Improved fat suppression using multipeak reconstruction for IDEAL chemical shift fat‐water separation: Application with fast spin echo imaging

Purpose

To evaluate and quantify improvements in the quality of fat suppression for fast spin‐echo imaging of the knee using multipeak fat spectral modeling and IDEAL fat‐water separation.

Materials and Methods

T₁‐weighted and T₂‐weighted fast spin‐echo sequences with IDEAL fat‐water separation and two frequency‐selective fat‐saturation methods (fat‐selective saturation and fat‐selective partial inversion) were performed on 10 knees of five asymptomatic volunteers. The IDEAL images were reconstructed using a conventional single‐peak method and precalibrated and self‐calibrated multipeak methods that more accurately model the NMR spectrum of fat. The signal‐to‐noise ratio (SNR) was measured in various tissues for all sequences. Student t‐tests were used to compare SNR values.

Results

Precalibrated and self‐calibrated multipeak IDEAL had significantly greater suppression of signal (P < 0.05) within subcutaneous fat and bone marrow than fat‐selective saturation, fat‐selective partial inversion, and single‐peak IDEAL for both T₁‐weighted and T₂‐weighted fast spin‐echo sequences. For T₁‐weighted fast spin‐echo sequences, the improvement in the suppression of signal within subcutaneous fat and bone marrow for multipeak IDEAL ranged between 65% when compared to fat‐selective partial inversion to 86% when compared to fat‐selectivesaturation. For T2‐weighted fast spin‐echo sequences, the improvement for multipeak IDEAL ranged between 21% when compared to fat‐selective partial inversion to 81% when compared to fat‐selective saturation.

Conclusion

Multipeak IDEAL fat‐water separation provides improved fat suppression for T₁‐weighted and T₂‐weighted fast spin‐echo imaging of the knee when compared to single‐peak IDEAL and two widely used frequency‐selected fat‐saturation methods. J. Magn. Reson. Imaging 2009;29:436–442. © 2009 Wiley‐Liss, Inc.     

Noise analysis for 3‐point chemical shift‐based water‐fat separation with spectral modeling of fat

Purpose:

To model the theoretical signal‐to‐noise ratio (SNR) behavior of 3‐point chemical shift‐based water‐fat separation, using spectral modeling of fat, with experimental validation for spin‐echo and gradient‐echo imaging. The echo combination that achieves the best SNR performance for a given spectral model of fat was also investigated.

Materials and Methods:

Cramér‐Rao bound analysis was used to calculate the best possible SNR performance for a given echo combination. Experimental validation in a fat‐water phantom was performed and compared with theory. In vivo scans were performed to compare fat separation with and with out spectral modeling of fat.

Results:

Theoretical SNR calculations for methods that include spectral modeling of fat agree closely with experimental SNR measurements. Spectral modeling of fat more accurately separates fat and water signals, with only a slight decrease in the SNR performance of the water‐only image, although with a relatively large decrease in the fat SNR performance.

Conclusion:

The optimal echo combination that provides the best SNR performance for water using spectral modeling of fat is very similar to previous optimizations that modeled fat as a single peak. Therefore, the optimal echo spacing commonly used for single fat peak models is adequate for most applications that use spectral modeling of fat. J. Magn. Reson. Imaging 2010;32:493–500. © 2010 Wiley‐Liss, Inc.     

High-resolution proton density weighted three-dimensional fast spin echo (3D-FSE) of the knee with IDEAL at 1.5 Tesla: comparison with 3D-FSE and 2D-FSE--initial experience

Purpose:

To assess the feasibility of combining three‐dimensional fast spin echo (3D‐FSE) and Iterative‐decomposition‐of water‐and‐fat‐with‐echo asymmetry‐and‐least‐squares‐estimation (IDEAL) at 1.5 Tesla (T), generating a high‐resolution 3D isotropic proton density‐weighted image set with and without “fat‐suppression” (FS) in a single acquisition, and to compare with 2D‐FSE and 3D‐FSE (without IDEAL).

