The root and root canal anatomy of maxillary molars in a Chinese population

Abstract The purpose of this investigation was to study the prevalence of fused roots, C-shaped roots, C-shaped root canal orifices and C-shaped root canals in the maxillary molars of a Chinese population. A total of 305 first molars and 309 second molars were collected in Taiwan. The teeth were demineralized and placed in methyl salicylate to make them transparent. Root fusion was examined and the pulp chamber floor was checked for C-shaped orifices. Chinese ink was then injected into the root canal system to demonstrate possible C-shaped canals. The maxillary first molars had the palatal root fused with the mesiobuccal root in 0.3% of the cases, and with the distobuccal root in 2.0%. Teeth with C-shaped roots existed in only 0.3% of maxillary first molars, while 6.2% of the maxillary first molars and 40.1% of the maxillary second molars had fused roots. The maxillary second molars had the palatal root fused with the mesiobuccal root in 18.1% and with the distobuccal root in 2.6%; the palatal root was fused with the mesiobuccal and distobuccal root in 8.1% of the material. The maxillary second molars had a C-shaped root in 4.5% and C-shaped root canal orifices with C-shaped root canals in 4.9% of the cases. Fused roots or incompletely separated roots are common in the maxillary second molars amongst Chinese people, while C-shaped roots and root canals in maxillary molars are not frequently seen.     

Evaluation of Root Canal Configuration of Maxillary Molars in a Brazilian Population Using Cone-beam Computed Tomographic Imaging: An In Vivo Study

Introduction

The aim of this study was to analyze and characterize root canal morphology of maxillary molars of the Brazilian population using cone-beam computed tomographic (CBCT) imaging.

Methods

Patients referred for a CBCT radiographic examination for accurate diagnosis and treatment planning were enrolled in the study. A total of 620 healthy, untreated, fully developed maxillary first and second molars were included (314 first molars and 306 second molars). The following observations were recorded: (1) number of roots and their morphology, (2) number of canals per root, (3) fused roots, and (4) primary variations in the morphology of the root canal systems.

Results

First and second molars showed a higher prevalence of 3 separate roots, mesiobuccal, distobuccal, and palatal, with 1 canal in each root (52.87% and 45.09%, respectively). Two canals in the mesiobuccal roots represented 42.63% of teeth, whereas mesiobuccal roots of second molars presented 2 canals in 34.32%. The most common anatomic variation in the maxillary first molar was related to the root canal configuration of the mesiobuccal root, whereas the root canal system of the maxillary second molar teeth showed more anatomic variables.

Conclusions

Mesiobuccal roots of maxillary molar teeth had more variation in their canal system than the distobuccal or palatal roots. The root canal configuration of the maxillary second molars was more variable than the first molars in a Brazilian population. CBCT imaging is a clinically useful tool for endodontic diagnosis and treatment planning.     

Root and canal morphology of Thai maxillary molars

AIM: To investigate the root and canal morphology of 268 maxillary permanent molars collected from an indigenous Thai population. METHODOLOGY: The cleaned teeth were accessed, the pulp dissolved by sodium hypochlorite under ultrasonication, and the pulp system injected with Indian ink. The teeth were rendered clear by demineralization and immersion in methyl salicylate. The following observations were made: (i) number of roots and their morphology; (ii) number of root canals per root; (iii) root-canal configuration in each root using Vertucci's classification with additional modifications; and (iv) presence and location of lateral canals and intercanal communications. RESULTS: All the maxillary first and second molars had three separate roots. Only, half (51%) of the maxillary third molars had three separate roots; the other half had fused or conical roots. The majority of the distobuccal (98.1-100%) and palatal (100%) roots had type I canals. Over half of the mesiobuccal roots of first (65%) and second (55%) molars had two canals. The most common (44.2%) canal configuration in mesiobuccal roots of first molars was type IV (two canals, two foramina). A variety of canal types were found in the mesiobuccal roots of second molars. Maxillary third molars showed the greatest diversity of canal morphology. There was an increase in the prevalence of lateral canals towards the apical part of the roots and intercanal communications were present in 16% of each of first, second and third Thai maxillary molars. CONCLUSIONS: The mesiobuccal roots of Thai maxillary molars possessed a variety of canal system types. Over 50% of the first molars had a second mesiobuccal canal. The palatal and distobuccal canals mainly had type I canals. Only, a small proportion (7.3-13.3%) of the roots exhibited lateral canals which were the most common in the apical third     

