Experimental and Theoretical Study of Radiation Shielding Features of CaO-K2O-Na2O-P2O5 Glass Systems

The gamma radiation shielding ability for CaO-K₂O-Na₂O-P₂O₅ glasses were experimentally determined between 0.0595 and 1.41 MeV. The experimental MAC results were compared with theoretical results obtained from the XCOM software to test the accuracy of the experimental values. Additionally, the effect of increasing the P₂O₅ in the glass composition, or reducing the Na₂O content, was evaluated at varying energies. For the fabricated glasses, the experimental data strongly agreed with the XCOM results. The effective atomic number (Z_eff) of the fabricated glasses was also determined. The Z_eff values start out at their maximum (12.41–12.55) at the lowest tested energy, 0.0595 MeV, and decrease to 10.69–10.80 at 0.245 MeV. As energy further increases, the Z_eff values remain almost constant between 0.344 and 1.41 MeV. The mean free path (MFP) of the fabricated glasses is investigated and we found that the lowest MFP value occurs at the lowest tested energy, 0.0595 MeV, and lies within the range of 1.382–1.486 cm, while the greatest MFP can be found at the highest tested energy, 1.41 MeV, within the range of 8.121–8.656 cm. At all energies, the KCNP40 sample has the lowest MFP, while the KCNP60 sample has the greatest. The half value layer (HVL) for the KCNP-X glasses is determined. For all the selected energies, the HVL values follow the order of KCNP40 < KCNP45 < KCNP50 < KCNP55 < KCNP60. The HVL of the KCNP50 sample increased from 0.996 to 2.663, 3.392, 4.351, and 5.169 cm for energies of 0.0595, 0.245, 0.444, 0.779, and 1.11 MeV, respectively. The radiation protection efficiency (RPE) results reveal that decreasing the P₂O₅ content in the glasses improves the radiation shielding ability of the samples. Thus, the KCNP40 sample has the best potential for photon attenuation applications.     

Influence of Bi2O3 on Mechanical Properties and Radiation-Shielding Performance of Lithium Zinc Bismuth Silicate Glass System Using Phys-X Software

We analyzed the mechanical properties and radiation-shielding performance of a lithium zinc bismuth silicate glass system. The composition of these glasses is 20ZnO-30Li₂O-(50-x)SiO₂-xBi₂O₃ (x varies between 10 and 40 mol%). The mechanical properties of the investigated glass system, such as Young’s modulus (E), bulk modulus (K), shear modulus (S), and longitudinal modulus (L), were determined using the Makishima–Mackenzie model. The elastic moduli gradually decreased with the addition of Bi₂O₃. E decreased from 46 to 31 GPa, K decreased from 27 to 14 GPa, S decreased from 19 to 14 GPa, and L decreased from 52 to 32 GPa as Bi₂O₃ was substituted for SiO₂. The mass attenuation coefficient (MAC) was investigated at energies between 0.284 and 1.33 MeV to understand the radiation-shielding performance of the glasses. The MAC value increased when SiO₂ was replaced by Bi₂O₃. We found that the effect of Bi₂O₃ on MAC values was noticeably stronger at energies of 0.284 and 0.347 MeV, while the effect of Bi₂O₃ on MAC values became weaker as energy increased. The linear attenuation coefficient (LAC) results demonstrated that if the samples were exposed to low-energy photons, the glass could prevent the penetration of photons, and thus, the glass samples were effective in radiation protection. The LAC values for the lowest- and highest-density samples changed from 0.998 to 1.976 cm⁻¹ (at 0.284 MeV) and from 0.286 to 0.424 cm⁻¹ (at 0.826 MeV). According to the radiation-shielding results, the thick, high-density glass sample has special and distinctive shielding properties.     

