桡骨远端不稳定骨折掌侧或背侧内固定的选择

目的 探讨T型钢板在治疗桡骨远端不稳定骨折中的应用及对治疗效果的影响。方法 根据桡骨远端不稳定骨折的特点,就不同类型骨折分别采用T型钢板掌侧或背侧固定,对于骨皮质破坏较严重,支撑不满意的病例,通过植入人工骨或自体骨来恢复局部的稳定性。结果 本组64例病例,经手术复位,纠正畸形满意,术后2～3d开始指导下的功能训练。平均随访时间29．63个月,总体优良率达90．77％。其中,55侧行掌侧固定(其中30侧为桡骨远端骨折向背侧移位),优良率达92．72％;伤后6周以上陈旧骨折或损伤情况估计从掌侧入路有困难的患者,采用背侧入路钢板固定,优良率为77．77％。结论 桡骨远端骨折向掌侧移位的病例,掌侧入路是理想的方式,对于向背侧移位的病例(Colles骨折),同样也具有良好的手术效果。桡骨远端掌侧切口治疗桡骨远端不稳定骨折具有：骨床平坦,易操作,符合张力带原则,软组织破坏相对较少,维持背侧软组织合页的完整性,植骨不易外漏等优点。掌侧入路钢板固定对于桡骨远端不稳定骨折的治疗效果是满意的,特别是对新鲜骨折;陈旧骨折在6周以内有条件仍可从掌侧入路,并疗效满意。背侧入路钢板固定,治疗效果稍差,背侧截骨后植骨的患者,对功能恢复有一定影响。     

Volar versus dorsal plating in the management of intra-articular distal radius fractures

PURPOSE: To compare the complications and functional and radiographic outcomes of volar and dorsal plating of intra-articular distal radius fractures. METHODS: This retrospective review included 34 patients found by searching a database of 350 patients treated for distal radius fractures. Inclusion criteria were (1) at least 1 year of follow-up data and (2) open reduction and internal fixation of a multifragmentary fragment intra-articular distal radius fracture with either a nonlocking volar or dorsal plate. Twenty patients were treated with a dorsal plate and 14 patients were treated with a volar nonlocking plate. Objective and subjective outcome parameters were compared between the 2 groups. Objective evaluations included wrist range of motion, grip strength, and preoperative and postoperative radiographic parameters (radial inclination, palmar tilt, ulnar variance, fracture pattern). Subjective evaluations were performed using the Disabilities of the Arm, Shoulder, and Hand (DASH) questionnaire score and the Gartland and Werley score. RESULTS: Volar plating resulted in a significantly better Gartland-Werley score compared with dorsal plating. There were no significant differences in the DASH score.Volar collapse was documented in 5 of the 20 patients in the dorsal plating group, which resulted in a mild loss of pronation compared with the volar plating group. No collapse occurred in the volar plating group. In addition the difference in the percentage of wrist range of motion compared with the contralateral wrist was not significant. Dorsal plating was associated with a ruptured extensor indicis tendon in 1 patient; secondary surgical procedures were required in 4 patients (tenolyses and radial styloidectomy). Volar plating was associated with median nerve neuropathy in 2 patients and intersection syndrome in one. CONCLUSIONS: Although both groups of patients had similar DASH scores the functional outcome in terms of Gartland and Werley scores was better in the volar plating group. In addition there was a higher rate of volar collapse and late complications in the dorsal plating group compared with the volar plating group. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level III.     

掌侧锁定接骨板联合背侧钛网内固定治疗桡骨远端关节面粉碎性骨折

背景:桡骨远端关节面骨折常需要手术治疗,单纯采用掌侧锁定接骨板入路难以复位背侧关节面或骨碎块。目的:探讨应用掌侧锁定接骨板联合背侧钛网内固定治疗桡骨远端关节面粉碎性骨折的疗效。方法:回顾性分析2007年2月至2011年1月我院收治的23例(男9例,女14例)Barton氏骨折,患者行掌背侧联合内固定手术,术后分别采用Stewart改良的Sarmiento评分方法行影像学评估,Fernandez评分标准进行腕关节功能评分。结果:23例患者获得8~12个月随访,平均10个月,影像学评定,优16例,良4例,可3例。腕关节功能评分,优17例,良4例,可2例。结论:该手术方法治疗Barton氏骨折可有效防止复位丢失、避免肌腱磨损、实现早期功能锻炼。     

