Improving Stability and Release Kinetics of Microencapsulated Tetanus Toxoid by Co-Encapsulation of Additives

Purpose. Tetanus toxoid (Ttxd) encapsulated in polyester microspheres (MS) for single injection immunization have so far given pulsatile in vitro release and strong immune response in animals, but no boosting effect. This has been ascribed to insufficient toxoid stability within the MS exposed to in vivo conditions over a prolonged time period. This study examined the effect of co-encapsulated putative stabilizing additives. Methods. Two different Ttxd were encapsulated in poly(D,L-lactic-co-glycolic acid) (PLGA 50:50) and poly(D,L-lactic acid) (PLA) MS by spray-drying. The influence of co-encapsulated additives on toxoid stability, loading in and release from the MS, was studied by fluorimetry and ELISA. Results. Co-encapsulated albumin, trehalose and -hydroxypropyl cyclodextrin all improved the toxoid encapsulation efficiency in PLGA 50:50 MS. Albumin increased the encapsulation efficiency of antigenic Ttxd by one to two orders of magnitude. Further, with albumin or a mixture of albumin and trehalose ELISA responsive Ttxd was released over 1–2 months following a pulsatile pattern. Conclusions. Optimized Ttxd containing MS may be valuable for a single-dose vaccine delivery system.     

A Novel System Based on a Poloxamer/ PLGA Blend as a Tetanus Toxoid Delivery Vehicle

Purpose. Previous work on the encapsulation of proteins and antigens in poly(lactic-co-glycolic acid) (PLGA) microspheres has led to the conclusion that microencapsulated antigens are frequently inactivated due to their interaction with the polymer. To improve the compatibility of the antigen with the polymer, we have devised a novel microencapsulated system consisting of a blend of PLGA 50:50 and poloxamer 188 (Pluronic^® F68) and applied it to the delivery of tetanus antigen. Methods. Tetanus toxoid was encapsulated in microspheres containing different amounts of poloxamer using an anhydrous procedure based on an oil-in-oil solvent extraction process. The compatibility of the polymers was studied by Fourier transform infrared (FT-IR) spectroscopy. Microspheres were assayed in vitro and in vivo for their ability to deliver active antigen for extended periods of time. Results. Analysis by FT-IR spectroscopy evidenced the miscibility of both polymers by a hydrogen bonding mechanism. In vitro release studies revealed that microspheres containing poloxamer released anti-genically active TT, in a pulsatile manner, for up to 50 days. In addition, it was observed that the intensity and duration of the pulses were dependent on both poloxamer content and TT loading in the microspheres. The in vivo evaluation of this new system showed that the neutralizing antibodies elicited by the TT encapsulated in poloxamer-PLGA microspheres were considerably higher and more prolonged than those obtained after administration of the aluminum phosphate-adsorbed toxoid. Conclusions. These results indicate the importance of devising new microencapsulation approaches specially adapted for preserving the activity of protein antigens incorporated within PLGA microspheres.     

Determinants of Release Rate of Tetanus Vaccine from Polyester Microspheres

Controlled-release formulations based on poly(lactic) (PLA) and poly(lactic/glycolic) acid (PLGA) microspheres containing tetanus vaccine were designed. The polymers forming the microspheres were L-PLA of different molecular weights and DL-PLGA, 50:50. These microspheres were prepared by two solvent elimination procedures, both using a double emulsion, and were characterized for size, morphology, and toxoid release kinetics. The influence of formulation variables such as polymer type, vaccine composition, and vaccine/polymer ratio was also investigated. Both techniques yielded microspheres with similar size, morphology, and release properties. Microsphere size was dependent on the type of polymer and the presence of the surfactant L--phosphatidylcholine, which led to a reduction in microsphere size. On the other hand, the release kinetics of encapsulated protein were affected by the polymer properties (ratio lactic/glycolic acid and molecular weight) as well as by the vaccine composition, vaccine loading, and microsphere size. Moreover, for some formulations, a decrease in microsphere size occurred simultaneously, with an increase in porosity leading to an augmentation of release rate. The changes in the PLA molecular weight during in vitro release studies indicated that release profiles of tetanus toxoid from these microspheres were only marginally influenced by polymer degradation. A significant fraction of protein (between 15 and 35%) was initially released by diffusion through water-filled channels. In contrast, the decrease in the PLGA molecular weight over the first 10 days of incubation suggested that erosion of the polymer matrix substantially affects protein release from these microspheres. Among all formulations developed, two differing in microsphere size, polymer hydrophobicity, and release profile were selected for in vivo administration to mice. Administration of both formulations resulted in tetanus neutralizing antibody levels that were higher than those obtained after administration of the fluid toxoid.     

