A fully automated synthesis of [18F]‐FEAU and [18F]‐FMAU using a novel dual reactor radiosynthesis module

2′‐Deoxy‐2′‐[¹⁸F]fluoro‐5‐substituted‐1‐β‐D ‐arabinofuranosyluracils, including 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D ‐arabinofuranosyluracil [¹⁸F]FMAU and [¹⁸F]FEAU are established radiolabeled probes to monitor cellular proliferation and herpes simplex virus type 1 thymidine kinase (HSV1‐tk) reporter gene expression with positron emission tomography. For clinical applications, a fully automated CGMP‐compliant radiosynthesis is necessary for production of these probes. However, due to multiple steps in the synthesis, no such automated synthetic protocols have been developed. We report here a fully automated synthesis of [¹⁸F]‐FEAU and [¹⁸F]‐FMAU on a prototype dual reactor module TRACERlab FX FN. The synthesis was performed by using a computer‐programmed standard operating procedure, and the product was purified on a semipreparative high‐performance liquid chromatography (HPLC) integrated with the synthesis module using 12% EtOH in 50 mM Na₂HPO₄. Finally, the percentage of alcohol was adjusted to 7% by adding Na₂HPO₄ and filtered through a Millipore filter to make dose for human. The radiochemical yield on the fluorination was 40±10% (n=10), and the overall yields were 4±1% (d. c.), from the end of the bombardment; [¹⁸F]FEAU (n=7) and [¹⁸F]FMAU (n=3). The radiochemical purity was >99%, specific activity was 1200–1300 mCi/µmol. The synthesis time was 2.5 h. This automated synthesis should be suitable for production of [¹⁸F]FIAU, [¹⁸F]FFAU, [¹⁸F]FCAU, [¹⁸F]FBAU and other 5‐substitued thymidine analogues. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of 3′‐deoxy‐3′‐[18F]fluoro‐1‐β‐D‐xylofuranosyluracil ([18F]‐FMXU) for PET

The synthesis of a pyrimidine analog, 3′‐deoxy‐3′‐[¹⁸F]‐fluoro‐1‐β‐D ‐xylofuranosyluracil ([¹⁸F]‐FMXU) is reported. 5‐Methyluridine 1 was converted to its di‐methoxytrityl derivatives 2 and 3 as a mixture. After separation the 2′,5′‐di‐methoxytrityluridine 2 was converted to its 3′‐triflate 4 followed by derivatization to the respective N³‐t‐Boc product 5 . The triflate 5 was reacted with tetrabutylammonium[¹⁸F]fluoride to produce 6 , which by acid hydrolysis yielded compound 7 . The crude preparation was purified by HPLC to obtain the desired product [¹⁸F]‐FMXU. The radiochemical yields were 25–40% decay corrected (d. c.) with an average of 33% in four runs. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 67–75 min from the end of bombardment (EOB). Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of [18F]‐labeled 2′‐deoxy‐2′‐fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([18F]‐FMAU)

Synthesis of 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D‐arabinofuranosyluracil ([¹⁸F]‐FMAU) is reported. 2‐Deoxy‐2‐[¹⁸F]fluoro‐1,3,5‐tri‐O‐benzoyl‐α‐D‐arabinofuranose 2 was prepared by the reaction of the respective triflate 1 with tetrabutylammonium[¹⁸F]fluoride. The fluorosugar 2 was converted to its 1‐bromo‐derivative 3 and coupled with protected thymine 4 . The crude product mixture ( 5a and 5b ) was hydrolyzed in base and purified by HPLC to obtain the radiolabeled FMAU 6a . The radiochemical yield of 6a was 20–30% decay corrected (d.c.) in four steps with an average of 25% in four runs. Radiochemical purity was >99% and average specific activity was 2300 mCi/μmol at the end of synthesis (EOS). The synthesis time was 3.5–4.0 h from the end of bombardment (EOB). Copyright © 2002 John Wiley & Sons, Ltd.     

