3D-perfusion analysis of burn wounds using hyperspectral imaging

BackgroundDetermination of the depth of burn wounds is still a challenge in clinical practise and fundamental for an optimal treatment. Hyperspectral imaging (HSI) has a high potential to be established as a new contact-free measuring method in medicine. From hyperspectral spectra 3D-perfusion parameters can be estimated and the microcirculatory of burn wounds over the first 72 h after thermal injury can be objectively described.MethodsWe used a hyperspectral imaging camera and extended data processing methods to calculate 3D-perfusion parameters of burn wounds from adult patients. The data processing results in the estimation of perfusion parameters like volume fraction and oxygenation of haemoglobin for 6 different layers of the injured skin. The parameters are presented as depth profiles. We analyzed and compared measurements of wounds of different degrees of damage and present the methodology and preliminary results.ResultsThe depth profiles of the perfusion parameters show characteristic features and differences depending on the degree of damage. With Hyperspectral Imaging and the advanced data processing the perfusion characteristics of burn wounds can be visualized in more detail. Based on the analysis of this perfusion characteristics, a new and better reliable classification of burn degrees can be developed supporting the surgeon in the early selection of the optimal treatment.     

Assessment of burn depth: a prospective, blinded comparison of laser Doppler imaging and videomicroscopy

INTRODUCTION AND AIMS: There is a need, both in clinical and research settings, for an affordable, objective method of assessing burn depth. This study compares burn depth assessment by videomicroscopy with laser Doppler imaging (LDI) in patients with dermal burns. The videomicroscope is inexpensive compared to LDI, and can visualise the dermal capillary structure, therefore potentially allowing objective assessment of dermal burn injuries. METHODS: Patients admitted <72 h post-injury were included in the trial. Blinded LDI and videomicroscopy assessments were carried out. The patients were then followed up to one of three end-points: primary healing without surgery; early surgery; delayed healing and subsequent split skin grafting. The incidence of infection was also noted. RESULTS: Twenty-seven burn wounds were examined. In superficial partial thickness injuries, the videomicroscope reliably demonstrated an intact or nearly intact dermal vascular structure, progressing through to large amounts of capillary destruction and haemoglobin deposition in deep partial thickness injuries and complete destruction in full thickness injuries. The videomicroscope findings correlated strongly with both those of the LDI (p<0.001) and with clinical outcome (p<0.001). DISCUSSION: The videomicroscope is capable of accurately and objectively assessing burn depth. The results correlated well with both the clinical outcome and the laser Doppler findings. In addition, videomicroscopy is significantly cheaper than LDI and avoids several of the disadvantages of LDI.     

Interobserver reliability of laser speckle contrast imaging in the assessment of burns

ObjectivesLaser speckle contrast imaging (LSCI) is an emerging technique for the assessment of burns in humans and interobserver differences have not been studied. The aim of this study was to compare assessments of perfusion images by different professional groups regarding (i) perfusion values and (ii) burn depth assessment.MethodsTwelve observers without LSCI experience were included. The observers were evenly recruited from three professional groups: plastic surgeons with experience in assessing burns, nurses with experience in treating burns, and junior doctors with limited experience of burns. Ten cases were included. Each case consisted of one digital photo of the burn with a pre-marked region of interest (ROI) and two unmarked perfusion images of the same area. The first and the second perfusion image was from 24 h and 72–96 h after injury, respectively. The perfusion values from both perfusion images were used to generate a LSCI recommendation based on the perfusion trend (the derivative between the two perfusion values). As a last step, each observer was asked to estimate the burn depth using their clinical experience and all available information. Intraclass correlation (ICC) was calculated between the different professional groups and among all observers.ResultsPerfusion values and perfusion trends between all observers had an ICC of 0.96 (95% CI 0.91–0.99). Burn depth assessment by all observers yielded an ICC of 0.53 (95% CI: 0.31–0.80) and an accuracy of 0.53 (weighted kappa). LSCI recommendations generated by all observers had an ICC of 0.95 (95% CI: 0.90–0.99).ConclusionObservers can reliably identify the same ROI, which results in observer-independent perfusion measurements, irrespective of burn experience. Extensive burn experience did not further improve burn depth assessment. The LSCI recommendation was more accurate in all professional groups. Introducing LSCI measurements would be likely improve early assessment of burns.     