Fabrication of Lead Free Borate Glasses Modified by Bismuth Oxide for Gamma Ray Protection Applications

In the present work, bismuth borate glass samples with the composition of (99-x) B₂O₃ + 1Cr₂O₃ + (x) Bi₂O₃ (x = 0, 5, 10, 15, 20, and 25 wt %) were prepared using the melt quenching technique. The mass attenuation coefficient (MAC) of the prepared glass samples was measured through a narrow beam technique using a NaI(Tl) scintillation detector. Four point sources were used (²⁴¹Am, ¹³³Ba, ¹⁵²Eu, and ¹³⁷Cs) to measure the MAC for the prepared glasses. The experimental data were compared with the theoretical results obtained from the XCOM, and it was shown that for all samples at all tested energies, the relative deviation between the samples is less than 3%. This finding signifies that the experimental data can adequately be used to evaluate the shielding ability of the glasses. The MAC of the sample with x = 25 wt % was compared with different lead borate glasses and the results indicated that the present sample has high attenuation which is very close to commercial lead borate glasses. We determined the transmission factor (TF), and found that it is small at low energies and increases as the energy increases. The addition of Bi₂O₃ leads to reduction in the TF values, which improves the shielding performance of the glass system. The half value layer (HVL) of the BCrBi-10 sample was 0.400 cm at 0.595 MeV, 1.619 cm at 0.2447 MeV, and 4.946 cm at 1.4080 MeV. Meanwhile, the HVL of the BCrBi-20 sample is equal to 0.171 and 4.334 cm at 0.0595 and 1.4080 MeV, respectively. The HVL data emphasize that higher energy photons tend to penetrate through the glasses with greater ease than lower energy photons. Furthermore, the fast neutron removable cross section (FNRC) was determined for the present samples and compared with lead borate glass and concrete, and the results showed a remarkable superiority of the bismuth borate glass samples.     

Understanding the Effect of Introducing Micro- and Nanoparticle Bismuth Oxide (Bi2O3) on the Gamma Ray Shielding Performance of Novel Concrete

The aim of this study is to investigate the radiation shielding properties of novel concrete samples with bulk Bi₂O₃ and Bi₂O₃ nanoparticles (Bi₂O₃ NP) incorporated into its composition. The mass attenuation coefficient of the concrete samples without Bi₂O₃ and with 5 and 7 wt% bulk Bi₂O₃ were experimentally determined and were compared against values obtained using the XCOM and Geant4 simulations. Both methods greatly agree with the experimental values. The linear attenuation coefficients (LAC) of blank concrete (C-0), concrete with 5% bulk Bi₂O₃ (C-B5), and concrete with 5% nanoparticle Bi₂O₃ (C-N5) were determined and compared at a wide energy range. We found that the LAC follows the trend of C-0 < C-B5 < C-N5 at all the tested energies. Since both C-B5 and C-N5 have a greater LAC than C-0, these results indicate that the addition of Bi₂O₃ improves the shielding ability of the concretes. In addition, we investigated the influence of nanoparticle Bi₂O₃ on the LAC of the concretes. The half-value layer (HVL) for the concretes with bulk Bi₂O₃ and Bi₂O₃ nanoparticles is also investigated. At all energies, the C-0 has the greatest HVL, while C-N15 has the least. Thus, C-N15 concrete is the most space efficient, while C-0 is the least space efficient. The radiation protection efficiency (RPE) of the prepared concretes was found to decrease with increasing energy for all five samples. For C-0, the RPE decreased from 63.3% at 0.060 MeV to 13.48% at 1.408 MeV, while for C-N15, the RPE decreased from 87.9 to 15.09% for the same respective energies. Additionally, C-N5 had a greater RPE than C-B5, this result demonstrates that Bi₂O₃ NP are more efficient at shielding radiation than bulk Bi₂O₃.     