19F/18F exchange synthesis for a novel [18F]S1P3‐radiopharmaceutical

¹⁹F/¹⁸F isotope exchange is a useful method to label drug molecules containing ¹⁹F‐fluorine with ¹⁸F without modifying the drug molecule itself. Sphingosine‐1‐phosphate (S1P) is an important cellular mediator that functions by signaling through cell surface receptors. S1P is involved in several cell responses and may be related to many central nervous system disorders, including neural malfunction in Alzheimer's disease. In this study, [¹⁸F]1‐benzyl‐N‐(3,4‐difluorobenzyl)‐2‐isopropyl‐6‐(2‐methoxyethoxy)‐1H‐indole‐3‐carboxamide, a novel ¹⁸F‐labeled positron emission tomography tracer for the S1P₃ receptor, was successfully synthesized using the ¹⁹F/¹⁸F isotope exchange reaction. Parameters of the reaction kinetics were studied, and correlations between the initial ¹⁸F‐activity, the amount of precursor, radiochemical yield and specific activity (SA) were determined. Contrary to expectations, high initial ¹⁸F‐activity decreased the radiochemical yield, and only a minor increase of SA occurred. This is most probably due to the complexity of the molecule and the subsequent susceptibility to radiolytic bond disruption. On the basis of the present results, a convenient condition for the ¹⁹F/¹⁸F exchange reaction is the use of 2 µmol precursor with 20 GBq of ¹⁸F‐activity. This afforded a radiochemical yield of ~10% with an SA of 0.3 GBq/µmol. Results from this study are of interest for new tracer development where high initial ¹⁸F‐activity and ¹⁹F/¹⁸F isotope exchange is used.     

A general synthesis of 2′‐deoxy‐2′‐[18F]fluoro‐1‐β‐D‐arabinofuranosyluracil and its 5‐substituted nucleosides

Several 2′‐deoxy‐2′‐[¹⁸F]fluoro‐1‐β‐D‐arabinofuranosyluracil derivatives have been synthesized. Coupling of 1‐bromo‐2‐deoxy‐2‐[¹⁸F]fluoro‐3,5‐di‐O‐benzoyl‐α‐D‐arabinofuranose 2 with protected uracil derivatives 3a–e followed by hydrolysis and high‐performance liquid chromatography purification produced the radiolabeled nucleosides 4a–e in 15–30% yield (d. c.), >99% radiochemical purity and 55.5–103.6 GBq/µmol specific activities. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiochemical synthesis of 2′‐[18F]‐labelled and 3′‐[18F]‐labelled nucleosides for positron emission tomography imaging

This review article considers 2′‐labelled and 3′‐labelled nucleosides, which are of great importance as positron emission tomography (PET) probes in clinical diagnostics and PET research. Although the radiochemical preparation of several [¹⁸F]‐labelled nucleosides such as [¹⁸F]fluorothymidine or [¹⁸F](fluoroarabinofuranosyl)cytosine has been accomplished within the last two decades, a number of potentially interesting nucleoside‐based biomarkers are not yet available for automated good manufacturing practice production due to the lack of fast and efficient synthetic methods for late‐stage [¹⁸F]‐introduction. In order to meet recent demands for new PET‐based biomarkers in various clinical applications, appropriate precursors that can easily be fluorinated and deprotected need to be developed.     

Temperature effects on the stereospecificity of nucleophilic fluorination: formation of trans‐[18F]4‐fluoro‐l‐proline during the synthesis of cis‐[18F]4‐fluoro‐l‐proline

