Efficient synthesis of [18F]FPyME: A new approach for the preparation of maleimide‐containing prosthetic groups for the conjugation with thiols

An improved high yielding radiosynthesis of the known thiol‐reactive maleimide‐containing prosthetic group1‐[3‐(2‐[¹⁸F]fluoropyridine‐3‐yloxy)propyl]pyrrole‐2,5‐dione ([¹⁸F]FPyME) is described. The target compound was obtained by a two‐step one‐pot procedure starting from a maleimide‐containing nitro‐precursor that was protected as a Diels‐Alder adduct with 2,5‐dimethylfurane. Nucleophilic radiofluorination followed by heat induced deprotection through a Retro Diels Alder reaction yielded, after chromatographic isolation, [¹⁸F]FPyME with a radiochemical yield of 20% in about 60 min overall synthesis time. A variety of other [¹⁸F]fluoropyridine based maleimide‐containing prosthetic groups should be accessible via the described synthetic strategy.     

Baeyer‐Villiger oxidation tuned to chemoselective conversion of non‐activated [18F]fluorobenzaldehydes to [18F]fluorophenols

A reaction pathway via oxidation of [¹⁸F]fluorobenzaldehydes offers a very useful tool for the no‐carrier‐added radiosynthesis of [¹⁸F]fluorophenols, a structural motive of several potential radiopharmaceuticals. A considerably improved chemoselectivity of the Baeyer‐Villiger oxidation (BVO) towards phenols was achieved, employing 2,2,2‐trifluoroethanol as reaction solvent in combination with Oxone or m‐CPBA as oxidation agent. The studies showed the necessity of H₂SO₄ addition, which appears to have a dual effect, acting as catalyst and desiccant. For example, 2‐[¹⁸F]fluorophenol was obtained with a RCY of 97% under optimised conditions of 80°C and 30‐minute reaction time. The changed performance of the BVO, which is in agreement with known reaction mechanisms via Criegee intermediates, provided the best results with regard to radiochemical yield (RCY) and chemoselectivity, i.e. formation of [¹⁸F]fluorophenols rather than [¹⁸F]fluorobenzoic acids. Thus, after a long history of the BVO, the new modification now allows an almost specific formation of phenols, even from electron‐deficient benzaldehydes. Further, the applicability of the tuned, chemoselective BVO to the n.c.a. level and to more complex compounds was demonstrated for the products n.c.a. 4‐[¹⁸F]fluorophenol (RCY 95%; relating to 4‐[¹⁸F]fluorobenzaldehyde) and 4‐[¹⁸F]fluoro‐m‐tyramine (RCY 32%; relating to [¹⁸F]fluoride), respectively.     

Automated synthesis and purification of [18F]fluoro‐[di‐deutero]methyl tosylate

Automated synthetic procedures of [¹⁸F]fluoro‐[di‐deutero]methyl tosylate on a GE TRACERlab FX F‐N module and a non‐commercial synthesis module have been developed. The syntheses included azeotropic drying of the [¹⁸F]fluoride, nucleophilic ¹⁸F‐fluorination of bis(tosyloxy)‐[di‐deutero]methane, HPLC purification and subsequent formulation of the synthesized [¹⁸F]fluoro‐[di‐deutero]methyl tosylate (d₂‐[¹⁸F]FMT) in organic solvents. Automation shortened the total synthesis time to 50 min, resulting in an average radiochemical yield of about 50% and high radiochemical purity (>98%). The possible application of this procedure to commercially available synthesis modules might be of significance for the production of deuterated ¹⁸F‐fluoromethylated imaging probes in the future. Copyright © 2013 John Wiley & Sons, Ltd.     

How to increase the reactivity of [18F]fluoroethyl bromide: [18F]fluoroethylation of amine,phenol and amide functional groups with [18F]FEtBr, [18F]FEtBr/NaI and [18F]FEtOTf

[¹⁸F]Fluoroethyl bromide ([¹⁸F]FEtBr) is a useful synthetic precursor to synthesize ¹⁸F‐labeled compounds. However, the lower reactivity of [¹⁸F]FEtBr with amine, phenol and amide functional groups than that of [¹¹C]CH₃I partly limits its wide application in the synthesis of [¹⁸F]fluoroethylated compounds. The aim of this study was to increase the reactivity of [¹⁸F]FEtBr with various nucleophilic substrates for PET tracers containing amine, phenol and amide moieties. The present strategies included (1) adding NaI into the reaction mixture of [¹⁸F]FEtBr and substrate, where [¹⁸F]FEtI is reversibly formed and becomes more reactive; (2) converting [¹⁸F]FEtBr into much more reactive [¹⁸F]FEtOTf, similar to conversion of [¹¹C]CH₃I into [¹¹C]CH₃OTf. By these efforts, the [¹⁸F]fluoroethylation efficiency of various substrates containing amine, phenol and amide groups with [¹⁸F]FEtBr/NaI and [¹⁸F]FEtOTf was significantly improved, compared with the corresponding reaction efficiency with [¹⁸F]FEtBr. Copyright © 2003 John Wiley & Sons, Ltd.     