Loading of Tetanus Toxoid to Biodegradable Nanoparticles from Branched Poly(Sulfobutyl-Polyvinyl Alcohol)-g-(Lactide-Co-Glycolide) Nanoparticles by Protein Adsorption: A Mechanistic Study

Purpose. Mucosal delivery of vaccine-loaded nanoparticles (NP) is an attractive proposition from an immunologic perspective. Although numerous NP preparation methods are known, sufficient antigen loading of NP remains a challenge. The aim of this study was to evaluate adsorptive loading of NP with a negatively charged surface structure using tetanus toxoid (TT) as a model vaccine. Methods. Blank NP, consisting of poly(sulfobutyl-polyvinyl alcohol)-g-(lactide-co-glycolide), as well as poly(lactide-co-glycolide) NP were prepared by a solvent displacement technique. The use of polymers with different degrees of substitution resulted in NP with different negative surfaces charges. Adsorption of TT to NP was performed varying to NP surface properties, protein equilibrium concentration, and loading conditions. Results. The protein adsorption was controlled by NP surface properties, and maximum TT adsorption occurred at highly negatively charged NP surfaces. Results from isothermal titration calorimetry and -potential measurement suggest an adsorption process governed by electrostatic interactions. The adsorption followed the Langmuir isotherm in the concentration ranges studied. TT withstood this gentle loading procedure in a nonaggregated, enzyme-linked immunoabsorbant assay-active form. Conclusions. The results demonstrate that negatively charged NP consisting of poly(sulfobutyl-polyvinyl alcohol)-g-(lactide-co-glycolide) are suitable for adsorptive loading with TT and may have potential for mucosal vaccination.     

Tetanus Toxoid Loaded Nanoparticles from Sulfobutylated Poly(Vinyl Alcohol)-Graft-Poly(Lactide-co-Glycolide): Evaluation of Antibody Response After Oral and Nasal Application in Mice

Purpose. Aim of the study was the evaluation of the potential of novel tetanus toxoid (TT) loaded nanoparticles (NP) for electing an immune response in mice against TT. Methods. Six week-old female Balb/c mice were immunized by oral (p.o.), nasal (i.n.) and intraperitoneal (i.p.) application of TT NP loaded by adsorption. As polymer a novel polyester, sulfobutylated poly(vinyl alcohol)-graft-poly(lactide-co-glycolide), SB(43)-PVAL-g-PLGA was used. Blood samples were collected 4 and 6 weeks after immunization and assayed for serum IgG- as well as IgA antibody titers by ELISA. NP formulations varying in size and loading were compared to alum adsorbates as well as to TT solutions. Results. Both, p.o. and i.n. administration of TT associated NP increased serum titers up to 3 × 10³ (IgG) and 2 × 10³ (IgA). While small NP induced significantly higher titers then larger ones after oral administration, intermediate NP induced antibodies after nasal application. Of the mucosal routes investigated, i.n. seems to be more promising compared to p.o. immunization. Conclusions. Antigen loaded NP prepared from surface modified polyesters combined with CT show considerable potential as a vaccine delivery system for mucosal immunization. The results warrant further experiments to explore in more detail the potential use of NP as mucosal vaccine delivery system.     