Fluorine‐18 labeled (2S,4S)‐4‐fluoro‐l ‐proline (cis‐[¹⁸F]4‐FPro) has been reported to be a potential positron emission tomography tracer to study abnormal collagen synthesis occurring in pulmonary fibrosis, osteosarcomas, mammary and colon carcinomas. In this paper, we report the stereospecific radiofluorination of (2S,4R)‐N‐tert‐butoxycarbonyl‐4‐(p‐toluenesulfonyloxy) proline methyl ester (at 110°C) to produce diastereomerically pure cis‐[¹⁸F]4‐FPro in 38% radiochemical yield at the end of a 90‐min synthesis. Investigation of the effect of temperature on the stereospecificity of nucleophilic fluorination showed that diasteriomerically pure cis‐[¹⁸F]4‐FPro or trans‐[¹⁸F]4‐FPro was produced at lower temperatures (85°C–110°C) during the fluorination of (2S,4R) or (2S,4S) precursors, respectively. However, at higher temperatures (130°C–145°C), fluorination of (2S,4R) precursor produced a mixture of cis‐[¹⁸F]4‐FPro and trans‐[¹⁸F]4‐FPro diastereomers with cis‐[¹⁸F]4‐FPro as the predominant isomer. Hydrolysis of the purified fluorinated intermediate was carried out either in one step, using 2 m triflic acid at 145°C for 10 min, or in two steps where the intermediate was heated in 1 m HCl at 110°C for 10 min followed by stirring at room temperature in 1 N NaOH for 5 min. The aqueous hydrolysis mixture was loaded onto an anion exchange column (acetate form for one‐step hydrolysis) or an ion retardation column (two‐step hydrolysis) followed by a C₁₈ Sep‐Pak® (Waters Corporation, Milford, MA, USA). Pure cis‐[¹⁸F]4‐FPro was then eluted with sterile water. We also report that epimerization of cis‐[¹⁸F]4‐FPro occurs during the two‐step hydrolysis (H⁺ followed by OH^?) of the intermediate, resulting in 5 ± 3% trans‐[¹⁸F]4‐FPro, whereas the one‐step acid hydrolysis yielded pure cis‐[¹⁸F]4‐FPro in the final product. Copyright © 2011 John Wiley & Sons, Ltd.     

Trifluoromethanesulfonic acid,an alternative solvent medium for the direct electrophilic fluorination of DOPA: new syntheses of 6‐[18F]fluoro‐L‐DOPA and 6‐[18F]fluoro‐D‐DOPA

Previous work from this laboratory has shown that the direct fluorination of 3, 4‐dihydroxy‐phenyl‐L ‐alanine (L ‐DOPA) in anhydrous HF (aHF) or BF₃/HF with F₂ is an efficient method for the synthesis of 6‐fluoro‐L ‐DOPA. Since then, ¹⁸F‐labeled 6‐fluoro‐L ‐DOPA ([¹⁸F]6‐fluoro‐L ‐DOPA) has been used to study presynaptic dopaminergic function in the human brain and to monitor gastrointestinal carcinoid tumors. This work demonstrates that the reactivity and selectivity of F₂ toward L ‐DOPA in CF₃SO₃H is comparable with that in aHF. This new synthetic procedure has led to the production of [¹⁸F]fluoro‐L ‐DOPA and [¹⁸F]fluoro‐D‐DOPA isomers in 17±2% radiochemical yields (decay corrected with respect to [¹⁸F]F₂). The 2‐ and 6‐FDOPA isomers were separated by HPLC and subsequently characterized by ¹⁹F NMR spectroscopy. The corresponding [¹⁸F]‐FDOPA enantiomers have been obtained in clinically useful quantities by a synthetic approach that avoids the use of aHF. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of [18F]‐labeled adenosine analogues as potential PET imaging agents

The syntheses of adenosine analogues, 2′‐deoxy‐2′‐[¹⁸F]fluoro‐9‐β‐D ‐arabinofuranosyladenine ([¹⁸F]‐FAA) and 3′‐deoxy‐3′‐[¹⁸F]fluoro‐9‐β‐D ‐xylofuranosyladenine ([¹⁸F]‐FXA) are reported. Adenosine ( 1 ) was converted to its methoxytrityl derivatives 2 and 3 as a mixture. After separation, these derivatives were converted to their respective triflates 4 and 5 . Each triflate was reacted with tetrabutylammonium[¹⁸F]fluoride to produce 6b or 7b , which by acidic hydrolysis yielded compounds 8b and 9b . Crude preparations were purified by HPLC to obtain the desired pure products. The radiochemical yields were 10‐18% decay corrected (d. c.) for 8b and 30‐40% (d. c.) for 9b in 4 and 3 runs, respectively. Radiochemical purity was >99% and specific activity was >74 GBq/μmol at the end of synthesis (EOS). The synthesis time was 90‐95 min from the end of bombardment (EOB). Copyright © 2003 John Wiley & Sons, Ltd.     

