Characterization of Water‐Dispersible n‐Type Poly(benzimidazobenzophenanthroline) Derivatives

Novel water dispersible poly(benzimidazobenzophenanthroline) polymers functionalized with poly(ethylene oxide) (BBL:PEO) have been investigated by cyclic voltammetry, in situ UV‐vis spectroscopy and atomic force microscopy. The cyclic voltammograms recorded during n‐doping indicate that the drop coated BBL:PEO films retain their properties despite functionalization. A small influence of the PEO side chains on redox properties of the investigated polymers was found, diminishing however after annealing. During spectroscopic experiments structural changes connected with polymer charging were observed (in accordance with a two electron transfer process). The functionalization of BBL with PEO side chains provided an easy processing method to obtain smooth and reproducible polymer films.

     

Synthesis of Telechelic Oligomers via Atom Transfer Radical Polymerization, 3

Summary: ATRP of butyl α‐fluoroacrylate (FABu) was carried out at 90 °C using methyl 2‐bromoisobutyrate (2‐MBiB) as initiator and the homogeneous catalyst CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA). Telechelic oligomers were obtained by coupling the bromo terminated polymers in the presence of Cu⁽⁰⁾ and 2,2′‐bipyridyl ligand. The ¹H and ¹⁹F NMR, SEC and MALDI TOF analyses show that the poly(FABu) chains recombination was the main reaction (80% yield). About 20% of disproportionation reaction also occurs in the process, whereas transfer reactions can be neglected.

Compounds produced by recombination, disproportionation and transfer during the coupling reaction of poly(FABu) oligomers.     

Synthesis and Characterization of Poly(glycolic acid‐alt‐6‐aminohexanoic acid) and Poly(glycolic acid‐alt‐11‐aminoundecanoic acid)

Summary: Poly(ester amide)s derived from glycolic acid and ω‐amino acid units, such as aminohexanoic or aminoundecanoic acids, are synthesized by a thermal polycondensation reaction that involves the formation of metal halide salts. Polymerization kinetics of different metal salts are studied by isothermal and nonisothermal methods and the corresponding parameters compared. The condensation reaction begins in the solid state for the aminohexanoic derivatives, although a rapid liquefaction is observed. On the other hand, the melting temperatures of the sodium and the potassium chloroacetylaminoundecanoate salts are lower than the reaction temperatures, and consequently polycondensation proceeds fully in the liquefied state. These polymers are characterized by an alternate disposition of ester and amide groups and can be obtained with high molecular weights and short polymerization times. Thermal properties (glass transition and melting temperatures) of the two new polymers are determined and compared. Thermal stability is also investigated; the results indicated that decomposition temperatures were always far from both reaction and polymer fusion temperatures.

DSC heating scans performed at different rates for potassium chloroacetylaminoundecanote.     

Solid‐State Olefin Metathesis: ADMET of Rigid‐Rod Polymers and Ring‐Closing Metathesis

Summary: Solid‐state olefin metathesis of rigid‐rod acyclic diene metathesis (ADMET) polymers and ring‐closing metathesis (RCM) have been investigated. 1,4‐Dipropoxy‐2,5‐divinylbenzene ( 4 ) was synthesized and used in a bulk ADMET polymerization to produce oligomers of dialkoxy poly(phenylene vinylene). The reaction was continued in the solid state, effectively doubling the molecular weight. Solid‐state RCM was investigated with a variety of solid dienes and metathesis catalysts, and demonstrated in low conversions using amide diene 5 with catalysts 9 , 13 , and 14 .

     

α,ωn‐Heterotelechelic Hyperbranched Polyethers Solubilize Carbon Nanotubes

The synthesis of novel linear‐hyperbranched (linhb) polyether block copolymers based on poly(ethylene oxide) and branched poly(glycerol), bearing a single pyrene or myristyl moiety at the α‐position of the linear chain is described. The polymers exhibit low polydispersity ( < 1.3) and controlled molecular weights ( = 5 000 g · mol^?1). The mainly hydrophilic block copolymers with multiple hydroxyl end groups readily dissolve multiwalled carbon nanotubes (MWCNTs) in water by mixing and subsequent sonification, resulting in noncovalent attachment of the linhb hybrid structure to the carbon nanotubes (CNTs). Transmission electron microscopy (TEM) was employed to visualize the solubilized nanotubes; after sulfation of the multiple hydroxyl groups the polymer layer was detected in the TEM images.