Arthroscopic assessment of intra-articular distal radius fractures after open reduction and internal fixation from a volar approach

PURPOSE: The volar approach with locked plating is a common treatment for intra-articular distal radius fractures. The purpose of this study was to arthroscopically assess the articular surface after internal fixation through the volar approach as a means to evaluate the ability of an extra-articular reduction to anatomically restore the joint surface. METHODS: Sixteen patients with intra-articular distal radius fractures were prospectively enrolled. A volar approach and internal fixation using a locked volar plate was performed. Using a visual analog scale (VAS), the fracture reduction was clinically graded on the quality of reduction of the visible metaphyseal fracture lines, fluoroscopically graded, and arthroscopic graded. Maximum step and gap deformity were recorded from arthroscopy and plain radiograph. RESULTS: The mean VAS score for the fracture reduction based on extra-articular fracture lines was 7.4. The mean VAS score for the fluoroscopic reduction was 8.2. The mean VAS score for the arthroscopic reduction was 6.4. The arthroscopic VAS score was significantly lower than the VAS score for fluoroscopy but was not significantly different than the VAS score for metaphyseal reduction. Mean arthroscopic measurement of maximum step and gap deformity were 1 mm and 2 mm, respectively. Mean postoperative radiographic maximum step and gap deformity were both less than 1 mm. The arthroscopic step and gap deformities were significantly greater than the radiographic deformities. CONCLUSIONS: A volar approach, indirect reduction, and locked plate fixation is a useful technique in restoring articular congruity after distal radius fracture. The number of fracture lines and presence of step and gap deformity can be adequately assessed using clinical and fluoroscopic assessment. However, the magnitude of step and gap deformity may be underestimated.     

Volar Barton's fractures with concomitant dorsal fracture in older patients

PURPOSE: To describe a variant of Barton's volar articular shearing fracture of the distal radial articular surface with a subtle concomitant fracture of the dorsal metaphyseal cortex. METHODS: This fracture pattern was observed in 6 women and 2 men with an average age of 67 years (range, 58-76 years). All 8 patients were treated with a volar plate and screws. The dorsal metaphyseal fracture was not recognized in 5 patients and a volar buttress plating technique using an intentionally undercontoured volar plate was used. In 3 patients the dorsal fracture line was identified before surgery and the plate was contoured to fit the volar surface of the distal radius. RESULTS: All 5 patients treated with an undercontoured plate had loss of the normal palmar tilt of the distal radius (average,-9.4 degrees; range, 0 degrees to-22 degrees ) and dorsal translation of the distal radial articular fragments. For the entire group the palmar tilt averaged-5.9 degrees (range, 0.0 degrees to-22.0 degrees ), the ulnar inclination 19 degrees (range, 10 degrees -23 degrees ), and the ulnar variance-0.9 mm (range, 0.0 to-3.0 mm). All patients attained forearm supination of 80 degrees and the average pronation was 75 degrees (range, 45 degrees -80 degrees ). According to Sarmiento's modification of the system of Gartland and Werley there were 1 excellent, 6 good, and 1 fair results. The average Patient-Rated Wrist Evaluation score was 16 (range, 0-35). CONCLUSIONS: Some fractures with an oblique volar marginal articular fracture of the distal radius and volar radiocarpal subluxation (known as Barton's fracture) may also have a fracture through the dorsal metaphyseal cortex. Failure to identify this fracture line can lead to dorsal translation and angulation of the distal radius articular surface, particularly when an undercontoured volar plate is used for internal fixation.     

Volar approach to distal radius fractures

The volar approach to the distal radius fracture is an important exposure in the treatment of these fractures, particularly with the growing enthusiasm for fixed-angle volar plating. With reports in the literature documenting complications associated with external fixation and dorsal plating, the volar approach has become ever more popular. Moreover, advancements in locking plate technology have expanded the indications for palmar plating beyond volar shear and volarly displaced fractures to include unstable intra-articular distal radius fractures. The surgical approach remains the same as when Henry recommended the interval between the flexor carpi radialis and the radial artery. Critical elements of the surgical technique include releasing the brachioradialis, gaining exposure all the way to the sigmoid notch, and building the intra-articular reduction, beginning with the intermediate column and moving radially. The relevant anatomy, indications and contraindications, postoperative care, and a pertinent case presentation are discussed.     