Thermal Stability,Optical Properties,and Gamma Shielding Properties of Tellurite Glass Modified with Potassium Chloride

The synthesized glass system with a composition of (80-x) TeO₂-10P₂O₅-10Nb₂O₅-xKCl mol% (where x = 5, 10, 15, 20, and 25) was successfully fabricated. The density (ρ) and molar volume (V_m) have been calculated. The investigated glasses were characterized using different analysis methods (differential thermal analysis (DTA) and UV-VIS-NIR spectroscopy). The radiation shielding effectiveness of the synthesized glass system was evaluated using different shielding parameters, such as mass and linear attenuation coefficients (MAC, LAC), half-value layer (HVL), mean free path (MFP), effective atomic number (Z_eff), and effective electron number (N_eff). The results showed that with the increasing potassium chloride (KCl) concentration and decreasing tellurium oxide (TeO₂) concentration, the density, refractive index, Urbach energy (E_u), and glass transition temperature (T_g) decreased, while the optical energy gap (E_opt) and thermal stability increased. As the KCl concentration increases, the values of MAC, LAC, and Z_eff increase in the following order: TPNK5 % > TPNK10 % > TPNK15 % > TPNK20 % > TPNK25 %. Additionally, the shielding effectiveness of TPNK glass system showed good performance compared with some standard materials. The synthesized glass with a minimum KCl content has both good shielding effectiveness and good optical properties, in addition to reasonable thermal stability, which makes it suitable for shielding and optical applications.     

The Vital Role of La2O3 on the La2O3-CaO-B2O3-SiO2 Glass System for Shielding Some Common Gamma Ray Radioactive Sources

The role La₂O₃ on the radiation shielding properties of La₂O₃-CaO-B₂O₃-SiO₂ glass systems was investigated. The energies were selected between 0.284 and 1.275 MeV and Phy-X software was used for the calculations. BLa10 glass had the least linear attenuation coefficient (LAC) at all the tested energies, while BLa30 had the greatest, which indicated that increasing the content of La₂O₃ in the BLa-X glasses enhances the shielding performance of these glasses. The mass attenuation coefficient (MAC) of BLa15 decreases from 0.150 cm²/g to 0.054 cm²/g at energies of 0.284 MeV and 1.275 MeV, respectively, while the MAC of BLa25 decreases from 0.164 cm²/g to 0.053 cm²/g for the same energies, respectively. At all energies, the effective atomic number (Z_eff) values follow the trend BLa10 < BLa15 < BLa20 < BLa25 < BLa30. The half value thickness (HVL) of the BLa-X glass shields were also investigated. The minimum HVL values are found at 0.284 MeV. The HVL results demonstrated that BLa30 is the most space-efficient shield. The tenth value layer (TVL) results demonstrated that the glasses are more effective attenuators at lower energies, while decreasing in ability at greater energies. These mean free path results proved that increasing the density of the glasses, by increasing the amount of La₂O₃ content, lowers MFP, and increases attenuation, which means that BLa30, the glass with the greatest density, absorbs the most amount of radiation.     

Evaluation of the Radiation Shielding Properties of a Tellurite Glass System Modified with Sodium Oxide

In this study, the X-ray and gamma attenuation characteristics and optical properties of a synthesized tellurite–phosphate–sodium oxide glass system with a composition of (85 − x)TeO₂–10P₂O₅–xNa₂O mol% (where x = 15, 20, and 25) were evaluated. The glass systems we re fabricated by our research group using quenching melt fabrication. The shielding parameters of as-synthesized systems, such as the mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), effective atomic number (Z_eff), half-value layer (HVL), tenth value layer (TVL), mean free path (MFP), and effective electron density (N_eff) in a wide energy range between 15 keV and 15 MeV, were estimated using well-known PHY-X/PSD software and recently developed MIKE software. Herein, the optical parameters of prepared glasses, such as molar volume (V_M), oxygen molar volume (V_O), oxygen packing density (OPD), molar polarizability (αm), molar refractivity (R_m), reflection loss (R_L), and metallization (M), were estimated using MIKE software. Furthermore, the shielding performance of the prepared glasses was compared with that of commonly used standard glass shielding materials. The results show that the incorporation of sodium oxide into the matrix TeO₂/P₂O₅ with an optimum concentration can yield a glass system with good shielding performance as well as good optical and physical properties, especially at low photon energy.     

