Flow Perfusion Culture of Marrow Stromal Cells Seeded on Porous Biphasic Calcium Phosphate Ceramics

Calcium phosphate ceramics have been widely used for filling bone defects to aid in the regeneration of new bone tissue. Addition of osteogenic cells to porous ceramic scaffolds may accelerate the bone repair process. This study demonstrates the feasibility of culturing marrow stromal cells (MSCs) on porous biphasic calcium phosphate ceramic scaffolds in a flow perfusion bioreactor. The flow of medium through the scaffold porosity benefits cell differentiation by enhancing nutrient transport to the scaffold interior and by providing mechanical stimulation to cells in the form of fluid shear. Primary rat MSCs were seeded onto porous ceramic (60% hydroxyapatite, 40% β-tricalcium phosphate) scaffolds, cultured for up to 16 days in static or flow perfusion conditions, and assessed for osteoblastic differentiation. Cells were distributed throughout the entire scaffold by 16 days of flow perfusion culture whereas they were located only along the scaffold perimeter in static culture. At all culture times, flow perfused constructs demonstrated greater osteoblastic differentiation than statically cultured constructs as evidenced by alkaline phosphatase activity, osteopontin secretion into the culture medium, and histological evaluation. These results demonstrate the feasibility and benefit of culturing cell/ceramic constructs in a flow perfusion bioreactor for bone tissue engineering applications.     

Scaffold mesh size affects the osteoblastic differentiation of seeded marrow stromal cells cultured in a flow perfusion bioreactor

In this study, we cultured marrow stromal cells on titanium fiber meshes in a flow perfusion bioreactor and examined the effect of altering scaffold mesh size on cell behavior in an effort to develop a bone tissue construct composed of a scaffold, osteogenic cells, and extracellular matrix. Scaffolds of differing mesh size, that is, distance between fibers, were created by altering the diameter of the mesh fibers (20 or 40 microm) while maintaining a constant porosity. These scaffolds had a porosity of 80% and mesh sizes of 65 microm (20-microm fibers) or 119 microm (40-microm fibers). Cell/scaffold constructs were grown in static culture or under flow for up to 16 days and assayed for osteoblastic differentiation. Cellularity was higher at early time points and Ca2+ deposition was higher at later time points for flow constructs over static controls. The 20-microm mesh had reduced cellularity in static culture. Under flow conditions, mass transport limitations are mitigated allowing uniform cell growth throughout the scaffold, and there was no difference in cellularity between mesh types. There was greater alkaline phosphatase (ALP) activity, osteopontin levels, and calcium under flow at 8 days for the 40-microm mesh compared to the 20-microm mesh. However, by day 16, the trend was reversed, suggesting the time course of differentiation was dependent on scaffold mesh size under flow conditions. However, this dependence was not linear with respect to time; larger mesh size was conducive to early osteoblast differentiation while smaller mesh size was conducive to later differentiation and matrix deposition.     

Modulation of osteogenic properties of biodegradable polymer/extracellular matrix scaffolds generated with a flow perfusion bioreactor

In this study, composite scaffolds consisting of both synthetic and natural components with controllable properties were generated by incorporating mineralized extracellular matrix (ECM) and electrospun poly(ε-caprolactone) (PCL) microfiber scaffolds. Mesenchymal stem cells (MSCs) were cultured on PCL scaffolds under flow perfusion conditions with culture medium supplemented with dexamethasone to investigate the effect of culture duration on mineralized extracellular matrix deposition. MSCs differentiated down the osteogenic lineage and produced extracellular matrix with different compositions of mineral, collagen, and glycosaminoglycan with distinct morphologies at various stages of osteogenesis. To determine whether the presence and maturity of mineralized extracellular matrix influences osteogenic differentiation in vitro, PCL/ECM constructs were decellularized to yield PCL/ECM composite scaffolds that were subsequently seeded with MSCs and cultured in the absence of dexamethasone. The presence of mineralized matrix reduced cellular proliferation while stimulating alkaline phosphatase activity with increasing amounts of calcium deposition over time. PCL/ECM composite scaffolds containing the most mature mineralized matrix resulted in the most rapid increase and highest levels of alkaline phosphatase activity and calcium deposition compared to all other scaffold groups. Therefore, we demonstrate that mineralized extracellular matrix generated under controlled flow perfusion conditions can impart osteogenic properties to an osteoconductive polymer scaffold, and that the maturity of this matrix influences osteogenic differentiation in vitro, even in the absence of dexamethasone.     