Materials and Methods:

Ten asymptomatic volunteers prospectively underwent sagittal 3D‐FSE‐IDEAL, 3D‐FSE, and 2D‐FSE sequences at 1.5T (slice thickness [ST]: 0.8 mm, 0.8 mm, and 3.5 mm, respectively). 3D‐FSE and 2D‐FSE were repeated with frequency‐selective FS. Fluid, cartilage, and muscle signal‐to‐noise ratio (SNR) and fluid‐cartilage contrast‐to‐noise ratio (CNR) were compared among sequences. Three blinded reviewers independently scored quality of menisci/cartilage depiction for all sequences. “Fat‐suppression” was qualitatively scored and compared among sequences.

Results:

3D‐FSE‐IDEAL fluid‐cartilage CNR was higher than in 2D‐FSE (P < 0.05), not different from 3D‐FSE (P = 0.31). There was no significant difference in fluid SNR among sequences. 2D‐FSE cartilage SNR was higher than in 3D FSE‐IDEAL (P < 0.05), not different to 3D‐FSE (P = 0.059). 2D‐FSE muscle SNR was higher than in 3D‐FSE‐IDEAL (P < 0.05) and 3D‐FSE (P < 0.05). Good or excellent depiction of menisci/cartilage was achieved using 3D‐FSE‐IDEAL in the acquired sagittal and reformatted planes. Excellent, homogeneous “fat‐suppression” was achieved using 3D‐FSE‐IDEAL, superior to FS‐3D‐FSE and FS‐2D‐FSE (P < 0.05).

Conclusion:

3D FSE‐IDEAL is a feasible approach to acquire multiplanar images of diagnostic quality, both with and without homogeneous “fat‐suppression” from a single acquisition. J. Magn. Reson. Imaging 2012;361‐369. © 2011 Wiley Periodicals, Inc.     

T2‐weighted 3D fast spin echo imaging with water–fat separation in a single acquisition

Purpose:

To develop a robust 3D fast spin echo (FSE) T₂‐weighted imaging method with uniform water and fat separation in a single acquisition, amenable to high‐quality multiplanar reformations.

Materials and Methods:

The Iterative Decomposition of water and fat with Echo Asymmetry and Least squares estimation (IDEAL) method was integrated with modulated refocusing flip angle 3D‐FSE. Echoes required for IDEAL processing were acquired by shifting the readout gradient with respect to the Carr‐Purcell‐Meiboom‐Gill echo. To reduce the scan time, an alternative data acquisition using two gradient echoes per repetition was implemented. Using the latter approach, a total of four gradient echoes were acquired in two repetitions and used in the modified IDEAL reconstruction.

Results:

3D‐FSE T₂‐weighted images with uniform water–fat separation were successfully acquired in various anatomies including breast, abdomen, knee, and ankle in clinically feasible scan times, ranging from 5:30–8:30 minutes. Using water‐only and fat‐only images, in‐phase and out‐of‐phase images were reconstructed.

Conclusion:

3D‐FSE‐IDEAL provides volumetric T₂‐weighted images with uniform water and fat separation in a single acquisition. High‐resolution images with multiple contrasts can be reformatted to any orientation from a single acquisition. This could potentially replace 2D‐FSE acquisitions with and without fat suppression and in multiple planes, thus improving overall imaging efficiency. J. Magn. Reson. Imaging 2010;32:745–751. © 2010 Wiley‐Liss, Inc.     

Quantification of hepatic macrosteatosis in living,related liver donors using T1‐independent,T2*‐corrected chemical shift MRI

Purpose:

To evaluate the diagnostic implications of the iterative decomposition of water and fat using echo‐asymmetry and the least‐squares estimation (IDEAL) technique to detect hepatic steatosis (HS) in potential liver donors using histopathology as the reference standard.

Materials and Methods:

Forty‐nine potential liver donors (32 male, 17 female; mean age, 31.7 years) were included. All patients were imaged using the in‐ and out‐of‐phase (IOP) gradient‐echo (GRE) and IDEAL techniques on a 1.5 T MR scanner. To estimate the hepatic fat fraction (FF), two reviewers performed regions‐of‐interest measurement in 15 areas of the liver seen on the IOP images and on the IDEAL‐FF images. The magnetic resonance imaging (MRI) and pathology values of macrosteatosis were correlated using the Pearson correlation coefficient. We analyzed the diagnostic performance of IOP imaging and IDEAL for detecting HS.

Results:

The results of the hepatic‐FF estimated on IDEAL were well correlated with the histologic degree of macrosteatosis (γ = 0.902, P < 0.001). IDEAL showed 100% sensitivity and 91% specificity for detecting HS, and IOP imaging showed 87.5% sensitivity and 97% specificity, respectively.