     

Light‐Tunable Thermosensitivity of Polymer‐Coated Gold Nanoparticles Achieved by Light‐Controlled Molecular Recognition

Thermo‐ and photosensitive gold nanoparticles (AuNPs) coated with an azobenzene‐contained P(DMA‐PAPA‐MAEL) copolymer are prepared by ligand exchange reactions. The photoisomerization of azobenzene moiety on the surface of P(DMA‐PAPA‐MAEL)‐coated AuNPs is detected by means of UV‐Vis spectroscopy with the presence or absence of free α‐cyclodextrin. When subjected to visible and UV light irradiation alternately, P(DMA‐PAPA‐MAEL)‐coated AuNPs in the presence of free α‐CD display a light‐tunable lower critical solution temperature through light‐controlled molecular recognition between the azobenzene moiety on the surface of AuNPs and free α‐CD.

     

Synthesis and characterization of poly(ethylene oxide) and poly(perfluorohexylethyl methacrylate) containing triblock copolymers

A new series of poly(perfluorohexylethyl methacrylate)‐block‐poly(ethylene oxide)‐block‐poly(perfluorohexylethyl methacrylate), PFMA‐b‐PEO‐b‐PFMA triblock copolymers has been synthesized by atom transfer radical polymerization using bifunctional PEO macroinitiators. The molecular structure of the block copolymers was confirmed by ¹H NMR spectroscopy and SEC. X‐ray scattering studies have been carried out to investigate their bulk properties. SAXS has shown cubic arrangement of spheres (bcc), hexagonally packed cylinders (hpc) and lamellar microdomain formation in the melt of triblock copolymers investigated, depending on composition. Crystallization was, however, found to destroy the ordered melt morphology and imposes a lamellar crystalline structure. WAXS, DSC and polarized light microscopy measurements confirmed the crystallization of PEO segments in block copolymers. Long PFMA blocks were found to have significant effect on PEO crystallization.

Synthesis of triblock copolymers of EO and FMA by ATRP.     

Synthesis,Self‐Assembly,and Properties of Homoarm and Heteroarm Star‐Shaped Inorganic–Organic Hybrid Polymers with a POSS Core

Novel homoarm and heteroarm star‐shaped inorganic–organic hybrid polymers with a polyhedral oligomeric silsesquioxane (POSS) core are prepared via click chemistry of azide POSS [POSS‐(N₃)₈], alkynyl poly(L ‐lactide) (PLLA), and alkynyl poly(ethylene oxide) (PEO). The melting and crystallization behaviors of the polymers can be adjusted by altering the PLLA to PEO ratio. The hybrid polymers reveal unique crystalline morphology due to the influence of the star‐shaped structure and the mutual influence of PLLA and PEO. The hybrid polymers show different thermostabilities, owing to the different compositions of the polymers. The hydrophilicity can be adjusted by alternating the composition of the PLLA and PEO segments. In addition, the sizes of the polymer micelles change with the change of the ratio of PLLA and PEO arms in the hybrid polymers.

     

Monolayer Assemblies of Comb Polymers Containing Different Kinds of Fluorocarbon Side‐Chains

Summary: Langmuir monolayers and organized molecular films of comb polymers containing different kinds of fluorocarbon side‐chains with various chain lengths and substituted atoms at the ω‐position were characterized by surface pressure‐area isotherms as well as Brewster angle microscopy on a water surface and by scanning probe microscopies (AFM and FFM) and the out‐of and in‐plane X‐ray diffractions on the solid substrates, respectively. When compared with monolayers of fluorinated amphiphilic vinyl monomers, those of the corresponding comb polymers were significantly stabilized. The nanostructures of these organized molecular films changed considerably with the film fabrication method used (such as mixed monolayers with hydrogenated amphiphiles) and the deposition conditions as well as with minor chemical modification of the fluorinated comb polymers with different hydrophilic esters and fluorocarbon side‐chains. The characteristic friction behavior for films built up of the fluorinated amphiphiles and comb polymers was found to depend strongly on the chemical constituents of the outermost layer of the film surface.