Diagnosis of burn depth using laser-induced indocyanine green fluorescence: a preliminary clinical trial

Clinical assessment of burn depth is frequently inaccurate. In order to effectively plan the treatment of burn wounds, an accurate diagnosis of burn depth is desirable. A new method for evaluating the depth of burns by imaging the blood flow through the burned tissue using fluorescence from intravenously injected indocyanine green (ICG) dye illuminated with a 785-nm, near-infrared diode laser array was evaluated. Nine patients and 15 individual burn sites were studied. Five sites were classified by the ICG study as superficial second degree, four were deep-dermal second degree, and six were third degree. Etiology of the injuries included flame, contact burns, and scalds. The date postburn of the study ranged from 1 to 11 days. In all cases, the relative fluorescence levels (e.g. superficial second-degree burns yielded relatively bright fluorescence, third-degree burns appeared much darker than surrounding normal skin) were found to correlate well with actual burn depth as determined by histologic examination of biopsies and intraoperative clinical assessment.     

Assessment of burn depth and burn wound healing potential

The depth of a burn wound and/or its healing potential are the most important determinants of the therapeutic management and of the residual morbidity or scarring. Traditionally, burn surgeons divide burns into superficial which heal by rapid re-epithelialization with minimal scarring and deep burns requiring surgical therapy. Clinical assessment remains the most frequent technique to measure the depth of a burn wound although this has been shown to be accurate in only 60-75% of the cases, even when carried out by an experienced burn surgeon. In this article we review all current modalities useful to provide an objective assessment of the burn wound depth, from simple clinical evaluation to biopsy and histology and to various perfusion measurement techniques such as thermography, vital dyes, video angiography, video microscopy, and laser Doppler techniques. The different needs according to the different diagnostic situations are considered. It is concluded that for the initial emergency assessment, the use of telemetry and simple burn photographs are the best option, that for research purposes a wide range of different techniques can be used but that, most importantly, for the actual treatment decisions, laser Doppler imaging is the only technique that has been shown to accurately predict wound outcome with a large weight of evidence. Moreover this technique has been approved for burn depth assessment by regulatory bodies including the FDA.     

Spectrophotometric intracutaneous analysis: a novel imaging technique in the assessment of acute burn depth

The noncontact spectrophotometric intracutaneous analysis scope (SIAscope) is a novel portable imaging device that rapidly produces images of the blood and melanin content of large areas of skin. The estimation of burn depth is often difficult in the clinical setting, and this pilot study was conducted to assess the potential for the SIAscope in aiding burn assessment. Nine patients with a variety of burn injuries had images taken of their acute burns within 48 hours of injury, both with a noncontact SIAscope and a laser Doppler perfusion imaging system (LDPI). Results showed that superficial partial thickness burns had increased hemoglobin and loss of melanin on SIAgraphs, whereas deep partial thickness burns had more pronounced hemoglobin concentrations and apparent melanin increases, helping to differentiate these 2 burn types. The SIAscope, a relatively inexpensive, portable device, has the potential to be a highly useful clinical adjunct in the bedside estimation of acute burn depth.     

Debridement of burn wounds with a water jet surgical tool

A new instrument, the Versajet system, based on fluid jet technology has recently been advocated as an alternative to standard surgical excisional technique for burn wounds. In this paper we describe our experience with this tool, the technique employed as well as its clinical feasability for debriding partial thickness burn wounds. Seventeen patients were evaluated for clinical efficacy of debridement of their burn wounds using the Versajet system. Burn wound areas of between 0.5 and 5% total body surface (TBSA) involving the face, arm, hand, leg and foot underwent debridement using the Versajet system. The Versajet system was able to sufficiently debride superficial partial thickness and mid-dermal partial thickness wounds for subsequent placement of Biobrane. Deeper partial thickness wounds could be excised for successful autografting. The Versajet system demonstrated some particular advantage in the surgical treatment of superficial to mid-partial thickness burns in areas like the face, hand and foot which can often be difficult to reach and contour with conventional modalities.     