Conclusion:

IDEAL is a useful tool for the preoperative diagnosis of HS in potential living liver donors; it can also help to avoid unnecessary biopsies in these patients. J. Magn. Reson. Imaging 2012;36:1124–1130. © 2012 Wiley Periodicals, Inc.     

Liver methylene fraction by dual- and triple-echo gradient-echo imaging at 3.0T: Correlation with proton MR spectroscopy and estimation of robustness after SPIO administration

Purpose

To assess the systematic errors in liver methylene fraction (LMF) resulting from fat–fat interference effects with dual‐ and triple‐echo gradient‐recalled‐echo Dual/Triple GRE) sequences and to test the robustness of these sequences after iron overloading.

Materials and Methods

Forty type‐2 diabetic patients underwent LMF measurement by 3.0T ¹H magnetic resonance spectroscopy (corrected for T1 and T2 decays) as the reference standard and liver fat fraction (%Fat) measurement by four Dual/Triple GRE sequences with 20° and 60° flip angle (α), corrected for T1 recovery. The same four sequences were repeated in eight patients after ferumoxide injection. Corrections for systematic errors were determined from the linear regressions (spectroscopy LMF values over Dual/Triple GRE %Fat values). Robustness was tested using Wilcoxon's signed‐rank test.

Results

Fat–fat interference effects produced a ～10% relative systematic error and T2* decay produced a 1.9%–4.2% absolute systematic error in LMF. When comparing before and after ferumoxide, dual‐echo imaging with α = 20° and α = 60°, even when corrected, showed absolute differences of 7.23% [2.81%–10.25%] (P = 0.0117) and 5.65% [1.89%–8.216.8%] (P = 0.0117), respectively; compared to only 1.17% [0.08%–2.83%] (P = 0.0251) and 1.15% [0.37%–2.73%] (P = 0.2626) with triple‐echo imaging and α = 20° and α = 60°, respectively.

Conclusion

Triple‐echo imaging with α = 60° corrected for both T1 recovery and fat–fat interference effects is robust after superparamagnetic iron oxide (SPIO) administration and can reliably quantify LMF. J. Magn. Reson. Imaging 2011;33:119–127. © 2010 Wiley‐Liss, Inc.     

Improved time‐of‐flight magnetic resonance angiography with IDEAL water‐fat separation

Purpose

To implement IDEAL (iterative decomposition of water and fat using echo asymmetry and least squares estimation) water‐fat separation with 3D time‐of‐flight (TOF) magnetic resonance angiography (MRA) of intracranial vessels for improved background suppression by providing uniform and robust separation of fat signal that appears bright on conventional TOF‐MRA.

Materials and Methods

IDEAL TOF‐MRA and conventional TOF‐MRA were performed in volunteers and patients undergoing routine brain MRI/MRA on a 3T magnet. Images were reviewed by two radiologists and graded based on vessel visibility and image quality.

Results

IDEAL TOF‐MRA demonstrated statistically significant improvement in vessel visibility when compared to conventional TOF‐MRA in both volunteer and clinical patients using an image quality grading system. Overall image quality was 3.87 (out of 4) for IDEAL versus 3.55 for conventional TOF imaging (P = 0.02). Visualization of the ophthalmic artery was 3.53 for IDEAL versus 1.97 for conventional TOF imaging (P < 0.00005) and visualization of the superficial temporal artery was 3.92 for IDEAL imaging versus 1.97 for conventional TOF imaging (P < 0.00005).

Conclusion

By providing uniform suppression of fat, IDEAL TOF‐MRA provides improved background suppression with improved image quality when compared to conventional TOF‐MRA methods. J. Magn. Reson. Imaging 2009;29:1367–1374. © 2009 Wiley‐Liss, Inc.     