Rapid and efficient synthesis of [18F]fluoronicotinamides, [18F]fluoroisonicotinamides and [18F]fluorobenzamides as potential pet radiopharmaceuticals for melanoma imaging

In an attempt to simplify nucleophilic radiofluorination reactions to be amenable for automation, a series of [¹⁸F]fluoronicotinamides, [¹⁸F]fluoroisonicotinamides and [¹⁸F]fluorobenzamides were synthesized using one‐step synthetic approach involving displacement reactions on trimethylammonium‐nicotinamide, trimethylammonium‐isonicotinamide and trimethylammonium‐benzamide precursors. Based on starting [¹⁸F]‐fluoride, radiochemical yields and purities were found to be greater than 90 and 97%, respectively, within 20 min synthesis time and, without high‐performance liquid chromatography purification. This synthetic approach holds great promise as a rapid and simple method for the automated radiofluorination of [¹⁸F]fluoronicotinamides, [¹⁸F]fluoroisonicotinamides and [¹⁸F]fluorobenzamides with high radiochemical yield and very short preparation time. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydroacylation of 4‐[18F]fluorobenzaldehyde: a novel method for the preparation of 4′‐[18F]phenylketones

To assess the potential of intermolecular hydroacylation reactions as a new fluorine‐18 labeling method, model reactions of [¹⁸F]fluorobenzaldehyde with three different olefins (1‐hexene ( 2a ), allylbenzene ( 2b ), and 3‐phenoxypropene ( 2c )) in the presence of Wilkinson's catalyst were performed. The procedure gave high radiochemical yields (38–62%) of [¹⁸F]fluorophenylketones with short reaction times (15 min). The intermolecular hydroacylation reaction provides a new method for the preparation of fluorine‐18 labeled compounds. Copyright © 2002 John Wiley & Sons, Ltd.     

Novel synthesis of [18F]‐fluorobenzene and pyridinecarbohydrazide‐folates as potential PET radiopharmaceuticals

In an attempt to visualize folate receptors that over‐express on many cancers, [¹⁸F]‐fluorobenzene and pyridine carbohydrazide‐folates were synthesized using two different synthetic approaches starting from nucleophilic displacement reactions on ethyl‐trimethylammonium‐benzoate and pyridine carboxylate precursors. The intermediates ethyl [¹⁸F]‐fluorinated benzene and pyridine esters were reacted with hydrazine to produce the [¹⁸F]‐fluorobenzene and pyridine carbohydrazides followed by coupling with NHS‐folate 11 in the first approach. Whereas hydrazide‐folate 5 was reacted with 2,5‐dioxoazolidinyl [¹⁸F]‐fluorobenzenecarboxylate in the second approach. Based on starting [¹⁸F]‐fluoride, radiochemical yields and synthesis times were found to be around 80% (45 min) and 35% (80 min) for the first and the second approaches, respectively. The first synthetic approach holds considerable promise as a rapid and simple method for the radiofluorination of folic acid with high radiochemical yield and short time. Copyright © 2005 John Wiley & Sons, Ltd.     