山东地区人离体上颌第二恒磨牙牙根及根管形态观察

目的:观察山东地区人上颌第二恒磨牙牙根及根管形态的解剖特点。方法:于山东地区收集离体上颌第二恒磨牙118个,观察牙根形态及类型;应用透明牙标本法观察根管形态并按Vertucci八分类法对其进行分类。结果:118个上颌第二恒磨牙中以3根分离者为主,占91.52%,牙根融合者共10例,占8.47%,其中融合成2根者为5.08%,主要为近中颊根与远中颊根融合;融合成单根者为3.39%。透明牙标本法下观察根管系统,上颌第二恒磨牙远中颊根及腭根根管以Ⅰ型为主;近颊根根管仅44.95%为Ⅰ型,近颊根第二根管(the second mesiobuccal canal,MB2)的发生率达51.38%。结论:山东地区上颌第二恒磨牙的牙根具有多样性,以3根分离根形态为主,同时可发生各种融合根;其根管形态复杂,MB2的发现率较高。     

上颌第一磨牙根管系统的研究

目的 观察上颌第一磨牙的根管系统。方法 制备50个上颌第一磨牙透明牙标本,显露根管系统的空间构型,在体视显微镜下观察并记录根管系统的形态,结合应用加以统计。结果 ①上颌第一磨牙近中颊根单根管率为66%,其中Ⅰ型占38%,双根管率为34%,远中颊根Ⅰ型占74%,腭根Ⅰ型占94%。②根管侧支、根尖分歧、根尖分叉多见于近颊根,在近颊根的发生率为40%, 远颊根的发生率为24%,腭根的发生率为6%,发生部位多见于根尖1/3。结论 上颌第一磨牙近颊根的根管系统最为复杂,根管变异较远颊根多,腭根变异最少。     

上颌第二磨牙近颊融合根中MB2的锥束CT研究

目的:通过锥束CT技术研究上颌第二磨牙近颊融合根中MB2的发生率。方法:收集199例患者的上颌第二磨牙CBCT数据,观察牙根融合类型、年龄以及牙位对MB2发生的影响。结果:199例患者共有380颗上颌第二磨牙,其中145颗牙的近中颊根与其他牙根融合;近远中颊根融合型(Ⅰ型)和近中颊根腭根融合型(Ⅱ型)的MB2发生率分别是5.5%、41.9%,而全融合型(Ⅲ型)则未发现MB2,Ⅰ、Ⅲ型融合的MB2发生率低于Ⅱ型;随着年龄增大,MB2发生率降低;181例具有双侧上颌第二磨牙的患者中,左右两侧融合根及MB2的发生率无显著差异。结论:上颌第二磨牙近中颊根与其他牙根融合时,其MB2发生率会出现变异。     

Root and root canal morphology of the human permanent maxillary first molar: a literature review

The objective of this study was to review the literature with respect to the root and canal systems in the maxillary first molar. Root anatomy studies were divided into laboratory studies (in vitro), clinical root canal system anatomy studies (in vivo) and clinical case reports of anomalies. Over 95% (95.9%) of maxillary first molars had three roots and 3.9% had two roots. The incidence of fusion of any two or three roots was approximately 5.2%. Conical and C-shaped roots and canals were rarely found (0.12%). This review contained the most data on the canal morphology of the mesiobuccal root with a total of 8399 teeth from 34 studies. The incidence of two canals in the mesiobuccal root was 56.8% and of one canal was 43.1% in a weighted average of all reported studies. The incidence of two canals in the mesiobuccal root was higher in laboratory studies (60.5%) compared to clinical studies (54.7%). Less variation was found in the distobuccal and palatal roots and the results were reported from fourteen studies consisting of 2576 teeth. One canal was found in the distobuccal root in 98.3% of teeth whereas the palatal root had one canal in over 99% of the teeth studied.     