Fine‐tuning of the automated [18F]PSMA‐1007 radiosynthesis

Radiolabeled prostate‐specific membrane antigen (PSMA) targeting PET‐tracers have become desirable radiopharmaceuticals for the imaging of prostate cancer (PC). Recently, the PET radiotracer [¹⁸F]PSMA‐1007 was introduced as an alternative to [⁶⁸Ga]Ga‐PSMA‐11, for staging and diagnosing biochemically recurrent PC. We incorporated a one‐step procedure for [¹⁸F]PSMA‐1007 radiosynthesis, using both Synthra RNplus and GE TRACERlab FxFN automated modules, in accordance with the recently described radiolabeling procedure. Although the adapted [¹⁸F]PSMA‐1007 synthesis resulted in repeatable radiochemical yields (55 ± 5%, NDC), suboptimal radiochemical purities of 87 ± 8% were obtained using both modules. As described here, modifications made to the radiolabeling and the solid‐phase extraction purification steps reduced synthesis time to 32 minutes and improved radiochemical purity to 96.10%, using both modules, without shearing the radiochemical yield.     

Vacuum ultraviolet photon–mediated production of [18F]F2

The chemistry of F₂ and its derivatives are amenable to facile aliphatic or aromatic substitution, as well as electrophilic addition. The main limitation in the use of [¹⁸F]F₂ for radiopharmaceutical synthesis is the low specific activity achieved by the traditional methods of production. The highest specific activities, 55 GBq/μmol, for [¹⁸F]F₂ have been achieved so far by using electrical discharge in the post‐target production of [¹⁸F]F₂ gas from [¹⁸F]CH₃F. We demonstrate that [¹⁸F]F₂ is produced by illuminating a gas mixture of neon/F₂/[¹⁸F]CH₃F with vacuum ultraviolet photons generated by an excimer laser. We tested several illumination chambers and production conditions. The effects of the initial amount of [¹⁸F]F^‐, amount of carrier F₂, and number of 193‐nm laser pulses at constant power were evaluated regarding radiochemical yield and specific activity. The specific activity attained for [¹⁸F]F₂‐derived [¹⁸F]NFSi was 10.3 ± 0.9 GBq/μmol, and the average radiochemical yield over a wide range of conditions was 6.7% from [¹⁸F]F^‐. The production can be improved by optimization of the synthesis device and procedures. The use of a commercially available excimer laser and the simplicity of the process can make this method relatively easy for adaptation in radiochemistry laboratories.     

Simplified synthesis of N‐(3‐[18F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([18F]β‐CFT‐FP) using [18F]fluoropropyl tosylate as the labelling reagent

A synthesis method has been developed for the labelling of N‐(3‐[¹⁸F]fluoropropyl)‐2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane ([¹⁸F]β‐CFT‐FP), a potential radioligand for visualization of the dopamine transporters by positron emission tomography. The two‐step synthesis includes preparation of [¹⁸F]fluoropropyl tosylate and its use without purification in the fluoroalkylation of 2β‐carbomethoxy‐3β‐(4‐fluorophenyl)nortropane (nor‐β‐CFT). The final product is purified by HPLC. Optimization of the two synthesis steps resulted in a greater than 30% radiochemical yield of [¹⁸F]β‐CFT‐FP (decay corrected to end of bombardment). The synthesis time including HPLC‐purification was approximately 90 min. The radiochemical purity of the final product was higher than 99% and the specific radioactivity at the end of synthesis was typically 20 GBq/µmol. In comparison to alkylation by [¹⁸F]fluoropropyl bromide, the procedure described here results in an improved overall radiochemical yield of [¹⁸F]β‐CFT‐FP in a shorter time. Copyright © 2005 John Wiley & Sons, Ltd.     