Influence of ZnF2 and WO3 on Radiation Attenuation Features of Oxyfluoride Tellurite WO3-ZnF2-TeO2 Glasses Using Phy-X/PSD Software

The radiation shielding features of the ternary oxyfluoride tellurite glasses were studied by calculating different shielding factors. The effect of the TeO₂, WO_3, and ZnF₂ on the tested glass system’s attenuating performance was predicted from the examination. The mass attenuation coefficient (µ/ρ) values for the oxyfluoride tellurite glasses depend highly on the concentration of WO_3, as well as ZnF₂. All the present ZnFWTe1-ZnFWTe5 samples have higher µ/ρ values than that of the pure TeO₂ glass at all energies. For the samples with a fixed content of WO₃, the replacement of TeO₂ by ZnF₂ increases the µ/ρ, while for the glasses with a fixed content of TeO₂, the replacement of WO₃ by ZnF₂ results in a decline in the µ/ρ values. The results revealed that ZnFWTe4 has the lowest linear attenuation coefficient (µ) among the oxyfluoride tellurite glasses, whereby it has a slightly higher value than pure TeO₂ glass. The maximum effective atomic number (Z_eff) is found at 0.284 MeV and varied between 31.75 and 34.30 for the tested glasses; it equaled to 30.29 for the pure TeO₂ glass. The half-value layer (HVL) of the glasses showed a gradual decline with increasing density. The pure TeO₂ was revealed to have thicker HVL than the selected oxyfluoride tellurite glasses. A 1.901-cm thickness of the sample, ZnFWTe1, is required to decrease the intensity of a photon with an energy of 0.284 MeV to one-tenth of its original, whereas 1.936, 1.956, 2.212, and 2.079 cm are required for glasses ZnFWTe2, ZnFWTe3, ZnFWTe4, and ZnFWTe5, respectively.     

Nonlinear Optical Limiting and Radiation Shielding Characteristics of Sm2O3 Doped Cadmium Sodium Lithium Borate Glasses

Strong nonlinear absorption (NLA), reduced optical limiting (OL) thresholds, and high radiation shielding parameters are required for the effective use of glasses in the laser radiation and nuclear radiation protecting materials. In view of this, the efficacy of Sm₂O₃ on the nonlinear optical (NLO) and OL properties were ascertained (at 532 nm) along with radiation shielding characteristics. The open and closed aperture Z-scan profiles revealed the presence of positive NLA and nonlinear refraction (NLR) phenomena respectively. OL measurements showed the existence of limiting behavior in the studied glasses. The NLA and NLR coefficients were improved while the OL thresholds were decreased as the doping of Sm₂O₃ elevated to a higher doping level. These improvements in NLA, NLR coefficients and OL efficiencies were attributed to the non-bridging oxygens and high polarizable Sm³⁺ ions. The NLA and OL results clearly suggest the high (5 mol %) Sm₂O₃ doped glass (Sm5CNLB) glass is beneficial to protect the delicate devices and human eye by suppressing the high energy laser light. The theoretical linear attenuation coefficients (LAC) values of the presented SmxCNLB glasses were obtained with the help of Phy-X software between 0.284 and 1.333 MeV. At 0.284 MeV, the maximum values occur and take values between 0.302 (for Sm0CNLB) and 0.409 cm⁻¹ (for Sm5CNLB). We found that the LAC for the presented SmxCNLB glasses is a function of Sm₂O₃ content, where the LAC tends to increase, corresponding to the high probabilities of interaction, as the content of Sm₂O₃ changes from 0 to 5 mol %. The effective atomic number (Z_eff) for the presented SmxCNLB glasses was examined between 0.284 and 1.333 MeV. As the amount of Sm₂O₃ is added, the Z_eff increases, and this was observed at any energy.     