Articular cartilage of the knee: rapid three-dimensional MR imaging at 3.0 T with IDEAL balanced steady-state free precession--initial experience

Institutional review board approval and informed consent were obtained for this HIPAA-compliant study. In this study, iterative decomposition of water and fat with echo asymmetry and least-squares estimation (IDEAL) balanced steady-state free precession (bSSFP), fat-suppressed bSSFP, and fat-suppressed spoiled gradient-echo (GRE) sequences for 3.0-T magnetic resonance (MR) imaging of articular knee cartilage were prospectively compared in five healthy volunteers. Cartilage and fluid signal-to-noise ratio (SNR), cartilage-fluid contrast-to-noise ratio (CNR), SNR efficiency, CNR efficiency, image quality, and fat suppression were compared. Fat-suppressed bSSFP and IDEAL bSSFP had higher SNR efficiency of cartilage (P < .01) than did GRE. IDEAL bSSFP had higher cartilage-fluid CNR efficiency than did fat-suppressed bSSFP or GRE (P < .01). Fat-suppressed bSSFP and IDEAL bSSFP had higher image quality than did GRE (P < .01). GRE and IDEAL bSSFP had significantly better fat-water separation or fat saturation than did fat-suppressed bSSFP (P < .05). IDEAL bSSFP is a promising method for imaging articular knee cartilage.     

k‐space water‐fat decomposition with T2* estimation and multifrequency fat spectrum modeling for ultrashort echo time imaging

Purpose:

To demonstrate the feasibility of combining a chemical shift‐based water‐fat separation method (IDEAL) with a 2D ultrashort echo time (UTE) sequence for imaging and quantification of the short T₂ tissues with robust fat suppression.

Materials and Methods:

A 2D multislice UTE data acquisition scheme was combined with IDEAL processing, including T₂* estimation, chemical shift artifacts correction, and multifrequency modeling of the fat spectrum to image short T₂ tissues such as the Achilles tendon and meniscus both in vitro and in vivo. The integration of an advanced field map estimation technique into this combined method, such as region growing (RG), is also investigated.

Results:

The combination of IDEAL with UTE imaging is feasible and excellent water‐fat separation can be achieved for the Achilles tendon and meniscus with simultaneous T₂* estimation and chemical shift artifact correction. Multifrequency modeling of the fat spectrum yields more complete water‐fat separation with more accurate correction for chemical shift artifacts. The RG scheme helps to avoid water‐fat swapping.

Conclusion:

The combination of UTE data acquisition with IDEAL has potential applications in imaging and quantifying short T₂ tissues, eliminating the necessity for fat suppression pulses that may directly suppress the short T₂ signals. J. Magn. Reson. Imaging 2010;31:1027–1034. ©2010 Wiley‐Liss, Inc.     

Iterative decomposition of water and fat with echo asymmetry and least‐squares estimation (IDEAL) of the wrist and finger at 3T: Comparison with chemical shift selective fat suppression images

Purpose:

To compare fat‐suppressed magnetic resonance imaging (MRI) quality using iterative decomposition of water and fat with echo asymmetry and least‐squares estimation (IDEAL) with that using chemical shift selective fat‐suppressed T1‐weighted spin‐echo (CHESS) images for evaluating rheumatoid arthritis (RA) lesions of the hand and finger at 3T.

Materials and Methods:

MRI was performed in eight healthy volunteers and eight RA patients with a 3.0T MR system (Signa HDxt GE healthcare) using an eight‐channel knee coil. FS‐CHESS‐T1‐SE and IDEAL imaging were acquired in the coronal planes covering the entire structure of the bilateral hands with a slice thickness of 2 mm. In the RA patients both images were obtained after intravenous gadolinium administration. Image quality was evaluated on a five‐point scale (1 = excellent to 5 = very poor). Synovitis and bone marrow contrast uptake on MR images were reviewed by two musculoskeletal radiologists using the Rheumatoid Arthritis MRI Scoring System (RAMRIS) of the Outcome Measures in Rheumatoid Arthritis Clinical Trials (OMERACT) group.

Results:

IDEAL showed uniform FS unaffected by magnetic field inhomogeneity and challenging geometry of hand and fingers, while CHESS‐T1‐SE often showed FS failure within the first metacarpal joint, tip of the finger, and ulnar aspect of the wrist joint. Overall image quality was significantly better with IDEAL than CHESS‐T1‐SE images (4.43 vs. 3.43, P < 0.01). Interobserver agreement (κ value) for synovitis and bone marrow contrast uptake was good to excellent with IDEAL (0.74–0.91, 0.62–0.89, respectively).