Microfluidic radiosynthesis and biodistribution of [18F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid

Microfluidics technology has emerged as a powerful tool for the radiosynthesis of positron emission tomography (PET) and single‐photon emission computed tomography radiolabeled compounds. In this work, we have exploited a continuous flow microfluidic system (Advion, Inc., USA) for the [¹⁸F]‐fluorine radiolabeling of the malonic acid derivative, [¹⁸F] 2‐(5‐fluoro‐pentyl)‐2‐methyl malonic acid ([¹⁸F]‐FPMA), also known as [¹⁸F]‐ML‐10, a radiotracer proposed as a potential apoptosis PET imaging agent. The radiosynthesis was developed using a new tosylated precursor. Radiofluorination was initially optimized by manual synthesis and served as a basis to optimize reaction parameters for the microfluidic radiosynthesis. Under optimized conditions, radio‐thin‐layer chromatography analysis showed 79% [¹⁸F]‐fluorine incorporation prior to hydrolysis and purification. Following hydrolysis, the [¹⁸F]‐FPMA was purified by C18 Sep‐Pak, and the final product was analyzed by radio‐HPLC (high‐performance liquid chromatography). This resulted in a decay‐corrected 60% radiochemical yield and ≥98% radiochemical purity. Biodistribution data demonstrated rapid blood clearance with less than 2% of intact [¹⁸F]‐FPMA radioactivity remaining in the circulation 60 min post‐injection. Most organs showed low accumulation of the radiotracer, and radioactivity was predominately cleared through kidneys (95% in 1 h). Radio‐HPLC analysis of plasma and urine samples showed a stable radiotracer at least up to 60 min post‐injection.     

Automated synthesis of 18F‐labelled analogs of metomidate,vorozole and harmine using commercial platform

Three ¹⁸F‐labelled PET tracers, 2‐[¹⁸F]fluoroethyl 1‐[(1R)‐1‐phenylethyl]‐1H‐imidazole‐5‐carboxylate ([¹⁸F]FETO), 6‐[(S)‐(4‐chlorophenyl)‐(1H)‐1,2,4‐triazol‐1‐yl)methyl]‐1‐(2‐[¹⁸F]fluoroethyl)‐1H‐benzotriazole ([¹⁸F]FVOZ) and 7‐[2‐(2‐[¹⁸F]fluoroethoxy)ethoxy]‐1‐9H‐ β ‐carboline ([¹⁸F]FHAR) were synthesized by a one‐step nucleophilic fluorination using the automated commercial platform TRACERLab FX_FN. The labelled products were obtained with 16–20% isolated decay corrected radiochemical yields after 70–75 min synthesis time. The radiochemical and chemical purities were more than 98% in all cases. The synthesis using commercial platform may make these tracers more accessible for clinical research. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of novel PET probes, [18F]BCPP‐EF, [18F]BCPP‐BF,and [11C]BCPP‐EM for mitochondrial complex 1 imaging in the living brain

We developed three novel positron‐emission tomography (PET) probes, 2‐tert‐butyl‐4‐chloro‐5‐{6‐[2‐(2[¹⁸F]fluoroethoxy)‐ethoxy]‐pyridin‐3‐ylmethoxy}‐2H‐pyridazin‐3‐one ([¹⁸F]BCPP‐EF), 2‐tert‐butyl‐4‐chloro‐5‐[6‐(4‐[¹⁸F]fluorobutoxy)‐pyridin‐3‐ylmethoxy]‐2H‐pyridazin‐3‐one ([¹⁸F]BCPP‐BF), and 2‐tert‐butyl‐4‐chloro‐5‐{6‐[2‐(2‐[¹¹C]methoxy‐ethoxy)‐ethoxy]‐pyridin‐3‐ylmethoxy}‐2H‐pyridazin‐3‐one ([¹¹C]BCPP‐EM), for quantitative imaging of mitochondrial complex 1 (MC‐1) activity in vivo. These three PET probes were successfully labeled by nucleophilic [¹⁸F]fluorination or by [¹¹C]methylation of their corresponding precursor with sufficient radioactivity yield, good radiochemical purity, and sufficiently high specific radioactivity for PET measurement. The specificity of these probes for binding to MC‐1 was assessed with rotenone, a specific MC‐1 inhibitor, by a rat brain slice imaging method in vitro. Rat whole‐body imaging by small‐animal PET demonstrated that all probes showed high uptake levels in the brain as well as in the heart sufficient to image them clearly. The rank order of uptake levels in the brain and the heart just after injection was as follows: high in [¹⁸F]BCPP‐BF, intermediate in [¹¹C]BCPP‐EM, and low in [¹⁸F]BCPP‐EF. The kinetics of [¹⁸F]BCPP‐EF and [¹¹C]BCPP‐EM provided a reversible binding pattern, whereas [¹⁸F]BCPP‐BF showed nonreversible accumulation‐type kinetics in the brain and heart. Metabolite analyses indicated that these three compounds were rapidly metabolized in the plasma but relatively stable in the rat brain up to 60 min post‐injection. The present study demonstrated that [¹⁸F]BCPP‐EF could be a useful PET probe for quantitative imaging of MC‐1 activity in the living brain by PET.     