Effect of bone extracellular matrix synthesized in vitro on the osteoblastic differentiation of marrow stromal cells

Alternative materials for bone grafts are gaining greater importance in dentistry and orthopaedics, as the limitations of conventional methods become more apparent. We are investigating the generation of osteoinductive matrix in vitro by culturing cell/scaffold constructs for tissue engineering applications. The main strategy involves the use of a scaffold composed of titanium (Ti) fibers seeded with progenitor cells. In this study, we investigated the effect of extracellular matrix (ECM) laid down by osteoblastic cells on the differentiation of marrow stromal cells (MSCs) towards osteoblasts. Primary rat MSCs were harvested from bone marrow, cultured in dexamethasone containing medium and seeded directly onto the scaffolds. Constructs were grown in static culture for 12 days and then decellularized by rapid freeze-thaw cycling. Decellularized scaffolds were re-seeded with pre-cultured MSCs at a density of 2.5 x 10(5) cells/construct and osteogenicity was determined according to DNA, alkaline phosphatase, calcium and osteopontin analysis. DNA content was higher for cells grown on decellularized scaffolds with a maximum content of about 1.3 x 10(6) cells/construct. Calcium was deposited at a greater rate by cells grown on decellularized scaffolds than the constructs with only one seeding on day-16. The Ti/MSC constructs showed negligible calcium content by day-16, compared with 213.2 (+/- 13.6) microg/construct for the Ti/ECM/MSC constructs cultured without any osteogenic supplements after 16 days. These results indicate that bone-like ECM synthesized in vitro can enhance the osteoblastic differentiation of MSCs.     

In vitro osteogenic differentiation of marrow stromal cells encapsulated in biodegradable hydrogels

Novel hydrogel materials based on oligo(poly(ethylene glycol) fumarate) (OPF) crosslinked with a redox radical initiation system were recently developed in our laboratory as injectable cell carriers for orthopedic tissue engineering applications. The effect of OPF hydrogel material properties on in vitro osteogenic differentiation of encapsulated rat marrow stromal cells (MSCs) with and without the presence of osteogenic supplements (dexamethasone) was investigated. Two OPF formulations that resulted in hydrogels with different swelling properties were used to encapsulate rat MSCs (seeding density approximately 13 million cells/mL, samples 6 mm diameter x 0.5 mm thick before swelling) and osteogenic differentiation in these constructs over 28 days in vitro was determined via histology and biochemical assays for alkaline phosphatase, osteopontin and calcium. Evidence of MSC differentiation was apparent over the culture period for samples without dexamethasone, but there was large variability in calcium production between constructs using cells of the same source. Differentiation was also seen in samples cultured with osteogenic supplements, but calcium deposition varied depending on the source pool of MSCs. By day 28, osteopontin and calcium results suggested that, in the presence of dexamethasone, OPF hydrogels with greater swelling promoted embedded MSC differentiation over those that swelled less (43.7 +/- 16.5 microg calcium/sample and 16.4 +/- 2.8 microg calcium/sample, respectively). In histological sections, mineralized areas were apparent in all sample types many microns away from the cells. These experiments indicate that OPF hydrogels are promising materials for use as injectable MSC carriers and that hydrogel swelling properties can influence osteogenic differentiation of encapsulated progenitor cells.     