Conclusion:

IDEAL could compensate for the effects of field inhomogeneities, providing uniform FS of the hand and finger than did the CHESS‐T1‐SE sequence. J. Magn. Reson. Imaging 2013;37:733–738. © 2012 Wiley Periodicals, Inc.     

Fat-water separation in dynamic objects using an UNFOLD-like temporal processing

Purpose

To separate fat and water signals in dynamic imaging. Because important features may be embedded in fat, and because fat may take part in disease processes, separating fat and water signals may be of great importance in a number of clinical applications. This work aims to achieve such separation at nearly no loss in temporal resolution compared to usual, nonseparated acquisitions. In contrast, the well‐known 3‐point Dixon method may cause as much as a 3‐fold reduction in temporal resolution.

Materials and Methods

The proposed approach involves modulating the echo time TE from frame to frame, to force fat signals to behave in a conspicuous manner through time, so they can be readily identified and separated from water signals. The strategy is inspired from the “unaliasing by Fourier encoding the overlaps in the temporal direction” (UNFOLD) method, although UNFOLD involves changes in the sampling function rather than TE, and aims at suppressing aliased material rather than fat.

Results

The method was implemented at 1.5 T and 3 T, on cardiac cine and multiframe steady‐state free precession sequences. In addition to phantom results, in vivo results from volunteers are presented.

Conclusion

Good separation of fat and water signals was achieved in all cases. J. Magn. Reson. Imaging 2010;32:962–970. © 2010 Wiley‐Liss, Inc.     

MR Imaging of the Spine at 3.0T with T2-Weighted IDEAL Fast Recovery Fast Spin-Echo Technique

Objective

To compare the iterative decomposition of water and fat with echo asymmetry and the least-squares estimation (IDEAL) method with a fat-saturated T2-weighted (T2W) fast recovery fast spin-echo (FRFSE) imaging of the spine.

Materials and Methods

Images acquired at 3.0 Tesla (T) in 35 patients with different spine lesions using fat-saturated T2W FRFSE imaging were compared with T2W IDEAL FRFSE images. Signal-to-noise ratio (SNR)-efficiencies measurements were made in the vertebral bodies and spinal cord in the mid-sagittal plane or nearest to the mid-sagittal plane. Images were scored with the consensus of two experienced radiologists on a four-point grading scale for fat suppression and overall image quality. Statistical analysis of SNR-efficiency, fat suppression and image quality scores was performed with a paired Student''s t test and Wilcoxon''s signed rank test.

Results

Signal-to-noise ratio-efficiency for both vertebral body and spinal cord was higher with T2W IDEAL FRFSE imaging (p < 0.05) than with T2W FRFSE imaging. T2W IDEAL FRFSE demonstrated superior fat suppression (p < 0.01) and image quality (p < 0.01) compared to fat-saturated T2W FRFSE.

Conclusion

As compared with fat-saturated T2W FRFSE, IDEAL can provide a higher image quality, higher SNR-efficiency, and consistent, robust and uniform fat suppression. T2W IDEAL FRFSE is a promising technique for MR imaging of the spine at 3.0T.     

Iterative decomposition of water and fat with echo asymmetry and least‐squares estimation (IDEAL): Application with fast spin‐echo imaging

Chemical shift based methods are often used to achieve uniform water–fat separation that is insensitive to B_o inhomogeneities. Many spin‐echo (SE) or fast SE (FSE) approaches acquire three echoes shifted symmetrically about the SE, creating time‐dependent phase shifts caused by water–fat chemical shift. This work demonstrates that symmetrically acquired echoes cause artifacts that degrade image quality. According to theory, the noise performance of any water–fat separation method is dependent on the proportion of water and fat within a voxel, and the position of echoes relative to the SE. To address this problem, we propose a method termed “iterative decomposition of water and fat with echo asymmetric and least‐squares estimation” (IDEAL). This technique combines asymmetrically acquired echoes with an iterative least‐squares decomposition algorithm to maximize noise performance. Theoretical calculations predict that the optimal echo combination occurs when the relative phase of the echoes is separated by 2π/3, with the middle echo centered at π/2+πk (k = any integer), i.e., (–π/6+πk, π/2+πk, 7π/6+πk). Only with these echo combinations can noise performance reach the maximum possible and be independent of the proportion of water and fat. Close agreement between theoretical and experimental results obtained from an oil–water phantom was observed, demonstrating that the iterative least‐squares decomposition method is an efficient estimator. Magn Reson Med, 2005. © 2005 Wiley‐Liss, Inc.     