     

Synthesis and Optical Properties of π‐Conjugated Polymers Composed of Benzo[1,2‐b:4,5‐b′]dithiophene and Thiophenes Bearing Electron‐Deficient Ethenyl Groups in the Side Chains

π‐Conjugated polymers composed of dialkoxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophenes bearing cyano‐alkoxycarbonylethenyl [? CH?C(CO₂R)CN] and bis(alkoxycarbonyl)ethenyl groups [? CH?C(CO₂R)₂] were prepared. The optical properties of the obtained polymers were investigated by UV‐vis and photoluminescence spectroscopy to demonstrate that the absorption maxima of the polymers were tunable by varying the substituent of thiophene unit. The photoluminescence wavelengths and intensities of the polymer in solution were significantly dependent on the polymer side chain. The HOMO energy level of the polymer was lowered by up to ?5.51 eV by introducing electron‐deficient cyano groups. Polymer solar cells based on the new polymers were fabricated to achieve a PCE of 1.90%.

     

Architecturally and Chemically Modified Poly(1,3‐cyclohexadiene)

Star‐shaped, star‐block‐linear, and hyperbranched poly(1,3‐cyclohexadiene) (PCHD) (co)polymers were synthesized through a convergent living anionic polymerization process or via addition of divinylbenzene. Chemical modification of star‐shaped PCHDs, including aromatization, hydrogenation, fluorination, and sulfonation, was carried out in order to manipulate the physical and thermal properties of these materials. The obtained (co)polymers were characterized by gel permeation chromatography, ¹H NMR, DSC, and thermal gravimetric analysis in order to elucidate their molecular weights, molecular weight distributions, chemical nature, and physical and thermal properties. The synthetic approaches described herein offer routes to novel structure and functionality in PCHD‐based materials.

     

Chain Growth Polycondensation as a Polymer Generating Reaction in the Synthesis of Oligo(p‐phenyleneethynylene)s with Low Polydispersity

Summary: The polycondensation of 1‐ethynyl‐2,5‐dihexyl‐4‐iodobenzene in the presence of 1‐ethynyl‐2,5‐dihexyl‐4‐(2‐phenylethynyl)benzene proceeds according to the mechanism of initiated chain growth polycondensation. It has allowed the synthesis of oligomers with a desired molecular weight and a narrow molecular weight distribution. The reasons for the side reaction leading to the formation of diyne compounds are revealed and the presumed mechanism is given. This opens prospects for the preparation of defectless poly(p‐phenyleneethynylene)s with required molecular weights and narrow molecular weight distributions.

     

Synthesis of Laser‐Alignable Liquid Crystalline Conducting Polymers

Summary: The synthetic routes to three series of liquid crystal conducting polymers (based on pyrrole, thiophene, and aniline monomers) are reported and the optimum conditions for polymer preparation are described. These polymers show increased conductivity when laser‐aligned, the greatest effect being shown by the N‐substituted pyrrole‐based system. Information on their liquid crystal and spectroscopic properties and other characteristics are also included.

Structure of the monomers M1, M2, and M3.     

Pinacol rearrangement in the polymer backbone: Synthesis of novel reactive polymers with condensed benzopinacol units in the main chain and their complete rearrangement to poly(benzopinacolone)s

Novel reactive polymers with condensed benzopinacol moieties in the main chain were synthesized and their acid‐catalyzed pinacol rearrangement in the polymer backbone proceeded to afford poly(benzopinacolone)s quantitatively. Since the pinacol rearrangement shows an intramolecular mechanism, no crossover between the polymer chains was observed through the rearrangement. Although the number‐averaged molecular weights and their distributions were not changed, the optical and thermal properties of the poly(benzopinacolone)s were completely different from the parent poly(benzopinacolone)s.