Flow perfusion culture of human fetal bone cells in large beta-tricalcium phosphate scaffold with controlled architecture

One unsolved problem in bone tissue engineering is how to enable the survival and proliferation of osteoblastic cells in large scaffolds. In this work, large beta-tricalcium phosphate scaffolds with tightly controlled channel architectures were fabricated and a custom-designed perfusion bioreactor was developed. Human fetal bone cells in third passage were seeded onto the scaffolds and cultured in static or flow perfusion conditions for up to 16 days. Compared with nonperfused constructs, flow perfused constructs demonstrated improved cells proliferation and differentiation according to cell viability, glucose consumption, alkaline phosphatase activity, and osteopontin. Moreover, after 16 days of perfusion culture, a homogenous layer composed of cells and mineralized matrix throughout the whole scaffold was observed by scanning electron microscopy and histological study. In contrast, cells were located only along the scaffold perimeter in static culture. These results demonstrated the feasibility and benefit of perfusion culture in conjunction with well-defined three-dimensional environment for large bone graft construction. Porous scaffold with controlled architecture can be a potential tool to evaluate the effects of scaffold specific geometry on fluid flow configuration and cell behavior under perfusion culture.     

Flow perfusion culture of human mesenchymal stem cells on coralline hydroxyapatite scaffolds with various pore sizes

Bone grafts are widely used in orthopaedic reconstructive surgery, but harvesting of autologous grafts is limited due to donor site complications. Bone tissue engineering is a possible alternative source for substitutes, and to date, mainly small scaffold sizes have been evaluated. The aim of this study was to obtain a clinically relevant substitute size using a direct perfusion culture system. Human bone marrowderived mesenchymal stem cells were seeded on coralline hydroxyapatite scaffolds with 200 μm or 500 μm pores, and resulting constructs were cultured in a perfusion bioreactor or in static culture for up to 21 days and analysed for cell distribution and osteogenic differentiation using histological stainings, alkaline phosphatase activity assay, and real-time RT-PCR on bone markers. We found that the number of cells was higher during static culture at most time points and that the final number of cells was higher in 500 μm constructs as compared with 200 μm constructs. Alkaline phosphatase enzyme activity assays and real time RT-PCR on seven osteogenic markers showed that differentiation occurred primarily and earlier in statically cultured constructs with 200 μm pores compared with 500 μm ones. Adhesion and proliferation of the cells was seen on both scaffold sizes, but the vitality and morphology of cells changed unfavorably during perfusion culture. In contrast to previous studies using spinner flask that show increased cellularity and osteogenic properties of cells when cultured dynamically, the perfusion culture in our study did not enhance the osteogenic properties of cell/scaffold constructs. The statically cultured constructs showed increasing cell numbers and abundant osteogenic differentiation probably because of weak initial cell adhesion due to the surface morphology of scaffolds. Our conclusion is that the specific scaffold surface microstructure and culturing system flow dynamics has a great impact on cell distribution and proliferation and on osteogenic differentiation, and the data presented warrant careful selection of in vitro culture settings to meet the specific requirements of the scaffolds and cells, especially when natural biomaterials with varying morphology are used.     

Influence of the porosity of starch-based fiber mesh scaffolds on the proliferation and osteogenic differentiation of bone marrow stromal cells cultured in a flow perfusion bioreactor

This study investigates the influence of the porosity of fiber mesh scaffolds obtained from a blend of starch and poly(epsilon-caprolactone) on the proliferation and osteogenic differentiation of marrow stromal cells cultured under static and flow perfusion conditions. For this purpose, biodegradable scaffolds were fabricated by a fiber bonding method into mesh structures with two different porosities-- 50 and 75%. These scaffolds were then seeded with marrow stromal cells harvested from Wistar rats and cultured in a flow perfusion bioreactor or in 6-well plates for up to 15 days. Scaffolds of 75% porosity demonstrated significantly enhanced cell proliferation under both static and flow perfusion culture conditions. The expression of alkaline phosphatase activity was higher in flow cultures, but only for cells cultured onto the higher porosity scaffolds. Calcium deposition patterns were similar for both scaffolds, showing a significant enhancement of calcium deposition on cellscaffold constructs cultured under flow perfusion, as compared to static cultures. Calcium deposition was higher in scaffolds of 75% porosity, but this difference was not statistically significant. Observation by scanning electron microscopy showed the formation of pore-like structures within the extracellular matrix deposited on the higher porosity scaffolds. Fourier transformed infrared spectroscopy with attenuated total reflectance and thin-film X-ray diffraction analysis of the cell-scaffold constructs after 15 days of culture in a flow perfusion bioreactor revealed the presence of a mineralized matrix similar to bone. These findings indicate that starch-based scaffolds, in conjunction with fluid flow bioreactor culture, minimize diffusion constraints and provide mechanical stimulation to the marrow stromal cells, leading to enhancement of differentiation toward development of bone-like mineralized tissue. These results also demonstrate that the scaffold structure, namely, the porosity, influences the sequential development of osteoblastic cells and, in combination with the culture conditions, may affect the functionality of tissues formed in vitro.     