Cartilage morphology at 3.0T: Assessment of three‐dimensional magnetic resonance imaging techniques

Purpose:

To compare six new three‐dimensional (3D) magnetic resonance (MR) methods for evaluating knee cartilage at 3.0T.

Materials and Methods:

We compared: fast‐spin‐echo cube (FSE‐Cube), vastly undersampled isotropic projection reconstruction balanced steady‐state free precession (VIPR‐bSSFP), iterative decomposition of water and fat with echo asymmetry and least‐squares estimation combined with spoiled gradient echo (IDEAL‐SPGR) and gradient echo (IDEAL‐GRASS), multiecho in steady‐state acquisition (MENSA), and coherent oscillatory state acquisition for manipulation of image contrast (COSMIC). Five‐minute sequences were performed twice on 10 healthy volunteers and once on five osteoarthritis (OA) patients. Signal‐to‐noise ratio (SNR) and contrast‐to‐noise ratio (CNR) were measured from the volunteers. Images of the five volunteers and the five OA patients were ranked on tissue contrast, articular surface clarity, reformat quality, and lesion conspicuity. FSE‐Cube and VIPR‐bSSFP were compared to IDEAL‐SPGR for cartilage volume measurements.

Results:

FSE‐Cube had top rankings for lesion conspicuity, overall SNR, and CNR (P < 0.02). VIPR‐bSSFP had top rankings in tissue contrast and articular surface clarity. VIPR and FSE‐Cube tied for best in reformatting ability. FSE‐Cube and VIPR‐bSSFP compared favorably to IDEAL‐SPGR in accuracy and precision of cartilage volume measurements.

Conclusion:

FSE‐Cube and VIPR‐bSSFP produce high image quality with accurate volume measurement of knee cartilage. J. Magn. Reson. Imaging 2010;32:173–183. © 2010 Wiley‐Liss, Inc.     

High‐resolution 3D radial bSSFP with IDEAL

Radial trajectories facilitate high‐resolution balanced steady state free precession (bSSFP) because the efficient gradients provide more time to extend the trajectory in k‐space. A number of radial bSSFP methods that support fat–water separation have been developed; however, most of these methods require an environment with limited B₀ inhomogeneity. In this work, high‐resolution bSSFP with fat–water separation is achieved in more challenging B₀ environments by combining a 3D radial trajectory with the IDEAL chemical species separation method. A method to maintain very high resolution within the timing constraints of bSSFP and IDEAL is described using a dual‐pass pulse sequence. The sampling of a unique set of radial lines at each echo time is investigated as a means to circumvent the longer scan time that IDEAL incurs as a multiecho acquisition. The manifestation of undersampling artifacts in this trajectory and their effect on chemical species separation are investigated in comparison to the case in which each echo samples the same set of radial lines. This new bSSFP method achieves 0.63 mm isotropic resolution in a 5‐min scan and is demonstrated in difficult in vivo imaging environments, including the breast and a knee with ACL reconstruction hardware at 1.5 T. Magn Reson Med 71:95–104, 2014. © 2013 Wiley Periodicals, Inc.     

Comparison of T1-weighted in- and out-of-phase single shot magnetization-prepared gradient-recalled-echo with three-dimensional gradient-recalled-echo at 3.0 Tesla: preliminary observations in abdominal studies

Purpose:

To describe in‐phase (IP)/out‐of‐phase (OP) imaging with single shot magnetization‐prepared gradient‐recalled‐echo (MP‐GRE) and to compare intra‐individually IP/OP MP‐GRE with IP/OP three‐dimensional gradient‐recalled‐echo (3D‐GRE) at 3.0 Tesla (T).

Materials and Methods:

Thirty‐six subjects (15 males, 21 females; mean age 46.97 ± 14.97) who had abdominal MRI examinations including precontrast T1‐weighted IP/OP MP‐GRE, IP/OP 3D‐GRE were included in the study. Two radiologists independently evaluated the sequences qualitatively for extent of artifacts, lesion detectability, and conspicuity and subjective grading of liver steatosis. Quantitative evaluation was performed by one radiologist and included liver fat index, liver and spleen SNR, and liver‐lesion and liver‐spleen CNR.