布比卡因缓释微球的制备及体外释药特性评价

目的研究布比卡因缓释微球制备方法并对其体外释药特性进行评价。方法采用紫外分光光度法测定布比卡因微球载药量、包封率;采用HPLC法测定微球体外释放;通过正交设计优选微球制备工艺;以乳酸羟基乙酸共聚物为载体,使用乳化溶剂挥发法制备布比卡因微球;用扫描电镜观察所得微球的粒径和形态;通过体外释药实验考察布比卡因乳酸羟基乙酸共聚物微球的缓释作用。结果微球载药量、包封率和体外释放的测定方法符合方法学要求;按照优选处方制备所得的微球为圆整球体,表面多孔,呈蜂窝状,粒径50~100μm之间的微球占80%;体外释放符合Ritger-Peppas方程,t1/2=242.05 h。结论乳化溶剂挥发法适用于布比卡因乳酸羟基乙酸共聚物微球的制备,所制得的微球形态圆整,在体外具有明显缓释作用。     

Reduction in burst release after coating poly(D,L-lactide-co-glycolide) (PLGA) microparticles with a drug-free PLGA layer

The high initial burst release of a highly water-soluble drug from poly (D,L-lactide-co-glycolide) (PLGA) microparticles prepared by the multiple emulsion (w/o/w) solvent extraction/evaporation method was reduced by coating with an additional polymeric PLGA layer. Coating with high encapsulation efficiency was performed by dispersing the core microparticles in peanut oil and subsequently in an organic polymer solution, followed by emulsification in the aqueous solution. Hardening of an additional polymeric layer occurred by oil/solvent extraction. Peanut oil was used to cover the surface of core microparticles and, therefore, reduced or prevented the rapid erosion of core microparticles surface. A low initial burst was obtained, accompanied by high encapsulation efficiency and continuous sustained release over several weeks. Reduction in burst release after coating was independent of the amount of oil. Either freshly prepared (wet) or dried (dry) core microparticles were used. A significant initial burst was reduced when ethyl acetate was used as a solvent instead of methylene chloride for polymer coating. Multiparticle encapsulation within the polymeric layer increased as the size of the core microparticles decreased (< 50 µm), resulting in lowest the initial burst. The initial burst could be controlled well by the coating level, which could be varied by varying the amount of polymer solution, used for coating.     

Microencapsulation with carrageenan-locust bean gum mixture in a multiphase emulsification technique for sustained drug release

Abstract

A multiphase emulsification technique was modified in this process of microencapsulating gentamicin sulphate, thus avoiding the necessity for a surfactant in preparing the secondary emulsion for a W/O/W emulsion. Various proportions of iota-carrageenan (i-C) and locust bean gum (LBG) were investigated for the W/O/W emulsion after forming the primary W/O emulsion with sorbitan trioleate, Span 85. Upon removal of the oil phase (chloroform) from the W/O/W emulsion by heating (60-65°C), microcapsules or ‘W/W particles containing drug dissolved in sodium hyaluronate were spontaneously formed. These were dispersed in a solution of a mixture of 5-10 per cent w/v polyvinyl alcohol, PVA (average MW 50000-106000; 98 per cent hydrolysed) and 3 per cent v/v polyethylene glycol 200 (PEG 200), and dried to form the hydrogel film casts. Our in vitro experiments in isotonic phosphate buffer solution (pH 7-4) at 37°C., showed that the release of gentamicin sulphate was dependent on concentration of LBG, and concentration or molecular weight of PVA. With the exception of PVA hydrogel matrix preparations containing 20 per cent w/v LBG, all other formulations showed a significant initial ‘burst' release of drug within 6h. The drug-containing microcapsules in the PVA hydrogel film with 20 per cent w/v LBG, exhibited an almost zero-order release of drug up to 140h. It is postulated that an effective barrier or high-density membrane enveloping the microcapsules was formed between i-C and LBG because of their unique molecular configurations. This phenomenon, together with the possible adsorption of i-C molecules at the transient oil and outer aqueous phase interface, presumably eliminated the need for a permanent oil phase and/or an O/W surfactant normally required for preparing W/O/W emulsions.     