Synthesis,radiofluorination, and preliminary evaluation of the potential 5‐HT2A receptor agonists [18F]Cimbi‐92 and [18F]Cimbi‐150

An agonist PET tracer is of key interest for the imaging of the 5‐HT_2A receptor, as exemplified by the previously reported success of [¹¹C]Cimbi‐36. Fluorine‐18 holds several advantages over carbon‐11, making it the radionuclide of choice for clinical purposes. In this respect, an ¹⁸F‐labelled agonist 5‐HT_2A receptor (5‐HT_2AR) tracer is highly sought after. Herein, we report a 2‐step, 1‐pot labelling methodology of 2 tracer candidates. Both ligands display high in vitro affinities for the 5‐HT_2AR. The compounds were synthesised from easily accessible labelling precursors, and radiolabelled in acceptable radiochemical yields, sufficient for in vivo studies in domestic pigs. PET images partially conformed to the expected brain distribution of the 5‐HT_2AR; a notable exception however being significant uptake in the striatum and thalamus. Additionally, a within‐scan displacement challenge with a 5‐HT_2AR antagonist was unsuccessful, indicating that the tracers cannot be considered optimal for neuroimaging of the 5‐HT_2AR.     

Rapid and efficient synthesis of [18F]fluoronicotinamides, [18F]fluoroisonicotinamides and [18F]fluorobenzamides as potential pet radiopharmaceuticals for melanoma imaging

In an attempt to simplify nucleophilic radiofluorination reactions to be amenable for automation, a series of [¹⁸F]fluoronicotinamides, [¹⁸F]fluoroisonicotinamides and [¹⁸F]fluorobenzamides were synthesized using one‐step synthetic approach involving displacement reactions on trimethylammonium‐nicotinamide, trimethylammonium‐isonicotinamide and trimethylammonium‐benzamide precursors. Based on starting [¹⁸F]‐fluoride, radiochemical yields and purities were found to be greater than 90 and 97%, respectively, within 20 min synthesis time and, without high‐performance liquid chromatography purification. This synthetic approach holds great promise as a rapid and simple method for the automated radiofluorination of [¹⁸F]fluoronicotinamides, [¹⁸F]fluoroisonicotinamides and [¹⁸F]fluorobenzamides with high radiochemical yield and very short preparation time. Copyright © 2011 John Wiley & Sons, Ltd.     

4‐[18F]fluorophenyl ureas via carbamate‐4‐nitrophenyl esters and 4‐[18F]fluoroaniline

Four different no carrier added (n.c.a.) 4‐[¹⁸F]fluorophenylurea derivatives are synthesized as model compounds via two alternative routes. In both cases carbamate‐4‐nitrophenylesters are used as intermediates. Either n.c.a. 4‐[¹⁸F]fluoroaniline reacts with carbamates of several amines, or the carbamate of n.c.a. 4‐[¹⁸F]fluoroaniline is formed at first and an amine is added subsequently to yield the urea derivative. The choice of the appropriate way of reaction depends on the possibilities of precursor synthesis. The radiochemical yields reach up to 80% after 50 min of synthesis time while no radiochemical by‐products can be determined. These high yields were possible due to an optimized preparation of n.c.a. 4‐[¹⁸F]fluoroaniline with a radiochemical yield of up to 90%. From the various ways of its radiosynthesis, the substitution with n.c.a. [¹⁸F]fluoride on dinitrobenzene is chosen, using phosphorous acid and palladium black for reduction of the second nitro group. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of [18F]Fluoroclofilium as a potential cardiac imaging agent for PET studies