Results:

Respiratory ghosting was more pronounced on 3D‐GRE (P < 0.0008). The degrees of parallel imaging residual artifacts, shading and blurring were significantly higher on the 3D‐GRE sequences (P < 0.0008). Spatial misregistration and bounce point artifacts were only observed with MP‐GRE images. Pixel graininess was more apparent on MP‐GRE (P < 0.0008). Lesion detectability, confidence, and conspicuity were considerably higher on MP‐GRE. Visual appreciation of steatosis was superior on 3D‐GRE. Overall image quality was superior on MP‐GRE (P < 0.0008).

Conclusion:

Higher image quality and improved lesion detectability were present with IP/OP MP‐GRE technique. Inversion‐recovery prepared techniques may represent an important evolution for precontrast T1‐weighted image at 3.0T. The good image quality of MP‐GRE sequences acquired in a free breathing manner should recommend its use in patients unable to suspend breathing. J. Magn. Reson. Imaging 2012;35:1187‐1195. © 2011 Wiley Periodicals, Inc.     

Development and evaluation of TWIST Dixon for dynamic contrast-enhanced (DCE) MRI with improved acquisition efficiency and fat suppression

Purpose:

To develop a new pulse sequence called time‐resolved angiography with stochastic trajectories (TWIST) Dixon for dynamic contrast enhanced magnetic resonance imaging (DCE‐MRI).

Materials and Methods:

The method combines dual‐echo Dixon to generate separated water and fat images with a k‐space view‐sharing scheme developed for 3D TWIST. The performance of TWIST Dixon was compared with a volume interpolated breathhold examination (VIBE) sequence paired with spectrally selective adiabatic inversion Recovery (SPAIR) and quick fat‐sat (QFS) fat‐suppression techniques at 3.0T using quantitative measurements of fat‐suppression accuracy and signal‐to‐noise ratio (SNR) efficiency, as well as qualitative breast image evaluations.

Results:

The water fraction of a uniform phantom was calculated from the following images: 0.66 ± 0.03 for TWIST Dixon; 0.56 ± 0.23 for VIBE‐SPAIR, and 0.53 ± 0.14 for VIBE‐QFS, while the reference value is 0.70 measured by spectroscopy. For phantoms with contrast (Gd‐BOPTA) concentration ranging from 0–6 mM, TWIST Dixon also provides consistently higher SNR efficiency (3.2–18.9) compared with VIBE‐SPAIR (2.8–16.8) and VIBE‐QFS (2.4–12.5). Breast images acquired with TWIST Dixon at 3.0T show more robust and uniform fat suppression and superior overall image quality compared with VIBE‐SPAIR.

Conclusion:

The results from phantom and volunteer evaluation suggest that TWIST Dixon outperforms conventional methods in almost every aspect and it is a promising method for DCE‐MRI and contrast‐enhanced perfusion MRI, especially at higher field strength where fat suppression is challenging. J. Magn. Reson. Imaging 2012;36:483–491. © 2012 Wiley Periodicals, Inc.     

Fast spin-echo triple echo dixon: Initial clinical experience with a novel pulse sequence for simultaneous fat-suppressed and nonfat-suppressed T2-weighted spine magnetic resonance imaging

Purpose

To evaluate a prototype fast spin‐echo (FSE) triple‐echo Dixon (FTED) technique for T2‐weighted spine imaging with and without fat suppression compared to conventional T2‐weighted fast recovery (FR) FSE and short‐tau inversion recovery (STIR) imaging.

Materials and Methods

Sixty‐one patients were referred for spine magnetic resonance imaging (MRI) including sagittal FTED (time 2:26), STIR (time 2:42), and T2 FRFSE (time 2:55). Two observers compared STIR and FTED water images and T2 FRFSE and FTED T2 images for overall image quality, fat suppression, anatomic sharpness, motion, cerebrospinal fluid (CSF) flow artifact, susceptibility, and disease depiction.

Results

On FTED images water and fat separation was perfect in 58 (.95) patients. Compared to STIR, the FTED water images demonstrated less motion in 57 (.93) of 61 patients (P < 0.05), better anatomic sharpness in 51 (.84) and patients (P < 0.05), and less CSF flow artifact in 7 (.11) P < 0.05) patients. There was no difference in fat suppression or chemical shift artifact. T2 FRFSE and FTED T2 images showed equivalent motion, CSF flow, and chemical shift artifact. Lesion depiction was equivalent on FTED water and STIR images and FTED T2 and T2 FRFSE images.