Volar versus dorsal fixed-angle fixation of dorsally unstable extra-articular distal radius fractures: a biomechanic study

PURPOSE: To evaluate and compare the biomechanic rigidity and strength of 3 fixed-angle plates used to treat extra-articular distal radius fractures that are dorsally unstable. Volar fixed-angle plates were compared with a dorsal fixed-angle nail plate. METHODS: Three plate constructs were tested: the dorsal nail plate (DNP), distal volar radius (DVR) plate, and locking compression plate (LCP) volar distal radius plate. With anatomic, third-generation, artificial composite radii, dorsally unstable extra-articular distal radius fracture models were made by cutting a wedge osteotomy with an 8-mm dorsal gap 1 cm from the articular surface. These models were then fixed with the 3 implants by the method recommended by the manufacturer. The proximal radii of each specimen were attached to the base of a materials testing machine with a probe centered at the radial side of the lunate fossa. The specimens were loaded at a constant rate to failure under axial compression. Load and displacement were plotted graphically, and the resulting rigidities and strengths of each plate were assessed statistically. RESULTS: The DVR group had significantly greater stiffness than the LCP group. The DVR group had significantly higher maximum loads than both the DNP and LCP groups. There were no significant differences in yield loads. Both the DNP and DVR groups had significantly less displacement at yield than the LCP group. CONCLUSIONS: These 3 groups had similar yield loads. However, the LCP was less stiff than the DVR and had more displacement at yield than both the DVR and DNP. The yield load of all 3 implants was much higher than previously described loads for active wrist and finger motion.     

Dorsal Wrist Extrinsic Carpal Ligament Injury Exacerbates Volar Radiocarpal Instability After Intra-Articular Distal Radius Fracture

Background: Volar radiocarpal instability is often seen after loss of fixation of volar lunate facet fragments. The pathogenesis of post-traumatic volar radiocarpal instability is poorly understood. The purpose of this study was to determine if injury to the dorsal wrist extrinsic carpal ligaments contributes to volar radiocarpal instability. Methods: Six matched pairs of cadaveric upper extremities were tested using a dynamic hand testing system. In group 1, the intact wrist, the wrist with a volar lunate facet fracture, and the fractured wrist after 500 cycles of grip were tested. In group 2, in addition to the intact and fractured wrist, the fractured wrist with the dorsal extrinsic carpal ligaments cut and the fractured wrist with the dorsal extrinsic carpal ligaments cut after 500 cycles of grip were also tested. Volar-dorsal displacement of the lunate was measured from 45° wrist flexion to 45° wrist extension in 22.5° increments with the wrist flexors/extensors loaded for each condition. Results: Volar lunate translation did not significantly increase after the volar lunate facet fracture alone, and was not evident to a significant extent until the dorsal wrist extrinsic carpal ligaments were cut. Further instability of the lunate occurred after grip cycling only with the dorsal extrinsic capsular ligaments cut. Conclusions: Injury to the dorsal wrist extrinsic carpal ligaments exacerbates volar radiocarpal instability. Unrecognized dorsal sided injury may be a contributing factor to why stable fixation of volar lunate facet fragments remains problematic after volar plating of intra-articular distal radius fractures with displaced volar lunate facet fragments.     

The volar extension of the lunate facet of the distal radius: a quantitative anatomic study

PURPOSE: To describe quantitatively the protrusion of the volar part of the lunate facet of the distal radius articular surface anterior to the volar metaphyseal cortex, which is susceptible to fracture and can be difficult to control with plates and screws alone. METHODS: Quantitative anatomic measurements of 48 3-dimensional computed tomography scans of the distal radius were analyzed to quantify the anatomy of the volar part of the lunate facet of the distal radius. The measurements were scaled to account for overall bone size. Male and female anatomies were compared. RESULTS: The height and width of the volar extension of the lunate facet were 3 +/- 1 mm and 19 +/- 4 mm, respectively. The mean height of the lunate facet was 19 +/- 3 mm. An average of 16% of the lunate facet projects anterior to the flat volar surface of the distal radius. The thickness of the volar extension of the lunate facet averaged 5 +/- 1 mm. There were no statistically significant differences between men and women for any of the scaled measurements. CONCLUSIONS: The observation that the volar lunate facet projects approximately 3 mm (or 16% of the dorsal-volar height of the lunate facet) anterior to the flat volar surface of the distal radius and is approximately 5 mm thick helps explain its relative vulnerability to injury and the difficulty encountered when trying to secure it with a plate and screws.     

