De Trey GmbH, Konstanz, Germany) and gutta-percha (AH/GP), Hybrid Root SEAL (Sun Medical, Tokyo, Japan) and gutta-percha (HR/GP), Epiphany SE (Pentron Clinical Technologies, Wallingford, CT) and gutta-percha (EP/GP), and Epiphany SE and Resilon (EP/RS). Roots were sectioned, and the push-out test was performed. Failure modes were examined under stereomicroscopy and sealer penetration into the dentinal tubules under scanning electron microscopy. Data were statistically analyzed by 2-way analysis of variance post hoc Tukey tests with a significant level of 5%.

Results

Overall, canals dried with isopropyl alcohol showed significantly higher bond strength values (2.11 ± 1.74 MPa) than with paper points (1.81 ± 1.73 MPa) (P < .05). The HR/GP group showed lower bond strength than the AH/GP group (P < .05) but higher than the EP/GP and EP/RS groups (P < .05). The most frequent type of failure was cohesive in the AH/GP and HR/GP groups and adhesive in the EP/GP and EP/RS groups. Scanning electron microscopic evaluation revealed better adaptation of the adhesive interface in the AH/GP and HR/GP groups in comparison with the EP/GP and EP/RS groups.

Conclusions

A final rinse with EDTA and 70% isopropyl alcohol improved the bond strength and penetration of the sealers into dentinal tubules of the root.     

Comparison of Sealer Penetration Using the EndoVac Irrigation System and Conventional Needle Root Canal Irrigation

Introduction

The aim of this study was to compare the effect of the EndoVac irrigation system (SybronEndo, Orange, CA) and conventional endodontic needle irrigation on sealer penetration into dentinal tubules.

Methods

Forty single-rooted, recently extracted human maxillary central incisors were randomly divided into 2 groups according to the irrigation technique used: conventional endodontic needle irrigation and EndoVac irrigation. All teeth were instrumented using the ProFile rotary system (Dentsply Maillefer, Ballaigues, Switzerland) and obturated with gutta-percha and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany) labeled with fluorescent dye. Transverse sections at 1, 3, and 5 mm from the root apex were examined using confocal laser scanning microscopy. The total percentage and maximum depth of sealer penetration were then measured.

Results

Mann-Whitney test results showed that EndoVac irrigation resulted in a significantly higher percentage of sealer penetration than conventional irrigation at both the 1- and 3-mm levels (P < .05). However, no difference was found at the 5-mm level. The 5-mm sections in each group showed a significantly higher percentage and maximum depth of sealer penetration than did the 1- and 3-mm sections (P < .05).

Conclusions

The EndoVac irrigation system significantly improved the sealer penetration at the 1- to 3-mm level over that of conventional endodontic needle irrigation.