Root canal morphology of the mesiobuccal root in maxillary first molars of a Jordanian population

This in vitro study investigated the presence of second (MB2) root canals and the number of apical foramina found in mesiobuccal roots of the permanent maxillary first molars; in addition, the study evaluated the effectiveness of magnification to detect MB2 canals. One hundred extracted maxillary first molars were collected from Jordanian patients. The number of roots (as well as their morphology) was investigated. The number of canal orifices in mesiobuccal root was assessed, with and without magnification, and findings were compared. The number of apical foramina and the distance between mesiobuccal and second canal orifices were investigated under magnification. Of the 97 specimens that were subject to additional investigation, all teeth had three separated roots, except for three specimens that had either mesiobuccal or distobuccal roots fused with the palatal root. The number of MB2 canals that were detected increased from 55 (56.7%) to 61 (62.9%) teeth when magnification was used. Within the limits of this in vitro study, it was concluded that the Jordanian population had a high percentage of MB2 canals in the mesial buccal roots. Moreover, the use of clinically used magnifying devices increased the number of MB2 canals detected.     

上颌第一、第二恒磨牙牙根和根管系统的锥形束CT研究

目的：运用锥形束CT（CBCT）观察中国人群双侧上颌第一、第二磨牙的牙根和根管系统的解剖形态,为临床根管治疗提供依据。方法：选择200名患者的双侧上颌第一、第二恒磨牙（上颌第一恒磨牙354颗、上颌第二恒磨牙360颗）的CBCT扫描数据,使用NNT软件分析上颌第一、第二恒磨牙的牙根数、根管数、根管分型以及双侧对称情况。结果：上颌第一、第二磨牙主要为三根（99.44%和84.44%）。上颌第二磨牙的单根和双根较多见（15.28%）,其根管系统形态复杂,在根尖区有融合趋势。上颌第一磨牙的根管系统主要为3根四根管（78.97%）。上颌第二磨牙的三根管和四根管发现率接近（分别为47.37%和51.64%）。上颌第一磨牙的近颊根管系统主要根管分型为：Ⅳ型（57.79%）、Ⅱ型（19.83%）和Ⅰ型（15.58%）。上颌第二磨牙的近颊根管系统主要根管分型为：Ⅰ型（48.14%）、Ⅳ型（30.43%）和Ⅱ型（17.39%）。上颌第一、第二磨牙的远颊根和腭根主要为单根单根管,存在少量和罕见的变异。上颌第一、第二磨牙近颊根的根管数目和根管分型左右对称。结论：上颌第一磨牙近颊根管系统变异普遍存在,MB2根管为其主要的变异形式。上颌第二磨牙牙根数目和根管形态变异类型多,单根牙和双根牙的根管走向复杂多变。CBCT可以为识别根管形态提供准确依据。     

A study of the distobuccal root canal orifice of the maxillary second molars in Chinese individuals evaluated by cone-beam computed tomography

As is commonly understood, the root canal morphology of the maxillary molars is usually complex and variable. It is sometimes difficult to detect the distobuccal root canal orifice of a maxillary second molar with root canal treatment. No literature related to the distobuccal root canals of the maxillary second molars has been published.

Objective

To investigate the position of the distobuccal root canal orifice of the maxillary second molars in a Chinese population using cone-beam computed tomography (CBCT).