Trivalent Ions and Their Impacts on Effective Conductivity at 300 K and Radio-Protective Behaviors of Bismo-Borate Glasses: A Comparative Investigation for Al,Y, Nd,Sm, Eu

We aimed to determine the contribution of various trivalent ions like Al and rare-earths (Y, Nd, Sm, Eu) on resistance behaviors of different types of bismo-borate glasses. Accordingly, eight different bismuth borate glasses from the system: 40Bi₂O₃–59B₂O₃–1Tv₂O₃ (where Tv = Al, Y, Nd, Sm, and Eu) and three glasses of (40Bi₂O₃–60B₂O₃; 37.5Bi₂O₃–62.5B₂O₃; and 38Bi₂O₃–60B₂O₃–2Al₂O₃) compositions were extensively investigated in terms of their nuclear attenuation shielding properties, along with effective conductivity and buildup factors. The Py-MLBUF online platform was also utilized for determination of some essential parameters. Next, attenuation coefficients, along with half and tenth value layers, have been determined in the 0.015 MeV–15 MeV photon energy range. Moreover, effective atomic numbers and effective atomic weight, along with exposure and energy absorption buildup factors, were determined in the same energy range. The result showed that the type of trivalent ion has a direct effect on behaviors of bismo-borate glasses against ionizing gamma-rays. As incident photon energy increases, the effective thermal conductivity decreases rapidly, especially in the low energy range, where photoelectric effects dominate the photon–matter interaction. Sample 8 had the minimum heat conductivity at low photon energies; our findings showed that Eu-reinforced bismo-borate glass composition, namely 40Bi₂O₃–59B₂O₃–1Eu₂O₃, with a glass density of 6.328 g/cm³ had superior gamma-ray attenuation properties. These outcomes would be useful for the scientific community to observe the most suitable additive rareearth type and related glass composition for providing the aforementioned shielding properties, in terms of needs and utilization requirements.     

Detailed Inspection of γ-ray,Fast and Thermal Neutrons Shielding Competence of Calcium Oxide or Strontium Oxide Comprising Bismuth Borate Glasses

For both the B₂O₃-Bi₂O₃-CaO and B₂O₃-Bi₂O₃-SrO glass systems, γ-ray and neutron attenuation qualities were evaluated. Utilizing the Phy-X/PSD program, within the 0.015–15 MeV energy range, linear attenuation coefficients (µ) and mass attenuation coefficients (μ/ρ) were calculated, and the attained μ/ρ quantities match well with respective simulation results computed by MCNPX, Geant4, and Penelope codes. Instead of B₂O₃/CaO or B₂O₃/SrO, the Bi₂O₃ addition causes improved γ-ray shielding competence, i.e., rise in effective atomic number (Z_eff) and a fall in half-value layer (HVL), tenth-value layer (TVL), and mean free path (MFP). Exposure buildup factors (EBFs) and energy absorption buildup factors (EABFs) were derived using a geometric progression (G–P) fitting approach at 1–40 mfp penetration depths (PDs), within the 0.015–15 MeV range. Computed radiation protection efficiency (RPE) values confirm their excellent capacity for lower energy photons shielding. Comparably greater density (7.59 g/cm³), larger μ, μ/ρ, Z_eff, equivalent atomic number (Z_eq), and RPE, with the lowest HVL, TVL, MFP, EBFs, and EABFs derived for 30B₂O₃-60Bi₂O₃-10SrO (mol%) glass suggest it as an excellent γ-ray attenuator. Additionally, 30B₂O₃-60Bi₂O₃-10SrO (mol%) glass holds a commensurably bigger macroscopic removal cross-section for fast neutrons (Σ_R) (=0.1199 cm⁻¹), obtained by applying Phy-X/PSD for fast neutrons shielding, owing to the presence of larger wt% of ‘Bi’ (80.6813 wt%) and moderate ‘B’ (2.0869 wt%) elements in it. 70B₂O₃-5Bi₂O₃-25CaO (mol%) sample (B: 17.5887 wt%, Bi: 24.2855 wt%, Ca: 11.6436 wt%, and O: 46.4821 wt%) shows high potentiality for thermal or slow neutrons and intermediate energy neutrons capture or absorption due to comprised high wt% of ‘B’ element in it.     