Development of custom-built bone scaffolds using mesenchymal stem cells and apatite-wollastonite glass-ceramics

There is a clinical need for new bone replacement materials that combine long implant life with complete integration and appropriate mechanical properties. We have used human mesenchymal stem cells (MSCs) to populate porous apatite-wollastonite (A-W) glass-ceramic scaffolds produced by the layer manufacturing technique, selective laser sintering, to create custom-built bone replacements. Confocal and scanning electron microscopy were used to determine optimal seeding densities and to demonstrate that MSCs adhered and retained viability on the surface of A-W scaffolds over a culture period of 21 days. We found a significant increase in the number of MSCs growing on the scaffolds over 7 days. Using bromodeoxyuridine incorporation we demonstrated that MSCs proliferated on the scaffolds. Using real-time PCR we analyzed the expression of the osteogenic markers alkaline phosphatase, collagen type-I, Cbfa-1, osteocalcin, osteonectin, and osteopontin by MSCs cultured in the absence of osteogenic supplements. The expression of the osteogenic markers by MSCs was equivalent to or significantly greater on A-W scaffolds than on tissue culture plastic. We also identified significantly higher alkaline phosphatase activity on A-W compared to a commercial calcium phosphate scaffold. These results indicate for the first time the biocompatibility and osteo-supportive capacity of A-W scaffolds and their potential as patient-specific bone replacement materials.     

Bone Tissue Engineering Using Human Mesenchymal Stem Cells: Effects of Scaffold Material and Medium Flow

We report studies of bone tissue engineering using human mesenchymal stem cells (MSCs), a protein substrate (film or scaffold; fast degrading unmodified collagen, or slowly degrading cross-linked collagen and silk), and a bioreactor (static culture, spinner flask, or perfused cartridge). MSCs were isolated from human bone marrow, characterized for the expression of cell surface markers and the ability to undergo chondrogenesis and osteogenesis in vitro, and cultured for 5 weeks. MSCs were positive for CD105/endoglin, and had a potential for chondrogenic and osteogenic differentiation. In static culture, calcium deposition was similar for MSC grown on collagen scaffolds and films. Under medium flow, MSC on collagen scaffolds deposited more calcium and had a higher alcaline phosphatase (AP) activity than MSC on collagen films. The amounts of DNA were markedly higher in constructs based on slowly degrading (modified collagen and silk) scaffolds than on fast degrading (unmodified collagen) scaffolds. In spinner flasks, medium flow around constructs resulted in the formation of bone rods within the peripheral region, that were interconnected and perpendicular to the construct surface, whereas in perfused constructs, individual bone rods oriented in the direction of fluid flow formed throughout the construct volume. These results suggest that osteogenesis in cultured MSC can be modulated by scaffold properties and flow environment.     

Flow perfusion culture of human mesenchymal stem cells on silicate-substituted tricalcium phosphate scaffolds

Autologous bone grafts are currently the gold standard for treatment of large bone defects, but their availability is limited due to donor site morbidity. Different substitutes have been suggested to replace these grafts, and this study presents a bone tissue engineered alternative using silicate-substituted tricalcium phosphate (Si-TCP) scaffolds seeded with human bone marrow-derived mesenchymal stem cells (hMSC). The cells were seeded onto the scaffolds and cultured either statically or in a perfusion bioreactor for up to 21 days and assessed for osteogenic differentiation by alkaline phosphatase activity assays and by quantitative real-time RT-PCR on bone markers. During culture, cells from the flow cultured constructs demonstrated improved proliferation and osteogenic differentiation verified by a more pronounced expression of several bone markers, e.g. alkaline phosphatase, osteopontin, Runx2, bone sialoprotein II, and bone morphogenetic protein 2. Cells and matrix were distributed homogeneously throughout the entire scaffold in flow culture, whereas only a peripheral layer was obtained after static culture. A viable and homogenous ex vivo bone construct with superior osteogenic properties was produced in dynamic culture and may provide a replacement for autologous grafts.     