Open reduction and internal locked fixation of unstable distal ulna fractures with concomitant distal radius fracture

PURPOSE: To evaluate the results following locking plate fixation of unstable distal ulna fractures with concomitant distal radius fracture. METHODS: A retrospective review was conducted to identify patients who had been treated with a locking plate for unstable displaced fractures of the distal ulna in which a concomitant ipsilateral distal radius fracture was also treated operatively. Medical records and radiographs were reviewed, and 5 patients were identified with an average age of 52 years (range, 47-61 years) and with follow-up averaging 11.6 months (range, 6-17 months). There were 2 open and 3 closed fractures. Included was 1 simple neck, 1 comminuted neck, 1 head, and 2 head and neck fractures of the distal ulna. All distal radius fracture implants were locked volar plates. RESULTS: All distal ulna and distal radius fractures united, and the average motion was: flexion 59 degrees ; extension 59 degrees ; pronation 67 degrees ; and supination 72 degrees . Average grip strength was 97% of the opposite extremity. Final ulnar variance averaged -0.4 mm (ulnar negative), radial inclination was 20 degrees , and volar tilt was 8 degrees . All distal radioulnar joints were stable. Two patients had mild, transient paresthesias of the dorsal sensory branch of the ulnar nerve, and both patients recovered completely within 3 months. There were no subsequent surgeries or hardware failures. There were no infections and no wound problems. Based upon the Sarmiento modification of the Gartland and Werley rating score, there were 4 excellent results and 1 good result. CONCLUSIONS: Locked plating of unstable distal ulna fractures, in the setting of an associated distal radius fracture, resulted in union, good to excellent alignment and motion, nearly symmetric grip strength, and minimal transient morbidity.     

Technical tips for (dry) arthroscopic reduction and internal fixation of distal radius fractures

Contrary to general belief, arthroscopic assisted reduction in distal radius fractures can be done in an expeditious manner and with minimal consumption of operating room resources. This article presents the steps for a pleasant arthroscopic experience in detail. The technique proposed combines the benefits of rigid fixation with volar locking plates (for the extra-articular component) and arthroscopic control of the reduction (for the articular component). It is important that the operation be carried out using the dry arthroscopic technique. However, arthroscopy is just an addition to conventional methods. Thorough knowledge of and facility with classic techniques of distal radius fracture treatment is essential for a good result.     

Functional outcome and complications after volar plating for dorsally displaced, unstable fractures of the distal radius

PURPOSE: Despite the recent popularity of volar plating for dorsally displaced distal radius fractures there is a paucity of data documenting the results of this treatment method. The purpose of this study was to determine the functional outcome of patients treated with volar fixed-angle plating for dorsally displaced, unstable distal radius fractures. METHODS: We reviewed the records of all patients treated at our institution with internal fixation using volar plates for dorsally displaced, comminuted distal radius fractures. Patients with follow-up periods shorter than 12 months were excluded from the study. Outcomes were evaluated at the latest follow-up examination with the Disabilities of the Arm, Shoulder, and Hand and the Gartland and Werley scoring systems. RESULTS: We studied 41 patients with a mean age of 53 years. The average follow-up period was 17 months. All fractures were stabilized with volar locking plates. Radiographs in the immediate postoperative period showed a mean radial height of 11 mm, mean radial inclination of 21 degrees , and mean volar tilt of 4 degrees. At fracture healing the mean radial height was 11 mm, mean radial inclination was 21 degrees, and mean volar tilt was 5 degrees. The average score on the Disabilities of the Arm, Shoulder, and Hand questionnaire was 14 and all patients achieved excellent and good results on the Gartland and Werley scoring system, indicating minimal impairment in activities of daily living. Nine patients experienced postoperative complications. There were 4 instances of loss of reduction with fracture collapse, 3 patients required hardware removal for tendon irritation, 1 patient developed a wound dehiscence, and 1 patient had metacarpophalangeal joint stiffness. CONCLUSIONS: Patients with unstable, dorsally displaced fractures of the distal radius treated with volar fixed-angle devices have good or excellent functional outcomes despite a high complication rate. When compared with previous reports on dorsal plating volar plates appear to have a higher incidence of fracture collapse but a lower rate of hardware-related complications. Complex fracture patterns thus mandate a careful and individualized approach. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic, Level III.     

