Development of Enteric-coated Timed-release Matrix Tablets for Colon Targeting

A new oral drug delivery system for colon targeting has been developed based on enteric-coated matrix tablets which suitably exploits both pH-sensitive and time-dependent functions. Matrix-tablets were prepared by direct compression of mixtures of hydroxyethylcellulose (HEC), a hydrophilic swellable polymer, with the inert insoluble ethylcellulose (EC) or micro-crystalline cellulose (MCC) polymers, in which theophylline, selected as model drug, was dispersed. Eudragit S100, a methacrylic acid copolymer soluble at pH 7, was used as pH-sensitive coating polymer. The influence of varying the cellulose-derivative combinations and their relative ratios as well as the level of the coating polymer was investigated. Surface morphology of the tablets was monitored by SEM analysis before and after the release test. The results of release studies, performed according to the USP basket method using a sequence of dissolution media simulating the gastrointestinal physiological pH variation, indicated that the Eudragit S100 enteric-coated matrix tablets were successful in achieving gastric resistance and timed-release of the drug, assuring an adequate lag time for the intended colonic targeting, followed by a controlled-release phase. The enteric-coating level emerged as the critical factor in determining the duration of the lag-phase, whereas the release rate mainly depended on the matrix composition. Formulations with higher HEC content showed a faster drug release rate than those with greater content in inert polymer and the MCC–HEC combinations were more effective than the corresponding EC–HEC ones. The best results were given by the 27% coated 1:0.3:0.7 (w/w) drug/MCC/HEC tablets, which, after a 260 min lag time, regularly released the drug, achieving about 90% of release after 10 h.     

Extrusion-spheronization of pH-sensitive polymeric matrix pellets for possible colonic drug delivery

The aim of this study was to investigate extrusion-spheronization pelletization for preparing pH-sensitive matrix pellets for colon-specific drug delivery. The effects of three independent variables (amounts of Eudragit S, citric acid and spheronizing time) on pellet size, shape (roundness and aspect ratio), and drug release were studied with central composite design. The pellets contained ibuprofen as a model drug, citric acid as a pH-adjusting agent, Eudragit S as a pH-sensitive binder and microcrystalline cellulose (MCC). The pellets were prepared with Nica extrusion-spheronizing equipment and subsequently enteric-coated using an air-suspension technique. Eudragit S as a pH-sensitive matrix former in pellets increased the pellet size and influenced pellet roundness. In small amounts Eudragit S increased pellet roundness but in larger amounts pellet roundness was reduced. Citric acid promoted the pelletization process resulting in a narrower area distribution. The pH-sensitive matrix pellet failed to delay the drug release. The combination of citric acid and enteric coating, however, delayed the drug release for 15 min in a pH 7.4 phosphate buffer.     

Design and optimization of colon-targeted system of theophylline for chronotherapy of nocturnal asthma

The objective of the present work was to develop a delayed-onset controlled-release colon-targeted system of theophylline, and to achieve the chronotherapy of nocturnal asthma. The formulation consisted of a core tablet containing hydroxypropyl methylcellulose used for achieving controlled release of drug, and a Eudragit S100:ethyl cellulose (EC) coating capable of delaying the drug release. The system was optimized using a 3(2) full factorial design, wherein two factors [ratio of Eudragit S100:EC and the coating level (% w/w)] were evaluated for lag time, t(50) and t(80) . The optimum formulation consisted of Eudragit S100:EC in a 60:40 ratio and a coating level of 7.5% (w/w). Results showed that the tablets prepared according to the optimized values released no drug in the upper part of gastrointestinal tract; drug release was initiated at pH 6.4 (colon) after a lag time of 5 h. In vivo evaluation (pharmacokinetic studies and roentgenography) in rabbits revealed that the tablet remained intact until it reaches the colon and the drug release was initiated after a lag time of 5 h. Thus, it can be concluded that the developed system exhibited a promising colonic targeting and hence may be used for chronotherapy of nocturnal asthma.     

In vitro release of sodium diclofenac from a central core matrix tablet aimed for colonic drug delivery.