The Role of La2O3 in Enhancement the Radiation Shielding Efficiency of the Tellurite Glasses: Monte-Carlo Simulation and Theoretical Study

The radiation shielding competence was examined for a binary glass system xLa₂O₃ + (1 − x) TeO₂ where x = 5, 7, 10, 15, and 20 mol% using MCNP-5 code. The linear attenuation coefficients (LACs) of the glasses were evaluated, and it was found that LT20 glass has the greatest LAC, while LT5 had the least LAC. The transmission factor (TF) of the glasses was evaluated against thicknesses at various selected energies and was observed to greatly decrease with increasing thickness; for example, at 1.332 MeV, the TF of the LT5 glass decreased from 0.76 to 0.25 as the thickness increased from 1 to 5 cm. The equivalent atomic number (Z_eq) of the glasses gradually increased with increasing photon energy above 0.1 MeV, with the maximum values observed at around 1 MeV. The buildup factors were determined to evaluate the accumulation of photon flux, and it was found that the maximum values for both can be seen at around 0.8 MeV. This research concluded that LT20 has the greatest potential in radiation shielding applications out of the investigated glasses due to the glass having the most desirable parameters.     

Mechanical and Gamma Ray Absorption Behavior of PbO-WO3-Na2O-MgO-B2O3 Glasses in the Low Energy Range

The Makishima and Mackenzie model has been used to determine the mechanical properties of the PbO-WO₃-Na₂O-MgO-B₂O₃ glass system. The number of bonds per unit volume of the glasses (n_b) increases from 9.40 × 10²² to 10.09 × 10²² cm⁻³ as the PbO content increases from 30 to 50 mol%. The Poisson’s ratio (σ) for the examined glasses falls between 0.174 and 0.210. The value of the fractal bond connectivity (d) for the present glasses ranges from 3.08 to 3.59. Gamma photon and fast neutron shielding parameters were evaluated via Phy-X/PSD, while that of electrons were calculated via the ESTAR platform. Analysis of the parameters showed that both photon and electron attenuation ability improve with the PbO content. The fast neutron removal cross section of the glasses varies from 0.094–0.102 cm⁻¹ as PbO molar content reduced from 50–30 mol%. Further analysis of shielding parameters of the investigated glass system showed that they possess good potential to function in radiation protection applications.     

Gamma-Ray Protection Properties of Bismuth-Silicate Glasses against Some Diagnostic Nuclear Medicine Radioisotopes: A Comprehensive Study

This study aimed to perform an investigation for the potential implementation of bismuth silicate glasses as novel shield equipment instead of ordinary shields in nuclear medicine facilities. Accordingly, a group of Bi₂O₃ reinforced silicate glass system were investigated and compared with ordinary shields in terms of their gamma-ray attenuation properties in diagnostic nuclear medicine radioisotope energies emitted from ^99mTc, ¹¹¹In, ⁶⁷Ga, ¹²³I, ¹³¹I, ^81mKr, ²⁰¹Tl, ¹³³Xe. Mass attenuation coefficient (μm)results for glass samples were calculated comparatively with the XCOM program and MCNPX code. The gamma-ray attenuation parameters such as half value layer (HVL), tenth value layer (TVL), mean free path (MFP), effective atomic number (Z_eff) were obtained in the diagnostic gamma ray energy range from 75 to 336 keV. To confirm the attenuation performance of superior sample, obtained results were extensively compared with ordinary shielding materials. According to the results obtained, BISI6 glass sample with the highest Bi₂O₃ additive has an excellent gamma-ray protection.     

Investigation of Photon Radiation Attenuation Capability of Different Clay Materials