Material and methods

In total, 816 maxillary second molars from 408 patients were selected from a Chinese population and scanned using CBCT. The following information was recorded: (1) the number of root canals per tooth, (2) the distance between the mesiobuccal and distobuccal root canal orifice (DM), (3) the distance between the palatal and distobuccal root canal orifice (DP), (4) the angle formed by the mesiobuccal, distobuccal and palatal root canal orifices (∠ PDM). DM, DP and ∠ PDM of the teeth with three or four root canals were analyzed and evaluated.

Results

In total, 763 (93.51%) of 816 maxillary second molars had three or four root canals. The distance between the mesiobuccal and distobuccal orifice was 0.7 to 4.8 mm. 621 (81.39%) of 763 teeth were distributed within 1.5-3.0 mm. The distance between the palatal and distobuccal orifice ranged from 0.8 mm to 6.7 mm; 585 (76.67%) and were distributed within 3.0-5.0 mm. The angle (∠ PDM) ranged from 69. 4º to 174.7º in 708 samples (92.80%), the angle ranged from 90º to 140º.

Conclusions

The position of the distobuccal root canal orifice of the maxillary second molars with 3 or 4 root canals in a Chinese population was complex and variable. Clinicians should have a thorough knowledge of the anatomy of the maxillary second molars.     

Root and canal morphology of mandibular first and second permanent molar teeth in a Ugandan population

We investigated root and canal morphology of permanent mandibular molar teeth in a Ugandan population. Mandibular first (n = 224) and second (n = 223) molars were collected from patients visiting dental clinics in Kampala and prepared by a clearing technique. An endodontic access cavity was prepared in each tooth. The teeth were consecutively immersed in 5% sodium hypochlorite, 10% nitric acid, and 99% methyl salicylate. India ink was coronally injected into the pulp chamber and withdrawn apically by suction. The teeth were viewed under a magnifying lens and the numbers of root canals and their configurations, lateral canals, intercanal communications, and multiple apical foramina were recorded, along with the number of roots and their morphology. Student’s t test for independent samples was used to assess significant differences in the root canal system. All specimens were two-rooted with one mesial and one distal root. Root fusion was more frequent in the second than in the first molar: 3.2% versus 0.4%. Vertucci type IV canal configuration was most frequently recorded in the mesial root of the first (44.6%) and second (49.8%) molars. Type 1 canal configuration was predominant in the distal root in first (84.8%) and second (94.2%) molars. Multiple apical foramina were more frequent in the first than in the second molar, as were intercanal communications and lateral canals. Type I and IV canal configurations were predominant in the distal and mesial roots, respectively, of both the first and second molars.     

Root and canal morphology of the mesiobuccal and distal roots of permanent first molars in a Kuwait population--a clinical study

Aim To identify the number of roots and canal configurations in permanent first molars of the indigenous Kuwaiti sub‐population and compare them against a similar group of non‐Kuwaiti population in different age groups and gender, and to determine the frequency of a second canal in the mesiobuccal root of maxillary first molars and distal root of mandibular first molars that could be located and treated in routine practice without using magnification or special lighting conditions. Methodology A total of 220 permanent first molar teeth of patients scheduled for root canal treatment over a period of 1 year were included. Patients were identified and grouped according to their nationality as Kuwaiti and non‐Kuwaiti (which included Filipinos, Indonesian Indians, Srilankans, Egyptians, Saudi Arabians and Syrians). In both nationality groups, patients were successively distributed into four groups based on their age. The first age group included patients below 20 years, the second 21–30 years, the third 31–40 years and the fourth were over 40 years. The first three groups comprised of 15 male and 15 female patients whilst the fourth group had 10 patients of each gender. Teeth with open apices, resorptions and calcification were excluded from the study. The teeth included were both clinically and radiographically examined for number of roots, the canal configuration and the presence of the additional mesiobuccal and distal canals and recorded. The simplified classification of canal configurations proposed by Weine was utilized. Results The incidence of a second canal in the mesiobuccal (MB) root of maxillary first molars and the distal root of mandibular first molars was not influenced significantly by nationality and gender. All the 110 maxillary first molars treated had three roots; 58% of MB root had one canal and 42% had two canals. The majority of the mesial roots had Weine type II canal configuration when the second mesiobuccal canal was present. All distobuccal and palatal roots had a single or type I canal configuration. Of the 110 mandibular first molars that were treated, 96% had two roots and 4% had three roots. When present, the third root was located either buccal or lingual to the main distal root. Overall 51% of the single distal roots had one canal whilst 49% had two canals. The mesial root frequently had a Weine type II canal configuration as did the distal root when a second canal was present. Pearson’s correlation analysis of both molars revealed a significant (P < 0.05) negative correlation (r = ?0.274, r = ?0.144) between age and number of canals as well as the type of canal. Conclusions The incidence of a second canal in distal roots of permanent mandibular first molars was 49% in the Kuwaiti population and this was similar to other Asian ethnic populations. Adopting modified access and troughing procedures revealed a 42% frequency of MB2 canals in maxillary first molars. The incidence of a second canal in both mesiobuccal roots of maxillary molars and distal roots of mandibular molars decreased significantly with age; no differences were noticed amongst the nationalities and gender studied. The possibility of extra roots should be anticipated in mandibular molars.     