The present study was aimed at developing a novel sodium diclofenac formulation for colonic release. The proposed delivery system consisted in a polymeric matrix tablet containing a drug central core purposely designed for obtaining a time-controlled release profile characterized by an initial phase of lag-time followed by a controlled release phase, according to zero order kinetics. The spheric central core was formed by a solid dispersion of the drug into the hydrophilic polymer PEG 4000, which enabled an improvement of drug dissolution properties with respect to other carriers such as lactose. Eudragit RS100 was used as inert polymeric matrix for the core coating, mixed (50:50, w/w) with sodium chloride and Emdex as channeling agents. Tablets containing the drug central core were prepared by direct compression, without any other excipient, and tested for dissolution properties according to the USP paddle method, under pH-gradient conditions. For both series of formulations, lag times increased with decreasing the channeling agent particle size, as a consequence of the smaller pores formed by its dissolution. However, formulations containing sodium chloride always showed longer lag times than the corresponding with Emdex and were more effective in providing prolonged zero-order release periods. This was mainly attributed to the plastic deformation properties under compression shown by sodium chloride, leading to a less porous, more compact network which more strictly controlled solvent penetration and drug dissolution and release rates. By varying the sodium chloride/Eudragit w/w ratio, it was possible to suitably modulate the length of both the lag time (for achieving colonic targeting) and zero-order release phases.     

Novel time and site specific “tablets in capsule” system for nocturnal asthma treatment

The objective of present work was to develop a “tablets in capsule” system for facilitating both immediate and pulsatile drug deliveries of theophylline to mimic the circadian rhythm of nocturnal asthma. The system comprised of capsule filled with two tablets, first pulse and second pulse tablet prepared by wet granulation method. First pulse tablet was not coated and was responsible for providing loading dose whereas; second pulse tablet was coated with Eudragit L100 and Eudragit S100 to release drug in colon after specific lag time. Two independent variables, amount of polymers and coating thickness, were optimized by 3² full factorial design. The optimum formulation consisted of Eudragit L100: Eudragit S100 in 1:1.5 ratio and coating thickness of 20 % (w/w). In vitro drug release of “tablets in capsule” system in three different media (pH 1.2, pH 6.8, and pH 7.4) revealed immediate and pulsatile release patterns.     

Influence of formulation and process variables on in vitro release of theophylline from directly-compressed Eudragit matrix tablets

Extended-release theophylline (TP) matrix tablets were prepared by direct compression of drug and different pH-dependent (Eudragit L100, S100 and L100-55) and pH-independent (Eudragit RLPO and RSPO) polymer combinations. The influence of varying the polymer/polymer (w/w) ratio and the drug incorporation method (simple blend or solid dispersion) was also evaluated. Drug release, monitored using the Through Flow Cell system, markedly depended on both the kind of Eudragit polymer combinations used and their relative content in the matrix. Maintaining a constant 1:1 (w/w) drug/polymers ratio, the selection of appropriate mixtures of pH-dependent and pH-independent polymers enabled achievement of a suitable control of TP release. In particular, matrices with a 0.7:0.3 w/w mixture of Eudragit L100-Eudragit RLPO showed highly reproducible drug release profiles, with an almost zero-order kinetic, and allowed 100% released drug after 360 min. As for the effect of the drug incorporation method, simple blending was better than the solid dispersion technique, which not only did not improve the release data reproducibility, but also caused, unexpectedly, a marked slowing down in drug release rate.     

双氯芬酸钠肠溶微丸型片剂的研制

本文制备了双氯芬酸钠肠溶微丸型片剂。以丙烯酸树脂EudragitNE30D和EudragitL30D-55不同比例的混合物作为衣膜材料，对不同粒径大小的双氯芬酸钠速释丸芯进行不同增重水平的包衣，并与不同压缩特性和用量比例的缓冲微丸混合，压片。所得的双氯芬酸钠肠溶微丸型片剂在人工胃液中2 h内累积释放百分数<10%，在人工肠液中1 h内累积释放百分数为(83±2.42)%。结果表明EudragitNE30D与EudragitL30D-55以一定比例混合制备得到适合压片的肠溶微丸，硬脂酸制备的缓冲微丸可用于微丸型片剂的制备。     

Improved drug delivery to the lower intestinal tract with tablets compression-coated with enteric/nonenteric polymer powder blends