Collagen three-dimensional hydrogel matrix carrying basic fibroblast growth factor for the cultivation of mesenchymal stem cells and osteogenic differentiation

Three-dimensional (3D) collagen hydrogels have been extensively used for cell culture experiments and are more closely representative of in vivo conditions than monolayer (2D) culture. Here we cultured rat bone marrow-derived mesenchymal stem cells (MSCs) in collagen hydrogels containing varying concentrations of basic fibroblast growth factor (bFGF) to examine the effect of bFGF on MSC proliferation and osteogenic differentiation in 3D culture. The optimal bFGF concentration that promoted the greatest degree of cell proliferation and expression of the early osteogenic induction marker alkaline phosphatase was also determined. Subsequent quantitative real-time polymerase chain reaction analysis of gene expression demonstrated that bFGF promoted significant upregulation of the bone-related genes: collagen type I, osteopontin (OPN), bone sialoprotein (BSP), and osteocalcin (OCN) for periods of up to 21 days. Immunofluorescence staining and fluorescence-activated cell sorting analysis further supported the enhanced osteogenic differentiation of cells as a greater proportion of cells were found to express OPN. Matrix mineralization within the collagen hydrogels was enhanced in the presence of bFGF, as assessed by calcium detection using von Kossa staining. These results clearly demonstrate a positive effect of bFGF on proliferation and osteogenic induction of MSCs in 3D collagen hydrogels when applied at the appropriate concentration. Moreover, collagen hydrogel constructs containing MSCs and appropriate growth factor stimulus might be a potentially useful biological tool for 3D bone tissue engineering.     

Osteogenic induction of human periodontal ligament fibroblasts under two- and three-dimensional culture conditions

Human periodontal ligament fibroblasts (hPDLF) play a key role in the regeneration of periodontal compartment during guided tissue regeneration procedures. This property is attributed to the progenitor cell subsets residing in the area. The aim of this study was to investigate whether hPDLFs could undergo an osteogenic differentiation under two- and three-dimensional (2D and 3D) culture conditions upon osteogenic induction. hPDLFs were isolated from six healthy donors, cultured, and expanded according to standard protocols. Then, three osteogenic culture conditions (dexamethasone, ascorbic acid, and beta-glycerophosphate) were established: 1) 2D culture as single-cell monolayer, 2) 3D-static culture on mineralized poly(DL-lactic-co-glycolic acid) (PLGA) scaffold, and 3) 3D culture on mineralized PLGA scaffold inside the NASA-approved bioreactor stimulating microgravity conditions. After 21 days of osteogenic induction, the majority of monolayer cultures had undergone differentiation toward osteogenic lineage, as indicated by morphological changes, mineralization assay, and some phenotypical properties. However, immunohistochemistry revealed that the scaffold cultures expressed higher levels of osteogenic marker proteins compared with that of the monolayers. Secondly, hPDLF-PLGA constructs in bioreactor showed an increased expression of osteopontin and osteocalcin compared with that of static 3D culture after 21 days. Results indicate that human periodontal ligament contains a subpopulation of cells capable of undergoing osteogenic differentiation and presumably contributing to regeneration of bone defects in the adjacent area. Human PDLF-seeded mineralized PLGA scaffold in microgravity bioreactor may be used to support osteogenic differentiation in vitro. Thus, this system may offer new potential benefits as a tool for periodontal tissue engineering.     