Canal configuration of the mesiobuccal root of the maxillary first molar of a Japanese sub-population

AIM: The aim of this study was to determine the percentage of anatomical canal configurations of the mesiobuccal root of the maxillary first molar in Japanese patients. METHODOLOGY: Three hundred teeth were obtained from general dentists who knew absolutely that they were extracted from Japanese patients. The distobuccal and palatal roots were amputated for radiographic convenience. Preoperative radiographs were taken of the remaining crown and mesiobuccal root (MBR) from mesiodistal and buccopalatal directions for each tooth. Routine endodontic access cavities were prepared and size 08 files were placed through the orifice into the MBR until they were seen at the apex. In some cases preparation of the canal orifice with a long shank round burr was necessary to gain access. In seven teeth, no access to the apex was possible and these teeth were eliminated. In the other 293 teeth, the MBR canal(s) was (were) enlarged up to size 15 file. If another canal opening was found at the apex a 08 file was inserted into the second opening and passed coronally. Postoperative radiographs with file(s) in place were taken from the two directions, as before. RESULTS: Of the 293 teeth, 123 (42.0%) were Type II, 89 (30.4%) showed Type III systems and 10 (3.4%) were Type IV. Suggestions for identification and treatment of the second canal in the MBR are presented. CONCLUSIONS: The proportion of cases with two canals in the mesiobuccal root of maxillary first molars from Japanese patients was high and similar to that described from studies of other ethnic populations.     

Root and Root Canal Morphology in Maxillary Second Molar with Fused Root from a Native Chinese Population

Introduction

Root fusion is an anatomic variation in maxillary second molars (MSMs); however, the nature of this canal morphology as it relates to its root anatomy has not been fully clarified. The purpose of this study was to investigate the relationship between features of fused roots and root canal anatomy in MSMs using micro–computed tomographic imaging.

Methods

One hundred eighty-seven extracted MSMs were scanned with the μCT50 (Scanco Medical, Bassersdorf, Switzerland), and their root and canal morphology was classified and analyzed using the classifications proposed by Yang and Vertucci. The number and position of canals that merged were recorded and compared among different root fusion types.

Results

One hundred eight (57.75%) MSMs had 3 separate roots, and 79 (42.25%) had fused roots. Of the 79 fused roots, 22 showed partial canal merging, and 6 had complete canal merging. Canal merging was found with teeth with 3-root fusion more often than in those with 2-root fusion (P < .05). Of 28 merged canals, 16 occurred between mesiobuccal and distobuccal canals and 9 among mesiobuccal, distobuccal, and palatal canals.

Conclusions

MSMs with fused roots may present a complicated root canal system as a result of canal merging.     