Dose and Load Studies for Subcutaneous and Oral Delivery of Poly(lactide-co-glycolide) Microspheres Containing Ovalbumin

Poly(lactide-co-glycolide) microspheres containing different loads of OVA (0.05, 0.1, 0.5 and 1.0% w/w) were manufactured by a w/o/w emulsion/solvent evaporation method. Low load efficiencies of less than 20% were observed. Normal size distributions with mean volume diameters ranging from 3.7 to 4.7 µm were obtained for different batches. The in vitro release of OVA from different loaded microspheres showed an expected burst release with all batches. The in vivo dose study (1, 10, 25, 50 µg of OVA) was performed by subcutaneous and oral inoculation in mice by single (0 week) or double (0 and 3 weeks) administration of PLGA 50/50 microspheres containing 0.1% OVA. Subcutaneous administration showed an immune response (serum Ig levels by ELISA) statistically (Fishers paired t-test; P < 0.05) above OVA saline negative controls at 3, 6 and 12 weeks after administration. Oral administration of microspheres produced statistically higher systemic immune responses at the higher doses. Single and double inoculation orally and subcutaneously produced similar serum antibody levels. The in vivo load study was performed by subcutaneous and oral administration to mice of 25 µg OVA contained in various loaded (0.05, 0.1, 0.5 and 1.0% w/w) microspheres. Serum immune responses at 3, 6, and 12 weeks after inoculation were statistically above OVA saline controls and were inversely proportional to the OVA load using either route. This observation suggested a relationship between the number of microspheres delivered and the in vivo serum response. Single subcutaneous administration of 0.05 or 0.1% OVA loaded PLGA 50/50 microspheres induced larger immune responses compared with complete Freunds adjuvant.     

Characterization of Poly(glycolide-co-D,L-lactide)/Poly(D,L-lactide) Microspheres for Controlled Release of GM-CSF

Purpose. This study describes the preparation and characterization of a controlled release formulation of granulocyte-macrophage colony-stimulating factor (GM-CSF) encapsulated in poly(glycolide-co-D,L-lactide) (PLGA) and poly(D,L-lactide) (PLA) microspheres. Methods. GM-CSF was encapsulated in PLGA/PLA microspheres by a novel silicone oil based phase separation process. Several different blends of PLGA and low molecular weight PLA were used to prepare the microspheres. The microspheres and the encapsulated GM-CSF were extensively characterized both in vitroand in vivo. Results. Steady release of GM-CSF was achieved over a period of about one week without significant 'burst' of protein from the microspheres. Analysis of microsphere degradation kinetics by gel permeation chromatography (GPC) indicated that low molecular weight PLA enhanced the degradation of the PLGA and thereby affected release kinetics. GM-CSF released from the microspheres was found to be biologically active and physically intact by bioassay and chromato-graphic analysis. Analysis of serum from mice receiving huGM-CSF indicated that the GM-CSF was biologically active and that a concentration of greater than 10 ng/mL was maintained for a period lasting at least nine days. MuGM-CSF was not detected followingin vivo administration of muGM-CSF microspheres. The tissues of mice receiving muGM-CSF microspheres were characterized by infiltration of neutrophils, and macrophages which were in significant excess of those found in mice administered with placebo controls (i.e. microspheres without GM-CSF). Conclusions. This study demonstrates the influence of formulation parameters on the encapsulation of GM-CSF in PLGA/PLA microspheres and its controlled release in biologically active form. The intense local tissue reaction in mice to muGM-CSF microspheres demonstrates the importance of the mode of delivery on the pharmacologic activity of GM-CSF.     