This work aims to experimentally report the radiation attenuation factors for four different clays (red, ball, kaolin and bentonite clays) at four selected energies (emitted from Am-241, Cs-137, and Co-60). The highest relative difference in the mass attenuation coefficient (MAC) is equal to −3.02%, but most of the other results are much smaller than this value, proving that the experimental and theoretical data greatly agree with each other. From the MAC results, the shielding abilities of the clay samples at 0.060 MeV follow the order of: bentonite > red > ball > kaolin. Thus, at low energies, the bentonite clay sample provides the most effective attenuation capability out of the tested clays. The half value layer (HVL) increases as energy increases, which suggests that, only a thin clay sample is needed to sufficiently absorb the radiation at low energies, while at higher energies a thicker sample is needed to shield the same amount of high energy radiated. Furthermore, bentonite clay has the lowest HVL, while the kaolin clay has the greatest HVL at all energies. The radiation protection efficiency (RPE) values at 0.060 MeV are equal to 97.982%, 97.137%, 94.242%, and 93.583% for bentonite clay, red clay, ball clay, and kaolin clay, respectively. This reveals that at this energy, the four clay samples can absorb almost all of the incoming photons, but the bentonite clay has the greatest attenuation capability at this energy, while kaolin clay has the lowest.     

Novel HMO-Glasses with Sb2O3 and TeO2 for Nuclear Radiation Shielding Purposes: A Comparative Analysis with Traditional and Novel Shields

The radiation shielding characteristics of samples from two TeO₂ and Sb₂O₃-based basic glass groups were investigated in this research. TeO₂ and Sb₂O₃-based glasses were determined in the research as six samples with a composition of 10WO₃-(x)MoO₃-(90 − x)(TeO₂/Sb₂O₃) (x = 10, 20, 30). A general purpose MCNPX Monte Carlo code and Phy-X/PSD platform were used to estimate the radiation shielding characteristics. Accordingly, the linear and mass attenuation coefficients, half value layer, mean free path, variation of the effective atomic number with photon energy, exposure and built-up energy factors, and effective removal cross-section values were determined. It was determined that the results that were produced using the two different techniques were consistent. Based on the collected data, the most remarkable findings were found to be associated with the sample classified as T80 (10WO₃ + 10MoO₃ + 80TeO₂). The current study showed that material density was as equally important as composition in modifying radiation shielding characteristics. With the T80 sample with the greatest density (5.61 g/cm³) achieving the best results. Additionally, the acquired findings were compared to the radiation shielding characteristics of various glass and concrete materials. Increasing the quantity of MoO₃ additive, a known heavy metal oxide, in these TeO₂ and Sb₂O₃-based glasses may have a detrimental impact on the change in radiation shielding characteristics.     

Enhancement of Gamma-ray Shielding Properties in Cobalt-Doped Heavy Metal Borate Glasses: The Role of Lanthanum Oxide Reinforcement

The direct influence of La³⁺ ions on the gamma-ray shielding properties of cobalt-doped heavy metal borate glasses with the chemical formula 0.3CoO-(80-x)B₂O₃-19.7PbO-xLa₂O₃: x = 0, 0.5, 1, 1.5, and 2 mol% was examined herein. Several significant radiation shielding parameters were evaluated. The glass density was increased from 3.11 to 3.36 g/cm³ with increasing La³⁺ ion content from 0 to 2 mol%. The S5 glass sample, which contained the highest concentration of La³⁺ ions (2 mol%), had the maximum linear (μ) and mass (μ_m) attenuation coefficients for all photon energies entering, while the S1 glass sample free of La³⁺ ions possessed the minimum values of μ and μ_m. Both the half value layer (T_1/2) and tenth value layer (TVL) of all investigated glasses showed a similar trend of (T_1/2, TVL)_S1 > (T_1/2, TVL)_S2 > (T_1/2, TVL)_S3 > (T_1/2, TVL)_S4 > (T_1/2, TVL)_S5. Our results revealed that the S5 sample had the highest effective atomic number (Z_eff) values over the whole range of gamma-ray energy. S5 had the lowest exposure (EBF) and energy absorption (EABF) build-up factor values across the whole photon energy and penetration depth range. Our findings give a strong indication of the S5 sample’s superior gamma-ray shielding characteristics due to the highest contribution of lanthanum oxide.     