Cutaneous microcirculatory assessment of the burn wound is associated with depth of injury and predicts healing time

Rationale

Current trends for the treatment of deep partial thickness and full-thickness burns include early excision and skin grafting. In this study we retrospectively evaluated the ability of Laser Doppler Flowmetry (LDF), taken within 24 h of the burn to predict: (1) burn wound depth and (2) wounds which would heal in less than 21 days.

Method

The Laser Doppler Flowmeter (O2C, LEA Medizintechnik, Germany) was employed to non-invasively measure the cutaneous microcirculation of 173 selected areas on 28 patients who suffered burns.

Results

A distinct association between initial flow (<24 h after burn injury) and the clinical assessment of depth of burn wounds was observed. Wounds demonstrating an initial blood flow of >100 AU were, in 93.1% of cases, correctly (positively) predicted for spontaneous healing within 21 days. A blood flow of <100 AU (negatively) predicted in 88.2%, those wounds which would not go on to heal within 21 days. Sequential measurement analysis (<24 h, 3 days after injury and 6 days after injury) revealed no significant decrease in skin perfusion velocity or flow rate.

Conclusion

LDF can provide immediate results for early determination of burn wound depth and is useful in selecting patients for conservative treatment of their burn wounds.     

Dual-imaging system for burn depth diagnosis

Currently, determination of burn depth and healing outcomes has been limited to subjective assessment or a single modality, e.g., laser Doppler imaging. Such measures have proven less than ideal. Recent developments in other non-contact technologies such as optical coherence tomography (OCT) and pulse speckle imaging (PSI) offer the promise that an intelligent fusion of information across these modalities can improve visualization of burn regions thereby increasing the sensitivity of the diagnosis. In this work, we combined OCT and PSI images to classify the degree of burn (superficial, partial-thickness and full-thickness burns). Algorithms were developed to integrate and visualize skin structure (with and without burns) from the two modalities. We have completed the proposed initiatives by employing a porcine burn model and compiled results that attest to the utility of our proposed dual-modal fusion approach. Computer-derived data indicating the varying burn depths were validated through immunohistochemical analysis performed on burned skin tissue. The combined performance of OCT and PSI modalities provided an overall ROC-AUC = 0.87 (significant at p < 0.001) in classifying different burn types measured after 1-h of creating the burn wounds. Porcine model studies to assess feasibility of this dual-imaging system for wound tracking are underway.     

Classification of burn injury using Raman spectroscopy and optical coherence tomography: An ex-vivo study on porcine skin

Accurate depth assessment of burn wounds is a critical task to provide the right treatment and care. Currently, laser Doppler imaging is able to provide better accuracy compared to the standard clinical evaluation. However, its clinical applicability is limited by factors like scanning distance, time, and cost. Precise diagnosis of burns requires adequate structural and functional details. In this work, we evaluated the combined potential of two non-invasive optical modalities, optical coherence tomography (OCT) and Raman spectroscopy (RS), to identify degrees of burn wounds (superficial partial-thickness (SPT), deep partial-thickness (DPT), and full-thickness (FT)). OCT provides morphological information, whereas, RS provides biochemical aspects. OCT images and Raman spectra were obtained from burns created on ex-vivo porcine skin. Algorithms were developed to segment skin region and extract textural features from OCT images, and derive spectral wave features from RS. These computed features were fed into machine learning classifiers for categorization of burns. Histological results obtained from trichrome staining were used as ground-truth. The combined performance of RS-OCT reported an overall average accuracy of 85% and ROC-AUC = 0.94, in distinguishing the burn wounds. The significant performance on ex vivo skin motivates to assess the feasibility of combined RS-OCT in in vivo models.     