Study of the Influence of Several Stabilizing Agents on the Entrapment and In Vitro Release of pBC 264 from Poly(Lactide-Co-Glycolide) Microspheres Prepared by a W/O/W Solvent Evaporation Method

Pharmaceutical Research -     

In Vitro and in Vivo Evaluation in Rabbits of a Controlled Release 5-fluorouracil Subconjunctival Implant Based on Poly(D,L-lactide-co-glycolide)

Purpose. To design a controlled release 5-fluorouracil (5-FU) implant to provide prolonged antifibroblast concentrations of 5-FU in the sub-conjunctival tissues but low concentrations of 5-FU in other ocular tissues. Methods. Implants (5 mg; 2.5 mm diameter × 1.2 mm thickness) of 5-FU or 9:1, 8:2, 7:3 5-FU to polymer mass ratios were made by compression. Poly(D,L-lactide-co-glycolide) polymers with 50:50 and 75:25 lactide to glycolide ratios were used. In vitro release characteristics of four types of implants were studied: 5-FU alone (CT), 5-FU/ polymer matrices (MT), coated 5-FU/polymer matrices with a central hole drilled through the matrix and coating (CM1), and with a central hole in the coating (CM2). MT and CM1 (9:1 drug/polymer) were selected for subconjunctival implantation in rabbits. ¹⁴C-5-FU levels in various ocular tissues and retrieved pellets were monitored. Results. First-order release was observed from CT, MT and CM1 implants. Zero-order release profiles were observed from CM2 implants. Drug release was retarded by formulating 5-FU in a matrix comprising poly(D,L-lactide-co-glycolide) which in turn could be modified by the lactide/glycolide ratio of the polymer, the drug to polymer ratio, coating, and hole dimensions. First-order release kinetics were observed for MT and CM1 implants in the in vivo study in rabbits. A correlation between in vitro and in vivo release was established which allowed in vivo release to be predicted from in vitro release data. For CM1, therapeutic tissue concentrations of 35.2 µg/g (conjunctiva) and 17.7µLg/g (sclera) were found at the implantation site up to 200 hours post-implantation. Tracer levels were undetectable in other ocular tissues. Conclusions. The CM1 implant maintained steady antifibroblast levels in target tissues and minimized levels in nontarget tissues.     

Biodegradable microspheres of ketorolac tromethamine for parenteral administration

Ketorolac tromethamine loaded microspheres were prepared using two different polyesters, namely poly (lactic acid) and poly (glycolic acid) by solvent evaporation technique. The morphology of microspheres was analysed by scanning electron microscopy. In vitro release profiles of these microspheres were studied in phosphate buffered saline pH 7.4. The release kinetics of ketorolac tromethamine from the microspheres was evaluated by fitting the release data to the zero-order, Higuchi and korsemeyer-peppas equations. All microspheres showed initial burst release, followed by fickian diffusion of drug through microspheres. These microspheres were formulated as parenterals to have controlled release system.     

Nanotechnology-based drug delivery of ropinirole for Parkinson’s disease

A new drug delivery system is developed for ropinirole (RP) for the treatment of Parkinson’s disease (PD) consisting of biodegradable poly (D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs). The formulation selected was prepared with 8?mg RP and 50?mg PLGA 502. This formulation exhibited mean encapsulation efficiency of 74.8?±?8.2%, mean particle size lower than 155?nm, the zeta potential of ?14.25?±?0.43?mV and zero-order in vitro release of RP (14.13?±?0.17?μg/h/10?mg NPs) for 5?d. Daily doses of the neurotoxin rotenone (2?mg/kg) given i.p. to male Wistar rats induced neuronal and behavioral changes similar to those of PD. Once neurodegeneration was established (15?d) animals received RP in saline (1?mg/kg/d for 35?d) or encapsulated within PLGA NPs (amount of NPs equivalent to 1?mg/kg/d RP every 3 d for 35?d). Brain histology and immunochemistry (Nissl-staining, glial fibrillary acidic protein and tyrosine hydroxylase immunohistochemistry) and behavioral testing (catalepsy, akinesia, rotarod and swim test) showed that RP-loaded PLGA NPs were able to revert PD-like symptoms of neurodegeneration in the animal model assayed.     