The objective of this study was to develop pH-erosion-controlled compression-coated tablets for potential colonic drug delivery with improved gastric resistance and pulsatile release based on compression-coatings of powder blends of the enteric polymer Eudragit® L100-55 and the extended release polymer ethylcellulose. Tablet cores containing model drugs of varying solubilities (acetaminophen, carbamazepine and chlorpheniramine maleate) were compression-coated with different ratios of Eudragit® L100-55:ethylcellulose 10cP FP at different compression forces and tablet core:compression-coat ratios. The compression-coated tablets were characterized by drug release, media uptake, erosion behaviour and wettability. All drugs were released in a pulsatile fashion in higher pH-media after a lag time, which was controlled by the erosion properties of the Eudragit L:ethylcellulose compression-coating. The addition of ethylcellulose avoided premature drug release in lower pH-media and significantly increased the lag time in higher pH-media because of a reduction in wettability, media uptake and erosion of the compression-coatings. Importantly, ethylcellulose also reduced the pH-dependency of the erosion process between pH 5.5 and 7.4. The lag time could also be increased by increasing the compression force and decreasing the core:compression-coat ratio. In conclusion, tablets compression-coated with blends of Eudragit L and ethylcellulose resulted in excellent release properties for potential targeting to the lower intestinal tract with no release in lower pH-media and rapid release after a controllable lag time in higher pH-media.     

Development of enteric-coated pectin-based matrix tablets for colonic delivery of theophylline

The present work was aimed at developing a new colonic drug delivery system which takes advantage of the combined approaches of a specifically colon-biodegradable pectin matrix with a pH-sensitive Eudragit S100 polymeric coating. The developed system was able to suitably retard the onset of drug release and to provide a colon-specific delivery, thus overcoming the problems of pectin solubility in the upper gastrointestinal tract and low site-specificity of simple pH-dependent systems. Due to the poor compactability properties of pectin, it was used in mixture with Emdex, a hydrophilic directly-compressible material, in order to make it possible to prepare tablets by direct compression. Theophylline (TP) was used as model drug due to its suitable pharmacokinetic properties for colonic delivery and good absorption in the large intestine. The effects of varying the type of pectin (low and high methoxylated, or amidated), the pectin:Emdex ratio and the level of the pH-dependent polymeric coating on drug release behavior were investigated. Release tests were performed using sequential liquids simulating the physiological variation of pH and the effect of the presence or not of pectinolytic enzymes into the simulated colonic medium was evaluated. Thirty percent (w/w) was the the minimum content of Emdex for obtaining directly compressible tablets with sufficient hardness to withstand the coating process and 27% (w/w) was the minimum coating amount for obtaining an adequate lag time before the onset of drug release. After lag time, linear nearly zero-order profiles were obtained whose slope (i.e. the drug release rate) depended on both the Emdex content and the pectin type. Comparison of the results obtained in the presence or not of pectynolitic enzymes allowed selection of the high methoxylated pectin as the most interesting candidate for specific colonic delivery since it was the least water-soluble and the most susceptible to enzymatic degradation, thus assuring a greater site-specificity of drug release. Finally, the importance of using appropriate dissolution test conditions to adequately characterize the drug release profiles from delivery systems endowed with a microflora-activated drug release triggering mechanism has been demonstrated.     

Design and evaluation of pH modulated controlled release matrix systems for colon specific delivery of indomethacin

Indomethacin, a potent non steroidal anti-inflammatory drug (NSAID), is indicated for the local treatment of colorectal carcinoma. The aim of the present study was to design and investigate various matrix systems for controlled and site specific delivery of indomethacin to the colon. Various pH sensitive and hydrophobic polymers were investigated for their effect on drug release and site specificity. Effect of proportion of Eudragit L100 and Eudragit S100 in matrix either alone or in combination was evaluated. Effect of hydrophobic non-swellable polymer ethyl cellulose on the release pattern of drug from the Eudragit bases was also investigated. Matrix tablets prepared with Eudragit showed pH dependent release profile with the formulations of Eudragit L100 showing faster rate of drug release than Eudragit S100 in alkaline pH. The release profile from matrix tablets containing Eudragit L100 and Eudragit S100 in combination or with ethyl cellulose correlated well with the relative proportion of the two polymer types in the matrix base. Selected formulations when evaluated in simulated gastric fluid pH without enzymes showed negligible to low drug release (less than 10%) in the first 4-6 h followed with controlled release for 14-16 h. It was concluded that pH sensitive matrix bases in combination with a hydrophobic polymer like ethyl cellulose canbe ideal for site specific delivery of drugs to colon with controlled release profile.     