Osteogenic differentiation of bone marrow stromal cells on poly(ε-caprolactone) nanofiber scaffolds

Nanofiber poly(ε-caprolactone) (PCL) scaffolds were fabricated by electrospinning, and their ability to enhance the osteoblastic behavior of marrow stromal cells (MSCs) in osteogenic media was investigated. MSCs were isolated from Wistar rats and cultured on nanofiber scaffolds to assess short-term cytocompatibility and long-term phenotypic behavior. Smooth PCL substrates were used as control surfaces. The short-term cytocompatibility results indicated that nanofiber scaffolds supported greater cell adhesion and viability compared with control surfaces. In osteogenic conditions, MSCs cultured on nanofiber scaffolds also displayed increased levels of alkaline phosphatase activity for 3 weeks of culture. Calcium phosphate mineralization was substantially accelerated on nanofiber scaffolds compared to control surfaces as indicated through von Kossa and calcium staining, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Increased levels of intra- and extracellular levels of osteocalcin and osteopontin were observed on nanofiber scaffolds using immunofluorescence techniques after 3 weeks of culture. These results demonstrate the enhanced tissue regeneration property of nanofiber scaffolds, which may be of potential use for engineering osteogenic scaffolds for orthopedic applications.     

Osteogenic differentiation of human mesenchymal stem cells on chargeable polymer-modified surfaces

Polystyrene cell-culture plates modified with positively charged polyallylamine (PAAm) and negatively charged poly(acrylic acid) (PAAc) and unmodified plate were used for the culture of human mesenchymal stem cells (MSCs) to study the effect of surface electrostatic properties on their osteogenic differentiation. All of these surfaces supported cell adhesion and proliferation. However, the cells adhered, spread, and proliferated somewhat more quickly on the PAAm-modified surface than they did on the PAAc-modified and control surfaces. Osteogenic differentiation was examined by alkaline phosphatase (ALP) staining, alizarin red S staining, and gene-expression analysis. The MSCs cultured on the three kinds of surfaces in the presence of dexamethasone were positively stained with ALP and alizarin red S staining, while the cells cultured without dexamethasone were not positively stained. Gene-expression analyses using real-time PCR indicated that MSCs cultured on these surfaces in the presence of dexamethasone expressed osteogenic marker genes, encoding ALP, osteocalcin, bone sialoprotein, osteopontin, and type I collagen. These results indicate that the positively charged, negatively charged, and unmodified surfaces supported osteogenic differentiation, and that their effect required the synergistic effect of dexamethasone.     

Flow Perfusion Co-culture of Human Mesenchymal Stem Cells and Endothelial Cells on Biodegradable Polymer Scaffolds

In this study, we investigated the effect of flow perfusion culture on the mineralization of co-cultures of human umbilical vein endothelial cells (HUVECs) and human mesenchymal stem cells (hMSCs). Osteogenically precultured hMSCs were seeded onto electrospun scaffolds in monoculture or a 1:1 ratio with HUVECs, cultured for 7 or 14 days in osteogenic medium under static or flow perfusion conditions, and the resulting constructs were analyzed for cellularity, alkaline phosphatase (ALP) activity and calcium content. In flow perfusion, constructs with monocultures of hMSCs demonstrated higher cellularity and calcium content, but lower ALP activity compared to corresponding static controls. ALP activity was enhanced in co-cultures under flow perfusion conditions, compared to hMSCs alone; however unlike the static controls, the calcium content of the co-cultures in flow perfusion was not different from the corresponding hMSC monocultures. The data suggest that co-cultures of hMSCs and HUVECs did not contribute to enhanced mineralization compared to hMSCs alone under the flow perfusion conditions investigated in this study. However, flow perfusion culture resulted in an enhanced spatial distribution of cells and matrix compared to static cultures, which were limited to a thin surface layer.     

Bone augmentation by bone marrow mesenchymal stem cells cultured in three-dimensional biodegradable polymer scaffolds

Poly-lactic-glycolic acid (PLGA) is a biocompatible as well as biodegradable polymer and used in various medical applications. In this study, we evaluated efficiency of the specially designed three-dimensional porous PLGA as a scaffold for bone augmentation. First, cell attachment/proliferation, differentiation, and mineralization of Fisher 344 rat marrow mesenchymal stem cells (MSCs) cultured on the PLGA scaffold were analyzed. Viable MSCs were impregnated into pore areas of the scaffold and a moderate increase of DNA contents was seen. High alkaline phosphatase, osteocalcin content, and calcium content of MSCs in PLGA scaffolds under osteogenic differentiation conditions were seen after 14 or 21 days of culture. Subsequently, we implanted the PLGA/MSCs composites on rat calvaria bone for 30 days. Newly formed bone was seen in only the composite PLGA/MSCs implantation group, which had been precultured under osteogenic condition. We also demonstrated that the newly formed bone originated from the donor composites. These results demonstrate that the three-dimensional PLGA scaffold can support osteogenic differentiation of MSCs, and the scaffold combined with osteogenic MSCs can be used for in vivo bone tissue augmentation.     