Gamma Irradiation Effects on Molecular Weight and in Vitro Degradation of Poly(D,L-Lactide-CO-Glycolide) Microparticles

Purpose. The objective of the reported work was to quantitatively establish -irradiation dose effects on initial molecular weight distributions and in vitro degradation rates of a candidate credible biopolymeric delivery system. Methods. Poly(D,L-lactide-co-glycolide) (PLGA) porous microparticles were prepared by a phase-separation technique using a 50:50 copolymer with 30,000 nominal molecular weight. The microparticles were subjected to 0, 1.5, 2.5, 3.5, 4.5, and 5.5 Mrad doses of -irradiation and examined by size exclusion chromatography (SEC) to determine molecular weight distributions. The samples were subsequently incubated in vitro at 37°C in pH 7.4 PBS and removed at timed intervals for gravimetric determinations of mass loss and SEC determinations of molecular weight reduction. Results. Irradiation reduced initial molecular weight distributions as follows (M_n values shown parenthetically for irradiation doses): 0 Mrad (M_n = 25200 Da), 1.5 Mrad (18700 Da), 2.5 Mrad (17800 Da), 3.5 Mrad (13800 Da), 4.5 Mrad (12900 Da), 5.5 Mrad (11300 Da). In vitro degradation showed a lag period prior to zero-order loss of polymer mass. Onset times for mass loss decreased with increasing irradiation dose: 0 Mrad (onset = 3.4 weeks), 1.5 Mrad (2.0 w), 2.5 Mrad (1.5 w), 3.5 Mrad (1.3 w), 4.5 Mrad (1.0 w), 5.5 Mrad (0.8 w). The zero-order mass loss rate was 12%/week, independent of irradiation dose. Onset of erosion corresponded to M_n = 5200 Da, the point where the copolymer becomes appreciably soluble. Conclusions. The data demonstrated a substantial effect of -irradiation on initial molecular weight distribution and onset of mass loss for PLGA, but no effect on rate of mass loss.     

Stabilization and Controlled Release of Bovine Serum Albumin Encapsulated in Poly(D,L-lactide) and Poly(ethylene glycol) Microsphere Blends

Purpose. The acidic microclimate in poly(D, L-lactide-co-glycolide) 50/50 microspheres has been previously demonstrated by our group as the primary instability source of encapsulated bovine serum albumin (BSA). The objectives of this study were to stabilize the encapsulated model protein, BSA, and to achieve continuous protein release by using a blend of: slowly degrading poly(D, L-lactide) (PLA), to reduce the production of acidic species during BSA release; and pore-forming poly(ethylene glycol) (PEG), to increase diffusion of BSA and polymer degradation products out of the polymer. Methods. Microspheres were formulated from blends of PLA (Mw 145,000) and PEG (Mw 10,000 or 35,000) by using an anhydrous oil-in-oil emulsion and solvent extraction (O/O) method. The polymer blend composition and phase miscibility were examined by FT-IR and DSC, respectively. Microsphere surface morphology, water uptake, and BSA release kinetics were also investigated. The stability of BSA encapsulated in microspheres was examined by losses in protein solubility, SDS-PAGE, IEF, CD, and fluorescence spectroscopy. Results. PEG was successfully incorporated in PLA microspheres and shown to possess partial miscibility with PLA. A protein loading level of 5% (w/w) was attained in PLA/PEG microspheres with a mean diameter of approximately 100 m. When PEG content was less than 20% in the blend, incomplete release of BSA was observed with the formation of insoluble, and primarily non-covalent aggregates. When 20%-30% PEG was incorporated in the blend formulation, in vitro continuous protein release over 29 days was exhibited. Unreleased BSA in these formulations was water-soluble and structurally intact. Conclusions. Stabilization and controlled relaease of BSA from PLA/PEG microspheres was achieved due to low acid and high water content in the blend formulation.     