Intraoperative evaluation of DRUJ instability through dorsal stress radiography in distal radius fractures

IntroductionCertain type of injury of the triangular fibrocartilage complex associated with distal radius fracture can result in distal radioulnar joint instability (DRUJ). Untreated DRUJ instability may lead to poor result in the treatment of acute distal radius fractures. The aim of this study was to evaluate DRUJ instability in distal radius fractures through dorsal stress radiography comparing the affected and unaffected wrists intraoperatively.Materials and methods49 patients with a distal radius fracture who were operatively treated with a volar locking plate were included. Dorsal stress radiography was used to evaluate both affected and unaffected wrists peri-operatively to detect DRUJ instability. Under general anesthesia, a dorsal stress test was performed on the unaffected wrist. Additionally, after fixation of the affected wrist, a dorsal stress test was performed. The ulnar translation ratio (UTR) was measured through the dorsal stress radiograph. Arthroscopic examination was performed on all affected wrists according to Palmer's and Atzei classification.ResultsThe UTR of the affected wrist and the TFCC injury Palmer-type IB tendency were positively correlated (odds ratio: 1.18, p-value: 0.002). Additionally, as the UTR difference between the affected and unaffected wrists enlarged, it revealed a significant DRUJ instability tendency due to Palmer-type IB TFCC injury (p-value: 0.000006, Wilcoxon rank-sum test).ConclusionsDorsal stress radiography is a reliable, simple procedure to evaluate DRUJ instability intraoperatively. UTR value from dorsal stress radiography could be useful for evaluating DRUJ instability associated with distal radius fracture.     

Two peg spade plate for distal radius fractures: A novel technique

Background:

The management of distal radius fractures raises considerable debate among orthopedic surgeons. The amount of axial shortening of the radius correlates with the functional disability after the fracture. Furthermore, articular incongruity has been correlated with the development of arthritis at the radiocarpal joint. We used two peg volar spade plate to provide a fixed angle subchondral support in comminuted distal radius fractures with early mobilization of the joint.

Materials and Methods:

Forty patients (26 males and 14 females) from a period between January 2009 and December 2011 were treated with two peg volar spade plate fixation for distal radius fracture after obtaining reduction using a mini external fixator. Patients were evaluated using the demerit point system of Gartland and Werley and Sarmiento modification of Lindstrom criteria at final followup of 24 months.

Results:

The average age was 43.55 years (range 23-57 years). Excellent to good results were seen in 85% (n = 34) and in all patients when rated according to the demerit point system of Gartland and Werley and Sarmiento modification of Lindstrom criteria, respectively. Complications observed were wrist stiffness in 5% (n = 2) and reflex sympathetic dystrophy in 2.5% (n = 1).

Conclusions:

The two peg volar spade plate provides a stable subchondral support in comminuted intraarticular fractures and maintains reduction in osteoporotic fractures of the distal radius. Early mobilization with this implant helps in restoring wrist motion and to prevent development of wrist stiffness.     

Rupture of the flexor pollicis longus tendon after volar fixed-angle plating of a distal radius fracture: a case report

We report a case of complete rupture of the flexor pollicis longus tendon 13 months after volar fixed-angle plating of a distal radius fracture. Tendon disruption was associated with a prominent distal volar lip of the plate. The plate was placed at the volar distal lip of the radius, at the location recommended by the manufacturer. Most previous reports of flexor tendon ruptures after volar plating of distal radius fractures have been in improperly placed plates, custom-made plates that were later taken off the market, or in physiologically abnormal tendons. This may be a unique case of flexor pollicis longus rupture with a currently commercially available volar fixed-angle plate, placed at the site recommended by the manufacturer, in a patient without other predisposition to tendon rupture.     