Development and release mechanism of diltiazem HCl prolonged release matrix tablets

A coated matrix tablet formulation has been used to develop controlled release diltiazem HCl (DIL) tablets. The developed drug delivery system provided prolonged drug release rates over a defined period of time. DIL tablets prepared using dry mixing and direct compression and the core consisted of hydrophilic and hydrophobic polymers such as hydroxypropylmethylcellulose (HPMC), Eudragits RLPO/RSPO, microcrystalline cellulose, and lactose. Tablets were coated with Eudragit NE 30D, and the influence of varying the inert hydrophobic polymers and the amount of the coating polymer were investigated. The release profile of the developed formulation was described by the Higuchi model. Stability trials up to 6 months displayed excellent reproducibility.     

Preparation and evaluation of a novel delayed-onset sustained-release system of propranolol hydrochloride

The objective of this work was to prepare and evaluate a new delayed-onset sustained-release system, comprising a sustained-release core tablet with hydroxypropyl methylcellulose as polymer matrix and an ethylcellulose/Eudragit L coating capable of delaying the drug release. The sustained core containing propranolol hydrochloride as the model drug was prepared by granulate tableting and the polymer coating was applied in a computer-controlled coating pan. The dissolution tests demonstrated that the in-vitro drug release was pH-dependent with sufficient gastric resistance, and the lag time (t(10%)) could be controlled by adjusting the coating level. Three dosage forms including commercial tablet, sustained-release tablet and the delayed-onset sustained-release tablet were administrated to six beagle dogs and the plasma levels of propranolol hydrochloride were measured with high-performance liquid chromatography. The delayed-onset sustained-release tablet had a lag time of 3.0 h in-vitro and 3.5 h in-vivo, and a t(max) of 7.0 h. The relative bioavailability for delayed-onset sustained-release tablet was 96.98% compared with commercial tablets. The results indicate that the new propranolol delayed-onset sustained-release system could achieve a relatively constant drug release followed by a programmed lag time, and this may provide a promising drug delivery form for chronopharmacotherapy of certain cardiovascular diseases.     

Design of pH-independent extended release matrix tablets of minocycline hydrochloride for the treatment of dementia

The aim of this study was to develop a pH-independent extended release matrix tablet of minocycline HCl for the treatment of dementia. The matrix tablets were prepared by wet granulation technique using Eudragit L and S as release modifiers at different w/w ratios (1:0, 1:1 and 0:1) and PEO as a matrix former. In the case of the matrix tablet without any release modifiers, the drug release rate at pH 1.2 was much higher than that of pH 7.4. By adding the release modifier, the drug release rate at pH 7.4 increased close to that of pH 1.2 and the pH-independent release was obtained. In addition, it was shown that lubricants containing a divalent cation such as Mg stearate inhibited minocycline release in basic medium. Therefore, the incorporation of Eudragit L and S (1:1 ratio) as release modifiers and Na stearyl fumarate as a lubricant into PEO-based matrix tablets effectively produced pH-independent minocycline release profiles.     

Microspheres with pH modulated release: design and characterization of formulation variables for colonic delivery

The aim of this study was to design and develop microspheres of indomethacin with pH and transit time dependent release properties for achieving targeted delivery to the colon. Microspheres containing varying proportions of ethyl cellulose and Eudragit (L100 or S100) either alone or in combination were prepared using an oil-in-oil emulsion-based solvent evaporation technique. System comprising of acetone (internal phase) and liquid paraffin (external phase) in the ratio of 1 : 1 and 1 : 9 yielded microspheres with good physical properties (spherical and discrete), high drug loading (70-80%) and entrapment efficiency (70-85%). The lag time in the initial release depended on the proportion of pH-sensitive polymer Eudragit, while the duration of indomethacin release from microspheres was found to be directly proportional to proportion of the total polymer. Thus, a pH- and time-modulated sigmoidal release pattern could be observed in optimized formulations with less than 10% drug release in 4-6 h followed by controlled release extending up to 14-16 h.     