Preparation of 3′‐deoxy‐3′‐[18F]fluorothymidine ([18F]FLT) in ionic liquid, [bmim][OTf]

Although 3′‐deoxy‐3′‐[¹⁸F]fluorothymidine ([¹⁸F]FLT) is a prospective radiopharmaceutical for the imaging of proliferating tumor cell, it is difficult to prepare large amount of [¹⁸F]FLT. We herein describe the preparation of [¹⁸F]FLT in an ionic liquid, [bmim][OTf] (1‐butyl‐3‐methyl‐imidazolium trifluoromethanesulfonate). At optimized condition, [¹⁸F]fluorinationin ionic liquid with 5 µl of 1 M KHCO₃ and 5 mg of the precursor yielded 61.5 ± 4.3% (n=10). Total elapsed time was about 70 min including HPLC purification. The rapid synthesis of [¹⁸F]FLT can be achieved by removing all evaporation steps. Overall radiochemical yield and radiochemical purity were 30 ± 5% and >95%, respectively. This method can use a small amount of a nitrobenzenesulfonate precursor and can be adapted for automated production. Copyright © 2006 John Wiley & Sons, Ltd.     

Copper‐mediated reduction of 2‐[18F]fluoroethyl azide to 2‐[18F]fluoroethylamine

¹⁸F‐labelled fluoroalkylamines are attractive reagents for the preparation of positron emission tomography tracers containing amine, amide, and N‐heterocyclic moieties. Herein, we report that 2‐[¹⁸F]fluoroethylamine can be obtained from 2‐[¹⁸F]fluoroethyl azide by reduction with elemental copper under acidic conditions. Azide to amine reduction was achieved in near quantitative analytical yields within 30 min by heating a solution of 2‐[¹⁸F]fluoroethyl azide in the presence of copper wire and aqueous trifluoroacetic acid. Subsequent reaction of 2‐[¹⁸F]fluoroethylamine with benzoyl chloride in the presence of triethylamine provided N‐[¹⁸F]fluoroethyl benzamide in 63% decay‐corrected radiochemical yield from 2‐[¹⁸F]fluoroethyl azide. The utility of the Cu(0)/H⁺ azide reduction method was further exemplified by preparation of the potential GABA_A tracer 9H‐β‐carboline N‐2‐[¹⁸F]fluoroethylamide, which was obtained in 46% decay‐corrected radiochemical yield by reaction of 2‐[¹⁸F]fluoroethylamine with the corresponding 9H‐β‐carboline pentafluorophenyl ester. Copyright © 2012 John Wiley & Sons, Ltd.     

One‐step synthesis of 4‐[18F]fluorobenzyltriphenylphosphonium cation for imaging with positron emission tomography

4‐[¹⁸F]Fluorobenzyltriphenylphosphonium cation (¹⁸F‐FBnTP) is a promising negative membrane potential targeting positron emission tomography tracer. However, the reported multistep radiolabeling approach for the synthesis of ¹⁸F‐FBnTP poses a challenge for routine clinical applications. In this study, we demonstrated that ¹⁸F‐FBnTP can be prepared in good conversion yields (~60%, nondecay corrected) in just one step via a copper‐mediated ¹⁸F‐fluorination reaction using a pinacolyl arylboronate precursor. In addition, our data suggest that ¹⁸F‐labeled (phosphonium) cations can be efficiently prepared via a copper‐mediated ¹⁸F‐fluoronation by using triflate as the counterion.     

Synthesis of [18F]‐labeled N‐3(substituted) thymidine analogues: N‐3([18F]fluorobutyl) thymidine ([18F]‐FBT) and N‐3([18F]fluoropentyl) thymidine ([18F]‐FPT) for PET

Syntheses of N‐3(substituted) analogues of thymidine, N‐3([¹⁸F]fluorobutyl)thymidine ([¹⁸F]‐FBT) and N‐3([¹⁸F]fluoropentyl)thymidine ([¹⁸F]‐FPT) are reported. 1,4‐Butane diol and 1,5 pentane diol were converted to their tosyl derivatives 2 and 3 followed by conversion to benzoate esters 4 and 5, respectively. Protected thymidine 1 was coupled separately with 4 and 5 to produce 6 and 7 , which were hydrolyzed to 8 and 9 , then converted to their mesylates 10 and 11 , respectively. Compounds 10 and 11 were fluorinated with n‐Bu₄N[¹⁸F] to produce 12 and 13 , which by acid hydrolysis yielded 14 and 15 , respectively. The crude products were purified by HPLC to obtain [¹⁸F]‐FBT and [¹⁸F]‐FPT. The radiochemical yields were 58–65% decay corrected (d.c.) for 14 and 46–57% (d.c.) for 15 with an average of 56% in three runs per compound. Radiochemical purity was >99% and specific activity was >74 GBq/µmol at the end of synthesis (EOS). The synthesis time was 65–75 min from the end of bombardment (EOB). Copyright © 2006 John Wiley & Sons, Ltd.     