上颌第一恒磨牙变异根管的诊治

目的探讨上颌第一恒磨牙变异根管在根管治疗中的诊断及治疗对策。方法1例上颌第一恒磨牙的再治疗病例，清理髓腔后在手术显微镜下超声器械小心钻磨髓室底，牙髓探针仔细探查，在近中侧发现第二个腭侧根管口，近颊根近舌根管与近颊根管融合，常规逐步后退法预备探查到的4个根管，冷牙胶侧方加压技术充填根管。结果术后10个月复查，患者无主观症状，患牙能正常行使功能，X线片显示根尖无病变，临床检查患牙无异常表现。结论术前X线片对于上颌第一恒磨牙变异根管的诊断及发生部位的确定有较大帮助，治疗中完全去除髓室顶、仔细探查髓室底和显微超声技术的应用有助于寻找、发现并疏通遗漏根管。     

The maxillary second molar: variations in the number of roots and canals

A retrospective study was undertaken of 520 completed endodontic treatments of maxillary second molar teeth which were selected from a specialty endodontic practice. Radiographs were reviewed and studied, a classification of antomical root and canal variations was devised, and the frequency with which each variant occurred was recorded. There were six variants which occurred frequently enough to be considered as separate anatomic categories and their frequency of occurrence is illustrated. The six variants found in the study and their frequency of occurrence are as follows: (1) three separate roots and three separate canals (56.9%); (2) three separate roots and four canals (two in the mesiobuccal root) (22.7%); (3) three roots and canals whose mesiobuccal and distobuccal canals combine to form a common buccal with a separate palatal (9%); (4) two separate roots with a single canal in each (6.9%); (5) one main root and canal (3.1%); and (6) four separate roots and four separate canals including two palatal (1.4%). Clinical examples of these deviant variations are also presented.     

Identification and Characterization of a Previously Undiscovered Anatomical Structure in Maxillary Second Molars: The Palato-Mesiobuccal Canal

IntroductionThis report aims to communicate the discovery of a novel anatomy in a 3-rooted maxillary second molar, named as palato-mesiobuccal canal.MethodsThe tooth selected for this report was found incidentally as a result of a study on extracted maxillary molars that was being conducted for an unrelated purpose and involved hundreds of teeth. This 3-rooted maxillary second molar was scanned using a micro–computed tomography device set at a pixel size of 13.68 μm. The images were reconstructed with previously tested parameters resulting in the acquisition of 1655 axial cross-sections. Three-dimensional (3D) models of the internal and external anatomies were generated in Standard Tessellation Language (STL) format and were texturized to simulate the pulp tissue. The inner structure of the tooth was analyzed through the axial cross sections and the 3D volume was qualitatively evaluated.ResultsThe analysis of the 3D models revealed that the maxillary second molar under examination has 3 independent roots and 4 root canals. Each root (mesiobuccal, distobuccal, and palatal) contains 1 canal, while the fourth canal follows a unique path, originating in the coronal third of the palatal canal and proceeding in a buccal direction ultimately exiting through an independent foramen at the apex of the mesiobuccal root, near the mesiobuccal canal.ConclusionsThis brief communication reports the discovery of a novel anatomy in a 3-rooted maxillary second molar, named as palato-mesiobuccal canal, and provides important insights into the complexity of the root canal system in this group of teeth.     

Detection of the second mesiobuccal canal in mesiobuccal roots of maxillary molar teeth ex vivo