Preparation and evaluation of polymer based microcarriers for all-trans-retinoic acid

Polymeric biomaterials are being investigated for the last several years because of their controllable properties. In this study, it was aimed to prepare and evaluate the atRA carrying system using Poly(lactide-co-glycolide) (PLGA). Microparticles were characterized in terms of morphology and encapsulation efficiency. Release studies were performed for the evaluation of drug release rates. Cytotoxicity tests were implemented on MCF-7 Human breast cancer cell line for the investigation of drug and polymer toxicity. The microparticles were found smooth and spherical in shape. However, as the loaded drug amount increased, the sizes of microparticles also increased and the size distribution became less uniform. The sizes of atRA-loaded microparticles ranged between 1–10 µm. The encapsulation efficiency of atRetinoic acid (all-trans-Retinoic acid) was achieved approximately %90. Approximately, 45% of atRA was released from atRA-loaded microparticles by the end of 4–5 days. Cell growth inhibition was observed after 4 days of incubation of cells with PLGA microparticles.     

Pharmaceutical Evaluation of Gas-Filled Microparticles as Gene Delivery System

Purpose. To produce and characterize a nonviral ultrasound-controlled release system of plasmid DNA (pDNA) encapsulated in gas-filled poly(D,L-lactide-co-glycolide) microparticles (PLGA-MPs). Methods. Different cationic polymers were used to form pDNA/polymer complexes to enhance the stability of pDNA during microparticle preparation. The physico-acoustical properties of the microparticles, particle size, pDNA integrity, encapsulation efficiency and pDNA release behavior were studied in vitro. Results. The microparticles had an average particle size of around 5 m. More than 50% of all microparticles contained a gas core, and when exposed to pulsed ultrasound as used for color Doppler imaging create a signal that yields typical color patterns (stimulated acoustic emission) as a result of the ultrasound-induced destruction of the microparticles. Thirty percent of the pDNA used was successfully encapsulated and approximately 10% of the encapsulated pDNA was released by ultrasound within 10 min. Conclusions. Plasmid DNA can be encapsulated in biodegradable gas-filled PLGA-MPs without hints for a structural disintegration. A pDNA release by ultrasound-induced microparticle-destruction could be shown in vitro.     

Biological Activity of Lysozyme After Entrapment in Poly (d,l-lactide-co-glycolide)-Microspheres

Purpose. The purpose of this study was to investigate the process of preparing microspheres for maximising entrapment efficiency (EE) and retained biological activity (RBA) of peptides and proteins. Methods. A controlled-release formulation based on poly(d,l-lactide-co-glycolide) was designed and produced using a small-scale double emulsion method. These PLG microspheres contained a model peptide, lysozyme. The retained bioactivity of the incorporated lysozyme was determined by bacterial assay. The size distributions and the morphology of the microspheres were characterized. Results. The RBA and EE improved when the PLG concentration in the organic phase of the emulsion was increased. A high lysozyme concentration in the inner water phase of the emulsion resulted in decreased EE and an increase in the proportion of fragmented particles. The RBA of lysozyme in the microspheres varied between 30 and 80% with changes to the process. Conclusions. The study shows that the RBA of lysozyme in PLG microspheres is strongly dependent on the experimental conditions for preparing the microspheres. Measurement of the EE alone, without the RBA is insufficient to evaluate the efficacy of the designed delivery system.     

Formulation, and Evaluation of Pentoxifylline-Loaded Poly(��-caprolactone) Microspheres

Pentoxifylline-loaded poly(ε-caprolactone) microspheres were prepared by solvent evaporation technique with different drug to carrier ratio F1 (1:3), F2 (1:4), F3 (1:5) and F4 (1:6). The microspheres were characterized for particle size, scanning electron microscopy, FT-IR study, percentage yield, drug entrapment, stability studies and for in vitro release kinetics. The shape of microspheres was found to be spherical by SEM. The size of microspheres was found to be ranging 59.3±6.3μm to 86.22±4.23 μm. Among the four drug to carrier ratio, F3 (1:5) showed maximum percentage yield of 83.34±2.46% and F2 (1:4) showed highest drug entrapment of 76.92±3.24% w/w. It was found that there was no interaction between drug and polymer by FT-IR study. No appreciable difference was observed in the extent of degradation of product during 60 d in the microspheres, which were stored at various temperatures. In the in vitro release study formulation F2 (1:4) showed 90.34% drug release at 15 h and found to be sustained. The release followed Higuchi kinetics indicating diffusion controlled drug release.