Accuracy of early burn depth assessment by laser Doppler imaging on different days post burn

Background

Accurate diagnosis of burn depth is essential in selecting the most appropriate treatment. Early assessment of burn depth by clinical means only has been shown to be inaccurate, resulting in unnecessary operations or delay of grafting procedures. Laser Doppler imaging (LDI) was reported as an objective technique to determine the depth of a burn wound, but the accuracy on very early days post burn has never been investigated yet.

Methods

In 40 patients with intermediate depth burns, we prospectively evaluated and compared the accuracy of the LDI measurements with the clinical assessments on days 0, 1, 3, 5, 8. Clinical evaluation of the depth of the burn was performed by two observers blinded to the LDI images. Accuracies were assessed by comparison with outcome: healing times longer than 21 days were considered to be equivalent to a biopsy finding of a deep dermal wound. Obviously superficial and full thickness wounds were excluded. LDI flux level was used for LDI prediction of outcome: less than 220 PU to predict non-healing at day 21.

Results

The accuracies of burn depth assessments on the day of burn and post burn days 0, 1, 3, 5 and 8 using LDI were 54%, 79.5%, 95%, 97% and 100% compared with clinical assessment accuracies of 40.6%, 61.5%, 52.5%, 71.4% and 100%, respectively. LDI accuracy was significantly higher than clinical accuracy on day 3 (p < 0.001) and day 5 (p = 0.005). Burn depth conversion was also considered. This is the first study to quantify the advantage of LDI scanning over clinical assessments during these important early after burn days.     

A pilot evaluation study of high resolution digital thermal imaging in the assessment of burn depth

Thermal imaging is a tool that can be used to determine burn depth. We have revisited the use of this technology in the assessment of burns and aim to establish if high resolution, real-time technology can be practically used in conjunction with clinical examination to determine burn depth. 11 patients with burns affecting upper and lower limbs and the anterior and posterior trunk were included in this study. Digital and thermal images were recorded at between 42 h and 5 days post burn. When compared to skin temperature, full thickness burns were significantly cooler (p < 0.001), as were deep partial thickness burns (p < 0.05). Superficial partial thickness burns were not significantly different in temperature than non-burnt skin (p > 0.05). Typically, full thickness burns were 2.3 °C cooler than non-burnt skin; deep partial thickness burns were 1.2 °C cooler than non-burnt skin; whilst superficial burns were only 0.1 °C cooler. Thermal imaging can correctly determine difference in burn depth. The thermal camera produces images of high resolution and is quick and easy to use.     

Burn imaging with a whole field laser Doppler perfusion imager based on a CMOS imaging array

Laser Doppler perfusion imaging (LDPI) has been proven to be a useful tool in predicting the burn wound outcome in an early stage. A major disadvantage of scanning beam LDPI devices is their slow scanning speed, leading to patient discomfort and imaging artifacts. We have developed the Twente Optical Perfusion Camera (TOPCam), a whole field laser Doppler perfusion imager based on a CMOS imaging array, which is two orders of magnitude faster than scanning beam LDPI systems. In this paper the first clinical results of the TOPCam in the setting of a burn centre are presented. The paper shows perfusion images of burns of various degrees. While our system encounters problems caused by blisters, tissue necrosis, surface reflection and curvature in a manner similar to scanning beam imagers, it poses a clear advantage in terms of procedure time. Image quality in terms of dynamic range and resolution appears to be sufficient for burn diagnosis. Hence, we made important steps in overcoming the limitations of LDPI in burn diagnosis imposed by the measurement speed.     