Results of dorsal or volar plate fixation of AO type C3 distal radius fractures: a retrospective study

PURPOSE: The aim of this study was to define the outcome after dorsal or volar plating of Association for Osteosynthesis (AO) type C3 distal radius fractures based on the fracture morphology. METHODS: Twenty-nine patients with AO type C3 distal radius fractures were surgically managed between 1996 and 2005. Group 1 (n = 15) had volar plating. Group 2 (n = 14) had dorsal plating. Outcomes were evaluated at an average of 22 months after surgery. Statistical analysis was performed using the Wilcoxon test and chi-square test. RESULTS: No significant differences were seen for the scores of Gartland and Werley, Castaing, Stewart I and II, Green and O'Brien, and Disability of the Arm, Shoulder and Hand between the 2 groups. The visual and verbal pain analog scales did not show significant differences between the 2 groups. Radiology analysis showed significant difference in comparison with the contralateral side in terms of dorsopalmar inclination (3 degrees +/- 3) and distal radioulnar joint angle (98 degrees +/- 8) for the patients in group 1, whereas there were no significant differences in group 2. The development of radiographic post-traumatic arthritis was significant in both groups. Significant functional differences were seen for flexion (45 degrees +/- 15) and hand span (20 cm +/- 2) in group 1 as well as for extension (37 degrees +/- 19), flexion (42 degrees +/- 12), and radial deviation (16 degrees +/- 10) in group 2. We found more complications after dorsal plate osteosynthesis than after volar plate osteosynthesis. CONCLUSIONS: This study shows satisfactory functional and subjective outcome results in both groups. Group 1 had non-significant better functional results than group 2, whereas both groups showed good to very good radiology results.     

外固定支架结合掌侧入路治疗桡骨远端关节面骨折

目的探讨外固定支架结合掌侧人路治疗桡骨远端关节面骨折的手术指征及临床疗效。方法2000年3月～2005年3月，收治桡骨远端关节面骨折28例，采用背侧外固定支架固定于功能位，掌侧入路以钢板或克氏针固定；骨皮质粉碎或松质骨压缩者予植骨。其中男21例，女7例；年龄18～54岁，中位年龄41岁。左侧4例，右侧24例。根据AO分型标准：C2型18例，C3型10例。合并月骨周围脱位1例。结果4例失访，24例获随访6～18个月，平均8．5个月。X线片示骨折均愈合，桡骨长度无丢失；掌倾角8～16°，平均11．2°，尺偏角19～28°，平均20．8°，均无丢失。按照改良Mcbride评分和纽约骨科医院腕关节评估标准，优16例，良5例，可3例，优良率87％。结论不稳定桡骨远端骨折以及闭合复位难以纠正者应手术治疗。掌侧入路固定能降低并发症，结合外固定支架可获满意复位及功能。     

Volar plating for intra-articular fracture of the base of the proximal phalanx

Comminuted fractures involving the articular surface of the base of the proximal phalanx are relatively rare and pose a challenging problem for hand surgeons because of the difficulty in achieving an accurate reduction and secure fixation of the articular surface. These fractures usually comprise a volar base fracture associated with a central depression of the articular surface. We describe a technique for open reduction and plate fixation of intra-articular fractures of the base of the proximal phalanx through a volar A1 pulley approach. Compared with the dorsal approach, this technique offers the advantages of direct visualization of the volar base fragment and the depressed central fragment, allowing for a more accurate reduction and rigid internal fixation using a volar buttress plate. In addition, there is no interference with extensor apparatus. Although our experience is limited to 4 patients, we have had a positive experience with this technique. The technique is useful for internal fixation of intra-articular fractures of the base of the proximal phalanx.     

Barton骨折手法复位稳定性的实验研究

目的：作者通过Barton骨折模型，利用压力传感器测定骨折端压力，证实Barton骨折的手法整复原则。方法：采用4例正常青年新鲜上肢标本，采用压力传感器，直接置于骨折断端，分析不同的固定角度对骨折端稳定性的影响。结果：掌侧型Barton骨折在掌屈位时压力随固定角度的增大而增大，背伸位固定时随固定角度的增大而减小，旋后位时骨端压力比旋前位时明显增大；背侧型Barton骨折则相反。表明复位固定与受伤方向相反。断裂其对侧腕掌或腕背韧带后发现骨折断端压力变化不稳定。结论：背侧型骨折应固定在背伸位、前臂旋前位时角度越大越稳定，掌侧型骨折应固定在掌屈位、前臂旋后位时角度越大越稳定。断裂其对侧腕掌或腕背的韧带以后骨折断端的稳定性值得怀疑，大多应行手术治疗。