The first enzymatic method for C–18F bond formation: the synthesis of 5′‐[18F]‐fluoro‐5′‐deoxyadenosine for imaging with PET

The use of the key enzyme involved in carbon–fluorine bond formation in Streptomyces cattleya catalysing the formation of 5′‐fluoro‐5′‐deoxyadenosine (5′‐FDA) from fluoride ion and S‐adenosyl‐l‐methionine (SAM) was explored for its potential application in fluorine‐18 labelling of the adenosine derivative. Enzymatic radiolabelling of [¹⁸F]‐5′‐FDA was successfully carried out starting from SAM and [¹⁸F]HF when the concentration of the enzyme preparation was increased from sub‐mg/ml values to mg/ml values. The purity of the enzyme had no measurable effect on the radiochemical yield of the reaction and the radiochemical purity of [¹⁸F]‐5′‐FDA. Copyright © 2003 John Wiley & Sons, Ltd.     

Radiosynthesis of 3‐(2′‐[18F]fluoro)‐flumazenil ([18F]FFMZ)

Recently, two fluorine‐18 labelled derivatives of flumazenil were described: 5‐(2′‐[¹⁸F]fluoroethyl)‐5‐desmethylflumazenil (ethyl 8‐fluoro‐5‐[¹⁸F]fluoroethyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylate; [¹⁸F]FEFMZ) and 3‐(2′‐[¹⁸F]fluoro)‐flumazenil (2′‐[¹⁸F]fluoroethyl 8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a]‐[1,4]diazepine‐3‐carbo‐ xylate; [¹⁸F]FFMZ). Since the biodistribution data of the latter were superior to those of the former we developed a synthetic approach for [¹⁸F]FFMZ starting from a commercially available precursor, thereby obviating the need to prepare a precursor by ourselves. The following two‐step procedure was developed: First, [¹⁸F]fluoride was reacted with 2‐bromoethyl triflate using the kryptofix/acetonitrile method to yield 2‐bromo‐[¹⁸F]fluoroethane ([¹⁸F]BFE). In the second step, distilled [¹⁸F]BFE was reacted with the tetrabutylammonium salt of 3‐desethylflumazenil (8‐fluoro‐5‐methyl‐6‐oxo‐5,6‐dihydro‐4H‐benzo‐[f]imidazo[1,5‐a] [1,4]diazepine‐3‐carboxylic acid) to yield [¹⁸F]FFMZ. The synthesis of [¹⁸F]FFMZ allows for the production of up to 7 GBq of this PET‐tracer, enough to serve several patients. [¹⁸F]FFMZ synthesis was completed in less than 80 min and the radiochemical purity exceeded 98%. Copyright © 2003 John Wiley & Sons, Ltd.     

Utility of azetidinium methanesulfonates for radiosynthesis of 3‐[18F]fluoropropyl amines

3‐Methanesulfonyloxypropyl tertiary amines were observed to cyclize to form azetidinium methanesulfonate moieties. Heat‐induced cyclization of 3‐methanesulfonyloxypropyl amines was utilized for preparation of azetidinium methanesulfonates. The azetidinium methanesulfonates were found to incorporate radioactive [¹⁸F]fluoride (decay‐corrected yields >60%) efficiently, resulting in an efficient synthesis of 3‐[¹⁸F]fluoropropyl tertiary amines. Copyright © 2004 John Wiley & Sons, Ltd.