Physicochemical Properties and Fiber-Drawing Ability of Tellurite Glasses in the TeO2-ZnO-Y2O3 Ternary System

Glasses in the TeO₂-ZnO-Y₂O₃ (TZY) ternary system are examined in the present work. The vitrification domain of the chosen oxide matrix is determined and differential scanning calorimetry as well as X-ray diffraction measurements are carried out. The material characterizations reveal that Y₂O₃ incorporation cannot exceed 5 mol.% without causing detrimental crystallization within the glass. Optical transmission and refractive index investigations are conducted on compositions yielding fully amorphous samples. Next, the fiber drawing ability of selected yttrium-containing zinc-tellurite glasses is assessed and fiber-attenuation measurements in the mid-infrared are presented. Finally, a multimode step-index fiber is fabricated by combining a TZY cladding glass with a La₂O₃-based tellurite core glass. It is believed that yttrium-containing glasses could prove useful in association with other high glass transition temperature (>300 °C) TeO₂-based materials for the design of robust optical fibers with precisely engineered refractive index profiles.     

In-Silico Monte Carlo Simulation Trials for Investigation of V2O5 Reinforcement Effect on Ternary Zinc Borate Glasses: Nuclear Radiation Shielding Dynamics

In the current study, promising glass composites based on vanadium pentoxide (V₂O₅)-doped zinc borate (ZnB) were investigated in terms of their nuclear-radiation-shielding dynamics. The mass and linear attenuation coefficient, half-value layer, mean free path, tenth-value layer, effective atomic number, exposure-buildup factor, and energy-absorption-buildup factor were deeply simulated by using MCNPX code, Phy-X PSD code, and WinXcom to study the validation of ZBV1, ZBV2, ZBV3, and ZBV4 based on (100−x)(0.6ZnO-0.4B₂O₃)(x)(V₂O₅) (x = 1, 2, 3, 4 mol%) samples against ionizing radiation. The results showed that attenuation competencies of the studied glasses slightly changed while increasing the V₂O₅ content from 1 mol% to 4 mol%. The domination of ZnO concentration in the composition compared to B₂O₃ makes ZnO substitution with V₂O₅ more dominant, leading to a decrease in density. Since density has a significant role in the attenuation of gamma rays, a negative effect was observed. It can be concluded that the aforementioned substitution can negatively affect the shielding competencies of studied glasses.     

Guayule Natural Rubber Latex and Bi2O3 Films for X-ray Attenuating Medical Gloves

Existing natural latex radiation-attenuating gloves (RAGs) contain a high loading of radiation attenuation filler that reduces their mechanical properties to below Food and Drug Administration (FDA) medical glove requirements. RAGs are commonly formulated using Hevea natural rubber latex and lead-based fillers. The former can cause life-threatening allergic responses and the latter are known for their toxicity. In this work, a new lead-free RAG formulation based on circumallergenic guayule natural rubber latex (GNRL) and non-toxic radiation attenuation filler bismuth trioxide (Bi₂O₃) was developed. GNRL films with Bi₂O₃ loadings ranging from 0 to 300 PHR at different thicknesses were prepared. Radiation attenuation efficiencies (AE) at 60, 80, 100, and 120 kVp were determined and attenuation isocontour curves predicted film thickness and Bi₂O₃ loading required to meet or exceed the radiation attenuation requirements of ASTM D7866 and commercial RAGs. Optimal curing conditions for GNRL/Bi₂O₃ films with 150 PHR Bi₂O₃ were investigated by varying curing temperatures and time from 87 °C to 96 °C and 65 min to 90 min, respectively. In general, as the loading of the filler increased, the density of the films increased while the thickness decreased. GNRL/Bi₂O₃ films with 150 PHR Bi₂O₃ and 0.27 mm provided 5% more AE than RAG market average attenuation at the same thickness. The films with 150 PHR Bi₂O₃ cured under near-optimal conditions (90 °C/85 min, and 87 °C/65 min) met both the radiation attenuation standard (ASTM D7866) and the natural latex surgeon and examination glove standards (ASTM D3577 and D3578, respectively). Thus, gloves made using our formulations and protocols demonstrated potential to meet and surpass medical natural latex glove standards, offer a single product for both infection control and radiation protection instead of double-gloving, provide a greater degree of comfort to the user, and simultaneously reduce contact reactions and eliminate potential latex allergic reaction.