Conclusion

FTED efficiently provides both fat‐suppressed and nonfat‐suppressed T2‐weighted spine images with excellent image quality, equal disease depiction, and 56% reduction in scan time compared to conventional STIR and T2 FRFSE. J. Magn. Reson. Imaging 2011;33:390–400. © 2011 Wiley‐Liss, Inc.     

Quantification of hepatic steatosis with MRI: The effects of accurate fat spectral modeling

Purpose

To develop a chemical‐shift–based imaging method for fat quantification that accounts for the complex spectrum of fat, and to compare this method with MR spectroscopy (MRS). Quantitative noninvasive biomarkers of hepatic steatosis are urgently needed for the diagnosis and management of nonalcoholic fatty liver disease (NAFLD).

Materials and Methods

Hepatic steatosis was measured with “fat‐fraction” images in 31 patients using a multiecho chemical‐shift–based water‐fat separation method at 1.5T. Fat‐fraction images were reconstructed using a conventional signal model that considers fat as a single peak at –210 Hz relative to water (“single peak” reconstruction). Fat‐fraction images were also reconstructed from the same source images using two methods that account for the complex spectrum of fat; precalibrated and self‐calibrated “multipeak” reconstruction. Single‐voxel MRS that was coregistered with imaging was performed for comparison.

Results

Imaging and MRS demonstrated excellent correlation with single peak reconstruction (r² = 0.91), precalibrated multipeak reconstruction (r² = 0.94), and self‐calibrated multipeak reconstruction (r² = 0.91). However, precalibrated multipeak reconstruction demonstrated the best agreement with MRS, with a slope statistically equivalent to 1 (0.96 ± 0.04; P = 0.4), compared to self‐calibrated multipeak reconstruction (0.83 ± 0.05, P = 0.001) and single‐peak reconstruction (0.67 ± 0.04, P < 0.001).

Conclusion

Accurate spectral modeling is necessary for accurate quantification of hepatic steatosis with MRI. J. Magn. Reson. Imaging 2009;29:1332–1339. © 2009 Wiley‐Liss, Inc.     

Three-dimensional contrast-enhanced hepatic MR imaging: comparison between a centric technique and a linear approach with partial Fourier along both slice and phase directions

Purpose

To compare the image quality of two variants of a three‐dimensional (3D) gradient echo sequence (GRE) for hepatic MRI.

Materials and Methods

Thirty‐nine patients underwent hepatic MRI on a 3.0 Tesla (T) magnet (Intera Achieva; Philips Medical Systems). The clinical protocol included two variants of a 3D GRE with fat suppression: (i) a “centric” approach, with elliptical centric k‐space ordering and (ii) an “enhanced” approach using linear sampling and partial Fourier in both the slice and phase encoding direction. “Centric” and “Enhanced” 3D GRE images were obtained both precontrast (n = 32) and after gadoxetic acid injection (n = 39). Two reviewers jointly reviewed MR images for anatomic sharpness, overall contrast, homogeneity, and absence of artifacts. The liver‐to‐lesion signal difference ratio (SDR) was measured. Paired sample Wilcoxon test and paired t‐tests were used.

Results

Enhanced 3D GRE images performed better than centric 3D GRE images with respect to anatomic sharpness (P = 0.0156), overall contrast (P = 0.0195), homogeneity (P < 0.0001), and absence of artifacts (P = 0.0003) on precontrast images. For postcontrast MRI, enhanced 3D GRE images showed better quality in terms of overall contrast (P = 0.0195), homogeneity (P < 0.0001), and absence of artifacts (P = 0.009). Liver‐to‐lesion SDR on enhanced 3D GRE images (0.48 ± 0.13) was significantly higher than that of conventional 3D GRE images (0.40 ± 0.19, P = 0.0004) on postcontrast images, but not on precontrast images.

Conclusion

The enhanced 3D GRE sequence available on our scanner provided better hepatic image quality than the centric variant, without compromising lesion contrast. J. Magn. Reson. Imaging 2011;33:160–166. © 2010 Wiley‐Liss, Inc.