     

Amorphous‐Crystalline PSnPEOn Heteroarm Star Copolymers: Crystallinity and Crystallization Kinetics

Summary: The crystallization behavior and kinetics of poly(ethylene oxide) in polystyrene/poly(ethylene oxide) heteroarm star copolymers were studied by differential scanning calorimetry and optical microscopy. A comparison between star and linear amorphous‐crystalline block copolymers showed that the macromolecular architecture is an important factor affecting crystallinity. The following points were observed: the equilibrium melting point is higher in the star copolymers, the crystallinity reduces as the number of arms increases, leading to smaller and ill‐defined spherulites, and crystallization proceeds faster in linear copolymers at low supercooling.

Half crystallization times, t_1/2, calculated from the Avrami analysis of the latent heats, obtained during the isothermal crystallization experiments as a function of supercooling, ΔT, for all copolymers.     

On the Mechanism of the Ring‐Expansion Polymerization of Thiiranes

Ring polymers are synthesized using a cyclic bifunctional thioester as initiator for REP of thiiranes. PMT yields satisfactory results, whereas polymerization with MT appears to develop dead polymeric material as by‐product and TBMT gives only negligible conversion rates. The process produces high yields and high conversion rates. The corresponding molecular weight distributions show increasing broadening and multimodal character with increasing reaction time due to thermodynamically controlled ring‐merging reactions between macrocycles. The polymerization rate of PMT obeys a pseudo first‐order kinetics with an activation energy of 38.8 kJ mol^?1. ¹H NMR, ESI‐MS, and glass transition temperatures independent of the molecular weight demonstrate the presence of cyclic polymer.

     

Synthesis of Defined Poly(silsesquioxane)s: Fast Polycondensation of Trialkoxysilanes in a Continuous‐Flow Microreactor

The polycondensation of trialkoxysilanes to PSSQs in a microreactor setup is demonstrated. While continuous‐flow processes involving microreactors found various applications in chain growth polymerization, their influence on step‐growth polymerization is less explored, and the polycondensation of multifunctional monomers has not been studied in detail. We found significantly increased yields and a decreased polydispersity of the obtained polymers in comparison to the batch process. By variation of the residence time molecular weights could be adjusted reproducibly ranging from = 1 900 to 11 000 g · mol^?1. Thus, the microreactor setup offers for the first time the possibility to synthesize PSSQ with adjustable properties.

     

Thermal Properties of Poly(ester amide)s with Isolated,Two Adjacent and Three Adjacent Amide Groups within a Polyester Chain

Differential scanning calorimetry (DSC) was employed to investigate the thermal properties of segmented aliphatic poly(ester amide)s (PEA)s. Three different series of PEAs were synthesized, each containing amide blocks of defined lengths which are randomly placed in the poly(butylene adipate) (PBA) backbone. Thus, the defined amide blocks consist of isolated amide groups, two adjacent amide groups or three adjacent amide groups. The PEAs show glass transition temperatures between ?63 and 1 °C, melting temperatures between 28 and 183 °C and crystallization temperatures lie between ?0.2 and 148 °C. The types of groups participating in the crystallization process and the length of the amide segments have an influence on the morphology of these polymers.

     

Selective Localization Behavior of Carbon Nanotubes: Effect on Transesterification of Immiscible Polyester Blends

The selective localization of carbon nanotubes (CNTs) in an immiscible polymer blend has attracted much attention. If the two component polymers could react with each other, do selectively located CNTs affect those reactions? Here, an immiscible polyester blend based on polycarbonate/poly(trimethylene terephthalate) (PC/PTT) is studied. CNTs introduced during melt mixing are selectively located in the PTT phase and on the phase interface during the middle stage of melt mixing. The interface‐located CNTs can act as additional substrate to catalyze or even participate in the transesterification themselves, homogenizing the phase morphology of the matrix blend. The degree of randomness of the composite systems is increased, accompanied by a reduced number‐average length of the copolymer sequences.