Burn depths evaluation based on active dynamic IR thermal imaging--a preliminary study

Proper diagnostic assessment of burn wound depth is of the highest importance in selecting the mode of burn wound treatment. Several diagnostic methods--clinical and histopathological evaluation, as well as methods employing IR imaging--static thermography and active dynamic thermography (ADT)--are compared on the basis of in vivo experiments conducted on three domestic pigs (23 burn wounds). ADT is presented here as a new, reliable and quantitative method of assessing burn wound depth on the basis of discrimination of the thermal properties of burnt tissue. In the case of ADT registration of thermal images was performed following thermal pulse excitation. A series of captured infrared images was used as the basis for calculating the thermal time constant tau for each pixel. The parameter values were compared with histopathological and clinical assessments of burn depth. The mean value of tau was found for burns, which heal within 3 weeks (tau=12.08+/-1.94s) and for burns, which did not heal during this period (tau=9.07+/-0.68s), p<0.05. The accuracy, sensitivity and specificity of all the methods tested were compared, the best results coming from ADT. The ADT method is fast, non-invasive and relatively inexpensive, although it still requires further animal experimentation as well as clinical study to confirm the results.     

Burn wound depth assessment – is laser Doppler imaging the best measurement tool available?

Accurate early assessment of burn wound depth is increasingly important in clinical decision-making. Clinimetric principles are absolutely mandatory while developing a new test or tool for use in the clinical setting. This article critically evaluates the clinimetrics of a powerful tool for assessment of burn depth and whether Laser Doppler Imaging can meet those criteria by virtue of differentiation between superficial and deep burns.     

Clinical utilization of near-infrared spectroscopy devices for burn depth assessment

The diagnosis of burn depth is based on a visual assessment and can be subjective. Near-infrared (NIR) spectroscopic devices were used preclinically with positive results. The purpose of this study was to test the devices in a clinical setting using easily identifiable burn wounds. Adult patients with acute superficial and full-thickness burns were enrolled. NIR point spectroscopy and imaging devices were used to collect hemodynamic data from the burn site and an adjacent unburned control site. Oxy-hemoglobin and deoxy-hemoglobin concentrations were extracted from spectroscopic data and reported as oxygen saturation and total hemoglobin. Sixteen patients (n=16) were included in the study with equal numbers in both burn wound groups. Point spectroscopy data showed an increase in oxygen saturation (p<0.0095) and total hemoglobin (<0.0001) in comparison with the respective control areas for superficial burn wounds. The opposite was true for full-thickness burns, which showed a decrease in oxygenation (p<0.0001) and total hemoglobin (p<0.0147) in comparison with control areas. NIR imaging technology provides an estimate of hemodynamic parameters and could easily distinguish superficial and full-thickness burn wounds. These results confirm that NIR devices can successfully distinguish superficial and full-thickness burn injuries.     

一种大鼠蒸气烫伤模型的建立

目的　建立一种可控深度及面积的大鼠烫伤模型。　方法　用高压蒸气消毒锅及自制烫伤支架制作高压蒸气烫伤装置 ,用压力为 0 .12MPa(1MPa=75 0 0mmHg)、直径 2 .6cm的致伤孔上分别在大鼠背部烫 3、4、5、6、7、8、9、10s,每时相点 5个创面。伤后 2 4h取标本行组织学观察 ,用Photoshop软件测量烫伤深度 ,并观察有无毛囊、汗腺附件受损、烫伤区被毛生长及创面愈合情况。　结果　烫伤深度与烫伤时间的变化呈正相关 (r =0.99)。浅Ⅱ、深Ⅱ、Ⅲ度烫伤模型的致伤时间分别为 3、5、7s。烫伤 7～ 10s创面深度虽逐渐加重 ,愈合时间却相近。　结论　该模型可以控制烫伤深度、面积 ,烧伤深度划分准确且操作简便 ,是研究创伤修复机制及评价创面用药的较好模型。     

Short‐wave infrared light imaging measures tissue moisture and distinguishes superficial from deep burns