Combination of time-dependent and pH-dependent polymethacrylates as a single coating formulation for colonic delivery of indomethacin pellets

The objective of this study was to evaluate the combination of pH-dependent and time-dependent polymers as a single coating for design of colon delivery system of indomethacin pellets. Eudragit S100 and Eudragit L100 were used as pH-dependent polymers and Eudragit RS was used as a time-dependent polymer. A statistical full factorial design was used in order to optimize formulations. Factors studied in design were percent of Eudragit RS in combination with Eudragit S and L and coating level. Dissolution studies of pellets in the media with different pH (1.2, 6.5, 6.8 and 7.2) showed that drug release in colon could be controlled by addition of Eudragit RS to the pH-dependent polymers. The lag time prior to drug release was highly affected by coating level. With combination of two factors, i.e. the percent of Eudragit RS and coating level, the optimum formulation was found to be the one containing 20% Eudragit RS, 64% Eudragit S and 16% Eudragit L, and a coating level of 10%. This formulation was reproduced and tested in continuous condition of dissolution, and also separately at pH 7.5. The results of in vitro experiments indicate that the proposed combined time-dependent and pH-dependent polymethacrylate polymer coating may provide a colonic delivery system for indomethacin.     

Design of pH-independent controlled release matrix tablets for acidic drugs

The rate and extent of drug release from most controlled release systems are influenced by the pH of the dissolution medium for drugs with pH-dependent solubility. This dependency of drug release on pH may lead to additional inter- and intra-subject variability in drug absorption. In the present study, a pH-independent controlled release matrix system for acidic drugs was designed by incorporating release-modifiers in the formulation. Controlled release matrix tablets were prepared by compression of divalproex sodium, Methocel K4M and Eudragit E 100 or Fujicalin as the release-modifier. For formulations without any release-modifier, the extent and rate of drug release at pH 6.8 was much higher than that at pH 1.0. Formulations containing Eudragit E 100 provided drug release that was essentially independent of pH. This was achieved because Eudragit E 100 significantly increased the drug release in acidic medium and slightly decreased the release rate at higher pH. The increased release in the acidic medium can be attributed to the elevation of the micro-environmental pH in the swollen polymer gel layer. Formulations containing Fujicalin were less effective than those containing Eudragit E 100. This was attributed to the relative inability to elevate the pH and shorter residence time of Fujicalin in the matrix relative to Eudragit E 100.     

Suitability of κ-carrageenan pellets for the formulation of multiparticulate tablets with modified release

κ-Carrageenan is a novel pelletisation aid with high formulation robustness and quick disintegration leading to fast drug release unlike the matrix-like release from non-disintegrating microcrystalline cellulose pellets. Compression of pellets into tablets is cost effective. The feasibility of formulating multiparticulate tablets with coated κ-carrageenan pellets was investigated. Pellets containing a highly soluble drug in acid, namely bisacodyl and κ-carrageenan or MCC as pelletisation aid were prepared, enteric coated with a mixture of Kollicoat(?) MAE 30 DP and Eudragit(?) NE 30 D and compressed using silicified microcrystalline cellulose as embedding powder. The effect of coating level, type of pellet core, compression force and punch configurations on drug release were studied. A sufficient coating thickness for κ-carrageenan pellets was necessary to obtain multiparticulate tablets with adequate resistance in the acid stage regardless of the compression pressure used. While κ-carrageenan pellets and their tablets released over 80% of the drug during the neutral stage only about 20-24% was released from MCC pellets and their tablets. The type of punches used (oblong or round) did not significantly influence the drug release from the prepared tablets. Moreover, sufficient prolonged release properties were obtained with κ-carrageenan pellets containing theophylline as a model drug and coated with Kollicoat(?) SR 30 D using Kollicoat(?) IR as pore former. A lower coating level and higher amount of pore former were needed in case of theophylline pellets formulated with MCC as pelletisation aid. The sustained release properties of both coated pellet formulations were maintained after compression at different compression pressures.     

Statistical optimization of indomethacin pellets coated with pH-dependent methacrylic polymers for possible colonic drug delivery