AIM: To assess the effectiveness of magnification and dentine removal (troughing) when locating the second mesiobuccal canal in mesiobuccal roots of maxillary molars. METHODOLOGY: A total of 208 extracted human maxillary molars were examined. After crown and pulp removal, the MB1 and 2 canals in the mesiobuccal root were located in three stages that were performed by two undergraduate dental students. Stage 1: canals were located with an endodontic explorer; stage 2: additional canals in the same teeth were located under magnification with a digital microscope (VH-8000, Keyence, Japan); stage 3: additional canals in the same teeth were located by removing dentine (troughing) from the pulp chamber floor within 3 mm from MB1 canal towards the palatal canal with an Enac ultrasonic tip (ST 21, Osada, Japan). In each group, the canals were prepared with Gates Glidden burs and K-files. The distal and palatal roots were then removed, and Indian ink was injected into the canal system within the mesio-buccal root. The root surfaces were washed with 6% NaOCl, and then rendered transparent to observe canal morphology. The root canal configurations were classified into five categories following the modified Weine's classification. RESULTS: More than one canal in the mesio-buccal root was observed in 48% of specimens. Detection rates of multiple canals were 7, 18 and 42% following stages 1, 2 and 3, respectively. There was a significant difference between the stages for detecting the MB2 canal (P < 0.05, Friedman test). CONCLUSIONS: Both magnification (stage 2) and dentine removal under magnification (stage 3) were effective in detecting the presence of the MB2 canal. However, MB2 canals could not be detected in 13% of the teeth because of canal calcification or branching located more apically.     

Root and canal morphology of Burmese maxillary molars

AIM: To investigate the root and canal morphology of Burmese maxillary molars using a canal staining and tooth clearing technique. METHODOLOGY: Maxillary molars (239) were collected from indigenous Burmese patients and designated; first (90), second (77), third (72) molars. Following pulp tissue removal and canal system staining with Indian ink, the teeth were decalcified with 10% nitric acid, dehydrated and cleared with methyl salicylate. The following features were evaluated: (i) number of roots and morphology; (ii) number of canals per root: (iii) root canal configuration (Vertucci's classification); (iv) number of apical foramina per root; (v) number and location of lateral canals; and (vi) the presence of intercanal communications. RESULTS: All first and second molars had three separate roots, whilst third molars had one of five different root forms, of which three separate (25%) or fused (31%) roots were most prevalent. The majority of palatal (100%) and disto-buccal (96%) roots possessed one canal (type I). The prevalence of mesio-buccal roots with two canals decreased from first to third molars (68%, 49%, 39%, respectively); type II (two orifices, one apical foramen) and IV (two orifices, two apical foramina) configurations were the most common. Single/fused rooted third molars had a range of number and type of canals. Most roots in all molars had one apical foramen, those with four apical foramina were confined to third molars. Intercanal communications were most prevalent in mesio-buccal roots and two/three fused rooted third molars. Lateral canals were most prevalent in the apical third of the roots of all molars. CONCLUSIONS: The mesio-buccal roots of Burmese maxillary molars possessed a variety of canal system types. Over 50% of the first and second molars had a second mesio-buccal canal, of which over 20% had intercanal communications. The palatal and disto-buccal canals mainly had type I canals. Lateral canals were equally prevalent in all tooth types but were most common in the apical third.     

Root canal anatomy of maxillary first and second permanent molars

AIM: The aim of this investigation was to study the root canal anatomy of maxillary first and second molar teeth from an Irish population sample using a clearing technique. METHODOLOGY: Eighty-three extracted permanent maxillary right first molars and 40 permanent right maxillary second molars were included in this investigation. The specimens were demineralized and then cleared using methyl salicylate. The following observations were made: number of roots, prevalence of fusion, types of root canals using Vertucci's classification, presence and position of lateral canals, presence and position of transverse anastomoses, number and position of apical foramina and the frequency of occurrence of apical deltas. RESULTS: Eleven per cent of maxillary first molars and 43% of maxillary second molars had fused roots. A total of 78% of mesiobuccal roots in maxillary first and 58% in maxillary second molars had two canals. Sixty-two per cent of maxillary first and 50% of maxillary second molars had two apical foramina. There was a significant inverse relationship between age and the occurrence of two canals and between age and the occurrence of transverse anastomoses in both tooth morphotypes (P < or = 0.05). CONCLUSIONS: It is concluded that a significant proportion of the first and second molar specimens studied had two canals in the mesiobuccal root (78% and 58%, respectively) and that the occurrence of two canals and transverse anastomoses decreased significantly with increasing age.