N‐4‐(4‐chlorophenyl)butyl‐N,N‐diethyl‐7‐[¹⁸F]fluoroheptylammonium ([¹⁸F]‐fluoroclofilium) has been prepared as a potential cardiac imaging agent. For the synthesis of this radiolabelled ammonium salt, its tosyloxylated analogue was prepared as a precursor, and the non‐radioactive fluorine analogue was synthesized as a reference compound. Radiofluorination was achieved by the treatment of N‐4‐(4‐chlorophenyl)butyl‐N,N‐diethyl‐7‐(p‐toluenesulfonyloxy)heptylammonium p‐toluenesulfonate with ¹⁸F^? in the presence of Kryptofix‐2.2.2 in acetonitrile. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis,labelling and first evaluation of [18F]R91150 as a serotonin 5‐HT2A receptor antagonist for PET

In psychiatric disorders such as anxiety, depression and schizophrenia, 5‐HT_2A receptors play an important role. In order to investigate them in vivo there is an increasing interest in selective and high‐affinity radioligands for receptor binding studies using positron emission tomography (PET). Since available radioligands have disadvantages, R91150, which is a selective and high‐affinity ligand for 5‐HT_2A receptors, was labelled with fluorine‐18. This was accomplished in six steps via 4‐[¹⁸F]fluorophenol and 1‐(3‐bromopropoxy)‐4‐[¹⁸F]fluorobenzene within 190 min starting from no‐carrier‐added [¹⁸F]fluoride. The overall radiochemical yield was 3.8±2% and the specific activity was at least 335 GBq/µmol at the end of the synthesis. First ex vivo studies in mice proved the uptake of [¹⁸F]R91150 in the brain. Radiometabolite studies revealed no radiometabolites in the brain, whereas in the plasma at least two could be detected 30 min p.i. Further preclinical studies are encouraged to evaluate the potential of this new 5‐HT_2A ligand as a radiotracer for PET. Copyright © 2008 John Wiley & Sons, Ltd.     

Improved synthesis of [18F]fluoromethyl tosylate,a convenient reagent for radiofluoromethylations

The utility of [¹⁸F]fluoromethyl tosylate as an [¹⁸F]fluoromethylation reagent has been reexamined. The preparation of this potentially useful compound from the reaction of bis(tosyloxy) methane with ¹⁸F‐ was reported several years ago, but it had not found use as a labeling reagent. When the reported reaction of bis(tosyloxy) methane with ¹⁸F‐ was carried out, [¹⁸F]fluoromethyl tosylate was formed along with [¹⁸F]tosyl fluoride. The product ratio depended upon reaction conditions, with the yield of [¹⁸F]fluoromethyl tosylate usually in the range of 25–40%. Addition of a small amount of water to the reaction mixture resulted in a significant increase in the yield of [¹⁸F]fluoromethyl tosylate. Reaction conditions were defined that produced a yield of 71±6% of [¹⁸F]fluoromethyl tosylate (decay corrected). The product was conveniently purified by alumina chromatography. Reaction of [¹⁸F]fluoromethyl tosylate with the (des‐fluoromethyl) fluticasone propionate thioacid precursor produced [¹⁸F]fluticasone propionate in improved yield (16%, from fluoride in production‐scale runs) over other synthesis methods. Similarly, formation of [¹⁸F]choline, [¹⁸F]fluoromethionine and N‐([¹⁸F]fluoromethyl)spiperone from the reaction of [¹⁸F]fluoromethyl tosylate with corresponding precursors was examined. Copyright © 2005 John Wiley & Sons, Ltd.     

A fully automated synthesis of [18F]‐FEAU and [18F]‐FMAU using a novel dual reactor radiosynthesis module

2′‐Deoxy‐2′‐[¹⁸F]fluoro‐5‐substituted‐1‐β‐D ‐arabinofuranosyluracils, including 2′‐deoxy‐2′‐[¹⁸F]fluoro‐5‐methyl‐1‐β‐D ‐arabinofuranosyluracil [¹⁸F]FMAU and [¹⁸F]FEAU are established radiolabeled probes to monitor cellular proliferation and herpes simplex virus type 1 thymidine kinase (HSV1‐tk) reporter gene expression with positron emission tomography. For clinical applications, a fully automated CGMP‐compliant radiosynthesis is necessary for production of these probes. However, due to multiple steps in the synthesis, no such automated synthetic protocols have been developed. We report here a fully automated synthesis of [¹⁸F]‐FEAU and [¹⁸F]‐FMAU on a prototype dual reactor module TRACERlab FX FN. The synthesis was performed by using a computer‐programmed standard operating procedure, and the product was purified on a semipreparative high‐performance liquid chromatography (HPLC) integrated with the synthesis module using 12% EtOH in 50 mM Na₂HPO₄. Finally, the percentage of alcohol was adjusted to 7% by adding Na₂HPO₄ and filtered through a Millipore filter to make dose for human. The radiochemical yield on the fluorination was 40±10% (n=10), and the overall yields were 4±1% (d. c.), from the end of the bombardment; [¹⁸F]FEAU (n=7) and [¹⁸F]FMAU (n=3). The radiochemical purity was >99%, specific activity was 1200–1300 mCi/µmol. The synthesis time was 2.5 h. This automated synthesis should be suitable for production of [¹⁸F]FIAU, [¹⁸F]FFAU, [¹⁸F]FCAU, [¹⁸F]FBAU and other 5‐substitued thymidine analogues. Copyright © 2009 John Wiley & Sons, Ltd.     