The objective of this study was to evaluate the effect of two factors (ratio of Eudragit S100 and Eudragit L100 and the coating level) on indomethacin release from pellets in order to optimize coating formulations for colonic delivery. Coating formulations were designed based on the full factorial design. Two independent variables were the ratio of Eudragit S100:Eudragit L100 (1:4, 1:1 and 1:0) and the level of coating (10%, 15% and 20%, w/w), respectively. The evaluated responses were lag time prior to drug release at pH 6.8 (the time required for drug release up to 2%) and percent of drug release at pH 6.8 in 5h. Polymers were coated onto the pellets containing 20% (w/w) indomethacin, using a fluidized bed coating apparatus. Dissolution test was carried out in media with different pH (1.2, 6.5, 6.8 and 7.2). The dissolution data revealed that the level of coating and the ratio of polymers are very important to achieve optimum formulation. Using responses and resulted statistical equations, optimum formulation consisted of Eudragit S100:L100 in 4:1 ratio and the level of coating (20%) was predicted. Practical results showed that the pellets prepared according to above formulation released no indomethacin at pH 1.2 (simulating stomach pH) and pH 6.5 (simulating proximal part of small intestine pH); drug release was slowly at pH 6.8 (simulating lower part of small intestine pH), but it was fast at pH 7.2 (simulating terminal ileum pH). The results of this study revealed that factorial design is a suitable tool for optimization of coating formulations to achieve colon delivery. It was shown that coating formulation consisted of Eudragit S100:Eudragit L100 in 4:1 ratio at 20% coating level has potential for colonic delivery of indomethacin loaded pellets. The optimized formulation produced dissolution profiles that were close to predicted values.     

Design,development and in vitro-in vivo study of a colon-specific fast disintegrating tablet

Objective: Targeted delivery systems for the treatment of Inflammatory bowel disease (IBD) are designed to increase local tissue concentrations of anti-inflammatory drugs from lower doses compared with systemic administration. The objective of this study was to formulate and evaluate an oral system designed to achieve site-specific and instant drug release in the colon for effective treatment of IBD.

Materials and methods: The system consists of a core tablet containing the model drug diclofenac sodium, superdisintegrant sodium starch glycolate, and coated with enteric polymer Eudragit FS 30 D to achieve different total percentage weight gain. Drug release studies were carried out using a changing pH method. A placebo formulation containing barium sulphate in the tablet was administered to human volunteers for in vivo X-ray studies. SEM studies were performed to determine coating thickness and film topography.

Results: In vitro studies revealed that the tablet with 10% coating level released the drug after 5?h lag time corresponding to the colonic region. Tablets with 10% coating level could maintain their integrity in human volunteers for 5?h, approximating colon arrival time and release the drug instantaneously.

Discussion: Colon-targeting and instant drug release for 10% coating level was due to the dissolution of the Eudragit FS 30 D and the immediate release effect of superdisintegrant. It was observed that as the coating level increased, the lag time also increased. This was because of increased diffusion path length and tortuosity at higher coating levels.

Conclusion: An in vivo-in vitro study revealed that not only the sensitivity of the polymer to the pH environment but also the thickness of coating plays an important role in colon delivery and the tablet with 5% superdisintegrant and 10% coating level achieved the desired performance of the colon targeting.     

Delayed-release tablets using hydroxyethylcellulose as a gel-forming matrix

Delayed-release tablets containing diltiazem hydrochloride (DIL) were prepared by using CM-type hydroxyethylcellulose (HEC) of three viscosity grades. The tablets consisted of a core containing 30 mg of DIL and an outer shell formed by compressing HEC. DIL in the core was rapidly released from the tablets after a lag time of several hours in all cases. The lag time to the start of release of DIL was more prolonged with an increase in viscosity of CM-type HEC. The rate of water-uptake was greater in the CM-L4 type HEC tablet of a low viscosity grade (14 cps) than those in CM-L3 and CM-L2 type HEC (27 and 95 cps, respectively) tablets. There was little difference in lag time to the start of release of DIL from CM-type HEC tablets between JP XII 1st (pH 1.2) and 2nd (pH 6.8) fluids. A human volunteer study was performed using the delayed-release tablets prepared with CM-type HEC of two or three viscosity grades. The t_maxand MRT values of CM-type HEC tablets were significantly increased with an increase in viscosity of HEC and showed only small variations between subjects, respectively. On the other hand, although the AUC values were almost the same, the C_max values decreased with prolongation of lag time. The lag time in vivo for appearance of DIL in the blood corresponded well to the lag time in vitro for drug release, but tended to be shortened as compared with the lag time in vitro. These results indicate that the lag time can be optionally controlled by selecting HEC with a proper viscosity and/or by changing the amount of HEC forming the outer shell. This delayed-release tablet using HEC will be useful for control of time-related symptoms which need time-controlled or site-specific delivery in the gastrointestinal tract.