Existing clinical approaches and tools to measure burn tissue destruction are limited resulting in misdiagnosis of injury depth in over 40% of cases. Thus, our objective in this study was to characterize the ability of short‐wave infrared (SWIR) imaging to detect moisture levels as a surrogate for tissue viability with resolution to differentiate between burns of various depths. To accomplish our aim, we constructed an imaging system consisting of a broad‐band Tungsten light source; 1,200‐, 1,650‐, 1,940‐, and 2,250‐nm wavelength filters; and a specialized SWIR camera. We initially used agar slabs to provide a baseline spectrum for SWIR light imaging and demonstrated the differential absorbance at the multiple wavelengths, with 1,940 nm being the highest absorbed wavelength. These spectral bands were then demonstrated to detect levels of moisture in inorganic and in vivo mice models. The multiwavelength SWIR imaging approach was used to diagnose depth of burns using an in vivo porcine burn model. Healthy and injured skin regions were imaged 72 hours after short (20 seconds) and long (60 seconds) burn application, and biopsies were extracted from those regions for histologic analysis. Burn depth analysis based on collagen coagulation histology confirmed the formation of superficial and deep burns. SWIR multispectral reflectance imaging showed enhanced intensity levels in long burned regions, which correlated with histology and distinguished between superficial and deep burns. This SWIR imaging method represents a novel, real‐time method to objectively distinguishing superficial from deep burns.     

A retrospective analysis of ambulatory burn patients: focus on wound dressings and healing times

INTRODUCTION

In this study, we retrospectively analysed healing times of ambulatory burn patients after silver-based dressings were introduced in late December 2005, and compared the results with those obtained before.

PATIENTS AND METHODS

Data were collected in November–December 2005 and in January–February 2006. We excluded from the study: (i) admitted patients; (ii) patients with mixed superficial partial thickness and deep partial thickness burns; (iii) patients with full-thickness burns; and (iv) operated patients that came for follow-up. We recorded the age, sex, cause (flame vs scald), burn depth, dressings used and healing times.

RESULTS

We selected 347 patients corresponding to 455 burned areas (64.4% superficial and 35.6% deep; 47.7% treated in 2005 and 52.3% in 2006). During the years 2005 and 2006, there was an increase in the use of silver-based dressings (2005, 9.7%; 2006, 38.7%; chi-squared test, P < 0.001) and a decrease in the use of paraffin gauzes (2005, 66.4%; 2006, 40.3%; chi-squared test, P < 0.001). The healing time of overall burns and of superficial burns showed no significant differences between 2005 and 2006. However, in deep partial thickness burns, a significant reduction was present (2006, 19; 2005, 29 days; Student''s t-test, P < 0.01). Among all dressings, paraffin gauzes had the shortest healing times in superficial burns (5 days); with silver-based dressings in deep burns, the healing times were nanocrystalline silver (16 days) and silver carboxymethylcellulose (21 days).

CONCLUSIONS

Results of our retrospective study would suggest that paraffin gauzes are a valuable option in superficial burns, while silver-based dressings are preferable in deep burns.     

Assessing multimodal optical imaging of perfusion in burn wounds

A critical need exists for early, accurate diagnosis of burn wound severity to help identify the course of treatment and outcome of the wound. Laser speckle imaging (LSI) is a promising blood perfusion imaging approach, but it does not account for changes in tissue optical properties that can occur with burn wounds, which are highly dynamic environments. Here, we studied optical property dynamics following burn injury and debridement and the associated impact on interpretation of LSI measurements of skin perfusion. We used spatial frequency domain imaging (SFDI) measurements of tissue optical properties to study the impact of burn-induced changes in these properties on LSI measurements. An established preclinical porcine model of burn injury was used (n = 8). SFDI and LSI data were collected from burn wounds of varying severity. SFDI measurements demonstrate that optical properties change in response to burn injury in a porcine model. We then apply theoretical modeling to demonstrate that the measured range of optical property changes can affect the interpretation of LSI measurements of blood flow, but this effect is minimal for most of the measured data. Collectively, our results indicate that, even with a dynamic burn wound environment, blood-flow measurements with LSI can serve as an appropriate strategy for accurate assessment of burn severity.