One‐step reductive etherification of 4‐[18F]fluoro‐benzaldehyde with decaborane

Reductive coupling reactions between 4‐[¹⁸F]fluoro‐benzaldehyde ([¹⁸F] 1 ) and different alcohols by use of decaborane (B₁₀H₁₄) as reducing agent have the potential to synthesize 4‐[¹⁸F]fluoro‐benzylethers in one step. [¹⁸F] 1 was synthesized from 4‐trimethylammonium benzaldehyde (triflate salt) via a standard fluorination procedure (K[¹⁸F]F/Kryptofix^® 222) in dimethylformamide at 90°C for 25 min and purified by solid‐phase extraction. Subsequently, reductive etherifications of [¹⁸F] 1 were performed as one‐step reactions with primary and secondary alcohols, mediated by B₁₀H₁₄ in acetonitrile at 60°C. Various 4‐[¹⁸F]fluorobenzyl ethers (6 examples are shown) were obtained within 1–2 h reaction time in decay‐corrected radiochemical yields of 12–45%. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of a phenolic precursor and its efficient O‐[18F]fluoroethylation with purified no‐carrier‐added [18F]2‐fluoroethyl brosylate as the labeling agent

[¹⁸F]2‐Fluoroethyl‐p‐toluenesulfonate also called [¹⁸F]2‐fluoroethyl tosylate has been widely used for labeling radioligands for positron emission tomography (PET). [¹⁸F]2‐Fluoroethyl‐4‐bromobenzenesulfonate, also called [¹⁸F]2‐fluoroethyl brosylate ([¹⁸F]F(CH₂)₂OBs), was used as an alternative radiolabeling agent to prepare [¹⁸F]FEOHOMADAM, a fluoroethoxy derivative of HOMADAM, by O‐fluoroethylating the phenolic precursor. Purified by reverse‐phase HPLC, the no‐carrier‐added [¹⁸F]F(CH₂)₂OBs was obtained in an average radiochemical yield (RCY) of 35%. The reaction of the purified and dried [¹⁸F]F(CH₂)₂OBs with the phenolic precursor was performed by heating in DMF and successfully produced [¹⁸F]FEOHOMADAM, after HPLC purification, in RCY of 21%. Copyright © 2013 John Wiley & Sons, Ltd.     

Degradation of acetonitrile in eluent solutions for [18F]fluoride PET chemistry: impact on radiosynthesis of [18F]FACBC and [18F]FDG

In [¹⁸F]fluoride chemistry, an eluent solution containing a weak aqueous base is used to release [¹⁸F]fluoride after adsorption on an anion exchange resin. Traditionally, the eluent solution is freshly prepared, but modern PET tracer manufacturers may utilize the benefits of preparing bulk solutions or prefilled vials for storage. We discovered that typical eluent solutions containing kryptofix and K₂CO₃ in aqueous acetonitrile degraded upon storage. Acetonitrile will at alkaline pH hydrolyse to acetamide and ammonium acetate. Acetate may serve as a competing nucleophile to [¹⁸F]fluoride. Eluent solutions used in the synthesis of [¹⁸F]FACBC and [¹⁸F]FDG generated mg/ml levels of acetamide and ammonium acetate during storage at room temperature or above. The synthesis of [¹⁸F]FACBC was prone to eluent degradation, with gradual reduction of radiochemical yield (RCY) from 62.5% to 44.7% during 12 months of storage at 30 °C. The synthesis of [¹⁸F]FDG was only affected when the eluent was stored at 50 °C, reducing the RCY from 86.8% to 66.7% after 3 months of storage. For degradation effects to be avoided, an alternative eluent solution with no acetonitrile was investigated in the synthesis of [¹⁸F]FACBC. A methanol‐based eluent was successfully made, showing no degradation and unchanged RCY after 6 months of storage at 50 °C. Copyright © 2012 John Wiley & Sons, Ltd.