Modulation of differentiation and mineralization of marrow stromal cells cultured on biomimetic hydrogels modified with Arg-Gly-Asp containing peptides

We synthesized biomimetic hydrogels modified with an osteopontin-derived peptide (ODP) and used them as a substrate for in vitro culture of marrow stromal cells (MSCs) to investigate the effect of the biomimetic surface on differentiation of MSCs into osteoblasts. Proliferation and biological assays for 16 days proved that MSCs became differentiated into osteoblasts secreting osteogenic phenotypic markers such as alkaline phosphatase (ALP), osteopontin, and mineralized calcium. In addition, there was an additive effect of the cell-binding peptide on differentiation and mineralization of MSCs cultured in the presence of soluble osteogenic supplements in cell culture media. For example, calcium content at day 16 on peptide-modified hydrogels was significantly higher than on tissue culture polystyrene. Two general trends were observed: (1) proliferation of MSCs decreased as the amount of differentiation markers increased, and (2) higher peptide concentrations accelerated the differentiation of MSCs. On the hydrogel modified with ODP, ALP activity exhibited a maximum value of 36.7 +/- 4.2 pmol/cell/h at day 10 for the concentration of 2 micromol/g while the culture time needed for maximum ALP activity occurred on day 13 for the lower concentrations. On the same hydrogel, the calcium content at day 10 was 21.4 +/- 2.3 ng/cell for the peptide concentration of 2 micromol/g and 1.0 +/- 0.3 ng/cell for 1.0 micromol/g. We used Gly-Arg-Gly-Asp-Ser (GRGDS) for modification of the hydrogel as a comparison to the results with ODP. However, osteoblast development was not significantly affected by the nature of the binding peptide sequences. These results suggest that MSC function can be modulated by variation of the peptide concentration in biomimetic hydrogels used for scaffold-based bone tissue engineering.     

Effect of flow perfusion on the osteogenic differentiation of bone marrow stromal cells cultured on starch-based three-dimensional scaffolds

This study aims to investigate the effect of culturing conditions (static and flow perfusion) on the proliferation and osteogenic differentiation of rat bone marrow stromal cells seeded on two novel scaffolds exhibiting distinct porous structures. Specifically, scaffolds based on SEVA-C (a blend of starch with ethylene vinyl alcohol) and SPCL (a blend of starch with polycaprolactone) were examined in static and flow perfusion culture. SEVA-C scaffolds were formed using an extrusion process, whereas SPCL scaffolds were obtained by a fiber bonding process. For this purpose, these scaffolds were seeded with marrow stromal cells harvested from femoras and tibias of Wistar rats and cultured in a flow perfusion bioreactor and in 6-well plates for 3, 7, and 15 days. The proliferation and alkaline phosphatase activity patterns were similar for both types of scaffolds and for both culture conditions. However, calcium content analysis revealed a significant enhancement of calcium deposition on both scaffold types cultured under flow perfusion. This observation was confirmed by Von Kossa-stained sections and tetracycline fluorescence. Histological analysis and confocal images of the cultured scaffolds showed a much better distribution of cells within the SPCL scaffolds than the SEVA-C scaffolds, which had limited pore interconnectivity, under flow perfusion conditions. In the scaffolds cultured under static conditions, only a surface layer of cells was observed. These results suggest that flow perfusion culture enhances the osteogenic differentiation of marrow stromal cells and improves their distribution in three-dimensional, starch-based scaffolds. They also indicate that scaffold architecture and especially pore interconnectivity affect the homogeneity of the formed tissue.